OSC_ERR OscGpioConfigImageTrigger(enum EnTriggerConfig enConfig)
{
struct GPIO_PIN *pPin = &gpio.pins[PIN_FN_EX_TRIGGER_N];
int ret;
if(enConfig == TRIGGER_INTERNAL)
{
/* Pin is lowactive. */
ret = write(pPin->fd, &on, 1);
} else if(enConfig == TRIGGER_EXTERNAL_IN2)
{
/* Pin is lowactive. */
ret = write(pPin->fd, &off, 1);
} else {
OscLog(ERROR, "%s: Invalid trigger config for this hardware (%d)!\n",
__func__, enConfig);
return -EINVALID_PARAMETER;
}
if(unlikely(ret < 0))
{
OscLog(ERROR, "%s: Error writing to pin %s (%s)\n",
__func__, pPin->pDefConfig->name, strerror(errno));
return -EDEVICE;
}
gpio.enTriggerConfig = enConfig;
return SUCCESS;
}
OSC_ERR OscIpcSetParam(const OSC_IPC_CHAN_ID chanID,
void *pData,
const uint32 paramID,
const uint32 paramSize)
{
struct OSC_IPC_MSG msg;
OSC_ERR err;
msg.enCmd = CMD_WR_PARAM;
msg.paramID = paramID;
msg.paramProp = paramSize;
/* Input validation */
if(unlikely((chanID >= MAX_NR_IPC_CHANNELS) ||
(ipc.arybIpcChansBusy[chanID] == FALSE) ||
(pData == NULL)))
{
OscLog(ERROR, "%s(%d, 0x%x, %u, %u): Invalid parameter!\n",
__func__, chanID, pData, paramID, paramSize);
return -EINVALID_PARAMETER;
}
/* This function only works in blocking mode. */
if(unlikely(ipc.aryIpcChans[chanID].flags & F_IPC_NONBLOCKING))
{
OscLog(ERROR, "%s: Only works in blocking mode!\n", __func__);
return -EBLOCKING_MODE_ONLY;
}
/* Send the message. The server will write the requested
* data directly to the specified data pointer. */
err = OscIpcSendMsg(chanID, &msg);
if(err != SUCCESS)
{
return err;
}
err = OscIpcSend(chanID, pData, paramSize);
if(err != SUCCESS)
{
return err;
}
/* Wait for an acknowledge. As long as the server has not opened
* the other side yet, we will receive -ENO_MSG_AVAIL. */
do
{
err = OscIpcRecvMsg(chanID, &msg);
} while(err == -ENO_MSG_AVAIL);
if(likely(msg.enCmd == CMD_WR_PARAM_ACK))
{
return SUCCESS;
}
else
{
/* NACK */
return -ENEGATIVE_ACKNOWLEDGE;
}
}
void ProcessFrame(uint8 *pRawImg)
{
OSC_ERR err;
enum EnBayerOrder enBayerOrder;
err = OscCamGetBayerOrder(&enBayerOrder, 0, 0);
if (err != SUCCESS)
{
OscLog(ERROR, "%s: Error getting bayer order! (%d)\n", __func__, err);
return;
}
/* Use a framework function to debayer the image. */
err = OscVisDebayer(pRawImg, OSC_CAM_MAX_IMAGE_WIDTH, OSC_CAM_MAX_IMAGE_HEIGHT, enBayerOrder, data.u8ResultImage);
if (err != SUCCESS)
{
OscLog(ERROR, "%s: Error debayering image! (%d)\n", __func__, err);
return;
}
/* - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - */
/* | */
/* | Add your code here */
/* | */
/* - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - */
}
/*********************************************************************//*!
* @brief Checks for IPC events, schedules their handling and
* acknowledges any executed ones.
*
* @param pMainState Initalized HSM main state variable.
* @return 0 on success or an appropriate error code.
*//*********************************************************************/
static OSC_ERR HandleIpcRequests(MainState *pMainState)
{
OSC_ERR err;
uint32 paramId;
err = CheckIpcRequests(¶mId);
if (err == SUCCESS)
{
/* We have a request. See to it that it is handled
* depending on the state we're in. */
switch(paramId)
{
case GET_APP_STATE:
/* Request for the current state of the application. */
ThrowEvent(pMainState, IPC_GET_APP_STATE_EVT);
break;
case GET_COLOR_IMG:
/* Request for the live image. */
ThrowEvent(pMainState, IPC_GET_COLOR_IMG_EVT);
break;
case GET_RAW_IMG:
/* Request for the live image. */
ThrowEvent(pMainState, IPC_GET_RAW_IMG_EVT);
break;
case SET_CAPTURE_MODE:
/* Set the debayering option. */
ThrowEvent(pMainState, IPC_SET_CAPTURE_MODE_EVT);
break;
default:
OscLog(ERROR, "%s: Unkown IPC parameter ID (%d)!\n", __func__, paramId);
data.ipc.enReqState = REQ_STATE_NACK_PENDING;
break;
}
}
else if (err == -ENO_MSG_AVAIL)
{
/* No new message available => do nothing. */
}
else
{
/* Error.*/
OscLog(ERROR, "%s: IPC request error! (%d)\n", __func__, err);
return err;
}
/* Try to acknowledge the new or any old unacknowledged
* requests. It may take several tries to succeed.*/
err = AckIpcRequests();
if (err != SUCCESS)
{
OscLog(ERROR, "%s: IPC acknowledge error! (%d)\n", __func__, err);
}
return err;
}
Msg const *MainState_idle(MainState *me, Msg *msg)
{
switch (msg->evt)
{
case ENTRY_EVT:
OscLog(INFO, "Enter idle mode.\n");
#ifndef HAS_CPLD
/* Set onboard LED green */
OscGpioSetTestLed( TRUE);
OscGpioSetTestLedColor(FALSE, TRUE); /* R, G*/
#endif /* !HAS_CPLD */
return 0;
case FRAMESEQ_EVT:
/* Sleep here for a short while in order not to violate the vertical
* blank time of the camera sensor when triggering a new image
* right after receiving the old one. This can be removed if some
* heavy calculations are done here. */
usleep(1000);
return 0;
case FRAMEPAR_EVT:
return 0;
case CMD_GO_IDLE_EVT:
data.comm.enReqState = REQ_STATE_ACK_PENDING;
return 0;
case CMD_GO_ACQ_EVT:
if(data.enTriggerMode == TRIG_MODE_INTERNAL)
{
STATE_TRAN(me, &me->internal);
} else if(data.enTriggerMode == TRIG_MODE_EXTERNAL)
{
STATE_TRAN(me, &me->external);
} else {
OscLog(ERROR, "%d: Invalid trigger mode configured (%d)!\n",
__func__, data.enTriggerMode);
data.comm.enReqState = REQ_STATE_NACK_PENDING;
return 0;
}
data.comm.enReqState = REQ_STATE_ACK_PENDING;
return 0;
case CMD_USE_INTERN_TRIGGER_EVT:
/* Switch state to internal capturing mode. */
data.enTriggerMode = TRIG_MODE_INTERNAL;
data.comm.enReqState = REQ_STATE_ACK_PENDING;
return 0;
case CMD_USE_EXTERN_TRIGGER_EVT:
/* Switch state to external capturing mode. */
data.enTriggerMode = TRIG_MODE_EXTERNAL;
data.comm.enReqState = REQ_STATE_ACK_PENDING;
return 0;
}
return msg;
}
OSC_ERR OscGpioSetTestLedColor(uint8 red, uint8 green)
{
int ret;
