//-----------------------------------------------------------------------
Math::Math( unsigned int trigTableSize )
{
msAngleUnit = AU_DEGREE;
mTrigTableSize = trigTableSize;
mTrigTableFactor = mTrigTableSize / Math::TWO_PI;
mSinTable = OGRE_ALLOC_T(Real, mTrigTableSize, MEMCATEGORY_GENERAL);
mTanTable = OGRE_ALLOC_T(Real, mTrigTableSize, MEMCATEGORY_GENERAL);
buildTrigTables();
}
void SplattingManager::createColourMap(Image& image, const ColourList& colours)
{
if (colours.size() > mImpl->numTextures)
OGRE_EXCEPT(Exception::ERR_INVALIDPARAMS, "Given more colours than texture channels available.", __FUNCTION__);
#if OGRE_VERSION_MINOR > 4
uchar* data = OGRE_ALLOC_T(uchar, mImpl->width*mImpl->height*3, MEMCATEGORY_GENERAL);
#else
uchar* data = new uchar[mImpl->width*mImpl->height*3];
#endif
for (size_t y = 0; y < mImpl->height; ++y)
{
for (size_t x = 0; x < mImpl->width; ++x)
{
ColourValue val (0, 0, 0);
for (size_t i = 0; i < colours.size(); ++i)
{
size_t m = i / mImpl->channels;
uint t = (uint) (i % mImpl->channels);
val += colours[i] * (float(mImpl->maps[m]->getValue((uint)x, (uint)y, t)) / 255);
}
size_t pos = (x + y * mImpl->width) * 3;
data[pos+0] = uchar(255*val.r);
data[pos+1] = uchar(255*val.g);
data[pos+2] = uchar(255*val.b);
}
}
image.loadDynamicImage(data, mImpl->width, mImpl->height, 1, PF_BYTE_RGB, true);
}
//-----------------------------------------------------------------------------
void ManualObject::resizeTempIndexBufferIfNeeded(size_t numInds)
{
size_t newSize = numInds * sizeof(uint32);
if (newSize > mTempIndexSize || !mTempIndexBuffer)
{
if (!mTempIndexBuffer)
{
// init
newSize = mTempIndexSize;
}
else
{
// increase to at least double current
newSize = std::max(newSize, mTempIndexSize*2);
}
numInds = newSize / sizeof(uint32);
uint32* tmp = mTempIndexBuffer;
mTempIndexBuffer = OGRE_ALLOC_T(uint32, numInds, MEMCATEGORY_GEOMETRY);
if (tmp)
{
memcpy(mTempIndexBuffer, tmp, mTempIndexSize);
OGRE_FREE(tmp, MEMCATEGORY_GEOMETRY);
}
mTempIndexSize = newSize;
}
}
//-----------------------------------------------------------------------------
Image & Image::operator = ( const Image &img )
{
if( m_pBuffer && m_bAutoDelete )
{
OGRE_FREE(m_pBuffer, MEMCATEGORY_GENERAL);
m_pBuffer = NULL;
}
m_uWidth = img.m_uWidth;
m_uHeight = img.m_uHeight;
m_uDepth = img.m_uDepth;
m_eFormat = img.m_eFormat;
m_uSize = img.m_uSize;
m_uFlags = img.m_uFlags;
m_ucPixelSize = img.m_ucPixelSize;
m_uNumMipmaps = img.m_uNumMipmaps;
m_bAutoDelete = img.m_bAutoDelete;
//Only create/copy when previous data was not dynamic data
if( m_bAutoDelete )
{
m_pBuffer = OGRE_ALLOC_T(uchar, m_uSize, MEMCATEGORY_GENERAL);
memcpy( m_pBuffer, img.m_pBuffer, m_uSize );
}
else
{
m_pBuffer = img.m_pBuffer;
}
return *this;
}
//-----------------------------------------------------------------------------
Image & Image::flipAroundX()
{
if( !mBuffer )
{
OGRE_EXCEPT(
Exception::ERR_INTERNAL_ERROR,
"Can not flip an uninitialised texture",
"Image::flipAroundX" );
}
mNumMipmaps = 0; // Image operations lose precomputed mipmaps
size_t rowSpan = mWidth * mPixelSize;
uchar *pTempBuffer = OGRE_ALLOC_T(uchar, rowSpan * mHeight, MEMCATEGORY_GENERAL);
uchar *ptr1 = mBuffer, *ptr2 = pTempBuffer + ( ( mHeight - 1 ) * rowSpan );
for( ushort i = 0; i < mHeight; i++ )
{
memcpy( ptr2, ptr1, rowSpan );
ptr1 += rowSpan; ptr2 -= rowSpan;
}
memcpy( mBuffer, pTempBuffer, rowSpan * mHeight);
OGRE_FREE(pTempBuffer, MEMCATEGORY_GENERAL);
return *this;
}
//-----------------------------------------------------------------------------
Image & Image::operator = ( const Image &img )
{
freeMemory();
mWidth = img.mWidth;
mHeight = img.mHeight;
mDepth = img.mDepth;
mFormat = img.mFormat;
mBufSize = img.mBufSize;
mFlags = img.mFlags;
mPixelSize = img.mPixelSize;
mNumMipmaps = img.mNumMipmaps;
mAutoDelete = img.mAutoDelete;
//Only create/copy when previous data was not dynamic data
if( mAutoDelete )
{
mBuffer = OGRE_ALLOC_T(uchar, mBufSize, MEMCATEGORY_GENERAL);
memcpy( mBuffer, img.mBuffer, mBufSize );
}
else
{
mBuffer = img.mBuffer;
}
return *this;
}
Image createMinimap(const Image& colourMap, const Image& lightMap)
{
if (colourMap.getWidth() != lightMap.getWidth() || colourMap.getHeight() != lightMap.getHeight())
OGRE_EXCEPT(Exception::ERR_INVALIDPARAMS, "Images must have the same dimensions.", __FUNCTION__);
#if OGRE_VERSION_MINOR > 4
uchar* data = OGRE_ALLOC_T(uchar, colourMap.getWidth()*colourMap.getHeight()*3, MEMCATEGORY_GENERAL);
#else
uchar* data = new uchar[colourMap.getWidth()*colourMap.getHeight()*3];
#endif
for (size_t y = 0; y < colourMap.getWidth(); ++y)
{
for (size_t x = 0; x < colourMap.getHeight(); ++x)
{
ColourValue val = const_cast<Image&>(colourMap).getColourAt((uint)x, (uint)y, 0) * const_cast<Image&>(lightMap).getColourAt((uint)x, (uint)y, 0);
size_t pos = (x + y*colourMap.getWidth()) * 3;
data[pos+0] = uchar(255*val.r);
data[pos+1] = uchar(255*val.g);
data[pos+2] = uchar(255*val.b);
}
}
Image image;
image.loadDynamicImage(data, colourMap.getWidth(), colourMap.getHeight(), 1, PF_BYTE_RGB, true);
return image;
}
//---------------------------------------------------------------------
DataStreamPtr FreeImageCodec::code(MemoryDataStreamPtr& input, Codec::CodecDataPtr& pData) const
{
// Set error handler
FreeImage_SetOutputMessage(FreeImageSaveErrorHandler);
FIBITMAP* fiBitmap = encode(input, pData);
// open memory chunk allocated by FreeImage
FIMEMORY* mem = FreeImage_OpenMemory();
// write data into memory
FreeImage_SaveToMemory((FREE_IMAGE_FORMAT)mFreeImageType, fiBitmap, mem);
// Grab data information
BYTE* data;
DWORD size;
FreeImage_AcquireMemory(mem, &data, &size);
// Copy data into our own buffer
// Because we're asking MemoryDataStream to free this, must create in a compatible way
BYTE* ourData = OGRE_ALLOC_T(BYTE, size, MEMCATEGORY_GENERAL);
memcpy(ourData, data, size);
// Wrap data in stream, tell it to free on close
DataStreamPtr outstream(OGRE_NEW MemoryDataStream(ourData, size, true));
// Now free FreeImage memory buffers
FreeImage_CloseMemory(mem);
// Unload bitmap
FreeImage_Unload(fiBitmap);
return outstream;
}
//---------------------------------------------------------------------
void DeflateStream::init()
{
mpZStream = OGRE_ALLOC_T(z_stream, 1, MEMCATEGORY_GENERAL);
mpZStream->zalloc = OgreZalloc;
mpZStream->zfree = OgreZfree;
if (getAccessMode() == READ)
{
mpTmp = (unsigned char*)OGRE_MALLOC(OGRE_DEFLATE_TMP_SIZE, MEMCATEGORY_GENERAL);
size_t restorePoint = mCompressedStream->tell();
// read early chunk
mpZStream->next_in = mpTmp;
mpZStream->avail_in = mCompressedStream->read(mpTmp, OGRE_DEFLATE_TMP_SIZE);
if (inflateInit(mpZStream) != Z_OK)
{
mIsCompressedValid = false;
}
else
mIsCompressedValid = true;
if (mIsCompressedValid)
{
// in fact, inflateInit on some implementations doesn't try to read
// anything. We need to at least read something to test
Bytef testOut[4];
size_t savedIn = mpZStream->avail_in;
mpZStream->avail_out = 4;
mpZStream->next_out = testOut;
if (inflate(mpZStream, Z_SYNC_FLUSH) != Z_OK)
mIsCompressedValid = false;
// restore for reading
mpZStream->avail_in = savedIn;
mpZStream->next_in = mpTmp;
inflateReset(mpZStream);
}
if (!mIsCompressedValid)
{
// Not compressed data!
