static bool
LoadPath(const ProfileMap &map, DeviceConfig &config, unsigned n)
{
char buffer[64];
MakeDeviceSettingName(buffer, "Port", n, "Path");
return map.Get(buffer, config.path);
}
static bool
LoadPath(DeviceConfig &config, unsigned n)
{
TCHAR buffer[64];
MakeDeviceSettingName(buffer, _T("Port"), n, _T("Path"));
return Profile::Get(buffer, config.path);
}
void
Profile::SetDeviceConfig(unsigned n, const DeviceConfig &config)
{
TCHAR buffer[64];
WritePortType(n, config.port_type);
MakeDeviceSettingName(buffer, CONF("Port"), n, _T("Index"));
Set(buffer, config.port_index);
MakeDeviceSettingName(buffer, CONF("Speed"), n, _T("Index"));
Set(buffer, config.speed_index);
_tcscpy(buffer, CONF("DeviceA"));
buffer[_tcslen(buffer) - 1] += n;
Set(buffer, config.driver_name);
}
static bool
ReadPortType(const ProfileMap &map, unsigned n, DeviceConfig::PortType &type)
{
char name[64];
MakeDeviceSettingName(name, "Port", n, "Type");
const char *value = map.Get(name);
return value != NULL && StringToPortType(value, type);
}
static enum DeviceConfig::port_type
ReadPortType(unsigned n)
{
TCHAR name[64], value[64];
MakeDeviceSettingName(name, CONF("Port"), n, _T("Type"));
if (!Profile::Get(name, value, sizeof(value) / sizeof(value[0])))
return DeviceConfig::SERIAL;
return StringToPortType(value);
}
static void
WritePortType(ProfileMap &map, unsigned n, DeviceConfig::PortType type)
{
const char *value = PortTypeToString(type);
if (value == NULL)
return;
char name[64];
MakeDeviceSettingName(name, "Port", n, "Type");
map.Set(name, value);
}
static bool
WritePortType(unsigned n, enum DeviceConfig::port_type type)
{
const TCHAR *value = PortTypeToString(type);
if (value == NULL)
return false;
TCHAR name[64];
MakeDeviceSettingName(name, CONF("Port"), n, _T("Type"));
return Profile::Set(name, value);
}
void
Profile::SetDeviceConfig(unsigned n, const DeviceConfig &config)
{
TCHAR buffer[64];
WritePortType(n, config.port_type);
MakeDeviceSettingName(buffer, _T("Port"), n, _T("BluetoothMAC"));
Set(buffer, config.bluetooth_mac);
MakeDeviceSettingName(buffer, _T("Port"), n, _T("IOIOUartID"));
Set(buffer, config.ioio_uart_id);
MakeDeviceSettingName(buffer, _T("Port"), n, _T("Path"));
Set(buffer, config.path);
MakeDeviceSettingName(buffer, _T("Port"), n, _T("BaudRate"));
Set(buffer, config.baud_rate);
MakeDeviceSettingName(buffer, _T("Port"), n, _T("BulkBaudRate"));
Set(buffer, config.bulk_baud_rate);
MakeDeviceSettingName(buffer, _T("Port"), n, _T("TCPPort"));
Set(buffer, config.tcp_port);
_tcscpy(buffer, _T("DeviceA"));
buffer[_tcslen(buffer) - 1] += n;
Set(buffer, config.driver_name);
}
void
Profile::GetDeviceConfig(unsigned n, DeviceConfig &config)
{
TCHAR buffer[64];
unsigned Temp = 0;
config.port_type = ReadPortType(n);
MakeDeviceSettingName(buffer, CONF("Port"), n, _T("Index"));
if (Get(buffer, Temp))
config.port_index = Temp;
else if (is_altair() && n == 0)
config.port_index = 2;
else if (is_altair() && n == 2)
config.port_index = 1;
else
config.port_index = 0;
MakeDeviceSettingName(buffer, CONF("Speed"), n, _T("Index"));