struct GPIO_PIN *pRed = &gpio.pins[PIN_TESTLED_R_N];
struct GPIO_PIN *pGreen = &gpio.pins[PIN_TESTLED_G_N];
bool bRedOn, bGreenOn;
bool bRedPolarity, bGreenPolarity;
bRedPolarity = ((pRed->flags & POL_LOWACTIVE) != 0);
bGreenPolarity = ((pGreen->flags & POL_LOWACTIVE) != 0);
bRedOn = (red ? TRUE : FALSE);
bGreenOn = (green ? TRUE : FALSE);
/* Color transitions currently not supported. */
ret = write(pRed->fd, ((bRedOn ^ bRedPolarity) ? &on : &off), 1);
ret |= write(pGreen->fd, ((bGreenOn ^ bGreenPolarity) ? &on : &off), 1);
if(ret < 0)
{
OscLog(ERROR, "%s: Unable to set LED color (%s)\n",
__func__, strerror(errno));
return -EDEVICE;
}
return SUCCESS;
}
OSC_ERR OscGpioWrite(enum EnGpios enGpio, bool bState)
{
struct GPIO_PIN *pPin = &gpio.pins[enGpio];
bool bLowPolarity;
int ret;
if(unlikely(!pPin->fd))
{
OscLog(ERROR, "%s: No file descriptor for pin %d found. "
"This probably "
"means that this GPIO is not available on your "
"hardware platform.", __func__, enGpio);
return -EINVALID_PARAMETER;
}
/* Sanity check */
if(unlikely(!(pPin->flags & DIR_OUTPUT)))
{
OscLog(ERROR, "%s: Cannot write to an input (%s)\n",
__func__, pPin->pDefConfig->name);
return -EINVALID_PARAMETER;
}
if(pPin->flags & FUN_RESERVED)
{
OscLog(WARN, "%s: Pin %s is reserved internally and can not "
"currently be accessed by the application!\n",
__func__, pPin->pDefConfig->name);
return -EDEVICE_BUSY;
}
/* Write to the driver. XOR with the pin polarity to get the correct value to write.*/
bLowPolarity = ((pPin->flags & POL_LOWACTIVE) != 0);
if(bState ^ bLowPolarity)
{
ret = write(pPin->fd, &on, 1);
} else {
ret = write(pPin->fd, &off, 1);
}
if(unlikely(ret < 0))
{
OscLog(ERROR, "%s: Error writing to pin %s (%s)\n",
__func__, pPin->pDefConfig->name, strerror(errno));
return -EDEVICE;
}
return SUCCESS;
}
/*********************************************************************//*!
* @brief Set the parameters for the application supplied by the web
* interface.
*
* @return SUCCESS or an appropriate error code otherwise
*//*********************************************************************/
static OSC_ERR SetOptions()
{
OSC_ERR err;
struct ARGUMENT_DATA *pArgs = &cgi.args;
if (pArgs->bImageType_supplied)
{
err = OscIpcSetParam(cgi.ipcChan, &pArgs->nImageType, SET_IMAGE_TYPE, sizeof(pArgs->nImageType));
if (err != SUCCESS)
{
OscLog(DEBUG, "CGI: Error setting option! (%d)\n", err);
return err;
}
}
if (pArgs->bThreshold_supplied)
{
err = OscIpcSetParam(cgi.ipcChan, &pArgs->nThreshold, SET_THRESHOLD, sizeof(pArgs->nThreshold));
if (err != SUCCESS)
{
OscLog(DEBUG, "CGI: Error setting option! (%d)\n", err);
return err;
}
}
if (pArgs->bExposureTime_supplied)
{
err = OscIpcSetParam(cgi.ipcChan, &pArgs->nExposureTime, SET_EXPOSURE_TIME, sizeof(pArgs->nExposureTime));
if (err != SUCCESS)
{
OscLog(DEBUG, "CGI: Error setting option! (%d)\n", err);
return err;
}
}
if (pArgs->bAddInfo_supplied)
{
err = OscIpcSetParam(cgi.ipcChan, &pArgs->nAddInfo, SET_ADDINFO, sizeof(pArgs->nAddInfo));
if (err != SUCCESS)
{
OscLog(DEBUG, "CGI: Error setting option! (%d)\n", err);
return err;
}
}
return SUCCESS;
}
/*********************************************************************//*!
* @brief Query the current state of the application and see what else
* we need to get from it
*
* Depending on the current state of the application, other additional
* parameters may be queried.
*
* @return SUCCESS or an appropriate error code otherwise
*//*********************************************************************/
static OSC_ERR QueryApp()
{
OSC_ERR err;
struct OSC_PICTURE pic;
/* First, get the current state of the algorithm. */
err = OscIpcGetParam(cgi.ipcChan, &cgi.appState, GET_APP_STATE, sizeof(struct APPLICATION_STATE));
if (err != SUCCESS)
{
/* This request is defined in all states, and thus must succeed. */
OscLog(ERROR, "CGI: Error querying application! (%d)\n", err);
return err;
}
switch(cgi.appState.enAppMode)
{
case APP_OFF:
/* Algorithm is off, nothing else to do. */
break;
case APP_CAPTURE_ON:
if (cgi.appState.bNewImageReady)
{
/* If there is a new image ready, request it from the application. */
err = OscIpcGetParam(cgi.ipcChan, cgi.imgBuf, GET_NEW_IMG, OSC_CAM_MAX_IMAGE_WIDTH/2*OSC_CAM_MAX_IMAGE_HEIGHT/2);
if (err != SUCCESS)
{
OscLog(DEBUG, "CGI: Getting new image failed! (%d)\n", err);
return err;
}
/* Write the image to the RAM file system where it can be picked
* up by the webserver on request from the browser. */
pic.width = OSC_CAM_MAX_IMAGE_WIDTH/2;
pic.height = OSC_CAM_MAX_IMAGE_HEIGHT/2;
pic.type = OSC_PICTURE_GREYSCALE;
pic.data = (void*)cgi.imgBuf;
return OscBmpWrite(&pic, IMG_FN);
}
break;
default:
OscLog(ERROR, "%s: Invalid application mode (%d)!\n", __func__, cgi.appState.enAppMode);
break;
}
return SUCCESS;
}
OSC_ERR OscGpioRead(enum EnGpios enGpio, bool *pbState)
{
struct GPIO_PIN *pPin = &gpio.pins[enGpio];
bool bLowPolarity;
char buf;
int ret;
if(unlikely(!pPin->fd))
{
OscLog(ERROR, "%s: No file descriptor for pin %d found. "
"This probably "
"means that this GPIO is not available on your "
"hardware platform.", __func__, enGpio);
return -EINVALID_PARAMETER;
}
if(pPin->flags & FUN_RESERVED)
{
OscLog(WARN, "%s: Pin %s is reserved internally and can not "
"currently be accessed by the application!\n",
__func__, pPin->pDefConfig->name);
return -EDEVICE_BUSY;
}
/* Read from the driver. */
ret = read(pPin->fd, &buf, 1);
if(unlikely(ret < 0))
{
OscLog(ERROR, "%s: Error reading from pin %s (%s)\n",
__func__, pPin->pDefConfig->name, strerror(errno));
return -EDEVICE;
}
/* Get the current pin polarity and calculate the resulting value*/
bLowPolarity = ((pPin->flags & POL_LOWACTIVE) != 0);
if(buf != off)
{
*pbState = !bLowPolarity;
} else {
*pbState = bLowPolarity;
}
return SUCCESS;
}
/*!
