int
main(void)
{
/* This is where the data files are. Adjust as necessary.*/
const char * searchpath = "../data";
PDF *p;
const char * imagefile = "nesrin.jpg";
char optlist[1024];
int font, image, spot, icc;
/* create a new PDFlib object */
if ((p = PDF_new()) == (PDF *) 0) {
printf("Couldn't create PDFlib object (out of memory)!\n");
return(2);
}
PDF_TRY(p) {
/* This means we must check return values of load_font() etc. */
PDF_set_parameter(p, "errorpolicy", "return");
PDF_set_parameter(p, "SearchPath", searchpath);
if (PDF_begin_document(p, "starter_pdfx.pdf", 0, "pdfx=PDF/X-3:2002")
== -1) {
printf("Error: %s\n", PDF_get_errmsg(p));
PDF_delete(p);
return(2);
}
PDF_set_info(p, "Creator", "PDFlib starter sample");
PDF_set_info(p, "Title", "starter_pdfx");
/*
* You can use one of the Standard output intents (e.g. for SWOP
* printing) which do not require an ICC profile:
PDF_load_iccprofile(p, "CGATS TR 001", 0, "usage=outputintent");
* However, if you use ICC or Lab color you must load an ICC
* profile as output intent:
*/
if (PDF_load_iccprofile(p, "ISOcoated.icc", 0,
"usage=outputintent") == -1)
{
printf("Error: %s\n", PDF_get_errmsg(p));
printf("Please install the ICC profile package from "
"www.pdflib.com to run the PDF/X starter sample.\n");
PDF_delete(p);
return(2);
}
PDF_begin_page_ext(p, 595, 842, "");
/* Font embedding is required for PDF/X */
font = PDF_load_font(p, "LuciduxSans-Oblique", 0,
"winansi", "embedding");
if (font == -1) {
printf("Error: %s\n", PDF_get_errmsg(p));
PDF_delete(p);
return(2);
}
PDF_setfont(p, font, 24);
spot = PDF_makespotcolor(p, "PANTONE 123 C", 0);
PDF_setcolor(p, "fill", "spot", spot, 1.0, 0.0, 0.0);
PDF_fit_textline(p, "PDF/X-3:2002 starter", 0, 50, 700, "");
/* The RGB image below needs an ICC profile; we use sRGB. */
icc = PDF_load_iccprofile(p, "sRGB", 0, "");
sprintf(optlist, "iccprofile=%d", icc);
image = PDF_load_image(p, "auto", imagefile, 0, optlist);
if (image == -1) {
printf("Error: %s\n", PDF_get_errmsg(p));
PDF_delete(p);
return(2);
}
PDF_fit_image(p, image, (float) 0.0, (float) 0.0, "scale=0.5");
PDF_end_page_ext(p, "");
PDF_end_document(p, "");
}
PDF_CATCH(p) {
printf("PDFlib exception occurred:\n");
printf("[%d] %s: %s\n",
PDF_get_errnum(p), PDF_get_apiname(p), PDF_get_errmsg(p));
PDF_delete(p);
return(2);
}
PDF_delete(p);
return 0;
}
int
main(void)
{
/* This is where the data files are. Adjust as necessary.*/
const char * searchpath = "../data";
const char *targetname = "x5target.pdf";
PDF *p;
char optlist[1024];
int font, proxy;
double linewidth=2;
double width, height;
/* create a new PDFlib object */
if ((p = PDF_new()) == (PDF *) 0) {
printf("Couldn't create PDFlib object (out of memory)!\n");
return(2);
}
PDF_TRY(p) {
/* This means we must check return values of load_font() etc. */
PDF_set_parameter(p, "errorpolicy", "return");
PDF_set_parameter(p, "SearchPath", searchpath);
if (PDF_begin_document(p, "starter_pdfx5g.pdf", 0, "pdfx=PDF/X-5g")
== -1) {
printf("Error: %s\n", PDF_get_errmsg(p));
PDF_delete(p);
return(2);
}
PDF_set_info(p, "Creator", "PDFlib starter sample");
PDF_set_info(p, "Title", "starter_pdfx5g");
/* Open the output intent profile */
if (PDF_load_iccprofile(p, "ISOcoated.icc", 0,
"usage=outputintent") == -1)
{
printf("Error: %s\n", PDF_get_errmsg(p));
printf("Please install the ICC profile package from "
"www.pdflib.com to run the PDF/X-5g starter sample.\n");
PDF_delete(p);
return(2);
}
/* Font embedding is required for PDF/X */
font = PDF_load_font(p, "LuciduxSans-Oblique", 0,
"winansi", "embedding");
if (font == -1) {
printf("Error: %s\n", PDF_get_errmsg(p));
PDF_delete(p);
return(2);
}
/* Create a template which will serve as proxy. The referenced
* page (the target) is attached to the proxy.
* The template width and height will be determined automatically,
* so we don't have to supply them.
*/
sprintf(optlist, "reference={filename=%s pagenumber=1}", targetname);
proxy = PDF_begin_template_ext(p, 0, 0, optlist);
if (proxy == -1)
{
printf("Error: %s\n", PDF_get_errmsg(p));
PDF_delete(p);
return(2);
}
width = PDF_info_image(p, proxy, "imagewidth", "");
height = PDF_info_image(p, proxy, "imageheight", "");
/* Draw a crossed-out rectangle to visualize the proxy.
* Attention: if we use the exact corner points, one half of the
* linewidth would end up outside the template, and therefore be
* clipped.