// Fail gracefully, fall back on reading the underlying stream direct
destroy();
mCompressedStream->seek(restorePoint);
}
}
else
{
// Write to temp file
char tmpname[L_tmpnam];
tmpnam(tmpname);
mTempFileName = tmpname;
std::fstream *f = OGRE_NEW_T(std::fstream, MEMCATEGORY_GENERAL)();
f->open(tmpname, std::ios::binary | std::ios::out);
mTmpWriteStream = DataStreamPtr(OGRE_NEW FileStreamDataStream(f));
}
}
//-----------------------------------------------------------------------------
D3D9HardwarePixelBuffer::BufferResources* D3D9HardwarePixelBuffer::createBufferResources()
{
BufferResources* newResources = OGRE_ALLOC_T(BufferResources, 1, MEMCATEGORY_RENDERSYS);
memset(newResources, 0, sizeof(BufferResources));
return newResources;
}
void GlobalMap::clear()
{
Ogre::uchar* buffer = OGRE_ALLOC_T(Ogre::uchar, mWidth * mHeight * 4, Ogre::MEMCATEGORY_GENERAL);
memset(buffer, 0, mWidth * mHeight * 4);
mOverlayImage.loadDynamicImage(&buffer[0], mWidth, mHeight, 1, Ogre::PF_A8B8G8R8, true); // pass ownership of buffer to image
mOverlayTexture->load();
}
//-----------------------------------------------------------------------
void RenderTarget::writeContentsToFile(const String& filename)
{
PixelFormat pf = suggestPixelFormat();
uchar *data = OGRE_ALLOC_T(uchar, mWidth * mHeight * PixelUtil::getNumElemBytes(pf), MEMCATEGORY_RENDERSYS);
PixelBox pb(mWidth, mHeight, 1, pf, data);
copyContentsToMemory(pb);
Image().loadDynamicImage(data, mWidth, mHeight, 1, pf, false, 1, 0).save(filename);
OGRE_FREE(data, MEMCATEGORY_RENDERSYS);
}
HalfFloatGridSource::HalfFloatGridSource(const String &serializedVolumeFile, const bool trilinearValue, const bool trilinearGradient, const bool sobelGradient) :
GridSource(trilinearValue, trilinearGradient, sobelGradient)
{
Timer t;
DataStreamPtr streamRead = Root::getSingleton().openFileStream(serializedVolumeFile);
#if OGRE_NO_ZIP_ARCHIVE == 0
DataStreamPtr uncompressStream(OGRE_NEW DeflateStream(serializedVolumeFile, streamRead));
StreamSerialiser ser(uncompressStream);
#else
StreamSerialiser ser(streamRead);
#endif
if (!ser.readChunkBegin(VOLUME_CHUNK_ID, VOLUME_CHUNK_VERSION))
{
OGRE_EXCEPT(Exception::ERR_INVALID_STATE,
"Invalid volume file given!",
__FUNCTION__);
}
// Read header
Vector3 readFrom, readTo;
ser.read(&readFrom);
ser.read(&readTo);
float voxelWidth;
ser.read<float>(&voxelWidth);
size_t width, height, depth;
ser.read<size_t>(&width);
ser.read<size_t>(&height);
ser.read<size_t>(&depth);
mWidth = static_cast<int>(width);
mHeight = static_cast<int>(height);
mDepth = static_cast<int>(depth);
mDepthTimesHeight = static_cast<int>(mDepth * mHeight);
Vector3 worldDimension = readTo - readFrom;
mPosXScale = (Real)1.0 / (Real)worldDimension.x * (Real)mWidth;
mPosYScale = (Real)1.0 / (Real)worldDimension.y * (Real)mHeight;
mPosZScale = (Real)1.0 / (Real)worldDimension.z * (Real)mDepth;
mVolumeSpaceToWorldSpaceFactor = (Real)worldDimension.x * (Real)mWidth;
mMaxClampedAbsoluteDensity = 0;
// Read data
size_t elementCount = mWidth * mHeight * mDepth;
mData = OGRE_ALLOC_T(uint16, elementCount, MEMCATEGORY_GENERAL);
ser.read(mData, elementCount);
ser.readChunkEnd(VOLUME_CHUNK_ID);
LogManager::getSingleton().stream() << "Processed serialization in " << t.getMilliseconds() << "ms.";
}
void saveBrushToImage(const Brush& brush, Image& image)
{
// save brush as a 16bit grayscale image
#if OGRE_VERSION_MINOR > 4
ushort* data = (ushort*)OGRE_ALLOC_T(uchar, brush.getWidth()*brush.getHeight()*sizeof(ushort), MEMCATEGORY_GENERAL);
#else
ushort* data = (ushort*)new uchar[brush.getWidth()*brush.getHeight()*sizeof(ushort)];
#endif
for (size_t x = 0; x < brush.getWidth(); ++x)
for (size_t y = 0; y < brush.getHeight(); ++y)
data[y*brush.getWidth() + x] = ushort(brush.at(x, y) * 0xffff);
// pass the data to the image, image takes over ownership
image.loadDynamicImage((uchar*)data, brush.getWidth(), brush.getHeight(), 1, PF_L16, true);
}
// bool publishFrame(Ogre::RenderWindow * render_object, const std::string frame_id)
bool publishFrame(Ogre::RenderTexture * render_object, const std::string frame_id)
{
if (pub_.getTopic() == "")
{
return false;
}
if (frame_id == "")
{
return false;
}
// RenderTarget::writeContentsToFile() used as example
int height = render_object->getHeight();
int width = render_object->getWidth();
// the results of pixel format have to be used to determine
// image.encoding
Ogre::PixelFormat pf = render_object->suggestPixelFormat();
uint pixelsize = Ogre::PixelUtil::getNumElemBytes(pf);
uint datasize = width * height * pixelsize;
// 1.05 multiplier is to avoid crash when the window is resized.
