nsresult nsOutlookMail::ImportAddresses(uint32_t *pCount, uint32_t *pTotal, const PRUnichar *pName, uint32_t id, nsIAddrDatabase *pDb, nsString& errors)
{
if (id >= (uint32_t)(m_addressList.GetSize())) {
IMPORT_LOG0("*** Bad address identifier, unable to import\n");
return NS_ERROR_FAILURE;
}
uint32_t dummyCount = 0;
if (pCount)
*pCount = 0;
else
pCount = &dummyCount;
CMapiFolder *pFolder;
if (id > 0) {
int32_t idx = (int32_t) id;
idx--;
while (idx >= 0) {
pFolder = m_addressList.GetItem(idx);
if (pFolder->IsStore()) {
OpenMessageStore(pFolder);
break;
}
idx--;
}
}
pFolder = m_addressList.GetItem(id);
OpenMessageStore(pFolder);
if (!m_lpMdb) {
IMPORT_LOG1("*** Unable to obtain mapi message store for address book: %S\n", pName);
return NS_ERROR_FAILURE;
}
if (pFolder->IsStore())
return NS_OK;
nsresult rv;
nsCOMPtr<nsIImportFieldMap> pFieldMap;
nsCOMPtr<nsIImportService> impSvc(do_GetService(NS_IMPORTSERVICE_CONTRACTID, &rv));
if (NS_SUCCEEDED(rv)) {
rv = impSvc->CreateNewFieldMap(getter_AddRefs(pFieldMap));
}
CMapiFolderContents contents(m_lpMdb, pFolder->GetCBEntryID(), pFolder->GetEntryID());
BOOL done = FALSE;
ULONG cbEid;
LPENTRYID lpEid;
ULONG oType;
LPMESSAGE lpMsg;
nsCString type;
LPSPropValue pVal;
nsString subject;
while (!done) {
(*pCount)++;
if (!contents.GetNext(&cbEid, &lpEid, &oType, &done)) {
IMPORT_LOG1("*** Error iterating address book: %S\n", pName);
return NS_ERROR_FAILURE;
}
if (pTotal && (*pTotal == 0))
*pTotal = contents.GetCount();
if (!done && (oType == MAPI_MESSAGE)) {
if (!m_mapi.OpenMdbEntry(m_lpMdb, cbEid, lpEid, (LPUNKNOWN *) &lpMsg)) {
IMPORT_LOG1("*** Error opening messages in mailbox: %S\n", pName);
return NS_ERROR_FAILURE;
}
// Get the PR_MESSAGE_CLASS attribute,
// ensure that it is IPM.Contact
pVal = m_mapi.GetMapiProperty(lpMsg, PR_MESSAGE_CLASS);
if (pVal) {
type.Truncate();
m_mapi.GetStringFromProp(pVal, type);
if (type.EqualsLiteral("IPM.Contact")) {
// This is a contact, add it to the address book!
subject.Truncate();
pVal = m_mapi.GetMapiProperty(lpMsg, PR_SUBJECT);
if (pVal)
m_mapi.GetStringFromProp(pVal, subject);
nsIMdbRow* newRow = nullptr;
pDb->GetNewRow(&newRow);
// FIXME: Check with Candice about releasing the newRow if it
// isn't added to the database. Candice's code in nsAddressBook
// never releases it but that doesn't seem right to me!
if (newRow) {
if (BuildCard(subject.get(), pDb, newRow, lpMsg, pFieldMap)) {
pDb->AddCardRowToDB(newRow);
}
}
}
else if (type.EqualsLiteral("IPM.DistList"))
{
// This is a list/group, add it to the address book!
subject.Truncate();
pVal = m_mapi.GetMapiProperty(lpMsg, PR_SUBJECT);
if (pVal)
m_mapi.GetStringFromProp(pVal, subject);
CreateList(subject.get(), pDb, lpMsg, pFieldMap);
}
}
lpMsg->Release();
}
}
rv = pDb->Commit(nsAddrDBCommitType::kLargeCommit);
return rv;
}
nsresult nsOutlookMail::ImportMailbox( PRUint32 *pDoneSoFar, bool *pAbort, PRInt32 index, const PRUnichar *pName, nsIFile *pDest, PRInt32 *pMsgCount)
{
if ((index < 0) || (index >= m_folderList.GetSize())) {
IMPORT_LOG0( "*** Bad mailbox identifier, unable to import\n");
*pAbort = PR_TRUE;
return( NS_ERROR_FAILURE);
}
PRInt32 dummyMsgCount = 0;
if (pMsgCount)
*pMsgCount = 0;
else
pMsgCount = &dummyMsgCount;
CMapiFolder *pFolder = m_folderList.GetItem( index);
OpenMessageStore( pFolder);
if (!m_lpMdb) {
IMPORT_LOG1( "*** Unable to obtain mapi message store for mailbox: %S\n", pName);
return( NS_ERROR_FAILURE);
}
if (pFolder->IsStore())
return( NS_OK);
nsresult rv;
// now what?
