/***************************************************************************************************
* @fn MT_NlmeOrphanJoinRequest
*
* @brief Orphan Join Request
*
* @param pBuf - pointer to the received buffer
*
* @return void
***************************************************************************************************/
void MT_NlmeOrphanJoinRequest(uint8 *pBuf)
{
uint8 i, j, attr;
uint8 retValue = ZFailure;
uint32 channelList;
uint8 cmdId;
if ( ZSTACK_END_DEVICE_BUILD )
{
/* parse header */
cmdId = pBuf[MT_RPC_POS_CMD1];
pBuf += MT_RPC_FRAME_HDR_SZ;
/* Channel list bit mask */
channelList = osal_build_uint32(pBuf, 4);
pBuf += sizeof(uint32);
/* Count number of channels */
j = attr = 0;
for (i = 0; i < ED_SCAN_MAXCHANNELS; i++)
{
if (channelList & (1 << i))
{
j++;
attr = i;
}
}
/* If only one channel specified */
if (j == 1)
{
_NIB.scanDuration = *pBuf;
_NIB.nwkLogicalChannel = attr;
_NIB.channelList = channelList;
if ( !_NIB.CapabilityInfo )
{
_NIB.CapabilityInfo = ZDO_Config_Node_Descriptor.CapabilityFlags;
}
devState = DEV_NWK_ORPHAN;
retValue = (uint8)NLME_OrphanJoinRequest(channelList, *pBuf);
}
else
{
retValue = ZNwkInvalidParam;
}
}
else
{
retValue = ZUnsupportedMode;
}
/* Build and send back the response */
MT_BuildAndSendZToolResponse(((uint8)MT_RPC_CMD_SRSP | (uint8)MT_RPC_SYS_NWK), cmdId, 1, &retValue);
}
/*********************************************************************
* @fn MT_NwkCommandProcessing
*
* @brief
*
* Process all the NWK commands that are issued by test tool
*
* @param cmd_id - Command ID
* @param len - Length of received SPI data message
* @param pData - pointer to received SPI data message
*
* @return void
*/
void MT_NwkCommandProcessing( uint16 cmd_id , byte len , byte *pData )
{
byte ret;
#if defined ( MT_NWK_FUNC )
uint8 dummyExPANID[Z_EXTADDR_LEN] = { 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF };
uint16 dstAddr;
#endif
#if defined ( MT_NWK_FUNC ) //NWK commands
byte attr;
byte index;
byte dataLen;
byte *dataPtr;
uint32 channelList;
byte databuf[SPI_RESP_LEN_NWK_DEFAULT + NWK_DEFAULT_GET_RESPONSE_LEN];
#if defined( ZDO_COORDINATOR )
uint16 panId;
#else
byte i,j;
#endif
#endif // MT_NWK_FUNC
len = SPI_0DATA_MSG_LEN + SPI_RESP_LEN_NWK_DEFAULT;
ret = (byte)ZSuccess;
switch (cmd_id)
{
#if defined( RTR_NWK )
case SPI_CMD_NLME_PERMIT_JOINING_REQ:
//The only information is PermitDuration
ret = (byte)NLME_PermitJoiningRequest( *pData );
break;
#endif
#if defined ( MT_NWK_FUNC ) //NWK commands
case SPI_CMD_NWK_INIT:
nwk_init( NWK_TaskID );
break;
case SPI_CMD_NLDE_DATA_REQ:
//First read the DstAddr
dstAddr = BUILD_UINT16( pData[1], pData[0] );
pData += sizeof( dstAddr );
//Get the NSDU details
dataLen = *pData++;
dataPtr = pData;
/* For now, skip a length of ZTEST_DEFAULT_DATA_LEN, instead of dataLen.
In future ZTOOL releases the data buffer will be only as long as dataLen */
//pData += dataLen;
pData += ZTEST_DEFAULT_DATA_LEN;
/* pData[0] = NSDUHandlde
pData[1] = NSDUHandleOptions
pData[3] = SecurityEnable
pData[4] = DiscoverRoute
pData[5] = RadiusCounter */
ret = (byte)MT_Nwk_DataRequest( dstAddr, dataLen, dataPtr, pData[0],
BUILD_UINT16( pData[2], pData[1] ),
pData[3], pData[4], pData[5]);
break;
#if defined( ZDO_COORDINATOR )
case SPI_CMD_NLME_INIT_COORD_REQ:
panId = BUILD_UINT16( pData[1], pData[0] );
MT_ReverseBytes( &pData[2], 4 );
channelList = osal_build_uint32( &pData[2], 4 );
ret = (byte)NLME_NetworkFormationRequest( panId, channelList, pData[6], pData[7],
pData[8], pData[9] );
break;
#endif // ZDO
#if defined( RTR_NWK )
case SPI_CMD_NLME_START_ROUTER_REQ:
// NOTE: first two parameters are not used, see NLMEDE.h for details
ret = (byte)NLME_StartRouterRequest( pData[0], pData[1], pData[2] );
break;
#endif // RTR
case SPI_CMD_NLME_JOIN_REQ:
ret = (byte)NLME_JoinRequest( dummyExPANID, BUILD_UINT16( pData[1], pData[0] ), pData[2], pData[3] );
if ( pData[3] & CAPINFO_RCVR_ON_IDLE )
{
// The receiver is on, turn network layer polling off.
