void PIOS_Board_Init(void) {
/* Delay system */
PIOS_DELAY_Init();
const struct pios_board_info * bdinfo = &pios_board_info_blob;
#if defined(PIOS_INCLUDE_LED)
const struct pios_led_cfg * led_cfg = PIOS_BOARD_HW_DEFS_GetLedCfg(bdinfo->board_rev);
PIOS_Assert(led_cfg);
PIOS_LED_Init(led_cfg);
#endif /* PIOS_INCLUDE_LED */
/* Set up the SPI interface to the gyro/acelerometer */
if (PIOS_SPI_Init(&pios_spi_gyro_id, &pios_spi_gyro_cfg)) {
PIOS_DEBUG_Assert(0);
}
/* Set up the SPI interface to the flash and rfm22b */
if (PIOS_SPI_Init(&pios_spi_telem_flash_id, &pios_spi_telem_flash_cfg)) {
PIOS_DEBUG_Assert(0);
}
#if defined(PIOS_INCLUDE_FLASH)
/* Connect flash to the approrpiate interface and configure it */
uintptr_t flash_id;
if (PIOS_Flash_Jedec_Init(&flash_id, pios_spi_telem_flash_id, 1, &flash_m25p_cfg) != 0)
panic(1);
uintptr_t fs_id;
if (PIOS_FLASHFS_Logfs_Init(&fs_id, &flashfs_m25p_cfg, &pios_jedec_flash_driver, flash_id) != 0)
panic(1);
#endif
/* Initialize UAVObject libraries */
EventDispatcherInitialize();
UAVObjInitialize();
HwFreedomInitialize();
ModuleSettingsInitialize();
#if defined(PIOS_INCLUDE_RTC)
PIOS_RTC_Init(&pios_rtc_main_cfg);
#endif
/* Initialize the alarms library */
AlarmsInitialize();
/* Initialize the task monitor library */
TaskMonitorInitialize();
// /* Set up pulse timers */
PIOS_TIM_InitClock(&tim_1_cfg);
PIOS_TIM_InitClock(&tim_2_cfg);
PIOS_TIM_InitClock(&tim_3_cfg);
/* IAP System Setup */
PIOS_IAP_Init();
uint16_t boot_count = PIOS_IAP_ReadBootCount();
if (boot_count < 3) {
PIOS_IAP_WriteBootCount(++boot_count);
AlarmsClear(SYSTEMALARMS_ALARM_BOOTFAULT);
} else {
/* Too many failed boot attempts, force hw config to defaults */
HwFreedomSetDefaults(HwFreedomHandle(), 0);
ModuleSettingsSetDefaults(ModuleSettingsHandle(),0);
AlarmsSet(SYSTEMALARMS_ALARM_BOOTFAULT, SYSTEMALARMS_ALARM_CRITICAL);
}
PIOS_IAP_Init();
#if defined(PIOS_INCLUDE_USB)
/* Initialize board specific USB data */
PIOS_USB_BOARD_DATA_Init();
/* Flags to determine if various USB interfaces are advertised */
bool usb_hid_present = false;
bool usb_cdc_present = false;
#if defined(PIOS_INCLUDE_USB_CDC)
if (PIOS_USB_DESC_HID_CDC_Init()) {
PIOS_Assert(0);
}
usb_hid_present = true;
usb_cdc_present = true;
#else
if (PIOS_USB_DESC_HID_ONLY_Init()) {
PIOS_Assert(0);
}
usb_hid_present = true;
#endif
uint32_t pios_usb_id;
PIOS_USB_Init(&pios_usb_id, PIOS_BOARD_HW_DEFS_GetUsbCfg(bdinfo->board_rev));
#if defined(PIOS_INCLUDE_USB_CDC)
uint8_t hw_usb_vcpport;
/* Configure the USB VCP port */
HwFreedomUSB_VCPPortGet(&hw_usb_vcpport);
if (!usb_cdc_present) {
/* Force VCP port function to disabled if we haven't advertised VCP in our USB descriptor */
hw_usb_vcpport = HWFREEDOM_USB_VCPPORT_DISABLED;
}
switch (hw_usb_vcpport) {
case HWFREEDOM_USB_VCPPORT_DISABLED:
break;
case HWFREEDOM_USB_VCPPORT_USBTELEMETRY:
#if defined(PIOS_INCLUDE_COM)
PIOS_Board_configure_com(&pios_usb_cdc_cfg, PIOS_COM_TELEM_USB_RX_BUF_LEN, PIOS_COM_TELEM_USB_TX_BUF_LEN, &pios_usb_cdc_com_driver, &pios_com_telem_usb_id);
#endif /* PIOS_INCLUDE_COM */
break;
case HWFREEDOM_USB_VCPPORT_COMBRIDGE:
#if defined(PIOS_INCLUDE_COM)
PIOS_Board_configure_com(&pios_usb_cdc_cfg, PIOS_COM_BRIDGE_RX_BUF_LEN, PIOS_COM_BRIDGE_TX_BUF_LEN, &pios_usb_cdc_com_driver, &pios_com_vcp_id);
#endif /* PIOS_INCLUDE_COM */
break;
case HWFREEDOM_USB_VCPPORT_DEBUGCONSOLE:
#if defined(PIOS_INCLUDE_COM)
#if defined(PIOS_INCLUDE_DEBUG_CONSOLE)
{
uint32_t pios_usb_cdc_id;
if (PIOS_USB_CDC_Init(&pios_usb_cdc_id, &pios_usb_cdc_cfg, pios_usb_id)) {
PIOS_Assert(0);
}
uint8_t * tx_buffer = (uint8_t *) pvPortMalloc(PIOS_COM_DEBUGCONSOLE_TX_BUF_LEN);
PIOS_Assert(tx_buffer);
if (PIOS_COM_Init(&pios_com_debug_id, &pios_usb_cdc_com_driver, pios_usb_cdc_id,
NULL, 0,
tx_buffer, PIOS_COM_DEBUGCONSOLE_TX_BUF_LEN)) {
PIOS_Assert(0);
}
}
#endif /* PIOS_INCLUDE_DEBUG_CONSOLE */
#endif /* PIOS_INCLUDE_COM */
break;
}
#endif /* PIOS_INCLUDE_USB_CDC */
#if defined(PIOS_INCLUDE_USB_HID)
/* Configure the usb HID port */
uint8_t hw_usb_hidport;
HwFreedomUSB_HIDPortGet(&hw_usb_hidport);
if (!usb_hid_present) {
/* Force HID port function to disabled if we haven't advertised HID in our USB descriptor */
hw_usb_hidport = HWFREEDOM_USB_HIDPORT_DISABLED;
}
switch (hw_usb_hidport) {
case HWFREEDOM_USB_HIDPORT_DISABLED:
break;
case HWFREEDOM_USB_HIDPORT_USBTELEMETRY:
#if defined(PIOS_INCLUDE_COM)
{
uint32_t pios_usb_hid_id;
if (PIOS_USB_HID_Init(&pios_usb_hid_id, &pios_usb_hid_cfg, pios_usb_id)) {
PIOS_Assert(0);
}
uint8_t * rx_buffer = (uint8_t *) pvPortMalloc(PIOS_COM_TELEM_USB_RX_BUF_LEN);
uint8_t * tx_buffer = (uint8_t *) pvPortMalloc(PIOS_COM_TELEM_USB_TX_BUF_LEN);
PIOS_Assert(rx_buffer);
PIOS_Assert(tx_buffer);
if (PIOS_COM_Init(&pios_com_telem_usb_id, &pios_usb_hid_com_driver, pios_usb_hid_id,
rx_buffer, PIOS_COM_TELEM_USB_RX_BUF_LEN,
tx_buffer, PIOS_COM_TELEM_USB_TX_BUF_LEN)) {
PIOS_Assert(0);
}
}
#endif /* PIOS_INCLUDE_COM */
break;
}
#endif /* PIOS_INCLUDE_USB_HID */
if (usb_hid_present || usb_cdc_present) {
PIOS_USBHOOK_Activate();
}
#endif /* PIOS_INCLUDE_USB */
/* Configure IO ports */
uint8_t hw_DSMxBind;
HwFreedomDSMxBindGet(&hw_DSMxBind);
/* Configure FlexiPort */
uint8_t hw_mainport;
HwFreedomMainPortGet(&hw_mainport);
switch (hw_mainport) {
case HWFREEDOM_MAINPORT_DISABLED:
break;
case HWFREEDOM_MAINPORT_TELEMETRY:
PIOS_Board_configure_com(&pios_usart_main_cfg, PIOS_COM_TELEM_RF_RX_BUF_LEN, PIOS_COM_TELEM_RF_TX_BUF_LEN, &pios_usart_com_driver, &pios_com_telem_rf_id);
break;
break;
case HWFREEDOM_MAINPORT_GPS:
PIOS_Board_configure_com(&pios_usart_main_cfg, PIOS_COM_GPS_RX_BUF_LEN, -1, &pios_usart_com_driver, &pios_com_gps_id);
break;
case HWFREEDOM_MAINPORT_DSM2:
case HWFREEDOM_MAINPORT_DSMX10BIT:
case HWFREEDOM_MAINPORT_DSMX11BIT:
{
enum pios_dsm_proto proto;
switch (hw_mainport) {
case HWFREEDOM_MAINPORT_DSM2:
proto = PIOS_DSM_PROTO_DSM2;
break;
case HWFREEDOM_MAINPORT_DSMX10BIT:
proto = PIOS_DSM_PROTO_DSMX10BIT;
break;
case HWFREEDOM_MAINPORT_DSMX11BIT:
proto = PIOS_DSM_PROTO_DSMX11BIT;
break;
default:
PIOS_Assert(0);
break;
}
PIOS_Board_configure_dsm(&pios_usart_dsm_main_cfg, &pios_dsm_main_cfg,
&pios_usart_com_driver, &proto, MANUALCONTROLSETTINGS_CHANNELGROUPS_DSMMAINPORT,&hw_DSMxBind);
}
break;
case HWFREEDOM_MAINPORT_DEBUGCONSOLE:
#if defined(PIOS_INCLUDE_DEBUG_CONSOLE)
{
PIOS_Board_configure_com(&pios_usart_main_cfg, 0, PIOS_COM_DEBUGCONSOLE_TX_BUF_LEN, &pios_usart_com_driver, &pios_com_aux_id);
}
#endif /* PIOS_INCLUDE_DEBUG_CONSOLE */
break;
case HWFREEDOM_MAINPORT_COMBRIDGE:
PIOS_Board_configure_com(&pios_usart_main_cfg, PIOS_COM_BRIDGE_RX_BUF_LEN, PIOS_COM_BRIDGE_TX_BUF_LEN, &pios_usart_com_driver, &pios_com_bridge_id);
break;
} /* hw_freedom_mainport */
/* Configure flexi USART port */
uint8_t hw_flexiport;
HwFreedomFlexiPortGet(&hw_flexiport);
switch (hw_flexiport) {
case HWFREEDOM_FLEXIPORT_DISABLED:
break;
case HWFREEDOM_FLEXIPORT_TELEMETRY:
PIOS_Board_configure_com(&pios_usart_flexi_cfg, PIOS_COM_TELEM_RF_RX_BUF_LEN, PIOS_COM_TELEM_RF_TX_BUF_LEN, &pios_usart_com_driver, &pios_com_telem_rf_id);
break;
case HWFREEDOM_FLEXIPORT_GPS:
PIOS_Board_configure_com(&pios_usart_flexi_cfg, PIOS_COM_GPS_RX_BUF_LEN, -1, &pios_usart_com_driver, &pios_com_gps_id);
break;
case HWFREEDOM_FLEXIPORT_DSM2:
case HWFREEDOM_FLEXIPORT_DSMX10BIT:
case HWFREEDOM_FLEXIPORT_DSMX11BIT:
{
enum pios_dsm_proto proto;
switch (hw_flexiport) {
case HWFREEDOM_FLEXIPORT_DSM2:
proto = PIOS_DSM_PROTO_DSM2;
break;
case HWFREEDOM_FLEXIPORT_DSMX10BIT:
proto = PIOS_DSM_PROTO_DSMX10BIT;
break;
case HWFREEDOM_FLEXIPORT_DSMX11BIT:
proto = PIOS_DSM_PROTO_DSMX11BIT;
break;
default:
PIOS_Assert(0);
break;
}
//TODO: Define the various Channelgroup for Revo dsm inputs and handle here
PIOS_Board_configure_dsm(&pios_usart_dsm_flexi_cfg, &pios_dsm_flexi_cfg,
&pios_usart_com_driver, &proto, MANUALCONTROLSETTINGS_CHANNELGROUPS_DSMFLEXIPORT,&hw_DSMxBind);
}
break;
case HWFREEDOM_FLEXIPORT_I2C:
#if defined(PIOS_INCLUDE_I2C)
{
if (PIOS_I2C_Init(&pios_i2c_flexiport_adapter_id, &pios_i2c_flexiport_adapter_cfg)) {
PIOS_Assert(0);
}
}
#endif /* PIOS_INCLUDE_I2C */
case HWFREEDOM_FLEXIPORT_DEBUGCONSOLE:
#if defined(PIOS_INCLUDE_DEBUG_CONSOLE)
{
PIOS_Board_configure_com(&pios_usart_flexi_cfg, 0, PIOS_COM_DEBUGCONSOLE_TX_BUF_LEN, &pios_usart_com_driver, &pios_com_aux_id);
}
#endif /* PIOS_INCLUDE_DEBUG_CONSOLE */
break;
case HWFREEDOM_FLEXIPORT_COMBRIDGE:
PIOS_Board_configure_com(&pios_usart_flexi_cfg, PIOS_COM_BRIDGE_RX_BUF_LEN, PIOS_COM_BRIDGE_TX_BUF_LEN, &pios_usart_com_driver, &pios_com_bridge_id);
break;
} /* hw_freedom_flexiport */
/* Initalize the RFM22B radio COM device. */
#if defined(PIOS_INCLUDE_RFM22B)
uint8_t hwsettings_radioport;
HwFreedomRadioPortGet(&hwsettings_radioport);
switch (hwsettings_radioport) {
case HWFREEDOM_RADIOPORT_DISABLED:
break;
case HWFREEDOM_RADIOPORT_TELEMETRY:
{
const struct pios_board_info * bdinfo = &pios_board_info_blob;
const struct pios_rfm22b_cfg *pios_rfm22b_cfg = PIOS_BOARD_HW_DEFS_GetRfm22Cfg(bdinfo->board_rev);
if (PIOS_RFM22B_Init(&pios_rfm22b_id, PIOS_RFM22_SPI_PORT, pios_rfm22b_cfg->slave_num, pios_rfm22b_cfg)) {
PIOS_Assert(0);
}
uint8_t *rx_buffer = (uint8_t *) pvPortMalloc(PIOS_COM_RFM22B_RF_RX_BUF_LEN);
uint8_t *tx_buffer = (uint8_t *) pvPortMalloc(PIOS_COM_RFM22B_RF_TX_BUF_LEN);
PIOS_Assert(rx_buffer);
PIOS_Assert(tx_buffer);
if (PIOS_COM_Init(&pios_com_telem_rf_id, &pios_rfm22b_com_driver, pios_rfm22b_id,
rx_buffer, PIOS_COM_RFM22B_RF_RX_BUF_LEN,
tx_buffer, PIOS_COM_RFM22B_RF_TX_BUF_LEN)) {
PIOS_Assert(0);
}
break;
}
}
#endif /* PIOS_INCLUDE_RFM22B */
/* Configure input receiver USART port */
uint8_t hw_rcvrport;
HwFreedomRcvrPortGet(&hw_rcvrport);
switch (hw_rcvrport) {
case HWFREEDOM_RCVRPORT_DISABLED:
break;
case HWFREEDOM_RCVRPORT_PPM:
{
uint32_t pios_ppm_id;
PIOS_PPM_Init(&pios_ppm_id, &pios_ppm_cfg);
uint32_t pios_ppm_rcvr_id;
if (PIOS_RCVR_Init(&pios_ppm_rcvr_id, &pios_ppm_rcvr_driver, pios_ppm_id)) {
PIOS_Assert(0);
}
pios_rcvr_group_map[MANUALCONTROLSETTINGS_CHANNELGROUPS_PPM] = pios_ppm_rcvr_id;
}
break;
case HWFREEDOM_RCVRPORT_DSM2:
case HWFREEDOM_RCVRPORT_DSMX10BIT:
case HWFREEDOM_RCVRPORT_DSMX11BIT:
{
enum pios_dsm_proto proto;
switch (hw_rcvrport) {
case HWFREEDOM_RCVRPORT_DSM2:
proto = PIOS_DSM_PROTO_DSM2;
break;
case HWFREEDOM_RCVRPORT_DSMX10BIT:
proto = PIOS_DSM_PROTO_DSMX10BIT;
break;
case HWFREEDOM_RCVRPORT_DSMX11BIT:
proto = PIOS_DSM_PROTO_DSMX11BIT;
break;
default:
PIOS_Assert(0);
break;
}
//TODO: Define the various Channelgroup for Revo dsm inputs and handle here
PIOS_Board_configure_dsm(&pios_usart_dsm_rcvr_cfg, &pios_dsm_rcvr_cfg,
&pios_usart_com_driver, &proto, MANUALCONTROLSETTINGS_CHANNELGROUPS_DSMFLEXIPORT,&hw_DSMxBind);
}
break;
case HWFREEDOM_RCVRPORT_SBUS:
#if defined(PIOS_INCLUDE_SBUS)
{
uint32_t pios_usart_sbus_id;
if (PIOS_USART_Init(&pios_usart_sbus_id, &pios_usart_sbus_rcvr_cfg)) {
PIOS_Assert(0);
}
uint32_t pios_sbus_id;
if (PIOS_SBus_Init(&pios_sbus_id, &pios_sbus_cfg, &pios_usart_com_driver, pios_usart_sbus_id)) {
PIOS_Assert(0);
}
uint32_t pios_sbus_rcvr_id;
if (PIOS_RCVR_Init(&pios_sbus_rcvr_id, &pios_sbus_rcvr_driver, pios_sbus_id)) {
PIOS_Assert(0);
}
pios_rcvr_group_map[MANUALCONTROLSETTINGS_CHANNELGROUPS_SBUS] = pios_sbus_rcvr_id;
}
#endif
break;
}
if (hw_rcvrport != HWFREEDOM_RCVRPORT_SBUS) {
GPIO_Init(pios_sbus_cfg.inv.gpio, (GPIO_InitTypeDef*)&pios_sbus_cfg.inv.init);
GPIO_WriteBit(pios_sbus_cfg.inv.gpio, pios_sbus_cfg.inv.init.GPIO_Pin, pios_sbus_cfg.gpio_inv_disable);
}
#if defined(PIOS_OVERO_SPI)
/* Set up the SPI based PIOS_COM interface to the overo */
{
bool overo_enabled = false;
#ifdef MODULE_OveroSync_BUILTIN
overo_enabled = true;
#else
uint8_t module_state[MODULESETTINGS_ADMINSTATE_NUMELEM];
ModuleSettingsAdminStateGet(module_state);
if (module_state[MODULESETTINGS_ADMINSTATE_OVEROSYNC] == MODULESETTINGS_ADMINSTATE_ENABLED) {
overo_enabled = true;
} else {
overo_enabled = false;
}
#endif
if (overo_enabled) {
if (PIOS_OVERO_Init(&pios_overo_id, &pios_overo_cfg)) {
PIOS_DEBUG_Assert(0);
}
const uint32_t PACKET_SIZE = 1024;
uint8_t * rx_buffer = (uint8_t *) pvPortMalloc(PACKET_SIZE);
uint8_t * tx_buffer = (uint8_t *) pvPortMalloc(PACKET_SIZE);
PIOS_Assert(rx_buffer);
PIOS_Assert(tx_buffer);
if (PIOS_COM_Init(&pios_com_overo_id, &pios_overo_com_driver, pios_overo_id,
rx_buffer, PACKET_SIZE,
tx_buffer, PACKET_SIZE)) {
PIOS_Assert(0);
}
}
}
#endif
#if defined(PIOS_INCLUDE_GCSRCVR)
GCSReceiverInitialize();
uint32_t pios_gcsrcvr_id;
PIOS_GCSRCVR_Init(&pios_gcsrcvr_id);
uint32_t pios_gcsrcvr_rcvr_id;
if (PIOS_RCVR_Init(&pios_gcsrcvr_rcvr_id, &pios_gcsrcvr_rcvr_driver, pios_gcsrcvr_id)) {
PIOS_Assert(0);
}
pios_rcvr_group_map[MANUALCONTROLSETTINGS_CHANNELGROUPS_GCS] = pios_gcsrcvr_rcvr_id;
#endif /* PIOS_INCLUDE_GCSRCVR */
#ifndef PIOS_DEBUG_ENABLE_DEBUG_PINS
uint8_t hw_output_port;
HwFreedomOutputGet(&hw_output_port);
switch (hw_output_port) {
case HWFREEDOM_OUTPUT_DISABLED:
break;
case HWFREEDOM_OUTPUT_PWM:
/* Set up the servo outputs */
PIOS_Servo_Init(&pios_servo_cfg);
break;
default:
break;
}
#else
PIOS_DEBUG_Init(&pios_tim_servo_all_channels, NELEMENTS(pios_tim_servo_all_channels));