if (Get(buffer, Temp))
config.speed_index = Temp;
else if (is_altair())
config.speed_index = 5;
else
config.speed_index = 2;
_tcscpy(buffer, CONF("DeviceA"));
buffer[_tcslen(buffer) - 1] += n;
if (!Get(buffer, config.driver_name,
sizeof(config.driver_name) / sizeof(config.driver_name[0]))) {
if (is_altair() && n == 0)
_tcscpy(config.driver_name, _T("Altair RU"));
else if (is_altair() && n == 1)
_tcscpy(config.driver_name, _T("Vega"));
else if (is_altair() && n == 2)
_tcscpy(config.driver_name, _T("NmeaOut"));
else
config.driver_name[0] = '\0';
}
}
void
Profile::GetDeviceConfig(unsigned n, DeviceConfig &config)
{
TCHAR buffer[64];
unsigned Temp = 0;
config.port_type = ReadPortType(n);
MakeDeviceSettingName(buffer, CONF("Port"), n, _T("Index"));
if (Get(buffer, Temp))
config.port_index = Temp;
MakeDeviceSettingName(buffer, CONF("Speed"), n, _T("Index"));
if (Get(buffer, Temp))
config.speed_index = Temp;
config.driver_name[0] = '\0';
_tcscpy(buffer, CONF("DeviceA"));
buffer[_tcslen(buffer) - 1] += n;
Get(buffer, config.driver_name,
sizeof(config.driver_name) / sizeof(config.driver_name[0]));
}
static DeviceConfig::PortType
ReadPortType(unsigned n)
{
TCHAR name[64], value[64];
MakeDeviceSettingName(name, _T("Port"), n, _T("Type"));
if (!Profile::Get(name, value, ARRAY_SIZE(value)))
return n == 0
? (IsAndroid()
? DeviceConfig::PortType::INTERNAL
: DeviceConfig::PortType::SERIAL)
: DeviceConfig::PortType::DISABLED;
return StringToPortType(value);
}
static bool
LoadPortIndex(DeviceConfig &config, unsigned n)
{
TCHAR buffer[64];
MakeDeviceSettingName(buffer, _T("Port"), n, _T("Index"));
unsigned index;
if (!Profile::Get(buffer, index))
return false;
/* adjust the number, compatibility quirk for XCSoar 5 */
if (index < 10)
++index;
else if (index == 10)
index = 0;
_stprintf(buffer, _T("COM%u:"), index);
config.path = buffer;
return true;
}
static bool
LoadPortIndex(const ProfileMap &map, DeviceConfig &config, unsigned n)
{
char buffer[64];
MakeDeviceSettingName(buffer, "Port", n, "Index");
unsigned index;
if (!map.Get(buffer, index))
return false;
/* adjust the number, compatibility quirk for XCSoar 5 */
if (index < 10)
++index;
else if (index == 10)
index = 0;
TCHAR path[64];
_stprintf(path, _T("COM%u:"), index);
config.path = path;
return true;
}
void
Profile::SetDeviceConfig(ProfileMap &map,
unsigned n, const DeviceConfig &config)
{
char buffer[64];
WritePortType(map, n, config.port_type);
MakeDeviceSettingName(buffer, "Port", n, "BluetoothMAC");
map.Set(buffer, config.bluetooth_mac);
MakeDeviceSettingName(buffer, "Port", n, "IOIOUartID");
map.Set(buffer, config.ioio_uart_id);
MakeDeviceSettingName(buffer, "Port", n, "Path");
map.Set(buffer, config.path);
MakeDeviceSettingName(buffer, "Port", n, "BaudRate");
map.Set(buffer, config.baud_rate);
MakeDeviceSettingName(buffer, "Port", n, "BulkBaudRate");
map.Set(buffer, config.bulk_baud_rate);
MakeDeviceSettingName(buffer, "Port", n, "IPAddress");
map.Set(buffer, config.ip_address);
