static long matv_ioctl(struct file *file, unsigned int cmd, unsigned long arg)
{
int *user_data_addr;
long ret = 0;
U8 *pReadData = 0;
U8 *pWriteData = 0;
U8 *ptr;
U8 reg8, bAutoInc;
U16 len;
switch(cmd)
{
case TEST_MATV_PRINT :
MATV_LOGD("**** mt519x matv ioctl : test\n");
break;
case MATV_READ:
user_data_addr = (int *)arg;
ret = copy_from_user(matv_in_data, user_data_addr, 4);
ptr = (U8*)matv_in_data;
reg8 = ptr[0];
bAutoInc = ptr[1];
len = ptr[2];
len+= ((U16)ptr[3])<<8;
//MATV_LOGD("**** mt519x matv ioctl : read length = %d\n",len);
#ifdef _MATV_HIGH_SPEED_DMA_
pReadData = gpDMABuf_va;
pa_addr = gpDMABuf_pa;
if(!pReadData){
MATV_LOGE("[Error] dma_alloc_coherent failed!\n");
break;
}
mt519x_dma_read_m_byte(reg8, pReadData, pa_addr, len, bAutoInc);
ret = copy_to_user(user_data_addr, pReadData, len);
#else
pReadData = (U8 *)kmalloc(len,GFP_ATOMIC);
if(!pReadData){
MATV_LOGE("[Error] kmalloc failed!\n");
break;
}
mt519x_read_m_byte(reg8, pReadData, len, bAutoInc);
ret = copy_to_user(user_data_addr, pReadData, len);
if(pReadData)
kfree(pReadData);
#endif //#ifdef _MATV_HIGH_SPEED_DMA_
break;
case MATV_WRITE:
user_data_addr = (int *)arg;
ret = copy_from_user(matv_in_data, user_data_addr, 4);
ptr = (U8*)matv_in_data;
reg8 = ptr[0];
bAutoInc = ptr[1];
len = ptr[2];
len+= ((U16)ptr[3])<<8;
//MATV_LOGD("**** mt519x matv ioctl : write length = %d\n",len);
#ifdef _MATV_HIGH_SPEED_DMA_
pWriteData = gpDMABuf_va;
pa_addr = gpDMABuf_pa;
if(!pWriteData){
MATV_LOGE("[Error] dma_alloc_coherent failed!\n");
break;
}
ret = copy_from_user(pWriteData+1, ((void*)user_data_addr)+4, len);
//printk("\n[MATV]Write data = %d\n",*(pWriteData+1));
mt519x_dma_write_m_byte(reg8, pWriteData, pa_addr, len, bAutoInc);
#else
pWriteData = (U8 *)kmalloc(len,GFP_ATOMIC);
if(!pWriteData){
MATV_LOGE("[Error] kmalloc failed!\n");
break;
}
ret = copy_from_user(pWriteData, ((void*)user_data_addr)+4, len);
//printk("\n[MATV]Write data = %d\n",*pWriteData);
mt519x_write_m_byte(reg8, pWriteData, len, bAutoInc);
//ret = copy_to_user(user_data_addr, pReadData, len);
if(pWriteData)
kfree(pWriteData);
#endif //#ifdef _MATV_HIGH_SPEED_DMA_
break;
case MATV_SET_PWR:
user_data_addr = (int *)arg;
ret = copy_from_user(matv_in_data, user_data_addr, sizeof(int));
//MATV_LOGD("**** mt519x matv ioctl : set pwr = %d\n",user_data_addr[0]);
#ifdef GPIO_MATV_PWR_ENABLE
if(matv_in_data[0]!=0)
mt_set_gpio_out(GPIO_MATV_PWR_ENABLE, GPIO_OUT_ONE);
else
mt_set_gpio_out(GPIO_MATV_PWR_ENABLE, GPIO_OUT_ZERO);
#endif
break;
case MATV_SET_RST:
user_data_addr = (int *)arg;
ret = copy_from_user(matv_in_data, user_data_addr, sizeof(int));
//MATV_LOGD("**** mt519x matv ioctl : set rst = %d\n",user_data_addr[0]);
#ifdef GPIO_MATV_N_RST
if(matv_in_data[0]!=0){
mt_set_gpio_out(GPIO_MATV_N_RST, GPIO_OUT_ONE);
}
else
mt_set_gpio_out(GPIO_MATV_N_RST, GPIO_OUT_ZERO);
#endif