#endif
PIOS_DELAY_WaitmS(200);
PIOS_SENSORS_Init();
#if defined(PIOS_INCLUDE_MPU6000)
if (PIOS_MPU6000_Init(pios_spi_gyro_id,0, &pios_mpu6000_cfg) != 0)
panic(2);
if (PIOS_MPU6000_Test() != 0)
panic(2);
// To be safe map from UAVO enum to driver enum
uint8_t hw_gyro_range;
HwFreedomGyroRangeGet(&hw_gyro_range);
switch(hw_gyro_range) {
case HWFREEDOM_GYRORANGE_250:
PIOS_MPU6000_SetGyroRange(PIOS_MPU60X0_SCALE_250_DEG);
break;
case HWFREEDOM_GYRORANGE_500:
PIOS_MPU6000_SetGyroRange(PIOS_MPU60X0_SCALE_500_DEG);
break;
case HWFREEDOM_GYRORANGE_1000:
PIOS_MPU6000_SetGyroRange(PIOS_MPU60X0_SCALE_1000_DEG);
break;
case HWFREEDOM_GYRORANGE_2000:
PIOS_MPU6000_SetGyroRange(PIOS_MPU60X0_SCALE_2000_DEG);
break;
}
uint8_t hw_accel_range;
HwFreedomAccelRangeGet(&hw_accel_range);
switch(hw_accel_range) {
case HWFREEDOM_ACCELRANGE_2G:
PIOS_MPU6000_SetAccelRange(PIOS_MPU60X0_ACCEL_2G);
break;
case HWFREEDOM_ACCELRANGE_4G:
PIOS_MPU6000_SetAccelRange(PIOS_MPU60X0_ACCEL_4G);
break;
case HWFREEDOM_ACCELRANGE_8G:
PIOS_MPU6000_SetAccelRange(PIOS_MPU60X0_ACCEL_8G);
break;
case HWFREEDOM_ACCELRANGE_16G:
PIOS_MPU6000_SetAccelRange(PIOS_MPU60X0_ACCEL_16G);
break;
}
uint8_t hw_mpu6000_rate;
HwFreedomMPU6000RateGet(&hw_mpu6000_rate);
uint16_t hw_mpu6000_divisor = \
(hw_mpu6000_rate == HWFREEDOM_MPU6000RATE_500) ? 15 : \
(hw_mpu6000_rate == HWFREEDOM_MPU6000RATE_666) ? 11 : \
(hw_mpu6000_rate == HWFREEDOM_MPU6000RATE_1000) ? 7 : \
(hw_mpu6000_rate == HWFREEDOM_MPU6000RATE_2000) ? 3 : \
(hw_mpu6000_rate == HWFREEDOM_MPU6000RATE_4000) ? 1 : \
(hw_mpu6000_rate == HWFREEDOM_MPU6000RATE_8000) ? 0 : \
15;
PIOS_MPU6000_SetDivisor(hw_mpu6000_divisor);
uint8_t hw_dlpf;
HwFreedomMPU6000DLPFGet(&hw_dlpf);
uint16_t hw_mpu6000_dlpf = \
(hw_dlpf == HWFREEDOM_MPU6000DLPF_256) ? PIOS_MPU60X0_LOWPASS_256_HZ : \
(hw_dlpf == HWFREEDOM_MPU6000DLPF_188) ? PIOS_MPU60X0_LOWPASS_188_HZ : \
(hw_dlpf == HWFREEDOM_MPU6000DLPF_98) ? PIOS_MPU60X0_LOWPASS_98_HZ : \
(hw_dlpf == HWFREEDOM_MPU6000DLPF_42) ? PIOS_MPU60X0_LOWPASS_42_HZ : \
(hw_dlpf == HWFREEDOM_MPU6000DLPF_20) ? PIOS_MPU60X0_LOWPASS_20_HZ : \
(hw_dlpf == HWFREEDOM_MPU6000DLPF_10) ? PIOS_MPU60X0_LOWPASS_10_HZ : \
(hw_dlpf == HWFREEDOM_MPU6000DLPF_5) ? PIOS_MPU60X0_LOWPASS_5_HZ : \
PIOS_MPU60X0_LOWPASS_256_HZ;
PIOS_MPU6000_SetLPF(hw_mpu6000_dlpf);
#endif
if (PIOS_I2C_Init(&pios_i2c_mag_pressure_adapter_id, &pios_i2c_mag_pressure_adapter_cfg)) {
PIOS_DEBUG_Assert(0);
}
if (PIOS_I2C_CheckClear(pios_i2c_mag_pressure_adapter_id) != 0)
panic(5);
PIOS_DELAY_WaitmS(50);
#if defined(PIOS_INCLUDE_ADC)
PIOS_ADC_Init(&pios_adc_cfg);
#endif
PIOS_LED_On(0);
#if defined(PIOS_INCLUDE_HMC5883)
if (PIOS_HMC5883_Init(pios_i2c_mag_pressure_adapter_id, &pios_hmc5883_cfg) != 0)
panic(3);
#endif
PIOS_LED_On(1);
#if defined(PIOS_INCLUDE_MS5611)
if (PIOS_MS5611_Init(&pios_ms5611_cfg, pios_i2c_mag_pressure_adapter_id) != 0)
panic(4);
#endif
PIOS_LED_On(2);
}
void PIOS_Board_Init(void) {
check_bor();
const struct pios_board_info * bdinfo = &pios_board_info_blob;
// Make sure all the PWM outputs are low
const struct pios_servo_cfg * servo_cfg = get_servo_cfg(bdinfo->board_rev);
const struct pios_tim_channel * channels = servo_cfg->channels;
uint8_t num_channels = servo_cfg->num_channels;
for (int i = 0; i < num_channels; i++) {
GPIO_Init(channels[i].pin.gpio, (GPIO_InitTypeDef*) &channels[i].pin.init);
}
/* Delay system */
PIOS_DELAY_Init();
#if defined(PIOS_INCLUDE_LED)
const struct pios_led_cfg * led_cfg = PIOS_BOARD_HW_DEFS_GetLedCfg(bdinfo->board_rev);
PIOS_Assert(led_cfg);
PIOS_LED_Init(led_cfg);
#endif /* PIOS_INCLUDE_LED */
/* Set up the SPI interface to the gyro/acelerometer */
if (PIOS_SPI_Init(&pios_spi_gyro_id, &pios_spi_gyro_cfg)) {
PIOS_DEBUG_Assert(0);
}
/* Set up the SPI interface to the flash and rfm22b */
if (PIOS_SPI_Init(&pios_spi_telem_flash_id, &pios_spi_telem_flash_cfg)) {
PIOS_DEBUG_Assert(0);
}
#if defined(PIOS_INCLUDE_FLASH)
/* Inititialize all flash drivers */
#if defined(PIOS_INCLUDE_FLASH_JEDEC)
if (get_external_flash(bdinfo->board_rev)) {
if (PIOS_Flash_Jedec_Init(&pios_external_flash_id, pios_spi_telem_flash_id, 1, &flash_m25p_cfg) != 0)
panic(1);
}
#endif /* PIOS_INCLUDE_FLASH_JEDEC */
PIOS_Flash_Internal_Init(&pios_internal_flash_id, &flash_internal_cfg);
/* Register the partition table */
const struct pios_flash_partition * flash_partition_table;
uint32_t num_partitions;
flash_partition_table = PIOS_BOARD_HW_DEFS_GetPartitionTable(bdinfo->board_rev, &num_partitions);
PIOS_FLASH_register_partition_table(flash_partition_table, num_partitions);
/* Mount all filesystems */
if (PIOS_FLASHFS_Logfs_Init(&pios_uavo_settings_fs_id, get_flashfs_settings_cfg(bdinfo->board_rev), FLASH_PARTITION_LABEL_SETTINGS))
panic(1);
#if defined(PIOS_INCLUDE_FLASH_JEDEC)
if (get_external_flash(bdinfo->board_rev)) {
if (PIOS_FLASHFS_Logfs_Init(&pios_waypoints_settings_fs_id, &flashfs_waypoints_cfg, FLASH_PARTITION_LABEL_WAYPOINTS) != 0)
panic(1);
}
#endif /* PIOS_INCLUDE_FLASH_JEDEC */
#if defined(ERASE_FLASH)
PIOS_FLASHFS_Format(pios_uavo_settings_fs_id);
#endif
#endif /* PIOS_INCLUDE_FLASH */
/* Initialize UAVObject libraries */
EventDispatcherInitialize();
UAVObjInitialize();
HwSparky2Initialize();
ModuleSettingsInitialize();
#if defined(PIOS_INCLUDE_RTC)
PIOS_RTC_Init(&pios_rtc_main_cfg);
#endif
#ifndef ERASE_FLASH
/* Initialize watchdog as early as possible to catch faults during init
* but do it only if there is no debugger connected
*/
if ((CoreDebug->DHCSR & CoreDebug_DHCSR_C_DEBUGEN_Msk) == 0) {
PIOS_WDG_Init();
}
#endif
/* Initialize the alarms library */
AlarmsInitialize();
/* Initialize the task monitor library */
TaskMonitorInitialize();
/* Set up pulse timers */
PIOS_TIM_InitClock(&tim_3_cfg);
PIOS_TIM_InitClock(&tim_5_cfg);
PIOS_TIM_InitClock(&tim_8_cfg);
PIOS_TIM_InitClock(&tim_9_cfg);
PIOS_TIM_InitClock(&tim_12_cfg);
NVIC_InitTypeDef tim_8_up_irq = {
.NVIC_IRQChannel = TIM8_UP_TIM13_IRQn,
.NVIC_IRQChannelPreemptionPriority = PIOS_IRQ_PRIO_MID,
.NVIC_IRQChannelSubPriority = 0,
.NVIC_IRQChannelCmd = ENABLE,
};
NVIC_Init(&tim_8_up_irq);
/* IAP System Setup */
PIOS_IAP_Init();
uint16_t boot_count = PIOS_IAP_ReadBootCount();
if (boot_count < 3) {
PIOS_IAP_WriteBootCount(++boot_count);
AlarmsClear(SYSTEMALARMS_ALARM_BOOTFAULT);
} else {
/* Too many failed boot attempts, force hw config to defaults */
HwSparky2SetDefaults(HwSparky2Handle(), 0);
ModuleSettingsSetDefaults(ModuleSettingsHandle(),0);
AlarmsSet(SYSTEMALARMS_ALARM_BOOTFAULT, SYSTEMALARMS_ALARM_CRITICAL);
}
