static int bind_in_place(orte_job_t *jdata,
hwloc_obj_type_t target,
unsigned cache_level)
{
/* traverse the hwloc topology tree on each node downwards
* until we find an unused object of type target - and then bind
* the process to that target
*/
int i, j;
orte_job_map_t *map;
orte_node_t *node;
orte_proc_t *proc;
hwloc_cpuset_t cpus;
unsigned int idx, ncpus;
struct hwloc_topology_support *support;
opal_hwloc_obj_data_t *data;
opal_output_verbose(5, orte_rmaps_base_framework.framework_output,
"mca:rmaps: bind in place for job %s with bindings %s",
ORTE_JOBID_PRINT(jdata->jobid),
opal_hwloc_base_print_binding(jdata->map->binding));
/* initialize */
map = jdata->map;
for (i=0; i < map->nodes->size; i++) {
if (NULL == (node = (orte_node_t*)opal_pointer_array_get_item(map->nodes, i))) {
continue;
}
if (!orte_do_not_launch) {
/* if we don't want to launch, then we are just testing the system,
* so ignore questions about support capabilities
*/
support = (struct hwloc_topology_support*)hwloc_topology_get_support(node->topology);
/* check if topology supports cpubind - have to be careful here
* as Linux doesn't currently support thread-level binding. This
* may change in the future, though, and it isn't clear how hwloc
* interprets the current behavior. So check both flags to be sure.
*/
if (!support->cpubind->set_thisproc_cpubind &&
!support->cpubind->set_thisthread_cpubind) {
if (!OPAL_BINDING_REQUIRED(map->binding) ||
!OPAL_BINDING_POLICY_IS_SET(map->binding)) {
/* we are not required to bind, so ignore this */
continue;
}
orte_show_help("help-orte-rmaps-base.txt", "rmaps:cpubind-not-supported", true, node->name);
return ORTE_ERR_SILENT;
}
/* check if topology supports membind - have to be careful here
* as hwloc treats this differently than I (at least) would have
* expected. Per hwloc, Linux memory binding is at the thread,
* and not process, level. Thus, hwloc sets the "thisproc" flag
* to "false" on all Linux systems, and uses the "thisthread" flag
* to indicate binding capability - don't warn if the user didn't
* specifically request binding
*/
if (!support->membind->set_thisproc_membind &&
!support->membind->set_thisthread_membind &&
OPAL_BINDING_POLICY_IS_SET(map->binding)) {
if (OPAL_HWLOC_BASE_MBFA_WARN == opal_hwloc_base_mbfa && !membind_warned) {
orte_show_help("help-orte-rmaps-base.txt", "rmaps:membind-not-supported", true, node->name);
membind_warned = true;
} else if (OPAL_HWLOC_BASE_MBFA_ERROR == opal_hwloc_base_mbfa) {
orte_show_help("help-orte-rmaps-base.txt", "rmaps:membind-not-supported-fatal", true, node->name);
return ORTE_ERR_SILENT;
}
}
}
/* some systems do not report cores, and so we can get a situation where our
* default binding policy will fail for no necessary reason. So if we are
* computing a binding due to our default policy, and no cores are found
* on this node, just silently skip it - we will not bind
*/
if (!OPAL_BINDING_POLICY_IS_SET(map->binding) &&
HWLOC_TYPE_DEPTH_UNKNOWN == hwloc_get_type_depth(node->topology, HWLOC_OBJ_CORE)) {
opal_output_verbose(5, orte_rmaps_base_framework.framework_output,
"Unable to bind-to core by default on node %s as no cores detected",
node->name);
continue;
}
/* we share topologies in order
* to save space, so we need to reset the usage info to reflect
* our own current state
*/
reset_usage(node, jdata->jobid);
/* cycle thru the procs */
for (j=0; j < node->procs->size; j++) {
if (NULL == (proc = (orte_proc_t*)opal_pointer_array_get_item(node->procs, j))) {
continue;
}
/* ignore procs from other jobs */
if (proc->name.jobid != jdata->jobid) {
continue;
}
/* ignore procs that have already been bound - should
* never happen, but safer
*/
if (NULL != proc->cpu_bitmap) {
continue;
}
/* get the index of this location */
if (UINT_MAX == (idx = opal_hwloc_base_get_obj_idx(node->topology, proc->locale, OPAL_HWLOC_AVAILABLE))) {
ORTE_ERROR_LOG(ORTE_ERR_BAD_PARAM);
return ORTE_ERR_SILENT;
}
/* track the number bound */
data = (opal_hwloc_obj_data_t*)proc->locale->userdata;
data->num_bound++;
opal_output_verbose(5, orte_rmaps_base_framework.framework_output,
"BINDING PROC %s TO %s NUMBER %u",
ORTE_NAME_PRINT(&proc->name),
hwloc_obj_type_string(proc->locale->type), idx);
/* get the number of cpus under this location */
if (0 == (ncpus = opal_hwloc_base_get_npus(node->topology, proc->locale))) {
orte_show_help("help-orte-rmaps-base.txt", "rmaps:no-available-cpus", true, node->name);
return ORTE_ERR_SILENT;
}
/* error out if adding a proc would cause overload and that wasn't allowed,
* and it wasn't a default binding policy (i.e., the user requested it)
*/
if (ncpus < data->num_bound &&
!OPAL_BIND_OVERLOAD_ALLOWED(jdata->map->binding) &&
OPAL_BINDING_POLICY_IS_SET(jdata->map->binding)) {
orte_show_help("help-orte-rmaps-base.txt", "rmaps:binding-overload", true,
opal_hwloc_base_print_binding(map->binding), node->name,
data->num_bound, ncpus);
return ORTE_ERR_SILENT;
}
/* bind the proc here */
cpus = opal_hwloc_base_get_available_cpus(node->topology, proc->locale);