// There should be a better solution.
uchar *data = OGRE_ALLOC_T(uchar, datasize * 1.05, Ogre::MEMCATEGORY_RENDERSYS);
Ogre::PixelBox pb(width, height, 1, pf, data);
render_object->copyContentsToMemory(pb, Ogre::RenderTarget::FB_AUTO);
sensor_msgs::Image image;
image.header.stamp = ros::Time::now();
image.header.seq = image_id_++;
image.header.frame_id = frame_id;
image.height = height;
image.width = width;
image.step = pixelsize * width;
if (pixelsize == 3)
image.encoding = sensor_msgs::image_encodings::RGB8; // would break if pf changes
else if (pixelsize == 4)
image.encoding = sensor_msgs::image_encodings::RGBA8; // would break if pf changes
else
{
ROS_ERROR_STREAM("unknown pixe format " << pixelsize << " " << pf);
}
image.is_bigendian = (OGRE_ENDIAN == OGRE_ENDIAN_BIG);
image.data.resize(datasize);
memcpy(&image.data[0], data, datasize);
pub_.publish(image);
OGRE_FREE(data, Ogre::MEMCATEGORY_RENDERSYS);
}
//-----------------------------------------------------------------------------
Image& Image::loadDynamicImage( uchar* pData, size_t uWidth, size_t uHeight,
size_t depth,
PixelFormat eFormat, bool autoDelete,
size_t numFaces, size_t numMipMaps)
{
if( m_pBuffer && m_bAutoDelete )
{
OGRE_FREE(m_pBuffer, MEMCATEGORY_GENERAL);
m_pBuffer = NULL;
}
// Set image metadata
m_uWidth = uWidth;
m_uHeight = uHeight;
m_uDepth = depth;
m_eFormat = eFormat;
m_ucPixelSize = static_cast<uchar>(PixelUtil::getNumElemBytes( m_eFormat ));
m_uNumMipmaps = numMipMaps;
m_uFlags = 0;
// Set flags
if (PixelUtil::isCompressed(eFormat))
m_uFlags |= IF_COMPRESSED;
if (m_uDepth != 1)
m_uFlags |= IF_3D_TEXTURE;
if(numFaces == 6)
m_uFlags |= IF_CUBEMAP;
if(numFaces != 6 && numFaces != 1)
OGRE_EXCEPT(Exception::ERR_INVALIDPARAMS,
"Number of faces currently must be 6 or 1.",
"Image::loadDynamicImage");
m_uSize = calculateSize(numMipMaps, numFaces, uWidth, uHeight, depth, eFormat);
if (pData)
{
m_pBuffer = pData;
m_bAutoDelete = autoDelete;
}
else
{
m_bAutoDelete = true;
m_pBuffer = OGRE_ALLOC_T(Ogre::uchar, m_uSize, Ogre::MEMCATEGORY_RESOURCE);
}
return *this;
}
void SplattingManager::createBaseTexture(Image& image, size_t width, size_t height,
ImageList textures, float repeatX, float repeatZ)
{
if (textures.size() > mImpl->numTextures)
OGRE_EXCEPT(Exception::ERR_INVALIDPARAMS, "Given more textures than texture channels available.", "ET::SplattingManager::createBaseTexture");
// first resize the textures according to the desired output size and the repeat values
ushort scaleWidth = (ushort) (width / repeatX);
ushort scaleHeight = (ushort) (height / repeatZ);
for (ImageList::iterator it = textures.begin(); it != textures.end(); ++it)
it->resize(scaleWidth, scaleHeight);
// create the buffer to hold our generated base texture
#if OGRE_VERSION_MINOR > 4
uchar* data = OGRE_ALLOC_T(uchar, width*height*3, MEMCATEGORY_GENERAL);
#else
uchar* data = new uchar[width*height*3];
#endif
size_t pos = 0;
for (size_t y = 0; y < height; ++y)
{
for (size_t x = 0; x < width; ++x)
{
ColourValue val (0,0,0);
int texX = (int) (x % scaleWidth);
int texY = (int) (y % scaleHeight);
for (size_t t = 0; t < textures.size(); ++t)
{
// get interpolated part of this texture at the current pixel
float weight = mImpl->interpolateWeight(x, y, width, height, t);
// get colour value of the texture image
ColourValue col = textures[t].getColourAt(texX, texY, 0);
// add to the pixel colour level
val += weight*col;
}
// write colour to our buffer
data[pos+0] = uchar(255*val.r);
data[pos+1] = uchar(255*val.g);
data[pos+2] = uchar(255*val.b);
pos += 3;
}
}
image.loadDynamicImage(data, width, height, 1, PF_BYTE_RGB, true);
}
//-----------------------------------------------------------------------------
void Image::resize(ushort width, ushort height, Filter filter)
{
// resizing dynamic images is not supported
assert(mAutoDelete);
assert(mDepth == 1);
// reassign buffer to temp image, make sure auto-delete is true
Image temp;
temp.loadDynamicImage(mBuffer, mWidth, mHeight, 1, mFormat, true);
// do not delete[] mBuffer! temp will destroy it
// set new dimensions, allocate new buffer
mWidth = width;
mHeight = height;
mBufSize = PixelUtil::getMemorySize(mWidth, mHeight, 1, mFormat);
mBuffer = OGRE_ALLOC_T(uchar, mBufSize, MEMCATEGORY_GENERAL);
mNumMipmaps = 0; // Loses precomputed mipmaps
// scale the image from temp into our resized buffer
Image::scale(temp.getPixelBox(), getPixelBox(), filter);
}
Vector4* SnowTerrain::convertNormalsToFloats(PixelBox* terrainNormals, bool compressed)
{
const size_t srcPixelSize = PixelUtil::getNumElemBytes(terrainNormals->format);
const size_t dstPixelSize = PixelUtil::getNumElemBytes(PF_FLOAT32_RGBA);
size_t w,h,d;
w = terrainNormals->getWidth();
h = terrainNormals->getHeight();
d = terrainNormals->getDepth();
assert(terrainNormals->getWidth() == mTerrainSize);
size_t terrainNormalSize = terrainNormals->getWidth()*terrainNormals->getHeight();
Vector4* terrainNormalDataCorrected = OGRE_ALLOC_T(Vector4, terrainNormalSize, MEMCATEGORY_GENERAL);
size_t i = 0; size_t j = 0;
uint8* pixelsBuffer = static_cast<uint8*>(terrainNormals->data);
for(; i < terrainNormalSize * srcPixelSize && j < terrainNormalSize * sizeof(Vector4); i+=srcPixelSize)
{
uint8 r,g,b,a;
PixelUtil::unpackColour(&r,&g,&b,&a, terrainNormals->format, static_cast<void*>(&pixelsBuffer[i]));
float fr,fg,fb;
if(compressed)
{
//(signed) float packed/compressed into uint8, unpack
fr = ((float)(r))/(0.5f * 255.0f) - 1.0f;
fg = ((float)(g))/(0.5f * 255.0f) - 1.0f;
fb = ((float)(b))/(0.5f * 255.0f) - 1.0f;
}
else
{
fr = ((float)(r))/255.0f;
fg = ((float)(g))/255.0f;
fb = ((float)(b))/255.0f;
}
Vector3 v = Vector3(fr, fg, fb);
v.normalise();
terrainNormalDataCorrected[j++] = Vector4(v);
}
return terrainNormalDataCorrected;
}
//-----------------------------------------------------------------------------
Image & Image::loadRawData(
DataStreamPtr& stream,
uint32 uWidth, uint32 uHeight, uint32 uDepth,
PixelFormat eFormat,
size_t numFaces, size_t numMipMaps)
{
size_t size = calculateSize(numMipMaps, numFaces, uWidth, uHeight, uDepth, eFormat);
if (size != stream->size())
{
OGRE_EXCEPT(Exception::ERR_INVALIDPARAMS,
"Stream size does not match calculated image size",
"Image::loadRawData");
}
uchar *buffer = OGRE_ALLOC_T(uchar, size, MEMCATEGORY_GENERAL);
stream->read(buffer, size);
return loadDynamicImage(buffer,
uWidth, uHeight, uDepth,
eFormat, true, numFaces, numMipMaps);
}
//-----------------------------------------------------------------------
void ConvexBody::clip( const Plane& pl, bool keepNegative )
{
if ( getPolygonCount() == 0 )
return;
// current will be used as the reference body
ConvexBody current;
current.moveDataFromBody(*this);
OgreAssert( this->getPolygonCount() == 0, "Body not empty!" );
OgreAssert( current.getPolygonCount() != 0, "Body empty!" );
// holds all intersection edges for the different polygons
Polygon::EdgeMap intersectionEdges;
// clip all polygons by the intersection plane
// add only valid or intersected polygons to *this
for ( size_t iPoly = 0; iPoly < current.getPolygonCount(); ++iPoly )
{
// fetch vertex count and ignore polygons with less than three vertices
