/******************************************************************************
* This function takes a graph and its partition vector and creates a new
* graph corresponding to the one after the movement
*******************************************************************************/
void TestMoveGraph(graph_t *ograph, graph_t *omgraph, idx_t *part, MPI_Comm comm)
{
idx_t npes, mype;
ctrl_t *ctrl;
graph_t *graph, *mgraph;
idx_t options[5] = {0, 0, 1, 0, 0};
gkMPI_Comm_size(comm, &npes);
ctrl = SetupCtrl(PARMETIS_OP_KMETIS, NULL, 1, npes, NULL, NULL, comm);
mype = ctrl->mype;
ctrl->CoarsenTo = 1; /* Needed by SetUpGraph, otherwise we can FP errors */
graph = TestSetUpGraph(ctrl, ograph->vtxdist, ograph->xadj, NULL, ograph->adjncy, NULL, 0);
AllocateWSpace(ctrl, 0);
CommSetup(ctrl, graph);
graph->where = part;
graph->ncon = 1;
mgraph = MoveGraph(ctrl, graph);
omgraph->gnvtxs = mgraph->gnvtxs;
omgraph->nvtxs = mgraph->nvtxs;
omgraph->nedges = mgraph->nedges;
omgraph->vtxdist = mgraph->vtxdist;
omgraph->xadj = mgraph->xadj;
omgraph->adjncy = mgraph->adjncy;
mgraph->vtxdist = NULL;
mgraph->xadj = NULL;
mgraph->adjncy = NULL;
FreeGraph(mgraph);
graph->where = NULL;
FreeInitialGraphAndRemap(graph);
FreeCtrl(&ctrl);
}
void CToolRegularRuler::MoveGraph(CPoint point)
{
PointF pt((float)point.x,(float)point.y);
float offsetx = pt.X - m_ptModifyOrg.X;
float offsety = pt.Y - m_ptModifyOrg.Y;
m_ptModifyOrg.X = pt.X;
m_ptModifyOrg.Y = pt.Y;
MoveGraph(offsetx, offsety);
}
void CAngleLabel::ModifyGraph(UINT nMouseState, CPoint point)
{
if(MS_LBTNMOUSE != nMouseState)
{
return;
}
if(MT_MOVE == m_ModifyType)
{
MoveGraph(point);
}
else if(MT_NONE != m_ModifyType)
{
StretchGraph(point);
}
}
/***********************************************************************************
* This function is the entry point of the parallel kmetis algorithm that uses
* coordinates to compute an initial graph distribution.
************************************************************************************/
int ParMETIS_V3_PartGeomKway(idx_t *vtxdist, idx_t *xadj, idx_t *adjncy,
idx_t *vwgt, idx_t *adjwgt, idx_t *wgtflag, idx_t *numflag, idx_t *ndims,
real_t *xyz, idx_t *ncon, idx_t *nparts, real_t *tpwgts, real_t *ubvec,
idx_t *options, idx_t *edgecut, idx_t *part, MPI_Comm *comm)
{
idx_t h, i, j, npes, mype, status, nvtxs, seed, dbglvl;
idx_t cut, gcut, maxnvtxs;
idx_t moptions[METIS_NOPTIONS];
ctrl_t *ctrl;
graph_t *graph, *mgraph;
real_t balance;
size_t curmem;
/* Check the input parameters and return if an error */
status = CheckInputsPartGeomKway(vtxdist, xadj, adjncy, vwgt, adjwgt, wgtflag,
numflag, ndims, xyz, ncon, nparts, tpwgts, ubvec, options,
edgecut, part, comm);
if (GlobalSEMinComm(*comm, status) == 0)
return METIS_ERROR;
status = METIS_OK;
gk_malloc_init();
curmem = gk_GetCurMemoryUsed();
/* Setup the ctrl */
ctrl = SetupCtrl(PARMETIS_OP_GKMETIS, options, *ncon, *nparts, tpwgts, ubvec, *comm);
npes = ctrl->npes;
mype = ctrl->mype;
/* Take care the nparts == 1 case */
if (*nparts == 1) {