hwloc_bitmap_list_asprintf(&proc->cpu_bitmap, cpus);
/* record the location */
proc->bind_location = proc->locale;
opal_output_verbose(5, orte_rmaps_base_framework.framework_output,
"%s BOUND PROC %s TO %s[%s:%u] on node %s",
ORTE_NAME_PRINT(ORTE_PROC_MY_NAME),
ORTE_NAME_PRINT(&proc->name),
proc->cpu_bitmap,
hwloc_obj_type_string(proc->locale->type),
idx, node->name);
}
}
return ORTE_SUCCESS;
}
static int bind_upwards(orte_job_t *jdata,
orte_node_t *node,
hwloc_obj_type_t target,
unsigned cache_level)
{
/* traverse the hwloc topology tree on each node upwards
* until we find an object of type target - and then bind
* the process to that target
*/
int j;
orte_job_map_t *map;
orte_proc_t *proc;
hwloc_obj_t obj;
hwloc_cpuset_t cpus;
unsigned int idx, ncpus;
opal_hwloc_obj_data_t *data;
opal_output_verbose(5, orte_rmaps_base_framework.framework_output,
"mca:rmaps: bind upwards for job %s with bindings %s",
ORTE_JOBID_PRINT(jdata->jobid),
opal_hwloc_base_print_binding(jdata->map->binding));
/* initialize */
map = jdata->map;
/* cycle thru the procs */
for (j=0; j < node->procs->size; j++) {
if (NULL == (proc = (orte_proc_t*)opal_pointer_array_get_item(node->procs, j))) {
continue;
}
/* ignore procs from other jobs */
if (proc->name.jobid != jdata->jobid) {
continue;
}
/* ignore procs that have already been bound - should
* never happen, but safer
*/
if (NULL != proc->cpu_bitmap) {
continue;
}
/* bozo check */
if (NULL == proc->locale) {
opal_output_verbose(5, orte_rmaps_base_framework.framework_output,
"BIND UPWARDS: LOCALE FOR PROC %s IS NULL",
ORTE_NAME_PRINT(&proc->name));
return ORTE_ERR_SILENT;
}
/* starting at the locale, move up thru the parents
* to find the target object type
*/
for (obj = proc->locale->parent; NULL != obj; obj = obj->parent) {
opal_output_verbose(5, orte_rmaps_base_framework.framework_output,
"%s bind:upward target %s type %s",
ORTE_NAME_PRINT(ORTE_PROC_MY_NAME),
hwloc_obj_type_string(target),
hwloc_obj_type_string(obj->type));
if (target == obj->type) {
if (HWLOC_OBJ_CACHE == target && cache_level != obj->attr->cache.depth) {
continue;
}
/* get its index */
if (UINT_MAX == (idx = opal_hwloc_base_get_obj_idx(node->topology, obj, OPAL_HWLOC_AVAILABLE))) {
ORTE_ERROR_LOG(ORTE_ERR_BAD_PARAM);
return ORTE_ERR_SILENT;
}
/* track the number bound */
data = (opal_hwloc_obj_data_t*)obj->userdata;
data->num_bound++;
/* get the number of cpus under this location */
if (0 == (ncpus = opal_hwloc_base_get_npus(node->topology, obj))) {
orte_show_help("help-orte-rmaps-base.txt", "rmaps:no-available-cpus", true, node->name);
return ORTE_ERR_SILENT;
}
/* error out if adding a proc would cause overload and that wasn't allowed,
* and it wasn't a default binding policy (i.e., the user requested it)
*/
if (ncpus < data->num_bound &&
!OPAL_BIND_OVERLOAD_ALLOWED(jdata->map->binding) &&
OPAL_BINDING_POLICY_IS_SET(jdata->map->binding)) {
orte_show_help("help-orte-rmaps-base.txt", "rmaps:binding-overload", true,
opal_hwloc_base_print_binding(map->binding), node->name,
data->num_bound, ncpus);
return ORTE_ERR_SILENT;
}
/* bind it here */
cpus = opal_hwloc_base_get_available_cpus(node->topology, obj);
hwloc_bitmap_list_asprintf(&proc->cpu_bitmap, cpus);
/* record the location */
proc->bind_location = obj;
opal_output_verbose(5, orte_rmaps_base_framework.framework_output,
"%s BOUND PROC %s TO %s[%s:%u] on node %s",
ORTE_NAME_PRINT(ORTE_PROC_MY_NAME),
ORTE_NAME_PRINT(&proc->name),
proc->cpu_bitmap,
hwloc_obj_type_string(target),
idx, node->name);
break;
}
}
if (NULL == proc->cpu_bitmap && OPAL_BINDING_REQUIRED(jdata->map->binding)) {
/* didn't find anyone to bind to - this is an error
* unless the user specified if-supported
*/
orte_show_help("help-orte-rmaps-base.txt", "rmaps:binding-target-not-found", true,
opal_hwloc_base_print_binding(map->binding), node->name);
return ORTE_ERR_SILENT;
}
}
return ORTE_SUCCESS;
}
static int bind_downwards(orte_job_t *jdata,
orte_node_t *node,
hwloc_obj_type_t target,
unsigned cache_level)
{
int j;
orte_job_map_t *map;
orte_proc_t *proc;
hwloc_obj_t trg_obj, nxt_obj;
hwloc_cpuset_t cpus;
unsigned int ncpus;
opal_hwloc_obj_data_t *data;
int total_cpus;
hwloc_cpuset_t totalcpuset;
opal_output_verbose(5, orte_rmaps_base_framework.framework_output,
"mca:rmaps: bind downward for job %s with bindings %s",
ORTE_JOBID_PRINT(jdata->jobid),
opal_hwloc_base_print_binding(jdata->map->binding));
/* initialize */
map = jdata->map;
totalcpuset = hwloc_bitmap_alloc();
/* cycle thru the procs */
for (j=0; j < node->procs->size; j++) {
if (NULL == (proc = (orte_proc_t*)opal_pointer_array_get_item(node->procs, j))) {
continue;
}
/* ignore procs from other jobs */
if (proc->name.jobid != jdata->jobid) {
continue;
}
/* ignore procs that have already been bound - should
* never happen, but safer
*/
if (NULL != proc->cpu_bitmap) {
continue;
}
/* we don't know if the target is a direct child of this locale,
* or if it is some depth below it, so we have to conduct a bit
* of a search. Let hwloc find the min usage one for us.