MakeDeviceSettingName(buffer, "Port", n, "TCPPort");
map.Set(buffer, config.tcp_port);
strcpy(buffer, "DeviceA");
buffer[strlen(buffer) - 1] += n;
map.Set(buffer, config.driver_name);
MakeDeviceSettingName(buffer, "Port", n, "Enabled");
map.Set(buffer, config.enabled);
MakeDeviceSettingName(buffer, "Port", n, "SyncFromDevice");
map.Set(buffer, config.sync_from_device);
MakeDeviceSettingName(buffer, "Port", n, "SyncToDevice");
map.Set(buffer, config.sync_to_device);
MakeDeviceSettingName(buffer, "Port", n, "K6Bt");
map.Set(buffer, config.k6bt);
MakeDeviceSettingName(buffer, "Port", n, "I2C_Bus");
map.Set(buffer, config.i2c_bus);
MakeDeviceSettingName(buffer, "Port", n, "I2C_Addr");
map.Set(buffer, config.i2c_addr);
MakeDeviceSettingName(buffer, "Port", n, "PressureUse");
map.SetEnum(buffer, config.press_use);
MakeDeviceSettingName(buffer, "Port", n, "SensorOffset");
auto offset = DeviceConfig::UsesCalibration(config.port_type) ? config.sensor_offset : fixed(0);
// Has new calibration data been delivered ?
if (CommonInterface::Basic().sensor_calibration_available)
offset = CommonInterface::Basic().sensor_calibration_offset;
map.Set(buffer, offset);
MakeDeviceSettingName(buffer, "Port", n, "SensorFactor");
auto factor = DeviceConfig::UsesCalibration(config.port_type) ? config.sensor_factor : fixed(0);
// Has new calibration data been delivered ?
if (CommonInterface::Basic().sensor_calibration_available)
factor = CommonInterface::Basic().sensor_calibration_factor;
map.Set(buffer, factor);
MakeDeviceSettingName(buffer, "Port", n, "UseSecondDevice");
map.Set(buffer, config.use_second_device);
MakeDeviceSettingName(buffer, "Port", n, "SecondDevice");
map.Set(buffer, config.driver2_name);
}
void
Profile::GetDeviceConfig(const ProfileMap &map, unsigned n,
DeviceConfig &config)
{
char buffer[64];
bool have_port_type = ReadPortType(map, n, config.port_type);
MakeDeviceSettingName(buffer, "Port", n, "BluetoothMAC");
map.Get(buffer, config.bluetooth_mac);
MakeDeviceSettingName(buffer, "Port", n, "IOIOUartID");
map.Get(buffer, config.ioio_uart_id);
MakeDeviceSettingName(buffer, "Port", n, "IPAddress");
if (!map.Get(buffer, config.ip_address))
config.ip_address.clear();
MakeDeviceSettingName(buffer, "Port", n, "TCPPort");
if (!map.Get(buffer, config.tcp_port))
config.tcp_port = 4353;
config.path.clear();
if ((!have_port_type ||
config.port_type == DeviceConfig::PortType::SERIAL) &&
!LoadPath(map, config, n) && LoadPortIndex(map, config, n))
config.port_type = DeviceConfig::PortType::SERIAL;
MakeDeviceSettingName(buffer, "Port", n, "BaudRate");
if (!map.Get(buffer, config.baud_rate)) {
/* XCSoar before 6.2 used to store a "speed index", not the real
baud rate - try to import the old settings */
static constexpr unsigned speed_index_table[] = {
1200,
2400,
4800,
9600,
19200,
38400,
57600,
115200
};
MakeDeviceSettingName(buffer, "Speed", n, "Index");
unsigned speed_index;
if (map.Get(buffer, speed_index) &&
speed_index < ARRAY_SIZE(speed_index_table))
config.baud_rate = speed_index_table[speed_index];
}