// the polygon is not valid and won't be added
const size_t vertexCount = current.getVertexCount( iPoly );
if ( vertexCount < 3 )
continue;
// current polygon
const Polygon& p = current.getPolygon( iPoly );
// the polygon to assemble
Polygon *pNew = allocatePolygon();
// the intersection polygon (indeed it's an edge or it's empty)
Polygon *pIntersect = allocatePolygon();
// check if polygons lie inside or outside (or on the plane)
// for each vertex check where it is situated in regard to the plane
// three possibilities appear:
Plane::Side clipSide = keepNegative ? Plane::POSITIVE_SIDE : Plane::NEGATIVE_SIDE;
// - side is clipSide: vertex will be clipped
// - side is !clipSide: vertex will be untouched
// - side is NOSIDE: vertex will be untouched
Plane::Side *side = OGRE_ALLOC_T(Plane::Side, vertexCount, MEMCATEGORY_SCENE_CONTROL);
for ( size_t iVertex = 0; iVertex < vertexCount; ++iVertex )
{
side[ iVertex ] = pl.getSide( p.getVertex( iVertex ) );
}
// now we check the side combinations for the current and the next vertex
// four different combinations exist:
// - both points inside (or on the plane): keep the second (add it to the body)
// - both points outside: discard both (don't add them to the body)
// - first vertex is inside, second is outside: add the intersection point
// - first vertex is outside, second is inside: add the intersection point, then the second
for ( size_t iVertex = 0; iVertex < vertexCount; ++iVertex )
{
// determine the next vertex
size_t iNextVertex = ( iVertex + 1 ) % vertexCount;
const Vector3& vCurrent = p.getVertex( iVertex );
const Vector3& vNext = p.getVertex( iNextVertex );
// case 1: both points inside (store next)
if ( side[ iVertex ] != clipSide && // NEGATIVE or NONE
side[ iNextVertex ] != clipSide ) // NEGATIVE or NONE
{
// keep the second
pNew->insertVertex( vNext );
}
// case 3: inside -> outside (store intersection)
else if ( side[ iVertex ] != clipSide &&
side[ iNextVertex ] == clipSide )
{
// Do an intersection with the plane. We use a ray with a start point and a direction.
// The ray is forced to hit the plane with any option available (eigher current or next
// is the starting point)
// intersect from the outside vertex towards the inside one
Vector3 vDirection = vCurrent - vNext;
vDirection.normalise();
Ray ray( vNext, vDirection );
std::pair< bool, Real > intersect = ray.intersects( pl );
// store intersection
if ( intersect.first )
{
// convert distance to vector
Vector3 vIntersect = ray.getPoint( intersect.second );
// store intersection
pNew->insertVertex( vIntersect );
pIntersect->insertVertex( vIntersect );
}
}
// case 4: outside -> inside (store intersection, store next)
else if ( side[ iVertex ] == clipSide &&
side[ iNextVertex ] != clipSide )
{
// Do an intersection with the plane. We use a ray with a start point and a direction.
// The ray is forced to hit the plane with any option available (eigher current or next
// is the starting point)
// intersect from the outside vertex towards the inside one
Vector3 vDirection = vNext - vCurrent;
vDirection.normalise();
Ray ray( vCurrent, vDirection );
std::pair< bool, Real > intersect = ray.intersects( pl );
// store intersection
if ( intersect.first )
{
// convert distance to vector
Vector3 vIntersect = ray.getPoint( intersect.second );
// store intersection
pNew->insertVertex( vIntersect );
pIntersect->insertVertex( vIntersect );
}
pNew->insertVertex( vNext );
}
// else:
// case 2: both outside (do nothing)
}
// insert the polygon only, if at least three vertices are present
if ( pNew->getVertexCount() >= 3 )
{
// in case there are double vertices, remove them
pNew->removeDuplicates();
// in case there are still at least three vertices, insert the polygon
if ( pNew->getVertexCount() >= 3 )
{
this->insertPolygon( pNew );
}
else
{
// delete pNew because it's empty or invalid
freePolygon(pNew);
pNew = 0;
}
}
else
{
// delete pNew because it's empty or invalid
freePolygon(pNew);
pNew = 0;
}
// insert intersection polygon only, if there are two vertices present
if ( pIntersect->getVertexCount() == 2 )
{
intersectionEdges.insert( Polygon::Edge( pIntersect->getVertex( 0 ),
pIntersect->getVertex( 1 ) ) );
}
// delete intersection polygon
// vertices were copied (if there were any)
freePolygon(pIntersect);
pIntersect = 0;
// delete side info
OGRE_FREE(side, MEMCATEGORY_SCENE_CONTROL);
side = 0;
}
// if the polygon was partially clipped, close it
// at least three edges are needed for a polygon
if ( intersectionEdges.size() >= 3 )
{
Polygon *pClosing = allocatePolygon();
// Analyze the intersection list and insert the intersection points in ccw order
// Each point is twice in the list because of the fact that we have a convex body
// with convex polygons. All we have to do is order the edges (an even-odd pair)
// in a ccw order. The plane normal shows us the direction.
Polygon::EdgeMap::iterator it = intersectionEdges.begin();
// check the cross product of the first two edges
Vector3 vFirst = it->first;
Vector3 vSecond = it->second;
// remove inserted edge
intersectionEdges.erase( it );
Vector3 vNext;
// find mating edge
if (findAndEraseEdgePair(vSecond, intersectionEdges, vNext))
{
// detect the orientation
// the polygon must have the same normal direction as the plane and then n
Vector3 vCross = ( vFirst - vSecond ).crossProduct( vNext - vSecond );
bool frontside = ( pl.normal ).directionEquals( vCross, Degree( 1 ) );
// first inserted vertex
Vector3 firstVertex;
// currently inserted vertex
Vector3 currentVertex;
// direction equals -> front side (walk ccw)
if ( frontside )
{
// start with next as first vertex, then second, then first and continue with first to walk ccw
pClosing->insertVertex( vNext );
pClosing->insertVertex( vSecond );
pClosing->insertVertex( vFirst );
firstVertex = vNext;
currentVertex = vFirst;
#ifdef _DEBUG_INTERSECTION_LIST
std::cout << "Plane: n=" << pl.normal << ", d=" << pl.d << std::endl;
std::cout << "First inserted vertex: " << *next << std::endl;
std::cout << "Second inserted vertex: " << *vSecond << std::endl;
std::cout << "Third inserted vertex: " << *vFirst << std::endl;
#endif
}
// direction does not equal -> back side (walk cw)
else
{
// start with first as first vertex, then second, then next and continue with next to walk ccw
pClosing->insertVertex( vFirst );
pClosing->insertVertex( vSecond );
pClosing->insertVertex( vNext );
firstVertex = vFirst;
currentVertex = vNext;
#ifdef _DEBUG_INTERSECTION_LIST
std::cout << "Plane: n=" << pl.normal << ", d=" << pl.d << std::endl;
std::cout << "First inserted vertex: " << *vFirst << std::endl;
std::cout << "Second inserted vertex: " << *vSecond << std::endl;
std::cout << "Third inserted vertex: " << *next << std::endl;
#endif
}
// search mating edges that have a point in common
// continue this operation as long as edges are present
while ( !intersectionEdges.empty() )
{
if (findAndEraseEdgePair(currentVertex, intersectionEdges, vNext))
{
// insert only if it's not the last (which equals the first) vertex
if ( !intersectionEdges.empty() )
{
currentVertex = vNext;
pClosing->insertVertex( vNext );
}
}
else
{
// degenerated...
