/*******************************************************************************
* @fn SensorTagOad_init
*
* @brief
* @param none
*
* @return none
*/
void SensorTagOad_init(void)
{
// Register connection parameter update
GAPRole_RegisterAppCBs(¶mUpdateCB);
SensorTagConnectionControl_init(); // Connection control to
// support OAD for iOs/Android
OAD_addService(); // OAD Profile
OAD_register((oadTargetCBs_t *)&sensorTag_oadCBs);
hOadQ = Util_constructQueue(&oadQ);
}
/*******************************************************************************
* @fn SensorTag_init
*
* @brief Called during initialization and contains application
* specific initialization (ie. hardware initialization/setup,
* table initialization, power up notification, etc), and
* profile initialization/setup.
*
* @param none
*
* @return none
*/
static void SensorTag_init(void)
{
//uint8_t selfTestMap;
// Setup I2C for sensors
//bspI2cInit();
// Handling of buttons, LED, relay
hGpioPin = PIN_open(&pinGpioState, SensortagAppPinTable);
PIN_registerIntCb(hGpioPin, SensorTag_callback);
// ***************************************************************************
// N0 STACK API CALLS CAN OCCUR BEFORE THIS CALL TO ICall_registerApp
// ***************************************************************************
// Register the current thread as an ICall dispatcher application
// so that the application can send and receive messages.
ICall_registerApp(&selfEntity, &sem);
// Create an RTOS queue for message from profile to be sent to app.
appMsgQueue = Util_constructQueue(&appMsg);
// Create one-shot clocks for internal periodic events.
Util_constructClock(&periodicClock, SensorTag_clockHandler,
ST_PERIODIC_EVT_PERIOD, 0, false, ST_PERIODIC_EVT);
// Setup the GAP
GAP_SetParamValue(TGAP_CONN_PAUSE_PERIPHERAL, DEFAULT_CONN_PAUSE_PERIPHERAL);
// Setup the GAP Peripheral Role Profile
{
// For all hardware platforms, device starts advertising upon initialization
uint8_t initialAdvertEnable = TRUE;
// By setting this to zero, the device will go into the waiting state after
// being discoverable for 30.72 second, and will not being advertising again
// until the enabler is set back to TRUE
uint16_t advertOffTime = 0;
uint8_t enableUpdateRequest = DEFAULT_ENABLE_UPDATE_REQUEST;
uint16_t desiredMinInterval = DEFAULT_DESIRED_MIN_CONN_INTERVAL;
uint16_t desiredMaxInterval = DEFAULT_DESIRED_MAX_CONN_INTERVAL;
uint16_t desiredSlaveLatency = DEFAULT_DESIRED_SLAVE_LATENCY;
uint16_t desiredConnTimeout = DEFAULT_DESIRED_CONN_TIMEOUT;
// Set the GAP Role Parameters
GAPRole_SetParameter(GAPROLE_ADVERT_ENABLED, sizeof(uint8_t),
&initialAdvertEnable);
GAPRole_SetParameter(GAPROLE_ADVERT_OFF_TIME, sizeof(uint16_t),
&advertOffTime);
//Returns 18, but this seems to be normal
GAPRole_SetParameter(GAPROLE_SCAN_RSP_DATA, sizeof(scanRspData),
scanRspData);
//Returns 18
GAPRole_SetParameter(GAPROLE_ADVERT_DATA, sizeof(advertData), advertData);
GAPRole_SetParameter(GAPROLE_PARAM_UPDATE_ENABLE, sizeof(uint8_t),