//PIOS_IAP_Init();
#if defined(PIOS_INCLUDE_USB)
/* Initialize board specific USB data */
PIOS_USB_BOARD_DATA_Init();
/* Flags to determine if various USB interfaces are advertised */
bool usb_hid_present = false;
bool usb_cdc_present = false;
#if defined(PIOS_INCLUDE_USB_CDC)
if (PIOS_USB_DESC_HID_CDC_Init()) {
PIOS_Assert(0);
}
usb_hid_present = true;
usb_cdc_present = true;
#else
if (PIOS_USB_DESC_HID_ONLY_Init()) {
PIOS_Assert(0);
}
usb_hid_present = true;
#endif
uintptr_t pios_usb_id;
PIOS_USB_Init(&pios_usb_id, PIOS_BOARD_HW_DEFS_GetUsbCfg(bdinfo->board_rev));
#if defined(PIOS_INCLUDE_USB_CDC)
uint8_t hw_usb_vcpport;
/* Configure the USB VCP port */
HwSparky2USB_VCPPortGet(&hw_usb_vcpport);
if (!usb_cdc_present) {
/* Force VCP port function to disabled if we haven't advertised VCP in our USB descriptor */
hw_usb_vcpport = HWSPARKY2_USB_VCPPORT_DISABLED;
}
PIOS_HAL_ConfigureCDC(hw_usb_vcpport, pios_usb_id, &pios_usb_cdc_cfg);
#endif /* PIOS_INCLUDE_USB_CDC */
#if defined(PIOS_INCLUDE_USB_HID)
/* Configure the usb HID port */
uint8_t hw_usb_hidport;
HwSparky2USB_HIDPortGet(&hw_usb_hidport);
if (!usb_hid_present) {
/* Force HID port function to disabled if we haven't advertised HID in our USB descriptor */
hw_usb_hidport = HWSPARKY2_USB_HIDPORT_DISABLED;
}
PIOS_HAL_ConfigureHID(hw_usb_hidport, pios_usb_id, &pios_usb_hid_cfg);
#endif /* PIOS_INCLUDE_USB_HID */
if (usb_hid_present || usb_cdc_present) {
PIOS_USBHOOK_Activate();
}
#endif /* PIOS_INCLUDE_USB */
/* Configure IO ports */
HwSparky2DSMxModeOptions hw_DSMxMode;
HwSparky2DSMxModeGet(&hw_DSMxMode);
/* Configure main USART port */
uint8_t hw_mainport;
HwSparky2MainPortGet(&hw_mainport);
PIOS_HAL_ConfigurePort(hw_mainport, &pios_usart_main_cfg,
&pios_usart_com_driver, NULL, NULL, NULL,
PIOS_LED_ALARM,
&pios_usart_dsm_hsum_main_cfg, &pios_dsm_main_cfg,
hw_DSMxMode, NULL, NULL, false);
/* Configure FlexiPort */
uint8_t hw_flexiport;
HwSparky2FlexiPortGet(&hw_flexiport);
PIOS_HAL_ConfigurePort(hw_flexiport, &pios_usart_flexi_cfg,
&pios_usart_com_driver,
&pios_i2c_flexiport_adapter_id,
&pios_i2c_flexiport_adapter_cfg, NULL,
PIOS_LED_ALARM,
&pios_usart_dsm_hsum_flexi_cfg, &pios_dsm_flexi_cfg,
hw_DSMxMode, NULL, NULL, false);
#if defined(PIOS_INCLUDE_RFM22B)
HwSparky2Data hwSparky2;
HwSparky2Get(&hwSparky2);
const struct pios_rfm22b_cfg *rfm22b_cfg = PIOS_BOARD_HW_DEFS_GetRfm22Cfg(bdinfo->board_rev);
const struct pios_openlrs_cfg *openlrs_cfg = PIOS_BOARD_HW_DEFS_GetOpenLRSCfg(bdinfo->board_rev);
PIOS_HAL_ConfigureRFM22B(hwSparky2.Radio,
bdinfo->board_type, bdinfo->board_rev,
hwSparky2.MaxRfPower, hwSparky2.MaxRfSpeed,
openlrs_cfg, rfm22b_cfg,
hwSparky2.MinChannel, hwSparky2.MaxChannel,
hwSparky2.CoordID, 1);
#endif /* PIOS_INCLUDE_RFM22B */
/* Configure the receiver port*/
uint8_t hw_rcvrport;
HwSparky2RcvrPortGet(&hw_rcvrport);
if (bdinfo->board_rev != BRUSHEDSPARKY_V0_2 && hw_DSMxMode >= HWSPARKY2_DSMXMODE_BIND3PULSES) {
hw_DSMxMode = HWSPARKY2_DSMXMODE_AUTODETECT; /* Do not try to bind through XOR */
}
PIOS_HAL_ConfigurePort(hw_rcvrport,
NULL, /* XXX TODO: fix as part of DSM refactor */
&pios_usart_com_driver,
NULL, NULL,
&pios_ppm_cfg,
PIOS_LED_ALARM,
&pios_usart_dsm_hsum_rcvr_cfg,
&pios_dsm_rcvr_cfg,
hw_DSMxMode, get_sbus_rcvr_cfg(bdinfo->board_rev),
&pios_sbus_cfg, get_sbus_toggle(bdinfo->board_rev));
#if defined(PIOS_INCLUDE_GCSRCVR)
GCSReceiverInitialize();
uintptr_t pios_gcsrcvr_id;
PIOS_GCSRCVR_Init(&pios_gcsrcvr_id);
uintptr_t pios_gcsrcvr_rcvr_id;
if (PIOS_RCVR_Init(&pios_gcsrcvr_rcvr_id, &pios_gcsrcvr_rcvr_driver, pios_gcsrcvr_id)) {
PIOS_Assert(0);
}
pios_rcvr_group_map[MANUALCONTROLSETTINGS_CHANNELGROUPS_GCS] = pios_gcsrcvr_rcvr_id;
#endif /* PIOS_INCLUDE_GCSRCVR */
#ifndef PIOS_DEBUG_ENABLE_DEBUG_PINS
/* Set up the servo outputs */
PIOS_Servo_Init(&pios_servo_cfg);
#else
PIOS_DEBUG_Init(&pios_tim_servo_all_channels, NELEMENTS(pios_tim_servo_all_channels));
#endif
if (PIOS_I2C_Init(&pios_i2c_mag_pressure_adapter_id, &pios_i2c_mag_pressure_adapter_cfg)) {
PIOS_DEBUG_Assert(0);
}
#if defined(PIOS_INCLUDE_CAN)
if(get_use_can(bdinfo->board_rev)) {
if (PIOS_CAN_Init(&pios_can_id, &pios_can_cfg) != 0)
panic(6);
uint8_t * rx_buffer = (uint8_t *) PIOS_malloc(PIOS_COM_CAN_RX_BUF_LEN);
uint8_t * tx_buffer = (uint8_t *) PIOS_malloc(PIOS_COM_CAN_TX_BUF_LEN);
PIOS_Assert(rx_buffer);
PIOS_Assert(tx_buffer);
if (PIOS_COM_Init(&pios_com_can_id, &pios_can_com_driver, pios_can_id,
rx_buffer, PIOS_COM_CAN_RX_BUF_LEN,
tx_buffer, PIOS_COM_CAN_TX_BUF_LEN))
panic(6);
/* pios_com_bridge_id = pios_com_can_id; */
}
#endif
PIOS_DELAY_WaitmS(50);
PIOS_SENSORS_Init();
#if defined(PIOS_INCLUDE_ADC)
uint32_t internal_adc_id;
PIOS_INTERNAL_ADC_Init(&internal_adc_id, &pios_adc_cfg);
PIOS_ADC_Init(&pios_internal_adc_id, &pios_internal_adc_driver, internal_adc_id);
// configure the pullup for PA8 (inhibit pullups from current/sonar shared pin)
GPIO_Init(pios_current_sonar_pin.gpio, &pios_current_sonar_pin.init);
#endif
#if defined(PIOS_INCLUDE_MS5611)
if (PIOS_MS5611_Init(&pios_ms5611_cfg, pios_i2c_mag_pressure_adapter_id) != 0)
panic(4);
if (PIOS_MS5611_Test() != 0)
panic(4);
#endif
uint8_t Magnetometer;
HwSparky2MagnetometerGet(&Magnetometer);
if (Magnetometer != HWSPARKY2_MAGNETOMETER_INTERNAL)
pios_mpu9250_cfg.use_magnetometer = false;
#if defined(PIOS_INCLUDE_MPU9250_SPI)
if (PIOS_MPU9250_SPI_Init(pios_spi_gyro_id, 0, &pios_mpu9250_cfg) != 0)
panic(2);
// To be safe map from UAVO enum to driver enum
uint8_t hw_gyro_range;
HwSparky2GyroRangeGet(&hw_gyro_range);
switch(hw_gyro_range) {
case HWSPARKY2_GYRORANGE_250:
PIOS_MPU9250_SetGyroRange(PIOS_MPU60X0_SCALE_250_DEG);
break;
case HWSPARKY2_GYRORANGE_500:
PIOS_MPU9250_SetGyroRange(PIOS_MPU60X0_SCALE_500_DEG);
break;
case HWSPARKY2_GYRORANGE_1000:
PIOS_MPU9250_SetGyroRange(PIOS_MPU60X0_SCALE_1000_DEG);
break;
case HWSPARKY2_GYRORANGE_2000:
PIOS_MPU9250_SetGyroRange(PIOS_MPU60X0_SCALE_2000_DEG);
break;
}
uint8_t hw_accel_range;
HwSparky2AccelRangeGet(&hw_accel_range);
switch(hw_accel_range) {
case HWSPARKY2_ACCELRANGE_2G:
PIOS_MPU9250_SetAccelRange(PIOS_MPU60X0_ACCEL_2G);
break;
case HWSPARKY2_ACCELRANGE_4G:
PIOS_MPU9250_SetAccelRange(PIOS_MPU60X0_ACCEL_4G);
break;
case HWSPARKY2_ACCELRANGE_8G:
PIOS_MPU9250_SetAccelRange(PIOS_MPU60X0_ACCEL_8G);
break;
case HWSPARKY2_ACCELRANGE_16G:
PIOS_MPU9250_SetAccelRange(PIOS_MPU60X0_ACCEL_16G);
break;
}
// the filter has to be set before rate else divisor calculation will fail
uint8_t hw_mpu9250_dlpf;
HwSparky2MPU9250GyroLPFGet(&hw_mpu9250_dlpf);
enum pios_mpu9250_gyro_filter mpu9250_gyro_lpf = \