break;
}
} // while intersectionEdges not empty
// insert polygon (may be degenerated!)
this->insertPolygon( pClosing );
}
// mating intersection edge NOT found!
else
{
freePolygon(pClosing);
}
} // if intersectionEdges contains more than three elements
}
//-----------------------------------------------------------------------
void AtlasImageTool::process (void)
{
Ogre::Root root("", "", "atlas.log");
Ogre::ResourceGroupManager::getSingleton().addResourceLocation(mImagePath, "FileSystem");
Ogre::StringVector::iterator itInputFileName;
Ogre::StringVector::iterator itFrame;
Ogre::StringVector::iterator itAlpha;
itAlpha = mAlpha.begin();
if (mInputFrames.empty() || mInputFrames[0] == Ogre::StringUtil::BLANK)
{
// No Frames are assigned so just add them
for (itInputFileName = mInputFileNames.begin(); itInputFileName != mInputFileNames.end(); ++itInputFileName)
{
Ogre::String imageFileName = *itInputFileName;
Ogre::Image image;
image.load(imageFileName, "General");
if (itAlpha != mAlpha.end() && *itAlpha != Ogre::StringUtil::BLANK)
{
Ogre::Real alpha = Ogre::StringConverter::parseReal(*itAlpha);
correctAlpha(image, alpha);
itAlpha++;
}
mAtlasImage.addImage(&image);
}
}
else
{
// Frames are assigned, so generate intermediate images
itInputFileName = mInputFileNames.begin();
Ogre::Real alpha = 1.0f;
Ogre::String nextImageFileName = *itInputFileName;
Ogre::Image nextImage;
itFrame = mInputFrames.begin();
size_t nextFrame = Ogre::StringConverter::parseUnsignedInt(*itFrame);
nextImage.load(nextImageFileName, "General");
size_t frameCounter = 0;
if (!mAlpha.empty() && mAlpha[0] != Ogre::StringUtil::BLANK)
{
itAlpha = mAlpha.begin();
Ogre::Real alpha = Ogre::StringConverter::parseReal(*itAlpha);
correctAlpha(nextImage, alpha);
itAlpha++;
}
mAtlasImage.addImage(&nextImage);
frameCounter++;
itInputFileName++;
itFrame++;
while (itInputFileName != mInputFileNames.end())
{
// Get the next filename
Ogre::Image firstImage(nextImage);
nextImageFileName = *itInputFileName;
nextImage.load(nextImageFileName, "General");
if (itAlpha != mAlpha.end() && *itAlpha != Ogre::StringUtil::BLANK)
{
Ogre::Real alpha = Ogre::StringConverter::parseReal(*itAlpha);
correctAlpha(nextImage, alpha);
itAlpha++;
}
if (itFrame != mInputFrames.end())
{
size_t firstFrame = nextFrame;
nextFrame = Ogre::StringConverter::parseUnsignedInt(*itFrame);
itFrame++;
frameCounter++;
// Generate and add interpolated images to the atlas image
size_t numberOfFrames = nextFrame - firstFrame;
for (size_t i = 1; i < numberOfFrames; ++i)
{
Ogre::Real fraction = (Ogre::Real)i / (Ogre::Real)numberOfFrames;
Ogre::Image interpolatedImage;
size_t pixelSize = Ogre::PixelUtil::getNumElemBytes(firstImage.getFormat());
size_t bufferSize = firstImage.getWidth() * firstImage.getHeight() * pixelSize;
Ogre::uchar* data = OGRE_ALLOC_T(Ogre::uchar, bufferSize, Ogre::MEMCATEGORY_GENERAL);
interpolatedImage.loadDynamicImage(data, firstImage.getWidth(), firstImage.getHeight(), 1, firstImage.getFormat(), true);
interpolate (interpolatedImage, firstImage, nextImage, fraction);
mAtlasImage.addImage(&interpolatedImage);
frameCounter++;
}
}
mAtlasImage.addImage(&nextImage);
frameCounter++;
itInputFileName++;
}
}
mAtlasImage._compile();
mAtlasImage.save(mImagePath + "//" + mOutputImage);
}
void
MaterialPreviewDialog::buildPreviewBitmap( const Ogre::String &texName )
{
const Ogre::uchar BytePerPixel = 8;
// 读取原始image
Ogre::Image *oriImage = getPreviewImage(texName);
// 源大纹理的大小
size_t oriImageHeight = oriImage->getHeight();
size_t oriImageWidth = oriImage->getWidth();
Ogre::uchar *oriImageData = oriImage->getData();
// 分配一个足够大的空间来保存新建的image的数据
size_t newImagegetRowSpan = oriImageWidth*oriImage->getBPP()/BytePerPixel; // 新建的image的行宽（单位为字节）
Ogre::uchar *newImageData = OGRE_ALLOC_T(Ogre::uchar, oriImageHeight*newImagegetRowSpan, Ogre::MEMCATEGORY_GENERAL);//new Ogre::uchar[oriImageHeight*newImagegetRowSpan];
Ogre::uchar *newImageDataPointer = newImageData;
Ogre::uchar *oriImagedataPointer = oriImageData;
// 把所选的纹理的数据提取出来，并创建一个新的image
for ( Ogre::uint i=0; i<oriImageHeight; ++i )
{
memcpy(newImageDataPointer, oriImagedataPointer, newImagegetRowSpan);
newImageDataPointer += newImagegetRowSpan;
oriImagedataPointer += oriImage->getRowSpan();
}
Ogre::Image newImage;
newImage.loadDynamicImage(newImageData,oriImageWidth,oriImageHeight,1,oriImage->getFormat(),true);
// 如果所选纹理大于64*64，就先resize
if ( oriImageWidth > mPreviewImageWidth || oriImageHeight > mPreviewImageHeight )
newImage.resize(mPreviewImageWidth, mPreviewImageHeight);
// 如果有alpha，要与黑白图进行混合
if ( newImage.getHasAlpha() )
{
Ogre::ColourValue col;
for ( int i=0; i<mPreviewImageWidth; ++i )
{
for ( int j=0; j<mPreviewImageWidth; ++j )
{
col = newImage.getColourAt(j,i,0);
float alphaValue = col.a;
unsigned char r = col.r*255 * alphaValue;
unsigned char g = col.g*255 * alphaValue;
unsigned char b = col.b*255 * alphaValue;
// 设置到image中
mCurrentPreviewImage.SetRGB(j,i,r,g,b);
}
}
}
// 没有alpha，就直接拷贝数据
else
{
Ogre::ColourValue col;
for ( int i=0; i<mPreviewImageWidth; ++i )
{
for ( int j=0; j<mPreviewImageWidth; ++j )
{
col = newImage.getColourAt(j,i,0);
unsigned char r = col.r*255;
unsigned char g = col.g*255;
unsigned char b = col.b*255;
// 设置到image中
mCurrentPreviewImage.SetRGB(j,i,r,g,b);
}
}
}
}
void
BrushSelector::buildPreviewBitmap( const Fairy::TextureInfo texInfo )
{
const Ogre::uchar BytePerPixel = 8;
// 读取原始image
Ogre::Image *oriImage = GetSceneManipulator()->getPreviewImage(texInfo.ownerTextureName);
// 源大纹理的大小
size_t oriImageHeight = oriImage->getHeight();
size_t oriImageWidth = oriImage->getWidth();
Ogre::uchar *oriImageData = oriImage->getData();
// 所选纹理的大小
size_t newImageWidth = texInfo.width*TexTileSize;
size_t newImageHeight = texInfo.height*TexTileSize;
// 分配一个足够大的空间来保存新建的image的数据
size_t newImagegetRowSpan = newImageWidth*oriImage->getBPP()/BytePerPixel; // 新建的image的行宽（单位为字节）
Ogre::uchar *newImageData = OGRE_ALLOC_T(Ogre::uchar, oriImageHeight*newImagegetRowSpan, Ogre::MEMCATEGORY_GENERAL);//new Ogre::uchar[newImageHeight*newImagegetRowSpan];
Ogre::uchar *newImageDataPointer = newImageData;
// 得知起始像素点
size_t startPoint = ( oriImageWidth * texInfo.topCorner + texInfo.leftCorner )
* TexTileSize * oriImage->getBPP()/BytePerPixel;
Ogre::uchar *oriImagedataPointer = oriImageData + startPoint;
// 把所选的纹理的数据提取出来，并创建一个新的image
for ( Ogre::uint i=0; i<newImageHeight; ++i )
{
memcpy(newImageDataPointer, oriImagedataPointer, newImagegetRowSpan);
newImageDataPointer += newImagegetRowSpan;
