/*****************************************************************************
*
* toggleLeds - Changes the LED state of an adapter
*
* Description:
* This function changes the current state of all LEDs of an adapter so
* that it can be located by a user. If the requested time interval for
* this test has elapsed, this function cleans up everything that was
* temporarily setup during the locate NIC test. This involves of course
* also closing or opening any adapter so that the initial board state
* is recovered.
*
* Returns: N/A
*
*/
static void toggleLeds(
unsigned long ptr) /* holds the pointer to adapter control context */
{
DEV_NET *pNet = (DEV_NET*) ptr;
SK_AC *pAC = pNet->pAC;
int port = pNet->PortNr;
SK_IOC IoC = pAC->IoBase;
struct SK_NET_DEVICE *pDev = pAC->dev[port];
int OtherPort = (port) ? 0 : 1;
struct SK_NET_DEVICE *pOtherDev = pAC->dev[OtherPort];
SK_U16 PageSelect;
SK_BOOL YukLedState;
SK_U16 YukLedOn = (PHY_M_LED_MO_DUP(MO_LED_ON) |
PHY_M_LED_MO_10(MO_LED_ON) |
PHY_M_LED_MO_100(MO_LED_ON) |
PHY_M_LED_MO_1000(MO_LED_ON) |
PHY_M_LED_MO_RX(MO_LED_ON));
SK_U16 YukLedOff = (PHY_M_LED_MO_DUP(MO_LED_OFF) |
PHY_M_LED_MO_10(MO_LED_OFF) |
PHY_M_LED_MO_100(MO_LED_OFF) |
PHY_M_LED_MO_1000(MO_LED_OFF) |
PHY_M_LED_MO_RX(MO_LED_OFF) |
PHY_M_LED_MO_TX(MO_LED_OFF));
nbrBlinkQuarterSeconds--;
if (nbrBlinkQuarterSeconds <= 0) {
/*
* We have to stop the device again in case the device has no
* been up.
*/
if (!boardWasDown[0]) {
/*
* The board is already up as we bring it up in case it is not.
*/
} else {
#if LINUX_VERSION_CODE > KERNEL_VERSION(2,6,29)
(*pDev->netdev_ops->ndo_stop)(pDev);
#else
(*pDev->stop)(pDev);
#endif
}
if (isDualNetCard) {
if (!boardWasDown[1]) {
/*
* The board is already up as we bring it up in case it is not.
*/
} else {
#if LINUX_VERSION_CODE > KERNEL_VERSION(2,6,29)
(*pOtherDev->netdev_ops->ndo_stop)(pOtherDev);
#else
(*pOtherDev->stop)(pOtherDev);
#endif
}
}
isDualNetCard = SK_FALSE;
isLocateNICrunning = SK_FALSE;
return;
}
doSwitchLEDsOn = (doSwitchLEDsOn) ? SK_FALSE : SK_TRUE;
if ( (doSwitchLEDsOn) && (nbrBlinkQuarterSeconds > 2) ){
if ( (pAC->GIni.GIChipId == CHIP_ID_YUKON_XL) ||
(pAC->GIni.GIChipId == CHIP_ID_YUKON_2(pAC)) ||
(pAC->GIni.GIChipId == CHIP_ID_YUKON_EC_U) ) {
YukLedOn = 0;
YukLedState = 1;
YukLedOn |= PHY_M_LEDC_INIT_CTRL(YukLedState ? 9 : 8);
YukLedState = 1;
YukLedOn |= PHY_M_LEDC_STA1_CTRL(YukLedState ? 9 : 8);
YukLedState = 1;
YukLedOn |= PHY_M_LEDC_STA0_CTRL(YukLedState ? 9 : 8);
YukLedState = 1;
YukLedOn |= PHY_M_LEDC_LOS_CTRL(YukLedState ? 9 : 8);
/* save page register */
SkGmPhyRead(pAC, IoC, port, PHY_MARV_EXT_ADR, &PageSelect);
/* select page 3 for LED control */
SkGmPhyWrite(pAC, IoC, port, PHY_MARV_EXT_ADR, 3);
SkGmPhyWrite(pAC, IoC, port, PHY_MARV_PHY_CTRL, YukLedOn);
/* restore page register */
SkGmPhyWrite(pAC, IoC, port, PHY_MARV_EXT_ADR, PageSelect);
} else {
SkGmPhyWrite(pAC,IoC,port,PHY_MARV_LED_OVER,YukLedOn);
}
} else {
if ( (pAC->GIni.GIChipId == CHIP_ID_YUKON_XL) ||
(pAC->GIni.GIChipId == CHIP_ID_YUKON_2(pAC)) ||
(pAC->GIni.GIChipId == CHIP_ID_YUKON_EC_U) ) {
YukLedOn = 0;
YukLedState = 1;
YukLedOn |= PHY_M_LEDC_INIT_CTRL(YukLedState ? 9 : 8);
YukLedState = 1;
