static int
netxen_nic_get_settings(struct net_device *dev, struct ethtool_cmd *ecmd)
{
struct netxen_adapter *adapter = netdev_priv(dev);
int check_sfp_module = 0;
/* read which mode */
if (adapter->ahw.port_type == NETXEN_NIC_GBE) {
ecmd->supported = (SUPPORTED_10baseT_Half |
SUPPORTED_10baseT_Full |
SUPPORTED_100baseT_Half |
SUPPORTED_100baseT_Full |
SUPPORTED_1000baseT_Half |
SUPPORTED_1000baseT_Full);
ecmd->advertising = (ADVERTISED_100baseT_Half |
ADVERTISED_100baseT_Full |
ADVERTISED_1000baseT_Half |
ADVERTISED_1000baseT_Full);
ecmd->port = PORT_TP;
ecmd->speed = adapter->link_speed;
ecmd->duplex = adapter->link_duplex;
ecmd->autoneg = adapter->link_autoneg;
} else if (adapter->ahw.port_type == NETXEN_NIC_XGBE) {
u32 val;
val = NXRD32(adapter, NETXEN_PORT_MODE_ADDR);
if (val == NETXEN_PORT_MODE_802_3_AP) {
ecmd->supported = SUPPORTED_1000baseT_Full;
ecmd->advertising = ADVERTISED_1000baseT_Full;
} else {
ecmd->supported = SUPPORTED_10000baseT_Full;
ecmd->advertising = ADVERTISED_10000baseT_Full;
}
if (netif_running(dev) && adapter->has_link_events) {
ecmd->speed = adapter->link_speed;
ecmd->autoneg = adapter->link_autoneg;
ecmd->duplex = adapter->link_duplex;
goto skip;
}
ecmd->port = PORT_TP;
if (NX_IS_REVISION_P3(adapter->ahw.revision_id)) {
u16 pcifn = adapter->ahw.pci_func;
val = NXRD32(adapter, P3_LINK_SPEED_REG(pcifn));
ecmd->speed = P3_LINK_SPEED_MHZ *
P3_LINK_SPEED_VAL(pcifn, val);
} else
ecmd->speed = SPEED_10000;
ecmd->duplex = DUPLEX_FULL;
ecmd->autoneg = AUTONEG_DISABLE;
} else
return -EIO;
skip:
ecmd->phy_address = adapter->physical_port;
ecmd->transceiver = XCVR_EXTERNAL;
switch (adapter->ahw.board_type) {
case NETXEN_BRDTYPE_P2_SB35_4G:
case NETXEN_BRDTYPE_P2_SB31_2G:
case NETXEN_BRDTYPE_P3_REF_QG:
case NETXEN_BRDTYPE_P3_4_GB:
case NETXEN_BRDTYPE_P3_4_GB_MM:
ecmd->supported |= SUPPORTED_Autoneg;
ecmd->advertising |= ADVERTISED_Autoneg;
case NETXEN_BRDTYPE_P2_SB31_10G_CX4:
case NETXEN_BRDTYPE_P3_10G_CX4:
case NETXEN_BRDTYPE_P3_10G_CX4_LP:
case NETXEN_BRDTYPE_P3_10000_BASE_T:
ecmd->supported |= SUPPORTED_TP;
ecmd->advertising |= ADVERTISED_TP;
ecmd->port = PORT_TP;
ecmd->autoneg = (adapter->ahw.board_type ==
NETXEN_BRDTYPE_P2_SB31_10G_CX4) ?