oriImagedataPointer += oriImage->getRowSpan();
}
Ogre::Image newImage;
newImage.loadDynamicImage(newImageData,newImageWidth,newImageHeight,1,oriImage->getFormat(),true);
// 如果所选纹理大于64*64，就先resize
if ( texInfo.width > 1 || texInfo.height > 1 )
newImage.resize(mPreviewImageWidth, mPreviewImageHeight);
// 如果有alpha，要与黑白图进行混合
if ( newImage.getHasAlpha() )
{
Ogre::ColourValue col;
for ( int i=0; i<mPreviewImageWidth; ++i )
{
for ( int j=0; j<mPreviewImageWidth; ++j )
{
col = newImage.getColourAt(j,i,0);
float alphaValue = col.a;
unsigned char r = col.r*255 * alphaValue + mBlackWhitePreviewImage.GetRed(i,j) * ( 1.0f - alphaValue);
unsigned char g = col.g*255 * alphaValue + mBlackWhitePreviewImage.GetGreen(i,j) * ( 1.0f - alphaValue);
unsigned char b = col.b*255 * alphaValue + mBlackWhitePreviewImage.GetBlue(i,j) * ( 1.0f - alphaValue);
// 设置到image中
mCurrentPreviewImage.SetRGB(j,i,r,g,b);
}
}
// 设置到缩略图控件中
mBrushesPreview->SetBitmap(mCurrentPreviewImage);
}
// 没有alpha，就直接拷贝数据
else
{
Ogre::ColourValue col;
for ( int i=0; i<mPreviewImageWidth; ++i )
{
for ( int j=0; j<mPreviewImageWidth; ++j )
{
col = newImage.getColourAt(j,i,0);
unsigned char r = col.r*255;
unsigned char g = col.g*255;
unsigned char b = col.b*255;
// 设置到image中
mCurrentPreviewImage.SetRGB(j,i,r,g,b);
}
}
mBrushesPreview->SetBitmap(mCurrentPreviewImage);
}
}
//-------------------------------------------------------------------------
void HeightmapTerrainPageSource::requestPage(ushort x, ushort y)
{
// Only 1 page provided
if (x == 0 && y == 0 && !mPage)
{
// Convert the image data to unscaled floats
ulong totalPageSize = mPageSize * mPageSize;
Real *heightData = OGRE_ALLOC_T(Real, totalPageSize, MEMCATEGORY_RESOURCE);
const uchar* pOrigSrc, *pSrc;
Real* pDest = heightData;
Real invScale;
bool is16bit = false;
if (mIsRaw)
{
pOrigSrc = mRawData->getPtr();
is16bit = (mRawBpp == 2);
}
else
{
PixelFormat pf = mImage.getFormat();
if (pf != PF_L8 && pf != PF_L16)
{
OGRE_EXCEPT( Exception::ERR_INVALIDPARAMS,
"Error: Image is not a grayscale image.",
"HeightmapTerrainPageSource::requestPage" );
}
pOrigSrc = mImage.getData();
is16bit = (pf == PF_L16);
}
// Determine mapping from fixed to floating
ulong rowSize;
if ( is16bit )
{
invScale = 1.0f / 65535.0f;
rowSize = mPageSize * 2;
}
else
{
invScale = 1.0f / 255.0f;
rowSize = mPageSize;
}
// Read the data
pSrc = pOrigSrc;
for (ulong j = 0; j < mPageSize; ++j)
{
if (mFlipTerrain)
{
// Work backwards
pSrc = pOrigSrc + (rowSize * (mPageSize - j - 1));
}
for (ulong i = 0; i < mPageSize; ++i)
{
if (is16bit)
{
#if OGRE_ENDIAN == OGRE_ENDIAN_BIG
ushort val = *pSrc++ << 8;
val += *pSrc++;
#else
ushort val = *pSrc++;
val += *pSrc++ << 8;
#endif
*pDest++ = Real(val) * invScale;
}
else
{
*pDest++ = Real(*pSrc++) * invScale;
}
}
}
// Call listeners
firePageConstructed(0, 0, heightData);
// Now turn into TerrainPage
// Note that we're using a single material for now
if (mSceneManager)
{
mPage = buildPage(heightData,
mSceneManager->getOptions().terrainMaterial);
mSceneManager->attachPage(0, 0, mPage);
}
// Free temp store
OGRE_FREE(heightData, MEMCATEGORY_RESOURCE);
}
}
//-----------------------------------------------------------------------
bool BspRaySceneQuery::processLeaf(const BspNode* leaf, const Ray& tracingRay,
RaySceneQueryListener* listener, Real maxDistance, Real traceDistance)
{
const BspNode::IntersectingObjectSet& objects = leaf->getObjects();
BspNode::IntersectingObjectSet::const_iterator i, iend;
iend = objects.end();
//Check ray against objects
for(i = objects.begin(); i != iend; ++i)
{
// cast away constness, constness of node is nothing to do with objects
MovableObject* obj = const_cast<MovableObject*>(*i);
// Skip this object if not enabled
if(!(obj->getQueryFlags() & mQueryMask) ||
!((obj->getTypeFlags() & mQueryTypeMask)))
continue;
// check we haven't reported this one already
// (objects can be intersecting more than one node)
if (mObjsThisQuery.find(obj) != mObjsThisQuery.end())
continue;
//Test object as bounding box
std::pair<bool, Real> result =
tracingRay.intersects(obj->getWorldBoundingBox());
// if the result came back positive and intersection point is inside
// the node, fire the event handler
if(result.first && result.second <= maxDistance)
{
if (!listener->queryResult(obj, result.second + traceDistance))
return false;
}
}
// Check ray against brushes
if (mQueryTypeMask & SceneManager::WORLD_GEOMETRY_TYPE_MASK)
{
const BspNode::NodeBrushList& brushList = leaf->getSolidBrushes();
BspNode::NodeBrushList::const_iterator bi, biend;
biend = brushList.end();
bool intersectedBrush = false;
for (bi = brushList.begin(); bi != biend; ++bi)
{
BspNode::Brush* brush = *bi;
std::pair<bool, Real> result = Math::intersects(tracingRay, brush->planes, true);
// if the result came back positive and intersection point is inside
// the node, check if this brush is closer
if(result.first && result.second <= maxDistance)
{
intersectedBrush = true;
if(mWorldFragmentType == SceneQuery::WFT_SINGLE_INTERSECTION)
{
// We're interested in a single intersection
// Have to create these
SceneQuery::WorldFragment* wf = OGRE_ALLOC_T(SceneQuery::WorldFragment, 1, MEMCATEGORY_SCENE_CONTROL);
wf->fragmentType = SceneQuery::WFT_SINGLE_INTERSECTION;
wf->singleIntersection = tracingRay.getPoint(result.second);
// save this so we can clean up later
mSingleIntersections.push_back(wf);
if (!listener->queryResult(wf, result.second + traceDistance))
return false;
}
else if (mWorldFragmentType == SceneQuery::WFT_PLANE_BOUNDED_REGION)
{
// We want the whole bounded volume
assert((*bi)->fragment.fragmentType == SceneQuery::WFT_PLANE_BOUNDED_REGION);
if (!listener->queryResult(const_cast<WorldFragment*>(&(brush->fragment)),
result.second + traceDistance))
return false;
}
}
}
if (intersectedBrush)
{
return false; // stop here
}
}
return true;
}
void createTerrainLightmap(const TerrainInfo& info, Image& image,
size_t width, size_t height, Vector3 lightDir, const ColourValue& lightCol,
const ColourValue& ambient, bool shadowed)
{
lightDir.normalise();
// calculate lightmap by multiplying light dir with terrain normals
// calculate the step size to use
AxisAlignedBox extents = info.getExtents();
Vector3 startPos = extents.getMinimum();
Vector3 step = extents.getMaximum() - extents.getMinimum();
step.x /= width;
step.z /= height;
Vector3 pos = startPos;
#if OGRE_VERSION_MINOR > 4
// Ogre::Image uses the memory allocation macros internally in Shoggoth,
// so we must use them as well.