* @brief Program entry
*
* @param argc Command line argument count.
* @param argv Command line argument strings.
* @return 0 on success
*/
int main(const int argc, const char ** argv)
{
OSC_ERR err = SUCCESS;
/* This initializes various parts of the framework and the application. */
err = init(argc, argv);
if (err != SUCCESS)
{
OscLog(ERROR, "%s: Initialization failed!(%d)\n", __func__, err);
return err;
}
OscLog(INFO, "Initialization successful!\n");
/* Calls the main loop. This only returns on an error. */
mainLoop();
/* On an error, we unload the framework, before we exit. */
Unload();
return 0;
}
/*********************************************************************//*!
* @brief Program entry
*
* @param argc Command line argument count.
* @param argv Command line argument strings.
* @return 0 on success
*//*********************************************************************/
int main(const int argc, const char * argv[])
{
OSC_ERR err = SUCCESS;
err = init(argc, argv);
if (err != SUCCESS)
{
OscLog(ERROR, "%s: Initialization failed!(%d)\n", __func__, err);
return err;
}
OscLog(INFO, "Initialization successful.\n");
#ifdef HAS_CPLD
OscLog(INFO, "CPLD Firmware (Version: %d)\n", (int)data.firmwareRevision);
#endif /* HAS_CPLD */
StateControl();
Unload();
return 0;
}
/*********************************************************************//*!
* @brief Program entry
*
* @param argc Command line argument count.
* @param argv Command line argument strings.
* @return 0 on success
*//*********************************************************************/
int main(const int argc, const char * argv[])
{
OSC_ERR err = SUCCESS;
err = init(argc, argv);
if (err != SUCCESS)
{
OscLog(ERROR, "%s: Initialization failed!(%d)\n", __func__, err);
return err;
}
OscLog(INFO, "Initialization successful!\n");
OscLogSetConsoleLogLevel(INFO);
OscLogSetFileLogLevel(WARN);
StateControl();
Unload();
return 0;
}
/*********************************************************************//*!
* @brief Host only: Crop a picture to the specified window.
*
* The contents of the supplied OSC_PICTURE structure are cropped and
* written to pDstBuffer. pPic is not changed.
*
* Host only.
*
* @param pDstBuffer The destination buffer where the cropped image
* is written to.
* @param dstBufferSize Size of above destination buffer.
* @param pPic Picture to be cropped.
* @param pCropWin Window to crop the picture to.
* @return SUCCESS or an appropriate error code otherwise
*//*********************************************************************/
static OSC_ERR OscCamCropPicture(uint8* pDstBuffer,
const uint32 dstBufferSize,
const struct OSC_PICTURE *pPic,
const struct capture_window *pCropWin)
{
uint8 *pTSrc, *pTDst;
uint32 croppedSize;
uint16 colorDepth, bytesPerPixel;
uint32 y;
uint32 lowY, highY;
/* Input validation */
if((pPic == NULL) || (pPic->data == NULL) || (pCropWin == NULL) ||
(pDstBuffer == NULL) || (dstBufferSize == 0))
{
OscLog(ERROR, "%s(0x%x, %u, 0x%x, 0x%x): Invalid parameter!\n",
__func__, pDstBuffer, dstBufferSize, pPic, pCropWin);
return -EINVALID_PARAMETER;
}
if((pPic->width < (pCropWin->col_off + pCropWin->width)) ||
pPic->height < (pCropWin->row_off + pCropWin->height))
{
OscLog(ERROR,
"%s: Unable to crop image (%dx%d) to (%dx%d @ %d/%d).\n",
__func__, pPic->width, pPic->height,
pCropWin->width, pCropWin->height,
pCropWin->col_off, pCropWin->row_off);
return -EPICTURE_TOO_SMALL;
}
/* Allocate a temporary buffer for the cropped image */
colorDepth = OSC_PICTURE_TYPE_COLOR_DEPTH(pPic->type);
bytesPerPixel = colorDepth / 8;
croppedSize = pCropWin->width * pCropWin->height * bytesPerPixel;
if(croppedSize > dstBufferSize)
{
OscLog(ERROR, "%s: Specified destination Buffer too small. \
(%d < %d)\n", __func__, dstBufferSize, croppedSize);
return -EBUFFER_TOO_SMALL;
}
OSC_ERR OscGpioTriggerImage()
{
int ret;
struct GPIO_PIN *pPin = &gpio.pins[PIN_EXPOSURE];
#ifdef TARGET_TYPE_LEANXCAM
if(gpio.enTriggerConfig != TRIGGER_INTERNAL)
{
/* Don't allow internal triggering if external triggering is configured. */
return -EDEVICE_BUSY;
}
#endif
/* Create a pulse on the Exposure pin of the image sensor. Sensor
* is triggered by rising flank, so high time should not have to
* be too broad.*/
if((pPin->flags & POL_LOWACTIVE) != 0)
{
/* Lowactive */
ret = write(pPin->fd, &off, 1); /* Rising flank */
} else {
ret = write(pPin->fd, &on, 1); /* Rising flank */
}
if(unlikely(ret < 0))
{
goto exit_fail;
}
/* Wait until the pin has been set. */
asm("ssync;\n");
if((pPin->flags & POL_LOWACTIVE) != 0)
{
/* Lowactive */
ret = write(pPin->fd, &on, 1); /* Falling flank */
} else {
ret = write(pPin->fd, &off, 1); /* Falling flank */
}
if(unlikely(ret < 0))
{
goto exit_fail;
}
/* Wait until the pin has been set. */
asm("ssync;\n");
return SUCCESS;
exit_fail:
OscLog(ERROR, "%s: Unable to create trigger pulse (%s)\n",
__func__, strerror(errno));
return -EDEVICE;
}
OSC_ERR SelfTrigger(void)
{
OSC_ERR err;
#ifdef HAS_CPLD
err = OscLgxTriggerImage();
#else