(hw_mpu9250_dlpf == HWSPARKY2_MPU9250GYROLPF_184) ? PIOS_MPU9250_GYRO_LOWPASS_184_HZ : \
(hw_mpu9250_dlpf == HWSPARKY2_MPU9250GYROLPF_92) ? PIOS_MPU9250_GYRO_LOWPASS_92_HZ : \
(hw_mpu9250_dlpf == HWSPARKY2_MPU9250GYROLPF_41) ? PIOS_MPU9250_GYRO_LOWPASS_41_HZ : \
(hw_mpu9250_dlpf == HWSPARKY2_MPU9250GYROLPF_20) ? PIOS_MPU9250_GYRO_LOWPASS_20_HZ : \
(hw_mpu9250_dlpf == HWSPARKY2_MPU9250GYROLPF_10) ? PIOS_MPU9250_GYRO_LOWPASS_10_HZ : \
(hw_mpu9250_dlpf == HWSPARKY2_MPU9250GYROLPF_5) ? PIOS_MPU9250_GYRO_LOWPASS_5_HZ : \
pios_mpu9250_cfg.default_gyro_filter;
PIOS_MPU9250_SetGyroLPF(mpu9250_gyro_lpf);
HwSparky2MPU9250AccelLPFGet(&hw_mpu9250_dlpf);
enum pios_mpu9250_accel_filter mpu9250_accel_lpf = \
(hw_mpu9250_dlpf == HWSPARKY2_MPU9250ACCELLPF_460) ? PIOS_MPU9250_ACCEL_LOWPASS_460_HZ : \
(hw_mpu9250_dlpf == HWSPARKY2_MPU9250ACCELLPF_184) ? PIOS_MPU9250_ACCEL_LOWPASS_184_HZ : \
(hw_mpu9250_dlpf == HWSPARKY2_MPU9250ACCELLPF_92) ? PIOS_MPU9250_ACCEL_LOWPASS_92_HZ : \
(hw_mpu9250_dlpf == HWSPARKY2_MPU9250ACCELLPF_41) ? PIOS_MPU9250_ACCEL_LOWPASS_41_HZ : \
(hw_mpu9250_dlpf == HWSPARKY2_MPU9250ACCELLPF_20) ? PIOS_MPU9250_ACCEL_LOWPASS_20_HZ : \
(hw_mpu9250_dlpf == HWSPARKY2_MPU9250ACCELLPF_10) ? PIOS_MPU9250_ACCEL_LOWPASS_10_HZ : \
(hw_mpu9250_dlpf == HWSPARKY2_MPU9250ACCELLPF_5) ? PIOS_MPU9250_ACCEL_LOWPASS_5_HZ : \
pios_mpu9250_cfg.default_accel_filter;
PIOS_MPU9250_SetAccelLPF(mpu9250_accel_lpf);
uint8_t hw_mpu9250_samplerate;
HwSparky2MPU9250RateGet(&hw_mpu9250_samplerate);
uint16_t mpu9250_samplerate = \
(hw_mpu9250_samplerate == HWSPARKY2_MPU9250RATE_200) ? 200 : \
(hw_mpu9250_samplerate == HWSPARKY2_MPU9250RATE_250) ? 250 : \
(hw_mpu9250_samplerate == HWSPARKY2_MPU9250RATE_333) ? 333 : \
(hw_mpu9250_samplerate == HWSPARKY2_MPU9250RATE_500) ? 500 : \
(hw_mpu9250_samplerate == HWSPARKY2_MPU9250RATE_1000) ? 1000 : \
pios_mpu9250_cfg.default_samplerate;
PIOS_MPU9250_SetSampleRate(mpu9250_samplerate);
#endif /* PIOS_INCLUDE_MPU9250_SPI */
PIOS_WDG_Clear();
#if defined(PIOS_INCLUDE_HMC5883)
{
uint8_t Magnetometer;
HwSparky2MagnetometerGet(&Magnetometer);
if (Magnetometer == HWSPARKY2_MAGNETOMETER_EXTERNALI2CFLEXIPORT)
{
if (PIOS_HMC5883_Init(pios_i2c_flexiport_adapter_id, &pios_hmc5883_external_cfg) != 0)
panic(6);
if (PIOS_HMC5883_Test() != 0)
panic(6);
} else if (Magnetometer == HWSPARKY2_MAGNETOMETER_EXTERNALAUXI2C) {
if (PIOS_HMC5883_Init(pios_i2c_mag_pressure_adapter_id, &pios_hmc5883_external_cfg) != 0)
panic(6);
if (PIOS_HMC5883_Test() != 0)
panic(6);
}
if (Magnetometer != HWSPARKY2_MAGNETOMETER_INTERNAL) {
// setup sensor orientation
uint8_t ExtMagOrientation;
HwSparky2ExtMagOrientationGet(&ExtMagOrientation);
enum pios_hmc5883_orientation hmc5883_orientation = \
(ExtMagOrientation == HWSPARKY2_EXTMAGORIENTATION_TOP0DEGCW) ? PIOS_HMC5883_TOP_0DEG : \
(ExtMagOrientation == HWSPARKY2_EXTMAGORIENTATION_TOP90DEGCW) ? PIOS_HMC5883_TOP_90DEG : \
(ExtMagOrientation == HWSPARKY2_EXTMAGORIENTATION_TOP180DEGCW) ? PIOS_HMC5883_TOP_180DEG : \
(ExtMagOrientation == HWSPARKY2_EXTMAGORIENTATION_TOP270DEGCW) ? PIOS_HMC5883_TOP_270DEG : \
(ExtMagOrientation == HWSPARKY2_EXTMAGORIENTATION_BOTTOM0DEGCW) ? PIOS_HMC5883_BOTTOM_0DEG : \
(ExtMagOrientation == HWSPARKY2_EXTMAGORIENTATION_BOTTOM90DEGCW) ? PIOS_HMC5883_BOTTOM_90DEG : \
(ExtMagOrientation == HWSPARKY2_EXTMAGORIENTATION_BOTTOM180DEGCW) ? PIOS_HMC5883_BOTTOM_180DEG : \
(ExtMagOrientation == HWSPARKY2_EXTMAGORIENTATION_BOTTOM270DEGCW) ? PIOS_HMC5883_BOTTOM_270DEG : \
pios_hmc5883_external_cfg.Default_Orientation;
PIOS_HMC5883_SetOrientation(hmc5883_orientation);
}
}
#endif /* PIOS_INCLUDE_HMC5883 */
#if defined(PIOS_INCLUDE_FLASH) && defined(PIOS_INCLUDE_FLASH_JEDEC)
if (get_external_flash(bdinfo->board_rev)) {
if ( PIOS_STREAMFS_Init(&streamfs_id, &streamfs_settings, FLASH_PARTITION_LABEL_LOG) != 0)
panic(8);
const uint32_t LOG_BUF_LEN = 256;
uint8_t *log_rx_buffer = PIOS_malloc(LOG_BUF_LEN);
uint8_t *log_tx_buffer = PIOS_malloc(LOG_BUF_LEN);
if (PIOS_COM_Init(&pios_com_logging_id, &pios_streamfs_com_driver, streamfs_id,
log_rx_buffer, LOG_BUF_LEN, log_tx_buffer, LOG_BUF_LEN) != 0)
panic(9);
}
#endif /* PIOS_INCLUDE_FLASH */
switch (bdinfo->board_rev) {
case BRUSHEDSPARKY_V0_2:
{
HwSparky2VTX_ChOptions channel;
HwSparky2VTX_ChGet(&channel);
set_vtx_channel(channel);
}
break;
}
}
void PIOS_Board_Init(void) {
/* Delay system */
PIOS_DELAY_Init();
const struct pios_board_info * bdinfo = &pios_board_info_blob;
#if defined(PIOS_INCLUDE_LED)
const struct pios_led_cfg * led_cfg = PIOS_BOARD_HW_DEFS_GetLedCfg(bdinfo->board_rev);
PIOS_Assert(led_cfg);
PIOS_LED_Init(led_cfg);
#endif /* PIOS_INCLUDE_LED */
/* Set up the SPI interface to the gyro/acelerometer */
if (PIOS_SPI_Init(&pios_spi_gyro_id, &pios_spi_gyro_cfg)) {
PIOS_DEBUG_Assert(0);
}
/* Set up the SPI interface to the flash and rfm22b */
if (PIOS_SPI_Init(&pios_spi_telem_flash_id, &pios_spi_telem_flash_cfg)) {
PIOS_DEBUG_Assert(0);
}
#if defined(PIOS_INCLUDE_FLASH)
/* Inititialize all flash drivers */
if (PIOS_Flash_Jedec_Init(&pios_external_flash_id, pios_spi_telem_flash_id, 1, &flash_m25p_cfg) != 0)
panic(1);
if (PIOS_Flash_Internal_Init(&pios_internal_flash_id, &flash_internal_cfg) != 0)
panic(1);
/* Register the partition table */
const struct pios_flash_partition * flash_partition_table;
uint32_t num_partitions;
flash_partition_table = PIOS_BOARD_HW_DEFS_GetPartitionTable(bdinfo->board_rev, &num_partitions);
PIOS_FLASH_register_partition_table(flash_partition_table, num_partitions);
/* Mount all filesystems */
if (PIOS_FLASHFS_Logfs_Init(&pios_uavo_settings_fs_id, &flashfs_settings_cfg, FLASH_PARTITION_LABEL_SETTINGS) != 0)
panic(1);
if (PIOS_FLASHFS_Logfs_Init(&pios_waypoints_settings_fs_id, &flashfs_waypoints_cfg, FLASH_PARTITION_LABEL_WAYPOINTS) != 0)
panic(1);
#if defined(ERASE_FLASH)
PIOS_FLASHFS_Format(pios_uavo_settings_fs_id);
#endif
#endif /* PIOS_INCLUDE_FLASH */
/* Initialize the task monitor library */
TaskMonitorInitialize();
/* Initialize UAVObject libraries */
EventDispatcherInitialize();
UAVObjInitialize();
/* Initialize the alarms library */
AlarmsInitialize();
HwFreedomInitialize();
ModuleSettingsInitialize();
#if defined(PIOS_INCLUDE_RTC)
PIOS_RTC_Init(&pios_rtc_main_cfg);
#endif
#ifndef ERASE_FLASH
/* Initialize watchdog as early as possible to catch faults during init
* but do it only if there is no debugger connected
*/
if ((CoreDebug->DHCSR & CoreDebug_DHCSR_C_DEBUGEN_Msk) == 0) {
PIOS_WDG_Init();
}
#endif
// /* Set up pulse timers */
PIOS_TIM_InitClock(&tim_1_cfg);