uchar* lightMap = OGRE_ALLOC_T(uchar, width*height*3, MEMCATEGORY_GENERAL);
#else
uchar* lightMap = new uchar[width*height * 3];
#endif
memset(lightMap, 255, width*height*3);
for (size_t z = 0; z < height; ++z)
{
for (size_t x = 0; x < width; ++x)
{
size_t index = (z * width + x)*3;
// calculate diffuse light from light source
Vector3 norm = info.getNormalAt(pos.x, pos.z);
float l = std::max(0.0f, -lightDir.dotProduct(norm));
ColourValue v = ambient;
v.r = std::min(1.0f, v.r+l*lightCol.r);
v.g = std::min(1.0f, v.g+l*lightCol.g);
v.b = std::min(1.0f, v.b+l*lightCol.b);
lightMap[index+0] = (uchar) (255*v.r);
lightMap[index+1] = (uchar) (255*v.g);
lightMap[index+2] = (uchar) (255*v.b);
pos.x += step.x;
}
pos.x = startPos.x;
pos.z += step.z;
}
if (shadowed && (lightDir.x != 0 || lightDir.z != 0))
{
// add terrain shadows
Impl::addTerrainShadowsToLightmap(lightMap, info, width, height, lightDir, ambient);
}
// use a box filter to smoothen the lightmap
Impl::boxFilterLightmap(lightMap, width, height);
// save lightmap to image
image.loadDynamicImage(lightMap, width, height, 1, PF_BYTE_RGB, true);
// ownership of lightMap was transfered to image, don't need to delete
}
//-----------------------------------------------------------------------------
Image & Image::flipAroundY()
{
if( !mBuffer )
{
OGRE_EXCEPT(
Exception::ERR_INTERNAL_ERROR,
"Can not flip an uninitialised texture",
"Image::flipAroundY" );
}
mNumMipmaps = 0; // Image operations lose precomputed mipmaps
uchar *pTempBuffer1 = NULL;
ushort *pTempBuffer2 = NULL;
uchar *pTempBuffer3 = NULL;
uint *pTempBuffer4 = NULL;
uchar *src1 = mBuffer;
ushort *src2 = (ushort *)mBuffer;
uchar *src3 = mBuffer;
uint *src4 = (uint *)mBuffer;
ushort y;
switch (mPixelSize)
{
case 1:
pTempBuffer1 = OGRE_ALLOC_T(uchar, mWidth * mHeight, MEMCATEGORY_GENERAL);
for (y = 0; y < mHeight; y++)
{
uchar *dst1 = (pTempBuffer1 + ((y * mWidth) + mWidth - 1));
for (ushort x = 0; x < mWidth; x++)
memcpy(dst1--, src1++, sizeof(uchar));
}
memcpy(mBuffer, pTempBuffer1, mWidth * mHeight * sizeof(uchar));
OGRE_FREE(pTempBuffer1, MEMCATEGORY_GENERAL);
break;
case 2:
pTempBuffer2 = OGRE_ALLOC_T(ushort, mWidth * mHeight, MEMCATEGORY_GENERAL);
for (y = 0; y < mHeight; y++)
{
ushort *dst2 = (pTempBuffer2 + ((y * mWidth) + mWidth - 1));
for (ushort x = 0; x < mWidth; x++)
memcpy(dst2--, src2++, sizeof(ushort));
}
memcpy(mBuffer, pTempBuffer2, mWidth * mHeight * sizeof(ushort));
OGRE_FREE(pTempBuffer2, MEMCATEGORY_GENERAL);
break;
case 3:
pTempBuffer3 = OGRE_ALLOC_T(uchar, mWidth * mHeight * 3, MEMCATEGORY_GENERAL);
for (y = 0; y < mHeight; y++)
{
size_t offset = ((y * mWidth) + (mWidth - 1)) * 3;
uchar *dst3 = pTempBuffer3;
dst3 += offset;
for (size_t x = 0; x < mWidth; x++)
{
memcpy(dst3, src3, sizeof(uchar) * 3);
dst3 -= 3; src3 += 3;
}
}
memcpy(mBuffer, pTempBuffer3, mWidth * mHeight * sizeof(uchar) * 3);
OGRE_FREE(pTempBuffer3, MEMCATEGORY_GENERAL);
break;
case 4:
pTempBuffer4 = OGRE_ALLOC_T(uint, mWidth * mHeight, MEMCATEGORY_GENERAL);
for (y = 0; y < mHeight; y++)
{
uint *dst4 = (pTempBuffer4 + ((y * mWidth) + mWidth - 1));
for (ushort x = 0; x < mWidth; x++)
memcpy(dst4--, src4++, sizeof(uint));
}
memcpy(mBuffer, pTempBuffer4, mWidth * mHeight * sizeof(uint));
OGRE_FREE(pTempBuffer4, MEMCATEGORY_GENERAL);
break;
default:
OGRE_EXCEPT(
Exception::ERR_INTERNAL_ERROR,
"Unknown pixel depth",
"Image::flipAroundY" );
break;
}
return *this;
}
//---------------------------------------------------------------------
void DeflateStream::init()
{
mZStream = OGRE_ALLOC_T(z_stream, 1, MEMCATEGORY_GENERAL);
mZStream->zalloc = OgreZalloc;
mZStream->zfree = OgreZfree;
if (getAccessMode() == READ)
{
mTmp = (unsigned char*)OGRE_MALLOC(OGRE_DEFLATE_TMP_SIZE, MEMCATEGORY_GENERAL);
size_t restorePoint = mCompressedStream->tell();
// read early chunk
mZStream->next_in = mTmp;
mZStream->avail_in = static_cast<uint>(mCompressedStream->read(mTmp, getAvailInForSinglePass()));
if (inflateInit(mZStream) != Z_OK)
{
mIsCompressedValid = false;
}
else
mIsCompressedValid = true;
if (mIsCompressedValid)
{
// in fact, inflateInit on some implementations doesn't try to read
// anything. We need to at least read something to test
Bytef testOut[4];
size_t savedIn = mZStream->avail_in;
mZStream->avail_out = 4;
mZStream->next_out = testOut;
if (inflate(mZStream, Z_SYNC_FLUSH) != Z_OK)
mIsCompressedValid = false;
// restore for reading
mZStream->avail_in = static_cast<uint>(savedIn);
mZStream->next_in = mTmp;
inflateReset(mZStream);
}
if (!mIsCompressedValid)
{
// Not compressed data!
// Fail gracefully, fall back on reading the underlying stream direct
destroy();
mCompressedStream->seek(restorePoint);
}
}
else
{
if(mTempFileName.empty())
{
// Write to temp file
#if OGRE_PLATFORM == OGRE_PLATFORM_WIN32 || OGRE_PLATFORM == OGRE_PLATFORM_WINRT
char* tmpname = _tempnam(".", "ogre");
if (!tmpname)
{
// Having no file name here will cause various problems later.
