void FLwsWebSocket::DelayConnectionError(const FString& Error)
{
// report connection error on the next tick, so we don't invoke event handlers on the current stack frame
FTicker::GetCoreTicker().AddTicker(FTickerDelegate::CreateLambda([=](float) -> bool
{
bIsConnecting = false;
OnConnectionError().Broadcast(Error);
return false;
}));
}
//--------------------------------------------------------------------------------
bool CPipeConnector::Connect()
{
_WINQ_FCONTEXT( "CPipeConnector::Connect" );
unsigned long ulError = 0;
CTime Time;
unsigned long ulInitialTickCount = Time.GetTickCount();
do
{
m_bConnected = m_Pipe.Open( m_strServerName, m_strPipeName, m_ulAccess, m_ulShareMode, m_pSecurity, m_ulFlags );
if( !m_bConnected )
{
ulError = m_ErrorHelper.GetLastError();
}
}while( !m_bConnected && ( ulError == nsWin32::ErrorPipeBusy ) && ( ( Time.GetTickCount() - ulInitialTickCount ) < m_ulConnectionTimeout ) );
if( !AsyncConnection() )
{
m_bConnected ? OnConnected() : OnConnectionError();
}
return m_bConnected;
}
void CIOCPServer::HandleIO(DWORD dwKey, CIOCPBuffer *pBuffer, DWORD dwTrans, int nError)
{
CIOCPContext *pContext = (CIOCPContext *)dwKey;
#ifdef _DEBUG
// ::OutputDebugString(" HandleIO... \n");
#endif // _DEBUG
// 1）首先减少套节字上的未决I/O计数
if(pContext != NULL)
{
::EnterCriticalSection(&pContext->Lock);
if(pBuffer->nOperation == OP_READ)
pContext->nOutstandingRecv --;
else if(pBuffer->nOperation == OP_WRITE)
pContext->nOutstandingSend --;
::LeaveCriticalSection(&pContext->Lock);
// 2）检查套节字是否已经被我们关闭
if(pContext->bClosing)
{
#ifdef _DEBUG
::OutputDebugString(" pContext->bClosing 检查到套节字已经被我们关闭 \n");
#endif // _DEBUG
if(pContext->nOutstandingRecv == 0 && pContext->nOutstandingSend == 0)
{
ReleaseContext(pContext);
}
// 释放已关闭套节字的未决I/O
ReleaseBuffer(pBuffer);
return;
}
}
else
{
RemovePendingAccept(pBuffer);
#ifdef _DEBUG
::OutputDebugString("RemovePendingAccept 检查到套节字连接超时未完成被我们关闭 \n");
#endif // _DEBUG
}
// 3）检查套节字上发生的错误，如果有的话，通知用户，然后关闭套节字
if(nError != NO_ERROR)
{
if(pBuffer->nOperation != OP_ACCEPT)
{
OnConnectionError(pContext, pBuffer, nError);
CloseAConnection(pContext);
if(pContext->nOutstandingRecv == 0 && pContext->nOutstandingSend == 0)
{
ReleaseContext(pContext);
}
#ifdef _DEBUG
::OutputDebugString("nError 非OP_ACCEPT检查到客户套节字上发生错误 \n");
#endif // _DEBUG
}
else // 在监听套节字上发生错误，也就是监听套节字处理的客户出错了
{
// 客户端出错，释放I/O缓冲区
if(pBuffer->sClient != INVALID_SOCKET)
{
::closesocket(pBuffer->sClient);
pBuffer->sClient = INVALID_SOCKET;
}
#ifdef _DEBUG
::OutputDebugString("nError Listen SOCKET检查到监听套节字上发生错误 \n");
#endif // _DEBUG
}
ReleaseBuffer(pBuffer);
return;
}
// 开始处理
if(pBuffer->nOperation == OP_ACCEPT)
{
if(dwTrans == 0)
{
#ifdef _DEBUG
::OutputDebugString("OP_ACCEPT 监听套节字上客户端关闭 \n");
#endif // _DEBUG
if(pBuffer->sClient != INVALID_SOCKET)
