VOS_VOID NAS_ESM_ProcTimerMsgT3481Exp(const VOS_VOID * pMsg)
{
VOS_UINT32 ulStateTblIndex = NAS_ESM_NULL;
VOS_UINT32 ulErrorCode = APP_ERR_TIME_OUT;
VOS_UINT32 ulActCidNum = NAS_ESM_NULL;
NAS_ESM_TIMER_STRU *pTimer3481 = VOS_NULL_PTR;
NAS_ESM_STATE_INFO_STRU *pstStateAddr = VOS_NULL_PTR;
/*打印进入该函数*/
NAS_ESM_NORM_LOG("NAS_ESM_ProcTimerMsgT3481Exp is entered.");
/*获取消息中包含的状态表StateTblIndex*/
ulStateTblIndex = PS_GET_REL_TIMER_NAME(pMsg);
pstStateAddr = NAS_ESM_GetStateTblAddr(ulStateTblIndex);
if (NAS_ESM_L_MODE_STATUS_NORMAL != NAS_ESM_GetLModeStatus())
{
NAS_ESM_WARN_LOG("NAS_ESM_ProcTimerMsgT3481Exp: L mode is already suspended!");
/*释放状态表资源*/
NAS_ESM_RelStateTblResource(ulStateTblIndex);
return ;
}
/*根据消息对应的ulStateTblIndex,获取相关联的定时器*/
pTimer3481 = NAS_ESM_GetStateTblTimer(ulStateTblIndex);
/*超时次数++*/
pTimer3481->ucExpireTimes++;
/*如果当前定时器超时次数小于NAS_ESM_MAX_TIMER_EXPIRE_TIMES次*/
if(pTimer3481->ucExpireTimes < TI_NAS_ESM_T3481_TIMER_MAX_EXP_NUM)
{
/*调用函数:SM向MM发送消息:NAS_ESMCN_BEARER_RES_MOD_REQ*/
NAS_ESM_SndEsmEmmDataReqMsg(pstStateAddr->stNwMsgRecord.ulOpId,
pstStateAddr->stNwMsgRecord.ucIsEmcPdnReq,
pstStateAddr->stNwMsgRecord.ulMsgLength,
pstStateAddr->stNwMsgRecord.aucMsgBuff);
/*重新启动定时器*/
NAS_ESM_TimerStart(ulStateTblIndex,TI_NAS_ESM_T3481);
/*上报空口消息*/
NAS_ESM_SndAirMsgReportInd(pstStateAddr->stNwMsgRecord.aucMsgBuff,
pstStateAddr->stNwMsgRecord.ulMsgLength,
NAS_ESM_AIR_MSG_DIR_ENUM_UP,
ESM_BEARER_RESOUCE_MOD_REQ);
return;
}
if(ID_APP_ESM_PDP_SETUP_REQ == NAS_ESM_GetStateTblAppMsgType(ulStateTblIndex) )
{
/*调用函数:发送确认消息通知APP，本次承载资源分配过程失败*/
NAS_ESM_SndEsmAppSdfSetupCnfFailMsg(ulStateTblIndex, ulErrorCode);
}
else if(ID_APP_ESM_PDP_RELEASE_REQ == NAS_ESM_GetStateTblAppMsgType(ulStateTblIndex) )
{
ulActCidNum = NAS_ESM_GetBearerLinkedCidNum(pstStateAddr->ulEpsbId);
/* 如果只对应一个激活的Cid,说明App要释放所有的SDF */
if (ulActCidNum == NAS_ESM_BEARER_ACT_CID_NUM_ONE)
{
/* 本地释放此承载 */
NAS_ESM_DeactBearerAndInformApp(pstStateAddr->ulEpsbId);
/*通知EMM当前承载状态信息，发送ID_EMM_ESM_BEARER_STATUS_REQ*/
NAS_ESM_SndEsmEmmBearerStatusReqMsg(EMM_ESM_BEARER_CNTXT_MOD_LOCAL);
}
else
{
NAS_ESM_SndEsmAppSdfModCnfFailMsg(ulStateTblIndex, ulErrorCode);
}
}
else
{
NAS_ESM_SndEsmAppSdfModCnfFailMsg(ulStateTblIndex, ulErrorCode);
}
/*释放状态表资源*/
NAS_ESM_RelStateTblResource(ulStateTblIndex);
}
VOS_VOID NAS_ESM_ProcTimerMsgT3492Exp(const VOS_VOID * pMsg)
{
VOS_UINT32 ulStateTblIndex = NAS_ESM_NULL;
NAS_ESM_TIMER_STRU *pTimer3492 = VOS_NULL_PTR;
NAS_ESM_STATE_INFO_STRU *pstStateAddr = VOS_NULL_PTR;
/*打印进入该函数*/
NAS_ESM_NORM_LOG("NAS_ESM_ProcTimerMsgT3492Exp is entered.");