iset(vtxdist[mype+1]-vtxdist[mype], (*numflag == 0 ? 0 : 1), part);
*edgecut = 0;
goto DONE;
}
/* Take care of npes == 1 case */
if (npes == 1) {
nvtxs = vtxdist[1] - vtxdist[0]; /* subtraction is required when numflag==1 */
METIS_SetDefaultOptions(moptions);
moptions[METIS_OPTION_NUMBERING] = *numflag;
status = METIS_PartGraphKway(&nvtxs, ncon, xadj, adjncy, vwgt, NULL, adjwgt,
nparts, tpwgts, ubvec, moptions, edgecut, part);
goto DONE;
}
/* Setup the graph */
if (*numflag > 0)
ChangeNumbering(vtxdist, xadj, adjncy, part, npes, mype, 1);
graph = SetupGraph(ctrl, *ncon, vtxdist, xadj, vwgt, NULL, adjncy, adjwgt, *wgtflag);
gk_free((void **)&graph->nvwgt, LTERM);
/* Allocate the workspace */
AllocateWSpace(ctrl, 10*graph->nvtxs);
/* Compute the initial npes-way partitioning geometric partitioning */
STARTTIMER(ctrl, ctrl->TotalTmr);
Coordinate_Partition(ctrl, graph, *ndims, xyz, 1);
STOPTIMER(ctrl, ctrl->TotalTmr);
/* Move the graph according to the partitioning */
STARTTIMER(ctrl, ctrl->MoveTmr);
ctrl->nparts = npes;
mgraph = MoveGraph(ctrl, graph);
ctrl->nparts = *nparts;
SetupGraph_nvwgts(ctrl, mgraph); /* compute nvwgts for the moved graph */
if (ctrl->dbglvl&DBG_INFO) {
CommInterfaceData(ctrl, graph, graph->where, graph->where+graph->nvtxs);
for (cut=0, i=0; i<graph->nvtxs; i++) {
for (j=graph->xadj[i]; j<graph->xadj[i+1]; j++) {
if (graph->where[i] != graph->where[graph->adjncy[j]])
cut += graph->adjwgt[j];
}
}
gcut = GlobalSESum(ctrl, cut)/2;
maxnvtxs = GlobalSEMax(ctrl, mgraph->nvtxs);
balance = (real_t)(maxnvtxs)/((real_t)(graph->gnvtxs)/(real_t)(npes));
rprintf(ctrl, "XYZ Cut: %6"PRIDX" \tBalance: %6.3"PRREAL" [%"PRIDX" %"PRIDX" %"PRIDX"]\n",
gcut, balance, maxnvtxs, graph->gnvtxs, npes);
}
STOPTIMER(ctrl, ctrl->MoveTmr);
/* Compute the partition of the moved graph */
STARTTIMER(ctrl, ctrl->TotalTmr);
ctrl->CoarsenTo = gk_min(vtxdist[npes]+1, 25*(*ncon)*gk_max(npes, *nparts));
if (vtxdist[npes] < SMALLGRAPH
|| vtxdist[npes] < npes*20
|| GlobalSESum(ctrl, mgraph->nedges) == 0) { /* serially */
IFSET(ctrl->dbglvl, DBG_INFO,
rprintf(ctrl, "Partitioning a graph of size %"PRIDX" serially\n", vtxdist[npes]));
PartitionSmallGraph(ctrl, mgraph);
}
else { /* in parallel */
Global_Partition(ctrl, mgraph);
}
ParallelReMapGraph(ctrl, mgraph);
/* Invert the ordering back to the original graph */
ctrl->nparts = npes;
ProjectInfoBack(ctrl, graph, part, mgraph->where);
ctrl->nparts = *nparts;
*edgecut = mgraph->mincut;
STOPTIMER(ctrl, ctrl->TotalTmr);
/* Print some stats */
IFSET(ctrl->dbglvl, DBG_TIME, PrintTimingInfo(ctrl));
IFSET(ctrl->dbglvl, DBG_TIME, gkMPI_Barrier(ctrl->gcomm));
IFSET(ctrl->dbglvl, DBG_INFO, PrintPostPartInfo(ctrl, mgraph, 0));
FreeGraph(mgraph);
FreeInitialGraphAndRemap(graph);
if (*numflag > 0)
ChangeNumbering(vtxdist, xadj, adjncy, part, npes, mype, 0);
DONE:
FreeCtrl(&ctrl);
if (gk_GetCurMemoryUsed() - curmem > 0) {
printf("ParMETIS appears to have a memory leak of %zdbytes. Report this.\n",
(ssize_t)(gk_GetCurMemoryUsed() - curmem));
}
gk_malloc_cleanup(0);
return (int)status;
}