break;
case MATV_SET_STRAP:
user_data_addr = (int *)arg;
ret = copy_from_user(matv_in_data, user_data_addr, sizeof(int));
#ifdef GPIO_MATV_I2S_DAT_PIN
if(matv_in_data[0]==0){
//Enable I2D Data pin and pull low
mt_set_gpio_mode(GPIO_MATV_I2S_DAT_PIN,GPIO_MODE_00);
mt_set_gpio_dir(GPIO_MATV_I2S_DAT_PIN, GPIO_DIR_OUT);
mt_set_gpio_pull_enable(GPIO_MATV_I2S_DAT_PIN,true);
mt_set_gpio_out(GPIO_MATV_I2S_DAT_PIN, GPIO_OUT_ZERO);
printk("force I2s data pin low \n");
//~
}
else if (matv_in_data[0]==1) {
//Disable I2D Data pin
#ifdef GPIO_MATV_I2S_DAT_PIN_M_I2S0_DAT
mt_set_gpio_mode(GPIO_MATV_I2S_DAT_PIN,GPIO_MATV_I2S_DAT_PIN_M_I2S0_DAT);
#endif
#ifdef GPIO_MATV_I2S_DAT_PIN_M_I2SIN_DAT
mt_set_gpio_mode(GPIO_MATV_I2S_DAT_PIN,GPIO_MATV_I2S_DAT_PIN_M_I2SIN_DAT);
#endif
mt_set_gpio_pull_enable(GPIO_MATV_I2S_DAT_PIN,false);
mt_set_gpio_out(GPIO_MATV_I2S_DAT_PIN, GPIO_OUT_ZERO);
printk("put I2S data pin back \n");
//~
}
#else
MATV_LOGD("**** mt519x ioctl : GPIO_MATV_I2S_DAT_PIN is not defined!!!!!!!!!\\n");
#endif
break;
case MATV_SLEEP:
{
long timeout_jiff;
static wait_queue_head_t matvWaitQueue;
struct timeval t1,t2;
int time_diff = 0;
int timeOut = 0;
init_waitqueue_head(&matvWaitQueue);
user_data_addr = (int *)arg;
ret = copy_from_user(matv_in_data, user_data_addr, sizeof(int));
timeout_jiff = (matv_in_data[0]+2) * HZ / 1000; // wait 80 ms
do_gettimeofday(&t1);
timeOut = wait_event_interruptible_timeout(matvWaitQueue, NULL, timeout_jiff);
if(0 != timeOut)
MATV_LOGE("[MATV] Fail to sleep enough time %d\n", timeOut);
do_gettimeofday(&t2);
time_diff = (t2.tv_sec - t1.tv_sec)*1000000 + (t2.tv_usec - t1.tv_usec);
if (time_diff < (matv_in_data[0]-2)*1000){
//MATV_LOGE("[MATV]TimeDiff=%d\n",time_diff);
udelay(matv_in_data[0]*1000 - time_diff);
}
}
break;
case MATV_SET_TP_MODE:
{
user_data_addr = (int *)arg;
ret = copy_from_user(matv_in_data, user_data_addr, sizeof(int));
MATV_LOGD("[MATV]MATV_SET_TP_MODE = %d\n",matv_in_data[0]);
if(matv_in_data[0] == 0)
{
tpd_switch_single_mode();
}
else if(matv_in_data[0] == 1)
{
tpd_switch_multiple_mode();
}
else if(matv_in_data[0] == 2)
{
tpd_switch_sleep_mode();
}
else if(matv_in_data[0] == 3)
{
tpd_switch_normal_mode();
}
else
{
MATV_LOGE("[MATV] TP's mode value(%d) is wrong!\n",matv_in_data[0]);
}
}
break;
case MATV_QUERY_I2S_INFO:
{
user_data_addr = (int *)arg;
ret = copy_to_user(user_data_addr, &i2s_info, sizeof(i2s_info));
}
break;
default:
break;
}
return 0;
}
static int matv_resume(struct platform_device *dev)
{
MATV_LOGD("[MATV] resume\n");
return 0;
}
static void matv_shutdown(struct platform_device *dev)
{
MATV_LOGD("[MATV] shutdown\n");
}
static int matv_suspend(struct platform_device *dev, pm_message_t state)
{
MATV_LOGD("[MATV] suspend\n");
return 0;
}
static int matv_probe(struct platform_device *dev)
{
MATV_LOGD(KERN_ERR "[MATV] probe done\n");
return 0;
}