err = OscGpioTriggerImage();
#endif /* HAS_CPLD */
if (err != SUCCESS)
{
OscLog(ERROR, "%s: Unable to trigger capture (%d)!\n", __func__, err);
}
return err;
}
OSC_ERR OscGpioSetTestLed(bool bOn)
{
int ret;
struct GPIO_PIN *pPin = &gpio.pins[PIN_TESTLED_N];
ret = write(pPin->fd, (bOn ? &on : &off), 1);
if(ret < 0)
{
OscLog(ERROR, "%s: Unable to set LED (%s)\n",
__func__, strerror(errno));
return -EDEVICE;
}
return SUCCESS;
}
OSC_ERR OscGpioToggleTestLed()
{
int ret;
struct GPIO_PIN *pPin = &gpio.pins[PIN_TESTLED_N];
ret = write(pPin->fd, &toggle, 1);
if(ret < 0)
{
OscLog(ERROR, "%s: Unable to toggle LED (%s)\n",
__func__, strerror(errno));
return -EDEVICE;
}
return SUCCESS;
}
Msg const *MainState_internal(MainState *me, Msg *msg)
{
switch (msg->evt)
{
case ENTRY_EVT:
OscLog(INFO, "Enter internal capture mode.\n");
/* Initiate manual triggering. Target dependet. */
SelfTrigger();
return 0;
case TRIGGER_EVT:
/* Initiate manual triggering. Target dependet. */
SelfTrigger();
return 0;
}
return msg;
}
OSC_ERR OscIpcGetRequest(const OSC_IPC_CHAN_ID chanID,
struct OSC_IPC_REQUEST *pRequest)
{
struct OSC_IPC_MSG msg;
OSC_ERR err;
/* Input validation */
if(unlikely((chanID >= MAX_NR_IPC_CHANNELS) ||
(ipc.arybIpcChansBusy[chanID] == FALSE) ||
(pRequest == NULL)))
{
OscLog(ERROR, "%s(%d, 0x%x): Invalid parameter!\n",
__func__, chanID, pRequest);
return -EINVALID_PARAMETER;
}
err = OscIpcRecvMsg(chanID, &msg);
if(err != SUCCESS)
{
/* Probably -ENO_MSG_AVAILABLE but may also be a
* real error. */
return err;
}
switch(msg.enCmd)
{
case CMD_RD_PARAM:
pRequest->enType = REQ_TYPE_READ;
break;
case CMD_WR_PARAM:
pRequest->enType = REQ_TYPE_WRITE;
break;
default:
/* Must not happen. */
return -EDEVICE;
}
pRequest->pAddr = (void*)msg.paramProp;
pRequest->paramID = msg.paramID;
return SUCCESS;
}
Msg const *MainState_external(MainState *me, Msg *msg)
{
switch (msg->evt)
{
case ENTRY_EVT:
OscLog(INFO, "Enter external capture mode.\n");
#ifdef HAS_CPLD
/* Enable CPLD counter. */
OscCpldFset(OSC_LGX_CLKDELAY, OSC_LGX_CLKDELAY_ENABLE, OSC_LGX_CLKDELAY_ENABLE);
#endif
return 0;
case EXIT_EVT:
#ifdef HAS_CPLD
/* Disable CPLD counter. */
OscCpldFset(OSC_LGX_CLKDELAY, OSC_LGX_CLKDELAY_ENABLE, !OSC_LGX_CLKDELAY_ENABLE);
#endif
return 0;
}
return msg;
}
OSC_ERR OscGpioSetTestLed(bool bOn)
{
int ret;
struct GPIO_PIN *pRed = &gpio.pins[PIN_TESTLED_R_N];
struct GPIO_PIN *pGreen = &gpio.pins[PIN_TESTLED_G_N];
bool bRedPolarity, bGreenPolarity;
bRedPolarity = ((pRed->flags & POL_LOWACTIVE) != 0);
bGreenPolarity = ((pGreen->flags & POL_LOWACTIVE) != 0);
ret = write(pRed->fd, ((bOn ^ bRedPolarity) ? &on : &off), 1);
ret |= write(pGreen->fd, ((bOn ^ bGreenPolarity) ? &on : &off), 1);
if(ret < 0)
{
OscLog(ERROR, "%s: Unable to set LED (%s)\n",
__func__, strerror(errno));
return -EDEVICE;
}
return SUCCESS;
}
/*********************************************************************//*!
* @brief Query the current state of the application and see what else
* we need to get from it
*
* Depending on the current state of the application, other additional
* parameters may be queried.
*
* @return SUCCESS or an appropriate error code otherwise
*//*********************************************************************/
static OSC_ERR QueryApp()
{
OSC_ERR err;
/* First, get the current state of the algorithm. */
err = OscIpcGetParam(cgi.ipcChan, &cgi.appState, GET_APP_STATE, sizeof(struct APPLICATION_STATE));
if (err != SUCCESS)
{
/* This request is defined in all states, and thus must succeed. */
OscLog(ERROR, "CGI: Error querying application! (%d)\n", err);
return err;
}
switch(cgi.appState.enAppMode)
{
case APP_OFF:
/* Algorithm is off, nothing else to do. */
break;
case APP_CAPTURE_ON:
if (cgi.appState.bNewImageReady)
{
FILE* F;
uint16 r,c;
uint8* pData;
uint32 dataSiz, i;
uint16 oType;
/* If there is a new image ready, request it from the application. */
/* We get TWICE the size of an image because metadata might be available */
err = OscIpcGetParam(cgi.ipcChan, cgi.imgBuf, GET_NEW_IMG, NUM_COLORS*nc*nr*2);
if (err != SUCCESS)
{
OscLog(DEBUG, "CGI: Getting new image failed! (%d)\n", err);
return err;
}
//we have to take care of the different ways gdlib treats gray and color data
#if NUM_COLORS == 1
//create gd image and ...
gdImagePtr im_out = gdImageCreate(nc, nr);
//initialize with sensor image
for(r = 0; r < nr; r++)
{
//in case the original image should not be modified replace the following loop by the memcpy statement
//memcpy(im_out->pixels[r], cgi.imgBuf+r*nc, nc*sizeof(uint8));
for(c = 0; c < nc; c++)
{
im_out->pixels[r][c] = (*(cgi.imgBuf+r*nc+c) & 0xfe);//mask out first bit -> only even gray values
}
}
//allocate color palette (255 is red -> we did not change the sensor image!! should rather use a LUT)
for(c = 0; c < 256; c++)
{
if((c%2) && c > 255-2*MAX_NUM_COLORS){
i = (255-c)/2;
gdImageColorAllocate (im_out, colorLUT[i][0], colorLUT[i][1], colorLUT[i][2]);
} else {
gdImageColorAllocate (im_out, c, c, c);
}
}
#else
//create gd image and ...