PIOS_TIM_InitClock(&tim_2_cfg);
PIOS_TIM_InitClock(&tim_3_cfg);
/* IAP System Setup */
PIOS_IAP_Init();
uint16_t boot_count = PIOS_IAP_ReadBootCount();
if (boot_count < 3) {
PIOS_IAP_WriteBootCount(++boot_count);
AlarmsClear(SYSTEMALARMS_ALARM_BOOTFAULT);
} else {
/* Too many failed boot attempts, force hw config to defaults */
HwFreedomSetDefaults(HwFreedomHandle(), 0);
ModuleSettingsSetDefaults(ModuleSettingsHandle(),0);
AlarmsSet(SYSTEMALARMS_ALARM_BOOTFAULT, SYSTEMALARMS_ALARM_CRITICAL);
}
PIOS_IAP_Init();
#if defined(PIOS_INCLUDE_USB)
/* Initialize board specific USB data */
PIOS_USB_BOARD_DATA_Init();
/* Flags to determine if various USB interfaces are advertised */
bool usb_hid_present = false;
bool usb_cdc_present = false;
#if defined(PIOS_INCLUDE_USB_CDC)
if (PIOS_USB_DESC_HID_CDC_Init()) {
PIOS_Assert(0);
}
usb_hid_present = true;
usb_cdc_present = true;
#else
if (PIOS_USB_DESC_HID_ONLY_Init()) {
PIOS_Assert(0);
}
usb_hid_present = true;
#endif
uintptr_t pios_usb_id;
PIOS_USB_Init(&pios_usb_id, PIOS_BOARD_HW_DEFS_GetUsbCfg(bdinfo->board_rev));
#if defined(PIOS_INCLUDE_USB_CDC)
uint8_t hw_usb_vcpport;
/* Configure the USB VCP port */
HwFreedomUSB_VCPPortGet(&hw_usb_vcpport);
if (!usb_cdc_present) {
/* Force VCP port function to disabled if we haven't advertised VCP in our USB descriptor */
hw_usb_vcpport = HWFREEDOM_USB_VCPPORT_DISABLED;
}
uintptr_t pios_usb_cdc_id;
if (PIOS_USB_CDC_Init(&pios_usb_cdc_id, &pios_usb_cdc_cfg, pios_usb_id)) {
PIOS_Assert(0);
}
switch (hw_usb_vcpport) {
case HWFREEDOM_USB_VCPPORT_DISABLED:
break;
case HWFREEDOM_USB_VCPPORT_USBTELEMETRY:
#if defined(PIOS_INCLUDE_COM)
{
uint8_t * rx_buffer = (uint8_t *) PIOS_malloc(PIOS_COM_TELEM_USB_RX_BUF_LEN);
uint8_t * tx_buffer = (uint8_t *) PIOS_malloc(PIOS_COM_TELEM_USB_TX_BUF_LEN);
PIOS_Assert(rx_buffer);
PIOS_Assert(tx_buffer);
if (PIOS_COM_Init(&pios_com_telem_usb_id, &pios_usb_cdc_com_driver, pios_usb_cdc_id,
rx_buffer, PIOS_COM_TELEM_USB_RX_BUF_LEN,
tx_buffer, PIOS_COM_TELEM_USB_TX_BUF_LEN)) {
PIOS_Assert(0);
}
}
#endif /* PIOS_INCLUDE_COM */
break;
case HWFREEDOM_USB_VCPPORT_COMBRIDGE:
#if defined(PIOS_INCLUDE_COM)
{
uint8_t * rx_buffer = (uint8_t *) PIOS_malloc(PIOS_COM_BRIDGE_RX_BUF_LEN);
uint8_t * tx_buffer = (uint8_t *) PIOS_malloc(PIOS_COM_BRIDGE_TX_BUF_LEN);
PIOS_Assert(rx_buffer);
PIOS_Assert(tx_buffer);
if (PIOS_COM_Init(&pios_com_vcp_id, &pios_usb_cdc_com_driver, pios_usb_cdc_id,
rx_buffer, PIOS_COM_BRIDGE_RX_BUF_LEN,
tx_buffer, PIOS_COM_BRIDGE_TX_BUF_LEN)) {
PIOS_Assert(0);
}
}
#endif /* PIOS_INCLUDE_COM */
break;
case HWFREEDOM_USB_VCPPORT_DEBUGCONSOLE:
#if defined(PIOS_INCLUDE_COM)
#if defined(PIOS_INCLUDE_DEBUG_CONSOLE)
{
uint8_t * tx_buffer = (uint8_t *) PIOS_malloc(PIOS_COM_DEBUGCONSOLE_TX_BUF_LEN);
PIOS_Assert(tx_buffer);
if (PIOS_COM_Init(&pios_com_debug_id, &pios_usb_cdc_com_driver, pios_usb_cdc_id,
NULL, 0,
tx_buffer, PIOS_COM_DEBUGCONSOLE_TX_BUF_LEN)) {
PIOS_Assert(0);
}
}
#endif /* PIOS_INCLUDE_DEBUG_CONSOLE */
#endif /* PIOS_INCLUDE_COM */
break;
case HWFREEDOM_USB_VCPPORT_PICOC:
#if defined(PIOS_INCLUDE_COM)
{
uint8_t * rx_buffer = (uint8_t *) PIOS_malloc(PIOS_COM_PICOC_RX_BUF_LEN);
uint8_t * tx_buffer = (uint8_t *) PIOS_malloc(PIOS_COM_PICOC_TX_BUF_LEN);
PIOS_Assert(rx_buffer);
PIOS_Assert(tx_buffer);
if (PIOS_COM_Init(&pios_com_picoc_id, &pios_usb_cdc_com_driver, pios_usb_cdc_id,
rx_buffer, PIOS_COM_PICOC_RX_BUF_LEN,
tx_buffer, PIOS_COM_PICOC_TX_BUF_LEN)) {
PIOS_Assert(0);
}
}
#endif /* PIOS_INCLUDE_COM */
break;
}
#endif /* PIOS_INCLUDE_USB_CDC */
#if defined(PIOS_INCLUDE_USB_HID)
/* Configure the usb HID port */
uint8_t hw_usb_hidport;
HwFreedomUSB_HIDPortGet(&hw_usb_hidport);
if (!usb_hid_present) {
/* Force HID port function to disabled if we haven't advertised HID in our USB descriptor */
hw_usb_hidport = HWFREEDOM_USB_HIDPORT_DISABLED;
}
uintptr_t pios_usb_hid_id;
if (PIOS_USB_HID_Init(&pios_usb_hid_id, &pios_usb_hid_cfg, pios_usb_id)) {
PIOS_Assert(0);
}
switch (hw_usb_hidport) {
case HWFREEDOM_USB_HIDPORT_DISABLED:
break;
case HWFREEDOM_USB_HIDPORT_USBTELEMETRY:
#if defined(PIOS_INCLUDE_COM)
{
uint8_t * rx_buffer = (uint8_t *) PIOS_malloc(PIOS_COM_TELEM_USB_RX_BUF_LEN);
uint8_t * tx_buffer = (uint8_t *) PIOS_malloc(PIOS_COM_TELEM_USB_TX_BUF_LEN);
PIOS_Assert(rx_buffer);
PIOS_Assert(tx_buffer);
if (PIOS_COM_Init(&pios_com_telem_usb_id, &pios_usb_hid_com_driver, pios_usb_hid_id,
rx_buffer, PIOS_COM_TELEM_USB_RX_BUF_LEN,
tx_buffer, PIOS_COM_TELEM_USB_TX_BUF_LEN)) {
PIOS_Assert(0);
}
}
#endif /* PIOS_INCLUDE_COM */
break;
}
#endif /* PIOS_INCLUDE_USB_HID */
if (usb_hid_present || usb_cdc_present) {
PIOS_USBHOOK_Activate();
}
#endif /* PIOS_INCLUDE_USB */
/* Configure IO ports */
uint8_t hw_DSMxBind;
HwFreedomDSMxBindGet(&hw_DSMxBind);
/* Configure FlexiPort */
uint8_t hw_mainport;
HwFreedomMainPortGet(&hw_mainport);
switch (hw_mainport) {
case HWFREEDOM_MAINPORT_DISABLED:
break;
case HWFREEDOM_MAINPORT_TELEMETRY:
PIOS_Board_configure_com(&pios_usart_main_cfg, PIOS_COM_TELEM_RF_RX_BUF_LEN, PIOS_COM_TELEM_RF_TX_BUF_LEN, &pios_usart_com_driver, &pios_com_telem_rf_id);
break;
case HWFREEDOM_MAINPORT_GPS:
PIOS_Board_configure_com(&pios_usart_main_cfg, PIOS_COM_GPS_RX_BUF_LEN, PIOS_COM_GPS_RX_BUF_LEN, &pios_usart_com_driver, &pios_com_gps_id);
break;
case HWFREEDOM_MAINPORT_DSM:
#if defined(PIOS_INCLUDE_DSM)
{
PIOS_Board_configure_dsm(&pios_usart_dsm_hsum_main_cfg, &pios_dsm_main_cfg,
&pios_usart_com_driver, MANUALCONTROLSETTINGS_CHANNELGROUPS_DSMMAINPORT,&hw_DSMxBind);
}
#endif /* PIOS_INCLUDE_DSM */
break;
case HWFREEDOM_MAINPORT_HOTTSUMD:
case HWFREEDOM_MAINPORT_HOTTSUMH:
#if defined(PIOS_INCLUDE_HSUM)
{
enum pios_hsum_proto proto;
switch (hw_mainport) {
case HWFREEDOM_MAINPORT_HOTTSUMD:
proto = PIOS_HSUM_PROTO_SUMD;
break;
case HWFREEDOM_MAINPORT_HOTTSUMH:
proto = PIOS_HSUM_PROTO_SUMH;
break;
default:
PIOS_Assert(0);
break;
}
PIOS_Board_configure_hsum(&pios_usart_dsm_hsum_main_cfg, &pios_usart_com_driver, &proto, MANUALCONTROLSETTINGS_CHANNELGROUPS_HOTTSUM);
}
#endif /* PIOS_INCLUDE_HSUM */
break;
case HWFREEDOM_MAINPORT_DEBUGCONSOLE:
#if defined(PIOS_INCLUDE_DEBUG_CONSOLE)
{
PIOS_Board_configure_com(&pios_usart_main_cfg, 0, PIOS_COM_DEBUGCONSOLE_TX_BUF_LEN, &pios_usart_com_driver, &pios_com_debug_id);
}
#endif /* PIOS_INCLUDE_DEBUG_CONSOLE */
break;
case HWFREEDOM_MAINPORT_COMBRIDGE:
PIOS_Board_configure_com(&pios_usart_main_cfg, PIOS_COM_BRIDGE_RX_BUF_LEN, PIOS_COM_BRIDGE_TX_BUF_LEN, &pios_usart_com_driver, &pios_com_bridge_id);
break;
case HWFREEDOM_MAINPORT_MAVLINKTX:
#if defined(PIOS_INCLUDE_MAVLINK)
