static int mips32_pracc_read_u32(struct mips_ejtag *ejtag_info, uint32_t addr, uint32_t *buf)
{
static const uint32_t code[] = {
/* start: */
MIPS32_MTC0(15, 31, 0), /* move $15 to COP0 DeSave */
MIPS32_LUI(15, UPPER16(MIPS32_PRACC_STACK)), /* $15 = MIPS32_PRACC_STACK */
MIPS32_ORI(15, 15, LOWER16(MIPS32_PRACC_STACK)),
MIPS32_SW(8, 0, 15), /* sw $8,($15) */
MIPS32_LW(8, NEG16(MIPS32_PRACC_STACK-MIPS32_PRACC_PARAM_IN), 15), /* load R8 @ param_in[0] = address */
MIPS32_LW(8, 0, 8), /* lw $8,0($8), Load $8 with the word @mem[$8] */
MIPS32_SW(8, NEG16(MIPS32_PRACC_STACK - MIPS32_PRACC_PARAM_OUT), 15), /* store R8 @ param_out[0] */
MIPS32_LW(8, 0, 15), /* lw $8,($15) */
MIPS32_B(NEG16(9)), /* b start */
MIPS32_MFC0(15, 31, 0), /* move COP0 DeSave to $15 */
};
int retval = ERROR_OK;
uint32_t param_in[1];
param_in[0] = addr;
retval = mips32_pracc_exec(ejtag_info, ARRAY_SIZE(code), code,
ARRAY_SIZE(param_in), param_in, 1, buf, 1);
if (retval != ERROR_OK)
return retval;
return retval;
}
int mips32_pracc_write_u32(struct mips_ejtag *ejtag_info, uint32_t addr, uint32_t *buf)
{
static const uint32_t code[] = {
/* start: */
MIPS32_MTC0(15,31,0), /* move $15 to COP0 DeSave */
MIPS32_LUI(15,UPPER16(MIPS32_PRACC_STACK)), /* $15 = MIPS32_PRACC_STACK */
MIPS32_ORI(15,15,LOWER16(MIPS32_PRACC_STACK)),
MIPS32_SW(8,0,15), /* sw $8,($15) */
MIPS32_SW(9,0,15), /* sw $9,($15) */
MIPS32_LW(8,NEG16((MIPS32_PRACC_STACK-MIPS32_PRACC_PARAM_IN)-4), 15), /* load R8 @ param_in[1] = data */
MIPS32_LW(9,NEG16(MIPS32_PRACC_STACK-MIPS32_PRACC_PARAM_IN), 15), /* load R9 @ param_in[0] = address */
MIPS32_SW(8,0,9), /* sw $8,0($9) */
MIPS32_LW(9,0,15), /* lw $9,($15) */
MIPS32_LW(8,0,15), /* lw $8,($15) */
MIPS32_B(NEG16(11)), /* b start */
MIPS32_MFC0(15,31,0), /* move COP0 DeSave to $15 */
};
/* TODO remove array */
uint32_t param_in[1 + 1];
param_in[0] = addr;
param_in[1] = *buf;
mips32_pracc_exec(ejtag_info, ARRAY_SIZE(code), code, \
ARRAY_SIZE(param_in), param_in, 0, NULL, 1);
return ERROR_OK;
}
int mips32_pracc_write_mem8(struct mips_ejtag *ejtag_info, uint32_t addr, int count, uint8_t *buf)
{
static const uint32_t code[] = {
/* start: */
MIPS32_MTC0(15,31,0), /* move $15 to COP0 DeSave */
MIPS32_LUI(15,UPPER16(MIPS32_PRACC_STACK)), /* $15 = MIPS32_PRACC_STACK */
MIPS32_ORI(15,15,LOWER16(MIPS32_PRACC_STACK)),
MIPS32_SW(8,0,15), /* sw $8,($15) */
MIPS32_SW(9,0,15), /* sw $9,($15) */
MIPS32_SW(10,0,15), /* sw $10,($15) */
MIPS32_SW(11,0,15), /* sw $11,($15) */
MIPS32_LUI(8,UPPER16(MIPS32_PRACC_PARAM_IN)), /* $8 = MIPS32_PRACC_PARAM_IN */
MIPS32_ORI(8,8,LOWER16(MIPS32_PRACC_PARAM_IN)),
MIPS32_LW(9,0,8), /* Load write addr to $9 */
MIPS32_LW(10,4,8), /* Load write count to $10 */
MIPS32_ADDI(8,8,8), /* $8 += 8 */
/* loop: */
MIPS32_BEQ(0,10,8), /* beq $0, $10, end */
MIPS32_NOP,
MIPS32_LW(11,0,8), /* lw $11,0($8), Load $11 with the word @mem[$8] */
MIPS32_SB(11,0,9), /* sb $11,0($9) */
MIPS32_ADDI(10,10,NEG16(1)), /* $10-- */
MIPS32_ADDI(9,9,1), /* $9 += 1 */
MIPS32_ADDI(8,8,4), /* $8 += 4 */
MIPS32_B(NEG16(8)), /* b loop */
MIPS32_NOP,
/* end: */
MIPS32_LW(11,0,15), /* lw $11,($15) */
MIPS32_LW(10,0,15), /* lw $10,($15) */
MIPS32_LW(9,0,15), /* lw $9,($15) */
MIPS32_LW(8,0,15), /* lw $8,($15) */
MIPS32_B(NEG16(26)), /* b start */
MIPS32_MFC0(15,31,0), /* move COP0 DeSave to $15 */
};
/* TODO remove array */
uint32_t *param_in = malloc((count + 2) * sizeof(uint32_t));
int retval;
int i;
param_in[0] = addr;
param_in[1] = count;
for (i = 0; i < count; i++)
{
param_in[i + 2] = buf[i];
}
retval = mips32_pracc_exec(ejtag_info, ARRAY_SIZE(code), code, \
count + 2, param_in, 0, NULL, 1);
free(param_in);
return retval;
}
int mips32_cp0_read(struct mips_ejtag *ejtag_info, uint32_t *val, uint32_t cp0_reg, uint32_t cp0_sel)
{
/**
* Do not make this code static, but regenerate it every time,
* as 5th element has to be changed to add parameters
*/
uint32_t code[] = {
/* start: */
MIPS32_MTC0(15, 31, 0), /* move $15 to COP0 DeSave */
MIPS32_LUI(15, UPPER16(MIPS32_PRACC_STACK)), /* $15 = MIPS32_PRACC_STACK */
MIPS32_ORI(15, 15, LOWER16(MIPS32_PRACC_STACK)),
MIPS32_SW(8, 0, 15), /* sw $8,($15) */
MIPS32_SW(9, 0, 15), /* sw $9,($15) */
/* 5 */ MIPS32_MFC0(8, 0, 0), /* move COP0 [cp0_reg select] to $8 */
MIPS32_LUI(9, UPPER16(MIPS32_PRACC_PARAM_OUT)), /* $11 = MIPS32_PRACC_PARAM_OUT */
MIPS32_ORI(9, 9, LOWER16(MIPS32_PRACC_PARAM_OUT)),
MIPS32_SW(8, 0, 9), /* sw $8,0($9) */
MIPS32_LW(9, 0, 15), /* lw $9,($15) */
MIPS32_LW(8, 0, 15), /* lw $8,($15) */
MIPS32_B(NEG16(12)), /* b start */
MIPS32_MFC0(15, 31, 0), /* move COP0 DeSave to $15 */
};
/**
* Note that our input parametes cp0_reg and cp0_sel
* are numbers (not gprs) which make part of mfc0 instruction opcode.