CMapiFolderContents contents( m_lpMdb, pFolder->GetCBEntryID(), pFolder->GetEntryID());
BOOL done = FALSE;
ULONG cbEid;
LPENTRYID lpEid;
ULONG oType;
LPMESSAGE lpMsg = nsnull;
ULONG totalCount;
PRFloat64 doneCalc;
nsCOMPtr<nsIOutputStream> destOutputStream;
rv = MsgNewBufferedFileOutputStream(getter_AddRefs(destOutputStream), pDest, -1, 0600);
NS_ENSURE_SUCCESS(rv, rv);
while (!done) {
if (!contents.GetNext( &cbEid, &lpEid, &oType, &done)) {
IMPORT_LOG1( "*** Error iterating mailbox: %S\n", pName);
return( NS_ERROR_FAILURE);
}
totalCount = contents.GetCount();
doneCalc = *pMsgCount;
doneCalc /= totalCount;
doneCalc *= 1000;
if (pDoneSoFar) {
*pDoneSoFar = (PRUint32) doneCalc;
if (*pDoneSoFar > 1000)
*pDoneSoFar = 1000;
}
if (!done && (oType == MAPI_MESSAGE)) {
if (!m_mapi.OpenMdbEntry( m_lpMdb, cbEid, lpEid, (LPUNKNOWN *) &lpMsg)) {
IMPORT_LOG1( "*** Error opening messages in mailbox: %S\n", pName);
return( NS_ERROR_FAILURE);
}
// See if it's a drafts folder. Outlook doesn't allow drafts
// folder to be configured so it's ok to hard code it here.
nsAutoString folderName(pName);
nsMsgDeliverMode mode = nsIMsgSend::nsMsgDeliverNow;
mode = nsIMsgSend::nsMsgSaveAsDraft;
if ( folderName.LowerCaseEqualsLiteral("drafts") )
mode = nsIMsgSend::nsMsgSaveAsDraft;
rv = ImportMessage(lpMsg, destOutputStream, mode);
if (NS_SUCCEEDED( rv)) // No errors & really imported
(*pMsgCount)++;
else {
IMPORT_LOG1( "*** Error reading message from mailbox: %S\n", pName);
}
}
}
return( NS_OK);
}
nsresult nsOutlookMail::ImportMailbox(uint32_t *pDoneSoFar, bool *pAbort,
int32_t index, const PRUnichar *pName,
nsIMsgFolder *dstFolder,
int32_t *pMsgCount)
{
if ((index < 0) || (index >= m_folderList.GetSize())) {
IMPORT_LOG0("*** Bad mailbox identifier, unable to import\n");
*pAbort = true;
return NS_ERROR_FAILURE;
}
int32_t dummyMsgCount = 0;
if (pMsgCount)
*pMsgCount = 0;
else
pMsgCount = &dummyMsgCount;
CMapiFolder *pFolder = m_folderList.GetItem(index);
OpenMessageStore(pFolder);
if (!m_lpMdb) {
IMPORT_LOG1("*** Unable to obtain mapi message store for mailbox: %S\n", pName);
return NS_ERROR_FAILURE;
}
if (pFolder->IsStore())
return NS_OK;
// now what?