&enableUpdateRequest);
GAPRole_SetParameter(GAPROLE_MIN_CONN_INTERVAL, sizeof(uint16_t),
&desiredMinInterval);
GAPRole_SetParameter(GAPROLE_MAX_CONN_INTERVAL, sizeof(uint16_t),
&desiredMaxInterval);
GAPRole_SetParameter(GAPROLE_SLAVE_LATENCY, sizeof(uint16_t),
&desiredSlaveLatency);
GAPRole_SetParameter(GAPROLE_TIMEOUT_MULTIPLIER, sizeof(uint16_t),
&desiredConnTimeout);
}
// Set the GAP Characteristics
GGS_SetParameter(GGS_DEVICE_NAME_ATT, GAP_DEVICE_NAME_LEN,
(void*)attDeviceName);
#ifdef FEATURE_OAD
// Register connection parameter update
GAPRole_RegisterAppCBs( ¶mUpdateCB);
#endif
// Set advertising interval
{
uint16_t advInt = DEFAULT_ADVERTISING_INTERVAL;
GAP_SetParamValue(TGAP_LIM_DISC_ADV_INT_MIN, advInt);
GAP_SetParamValue(TGAP_LIM_DISC_ADV_INT_MAX, advInt);
GAP_SetParamValue(TGAP_GEN_DISC_ADV_INT_MIN, advInt);
GAP_SetParamValue(TGAP_GEN_DISC_ADV_INT_MAX, advInt);
}
// Initialize GATT attributes
GGS_AddService(GATT_ALL_SERVICES); // GAP
GATTServApp_AddService(GATT_ALL_SERVICES); // GATT attributes
DevInfo_AddService(); // Device Information Service
// Add application specific device information
SensorTag_setDeviceInfo();
#ifdef FACTORY_IMAGE
// Check if a factory image exists and apply current image if necessary
//if (!SensorTag_hasFactoryImage())
//{
// SensorTag_saveFactoryImage();
//}
#endif
#ifdef FEATURE_REGISTER_SERVICE
//Register_addService(); // Generic register access
//
#endif
#ifdef FEATURE_LCD
SensorTagDisplay_init(); // Display service DevPack LCD
#endif
#ifdef FEATURE_OAD
SensorTagConnectionControl_init(); // Connection control to
// support OAD for iOs/Android
OAD_addService(); // OAD Profile
OAD_register((oadTargetCBs_t *)&simpleBLEPeripheral_oadCBs);
hOadQ = Util_constructQueue(&oadQ);
#endif
// Start the Device
GAPRole_StartDevice(&SensorTag_gapRoleCBs);
// Start Bond Manager
GAPBondMgr_Register(NULL);
// Enable interrupt handling for keys and relay
PIN_registerIntCb(hGpioPin, SensorTag_callback);
}
/*********************************************************************
* @fn SimpleBLEPeripheral_init
*
* @brief Called during initialization and contains application
* specific initialization (ie. hardware initialization/setup,
* table initialization, power up notification, etc), and
* profile initialization/setup.
*
* @param None.
*
* @return None.
*/
static void SimpleBLEPeripheral_init(void)
{
// ******************************************************************
// N0 STACK API CALLS CAN OCCUR BEFORE THIS CALL TO ICall_registerApp
// ******************************************************************
// Register the current thread as an ICall dispatcher application
// so that the application can send and receive messages.
ICall_registerApp(&selfEntity, &sem);
#ifdef USE_RCOSC
RCOSC_enableCalibration();
#endif // USE_RCOSC
// Create an RTOS queue for message from profile to be sent to app.
appMsgQueue = Util_constructQueue(&appMsg);
// Create one-shot clocks for internal periodic events.