OGRE_EXCEPT(Exception::ERR_INTERNAL_ERROR, "Temporary file name generation failed.", "DeflateStream::init");
}
else
{
mTempFileName = tmpname;
free(tmpname);
}
#elif OGRE_PLATFORM == OGRE_PLATFORM_APPLE_IOS || OGRE_PLATFORM == OGRE_PLATFORM_APPLE
mTempFileName = macTempFileName();
#else
char tmpname[] = "/tmp/ogreXXXXXX";
if (mkstemp(tmpname) == -1)
OGRE_EXCEPT(Exception::ERR_INTERNAL_ERROR, "Temporary file name generation failed.", "DeflateStream::init");
mTempFileName = tmpname;
#endif
}
std::fstream *f = OGRE_NEW_T(std::fstream, MEMCATEGORY_GENERAL)();
f->open(mTempFileName.c_str(), std::ios::binary | std::ios::out);
mTmpWriteStream = DataStreamPtr(OGRE_NEW FileStreamDataStream(f));
}
}
//---------------------------------------------------------------------
FIBITMAP* FreeImageCodec::encode(MemoryDataStreamPtr& input, CodecDataPtr& pData) const
{
// Set error handler
FreeImage_SetOutputMessage(FreeImageSaveErrorHandler);
FIBITMAP* ret = 0;
ImageData* pImgData = static_cast< ImageData * >( pData.getPointer() );
PixelBox src(pImgData->width, pImgData->height, pImgData->depth, pImgData->format, input->getPtr());
// The required format, which will adjust to the format
// actually supported by FreeImage.
PixelFormat requiredFormat = pImgData->format;
// determine the settings
FREE_IMAGE_TYPE imageType;
PixelFormat determiningFormat = pImgData->format;
switch(determiningFormat)
{
case PF_R5G6B5:
case PF_B5G6R5:
case PF_R8G8B8:
case PF_B8G8R8:
case PF_A8R8G8B8:
case PF_X8R8G8B8:
case PF_A8B8G8R8:
case PF_X8B8G8R8:
case PF_B8G8R8A8:
case PF_R8G8B8A8:
case PF_A4L4:
case PF_BYTE_LA:
case PF_R3G3B2:
case PF_A4R4G4B4:
case PF_A1R5G5B5:
case PF_A2R10G10B10:
case PF_A2B10G10R10:
// I'd like to be able to use r/g/b masks to get FreeImage to load the data
// in it's existing format, but that doesn't work, FreeImage needs to have
// data in RGB[A] (big endian) and BGR[A] (little endian), always.
if (PixelUtil::hasAlpha(determiningFormat))
{
#if FREEIMAGE_COLORORDER == FREEIMAGE_COLORORDER_RGB
requiredFormat = PF_BYTE_RGBA;
#else
requiredFormat = PF_BYTE_BGRA;
#endif
}
else
{
#if FREEIMAGE_COLORORDER == FREEIMAGE_COLORORDER_RGB
requiredFormat = PF_BYTE_RGB;
#else
requiredFormat = PF_BYTE_BGR;
#endif
}
// fall through
case PF_L8:
case PF_A8:
imageType = FIT_BITMAP;
break;
case PF_L16:
imageType = FIT_UINT16;
break;
case PF_SHORT_GR:
requiredFormat = PF_SHORT_RGB;
// fall through
case PF_SHORT_RGB:
imageType = FIT_RGB16;
break;
case PF_SHORT_RGBA:
imageType = FIT_RGBA16;
break;
case PF_FLOAT16_R:
requiredFormat = PF_FLOAT32_R;
// fall through
case PF_FLOAT32_R:
imageType = FIT_FLOAT;
break;
case PF_FLOAT16_GR:
case PF_FLOAT16_RGB:
case PF_FLOAT32_GR:
requiredFormat = PF_FLOAT32_RGB;
// fall through
case PF_FLOAT32_RGB:
imageType = FIT_RGBF;
break;
case PF_FLOAT16_RGBA:
requiredFormat = PF_FLOAT32_RGBA;
// fall through
case PF_FLOAT32_RGBA:
imageType = FIT_RGBAF;
break;
default:
OGRE_EXCEPT(Exception::ERR_ITEM_NOT_FOUND, "Invalid image format", "FreeImageCodec::encode");
};
// Check support for this image type & bit depth
if (!FreeImage_FIFSupportsExportType((FREE_IMAGE_FORMAT)mFreeImageType, imageType) ||
!FreeImage_FIFSupportsExportBPP((FREE_IMAGE_FORMAT)mFreeImageType, (int)PixelUtil::getNumElemBits(requiredFormat)))
{
// Ok, need to allocate a fallback
// Only deal with RGBA -> RGB for now
switch (requiredFormat)
{
case PF_BYTE_RGBA:
requiredFormat = PF_BYTE_RGB;
break;
case PF_BYTE_BGRA:
requiredFormat = PF_BYTE_BGR;
break;
default:
break;
};
}
bool conversionRequired = false;
unsigned char* srcData = input->getPtr();
// Check BPP
unsigned bpp = static_cast<unsigned>(PixelUtil::getNumElemBits(requiredFormat));
if (!FreeImage_FIFSupportsExportBPP((FREE_IMAGE_FORMAT)mFreeImageType, (int)bpp))
{
if (bpp == 32 && PixelUtil::hasAlpha(pImgData->format) && FreeImage_FIFSupportsExportBPP((FREE_IMAGE_FORMAT)mFreeImageType, 24))
{
// drop to 24 bit (lose alpha)
#if FREEIMAGE_COLORORDER == FREEIMAGE_COLORORDER_RGB
requiredFormat = PF_BYTE_RGB;
#else
requiredFormat = PF_BYTE_BGR;
#endif
bpp = 24;
}
else if (bpp == 128 && PixelUtil::hasAlpha(pImgData->format) && FreeImage_FIFSupportsExportBPP((FREE_IMAGE_FORMAT)mFreeImageType, 96))
{
// drop to 96-bit floating point
requiredFormat = PF_FLOAT32_RGB;
}
}
PixelBox convBox(pImgData->width, pImgData->height, 1, requiredFormat);
if (requiredFormat != pImgData->format)
{
conversionRequired = true;
// Allocate memory
convBox.data = OGRE_ALLOC_T(uchar, convBox.getConsecutiveSize(), MEMCATEGORY_GENERAL);
// perform conversion and reassign source
PixelBox src(pImgData->width, pImgData->height, 1, pImgData->format, input->getPtr());
PixelUtil::bulkPixelConversion(src, convBox);
srcData = static_cast<unsigned char*>(convBox.data);
}
ret = FreeImage_AllocateT(
imageType,
static_cast<int>(pImgData->width),
static_cast<int>(pImgData->height),
bpp);
if (!ret)
{
if (conversionRequired)
OGRE_FREE(convBox.data, MEMCATEGORY_GENERAL);
OGRE_EXCEPT(Exception::ERR_INVALIDPARAMS,
"FreeImage_AllocateT failed - possibly out of memory. ",
__FUNCTION__);
}
if (requiredFormat == PF_L8 || requiredFormat == PF_A8)
{
// Must explicitly tell FreeImage that this is greyscale by setting
// a "grey" palette (otherwise it will save as a normal RGB
// palettized image).
FIBITMAP *tmp = FreeImage_ConvertToGreyscale(ret);
FreeImage_Unload(ret);
ret = tmp;
}
size_t dstPitch = FreeImage_GetPitch(ret);
size_t srcPitch = pImgData->width * PixelUtil::getNumElemBytes(requiredFormat);
// Copy data, invert scanlines and respect FreeImage pitch
uchar* pSrc;
uchar* pDst = FreeImage_GetBits(ret);
for (size_t y = 0; y < pImgData->height; ++y)
{
pSrc = srcData + (pImgData->height - y - 1) * srcPitch;
memcpy(pDst, pSrc, srcPitch);
pDst += dstPitch;
}
if (conversionRequired)
{
// delete temporary conversion area
OGRE_FREE(convBox.data, MEMCATEGORY_GENERAL);
}
return ret;
}