gdImagePtr im_out = gdImageCreateTrueColor(nc, nr);
//initialize with sensor image
for(r = 0; r < nr; r++)
{
for(c = 0; c < nc; c++)
{
uint8* p = (cgi.imgBuf+r*3*nc+3*c);
im_out->tpixels[r][c] = gdTrueColor(p[2], p[1], p[0]);
}
}
#endif
//there might be additional data to be written to image
pData = (uint8*) (cgi.imgBuf+NUM_COLORS*nc*nr);
memcpy(&dataSiz, pData, sizeof(uint32));
//OscLog(DEBUG, "received %d number of bytes\n", dataSiz);
pData += sizeof(uint32);//skip dataSiz
if(dataSiz)
{
i = 0;
while(i < dataSiz)
{
memcpy(&oType, pData+i, sizeof(uint16));
i += sizeof(uint16);
switch(oType) {
case OBJ_LINE:
{
struct IMG_LINE imgLine;
memcpy(&imgLine, pData+i, sizLine);
i += sizLine;
//OscLog(DEBUG, "received line (%d,%d)-(%d,%d), color(%d)\n", imgLine.x1, imgLine.y1, imgLine.x2, imgLine.y2, (int) imgLine.color);
gdImageLine(im_out, imgLine.x1, imgLine.y1, imgLine.x2, imgLine.y2, colorLoolUp(imgLine.color));
break;
}
case OBJ_RECT:
{
struct IMG_RECT imgRect;
memcpy(&imgRect, pData+i, sizRect);
i += sizRect;
//OscLog(DEBUG, "received rect (%d,%d)-(%d,%d), %s, color(%d)\n", imgRect.left, imgRect.bottom, imgRect.right, imgRect.top, imgRect.recFill ? "fill" : "not fill", (int) imgRect.color);
if(imgRect.recFill) {
gdImageFilledRectangle(im_out, imgRect.left, imgRect.bottom, imgRect.right, imgRect.top, colorLoolUp(imgRect.color));
} else {
gdImageRectangle(im_out, imgRect.left, imgRect.bottom, imgRect.right, imgRect.top, colorLoolUp(imgRect.color));
}
break;
}
case OBJ_STRING:
{
gdFontPtr font = gdFontSmall;
struct IMG_STRING imgString;
memcpy(&imgString, pData+i, sizString);
i += sizString;
//OscLog(DEBUG, "received string (%d,%d), font %d, %s, color(%d)\n", imgString.xPos, imgString.yPos, imgString.font, pData+i, imgString.color);
switch(imgString.font)
{
case GIANT:
font = gdFontGiant;
break;
case LARGE:
font = gdFontLarge;
break;
case MEDIUMBOLD:
font = gdFontMediumBold;
break;
case SMALL:
font = gdFontSmall;
break;
case TINY:
font = gdFontTiny;
break;
default:
break;//set in definition of font
}
gdImageString(im_out, font, imgString.xPos, imgString.yPos, pData+i, colorLoolUp(imgString.color));
i += imgString.len;
}
}
}
}
F = fopen(IMG_FN, "wb");
//gdImageGif(im_out, F);
gdImageJpeg(im_out, F, 80);
fclose(F);
gdImageDestroy(im_out);
return SUCCESS;
}
break;
default:
OscLog(ERROR, "%s: Invalid application mode (%d)!\n", __func__, cgi.appState.enAppMode);
break;
}
return SUCCESS;
}
OSC_ERR SetConfigRegister(void *pMainState, struct CBP_PARAM *pReg)
{
OSC_ERR err;
struct CFG_KEY configKey;
struct CFG_VAL_STR strCfg;
struct MainState *pHsm = (struct MainState *)pMainState;
#ifdef HAS_CPLD
uint8 cpldReg;
int exposureDelay;
#endif /* HAS_CPLD */
#ifdef UNSUPPORTED
int i;
#endif /* UNSUPPORTED */
switch(pReg->id)
{
case REG_ID_AQUISITION_MODE:
if(pReg->val == 0)
{
ThrowEvent(pHsm, CMD_GO_IDLE_EVT);
break;
}
if(pReg->val == 1)
{
ThrowEvent(pHsm, CMD_GO_ACQ_EVT);
break;
}
return -EUNSUPPORTED;
case REG_ID_TRIGGER_MODE:
if(pReg->val == 0)
{
ThrowEvent(pHsm, CMD_USE_INTERN_TRIGGER_EVT);
break;
}
if(pReg->val == 1)
{
ThrowEvent(pHsm, CMD_USE_EXTERN_TRIGGER_EVT);
break;
}
return -EUNSUPPORTED;
case REG_ID_EXP_TIME:
/* Apply exposure time and store to configuration. */
data.exposureTime = pReg->val;
/* Apply value */
err = OscCamSetShutterWidth( data.exposureTime);
if( err != SUCCESS)
{
OscLog(ERROR, "%s: Failed to modify exposure time! (%d)\n", __func__, err);
break;
}
OscLog(INFO, "%s: Exposure time stored and applied to %d us\n", __func__, data.exposureTime);
/* Store to configuration. */
configKey.strSection = NULL;
configKey.strTag = "EXP";
sprintf(strCfg.str, "%ld", data.exposureTime);
err = OscCfgSetStr( data.hConfig,
&configKey,
strCfg.str);
err |= OscCfgFlushContent(data.hConfig);
return err;
#ifdef UNSUPPORTED
/* This code is not yet ported to the new communication scheme and
thus unsupported. */
case REG_ID_MAC_ADDR:
/* Store Mac/Ip persistent. Applied on next reboot. */
for (i=0; i<6; i++)
{
macAddr[i] = (uint8)data.cmdpkt.data[i];
}
/* Compose strings */
sprintf(strMac, "%02x:%02x:%02x:%02x:%02x:%02x",
macAddr[0], macAddr[1],
macAddr[2], macAddr[3],
macAddr[4], macAddr[5]);
OscLog(INFO, "Set MAC addr environment variable: %s (one time programmable)\n",strMac);
/* Write to persistent u-boot environment ethaddr. */
pF = fopen("/tmp/mac", "w");
fprintf(pF, "%s", strMac);
fflush(pF);
fclose(pF);
system("fw_setenv ethaddr `more /tmp/mac`");
case CmdPerspective:
/* Apply perspective setting and store to configuration */
data.perspective = (enum EnOscCamPerspective)data.cmdpkt.data[0];
/* Apply to sensor */
err = OscCamSetupPerspective( data.perspective);
/* Store to configuration */
configKey.strSection = NULL;
configKey.strTag = "PER";
err = OscCamPerspectiveEnum2Str( data.perspective, strCfg.str);
err = OscCfgSetStr( data.hConfig,
&configKey,
strCfg.str);