Util_constructClock(&periodicClock, SimpleBLEPeripheral_clockHandler,
SBP_PERIODIC_EVT_PERIOD, 0, false, SBP_PERIODIC_EVT);
#ifdef PLUS_OBSERVER
Board_initKeys(SimpleBLEPeripheral_keyChangeHandler);
#endif
dispHandle = Display_open(Display_Type_UART, NULL); //ZH change to UART for LP UART support
#ifdef PLUS_OBSERVER
//Setup GAP Observer params
{
uint8_t scanRes = DEFAULT_MAX_SCAN_RES;
GAPRole_SetParameter(GAPROLE_MAX_SCAN_RES, sizeof(uint8_t),
&scanRes);
// Set the GAP Characteristics
GAP_SetParamValue(TGAP_GEN_DISC_SCAN, DEFAULT_SCAN_DURATION); //how long to scan (in scan state)
GAP_SetParamValue(TGAP_LIM_DISC_SCAN, DEFAULT_SCAN_DURATION);
//Set scan interval
GAP_SetParamValue(TGAP_GEN_DISC_SCAN_INT, (DEFAULT_SCAN_INTERVAL)/(0.625)); //period for one scan channel
//Set scan window
GAP_SetParamValue(TGAP_GEN_DISC_SCAN_WIND, (DEFAULT_SCAN_WINDOW)/(0.625)); //active scanning time within scan interval
}
#endif
// Setup the GAP
GAP_SetParamValue(TGAP_CONN_PAUSE_PERIPHERAL, DEFAULT_CONN_PAUSE_PERIPHERAL);
// Setup the GAP Peripheral Role Profile
{
// For all hardware platforms, device starts advertising upon initialization
uint8_t initialAdvertEnable = TRUE;
// By setting this to zero, the device will go into the waiting state after
// being discoverable for 30.72 second, and will not being advertising again
// until the enabler is set back to TRUE
uint16_t advertOffTime = 0;
uint8_t enableUpdateRequest = DEFAULT_ENABLE_UPDATE_REQUEST;
uint16_t desiredMinInterval = DEFAULT_DESIRED_MIN_CONN_INTERVAL;
uint16_t desiredMaxInterval = DEFAULT_DESIRED_MAX_CONN_INTERVAL;
uint16_t desiredSlaveLatency = DEFAULT_DESIRED_SLAVE_LATENCY;
uint16_t desiredConnTimeout = DEFAULT_DESIRED_CONN_TIMEOUT;
// Set the GAP Role Parameters
GAPRole_SetParameter(GAPROLE_ADVERT_ENABLED, sizeof(uint8_t),
&initialAdvertEnable);
GAPRole_SetParameter(GAPROLE_ADVERT_OFF_TIME, sizeof(uint16_t),
&advertOffTime);
GAPRole_SetParameter(GAPROLE_SCAN_RSP_DATA, sizeof(scanRspData),
scanRspData);
GAPRole_SetParameter(GAPROLE_ADVERT_DATA, sizeof(advertData), advertData);
GAPRole_SetParameter(GAPROLE_PARAM_UPDATE_ENABLE, sizeof(uint8_t),
&enableUpdateRequest);
GAPRole_SetParameter(GAPROLE_MIN_CONN_INTERVAL, sizeof(uint16_t),
&desiredMinInterval);
GAPRole_SetParameter(GAPROLE_MAX_CONN_INTERVAL, sizeof(uint16_t),
&desiredMaxInterval);
GAPRole_SetParameter(GAPROLE_SLAVE_LATENCY, sizeof(uint16_t),
&desiredSlaveLatency);
GAPRole_SetParameter(GAPROLE_TIMEOUT_MULTIPLIER, sizeof(uint16_t),
&desiredConnTimeout);
}
// Set the GAP Characteristics
GGS_SetParameter(GGS_DEVICE_NAME_ATT, GAP_DEVICE_NAME_LEN, attDeviceName);
// Set advertising interval
{
uint16_t advInt = DEFAULT_ADVERTISING_INTERVAL;
GAP_SetParamValue(TGAP_LIM_DISC_ADV_INT_MIN, advInt);
GAP_SetParamValue(TGAP_LIM_DISC_ADV_INT_MAX, advInt);