PIOS_Board_configure_com(&pios_usart_main_cfg, 0, PIOS_COM_MAVLINK_TX_BUF_LEN, &pios_usart_com_driver, &pios_com_mavlink_id);
#endif /* PIOS_INCLUDE_MAVLINK */
break;
case HWFREEDOM_MAINPORT_MAVLINKTX_GPS_RX:
#if defined(PIOS_INCLUDE_GPS)
#if defined(PIOS_INCLUDE_MAVLINK)
PIOS_Board_configure_com(&pios_usart_main_cfg, PIOS_COM_GPS_RX_BUF_LEN, PIOS_COM_MAVLINK_TX_BUF_LEN, &pios_usart_com_driver, &pios_com_gps_id);
pios_com_mavlink_id = pios_com_gps_id;
#endif /* PIOS_INCLUDE_MAVLINK */
#endif /* PIOS_INCLUDE_GPS */
break;
case HWFREEDOM_MAINPORT_HOTTTELEMETRY:
#if defined(PIOS_INCLUDE_HOTT) && defined(PIOS_INCLUDE_USART) && defined(PIOS_INCLUDE_COM)
PIOS_Board_configure_com(&pios_usart_main_cfg, PIOS_COM_HOTT_RX_BUF_LEN, PIOS_COM_HOTT_TX_BUF_LEN, &pios_usart_com_driver, &pios_com_hott_id);
#endif /* PIOS_INCLUDE_HOTT */
break;
case HWFREEDOM_MAINPORT_FRSKYSENSORHUB:
#if defined(PIOS_INCLUDE_FRSKY_SENSOR_HUB) && defined(PIOS_INCLUDE_USART) && defined(PIOS_INCLUDE_COM)
PIOS_Board_configure_com(&pios_usart_main_cfg, 0, PIOS_COM_FRSKYSENSORHUB_TX_BUF_LEN, &pios_usart_com_driver, &pios_com_frsky_sensor_hub_id);
#endif /* PIOS_INCLUDE_FRSKY_SENSOR_HUB */
break;
case HWFREEDOM_MAINPORT_LIGHTTELEMETRYTX:
#if defined(PIOS_INCLUDE_LIGHTTELEMETRY)
PIOS_Board_configure_com(&pios_usart_main_cfg, 0, PIOS_COM_LIGHTTELEMETRY_TX_BUF_LEN, &pios_usart_com_driver, &pios_com_lighttelemetry_id);
#endif
break;
case HWFREEDOM_MAINPORT_PICOC:
#if defined(PIOS_INCLUDE_PICOC) && defined(PIOS_INCLUDE_USART) && defined(PIOS_INCLUDE_COM)
PIOS_Board_configure_com(&pios_usart_main_cfg, PIOS_COM_PICOC_RX_BUF_LEN, PIOS_COM_PICOC_TX_BUF_LEN, &pios_usart_com_driver, &pios_com_picoc_id);
#endif /* PIOS_INCLUDE_PICOC */
break;
case HWFREEDOM_MAINPORT_FRSKYSPORTTELEMETRY:
#if defined(PIOS_INCLUDE_FRSKY_SPORT_TELEMETRY) && defined(PIOS_INCLUDE_USART) && defined(PIOS_INCLUDE_COM)
PIOS_Board_configure_com(&pios_usart_main_cfg, PIOS_COM_FRSKYSPORT_RX_BUF_LEN, PIOS_COM_FRSKYSPORT_TX_BUF_LEN, &pios_usart_com_driver, &pios_com_frsky_sport_id);
#endif /* PIOS_INCLUDE_FRSKY_SPORT_TELEMETRY */
break;
} /* hw_freedom_mainport */
/* Configure flexi USART port */
uint8_t hw_flexiport;
HwFreedomFlexiPortGet(&hw_flexiport);
switch (hw_flexiport) {
case HWFREEDOM_FLEXIPORT_DISABLED:
break;
case HWFREEDOM_FLEXIPORT_TELEMETRY:
PIOS_Board_configure_com(&pios_usart_flexi_cfg, PIOS_COM_TELEM_RF_RX_BUF_LEN, PIOS_COM_TELEM_RF_TX_BUF_LEN, &pios_usart_com_driver, &pios_com_telem_rf_id);
break;
case HWFREEDOM_FLEXIPORT_GPS:
PIOS_Board_configure_com(&pios_usart_flexi_cfg, PIOS_COM_GPS_RX_BUF_LEN, PIOS_COM_GPS_RX_BUF_LEN, &pios_usart_com_driver, &pios_com_gps_id);
break;
case HWFREEDOM_FLEXIPORT_DSM:
#if defined(PIOS_INCLUDE_DSM)
{
//TODO: Define the various Channelgroup for Revo dsm inputs and handle here
PIOS_Board_configure_dsm(&pios_usart_dsm_hsum_flexi_cfg, &pios_dsm_flexi_cfg,
&pios_usart_com_driver, MANUALCONTROLSETTINGS_CHANNELGROUPS_DSMFLEXIPORT,&hw_DSMxBind);
}
#endif /* PIOS_INCLUDE_DSM */
break;
case HWFREEDOM_FLEXIPORT_HOTTSUMD:
case HWFREEDOM_FLEXIPORT_HOTTSUMH:
#if defined(PIOS_INCLUDE_HSUM)
{
enum pios_hsum_proto proto;
switch (hw_flexiport) {
case HWFREEDOM_FLEXIPORT_HOTTSUMD:
proto = PIOS_HSUM_PROTO_SUMD;
break;
case HWFREEDOM_FLEXIPORT_HOTTSUMH:
proto = PIOS_HSUM_PROTO_SUMH;
break;
default:
PIOS_Assert(0);
break;
}
PIOS_Board_configure_hsum(&pios_usart_dsm_hsum_flexi_cfg, &pios_usart_com_driver, &proto, MANUALCONTROLSETTINGS_CHANNELGROUPS_HOTTSUM);
}
#endif /* PIOS_INCLUDE_HSUM */
break;
case HWFREEDOM_FLEXIPORT_I2C:
#if defined(PIOS_INCLUDE_I2C)
{
if (PIOS_I2C_Init(&pios_i2c_flexiport_adapter_id, &pios_i2c_flexiport_adapter_cfg)) {
PIOS_Assert(0);
}
}
#endif /* PIOS_INCLUDE_I2C */
break;
case HWFREEDOM_FLEXIPORT_DEBUGCONSOLE:
#if defined(PIOS_INCLUDE_DEBUG_CONSOLE)
{
PIOS_Board_configure_com(&pios_usart_flexi_cfg, 0, PIOS_COM_DEBUGCONSOLE_TX_BUF_LEN, &pios_usart_com_driver, &pios_com_debug_id);
}
#endif /* PIOS_INCLUDE_DEBUG_CONSOLE */
break;
case HWFREEDOM_FLEXIPORT_COMBRIDGE:
PIOS_Board_configure_com(&pios_usart_flexi_cfg, PIOS_COM_BRIDGE_RX_BUF_LEN, PIOS_COM_BRIDGE_TX_BUF_LEN, &pios_usart_com_driver, &pios_com_bridge_id);
break;
case HWFREEDOM_FLEXIPORT_MAVLINKTX:
#if defined(PIOS_INCLUDE_MAVLINK)
PIOS_Board_configure_com(&pios_usart_flexi_cfg, 0, PIOS_COM_MAVLINK_TX_BUF_LEN, &pios_usart_com_driver, &pios_com_mavlink_id);
#endif /* PIOS_INCLUDE_MAVLINK */
break;
case HWFREEDOM_FLEXIPORT_MAVLINKTX_GPS_RX:
#if defined(PIOS_INCLUDE_GPS)
#if defined(PIOS_INCLUDE_MAVLINK)
PIOS_Board_configure_com(&pios_usart_flexi_cfg, PIOS_COM_GPS_RX_BUF_LEN, PIOS_COM_MAVLINK_TX_BUF_LEN, &pios_usart_com_driver, &pios_com_gps_id);
pios_com_mavlink_id = pios_com_gps_id;
#endif /* PIOS_INCLUDE_MAVLINK */
#endif /* PIOS_INCLUDE_GPS */
break;
case HWFREEDOM_FLEXIPORT_HOTTTELEMETRY:
#if defined(PIOS_INCLUDE_HOTT) && defined(PIOS_INCLUDE_USART) && defined(PIOS_INCLUDE_COM)
PIOS_Board_configure_com(&pios_usart_flexi_cfg, PIOS_COM_HOTT_RX_BUF_LEN, PIOS_COM_HOTT_TX_BUF_LEN, &pios_usart_com_driver, &pios_com_hott_id);
#endif /* PIOS_INCLUDE_HOTT */
break;
case HWFREEDOM_FLEXIPORT_FRSKYSENSORHUB:
#if defined(PIOS_INCLUDE_FRSKY_SENSOR_HUB) && defined(PIOS_INCLUDE_USART) && defined(PIOS_INCLUDE_COM)
PIOS_Board_configure_com(&pios_usart_flexi_cfg, 0, PIOS_COM_FRSKYSENSORHUB_TX_BUF_LEN, &pios_usart_com_driver, &pios_com_frsky_sensor_hub_id);
#endif /* PIOS_INCLUDE_FRSKY_SENSOR_HUB */
break;
case HWFREEDOM_FLEXIPORT_LIGHTTELEMETRYTX:
#if defined(PIOS_INCLUDE_LIGHTTELEMETRY)
PIOS_Board_configure_com(&pios_usart_flexi_cfg, 0, PIOS_COM_LIGHTTELEMETRY_TX_BUF_LEN, &pios_usart_com_driver, &pios_com_lighttelemetry_id);
#endif
break;
case HWFREEDOM_FLEXIPORT_PICOC:
#if defined(PIOS_INCLUDE_PICOC) && defined(PIOS_INCLUDE_USART) && defined(PIOS_INCLUDE_COM)
PIOS_Board_configure_com(&pios_usart_flexi_cfg, PIOS_COM_PICOC_RX_BUF_LEN, PIOS_COM_PICOC_TX_BUF_LEN, &pios_usart_com_driver, &pios_com_picoc_id);
#endif /* PIOS_INCLUDE_PICOC */
break;
case HWFREEDOM_FLEXIPORT_FRSKYSPORTTELEMETRY:
#if defined(PIOS_INCLUDE_FRSKY_SPORT_TELEMETRY) && defined(PIOS_INCLUDE_USART) && defined(PIOS_INCLUDE_COM)
PIOS_Board_configure_com(&pios_usart_flexi_cfg, PIOS_COM_FRSKYSPORT_RX_BUF_LEN, PIOS_COM_FRSKYSPORT_TX_BUF_LEN, &pios_usart_com_driver, &pios_com_frsky_sport_id);
#endif /* PIOS_INCLUDE_FRSKY_SPORT_TELEMETRY */
break;
} /* hw_freedom_flexiport */
/* Initalize the RFM22B radio COM device. */
#if defined(PIOS_INCLUDE_RFM22B)
RFM22BStatusInitialize();
RFM22BStatusCreateInstance();
// Initialize out status object.