*
* These are not fix, but can be different for each mips32_cp0_read() function call,
* and that is why we must insert them directly into opcode,
* i.e. we can not pass it on EJTAG microprogram stack (via param_in),
* and put them into the gprs later from MIPS32_PRACC_STACK
* because mfc0 do not use gpr as a parameter for the cp0_reg and select part,
* but plain (immediate) number.
*
* MIPS32_MTC0 is implemented via MIPS32_R_INST macro.
* In order to insert our parameters, we must change rd and funct fields.
*/
code[5] |= (cp0_reg << 11) | cp0_sel; /* change rd and funct of MIPS32_R_INST macro */
/* TODO remove array */
uint32_t *param_out = val;
int retval;
retval = mips32_pracc_exec(ejtag_info, ARRAY_SIZE(code), code, 0, NULL, 1, param_out, 1);
return retval;
}
static int mips32_pracc_write_mem32(struct mips_ejtag *ejtag_info, uint32_t addr, int count, uint32_t *buf)
{
static const uint32_t code[] = {
/* start: */
MIPS32_MTC0(15,31,0), /* move $15 to COP0 DeSave */
MIPS32_LUI(15,UPPER16(MIPS32_PRACC_STACK)), /* $15 = MIPS32_PRACC_STACK */
MIPS32_ORI(15,15,LOWER16(MIPS32_PRACC_STACK)),
MIPS32_SW(8,0,15), /* sw $8,($15) */
MIPS32_SW(9,0,15), /* sw $9,($15) */
MIPS32_SW(10,0,15), /* sw $10,($15) */
MIPS32_SW(11,0,15), /* sw $11,($15) */
MIPS32_ADDI(8,15,NEG16(MIPS32_PRACC_STACK-MIPS32_PRACC_PARAM_IN)), /* $8= MIPS32_PRACC_PARAM_IN */
MIPS32_LW(9,0,8), /* Load write addr to $9 */
MIPS32_LW(10,4,8), /* Load write count to $10 */
MIPS32_ADDI(8,8,8), /* $8 += 8 beginning of data */
/* loop: */
MIPS32_LW(11,0,8), /* lw $11,0($8), Load $11 with the word @mem[$8] */
MIPS32_SW(11,0,9), /* sw $11,0($9) */
MIPS32_ADDI(9,9,4), /* $9 += 4 */
MIPS32_BNE(10,9,NEG16(4)), /* bne $10, $9, loop */
MIPS32_ADDI(8,8,4), /* $8 += 4 */
/* end: */
MIPS32_LW(11,0,15), /* lw $11,($15) */
MIPS32_LW(10,0,15), /* lw $10,($15) */
MIPS32_LW(9,0,15), /* lw $9,($15) */
MIPS32_LW(8,0,15), /* lw $8,($15) */
MIPS32_B(NEG16(21)), /* b start */
MIPS32_MFC0(15,31,0), /* move COP0 DeSave to $15 */
};
/* TODO remove array */
uint32_t *param_in = malloc((count + 2) * sizeof(uint32_t));
param_in[0] = addr;
param_in[1] = addr + (count * sizeof(uint32_t)); /* last address */
memcpy(¶m_in[2], buf, count * sizeof(uint32_t));
int retval;
retval = mips32_pracc_exec(ejtag_info, ARRAY_SIZE(code), code,
count + 2, param_in, 0, NULL, 1);
free(param_in);
return retval;
}
/**
* \b mips32_pracc_sync_cache
*
* Synchronize Caches to Make Instruction Writes Effective
* (ref. doc. MIPS32 Architecture For Programmers Volume II: The MIPS32 Instruction Set,
* Document Number: MD00086, Revision 2.00, June 9, 2003)
*
* When the instruction stream is written, the SYNCI instruction should be used
* in conjunction with other instructions to make the newly-written instructions effective.
*
* Explanation :
* A program that loads another program into memory is actually writing the D- side cache.
* The instructions it has loaded can't be executed until they reach the I-cache.
*
* After the instructions have been written, the loader should arrange
* to write back any containing D-cache line and invalidate any locations
* already in the I-cache.
*
* You can do that with cache instructions, but those instructions are only available in kernel mode,
* and a loader writing instructions for the use of its own process need not be privileged software.