*/
trg_obj = opal_hwloc_base_find_min_bound_target_under_obj(node->topology,
proc->locale,
target, cache_level);
if (NULL == trg_obj) {
/* there aren't any such targets under this object */
orte_show_help("help-orte-rmaps-base.txt", "rmaps:no-available-cpus", true, node->name);
hwloc_bitmap_free(totalcpuset);
return ORTE_ERR_SILENT;
}
/* record the location */
proc->bind_location = trg_obj;
/* start with a clean slate */
hwloc_bitmap_zero(totalcpuset);
total_cpus = 0;
nxt_obj = trg_obj;
do {
if (NULL == nxt_obj) {
/* could not find enough cpus to meet request */
orte_show_help("help-orte-rmaps-base.txt", "rmaps:no-available-cpus", true, node->name);
hwloc_bitmap_free(totalcpuset);
return ORTE_ERR_SILENT;
}
trg_obj = nxt_obj;
/* get the number of cpus under this location */
ncpus = opal_hwloc_base_get_npus(node->topology, trg_obj);
opal_output_verbose(5, orte_rmaps_base_framework.framework_output,
"%s GOT %d CPUS",
ORTE_NAME_PRINT(ORTE_PROC_MY_NAME), ncpus);
/* track the number bound */
if (NULL == (data = (opal_hwloc_obj_data_t*)trg_obj->userdata)) {
data = OBJ_NEW(opal_hwloc_obj_data_t);
trg_obj->userdata = data;
}
data->num_bound++;
/* error out if adding a proc would cause overload and that wasn't allowed,
* and it wasn't a default binding policy (i.e., the user requested it)
*/
if (ncpus < data->num_bound &&
!OPAL_BIND_OVERLOAD_ALLOWED(jdata->map->binding)) {
if (OPAL_BINDING_POLICY_IS_SET(jdata->map->binding)) {
orte_show_help("help-orte-rmaps-base.txt", "rmaps:binding-overload", true,
opal_hwloc_base_print_binding(map->binding), node->name,
data->num_bound, ncpus);
hwloc_bitmap_free(totalcpuset);
return ORTE_ERR_SILENT;
} else {
/* if this is the default binding policy, then just don't
* bind this proc
*/
data->num_bound--; // maintain count
/* show the proc as not bound */
proc->bind_location = NULL;
hwloc_bitmap_zero(totalcpuset);
break;
}
}
/* bind the proc here */
cpus = opal_hwloc_base_get_available_cpus(node->topology, trg_obj);
hwloc_bitmap_or(totalcpuset, totalcpuset, cpus);
/* track total #cpus */
total_cpus += ncpus;
/* move to the next location, in case we need it */
nxt_obj = trg_obj->next_cousin;
} while (total_cpus < orte_rmaps_base.cpus_per_rank);
hwloc_bitmap_list_asprintf(&proc->cpu_bitmap, totalcpuset);
if (4 < opal_output_get_verbosity(orte_rmaps_base_framework.framework_output)) {
char tmp1[1024], tmp2[1024];
if (OPAL_ERR_NOT_BOUND == opal_hwloc_base_cset2str(tmp1, sizeof(tmp1),
node->topology, totalcpuset)) {
opal_output(orte_rmaps_base_framework.framework_output,
"%s PROC %s ON %s IS NOT BOUND",
ORTE_NAME_PRINT(ORTE_PROC_MY_NAME),
ORTE_NAME_PRINT(&proc->name), node->name);
} else {
opal_hwloc_base_cset2mapstr(tmp2, sizeof(tmp2), node->topology, totalcpuset);
opal_output(orte_rmaps_base_framework.framework_output,
"%s BOUND PROC %s[%s] TO %s: %s",
ORTE_NAME_PRINT(ORTE_PROC_MY_NAME),
ORTE_NAME_PRINT(&proc->name), node->name,
tmp1, tmp2);
}
}
}
hwloc_bitmap_free(totalcpuset);
return ORTE_SUCCESS;
}
int orte_rmaps_rr_byslot(orte_job_t *jdata,
orte_app_context_t *app,
opal_list_t *node_list,
orte_std_cntr_t num_slots,
orte_vpid_t num_procs)
{
int rc, i, nprocs_mapped;
orte_node_t *node;
orte_proc_t *proc;
int num_procs_to_assign, extra_procs_to_assign=0, nxtra_nodes=0;
#if OPAL_HAVE_HWLOC
hwloc_obj_t obj=NULL;
#endif
float balance;
bool add_one=false;
opal_output_verbose(2, orte_rmaps_base_framework.framework_output,
"mca:rmaps:rr: mapping by slot for job %s slots %d num_procs %lu",
ORTE_JOBID_PRINT(jdata->jobid), (int)num_slots, (unsigned long)num_procs);
/* check to see if we can map all the procs */
if (num_slots < ((int)app->num_procs * orte_rmaps_base.cpus_per_rank)) {
if (ORTE_MAPPING_NO_OVERSUBSCRIBE & ORTE_GET_MAPPING_DIRECTIVE(jdata->map->mapping)) {
orte_show_help("help-orte-rmaps-base.txt", "orte-rmaps-base:alloc-error",
true, app->num_procs, app->app);