GAP_SetParamValue(TGAP_GEN_DISC_ADV_INT_MIN, advInt);
GAP_SetParamValue(TGAP_GEN_DISC_ADV_INT_MAX, advInt);
}
// Setup the GAP Bond Manager
{
uint32_t passkey = 0; // passkey "000000"
uint8_t pairMode = GAPBOND_PAIRING_MODE_WAIT_FOR_REQ;
uint8_t mitm = TRUE;
uint8_t ioCap = GAPBOND_IO_CAP_DISPLAY_ONLY;
uint8_t bonding = TRUE;
GAPBondMgr_SetParameter(GAPBOND_DEFAULT_PASSCODE, sizeof(uint32_t),
&passkey);
GAPBondMgr_SetParameter(GAPBOND_PAIRING_MODE, sizeof(uint8_t), &pairMode);
GAPBondMgr_SetParameter(GAPBOND_MITM_PROTECTION, sizeof(uint8_t), &mitm);
GAPBondMgr_SetParameter(GAPBOND_IO_CAPABILITIES, sizeof(uint8_t), &ioCap);
GAPBondMgr_SetParameter(GAPBOND_BONDING_ENABLED, sizeof(uint8_t), &bonding);
}
// Initialize GATT attributes
GGS_AddService(GATT_ALL_SERVICES); // GAP
GATTServApp_AddService(GATT_ALL_SERVICES); // GATT attributes
DevInfo_AddService(); // Device Information Service
#ifndef FEATURE_OAD_ONCHIP
SimpleProfile_AddService(GATT_ALL_SERVICES); // Simple GATT Profile
#endif //!FEATURE_OAD_ONCHIP
#ifdef FEATURE_OAD
VOID OAD_addService(); // OAD Profile
OAD_register((oadTargetCBs_t *)&simpleBLEPeripheral_oadCBs);
hOadQ = Util_constructQueue(&oadQ);
#endif //FEATURE_OAD
#ifdef IMAGE_INVALIDATE
Reset_addService();
#endif //IMAGE_INVALIDATE
#ifndef FEATURE_OAD_ONCHIP
// Setup the SimpleProfile Characteristic Values
{
uint8_t charValue1 = 1;
uint8_t charValue2 = 2;
uint8_t charValue3 = 3;
uint8_t charValue4 = 4;
uint8_t charValue5[SIMPLEPROFILE_CHAR5_LEN] = { 1, 2, 3, 4, 5 };
SimpleProfile_SetParameter(SIMPLEPROFILE_CHAR1, sizeof(uint8_t),
&charValue1);
SimpleProfile_SetParameter(SIMPLEPROFILE_CHAR2, sizeof(uint8_t),
&charValue2);
SimpleProfile_SetParameter(SIMPLEPROFILE_CHAR3, sizeof(uint8_t),
&charValue3);
SimpleProfile_SetParameter(SIMPLEPROFILE_CHAR4, sizeof(uint8_t),
&charValue4);
SimpleProfile_SetParameter(SIMPLEPROFILE_CHAR5, SIMPLEPROFILE_CHAR5_LEN,
charValue5);
}
// Register callback with SimpleGATTprofile
SimpleProfile_RegisterAppCBs(&SimpleBLEPeripheral_simpleProfileCBs);
#endif //!FEATURE_OAD_ONCHIP
// Start the Device
VOID GAPRole_StartDevice(&SimpleBLEPeripheral_gapRoleCBs);
// Start Bond Manager
VOID GAPBondMgr_Register(&simpleBLEPeripheral_BondMgrCBs);
// Register with GAP for HCI/Host messages
GAP_RegisterForMsgs(selfEntity);
// Register for GATT local events and ATT Responses pending for transmission
GATT_RegisterForMsgs(selfEntity);
HCI_LE_ReadMaxDataLenCmd();
#if defined FEATURE_OAD
#if defined (HAL_IMAGE_A)
Display_print0(dispHandle, 0, 0, "BLE Peripheral A");
#else
Display_print0(dispHandle, 0, 0, "BLE Peripheral B");
#endif // HAL_IMAGE_A
#else
#ifdef PLUS_OBSERVER
Display_print0(dispHandle, 0, 0, "BLE Peripheral Observer");
#else
Display_print0(dispHandle, 0, 0, "BLE Peripheral");
#endif
#endif // FEATURE_OAD
}