*
* In the latest MIPS32/64 CPUs, MIPS provides the synci instruction,
* which does the whole job for a cache-line-sized chunk of the memory you just loaded:
* That is, it arranges a D-cache write-back and an I-cache invalidate.
*
* To employ synci at user level, you need to know the size of a cache line,
* and that can be obtained with a rdhwr SYNCI_Step
* from one of the standard “hardware registers”.
*/
static int mips32_pracc_sync_cache(struct mips_ejtag *ejtag_info,
uint32_t start_addr, uint32_t end_addr)
{
static const uint32_t code[] = {
/* start: */
MIPS32_MTC0(15, 31, 0), /* move $15 to COP0 DeSave */
MIPS32_LUI(15, UPPER16(MIPS32_PRACC_STACK)), /* $15 = MIPS32_PRACC_STACK */
MIPS32_ORI(15, 15, LOWER16(MIPS32_PRACC_STACK)),
MIPS32_SW(8, 0, 15), /* sw $8,($15) */
MIPS32_SW(9, 0, 15), /* sw $9,($15) */
MIPS32_SW(10, 0, 15), /* sw $10,($15) */
MIPS32_SW(11, 0, 15), /* sw $11,($15) */
MIPS32_LUI(8, UPPER16(MIPS32_PRACC_PARAM_IN)), /* $8 = MIPS32_PRACC_PARAM_IN */
MIPS32_ORI(8, 8, LOWER16(MIPS32_PRACC_PARAM_IN)),
MIPS32_LW(9, 0, 8), /* Load write start_addr to $9 */
MIPS32_LW(10, 4, 8), /* Load write end_addr to $10 */
MIPS32_RDHWR(11, MIPS32_SYNCI_STEP), /* $11 = MIPS32_SYNCI_STEP */
MIPS32_BEQ(11, 0, 6), /* beq $11, $0, end */
MIPS32_NOP,
/* synci_loop : */
MIPS32_SYNCI(0, 9), /* synci 0($9) */
MIPS32_SLTU(8, 10, 9), /* sltu $8, $10, $9 # $8 = $10 < $9 ? 1 : 0 */
MIPS32_BNE(8, 0, NEG16(3)), /* bne $8, $0, synci_loop */
MIPS32_ADDU(9, 9, 11), /* $9 += MIPS32_SYNCI_STEP */
MIPS32_SYNC,
/* end: */
MIPS32_LW(11, 0, 15), /* lw $11,($15) */
MIPS32_LW(10, 0, 15), /* lw $10,($15) */
MIPS32_LW(9, 0, 15), /* lw $9,($15) */
MIPS32_LW(8, 0, 15), /* lw $8,($15) */
MIPS32_B(NEG16(24)), /* b start */
MIPS32_MFC0(15, 31, 0), /* move COP0 DeSave to $15 */
};
/* TODO remove array */
uint32_t *param_in = malloc(2 * sizeof(uint32_t));
int retval;
param_in[0] = start_addr;
param_in[1] = end_addr;
retval = mips32_pracc_exec(ejtag_info, ARRAY_SIZE(code), code, 2, param_in, 0, NULL, 1);
free(param_in);
return retval;
}
int mips32_cp0_write(struct mips_ejtag *ejtag_info,
uint32_t val, uint32_t cp0_reg, uint32_t cp0_sel)
{
uint32_t code[] = {
/* start: */
MIPS32_MTC0(15, 31, 0), /* move $15 to COP0 DeSave */
MIPS32_LUI(15, UPPER16(MIPS32_PRACC_STACK)), /* $15 = MIPS32_PRACC_STACK */
MIPS32_ORI(15, 15, LOWER16(MIPS32_PRACC_STACK)),
MIPS32_SW(8, 0, 15), /* sw $8,($15) */
MIPS32_SW(9, 0, 15), /* sw $9,($15) */
MIPS32_LUI(8, UPPER16(MIPS32_PRACC_PARAM_IN)), /* $8 = MIPS32_PRACC_PARAM_IN */
MIPS32_ORI(8, 8, LOWER16(MIPS32_PRACC_PARAM_IN)),
MIPS32_LW(9, 0, 8), /* Load write val to $9 */
/* 8 */ MIPS32_MTC0(9, 0, 0), /* move $9 to COP0 [cp0_reg select] */
MIPS32_LW(9, 0, 15), /* lw $9,($15) */
MIPS32_LW(8, 0, 15), /* lw $8,($15) */
MIPS32_B(NEG16(12)), /* b start */
MIPS32_MFC0(15, 31, 0), /* move COP0 DeSave to $15 */
};
/**
* Note that MIPS32_MTC0 macro is implemented via MIPS32_R_INST macro.
* In order to insert our parameters, we must change rd and funct fields.
*/
code[8] |= (cp0_reg << 11) | cp0_sel; /* change rd and funct fields of MIPS32_R_INST macro */
/* TODO remove array */
uint32_t *param_in = malloc(1 * sizeof(uint32_t));
int retval;
param_in[0] = val;
retval = mips32_pracc_exec(ejtag_info, ARRAY_SIZE(code), code, 1, param_in, 0, NULL, 1);
free(param_in);
return retval;
}
static int ath79_spi_bitbang_codegen(struct ath79_flash_bank *ath79_info,
struct pracc_queue_info *ctx,
uint8_t *data, int len,
int partial_xfer)
{
uint32_t cs_high = ATH79_SPI_CS_ALLHI;
uint32_t cs_low = ath79_chipselects[ath79_info->chipselect];
uint32_t clock_high = cs_low | ATH79_SPI_CE_HI;
uint32_t clock_low = cs_low;
uint32_t pracc_out = 0;
uint32_t io_base = ath79_info->io_base;
const uint32_t preamble1[] = {
/* $15 = MIPS32_PRACC_BASE_ADDR */
MIPS32_LUI(0, 15, PRACC_UPPER_BASE_ADDR),
/* $1 = io_base */
MIPS32_LUI(0, 1, UPPER16(io_base)),
};
ath79_pracc_addn(ctx, preamble1, ARRAY_SIZE(preamble1));
if (ath79_info->spi.pre_deselect) {
/* Clear deselect flag so we don't deselect again if
* this is a partial xfer.