return ORTE_ERR_SILENT;
}
#if OPAL_HAVE_HWLOC
/* if we will and are allowed to oversubscribe, and binding was given, then
* we really should warn the user that we cannot bind
*/
if (OPAL_BINDING_POLICY_IS_SET(jdata->map->binding)) {
if ((OPAL_BIND_TO_CORE == OPAL_GET_BINDING_POLICY(jdata->map->binding) ||
OPAL_BIND_TO_HWTHREAD == OPAL_GET_BINDING_POLICY(jdata->map->binding)) &&
!OPAL_BIND_OVERLOAD_ALLOWED(jdata->map->binding)) {
/* RHC: don't emit this warning at this time while we try to
* determine the best path forward. See
* https://svn.open-mpi.org/trac/ompi/ticket/4345
* for an explanation
orte_show_help("help-orte-rmaps-base.txt", "orte-rmaps-base:oversubscribed",
true, num_slots, app->num_procs * orte_rmaps_base.cpus_per_rank);
OPAL_SET_BINDING_POLICY(jdata->map->binding, OPAL_BIND_TO_NONE);
*/
}
} else {
/* don't default to bound */
OPAL_SET_BINDING_POLICY(jdata->map->binding, OPAL_BIND_TO_NONE);
}
#endif
}
/* first pass: map the number of procs to each node until we
* map all specified procs or use all allocated slots
*/
nprocs_mapped = 0;
OPAL_LIST_FOREACH(node, node_list, orte_node_t) {
opal_output_verbose(2, orte_rmaps_base_framework.framework_output,
"mca:rmaps:rr:slot working node %s",
node->name);
#if OPAL_HAVE_HWLOC
/* get the root object as we are not assigning
* locale here except at the node level
*/
if (NULL != node->topology) {
obj = hwloc_get_root_obj(node->topology);
}
#endif
if (node->slots <= node->slots_inuse) {
opal_output_verbose(2, orte_rmaps_base_framework.framework_output,
"mca:rmaps:rr:slot node %s is full - skipping",
node->name);
continue;
}
/* assign a number of procs equal to the number of available
* slots divided by the number of cpus/rank the user
* requested
*/
num_procs_to_assign = (node->slots - node->slots_inuse) / orte_rmaps_base.cpus_per_rank;
opal_output_verbose(2, orte_rmaps_base_framework.framework_output,
"mca:rmaps:rr:slot assigning %d procs to node %s",
(int)num_procs_to_assign, node->name);
for (i=0; i < num_procs_to_assign && nprocs_mapped < app->num_procs; i++) {
/* add this node to the map - do it only once */
if (!node->mapped) {
if (ORTE_SUCCESS > (rc = opal_pointer_array_add(jdata->map->nodes, (void*)node))) {
ORTE_ERROR_LOG(rc);
return rc;
}
node->mapped = true;
OBJ_RETAIN(node); /* maintain accounting on object */
++(jdata->map->num_nodes);
}
if (NULL == (proc = orte_rmaps_base_setup_proc(jdata, node, app->idx))) {
return ORTE_ERR_OUT_OF_RESOURCE;
}
nprocs_mapped++;
#if OPAL_HAVE_HWLOC
proc->locale = obj;
#endif
}
}
static int bind_in_place(orte_job_t *jdata,
hwloc_obj_type_t target,
unsigned cache_level)
{
/* traverse the hwloc topology tree on each node downwards
* until we find an unused object of type target - and then bind
* the process to that target
*/
int i, j;
orte_job_map_t *map;
orte_node_t *node;
orte_proc_t *proc;
hwloc_cpuset_t cpus;
unsigned int idx, ncpus;
struct hwloc_topology_support *support;
opal_hwloc_obj_data_t *data;
hwloc_obj_t locale, sib;
char *cpu_bitmap;
bool found;
opal_output_verbose(5, orte_rmaps_base_framework.framework_output,
"mca:rmaps: bind in place for job %s with bindings %s",
ORTE_JOBID_PRINT(jdata->jobid),
opal_hwloc_base_print_binding(jdata->map->binding));
/* initialize */
map = jdata->map;
for (i=0; i < map->nodes->size; i++) {
if (NULL == (node = (orte_node_t*)opal_pointer_array_get_item(map->nodes, i))) {
continue;
}
if (!orte_do_not_launch) {
/* if we don't want to launch, then we are just testing the system,
* so ignore questions about support capabilities
*/
support = (struct hwloc_topology_support*)hwloc_topology_get_support(node->topology);
/* check if topology supports cpubind - have to be careful here
* as Linux doesn't currently support thread-level binding. This
* may change in the future, though, and it isn't clear how hwloc
* interprets the current behavior. So check both flags to be sure.