err |= OscCfgFlushContent(data.hConfig);
break;
#endif /* UNSUPPORTED */
return -EUNSUPPORTED;
#ifdef HAS_CPLD
case REG_ID_EXP_DELAY:
/* Apply exposure delay to CPLD. Keep enable bit as currently set. */
exposureDelay = pReg->val;
if (exposureDelay > 99)
{
OscLog(ERROR, "Invalid exposure delay value (%d). Valid range: 0..99\n",
exposureDelay);
return -EINVALID_PARAMETER;
}
/* Store to data struct */
data.exposureDelay = exposureDelay;
/* Apply to CPLD. Preserve current enable bit state. */
err = OscCpldRget(OSC_LGX_CLKDELAY, &cpldReg);
cpldReg = OSC_LGX_CLKDELAY_ENABLE;
if( cpldReg & OSC_LGX_CLKDELAY_ENABLE)
{
cpldReg = exposureDelay | OSC_LGX_CLKDELAY_ENABLE;
}
else
{
cpldReg = exposureDelay;
}
err |= OscCpldRset(OSC_LGX_CLKDELAY, cpldReg);
if( err != SUCCESS)
{
OscLog(ERROR, "%s: Failed to apply exposure delay to CPLD!\n", __func__);
return err;
}
OscLog(INFO, "%s: Exposure applied to CPLD: %d fine clocks.\n", __func__, data.exposureDelay);
return SUCCESS;
case REG_ID_STORE_CUR_EXP_DELAY:
/* Read current fine clock position from CPLD. Store this offset in
* configuration and apply to CPLD exposure delay. */
err = OscCpldRget(OSC_LGX_FASTCLKCOUNT, &cpldReg);
exposureDelay = cpldReg;
/* Value 0 is reserved with the current CPLD version */
if( 0 == exposureDelay)
{
exposureDelay++;
}
OscLog(INFO, "%s: Read current fine clock position from CPLD: %d\n", __func__, exposureDelay);
/* Store exposure delay to configuration. */
configKey.strSection = NULL;
configKey.strTag = "DEL";
sprintf(strCfg.str, "%d", exposureDelay);
err = OscCfgSetStr( data.hConfig,
&configKey,
strCfg.str);
err |= OscCfgFlushContent(data.hConfig);
if( err != SUCCESS)
{
OscLog(ERROR, "%s: Failed to store exposure delay to configuration!\n", __func__);
break;
}
OscLog(INFO, "%s: Exposure delay stored to configuration: %d fine clocks.\n", __func__, exposureDelay);
/* Apply delay to CPLD. Preserve the current enable bit state */
err = OscCpldRget(OSC_LGX_CLKDELAY, &cpldReg);
cpldReg = OSC_LGX_CLKDELAY_ENABLE;
if( cpldReg & OSC_LGX_CLKDELAY_ENABLE)
{
cpldReg = exposureDelay | OSC_LGX_CLKDELAY_ENABLE;
}
else
{
cpldReg = exposureDelay;
}
err |= OscCpldRset(OSC_LGX_CLKDELAY, cpldReg);
if( err != SUCCESS)
{
OscLog(ERROR, "%s: Failed to apply exposure delay to CPLD!\n", __func__);
break;
}
OscLog(INFO, "%s: Exposure applied to CPLD: %d fine clocks.\n", __func__, exposureDelay);
break;
#endif /* HAS_CPLD */
default:
OscLog(WARN, "%s: Invalid register (%#x)!\n", __func__, pReg->id);
return -EUNSUPPORTED;
}
/* Evaluate the success or failure of the commands that invoked the state machine. */
if(data.comm.enReqState == REQ_STATE_ACK_PENDING)
{
/* Success. */
return SUCCESS;
} else if(data.comm.enReqState == REQ_STATE_NACK_PENDING) {
return -EDEVICE;
} else {
OscLog(ERROR, "%s: Change of register %d was not handled by the state machine!\n",
__func__, pReg->id);
return -EDEVICE;
}
}
OSC_ERR StateControl( void)
{
OSC_ERR err;
MainState mainState;
uint8 *pCurRawImg = NULL;
/* Setup main state machine. Start with idle mode. */
MainStateConstruct(&mainState);
HsmOnStart((Hsm *)&mainState);
/*----------- infinite main loop */
while( TRUE)
{
/*----------- wait for captured picture */
while (TRUE)
{
/*----------- Alternating a) check for new connections
* b) check for commands (and do process)
* c) check for available picture */
err = Comm_AcceptConnections(&data.comm, ACCEPT_CONNS_TIMEOUT);
if(err != SUCCESS && err != -ETIMEOUT)
{
OscLog(ERROR, "%s: Error accepting new connections (%d)!\n",
__func__, err);
}
err = Comm_HandleCommands(&data.comm, &mainState, GET_CMDS_TIMEOUT);
if(err != SUCCESS && err != -ETIMEOUT)
{
OscLog(ERROR, "%s: Error handling commands (%d)!\n",
__func__, err);
} else if(err == SUCCESS)
{
OscLog(INFO, "Command received.\n");
}
err = OscCamReadPicture(OSC_CAM_MULTI_BUFFER, &pCurRawImg, 0, CAMERA_TIMEOUT);
if ((err != -ETIMEOUT) ||(err != -ENO_CAPTURE_STARTED) )
{
/* Anything other than a timeout or no pending capture means that we should
* stop trying and analyze the situation. */
break;
}
}
if( err == SUCCESS) /* only if breaked due to CamReadPic() */
{
data.pCurRawImg = pCurRawImg;
OscLog(DEBUG, "---image available\n");
}
else
{
pCurRawImg = NULL;
}
/*----------- process frame by state engine (pre-setup) Sequentially with next capture */
if( pCurRawImg)
{
ThrowEvent(&mainState, FRAMESEQ_EVT);
}
/*----------- prepare next capture */
if( pCurRawImg)
{
err = OscCamSetupCapture( OSC_CAM_MULTI_BUFFER);
if (err != SUCCESS)
{
OscLog(ERROR, "%s: Unable to setup capture (%d)!\n", __func__, err);
break;
}
}
/*----------- do self-triggering (if required) */
ThrowEvent(&mainState, TRIGGER_EVT);
/*----------- process frame by state engine (post-setup) Parallel with next capture */
if( pCurRawImg)
{
ThrowEvent(&mainState, FRAMEPAR_EVT);
}
} /* end while ever */
return SUCCESS;
}
Msg const *MainState_capture(MainState *me, Msg *msg)