*/
ath79_info->spi.pre_deselect = 0;
const uint32_t pre_deselect[] = {
/* [$1 + FS] = 1 (enable flash io register access) */
MIPS32_LUI(0, 2, UPPER16(1)),
MIPS32_ORI(0, 2, 2, LOWER16(1)),
MIPS32_SW(0, 2, ATH79_REG_FS, 1),
/* deselect flash just in case */
/* $2 = SPI_CS_DIS */
MIPS32_LUI(0, 2, UPPER16(cs_high)),
MIPS32_ORI(0, 2, 2, LOWER16(cs_high)),
/* [$1 + WRITE] = $2 */
MIPS32_SW(0, 2, ATH79_REG_WRITE, 1),
};
ath79_pracc_addn(ctx, pre_deselect, ARRAY_SIZE(pre_deselect));
}
const uint32_t preamble2[] = {
/* t0 = CLOCK_LOW + 0-bit */
MIPS32_LUI(0, 8, UPPER16((clock_low + 0))),
MIPS32_ORI(0, 8, 8, LOWER16((clock_low + 0))),
/* t1 = CLOCK_LOW + 1-bit */
MIPS32_LUI(0, 9, UPPER16((clock_low + 1))),
MIPS32_ORI(0, 9, 9, LOWER16((clock_low + 1))),
/* t2 = CLOCK_HIGH + 0-bit */
MIPS32_LUI(0, 10, UPPER16((clock_high + 0))),
MIPS32_ORI(0, 10, 10, LOWER16((clock_high + 0))),
/* t3 = CLOCK_HIGH + 1-bit */
MIPS32_LUI(0, 11, UPPER16((clock_high + 1))),
MIPS32_ORI(0, 11, 11, LOWER16((clock_high + 1))),
};
ath79_pracc_addn(ctx, preamble2, ARRAY_SIZE(preamble2));
for (int i = 0; i < len; i++) {
uint8_t x = data[i];
/* Generate bitbang code for one byte, highest bit first .*/
for (int j = BITS_PER_BYTE - 1; j >= 0; j--) {
int bit = ((x >> j) & 1);
if (bit) {
/* [$1 + WRITE] = t1 */
pracc_add(ctx, 0,
MIPS32_SW(0, 9, ATH79_REG_WRITE, 1));
/* [$1 + WRITE] = t3 */
pracc_add(ctx, 0,
MIPS32_SW(0, 11, ATH79_REG_WRITE, 1));
} else {
/* [$1 + WRITE] = t0 */
pracc_add(ctx, 0,
MIPS32_SW(0, 8, ATH79_REG_WRITE, 1));
/* [$1 + WRITE] = t2 */
pracc_add(ctx, 0,
MIPS32_SW(0, 10, ATH79_REG_WRITE, 1));
}
}
if (i % 4 == 3) {
/* $3 = [$1 + DATA] */
pracc_add(ctx, 0, MIPS32_LW(0, 3, ATH79_REG_DATA, 1));
/* [OUTi] = $3 */
pracc_add(ctx, MIPS32_PRACC_PARAM_OUT + pracc_out,
MIPS32_SW(0, 3, PRACC_OUT_OFFSET +
pracc_out, 15));
pracc_out += 4;
}
}
if (len & 3) { /* not a multiple of 4 bytes */
/* $3 = [$1 + DATA] */
pracc_add(ctx, 0, MIPS32_LW(0, 3, ATH79_REG_DATA, 1));
/* [OUTi] = $3 */
pracc_add(ctx, MIPS32_PRACC_PARAM_OUT + pracc_out,
MIPS32_SW(0, 3, PRACC_OUT_OFFSET + pracc_out, 15));
pracc_out += 4;
}
if (ath79_info->spi.post_deselect && !partial_xfer) {
const uint32_t post_deselect[] = {
/* $2 = SPI_CS_DIS */
MIPS32_LUI(0, 2, UPPER16(cs_high)),
MIPS32_ORI(0, 2, 2, LOWER16(cs_high)),
/* [$1 + WRITE] = $2 */
MIPS32_SW(0, 2, ATH79_REG_WRITE, 1),
/* [$1 + FS] = 0 (disable flash io register access) */
MIPS32_XORI(0, 2, 2, 0),
MIPS32_SW(0, 2, ATH79_REG_FS, 1),
};
ath79_pracc_addn(ctx, post_deselect, ARRAY_SIZE(post_deselect));
}
/* common pracc epilogue */
/* jump to start */
pracc_add(ctx, 0, MIPS32_B(0, NEG16(ctx->code_count + 1)));
/* restore $15 from DeSave */
pracc_add(ctx, 0, MIPS32_MFC0(0, 15, 31, 0));
return pracc_out / 4;
}
/**
* \b mips32_pracc_clean_invalidate_cache
*
* Writeback D$ and Invalidate I$
* so that the instructions written can be visible to CPU
*/
static int mips32_pracc_clean_invalidate_cache(struct mips_ejtag *ejtag_info,
uint32_t start_addr, uint32_t end_addr)
{
static const uint32_t code[] = {
/* start: */
MIPS32_MTC0(15, 31, 0), /* move $15 to COP0 DeSave */
MIPS32_LUI(15, UPPER16(MIPS32_PRACC_STACK)), /* $15 = MIPS32_PRACC_STACK */
MIPS32_ORI(15, 15, LOWER16(MIPS32_PRACC_STACK)),
MIPS32_SW(8, 0, 15), /* sw $8,($15) */
MIPS32_SW(9, 0, 15), /* sw $9,($15) */
MIPS32_SW(10, 0, 15), /* sw $10,($15) */
MIPS32_SW(11, 0, 15), /* sw $11,($15) */
MIPS32_LUI(8, UPPER16(MIPS32_PRACC_PARAM_IN)), /* $8 = MIPS32_PRACC_PARAM_IN */
MIPS32_ORI(8, 8, LOWER16(MIPS32_PRACC_PARAM_IN)),
MIPS32_LW(9, 0, 8), /* Load write start_addr to $9 */
MIPS32_LW(10, 4, 8), /* Load write end_addr to $10 */