MakeDeviceSettingName(buffer, "Port", n, "BulkBaudRate");
if (!map.Get(buffer, config.bulk_baud_rate))
config.bulk_baud_rate = 0;
strcpy(buffer, "DeviceA");
buffer[strlen(buffer) - 1] += n;
map.Get(buffer, config.driver_name);
MakeDeviceSettingName(buffer, "Port", n, "Enabled");
map.Get(buffer, config.enabled);
MakeDeviceSettingName(buffer, "Port", n, "SyncFromDevice");
map.Get(buffer, config.sync_from_device);
MakeDeviceSettingName(buffer, "Port", n, "SyncToDevice");
map.Get(buffer, config.sync_to_device);
MakeDeviceSettingName(buffer, "Port", n, "K6Bt");
map.Get(buffer, config.k6bt);
MakeDeviceSettingName(buffer, "Port", n, "I2C_Bus");
map.Get(buffer, config.i2c_bus);
MakeDeviceSettingName(buffer, "Port", n, "I2C_Addr");
map.Get(buffer, config.i2c_addr);
MakeDeviceSettingName(buffer, "Port", n, "PressureUse");
map.GetEnum(buffer, config.press_use);
MakeDeviceSettingName(buffer, "Port", n, "SensorOffset");
map.Get(buffer, config.sensor_offset);
MakeDeviceSettingName(buffer, "Port", n, "SensorFactor");
map.Get(buffer, config.sensor_factor);
MakeDeviceSettingName(buffer, "Port", n, "UseSecondDevice");
map.Get(buffer, config.use_second_device);
MakeDeviceSettingName(buffer, "Port", n, "SecondDevice");
map.Get(buffer, config.driver2_name);
}
void
Profile::GetDeviceConfig(unsigned n, DeviceConfig &config)
{
TCHAR buffer[64];
config.port_type = ReadPortType(n);
MakeDeviceSettingName(buffer, _T("Port"), n, _T("BluetoothMAC"));
Get(buffer, config.bluetooth_mac);
MakeDeviceSettingName(buffer, _T("Port"), n, _T("IOIOUartID"));
Get(buffer, config.ioio_uart_id);
MakeDeviceSettingName(buffer, _T("Port"), n, _T("TCPPort"));
if (!Get(buffer, config.tcp_port))
config.tcp_port = 4353;
config.path.clear();
if (config.port_type == DeviceConfig::PortType::SERIAL &&
!LoadPath(config, n) && !LoadPortIndex(config, n)) {
if (IsAltair() && n == 0)
config.path = _T("COM3:");
else if (IsAltair() && n == 2)
config.path = _T("COM2:");
}
MakeDeviceSettingName(buffer, _T("Port"), n, _T("BaudRate"));
if (!Get(buffer, config.baud_rate)) {
/* XCSoar before 6.2 used to store a "speed index", not the real
baud rate - try to import the old settings */
static gcc_constexpr_data unsigned speed_index_table[] = {
1200,
2400,
4800,
9600,
19200,
38400,
57600,
115200
};
MakeDeviceSettingName(buffer, _T("Speed"), n, _T("Index"));
unsigned speed_index;
if (Get(buffer, speed_index) &&
speed_index < ARRAY_SIZE(speed_index_table))
config.baud_rate = speed_index_table[speed_index];
else if (IsAltair())
config.baud_rate = 38400;
else
config.baud_rate = 4800;
}
MakeDeviceSettingName(buffer, _T("Port"), n, _T("BulkBaudRate"));
if (!Get(buffer, config.bulk_baud_rate))
config.bulk_baud_rate = 0;
_tcscpy(buffer, _T("DeviceA"));
buffer[_tcslen(buffer) - 1] += n;
if (!Get(buffer, config.driver_name)) {
if (IsAltair() && n == 0)
config.driver_name = _T("Altair RU");
else if (IsAltair() && n == 1)
config.driver_name = _T("Vega");
else if (IsAltair() && n == 2)
config.driver_name = _T("NmeaOut");
else
config.driver_name.clear();
}
}