{
OSC_ERR err;
uint8 *pDummyImg = NULL;
uint32 imgSize;
switch (msg->evt)
{
case ENTRY_EVT:
OscLog(INFO, "Enter generic capture mode.\n");
#ifndef HAS_CPLD
/* Set onboard LED red */
OscGpioSetTestLed( TRUE);
OscGpioSetTestLedColor(TRUE, FALSE); /* R, G*/
#endif /* !HAS_CPLD */
OscLog(INFO, "Setup capture\n");
err = OscCamSetupCapture( OSC_CAM_MULTI_BUFFER);
if (err != SUCCESS)
{
OscLog(ERROR, "%s: Unable to setup initial capture (%d)!\n", __func__, err);
}
return 0;
case FRAMESEQ_EVT:
/* Fill out the feed header. */
data.comm.feedHdr.seqNr++;
/* We need the uptime in milliseconds. */
data.comm.feedHdr.timeStamp = (uint32)(OscSupCycToMilliSecs(OscSupCycGet64()));
data.comm.feedHdr.imgWidth = OSC_CAM_MAX_IMAGE_WIDTH;
data.comm.feedHdr.imgHeight = OSC_CAM_MAX_IMAGE_HEIGHT;
#ifdef TARGET_TYPE_LEANXCAM
data.comm.feedHdr.pixFmt = V4L2_PIX_FMT_GREY;
imgSize = data.comm.feedHdr.imgWidth * data.comm.feedHdr.imgHeight * 1;
#endif /* TARGET_TYPE_LEANXCAM */
#ifdef TARGET_TYPE_INDXCAM
data.comm.feedHdr.pixFmt = V4L2_PIX_FMT_SBGGR8;
imgSize = data.comm.feedHdr.imgWidth * data.comm.feedHdr.imgHeight * 1;
#endif /* TARGET_TYPE_INDXCAM */
/* Send the image to the host. */
Comm_SendImage(&data.comm,
data.pCurRawImg,
imgSize,
&data.comm.feedHdr);
return 0;
case FRAMEPAR_EVT:
return 0;
case CMD_GO_IDLE_EVT:
/* Read picture until no more capture is active.Always use self-trigg*/
err = SUCCESS;
while(err != -ENO_CAPTURE_STARTED)
{
SelfTrigger();
err = OscCamReadPicture(OSC_CAM_MULTI_BUFFER, &pDummyImg, 0, CAMERA_TIMEOUT);
OscLog(DEBUG, "%s: Removed picture from queue! (%d)\n", __func__, err);
}
STATE_TRAN(me, &me->idle);
data.comm.enReqState = REQ_STATE_ACK_PENDING;
return 0;
case CMD_GO_ACQ_EVT:
data.comm.enReqState = REQ_STATE_ACK_PENDING;
return 0;
case CMD_USE_INTERN_TRIGGER_EVT:
case CMD_USE_EXTERN_TRIGGER_EVT:
/* Not supported in acquisition mode. */
data.comm.enReqState = REQ_STATE_NACK_PENDING;
return 0;
case EXIT_EVT:
/* Read picture until no more capture is active. Always use self-trigg*/
err = SUCCESS;
while(err != -ENO_CAPTURE_STARTED)
{
SelfTrigger();
err = OscCamReadPicture(OSC_CAM_MULTI_BUFFER, &pDummyImg, 0, CAMERA_TIMEOUT);
OscLog(DEBUG, "%s: Removed picture from queue! (%d)\n", __func__, err);
}
return 0;
}
return msg;
}
/*********************************************************************//*!
* @brief The main program
*
* Opens the camera and reads pictures as fast as possible
* Makes a debayering of the image
* Writes the debayered image to a buffer which can be read by
* TCP clients on Port 8111. Several concurrent clients are allowed.
* The simplest streaming video client looks like this:
*
* nc 192.168.1.10 8111 | mplayer - -demuxer rawvideo -rawvideo w=376:h=240:format=bgr24:fps=100
*
* Writes every 10th picture to a .jpg file in the Web Server Directory
*//*********************************************************************/
int main(const int argc, const char * argv[])
{
struct OSC_PICTURE calcPic;
struct OSC_PICTURE rawPic;
unsigned char *tmpbuf;
int loops=0;
int numalarm=0;
char filename[100];
initSystem(&sys);
ip_start_server();
/* setup variables */
rawPic.width = OSC_CAM_MAX_IMAGE_WIDTH;
rawPic.height = OSC_CAM_MAX_IMAGE_HEIGHT;
rawPic.type = OSC_PICTURE_GREYSCALE;
/* calcPic width, height etc. are set in the debayering algos */
calcPic.data = malloc(3 * OSC_CAM_MAX_IMAGE_WIDTH * OSC_CAM_MAX_IMAGE_HEIGHT);
if (calcPic.data == 0)
fatalerror("Did not get memory\n");
tmpbuf = malloc(500000);
if (tmpbuf == 0)
fatalerror("Did not get memory\n");
#if defined(OSC_TARGET)
/* Take a picture, first time slower ;-) */
usleep(10000); OscGpioTriggerImage(); usleep(10000);
OscLog(DEBUG,"Triggered CAM ");
#endif
while(true) {
OscCamReadPicture(OSC_CAM_MULTI_BUFFER, (void *) &rawPic.data, 0, 0);
/* Take a picture */
usleep(2000);
OscCamSetupCapture(OSC_CAM_MULTI_BUFFER);
#if defined(OSC_TARGET)
OscGpioTriggerImage();
#else
usleep(10000);
#endif
if (is_alarm(&rawPic)) {
OscGpioSetTestLed(TRUE);
printf("alarm\n");
sprintf(filename, "/home/httpd/alarm_pic%02i.jpg", numalarm%16);
writeJPG(&calcPic, tmpbuf, filename);
numalarm++;
} else {
OscGpioSetTestLed(FALSE);
}
fastdebayerBGR(rawPic, &calcPic, NULL);
ip_send_all((char *)calcPic.data, calcPic.width*calcPic.height*
OSC_PICTURE_TYPE_COLOR_DEPTH(calcPic.type)/8);
loops+=1;
if (loops%20 == 0) {
writeJPG(&calcPic, tmpbuf, "/home/httpd/liveimage.jpg");
}
ip_do_work();
}
ip_stop_server();
cleanupSystem(&sys);
return 0;
} /* main */
/*********************************************************************//*!
* @brief Split the supplied URI string into arguments and parse them.
*
* Matches the argument string with the arguments list (args) and fills in
* their values. Unknown arguments provoke an error, but missing
* arguments are just ignored.
*
* @param strSrc The argument string.
* @param srcLen The length of the argument string.