MIPS32_LW(11, 8, 8), /* Load write clsiz to $11 */
/* cache_loop: */
MIPS32_SLTU(8, 10, 9), /* sltu $8, $10, $9 : $8 <- $10 < $9 ? */
MIPS32_BGTZ(8, 6), /* bgtz $8, end */
MIPS32_NOP,
MIPS32_CACHE(MIPS32_CACHE_D_HIT_WRITEBACK, 0, 9), /* cache Hit_Writeback_D, 0($9) */
MIPS32_CACHE(MIPS32_CACHE_I_HIT_INVALIDATE, 0, 9), /* cache Hit_Invalidate_I, 0($9) */
MIPS32_ADDU(9, 9, 11), /* $9 += $11 */
MIPS32_B(NEG16(7)), /* b cache_loop */
MIPS32_NOP,
/* end: */
MIPS32_LW(11, 0, 15), /* lw $11,($15) */
MIPS32_LW(10, 0, 15), /* lw $10,($15) */
MIPS32_LW(9, 0, 15), /* lw $9,($15) */
MIPS32_LW(8, 0, 15), /* lw $8,($15) */
MIPS32_B(NEG16(25)), /* b start */
MIPS32_MFC0(15, 31, 0), /* move COP0 DeSave to $15 */
};
/**
* Find cache line size in bytes
*/
uint32_t conf;
uint32_t dl, clsiz;
mips32_cp0_read(ejtag_info, &conf, 16, 1);
dl = (conf & MIPS32_CONFIG1_DL_MASK) >> MIPS32_CONFIG1_DL_SHIFT;
/* dl encoding : dl=1 => 4 bytes, dl=2 => 8 bytes, etc... */
clsiz = 0x2 << dl;
/* TODO remove array */
uint32_t *param_in = malloc(3 * sizeof(uint32_t));
int retval;
param_in[0] = start_addr;
param_in[1] = end_addr;
param_in[2] = clsiz;
retval = mips32_pracc_exec(ejtag_info, ARRAY_SIZE(code), code, 3, param_in, 0, NULL, 1);
free(param_in);
return retval;
}
static int mips32_pracc_read_mem8(struct mips_ejtag *ejtag_info, uint32_t addr, int count, uint8_t *buf)
{
static const uint32_t code[] = {
/* start: */
MIPS32_MTC0(15, 31, 0), /* move $15 to COP0 DeSave */
MIPS32_LUI(15, UPPER16(MIPS32_PRACC_STACK)), /* $15 = MIPS32_PRACC_STACK */
MIPS32_ORI(15, 15, LOWER16(MIPS32_PRACC_STACK)),
MIPS32_SW(8, 0, 15), /* sw $8,($15) */
MIPS32_SW(9, 0, 15), /* sw $9,($15) */
MIPS32_SW(10, 0, 15), /* sw $10,($15) */
MIPS32_SW(11, 0, 15), /* sw $11,($15) */
MIPS32_LUI(8, UPPER16(MIPS32_PRACC_PARAM_IN)), /* $8 = MIPS32_PRACC_PARAM_IN */
MIPS32_ORI(8, 8, LOWER16(MIPS32_PRACC_PARAM_IN)),
MIPS32_LW(9, 0, 8), /* $9 = mem[$8]; read addr */
MIPS32_LW(10, 4, 8), /* $10 = mem[$8 + 4]; read count */
MIPS32_LUI(11, UPPER16(MIPS32_PRACC_PARAM_OUT)), /* $11 = MIPS32_PRACC_PARAM_OUT */
MIPS32_ORI(11, 11, LOWER16(MIPS32_PRACC_PARAM_OUT)),
/* loop: */
MIPS32_BEQ(0, 10, 8), /* beq 0, $10, end */
MIPS32_NOP,
MIPS32_LBU(8, 0, 9), /* lw $8,0($9), Load t4 with the byte @mem[t1] */
MIPS32_SW(8, 0, 11), /* sw $8,0($11) */
MIPS32_ADDI(10, 10, NEG16(1)), /* $10-- */
MIPS32_ADDI(9, 9, 1), /* $9 += 1 */
MIPS32_ADDI(11, 11, 4), /* $11 += 4 */
MIPS32_B(NEG16(8)), /* b loop */
MIPS32_NOP,
/* end: */
MIPS32_LW(11, 0, 15), /* lw $11,($15) */
MIPS32_LW(10, 0, 15), /* lw $10,($15) */
MIPS32_LW(9, 0, 15), /* lw $9,($15) */
MIPS32_LW(8, 0, 15), /* lw $8,($15) */
MIPS32_B(NEG16(27)), /* b start */
MIPS32_MFC0(15, 31, 0), /* move COP0 DeSave to $15 */
};
/* TODO remove array */
uint32_t *param_out = malloc(count * sizeof(uint32_t));
if (param_out == NULL) {
LOG_ERROR("Out of memory");
return ERROR_FAIL;
}
int retval = ERROR_OK;
int blocksize;
uint32_t param_in[2];
int bytesread = 0;
while (count > 0) {
blocksize = count;
if (count > 0x400)
blocksize = 0x400;
param_in[0] = addr;
param_in[1] = blocksize;
retval = mips32_pracc_exec(ejtag_info, ARRAY_SIZE(code), code,
ARRAY_SIZE(param_in), param_in, count, ¶m_out[bytesread], 1);
if (retval != ERROR_OK)
return retval;
count -= blocksize;
addr += blocksize;
bytesread += blocksize;
}
int i;
for (i = 0; i < bytesread; i++)
buf[i] = param_out[i];
free(param_out);
return retval;
}
static int mips32_pracc_read_mem32(struct mips_ejtag *ejtag_info, uint32_t addr, int count, uint32_t *buf)
{
static const uint32_t code[] = {
/* start: */
MIPS32_MTC0(15, 31, 0), /* move $15 to COP0 DeSave */