*/
if (!support->cpubind->set_thisproc_cpubind &&
!support->cpubind->set_thisthread_cpubind) {
if (!OPAL_BINDING_REQUIRED(map->binding) ||
!OPAL_BINDING_POLICY_IS_SET(map->binding)) {
/* we are not required to bind, so ignore this */
continue;
}
orte_show_help("help-orte-rmaps-base.txt", "rmaps:cpubind-not-supported", true, node->name);
return ORTE_ERR_SILENT;
}
/* check if topology supports membind - have to be careful here
* as hwloc treats this differently than I (at least) would have
* expected. Per hwloc, Linux memory binding is at the thread,
* and not process, level. Thus, hwloc sets the "thisproc" flag
* to "false" on all Linux systems, and uses the "thisthread" flag
* to indicate binding capability - don't warn if the user didn't
* specifically request binding
*/
if (!support->membind->set_thisproc_membind &&
!support->membind->set_thisthread_membind &&
OPAL_BINDING_POLICY_IS_SET(map->binding)) {
if (OPAL_HWLOC_BASE_MBFA_WARN == opal_hwloc_base_mbfa && !membind_warned) {
orte_show_help("help-orte-rmaps-base.txt", "rmaps:membind-not-supported", true, node->name);
membind_warned = true;
} else if (OPAL_HWLOC_BASE_MBFA_ERROR == opal_hwloc_base_mbfa) {
orte_show_help("help-orte-rmaps-base.txt", "rmaps:membind-not-supported-fatal", true, node->name);
return ORTE_ERR_SILENT;
}
}
}
/* some systems do not report cores, and so we can get a situation where our
* default binding policy will fail for no necessary reason. So if we are
* computing a binding due to our default policy, and no cores are found
* on this node, just silently skip it - we will not bind
*/
if (!OPAL_BINDING_POLICY_IS_SET(map->binding) &&
HWLOC_TYPE_DEPTH_UNKNOWN == hwloc_get_type_depth(node->topology, HWLOC_OBJ_CORE)) {
opal_output_verbose(5, orte_rmaps_base_framework.framework_output,
"Unable to bind-to core by default on node %s as no cores detected",
node->name);
continue;
}
/* we share topologies in order
* to save space, so we need to reset the usage info to reflect
* our own current state
*/
reset_usage(node, jdata->jobid);
/* cycle thru the procs */
for (j=0; j < node->procs->size; j++) {
if (NULL == (proc = (orte_proc_t*)opal_pointer_array_get_item(node->procs, j))) {
continue;
}
/* ignore procs from other jobs */
if (proc->name.jobid != jdata->jobid) {
continue;
}
/* bozo check */
if (!orte_get_attribute(&proc->attributes, ORTE_PROC_HWLOC_LOCALE, (void**)&locale, OPAL_PTR)) {
orte_show_help("help-orte-rmaps-base.txt", "rmaps:no-locale", true, ORTE_NAME_PRINT(&proc->name));
return ORTE_ERR_SILENT;
}
/* get the index of this location */
if (UINT_MAX == (idx = opal_hwloc_base_get_obj_idx(node->topology, locale, OPAL_HWLOC_AVAILABLE))) {
ORTE_ERROR_LOG(ORTE_ERR_BAD_PARAM);
return ORTE_ERR_SILENT;
}
data = (opal_hwloc_obj_data_t*)locale->userdata;
/* get the number of cpus under this location */
if (0 == (ncpus = opal_hwloc_base_get_npus(node->topology, locale))) {
orte_show_help("help-orte-rmaps-base.txt", "rmaps:no-available-cpus", true, node->name);
return ORTE_ERR_SILENT;
}
/* if we don't have enough cpus to support this additional proc, try
* shifting the location to a cousin that can support it - the important
* thing is that we maintain the same level in the topology */
if (ncpus < (data->num_bound+1)) {
opal_output_verbose(5, orte_rmaps_base_framework.framework_output,
"%s bind_in_place: searching right",
ORTE_NAME_PRINT(ORTE_PROC_MY_NAME));
sib = locale;
found = false;
while (NULL != (sib = sib->next_cousin)) {
data = (opal_hwloc_obj_data_t*)sib->userdata;
ncpus = opal_hwloc_base_get_npus(node->topology, sib);
if (data->num_bound < ncpus) {
found = true;
locale = sib;
break;
}
}
if (!found) {
/* try the other direction */
opal_output_verbose(5, orte_rmaps_base_framework.framework_output,
"%s bind_in_place: searching left",
ORTE_NAME_PRINT(ORTE_PROC_MY_NAME));
sib = locale;
while (NULL != (sib = sib->prev_cousin)) {
data = (opal_hwloc_obj_data_t*)sib->userdata;
ncpus = opal_hwloc_base_get_npus(node->topology, sib);
if (data->num_bound < ncpus) {
found = true;
locale = sib;
break;
}
}
}
if (!found) {
/* no place to put this - see if overload is allowed */
if (!OPAL_BIND_OVERLOAD_ALLOWED(jdata->map->binding)) {
if (OPAL_BINDING_POLICY_IS_SET(jdata->map->binding)) {
/* if the user specified a binding policy, then we cannot meet
* it since overload isn't allowed, so error out - have the
* message indicate that setting overload allowed will remove
* this restriction */
orte_show_help("help-orte-rmaps-base.txt", "rmaps:binding-overload", true,
opal_hwloc_base_print_binding(map->binding), node->name,
data->num_bound, ncpus);
return ORTE_ERR_SILENT;
} else {
/* if we have the default binding policy, then just don't bind */
OPAL_SET_BINDING_POLICY(map->binding, OPAL_BIND_TO_NONE);
unbind_procs(jdata);
return ORTE_SUCCESS;
}
}
}
}
/* track the number bound */
data = (opal_hwloc_obj_data_t*)locale->userdata; // just in case it changed
data->num_bound++;
opal_output_verbose(5, orte_rmaps_base_framework.framework_output,
"BINDING PROC %s TO %s NUMBER %u",
ORTE_NAME_PRINT(&proc->name),
hwloc_obj_type_string(locale->type), idx);
/* bind the proc here */
cpus = opal_hwloc_base_get_available_cpus(node->topology, locale);
hwloc_bitmap_list_asprintf(&cpu_bitmap, cpus);
orte_set_attribute(&proc->attributes, ORTE_PROC_CPU_BITMAP, ORTE_ATTR_GLOBAL, cpu_bitmap, OPAL_STRING);
/* update the location, in case it changed */
orte_set_attribute(&proc->attributes, ORTE_PROC_HWLOC_BOUND, ORTE_ATTR_LOCAL, locale, OPAL_PTR);
opal_output_verbose(5, orte_rmaps_base_framework.framework_output,