* @return SUCCESS or an appropriate error code otherwise
*//*********************************************************************/
static OSC_ERR CGIParseArguments()
{
char buffer[1024];
/* Intialize all arguments as 'not supplied' */
for (int i = 0; i < sizeof args / sizeof (struct ARGUMENT); i += 1)
{
*args[i].pbSupplied = false;
}
while (fgets (buffer, sizeof buffer, stdin)) {
struct ARGUMENT *pArg = NULL;
char * key, * value = strchr(buffer, ':');
if (value == NULL) {
OscLog(ERROR, "%s: Invalid line: \"%s\"\n", __func__, buffer);
return -EINVALID_PARAMETER;
}
*value = 0;
value += 1;
key = strtrim(buffer);
value = strtrim(value);
OscLog(INFO, "obtained key: %s, and Value: %s\n", key, value);
for (int i = 0; i < sizeof(args)/sizeof(struct ARGUMENT); i += 1) {
if (strcmp(args[i].strName, key) == 0) {
pArg = args + i;
break;
}
}
if (pArg == NULL) {
OscLog(ERROR, "%s: Unknown argument encountered: \"%s\"\n", __func__, key);
return -EINVALID_PARAMETER;
} else {
if (pArg->enType == STRING_ARG) {
// FIXME: Could someone fix this buffer overflow?
strcpy((char *) pArg->pData, value);
} else if (pArg->enType == INT_ARG) {
if (sscanf(value, "%d", (int *) pArg->pData) != 1) {
OscLog(ERROR, "%s: Unable to parse int value of variable \"%s\" (%s)!\n", __func__, pArg->strName, value);
return -EINVALID_PARAMETER;
}
} else if (pArg->enType == SHORT_ARG) {
if (sscanf(value, "%hd", (short *) pArg->pData) != 1) {
OscLog(ERROR, "%s: Unable to parse short value of variable \"%s\" (%s)!\n", __func__, pArg->strName, value);
return -EINVALID_PARAMETER;
}
} else if (pArg->enType == BOOL_ARG) {
if (strcmp(value, "true") == 0) {
*((bool *) pArg->pData) = true;
} else if (strcmp(value, "false") == 0) {
*((bool *) pArg->pData) = false;
} else {
OscLog(ERROR, "CGI %s: Unable to parse boolean value of variable \"%s\" (%s)!\n", __func__, pArg->strName, value);
return -EINVALID_PARAMETER;
}
}
if (pArg->pbSupplied != NULL)
*pArg->pbSupplied = true;
}
}
return SUCCESS;
}
/*********************************************************************//*!
* @brief Checks for IPC events, schedules their handling and
* acknowledges any executed ones.
*
* @param pMainState Initalized HSM main state variable.
* @return 0 on success or an appropriate error code.
*//*********************************************************************/
static OSC_ERR HandleIpcRequests(MainState *pMainState)
{
OSC_ERR err;
uint32 paramId;
struct IPC_DATA *pIpc = &data.ipc;
struct OSC_IPC_REQUEST *pReq = &pIpc->req;
err = CheckIpcRequests(¶mId);
if (err == SUCCESS)
{
/* We have a request. See to it that it is handled
* depending on the state we're in. */
switch(paramId)
{
case GET_APP_STATE:
/* Request for the current state of the application. */
ThrowEvent(pMainState, IPC_GET_APP_STATE_EVT);
break;
case GET_NEW_IMG:
/* Request for the live image. */
ThrowEvent(pMainState, IPC_GET_NEW_IMG_EVT);
break;
case SET_IMAGE_TYPE:
{
/* Set the new image type. */
unsigned int ImgTyp = *((unsigned int*)data.ipc.req.pAddr);
if(MAX_NUM_IMG <= ImgTyp)
{
OscLog(ERROR, "%obtained unknown image type: %u! Will leave unchanged\n", data.ipc.state.nImageType);
}
else
{
data.ipc.state.nImageType = ImgTyp;
ThrowEvent(pMainState, IPC_SET_IMAGE_TYPE_EVT);
}
break;
}
case SET_EXPOSURE_TIME:
// a new exposure time was given
if(data.ipc.state.nExposureTime != *((int*)pReq->pAddr))
{
data.nExposureTimeChanged = true;
data.ipc.state.nExposureTime = *((int*)pReq->pAddr);
}
data.ipc.enReqState = REQ_STATE_ACK_PENDING;//we return immediately
break;
case SET_THRESHOLD:
// a new exposure time was given
if(data.ipc.state.nThreshold != *((int*)pReq->pAddr))
{
data.ipc.state.nThreshold = *((int*)pReq->pAddr);
}
data.ipc.enReqState = REQ_STATE_ACK_PENDING;//we return immediately
break;
default:
OscLog(ERROR, "%s: Unkown IPC parameter ID (%d)!\n", __func__, paramId);
data.ipc.enReqState = REQ_STATE_NACK_PENDING;
break;
}
}
else if (err == -ENO_MSG_AVAIL)
{
/* No new message available => do nothing. */
}
else
{
/* Error.*/
OscLog(ERROR, "%s: IPC request error! (%d)\n", __func__, err);
return err;
}
/* Try to acknowledge the new or any old unacknowledged
* requests. It may take several tries to succeed.*/
err = AckIpcRequests();
if (err != SUCCESS)
{
OscLog(ERROR, "%s: IPC acknowledge error! (%d)\n", __func__, err);
}
return err;
}
OSC_ERR OscIpcAckRequest(const OSC_IPC_CHAN_ID chanID,
const struct OSC_IPC_REQUEST *pRequest,
const bool bSucceeded)
{
struct OSC_IPC_MSG msg;
OSC_ERR err;
/* Input validation */
if(unlikely((chanID >= MAX_NR_IPC_CHANNELS) ||
(ipc.arybIpcChansBusy[chanID] == FALSE) ||
(pRequest == NULL)))
{
OscLog(ERROR, "%s(%d, 0x%x, %d): Invalid parameter!\n",
__func__, chanID, pRequest, bSucceeded);
return -EINVALID_PARAMETER;
}
/* Fill out the acknowledge message structure */
msg.paramProp = (uint32)pRequest->pAddr;
msg.paramID = pRequest->paramID;
if(likely(bSucceeded == TRUE))
{
switch(pRequest->enType)
{
case REQ_TYPE_READ:
msg.enCmd = CMD_RD_PARAM_ACK;
break;
case REQ_TYPE_WRITE:
msg.enCmd = CMD_WR_PARAM_ACK;
break;
default:
return -EINVALID_PARAMETER;
}
} else {
switch(pRequest->enType)
{
case REQ_TYPE_READ:
msg.enCmd = CMD_RD_PARAM_NACK;
break;
case REQ_TYPE_WRITE:
msg.enCmd = CMD_WR_PARAM_NACK;
break;
default:
return -EINVALID_PARAMETER;
}
}
/* Send the acknowledge. This call may return -ETRY_AGAIN, if
* the client on the other side of the FIFO did not open the
* FIFO for reading yet. We pass it on and leave it to the caller
* to try it again later. */
err = OscIpcSendMsg(chanID, &msg);
if(err != SUCCESS)
{
if(err != -ETRY_AGAIN)
{
OscLog(ERROR, "%s: Failed to send acknowledge! (%d)\n",
__func__, err);
}
return err;
}
return SUCCESS;
}