(AUTONEG_DISABLE) : (adapter->link_autoneg);
break;
case NETXEN_BRDTYPE_P2_SB31_10G_HMEZ:
case NETXEN_BRDTYPE_P2_SB31_10G_IMEZ:
case NETXEN_BRDTYPE_P3_IMEZ:
case NETXEN_BRDTYPE_P3_XG_LOM:
case NETXEN_BRDTYPE_P3_HMEZ:
ecmd->supported |= SUPPORTED_MII;
ecmd->advertising |= ADVERTISED_MII;
ecmd->port = PORT_MII;
ecmd->autoneg = AUTONEG_DISABLE;
break;
case NETXEN_BRDTYPE_P3_10G_SFP_PLUS:
case NETXEN_BRDTYPE_P3_10G_SFP_CT:
case NETXEN_BRDTYPE_P3_10G_SFP_QT:
ecmd->advertising |= ADVERTISED_TP;
ecmd->supported |= SUPPORTED_TP;
check_sfp_module = netif_running(dev) &&
adapter->has_link_events;
case NETXEN_BRDTYPE_P2_SB31_10G:
case NETXEN_BRDTYPE_P3_10G_XFP:
ecmd->supported |= SUPPORTED_FIBRE;
ecmd->advertising |= ADVERTISED_FIBRE;
ecmd->port = PORT_FIBRE;
ecmd->autoneg = AUTONEG_DISABLE;
break;
case NETXEN_BRDTYPE_P3_10G_TP:
if (adapter->ahw.port_type == NETXEN_NIC_XGBE) {
ecmd->autoneg = AUTONEG_DISABLE;
ecmd->supported |= (SUPPORTED_FIBRE | SUPPORTED_TP);
ecmd->advertising |=
(ADVERTISED_FIBRE | ADVERTISED_TP);
ecmd->port = PORT_FIBRE;
check_sfp_module = netif_running(dev) &&
adapter->has_link_events;
} else {
ecmd->autoneg = AUTONEG_ENABLE;
ecmd->supported |= (SUPPORTED_TP |SUPPORTED_Autoneg);
ecmd->advertising |=
(ADVERTISED_TP | ADVERTISED_Autoneg);
ecmd->port = PORT_TP;
}
break;
default:
printk(KERN_ERR "netxen-nic: Unsupported board model %d\n",
adapter->ahw.board_type);
return -EIO;
}
if (check_sfp_module) {
switch (adapter->module_type) {
case LINKEVENT_MODULE_OPTICAL_UNKNOWN:
case LINKEVENT_MODULE_OPTICAL_SRLR:
case LINKEVENT_MODULE_OPTICAL_LRM:
case LINKEVENT_MODULE_OPTICAL_SFP_1G:
ecmd->port = PORT_FIBRE;
break;
case LINKEVENT_MODULE_TWINAX_UNSUPPORTED_CABLE:
case LINKEVENT_MODULE_TWINAX_UNSUPPORTED_CABLELEN:
case LINKEVENT_MODULE_TWINAX:
ecmd->port = PORT_TP;
break;
default:
ecmd->port = -1;
}
}
return 0;
}
static int
netxen_nic_get_settings(struct net_device *dev, struct ethtool_cmd *ecmd)
{
struct netxen_adapter *adapter = netdev_priv(dev);
struct netxen_board_info *boardinfo = &adapter->ahw.boardcfg;
/* read which mode */
if (adapter->ahw.board_type == NETXEN_NIC_GBE) {
ecmd->supported = (SUPPORTED_10baseT_Half |
SUPPORTED_10baseT_Full |
SUPPORTED_100baseT_Half |
SUPPORTED_100baseT_Full |
SUPPORTED_1000baseT_Half |
SUPPORTED_1000baseT_Full);
ecmd->advertising = (ADVERTISED_100baseT_Half |
ADVERTISED_100baseT_Full |
ADVERTISED_1000baseT_Half |
ADVERTISED_1000baseT_Full);
ecmd->port = PORT_TP;
ecmd->speed = adapter->link_speed;
ecmd->duplex = adapter->link_duplex;
ecmd->autoneg = adapter->link_autoneg;
} else if (adapter->ahw.board_type == NETXEN_NIC_XGBE) {
u32 val;