*/
PDF_setlinewidth(p, linewidth);
PDF_moveto(p, linewidth/2, linewidth/2);
PDF_lineto(p, width-linewidth/2, linewidth/2);
PDF_lineto(p, width-linewidth/2, height-linewidth/2);
PDF_lineto(p, linewidth/2, height-linewidth/2);
PDF_lineto(p, linewidth/2, linewidth/2);
PDF_lineto(p, width-linewidth/2, height-linewidth/2);
PDF_moveto(p, width-linewidth/2, linewidth/2);
PDF_lineto(p, linewidth/2, height-linewidth/2);
PDF_stroke(p);
PDF_setfont(p, font, 24);
sprintf(optlist, "fitmethod=auto position=center boxsize={%f %f}",
width, height);
PDF_fit_textline(p, "Proxy replaces target here", 0,
0, 0, optlist);
PDF_end_template_ext(p, 0, 0);
/* Create the page */
PDF_begin_page_ext(p, 595, 842, "");
PDF_setfont(p, font, 18);
PDF_fit_textline(p,
"PDF/X-5 starter sample with reference to an external page", 0,
50, 700, "");
/* Place the proxy on the page */
PDF_fit_image(p, proxy, 50, 50, "boxsize={500 500} fitmethod=meet");
PDF_end_page_ext(p, "");
PDF_end_document(p, "");
}
PDF_CATCH(p) {
printf("PDFlib exception occurred:\n");
printf("[%d] %s: %s\n",
PDF_get_errnum(p), PDF_get_apiname(p), PDF_get_errmsg(p));
PDF_delete(p);
return(2);
}
PDF_delete(p);
return 0;
}
int
main(void)
{
/* This is where the data files are. Adjust as necessary. */
const char* searchpath = "../data";
const char* outfile = "starter_layer.pdf";
PDF * p;
const char* rgb = "nesrin.jpg";
const char* gray = "nesrin_gray.jpg";
#define BUFLEN 1024
char buf[BUFLEN];
int font, imageRGB, imageGray, layerRGB, layerGray, layerEN, layerDE;
/* create a new PDFlib object */
if ((p = PDF_new()) == (PDF *) 0) {
printf("Couldn't create PDFlib object (out of memory)!\n");
return(2);
}
PDF_TRY(p) {
PDF_set_parameter(p, "SearchPath", searchpath);
/* This means we must check return values of load_font() etc. */
PDF_set_parameter(p, "errorpolicy", "return");
/* Open the document with the "Layers" navigation tab visible */
if (PDF_begin_document(p, outfile, 0, "openmode=layers") == -1) {
printf("Error: %s\n", PDF_get_errmsg(p));
PDF_delete(p);
return(2);
}
PDF_set_info(p, "Creator", "PDFlib starter sample");
PDF_set_info(p, "Title", "starter_layer");
/* Load the font */
font = PDF_load_font(p, "Helvetica", 0, "winansi", "");
if (font == -1) {
printf("Error: %s\n", PDF_get_errmsg(p));
PDF_delete(p);
return(2);
}
/* Load the Grayscale image */
imageGray = PDF_load_image(p, "auto", gray, 0, "");
if (imageGray == -1) {
printf("Error: %s\n", PDF_get_errmsg(p));
PDF_delete(p);
return(2);
}
/* Load the RGB image */
imageRGB = PDF_load_image(p, "auto", rgb, 0, "");
if (imageRGB == -1) {
printf("Error: %s\n", PDF_get_errmsg(p));
PDF_delete(p);
return(2);
}
/*
* Define all layers which will be used, and their relationships.
* This should be done before the first page if the layers are
* used on more than one page.
*/
/* Define the layer "RGB" */
layerRGB = PDF_define_layer(p, "RGB", 0, "");
/* Define the layer "Grayscale" which is hidden when opening the
* document or printing it. */
layerGray = PDF_define_layer(p, "Grayscale", 0,
"initialviewstate=false initialprintstate=false");
/* At most one of the "Grayscale" and "RGB" layers should be visible */
sprintf(buf, "group={%d %d}", layerGray, layerRGB);
PDF_set_layer_dependency(p, "Radiobtn", buf);
/* Define the layer "English" */
layerEN = PDF_define_layer(p, "English", 0, "");
/* Define the layer "German" which is hidden when opening the document
* or printing it. */
layerDE = PDF_define_layer(p, "German", 0,
"initialviewstate=false initialprintstate=false");
/* At most one of the "English" and "German" layers should be visible */
sprintf(buf, "group={%d %d}", layerEN, layerDE);
PDF_set_layer_dependency(p, "Radiobtn", buf);
/* Start page */
PDF_begin_page_ext(p, 0, 0, "width=a4.width height=a4.height");
/* Place the RGB image on the layer "RGB" */
PDF_begin_layer(p, layerRGB);
PDF_fit_image(p, imageRGB, 100, 400,
"boxsize={400 300} fitmethod=meet");
/* Place the Grayscale image on the layer "Grayscale" */
PDF_begin_layer(p, layerGray);
PDF_fit_image(p, imageGray, 100, 400,
"boxsize={400 300} fitmethod=meet");
/* Place an English image caption on the layer "English" */
PDF_begin_layer(p, layerEN);
sprintf(buf, "font=%d fontsize=20", font);
PDF_fit_textline(p, "This is the Nesrin image.", 0, 100, 370, buf);
/* Place a German image caption on the layer "German". */
PDF_begin_layer(p, layerDE);
sprintf(buf, "font=%d fontsize=20", font);
PDF_fit_textline(p, "Das ist das Nesrin-Bild.", 0, 100, 370, buf);
PDF_end_layer(p);
PDF_end_page_ext(p, "");
PDF_end_document(p, "");
}
PDF_CATCH(p) {
printf("PDFlib exception occurred:\n");
printf("[%d] %s: %s\n",
PDF_get_errnum(p), PDF_get_apiname(p), PDF_get_errmsg(p));
PDF_delete(p);
return(2);
}
PDF_delete(p);
return 0;
}