MIPS32_LUI(15, UPPER16(MIPS32_PRACC_STACK)), /* $15 = MIPS32_PRACC_STACK */
MIPS32_ORI(15, 15, LOWER16(MIPS32_PRACC_STACK)),
MIPS32_SW(8, 0, 15), /* sw $8,($15) */
MIPS32_SW(9, 0, 15), /* sw $9,($15) */
MIPS32_SW(10, 0, 15), /* sw $10,($15) */
MIPS32_SW(11, 0, 15), /* sw $11,($15) */
MIPS32_LUI(8, UPPER16(MIPS32_PRACC_PARAM_IN)), /* $8 = MIPS32_PRACC_PARAM_IN */
MIPS32_ORI(8, 8, LOWER16(MIPS32_PRACC_PARAM_IN)),
MIPS32_LW(9, 0, 8), /* $9 = mem[$8]; read addr */
MIPS32_LW(10, 4, 8), /* $10 = mem[$8 + 4]; read count */
MIPS32_LUI(11, UPPER16(MIPS32_PRACC_PARAM_OUT)), /* $11 = MIPS32_PRACC_PARAM_OUT */
MIPS32_ORI(11, 11, LOWER16(MIPS32_PRACC_PARAM_OUT)),
/* loop: */
MIPS32_BEQ(0, 10, 8), /* beq 0, $10, end */
MIPS32_NOP,
MIPS32_LW(8, 0, 9), /* lw $8,0($9), Load $8 with the word @mem[$9] */
MIPS32_SW(8, 0, 11), /* sw $8,0($11) */
MIPS32_ADDI(10, 10, NEG16(1)), /* $10-- */
MIPS32_ADDI(9, 9, 4), /* $1 += 4 */
MIPS32_ADDI(11, 11, 4), /* $11 += 4 */
MIPS32_B(NEG16(8)), /* b loop */
MIPS32_NOP,
/* end: */
MIPS32_LW(11, 0, 15), /* lw $11,($15) */
MIPS32_LW(10, 0, 15), /* lw $10,($15) */
MIPS32_LW(9, 0, 15), /* lw $9,($15) */
MIPS32_LW(8, 0, 15), /* lw $8,($15) */
MIPS32_B(NEG16(27)), /* b start */
MIPS32_MFC0(15, 31, 0), /* move COP0 DeSave to $15 */
};
int retval = ERROR_OK;
int blocksize;
int wordsread;
uint32_t param_in[2];
wordsread = 0;
while (count > 0) {
blocksize = count;
if (count > 0x400)
blocksize = 0x400;
param_in[0] = addr;
param_in[1] = blocksize;
retval = mips32_pracc_exec(ejtag_info, ARRAY_SIZE(code), code,
ARRAY_SIZE(param_in), param_in, blocksize, &buf[wordsread], 1);
if (retval != ERROR_OK)
return retval;
count -= blocksize;
addr += blocksize*sizeof(uint32_t);
wordsread += blocksize;
}
return retval;
}
/* fastdata upload/download requires an initialized working area
* to load the download code; it should not be called otherwise
* fetch order from the fastdata area
* 1. start addr
* 2. end addr
* 3. data ...
*/
int mips32_pracc_fastdata_xfer(struct mips_ejtag *ejtag_info, struct working_area *source,
int write, uint32_t addr, int count, uint32_t *buf)
{
uint32_t handler_code[] = {
/* caution when editing, table is modified below */
/* r15 points to the start of this code */
MIPS32_SW(8,MIPS32_FASTDATA_HANDLER_SIZE - 4,15),
MIPS32_SW(9,MIPS32_FASTDATA_HANDLER_SIZE - 8,15),
MIPS32_SW(10,MIPS32_FASTDATA_HANDLER_SIZE - 12,15),
MIPS32_SW(11,MIPS32_FASTDATA_HANDLER_SIZE - 16,15),
/* start of fastdata area in t0 */
MIPS32_LUI(8,UPPER16(MIPS32_PRACC_FASTDATA_AREA)),
MIPS32_ORI(8,8,LOWER16(MIPS32_PRACC_FASTDATA_AREA)),
MIPS32_LW(9,0,8), /* start addr in t1 */
MIPS32_LW(10,0,8), /* end addr to t2 */
/* loop: */
/* 8 */ MIPS32_LW(11,0,0), /* lw t3,[t8 | r9] */
/* 9 */ MIPS32_SW(11,0,0), /* sw t3,[r9 | r8] */
MIPS32_BNE(10,9,NEG16(3)), /* bne $t2,t1,loop */
MIPS32_ADDI(9,9,4), /* addi t1,t1,4 */
MIPS32_LW(8,MIPS32_FASTDATA_HANDLER_SIZE - 4,15),
MIPS32_LW(9,MIPS32_FASTDATA_HANDLER_SIZE - 8,15),
MIPS32_LW(10,MIPS32_FASTDATA_HANDLER_SIZE - 12,15),
MIPS32_LW(11,MIPS32_FASTDATA_HANDLER_SIZE - 16,15),
MIPS32_LUI(15,UPPER16(MIPS32_PRACC_TEXT)),
MIPS32_ORI(15,15,LOWER16(MIPS32_PRACC_TEXT)),
MIPS32_JR(15), /* jr start */
MIPS32_MFC0(15,31,0), /* move COP0 DeSave to $15 */
};
uint32_t jmp_code[] = {
MIPS32_MTC0(15,31,0), /* move $15 to COP0 DeSave */
/* 1 */ MIPS32_LUI(15,0), /* addr of working area added below */
/* 2 */ MIPS32_ORI(15,15,0), /* addr of working area added below */
MIPS32_JR(15), /* jump to ram program */
MIPS32_NOP,
};
int retval, i;
uint32_t val, ejtag_ctrl, address;
if (source->size < MIPS32_FASTDATA_HANDLER_SIZE)
return ERROR_TARGET_RESOURCE_NOT_AVAILABLE;