"%s BOUND PROC %s TO %s[%s:%u] on node %s",
ORTE_NAME_PRINT(ORTE_PROC_MY_NAME),
ORTE_NAME_PRINT(&proc->name),
cpu_bitmap, hwloc_obj_type_string(locale->type),
idx, node->name);
if (NULL != cpu_bitmap) {
free(cpu_bitmap);
}
}
}
return ORTE_SUCCESS;
}
static int bind_upwards(orte_job_t *jdata,
orte_node_t *node,
hwloc_obj_type_t target,
unsigned cache_level)
{
/* traverse the hwloc topology tree on each node upwards
* until we find an object of type target - and then bind
* the process to that target
*/
int j;
orte_job_map_t *map;
orte_proc_t *proc;
hwloc_obj_t obj;
hwloc_cpuset_t cpus;
unsigned int idx, ncpus;
opal_hwloc_obj_data_t *data;
hwloc_obj_t locale;
char *cpu_bitmap;
opal_output_verbose(5, orte_rmaps_base_framework.framework_output,
"mca:rmaps: bind upwards for job %s with bindings %s",
ORTE_JOBID_PRINT(jdata->jobid),
opal_hwloc_base_print_binding(jdata->map->binding));
/* initialize */
map = jdata->map;
/* cycle thru the procs */
for (j=0; j < node->procs->size; j++) {
if (NULL == (proc = (orte_proc_t*)opal_pointer_array_get_item(node->procs, j))) {
continue;
}
/* ignore procs from other jobs */
if (proc->name.jobid != jdata->jobid) {
continue;
}
/* bozo check */
if (!orte_get_attribute(&proc->attributes, ORTE_PROC_HWLOC_LOCALE, (void**)&locale, OPAL_PTR)) {
orte_show_help("help-orte-rmaps-base.txt", "rmaps:no-locale", true, ORTE_NAME_PRINT(&proc->name));
return ORTE_ERR_SILENT;
}
/* starting at the locale, move up thru the parents
* to find the target object type
*/
cpu_bitmap = NULL;
for (obj = locale->parent; NULL != obj; obj = obj->parent) {
opal_output_verbose(5, orte_rmaps_base_framework.framework_output,
"%s bind:upward target %s type %s",
ORTE_NAME_PRINT(ORTE_PROC_MY_NAME),
hwloc_obj_type_string(target),
hwloc_obj_type_string(obj->type));
if (target == obj->type) {
if (HWLOC_OBJ_CACHE == target && cache_level != obj->attr->cache.depth) {
continue;
}
/* get its index */
if (UINT_MAX == (idx = opal_hwloc_base_get_obj_idx(node->topology, obj, OPAL_HWLOC_AVAILABLE))) {
ORTE_ERROR_LOG(ORTE_ERR_BAD_PARAM);
return ORTE_ERR_SILENT;
}
/* track the number bound */
data = (opal_hwloc_obj_data_t*)obj->userdata;
data->num_bound++;
/* get the number of cpus under this location */
if (0 == (ncpus = opal_hwloc_base_get_npus(node->topology, obj))) {
orte_show_help("help-orte-rmaps-base.txt", "rmaps:no-available-cpus", true, node->name);
return ORTE_ERR_SILENT;
}
/* error out if adding a proc would cause overload and that wasn't allowed,
* and it wasn't a default binding policy (i.e., the user requested it)
*/
if (ncpus < data->num_bound &&
!OPAL_BIND_OVERLOAD_ALLOWED(jdata->map->binding)) {
if (OPAL_BINDING_POLICY_IS_SET(jdata->map->binding)) {
/* if the user specified a binding policy, then we cannot meet
* it since overload isn't allowed, so error out - have the
* message indicate that setting overload allowed will remove
* this restriction */
orte_show_help("help-orte-rmaps-base.txt", "rmaps:binding-overload", true,
opal_hwloc_base_print_binding(map->binding), node->name,
data->num_bound, ncpus);
return ORTE_ERR_SILENT;
} else {
/* if we have the default binding policy, then just don't bind */
OPAL_SET_BINDING_POLICY(map->binding, OPAL_BIND_TO_NONE);
unbind_procs(jdata);
return ORTE_SUCCESS;
}
}
/* bind it here */
cpus = opal_hwloc_base_get_available_cpus(node->topology, obj);
hwloc_bitmap_list_asprintf(&cpu_bitmap, cpus);
orte_set_attribute(&proc->attributes, ORTE_PROC_CPU_BITMAP, ORTE_ATTR_GLOBAL, cpu_bitmap, OPAL_STRING);
/* record the location */
orte_set_attribute(&proc->attributes, ORTE_PROC_HWLOC_BOUND, ORTE_ATTR_LOCAL, obj, OPAL_PTR);
opal_output_verbose(5, orte_rmaps_base_framework.framework_output,
"%s BOUND PROC %s TO %s[%s:%u] on node %s",
ORTE_NAME_PRINT(ORTE_PROC_MY_NAME),
ORTE_NAME_PRINT(&proc->name),
cpu_bitmap,
hwloc_obj_type_string(target),
idx, node->name);
break;
}
}
if (NULL == cpu_bitmap && OPAL_BINDING_REQUIRED(jdata->map->binding)) {
/* didn't find anyone to bind to - this is an error
* unless the user specified if-supported
*/
orte_show_help("help-orte-rmaps-base.txt", "rmaps:binding-target-not-found", true,
opal_hwloc_base_print_binding(map->binding), node->name);
return ORTE_ERR_SILENT;
}
if (NULL != cpu_bitmap) {
free(cpu_bitmap);
}
}
return ORTE_SUCCESS;
}
static int bind_upwards(orte_job_t *jdata,
hwloc_obj_type_t target,
unsigned cache_level)
{
/* traverse the hwloc topology tree on each node upwards
* until we find an object of type target - and then bind
* the process to that target
*/
int i, j;
orte_job_map_t *map;
orte_node_t *node;
orte_proc_t *proc;
hwloc_obj_t obj;
hwloc_cpuset_t cpus;
unsigned int idx, ncpus;
struct hwloc_topology_support *support;
opal_hwloc_obj_data_t *data;
opal_output_verbose(5, orte_rmaps_base_framework.framework_output,
"mca:rmaps: bind upwards for job %s with bindings %s",
ORTE_JOBID_PRINT(jdata->jobid),
opal_hwloc_base_print_binding(jdata->map->binding));
/* initialize */
map = jdata->map;
for (i=0; i < map->nodes->size; i++) {
if (NULL == (node = (orte_node_t*)opal_pointer_array_get_item(map->nodes, i))) {
continue;
}
if (!orte_do_not_launch) {
/* if we don't want to launch, then we are just testing the system,
* so ignore questions about support capabilities
*/
support = (struct hwloc_topology_support*)hwloc_topology_get_support(node->topology);
/* check if topology supports cpubind - have to be careful here
* as Linux doesn't currently support thread-level binding. This
* may change in the future, though, and it isn't clear how hwloc
* interprets the current behavior. So check both flags to be sure.