{
::closesocket(pBuffer->sClient);
pBuffer->sClient = INVALID_SOCKET;
}
}
else
{
// 为新接受的连接申请客户上下文对象
CIOCPContext *pClient = AllocateContext(pBuffer->sClient);
if(pClient != NULL)
{
if(AddAConnection(pClient))
{
// 取得客户地址
int nLocalLen, nRmoteLen;
LPSOCKADDR pLocalAddr, pRemoteAddr;
m_lpfnGetAcceptExSockaddrs(
pBuffer->buff,
pBuffer->nLen - ((sizeof(sockaddr_in) + 16) * 2),
sizeof(sockaddr_in) + 16,
sizeof(sockaddr_in) + 16,
(SOCKADDR **)&pLocalAddr,
&nLocalLen,
(SOCKADDR **)&pRemoteAddr,
&nRmoteLen);
memcpy(&pClient->addrLocal, pLocalAddr, nLocalLen);
memcpy(&pClient->addrRemote, pRemoteAddr, nRmoteLen);
// 关联新连接到完成端口对象
::CreateIoCompletionPort((HANDLE)pClient->s, m_hCompletion, (DWORD)pClient, 0);
// 通知用户
pBuffer->nLen = dwTrans;
OnConnectionEstablished(pClient, pBuffer);
// 向新连接投递几个Read请求，这些空间在套节字关闭或出错时释放
for(int i=0; i<m_nInitialReads ; i++)
{
CIOCPBuffer *p = AllocateBuffer(BUFFER_SIZE);
if(p != NULL)
{
if(!PostRecv(pClient, p))
{
CloseAConnection(pClient);
break;
}
}
}
}
else // 连接数量已满，关闭连接
{
CloseAConnection(pClient);
ReleaseContext(pClient);
}
}
else
{
// 资源不足，关闭与客户的连接即可
::closesocket(pBuffer->sClient);
pBuffer->sClient = INVALID_SOCKET;
}
}
// Accept请求完成，释放I/O缓冲区
ReleaseBuffer(pBuffer);
// 通知监听线程继续再投递一个Accept请求
::InterlockedIncrement(&m_nRepostCount);
::SetEvent(m_hRepostEvent);
}
else if(pBuffer->nOperation == OP_READ)
{
if(dwTrans == 0) // 对方关闭套节字
{
// 先通知用户
pBuffer->nLen = 0;
OnConnectionClosing(pContext, pBuffer);
// 再关闭连接
CloseAConnection(pContext);
// 释放客户上下文和缓冲区对象
if(pContext->nOutstandingRecv == 0 && pContext->nOutstandingSend == 0)
{
ReleaseContext(pContext);
}
ReleaseBuffer(pBuffer);
}
else
{
pBuffer->nLen = dwTrans;
// 按照I/O投递的顺序读取接收到的数据
CIOCPBuffer *p = GetNextReadBuffer(pContext, pBuffer);
while(p != NULL)
{
// 通知用户
OnReadCompleted(pContext, p);
// 增加要读的序列号的值
::InterlockedIncrement((LONG*)&pContext->nCurrentReadSequence);
// 释放这个已完成的I/O
ReleaseBuffer(p);
p = GetNextReadBuffer(pContext, NULL);
}
// printf("空闲buffer数:%d \n",m_nFreeBufferCount);
if (pContext->nOutstandingRecv <= 0)
{
for(int i=0; i<m_nInitialReads ; i++)
{
// 继续投递几个新的重叠接收请求,这样能达到最快速度
// 因为此时pBuffer已经释放或被保存到缓冲区,所以分配一个新的
pBuffer = AllocateBuffer(BUFFER_SIZE);
if(pBuffer != NULL)
{
if(!PostRecv(pContext, pBuffer))
{
CloseAConnection(pContext);
break;
}
}
}
}
}
}
else if(pBuffer->nOperation == OP_WRITE)
{
if(dwTrans == 0) // 对方关闭套节字
{
// 先通知用户
pBuffer->nLen = 0;
OnConnectionClosing(pContext, pBuffer);
// 再关闭连接
CloseAConnection(pContext);
// 释放客户上下文和缓冲区对象
if(pContext->nOutstandingRecv == 0 && pContext->nOutstandingSend == 0)
{
ReleaseContext(pContext);
}
ReleaseBuffer(pBuffer);
}
else
{
// 写操作完成，通知用户
pBuffer->nLen = dwTrans;
OnWriteCompleted(pContext, pBuffer);
// 释放SendText函数申请的缓冲区
ReleaseBuffer(pBuffer);
}
}
}