CMapiFolderContents contents(m_lpMdb, pFolder->GetCBEntryID(), pFolder->GetEntryID());
BOOL done = FALSE;
ULONG cbEid;
LPENTRYID lpEid;
ULONG oType;
LPMESSAGE lpMsg = nullptr;
ULONG totalCount;
double doneCalc;
nsCOMPtr<nsIOutputStream> outputStream;
nsCOMPtr<nsIMsgPluggableStore> msgStore;
nsresult rv = dstFolder->GetMsgStore(getter_AddRefs(msgStore));
NS_ENSURE_SUCCESS(rv, rv);
while (!done) {
if (!contents.GetNext(&cbEid, &lpEid, &oType, &done)) {
IMPORT_LOG1("*** Error iterating mailbox: %S\n", pName);
return NS_ERROR_FAILURE;
}
nsCOMPtr<nsIMsgDBHdr> msgHdr;
bool reusable;
rv = msgStore->GetNewMsgOutputStream(dstFolder, getter_AddRefs(msgHdr), &reusable,
getter_AddRefs(outputStream));
totalCount = contents.GetCount();
doneCalc = *pMsgCount;
doneCalc /= totalCount;
doneCalc *= 1000;
if (pDoneSoFar) {
*pDoneSoFar = (uint32_t) doneCalc;
if (*pDoneSoFar > 1000)
*pDoneSoFar = 1000;
}
if (!done && (oType == MAPI_MESSAGE)) {
if (!m_mapi.OpenMdbEntry(m_lpMdb, cbEid, lpEid, (LPUNKNOWN *) &lpMsg)) {
IMPORT_LOG1("*** Error opening messages in mailbox: %S\n", pName);
return NS_ERROR_FAILURE;
}
// See if it's a drafts folder. Outlook doesn't allow drafts
// folder to be configured so it's ok to hard code it here.
nsAutoString folderName(pName);
nsMsgDeliverMode mode = nsIMsgSend::nsMsgDeliverNow;
mode = nsIMsgSend::nsMsgSaveAsDraft;
if (folderName.LowerCaseEqualsLiteral("drafts"))
mode = nsIMsgSend::nsMsgSaveAsDraft;
rv = ImportMessage(lpMsg, outputStream, mode);
if (NS_SUCCEEDED(rv)){ // No errors & really imported
(*pMsgCount)++;
msgStore->FinishNewMessage(outputStream, msgHdr);
}
else {
IMPORT_LOG1( "*** Error reading message from mailbox: %S\n", pName);
msgStore->DiscardNewMessage(outputStream, msgHdr);
}
if (!reusable)
outputStream->Close();
}
}
if (outputStream)
outputStream->Close();
return NS_OK;
}
nsresult nsOutlookMail::ImportMailbox( PRUint32 *pDoneSoFar, PRBool *pAbort, PRInt32 index, const PRUnichar *pName, nsIFile *pDest, PRInt32 *pMsgCount)
{
if ((index < 0) || (index >= m_folderList.GetSize())) {
IMPORT_LOG0( "*** Bad mailbox identifier, unable to import\n");
*pAbort = PR_TRUE;
return( NS_ERROR_FAILURE);
}
PRInt32 dummyMsgCount = 0;
if (pMsgCount)
*pMsgCount = 0;
else
pMsgCount = &dummyMsgCount;
CMapiFolder *pFolder = m_folderList.GetItem( index);
OpenMessageStore( pFolder);
if (!m_lpMdb) {
IMPORT_LOG1( "*** Unable to obtain mapi message store for mailbox: %S\n", pName);
return( NS_ERROR_FAILURE);
}
if (pFolder->IsStore())
return( NS_OK);
nsresult rv;
nsOutlookCompose compose;
SimpleBufferTonyRCopiedTwice copy;
copy.Allocate( kCopyBufferSize);
// now what?
CMapiFolderContents contents( m_lpMdb, pFolder->GetCBEntryID(), pFolder->GetEntryID());
BOOL done = FALSE;
ULONG cbEid;
LPENTRYID lpEid;
ULONG oType;
LPMESSAGE lpMsg = nsnull;
int attachCount;
ULONG totalCount;
PRFloat64 doneCalc;
nsCString fromLine;
int fromLen;
PRBool lostAttach = PR_FALSE;
nsCOMPtr<nsIOutputStream> destOutputStream;
rv = NS_NewLocalFileOutputStream(getter_AddRefs(destOutputStream), pDest, -1, 0600);
NS_ENSURE_SUCCESS(rv, rv);
while (!done) {
if (!contents.GetNext( &cbEid, &lpEid, &oType, &done)) {
IMPORT_LOG1( "*** Error iterating mailbox: %S\n", pName);
return( NS_ERROR_FAILURE);
}
totalCount = contents.GetCount();
doneCalc = *pMsgCount;
doneCalc /= totalCount;
doneCalc *= 1000;
if (pDoneSoFar) {
*pDoneSoFar = (PRUint32) doneCalc;
if (*pDoneSoFar > 1000)
*pDoneSoFar = 1000;
}
if (!done && (oType == MAPI_MESSAGE)) {
if (!m_mapi.OpenMdbEntry( m_lpMdb, cbEid, lpEid, (LPUNKNOWN *) &lpMsg)) {
IMPORT_LOG1( "*** Error opening messages in mailbox: %S\n", pName);
return( NS_ERROR_FAILURE);
}
CMapiMessage msg( lpMsg);
BOOL bResult = msg.FetchHeaders();
if (bResult)
bResult = msg.FetchBody();
if (bResult)
fromLine = msg.GetFromLine( fromLen);
attachCount = msg.CountAttachments();
BuildAttachments( msg, attachCount);
if (!bResult) {
IMPORT_LOG1( "*** Error reading message from mailbox: %S\n", pName);
return( NS_ERROR_FAILURE);
}
// --------------------------------------------------------------
compose.SetBody( msg.GetBody());
// Need to convert all headers to unicode (for i18n).