if (write)
{
handler_code[8] = MIPS32_LW(11,0,8); /* load data from probe at fastdata area */
handler_code[9] = MIPS32_SW(11,0,9); /* store data to RAM @ r9 */
}
else
{
handler_code[8] = MIPS32_LW(11,0,9); /* load data from RAM @ r9 */
handler_code[9] = MIPS32_SW(11,0,8); /* store data to probe at fastdata area */
}
/* write program into RAM */
mips32_pracc_write_mem32(ejtag_info, source->address, ARRAY_SIZE(handler_code), handler_code);
LOG_DEBUG("%s using 0x%.8" PRIx32 " for write handler\n", __func__, source->address);
jmp_code[1] |= UPPER16(source->address);
jmp_code[2] |= LOWER16(source->address);
for (i = 0; i < (int) ARRAY_SIZE(jmp_code); i++)
{
if ((retval = wait_for_pracc_rw(ejtag_info, &ejtag_ctrl)) != ERROR_OK)
return retval;
mips_ejtag_set_instr(ejtag_info, EJTAG_INST_DATA, NULL);
mips_ejtag_drscan_32(ejtag_info, &jmp_code[i]);
/* Clear the access pending bit (let the processor eat!) */
ejtag_ctrl = ejtag_info->ejtag_ctrl & ~EJTAG_CTRL_PRACC;
mips_ejtag_set_instr(ejtag_info, EJTAG_INST_CONTROL, NULL);
mips_ejtag_drscan_32(ejtag_info, &ejtag_ctrl);
}
if ((retval = wait_for_pracc_rw(ejtag_info, &ejtag_ctrl)) != ERROR_OK)
return retval;
/* next fetch to dmseg should be in FASTDATA_AREA, check */
address = 0;
mips_ejtag_set_instr(ejtag_info, EJTAG_INST_ADDRESS, NULL);
mips_ejtag_drscan_32(ejtag_info, &address);
if (address != MIPS32_PRACC_FASTDATA_AREA)
return ERROR_FAIL;
/* Send the load start address */
val = addr;
mips_ejtag_set_instr(ejtag_info, EJTAG_INST_FASTDATA, NULL);
mips_ejtag_fastdata_scan(ejtag_info, 1, &val);
/* Send the load end address */
val = addr + (count - 1) * 4;
mips_ejtag_set_instr(ejtag_info, EJTAG_INST_FASTDATA, NULL);
mips_ejtag_fastdata_scan(ejtag_info, 1, &val);
for (i = 0; i < count; i++)
{
/* Send the data out using fastdata (clears the access pending bit) */
if ((retval = mips_ejtag_fastdata_scan(ejtag_info, write, buf++)) != ERROR_OK)
return retval;
}
if ((retval = jtag_execute_queue()) != ERROR_OK)
{
LOG_ERROR("fastdata load failed");
return retval;
}
if ((retval = wait_for_pracc_rw(ejtag_info, &ejtag_ctrl)) != ERROR_OK)
return retval;
address = 0;
mips_ejtag_set_instr(ejtag_info, EJTAG_INST_ADDRESS, NULL);
mips_ejtag_drscan_32(ejtag_info, &address);
if (address != MIPS32_PRACC_TEXT)
LOG_ERROR("mini program did not return to start\n");
return retval;
}
int mips32_pracc_read_regs(struct mips_ejtag *ejtag_info, uint32_t *regs)
{
static const uint32_t code[] = {
/* start: */
MIPS32_MTC0(2,31,0), /* move $2 to COP0 DeSave */
MIPS32_LUI(2,UPPER16(MIPS32_PRACC_PARAM_OUT)), /* $2 = MIPS32_PRACC_PARAM_OUT */
MIPS32_ORI(2,2,LOWER16(MIPS32_PRACC_PARAM_OUT)),
MIPS32_SW(0,0*4,2), /* sw $0,0*4($2) */
MIPS32_SW(1,1*4,2), /* sw $1,1*4($2) */
MIPS32_SW(15,15*4,2), /* sw $15,15*4($2) */
MIPS32_MFC0(2,31,0), /* move COP0 DeSave to $2 */
MIPS32_MTC0(15,31,0), /* move $15 to COP0 DeSave */
MIPS32_LUI(15,UPPER16(MIPS32_PRACC_STACK)), /* $15 = MIPS32_PRACC_STACK */
MIPS32_ORI(15,15,LOWER16(MIPS32_PRACC_STACK)),
MIPS32_SW(1,0,15), /* sw $1,($15) */
MIPS32_SW(2,0,15), /* sw $2,($15) */
MIPS32_LUI(1,UPPER16(MIPS32_PRACC_PARAM_OUT)), /* $1 = MIPS32_PRACC_PARAM_OUT */
MIPS32_ORI(1,1,LOWER16(MIPS32_PRACC_PARAM_OUT)),
MIPS32_SW(2,2*4,1), /* sw $2,2*4($1) */
MIPS32_SW(3,3*4,1), /* sw $3,3*4($1) */
MIPS32_SW(4,4*4,1), /* sw $4,4*4($1) */
MIPS32_SW(5,5*4,1), /* sw $5,5*4($1) */
MIPS32_SW(6,6*4,1), /* sw $6,6*4($1) */
MIPS32_SW(7,7*4,1), /* sw $7,7*4($1) */
MIPS32_SW(8,8*4,1), /* sw $8,8*4($1) */
MIPS32_SW(9,9*4,1), /* sw $9,9*4($1) */
MIPS32_SW(10,10*4,1), /* sw $10,10*4($1) */
MIPS32_SW(11,11*4,1), /* sw $11,11*4($1) */