NLME_SetPollRate( 0 );
NLME_SetQueuedPollRate( 0 );
NLME_SetResponseRate( 0 );
}
break;
case SPI_CMD_NLME_LEAVE_REQ:
{
NLME_LeaveReq_t req;
// if extAddr is all zeros, it means null pointer..
for( index = 0; ( ( index < Z_EXTADDR_LEN ) &&
( pData[index] == 0 ) ) ; index++ );
if ( index == Z_EXTADDR_LEN )
{
req.extAddr = NULL;
}
else
{
MT_ReverseBytes( pData, Z_EXTADDR_LEN );
req.extAddr = pData;
}
pData += Z_EXTADDR_LEN;
req.removeChildren = FALSE;
req.rejoin = FALSE;
req.silent = FALSE;
ret = (byte)NLME_LeaveReq( &req );
}
break;
case SPI_CMD_NLME_RESET_REQ:
//Its a direct call to reset NWK
ret = (byte)NLME_ResetRequest();
break;
case SPI_CMD_NLME_GET_REQ:
attr = *pData++;
index = *pData;
databuf[0] = (byte)NLME_GetRequest( (ZNwkAttributes_t )attr, index, &databuf[1] );
len = SPI_0DATA_MSG_LEN + SPI_RESP_LEN_NWK_DEFAULT + NWK_DEFAULT_GET_RESPONSE_LEN;
MT_BuildAndSendZToolResponse( len, (SPI_RESPONSE_BIT | SPI_CMD_NLME_GET_REQ),
(SPI_RESP_LEN_NWK_DEFAULT + NWK_DEFAULT_GET_RESPONSE_LEN), databuf );
return; // Don't return to this function
case SPI_CMD_NLME_SET_REQ:
ret = (byte)NLME_SetRequest( (ZNwkAttributes_t)pData[0], pData[1], &pData[2] );
osal_start_timerEx( ZDAppTaskID, ZDO_NWK_UPDATE_NV, 1000 );
break;
case SPI_CMD_NLME_NWK_DISC_REQ:
MT_ReverseBytes( pData, 4 );
ret = (byte)NLME_NetworkDiscoveryRequest( osal_build_uint32( pData, 4 ), pData[4] );
break;
#if !defined( ZDO_COORDINATOR )
case SPI_CMD_NLME_ORPHAN_JOIN_REQ:
// Channel list bit mask
MT_ReverseBytes( pData, 4 );
channelList = osal_build_uint32( pData, 4 );
// Count number of channels
j = attr = 0;
for ( i = 0; i < ED_SCAN_MAXCHANNELS; i++ )
{
if ( channelList & (1 << i) )
{
j++;
attr = i;
}
}
// If only one channel specified...
if ( j == 1 )
{
_NIB.scanDuration = pData[4];
_NIB.nwkLogicalChannel = attr;
_NIB.channelList = channelList;
if ( !_NIB.CapabilityInfo )
_NIB.CapabilityInfo = ZDO_Config_Node_Descriptor.CapabilityFlags;
devState = DEV_NWK_ORPHAN;
ret = (byte)NLME_OrphanJoinRequest( channelList, pData[4] );
}
else
ret = ZNwkInvalidParam;
break;
#endif // !ZDO
#if defined (RTR_NWK)
case SPI_CMD_NLME_ROUTE_DISC_REQ:
ret = (byte)NLME_RouteDiscoveryRequest( BUILD_UINT16( pData[1], pData[0] ), pData[2] );
break;
case SPI_CMD_NLME_DIRECT_JOIN_REQ:
MT_ReverseBytes( pData, 8 );
ret = (byte)NLME_DirectJoinRequest( pData, pData[8] );
break;
#endif // RTR
#endif // MT_NWK_FUNC
default:
ret = (byte)ZUnsupportedMode;
break;
}
#if defined ( MT_NWK_FUNC )
MT_SendSPIRespMsg( ret, cmd_id, len, SPI_RESP_LEN_NWK_DEFAULT );
#endif
(void)len;
(void)ret;
}