adapter->hw_read_wx(adapter, NETXEN_PORT_MODE_ADDR, &val, 4);
if (val == NETXEN_PORT_MODE_802_3_AP) {
ecmd->supported = SUPPORTED_1000baseT_Full;
ecmd->advertising = ADVERTISED_1000baseT_Full;
} else {
ecmd->supported = SUPPORTED_10000baseT_Full;
ecmd->advertising = ADVERTISED_10000baseT_Full;
}
ecmd->port = PORT_TP;
if (NX_IS_REVISION_P3(adapter->ahw.revision_id)) {
u16 pcifn = adapter->ahw.pci_func;
adapter->hw_read_wx(adapter,
P3_LINK_SPEED_REG(pcifn), &val, 4);
ecmd->speed = P3_LINK_SPEED_MHZ *
P3_LINK_SPEED_VAL(pcifn, val);
} else
ecmd->speed = SPEED_10000;
ecmd->duplex = DUPLEX_FULL;
ecmd->autoneg = AUTONEG_DISABLE;
} else
return -EIO;
ecmd->phy_address = adapter->physical_port;
ecmd->transceiver = XCVR_EXTERNAL;
switch ((netxen_brdtype_t) boardinfo->board_type) {
case NETXEN_BRDTYPE_P2_SB35_4G:
case NETXEN_BRDTYPE_P2_SB31_2G:
case NETXEN_BRDTYPE_P3_REF_QG:
case NETXEN_BRDTYPE_P3_4_GB:
case NETXEN_BRDTYPE_P3_4_GB_MM:
ecmd->supported |= SUPPORTED_Autoneg;
ecmd->advertising |= ADVERTISED_Autoneg;
case NETXEN_BRDTYPE_P2_SB31_10G_CX4:
case NETXEN_BRDTYPE_P3_10G_CX4:
case NETXEN_BRDTYPE_P3_10G_CX4_LP:
case NETXEN_BRDTYPE_P3_10000_BASE_T:
ecmd->supported |= SUPPORTED_TP;
ecmd->advertising |= ADVERTISED_TP;
ecmd->port = PORT_TP;
ecmd->autoneg = (boardinfo->board_type ==
NETXEN_BRDTYPE_P2_SB31_10G_CX4) ?
(AUTONEG_DISABLE) : (adapter->link_autoneg);
break;
case NETXEN_BRDTYPE_P2_SB31_10G_HMEZ:
case NETXEN_BRDTYPE_P2_SB31_10G_IMEZ:
case NETXEN_BRDTYPE_P3_IMEZ:
case NETXEN_BRDTYPE_P3_XG_LOM:
case NETXEN_BRDTYPE_P3_HMEZ:
ecmd->supported |= SUPPORTED_MII;
ecmd->advertising |= ADVERTISED_MII;
ecmd->port = PORT_FIBRE;
ecmd->autoneg = AUTONEG_DISABLE;
break;
case NETXEN_BRDTYPE_P3_10G_SFP_PLUS:
case NETXEN_BRDTYPE_P3_10G_SFP_CT:
case NETXEN_BRDTYPE_P3_10G_SFP_QT:
ecmd->advertising |= ADVERTISED_TP;
ecmd->supported |= SUPPORTED_TP;
case NETXEN_BRDTYPE_P2_SB31_10G:
case NETXEN_BRDTYPE_P3_10G_XFP:
ecmd->supported |= SUPPORTED_FIBRE;
ecmd->advertising |= ADVERTISED_FIBRE;
ecmd->port = PORT_FIBRE;
ecmd->autoneg = AUTONEG_DISABLE;
break;
case NETXEN_BRDTYPE_P3_10G_TP:
if (adapter->ahw.board_type == NETXEN_NIC_XGBE) {
ecmd->autoneg = AUTONEG_DISABLE;
ecmd->supported |= (SUPPORTED_FIBRE | SUPPORTED_TP);
ecmd->advertising |=
(ADVERTISED_FIBRE | ADVERTISED_TP);
ecmd->port = PORT_FIBRE;
} else {
ecmd->autoneg = AUTONEG_ENABLE;
ecmd->supported |= (SUPPORTED_TP |SUPPORTED_Autoneg);
ecmd->advertising |=
(ADVERTISED_TP | ADVERTISED_Autoneg);
ecmd->port = PORT_TP;
}
break;
default:
printk(KERN_ERR "netxen-nic: Unsupported board model %d\n",
(netxen_brdtype_t) boardinfo->board_type);
return -EIO;
}
return 0;
}