/*获取消息中包含的状态表StateTblIndex*/
ulStateTblIndex = PS_GET_REL_TIMER_NAME(pMsg);
pstStateAddr = NAS_ESM_GetStateTblAddr(ulStateTblIndex);
if (NAS_ESM_L_MODE_STATUS_NORMAL != NAS_ESM_GetLModeStatus())
{
NAS_ESM_WARN_LOG("NAS_ESM_ProcTimerMsgT3492Exp: L mode is already suspended!");
/*释放状态表资源*/
NAS_ESM_RelStateTblResource(ulStateTblIndex);
return ;
}
/*根据消息对应的ulStateTblIndex,获取相关联的定时器*/
pTimer3492 = NAS_ESM_GetStateTblTimer(ulStateTblIndex);
/*超时次数++*/
pTimer3492->ucExpireTimes++;
/*如果当前定时器超时次数小于NAS_ESM_MAX_TIMER_EXPIRE_TIMES次*/
if(pTimer3492->ucExpireTimes < TI_NAS_ESM_T3492_TIMER_MAX_EXP_NUM)
{
/*调用函数:SM向MM发送消息:NAS_ESMCN_PDN_DISCONNECT_REQ*/
NAS_ESM_SndEsmEmmDataReqMsg(pstStateAddr->stNwMsgRecord.ulOpId,
pstStateAddr->stNwMsgRecord.ucIsEmcPdnReq,
pstStateAddr->stNwMsgRecord.ulMsgLength,
pstStateAddr->stNwMsgRecord.aucMsgBuff);
/*重新启动定时器*/
NAS_ESM_TimerStart(ulStateTblIndex,TI_NAS_ESM_T3492);
/*上报空口消息*/
NAS_ESM_SndAirMsgReportInd(pstStateAddr->stNwMsgRecord.aucMsgBuff,
pstStateAddr->stNwMsgRecord.ulMsgLength,
NAS_ESM_AIR_MSG_DIR_ENUM_UP,
ESM_PDN_DISCONNECT_REQ);
return;
}
else
{
NAS_ESM_WARN_LOG("NAS_ESM_DefltAttingBInactPPendMsgT3492Exp:WARNING:ExpireTimes exceed!");
/*本地释放缺省承载资源,向APP回复释放成功消息*/
NAS_ESM_DeactBearerAndInformApp(pstStateAddr->ulEpsbId);
/*通知EMM当前承载状态信息，发送ID_EMM_ESM_BEARER_STATUS_REQ*/
NAS_ESM_SndEsmEmmBearerStatusReqMsg(EMM_ESM_BEARER_CNTXT_MOD_LOCAL);
}
/*释放状态表资源*/
NAS_ESM_RelStateTblResource(ulStateTblIndex);
}
VOS_VOID NAS_ESM_ProcTimerMsgT3480Exp
(
const VOS_VOID * pMsg
)
{
VOS_UINT32 ulStateTblIndex = NAS_ESM_NULL;
VOS_UINT32 ulErrorCode = APP_ERR_TIME_OUT;
NAS_ESM_TIMER_STRU *pTimer3480 = VOS_NULL_PTR;
NAS_ESM_STATE_INFO_STRU *pstStateAddr = VOS_NULL_PTR;
/*打印进入该函数*/
NAS_ESM_NORM_LOG("NAS_ESM_ProcTimerMsgT3480Exp is entered.");
/*获取消息中包含的状态表StateTblIndex*/
ulStateTblIndex = PS_GET_REL_TIMER_NAME(pMsg);
pstStateAddr = NAS_ESM_GetStateTblAddr(ulStateTblIndex);
if (NAS_ESM_L_MODE_STATUS_NORMAL != NAS_ESM_GetLModeStatus())
{
NAS_ESM_WARN_LOG("NAS_ESM_ProcTimerMsgT3480Exp: L mode is already suspended!");
/*释放状态表资源*/
NAS_ESM_RelStateTblResource(ulStateTblIndex);
return ;
}
/*根据消息对应的ulStateTblIndex,获取相关联的定时器*/
pTimer3480 = NAS_ESM_GetStateTblTimer(ulStateTblIndex);
/*超时次数++*/
pTimer3480->ucExpireTimes++;
/*如果当前定时器超时次数小于NAS_ESM_MAX_TIMER_EXPIRE_TIMES次*/
if(pTimer3480->ucExpireTimes < TI_NAS_ESM_T3480_TIMER_MAX_EXP_NUM)
{
/*调用函数:SM向MM发送消息:NAS_ESMCN_BEARER_RES_MOD_REQ*/
NAS_ESM_SndEsmEmmDataReqMsg(pstStateAddr->stNwMsgRecord.ulOpId,
pstStateAddr->stNwMsgRecord.ucIsEmcPdnReq,
pstStateAddr->stNwMsgRecord.ulMsgLength,