*/
if (!support->cpubind->set_thisproc_cpubind &&
!support->cpubind->set_thisthread_cpubind) {
if (!OPAL_BINDING_REQUIRED(opal_hwloc_binding_policy)) {
/* we are not required to bind, so ignore this */
continue;
}
orte_show_help("help-orte-rmaps-base.txt", "rmaps:cpubind-not-supported", true, node->name);
return ORTE_ERR_SILENT;
}
/* check if topology supports membind - have to be careful here
* as hwloc treats this differently than I (at least) would have
* expected. Per hwloc, Linux memory binding is at the thread,
* and not process, level. Thus, hwloc sets the "thisproc" flag
* to "false" on all Linux systems, and uses the "thisthread" flag
* to indicate binding capability
*/
if (!support->membind->set_thisproc_membind &&
!support->membind->set_thisthread_membind) {
if (OPAL_HWLOC_BASE_MBFA_WARN == opal_hwloc_base_mbfa && !membind_warned) {
orte_show_help("help-orte-rmaps-base.txt", "rmaps:membind-not-supported", true, node->name);
membind_warned = true;
} else if (OPAL_HWLOC_BASE_MBFA_ERROR == opal_hwloc_base_mbfa) {
orte_show_help("help-orte-rmaps-base.txt", "rmaps:membind-not-supported-fatal", true, node->name);
return ORTE_ERR_SILENT;
}
}
}
/* clear the topology of any prior usage numbers */
opal_hwloc_base_clear_usage(node->topology);
/* cycle thru the procs */
for (j=0; j < node->procs->size; j++) {
if (NULL == (proc = (orte_proc_t*)opal_pointer_array_get_item(node->procs, j))) {
continue;
}
/* ignore procs from other jobs */
if (proc->name.jobid != jdata->jobid) {
continue;
}
/* ignore procs that have already been bound - should
* never happen, but safer
*/
if (NULL != proc->cpu_bitmap) {
continue;
}
/* bozo check */
if (NULL == proc->locale) {
opal_output(0, "BIND UPWARDS: LOCALE FOR PROC %s IS NULL", ORTE_NAME_PRINT(&proc->name));
return ORTE_ERR_SILENT;
}
/* starting at the locale, move up thru the parents
* to find the target object type
*/
for (obj = proc->locale->parent; NULL != obj; obj = obj->parent) {
opal_output(0, "%s bind:upward target %s type %s",
ORTE_NAME_PRINT(ORTE_PROC_MY_NAME),
hwloc_obj_type_string(target),
hwloc_obj_type_string(obj->type));
if (target == obj->type) {
if (HWLOC_OBJ_CACHE == target && cache_level != obj->attr->cache.depth) {
continue;
}
/* get its index */
if (UINT_MAX == (idx = opal_hwloc_base_get_obj_idx(node->topology, obj, OPAL_HWLOC_AVAILABLE))) {
return ORTE_ERR_SILENT;
}
/* track the number bound */
data = (opal_hwloc_obj_data_t*)obj->userdata;
data->num_bound++;
/* get the number of cpus under this location */
if (0 == (ncpus = opal_hwloc_base_get_npus(node->topology, obj))) {
orte_show_help("help-orte-rmaps-base.txt", "rmaps:no-available-cpus", true, node->name);
return ORTE_ERR_SILENT;
}
/* error out if adding a proc would cause overload and that wasn't allowed */
if (ncpus < data->num_bound &&
!OPAL_BIND_OVERLOAD_ALLOWED(jdata->map->binding)) {
orte_show_help("help-orte-rmaps-base.txt", "rmaps:binding-overload", true,
opal_hwloc_base_print_binding(map->binding), node->name,
data->num_bound, ncpus);
return ORTE_ERR_SILENT;
}
/* bind it here */
cpus = opal_hwloc_base_get_available_cpus(node->topology, obj);
hwloc_bitmap_list_asprintf(&proc->cpu_bitmap, cpus);
opal_output_verbose(5, orte_rmaps_base_framework.framework_output,
"%s BOUND PROC %s TO %s[%s:%u] on node %s",
ORTE_NAME_PRINT(ORTE_PROC_MY_NAME),
ORTE_NAME_PRINT(&proc->name),
proc->cpu_bitmap,
hwloc_obj_type_string(target),
idx, node->name);
break;
}
}
if (NULL == proc->cpu_bitmap && OPAL_BINDING_REQUIRED(jdata->map->binding)) {
/* didn't find anyone to bind to - this is an error
* unless the user specified if-supported
*/
orte_show_help("help-orte-rmaps-base.txt", "rmaps:binding-target-not-found", true,
opal_hwloc_base_print_binding(map->binding), node->name);
return ORTE_ERR_SILENT;
}
}
}
return ORTE_SUCCESS;
}
static int bind_downwards(orte_job_t *jdata,
hwloc_obj_type_t target,
unsigned cache_level)
{
int i, j;
orte_job_map_t *map;
orte_node_t *node;
orte_proc_t *proc;
hwloc_obj_t trg_obj, nxt_obj;
hwloc_cpuset_t cpus;
unsigned int ncpus;
struct hwloc_topology_support *support;
opal_hwloc_obj_data_t *data;
int total_cpus;
hwloc_cpuset_t totalcpuset;
opal_output_verbose(5, orte_rmaps_base_framework.framework_output,
"mca:rmaps: bind downward for job %s with bindings %s",
ORTE_JOBID_PRINT(jdata->jobid),
opal_hwloc_base_print_binding(jdata->map->binding));
/* initialize */
map = jdata->map;
totalcpuset = hwloc_bitmap_alloc();
for (i=0; i < map->nodes->size; i++) {
if (NULL == (node = (orte_node_t*)opal_pointer_array_get_item(map->nodes, i))) {
continue;
}
if (!orte_do_not_launch) {
/* if we don't want to launch, then we are just testing the system,
* so ignore questions about support capabilities
*/
support = (struct hwloc_topology_support*)hwloc_topology_get_support(node->topology);
/* check if topology supports cpubind - have to be careful here
* as Linux doesn't currently support thread-level binding. This
* may change in the future, though, and it isn't clear how hwloc
* interprets the current behavior. So check both flags to be sure.