YukLedOn |= PHY_M_LEDC_STA1_CTRL(YukLedState ? 9 : 8);
YukLedState = 1;
YukLedOn |= PHY_M_LEDC_STA0_CTRL(YukLedState ? 9 : 8);
YukLedState = 1;
YukLedOn |= PHY_M_LEDC_LOS_CTRL(YukLedState ? 9 : 8);
/* save page register */
SkGmPhyRead(pAC, IoC, port, PHY_MARV_EXT_ADR, &PageSelect);
/* select page 3 for LED control */
SkGmPhyWrite(pAC, IoC, port, PHY_MARV_EXT_ADR, 3);
SkGmPhyWrite(pAC, IoC, port, PHY_MARV_PHY_CTRL, YukLedOff);
/* restore page register */
SkGmPhyWrite(pAC, IoC, port, PHY_MARV_EXT_ADR, PageSelect);
} else {
SkGmPhyWrite(pAC,IoC,port,PHY_MARV_LED_OVER,YukLedOff);
}
}
locateNICtimer.function = toggleLeds;
locateNICtimer.data = (unsigned long) pNet;
locateNICtimer.expires = jiffies + (HZ/4);
add_timer(&locateNICtimer);
}
/*****************************************************************************
*
* toggleLeds - Changes the LED state of an adapter
*
* Description:
* This function changes the current state of all LEDs of an adapter so
* that it can be located by a user. If the requested time interval for
* this test has elapsed, this function cleans up everything that was
* temporarily setup during the locate NIC test. This involves of course
* also closing or opening any adapter so that the initial board state
* is recovered.
*
* Returns: N/A
*
*/
static void toggleLeds(
unsigned long ptr) /* holds the pointer to adapter control context */
{
DEV_NET *pNet = (DEV_NET*) ptr;
SK_AC *pAC = pNet->pAC;
int port = pNet->PortNr;
SK_IOC IoC = pAC->IoBase;
struct SK_NET_DEVICE *pDev = pAC->dev[port];
int OtherPort = (port) ? 0 : 1;
struct SK_NET_DEVICE *pOtherDev = pAC->dev[OtherPort];
SK_U16 PageSelect;
SK_BOOL YukLedState;
SK_U16 YukLedOn = (PHY_M_LED_MO_DUP(MO_LED_ON) |
PHY_M_LED_MO_10(MO_LED_ON) |
PHY_M_LED_MO_100(MO_LED_ON) |
PHY_M_LED_MO_1000(MO_LED_ON) |
PHY_M_LED_MO_RX(MO_LED_ON));
SK_U16 YukLedOff = (PHY_M_LED_MO_DUP(MO_LED_OFF) |
PHY_M_LED_MO_10(MO_LED_OFF) |
PHY_M_LED_MO_100(MO_LED_OFF) |
PHY_M_LED_MO_1000(MO_LED_OFF) |
PHY_M_LED_MO_RX(MO_LED_OFF) |
PHY_M_LED_MO_TX(MO_LED_OFF));
nbrBlinkQuarterSeconds--;
if (nbrBlinkQuarterSeconds <= 0) {
/*
* We have to stop the device again in case the device has no
* been up.
*/
if (!boardWasDown[0]) {
/*
* The board is already up as we bring it up in case it is not.
*/
} else {
(*pDev->netdev_ops->ndo_stop)(pDev);
}
if (isDualNetCard) {
if (!boardWasDown[1]) {
/*
* The board is already up as we bring it up in case it is not.
*/
} else {
(*pOtherDev->netdev_ops->ndo_stop)(pOtherDev);
}
}
isDualNetCard = SK_FALSE;
isLocateNICrunning = SK_FALSE;
return;
}
doSwitchLEDsOn = (doSwitchLEDsOn) ? SK_FALSE : SK_TRUE;
if ( (doSwitchLEDsOn) && (nbrBlinkQuarterSeconds > 2) ){
if (pAC->GIni.GIGenesis) {
SK_OUT8(IoC,MR_ADDR(port,LNK_LED_REG),(SK_U8)SK_LNK_ON);
SkGeYellowLED(pAC,IoC,LED_ON >> 1);
SkGeXmitLED(pAC,IoC,MR_ADDR(port,RX_LED_INI),SK_LED_TST);
if (pAC->GIni.GP[port].PhyType == SK_PHY_BCOM) {
SkXmPhyWrite(pAC,IoC,port,PHY_BCOM_P_EXT_CTRL,PHY_B_PEC_LED_ON);
} else if (pAC->GIni.GP[port].PhyType == SK_PHY_LONE) {
SkXmPhyWrite(pAC,IoC,port,PHY_LONE_LED_CFG,0x0800);
} else {
SkGeXmitLED(pAC,IoC,MR_ADDR(port,TX_LED_INI),SK_LED_TST);
}
} else {
if ( (pAC->GIni.GIChipId == CHIP_ID_YUKON_XL) ||