pstStateAddr->stNwMsgRecord.aucMsgBuff);
/*重新启动定时器*/
NAS_ESM_TimerStart(ulStateTblIndex,TI_NAS_ESM_T3480);
/*上报空口消息*/
NAS_ESM_SndAirMsgReportInd(pstStateAddr->stNwMsgRecord.aucMsgBuff,
pstStateAddr->stNwMsgRecord.ulMsgLength,
NAS_ESM_AIR_MSG_DIR_ENUM_UP,
ESM_BEARER_RESOUCE_ALLOC_REQ);
return;
}
if(ID_APP_ESM_PDP_SETUP_REQ == NAS_ESM_GetStateTblAppMsgType(ulStateTblIndex) )
{
/*调用函数:发送确认消息通知APP，本次承载资源分配过程失败*/
NAS_ESM_SndEsmAppSdfSetupCnfFailMsg(ulStateTblIndex, ulErrorCode);
}
/*释放状态表资源*/
NAS_ESM_RelStateTblResource(ulStateTblIndex);
}
VOS_VOID NAS_ESM_ProcTimerMsgT3482Exp(const VOS_VOID * pMsg)
{
VOS_UINT32 ulStateTblIndex = NAS_ESM_NULL;
NAS_ESM_TIMER_STRU *pTimer3482 = VOS_NULL_PTR;
VOS_UINT32 ulErrorCode = APP_ERR_TIME_OUT;
NAS_ESM_STATE_INFO_STRU *pstStateAddr = VOS_NULL_PTR;
/*打印进入该函数*/
NAS_ESM_NORM_LOG("NAS_ESM_ProcTimerMsgT3482Exp is entered.");
/*获取消息中包含的状态表StateTblIndex*/
ulStateTblIndex = PS_GET_REL_TIMER_NAME(pMsg);
pstStateAddr = NAS_ESM_GetStateTblAddr(ulStateTblIndex);
if (NAS_ESM_L_MODE_STATUS_NORMAL != NAS_ESM_GetLModeStatus())
{
NAS_ESM_WARN_LOG("NAS_ESM_ProcTimerMsgT3482Exp: L mode is already suspended!");
/*释放状态表资源*/
NAS_ESM_RelStateTblResource(ulStateTblIndex);
return ;
}
#if (FEATURE_PTM == FEATURE_ON)
NAS_ESM_PdnConFailRecord(VOS_NULL_PTR, ESM_OM_ERRLOG_TIMEOUT_T3482);
#endif
/*根据消息对应的ulStateTblIndex,获取相关联的定时器T3482*/
pTimer3482 = NAS_ESM_GetStateTblTimer(ulStateTblIndex);
/*超时次数++*/
pTimer3482->ucExpireTimes++;
/*如果当前定时器超时次数小于NAS_ESM_MAX_TIMER_EXPIRE_TIMES次*/
if(pTimer3482->ucExpireTimes < TI_NAS_ESM_T3482_TIMER_MAX_EXP_NUM)
{
/*调用函数:SM向MM发送消息:NAS_ESMCN_MSG_TYPE_PDN_CONNECT_REQ*/
NAS_ESM_SndEsmEmmDataReqMsg(pstStateAddr->stNwMsgRecord.ulOpId,
pstStateAddr->stNwMsgRecord.ucIsEmcPdnReq,
pstStateAddr->stNwMsgRecord.ulMsgLength,
pstStateAddr->stNwMsgRecord.aucMsgBuff);
/*重新启动定时器*/
NAS_ESM_TimerStart(ulStateTblIndex,TI_NAS_ESM_T3482);
/*上报空口消息*/
NAS_ESM_SndAirMsgReportInd(pstStateAddr->stNwMsgRecord.aucMsgBuff,
pstStateAddr->stNwMsgRecord.ulMsgLength,
NAS_ESM_AIR_MSG_DIR_ENUM_UP,
ESM_PDN_CONNECT_REQ);
return;
}
else if(ID_APP_ESM_NDISCONN_REQ == NAS_ESM_GetStateTblAppMsgType(ulStateTblIndex) )
{
/*调用函数:发送确认消息通知APP，本次承载资源分配过程失败*/
NAS_ESM_LOG1("NAS_ESM_ProcTimerMsgT3482Exp:ERROR =", ulErrorCode);
NAS_ESM_SndEsmAppNdisConnCnfFailMsg(ulStateTblIndex, ulErrorCode);
}
else
{
NAS_ESM_WARN_LOG("NAS_ESM_ProcTimerMsgT3482Exp:WARNING:ExpireTimes exceed!");
/*向APP回复消息*/
NAS_ESM_SndEsmAppSdfSetupCnfFailMsg(ulStateTblIndex, \
APP_ERR_TIME_OUT);
}
/*释放状态表资源*/
NAS_ESM_RelStateTblResource(ulStateTblIndex);
}