MIPS32_SW(12,12*4,1), /* sw $12,12*4($1) */
MIPS32_SW(13,13*4,1), /* sw $13,13*4($1) */
MIPS32_SW(14,14*4,1), /* sw $14,14*4($1) */
MIPS32_SW(16,16*4,1), /* sw $16,16*4($1) */
MIPS32_SW(17,17*4,1), /* sw $17,17*4($1) */
MIPS32_SW(18,18*4,1), /* sw $18,18*4($1) */
MIPS32_SW(19,19*4,1), /* sw $19,19*4($1) */
MIPS32_SW(20,20*4,1), /* sw $20,20*4($1) */
MIPS32_SW(21,21*4,1), /* sw $21,21*4($1) */
MIPS32_SW(22,22*4,1), /* sw $22,22*4($1) */
MIPS32_SW(23,23*4,1), /* sw $23,23*4($1) */
MIPS32_SW(24,24*4,1), /* sw $24,24*4($1) */
MIPS32_SW(25,25*4,1), /* sw $25,25*4($1) */
MIPS32_SW(26,26*4,1), /* sw $26,26*4($1) */
MIPS32_SW(27,27*4,1), /* sw $27,27*4($1) */
MIPS32_SW(28,28*4,1), /* sw $28,28*4($1) */
MIPS32_SW(29,29*4,1), /* sw $29,29*4($1) */
MIPS32_SW(30,30*4,1), /* sw $30,30*4($1) */
MIPS32_SW(31,31*4,1), /* sw $31,31*4($1) */
MIPS32_MFC0(2,12,0), /* move status to $2 */
MIPS32_SW(2,32*4,1), /* sw $2,32*4($1) */
MIPS32_MFLO(2), /* move lo to $2 */
MIPS32_SW(2,33*4,1), /* sw $2,33*4($1) */
MIPS32_MFHI(2), /* move hi to $2 */
MIPS32_SW(2,34*4,1), /* sw $2,34*4($1) */
MIPS32_MFC0(2,8,0), /* move badvaddr to $2 */
MIPS32_SW(2,35*4,1), /* sw $2,35*4($1) */
MIPS32_MFC0(2,13,0), /* move cause to $2 */
MIPS32_SW(2,36*4,1), /* sw $2,36*4($1) */
MIPS32_MFC0(2,24,0), /* move depc (pc) to $2 */
MIPS32_SW(2,37*4,1), /* sw $2,37*4($1) */
MIPS32_LW(2,0,15), /* lw $2,($15) */
MIPS32_LW(1,0,15), /* lw $1,($15) */
MIPS32_B(NEG16(58)), /* b start */
MIPS32_MFC0(15,31,0), /* move COP0 DeSave to $15 */
};
int retval;
retval = mips32_pracc_exec(ejtag_info, ARRAY_SIZE(code), code, \
0, NULL, MIPS32NUMCOREREGS, regs, 1);
return retval;
}
int mips32_pracc_read_mem16(struct mips_ejtag *ejtag_info, uint32_t addr, int count, uint16_t *buf)
{
static const uint32_t code[] = {
/* start: */
MIPS32_MTC0(15,31,0), /* move $15 to COP0 DeSave */
MIPS32_LUI(15,UPPER16(MIPS32_PRACC_STACK)), /* $15 = MIPS32_PRACC_STACK */
MIPS32_ORI(15,15,LOWER16(MIPS32_PRACC_STACK)),
MIPS32_SW(8,0,15), /* sw $8,($15) */
MIPS32_SW(9,0,15), /* sw $9,($15) */
MIPS32_SW(10,0,15), /* sw $10,($15) */
MIPS32_SW(11,0,15), /* sw $11,($15) */
MIPS32_LUI(8,UPPER16(MIPS32_PRACC_PARAM_IN)), /* $8 = MIPS32_PRACC_PARAM_IN */
MIPS32_ORI(8,8,LOWER16(MIPS32_PRACC_PARAM_IN)),
MIPS32_LW(9,0,8), /* $9 = mem[$8]; read addr */
MIPS32_LW(10,4,8), /* $10 = mem[$8 + 4]; read count */
MIPS32_LUI(11,UPPER16(MIPS32_PRACC_PARAM_OUT)), /* $11 = MIPS32_PRACC_PARAM_OUT */
MIPS32_ORI(11,11,LOWER16(MIPS32_PRACC_PARAM_OUT)),
/* loop: */
MIPS32_BEQ(0,10,8), /* beq 0, $10, end */
MIPS32_NOP,
MIPS32_LHU(8,0,9), /* lw $8,0($9), Load $8 with the halfword @mem[$9] */
MIPS32_SW(8,0,11), /* sw $8,0($11) */
MIPS32_ADDI(10,10,NEG16(1)), /* $10-- */
MIPS32_ADDI(9,9,2), /* $9 += 2 */
MIPS32_ADDI(11,11,4), /* $11 += 4 */
MIPS32_B(NEG16(8)), /* b loop */
MIPS32_NOP,
/* end: */
MIPS32_LW(11,0,15), /* lw $11,($15) */
MIPS32_LW(10,0,15), /* lw $10,($15) */
MIPS32_LW(9,0,15), /* lw $9,($15) */
MIPS32_LW(8,0,15), /* lw $8,($15) */
MIPS32_B(NEG16(27)), /* b start */
MIPS32_MFC0(15,30,0), /* move COP0 DeSave to $15 */
};
/* TODO remove array */
uint32_t *param_out = malloc(count * sizeof(uint32_t));
int i;
// int retval;
int blocksize;
int bytesread;
uint32_t param_in[2];
bytesread = 0;
//while (count > 0)
{
blocksize = count;
if (count > 0x400)
blocksize = 0x400;
param_in[0] = addr;
param_in[1] = blocksize;
mips32_pracc_exec(ejtag_info, ARRAY_SIZE(code), code, \
ARRAY_SIZE(param_in), param_in, count, param_out, 1);
// count -= blocksize;
// addr += blocksize;
// bytesread += blocksize;
}
for (i = 0; i < count; i++)
{
buf[i] = param_out[i];
}
free(param_out);
return ERROR_OK;
}