// Init header here since 'composes' is used for all msgs.
compose.SetHeaders("");
nsAutoString newheader;
nsCAutoString tempCStr(msg.GetHeaders(), msg.GetHeaderLen());
rv = nsMsgI18NConvertToUnicode(nsMsgI18NFileSystemCharset(),
tempCStr, newheader);
NS_ASSERTION(NS_SUCCEEDED(rv), "failed to convert headers to utf8");
if (NS_SUCCEEDED(rv))
compose.SetHeaders(NS_ConvertUTF16toUTF8(newheader).get());
compose.SetAttachments( &m_attachments);
// See if it's a drafts folder. Outlook doesn't allow drafts
// folder to be configured so it's ok to hard code it here.
nsAutoString folderName(pName);
nsMsgDeliverMode mode = nsIMsgSend::nsMsgDeliverNow;
mode = nsIMsgSend::nsMsgSaveAsDraft;
if ( folderName.LowerCaseEqualsLiteral("drafts") )
mode = nsIMsgSend::nsMsgSaveAsDraft;
/*
If I can't get no headers,
I can't get no satisfaction
*/
if (msg.GetHeaderLen()) {
nsCAutoString cType;
SetDefaultContentType(msg, cType);
nsCOMPtr<nsIFile> compositionFile;
rv = compose.SendTheMessage(mode, cType, getter_AddRefs(compositionFile));
if (NS_SUCCEEDED( rv)) {
rv = compose.CopyComposedMessage( fromLine, compositionFile, destOutputStream, copy);
DeleteFile( compositionFile);
if (NS_FAILED( rv)) {
IMPORT_LOG0( "*** Error copying composed message to destination mailbox\n");
return( rv);
}
(*pMsgCount)++;
}
}
else
rv = NS_OK;
// The following code to write msg to folder when compose.SendTheMessage() fails is commented
// out for now because the code doesn't handle attachments and users will complain anyway so
// until we fix the code to handle all kinds of msgs correctly we should not even make users
// think that all msgs are imported ok. This will also help users to identify which msgs are
// not imported and help to debug the problem.
#if 0
if (NS_FAILED( rv)) {
/* NS_PRECONDITION( FALSE, "Manual breakpoint"); */
IMPORT_LOG1( "Message #%d failed.\n", (int) (*pMsgCount));
DumpAttachments();
// --------------------------------------------------------------
// This is the OLD way of writing out the message which uses
// all kinds of crufty old crap for attachments.
// Since we now use Compose to send attachments,
// this is only fallback error stuff.
// Attachments get lost.
if (attachCount) {
lostAttach = PR_TRUE;
attachCount = 0;
}
BOOL needsTerminate = FALSE;
if (!WriteMessage( destOutputStream, &msg, attachCount, &needsTerminate)) {
IMPORT_LOG0( "*** Error writing message\n");
*pAbort = PR_TRUE;
return( NS_ERROR_FAILURE);
}
if (needsTerminate) {
if (!WriteMimeBoundary( destOutputStream, &msg, TRUE)) {
IMPORT_LOG0( "*** Error writing message mime boundary\n");
*pAbort = PR_TRUE;
return( NS_ERROR_FAILURE);
}
}
}
#endif
// Just for YUCKS, let's try an extra endline
WriteData( destOutputStream, "\x0D\x0A", 2);
}
}
return( NS_OK);
}