*/
if (!support->cpubind->set_thisproc_cpubind &&
!support->cpubind->set_thisthread_cpubind) {
if (!OPAL_BINDING_REQUIRED(opal_hwloc_binding_policy)) {
/* we are not required to bind, so ignore this */
continue;
}
orte_show_help("help-orte-rmaps-base.txt", "rmaps:cpubind-not-supported", true, node->name);
hwloc_bitmap_free(totalcpuset);
return ORTE_ERR_SILENT;
}
/* check if topology supports membind - have to be careful here
* as hwloc treats this differently than I (at least) would have
* expected. Per hwloc, Linux memory binding is at the thread,
* and not process, level. Thus, hwloc sets the "thisproc" flag
* to "false" on all Linux systems, and uses the "thisthread" flag
* to indicate binding capability
*/
if (!support->membind->set_thisproc_membind &&
!support->membind->set_thisthread_membind) {
if (OPAL_HWLOC_BASE_MBFA_WARN == opal_hwloc_base_mbfa && !membind_warned) {
orte_show_help("help-orte-rmaps-base.txt", "rmaps:membind-not-supported", true, node->name);
membind_warned = true;
} else if (OPAL_HWLOC_BASE_MBFA_ERROR == opal_hwloc_base_mbfa) {
orte_show_help("help-orte-rmaps-base.txt", "rmaps:membind-not-supported-fatal", true, node->name);
hwloc_bitmap_free(totalcpuset);
return ORTE_ERR_SILENT;
}
}
}
/* clear the topology of any prior usage numbers */
opal_hwloc_base_clear_usage(node->topology);
/* cycle thru the procs */
for (j=0; j < node->procs->size; j++) {
if (NULL == (proc = (orte_proc_t*)opal_pointer_array_get_item(node->procs, j))) {
continue;
}
/* ignore procs from other jobs */
if (proc->name.jobid != jdata->jobid) {
continue;
}
/* ignore procs that have already been bound - should
* never happen, but safer
*/
if (NULL != proc->cpu_bitmap) {
continue;
}
/* we don't know if the target is a direct child of this locale,
* or if it is some depth below it, so we have to conduct a bit
* of a search. Let hwloc find the min usage one for us.
*/
trg_obj = opal_hwloc_base_find_min_bound_target_under_obj(node->topology,
proc->locale,
target, cache_level);
if (NULL == trg_obj) {
/* there aren't any such targets under this object */
orte_show_help("help-orte-rmaps-base.txt", "rmaps:no-available-cpus", true, node->name);
hwloc_bitmap_free(totalcpuset);
return ORTE_ERR_SILENT;
}
/* start with a clean slate */
hwloc_bitmap_zero(totalcpuset);
total_cpus = 0;
nxt_obj = trg_obj;
do {
if (NULL == nxt_obj) {
/* could not find enough cpus to meet request */
orte_show_help("help-orte-rmaps-base.txt", "rmaps:no-available-cpus", true, node->name);
hwloc_bitmap_free(totalcpuset);
return ORTE_ERR_SILENT;
}
trg_obj = nxt_obj;
/* get the number of cpus under this location */
ncpus = opal_hwloc_base_get_npus(node->topology, trg_obj);
opal_output_verbose(5, orte_rmaps_base_framework.framework_output,
"%s GOT %d CPUS",
ORTE_NAME_PRINT(ORTE_PROC_MY_NAME), ncpus);
/* track the number bound */
if (NULL == (data = (opal_hwloc_obj_data_t*)trg_obj->userdata)) {
data = OBJ_NEW(opal_hwloc_obj_data_t);
trg_obj->userdata = data;
}
data->num_bound++;
/* error out if adding a proc would cause overload and that wasn't allowed */
if (ncpus < data->num_bound &&
!OPAL_BIND_OVERLOAD_ALLOWED(jdata->map->binding)) {
orte_show_help("help-orte-rmaps-base.txt", "rmaps:binding-overload", true,
opal_hwloc_base_print_binding(map->binding), node->name,
data->num_bound, ncpus);
hwloc_bitmap_free(totalcpuset);
return ORTE_ERR_SILENT;
}
/* bind the proc here */
cpus = opal_hwloc_base_get_available_cpus(node->topology, trg_obj);
hwloc_bitmap_or(totalcpuset, totalcpuset, cpus);
total_cpus += ncpus;
/* move to the next location, in case we need it */
nxt_obj = trg_obj->next_cousin;
} while (total_cpus < orte_rmaps_base.cpus_per_rank);
hwloc_bitmap_list_asprintf(&proc->cpu_bitmap, totalcpuset);
if (4 < opal_output_get_verbosity(orte_rmaps_base_framework.framework_output)) {
char tmp1[1024], tmp2[1024];
opal_hwloc_base_cset2str(tmp1, sizeof(tmp1), totalcpuset);
opal_hwloc_base_cset2mapstr(tmp2, sizeof(tmp2), totalcpuset);
opal_output(orte_rmaps_base_framework.framework_output,
"%s BOUND PROC %s[%s] TO %s: %s",
ORTE_NAME_PRINT(ORTE_PROC_MY_NAME),
ORTE_NAME_PRINT(&proc->name), node->name,
tmp1, tmp2);
}
}
}
hwloc_bitmap_free(totalcpuset);
return ORTE_SUCCESS;
}