RFM22BStatusData rfm22bstatus;
RFM22BStatusGet(&rfm22bstatus);
RFM22BStatusInstSet(1,&rfm22bstatus);
HwFreedomData hwFreedom;
HwFreedomGet(&hwFreedom);
// Initialize out status object.
rfm22bstatus.BoardType = bdinfo->board_type;
rfm22bstatus.BoardRevision = bdinfo->board_rev;
if (hwFreedom.Radio == HWFREEDOM_RADIO_DISABLED || hwFreedom.MaxRfPower == HWFREEDOM_MAXRFPOWER_0) {
// When radio disabled, it is ok for init to fail. This allows boards without populating
// this component.
const struct pios_rfm22b_cfg *rfm22b_cfg = PIOS_BOARD_HW_DEFS_GetRfm22Cfg(bdinfo->board_rev);
if (PIOS_RFM22B_Init(&pios_rfm22b_id, PIOS_RFM22_SPI_PORT, rfm22b_cfg->slave_num, rfm22b_cfg) == 0) {
PIOS_RFM22B_SetTxPower(pios_rfm22b_id, RFM22_tx_pwr_txpow_0);
rfm22bstatus.DeviceID = PIOS_RFM22B_DeviceID(pios_rfm22b_id);
rfm22bstatus.BoardRevision = PIOS_RFM22B_ModuleVersion(pios_rfm22b_id);
} else {
pios_rfm22b_id = 0;
}
rfm22bstatus.LinkState = RFM22BSTATUS_LINKSTATE_DISABLED;
} else {
// always allow receiving PPM when radio is on
bool ppm_mode = hwFreedom.Radio == HWFREEDOM_RADIO_TELEMPPM || hwFreedom.Radio == HWFREEDOM_RADIO_PPM;
bool ppm_only = hwFreedom.Radio == HWFREEDOM_RADIO_PPM;
bool is_oneway = hwFreedom.Radio == HWFREEDOM_RADIO_PPM; // Sparky2 can only receive PPM only
/* Configure the RFM22B device. */
const struct pios_rfm22b_cfg *rfm22b_cfg = PIOS_BOARD_HW_DEFS_GetRfm22Cfg(bdinfo->board_rev);
if (PIOS_RFM22B_Init(&pios_rfm22b_id, PIOS_RFM22_SPI_PORT, rfm22b_cfg->slave_num, rfm22b_cfg)) {
panic(6);
}
rfm22bstatus.DeviceID = PIOS_RFM22B_DeviceID(pios_rfm22b_id);
rfm22bstatus.BoardRevision = PIOS_RFM22B_ModuleVersion(pios_rfm22b_id);
/* Configure the radio com interface */
uint8_t *rx_buffer = (uint8_t *)PIOS_malloc(PIOS_COM_RFM22B_RF_RX_BUF_LEN);
uint8_t *tx_buffer = (uint8_t *)PIOS_malloc(PIOS_COM_RFM22B_RF_TX_BUF_LEN);
PIOS_Assert(rx_buffer);
PIOS_Assert(tx_buffer);
if (PIOS_COM_Init(&pios_com_rf_id, &pios_rfm22b_com_driver, pios_rfm22b_id,
rx_buffer, PIOS_COM_RFM22B_RF_RX_BUF_LEN,
tx_buffer, PIOS_COM_RFM22B_RF_TX_BUF_LEN)) {
panic(6);
}
/* Set Telemetry to use RFM22b if no other telemetry is configured (USB always overrides anyway) */
if (!pios_com_telem_rf_id) {
pios_com_telem_rf_id = pios_com_rf_id;
}
rfm22bstatus.LinkState = RFM22BSTATUS_LINKSTATE_ENABLED;
enum rfm22b_datarate datarate = RFM22_datarate_64000;
switch (hwFreedom.MaxRfSpeed) {
case HWFREEDOM_MAXRFSPEED_9600:
datarate = RFM22_datarate_9600;
break;
case HWFREEDOM_MAXRFSPEED_19200:
datarate = RFM22_datarate_19200;
break;
case HWFREEDOM_MAXRFSPEED_32000:
datarate = RFM22_datarate_32000;
break;
case HWFREEDOM_MAXRFSPEED_64000:
datarate = RFM22_datarate_64000;
break;
case HWFREEDOM_MAXRFSPEED_100000:
datarate = RFM22_datarate_100000;
break;
case HWFREEDOM_MAXRFSPEED_192000:
datarate = RFM22_datarate_192000;
break;
}
/* Set the radio configuration parameters. */
PIOS_RFM22B_Config(pios_rfm22b_id, datarate, hwFreedom.MinChannel, hwFreedom.MaxChannel, hwFreedom.CoordID, is_oneway, ppm_mode, ppm_only);
/* Set the modem Tx poer level */
switch (hwFreedom.MaxRfPower) {
case HWFREEDOM_MAXRFPOWER_125:
PIOS_RFM22B_SetTxPower(pios_rfm22b_id, RFM22_tx_pwr_txpow_0);
break;
case HWFREEDOM_MAXRFPOWER_16:
PIOS_RFM22B_SetTxPower(pios_rfm22b_id, RFM22_tx_pwr_txpow_1);
break;
case HWFREEDOM_MAXRFPOWER_316:
PIOS_RFM22B_SetTxPower(pios_rfm22b_id, RFM22_tx_pwr_txpow_2);
break;
case HWFREEDOM_MAXRFPOWER_63:
PIOS_RFM22B_SetTxPower(pios_rfm22b_id, RFM22_tx_pwr_txpow_3);
break;
case HWFREEDOM_MAXRFPOWER_126:
PIOS_RFM22B_SetTxPower(pios_rfm22b_id, RFM22_tx_pwr_txpow_4);
break;
case HWFREEDOM_MAXRFPOWER_25:
PIOS_RFM22B_SetTxPower(pios_rfm22b_id, RFM22_tx_pwr_txpow_5);
break;
case HWFREEDOM_MAXRFPOWER_50:
PIOS_RFM22B_SetTxPower(pios_rfm22b_id, RFM22_tx_pwr_txpow_6);
break;
case HWFREEDOM_MAXRFPOWER_100:
PIOS_RFM22B_SetTxPower(pios_rfm22b_id, RFM22_tx_pwr_txpow_7);
break;
default:
// do nothing
break;
}
/* Reinitialize the modem. */
PIOS_RFM22B_Reinit(pios_rfm22b_id);
#if defined(PIOS_INCLUDE_RFM22B_RCVR)
{
uintptr_t pios_rfm22brcvr_id;
PIOS_RFM22B_Rcvr_Init(&pios_rfm22brcvr_id, pios_rfm22b_id);
uintptr_t pios_rfm22brcvr_rcvr_id;
if (PIOS_RCVR_Init(&pios_rfm22brcvr_rcvr_id, &pios_rfm22b_rcvr_driver, pios_rfm22brcvr_id)) {
panic(6);
}
pios_rcvr_group_map[MANUALCONTROLSETTINGS_CHANNELGROUPS_RFM22B] = pios_rfm22brcvr_rcvr_id;
}
}
RFM22BStatusInstSet(1,&rfm22bstatus);
#endif /* PIOS_INCLUDE_RFM22B_RCVR */
#endif /* PIOS_INCLUDE_RFM22B */
PIOS_WDG_Clear();
/* Configure input receiver USART port */
uint8_t hw_rcvrport;
HwFreedomRcvrPortGet(&hw_rcvrport);
switch (hw_rcvrport) {
case HWFREEDOM_RCVRPORT_DISABLED:
break;
case HWFREEDOM_RCVRPORT_PPM:
{
uintptr_t pios_ppm_id;
PIOS_PPM_Init(&pios_ppm_id, &pios_ppm_cfg);
uintptr_t pios_ppm_rcvr_id;
if (PIOS_RCVR_Init(&pios_ppm_rcvr_id, &pios_ppm_rcvr_driver, pios_ppm_id)) {
PIOS_Assert(0);
}
pios_rcvr_group_map[MANUALCONTROLSETTINGS_CHANNELGROUPS_PPM] = pios_ppm_rcvr_id;
}
break;
case HWFREEDOM_RCVRPORT_DSM:
#if defined(PIOS_INCLUDE_DSM)
{
//TODO: Define the various Channelgroup for Revo dsm inputs and handle here
PIOS_Board_configure_dsm(&pios_usart_dsm_hsum_rcvr_cfg, &pios_dsm_rcvr_cfg,
&pios_usart_com_driver, MANUALCONTROLSETTINGS_CHANNELGROUPS_DSMRCVRPORT,&hw_DSMxBind);
}
#endif /* PIOS_INCLUDE_DSM */
break;
case HWFREEDOM_RCVRPORT_HOTTSUMD:
case HWFREEDOM_RCVRPORT_HOTTSUMH:
#if defined(PIOS_INCLUDE_HSUM)
{
enum pios_hsum_proto proto;
switch (hw_rcvrport) {
case HWFREEDOM_RCVRPORT_HOTTSUMD:
proto = PIOS_HSUM_PROTO_SUMD;
break;
case HWFREEDOM_RCVRPORT_HOTTSUMH:
proto = PIOS_HSUM_PROTO_SUMH;
break;
default:
PIOS_Assert(0);
break;
}
PIOS_Board_configure_hsum(&pios_usart_dsm_hsum_rcvr_cfg, &pios_usart_com_driver, &proto, MANUALCONTROLSETTINGS_CHANNELGROUPS_HOTTSUM);
}
#endif /* PIOS_INCLUDE_HSUM */
break;
case HWFREEDOM_RCVRPORT_SBUS:
#if defined(PIOS_INCLUDE_SBUS)
{
uintptr_t pios_usart_sbus_id;
if (PIOS_USART_Init(&pios_usart_sbus_id, &pios_usart_sbus_rcvr_cfg)) {
PIOS_Assert(0);
}
uintptr_t pios_sbus_id;
if (PIOS_SBus_Init(&pios_sbus_id, &pios_sbus_cfg, &pios_usart_com_driver, pios_usart_sbus_id)) {
PIOS_Assert(0);
}
uintptr_t pios_sbus_rcvr_id;
if (PIOS_RCVR_Init(&pios_sbus_rcvr_id, &pios_sbus_rcvr_driver, pios_sbus_id)) {
PIOS_Assert(0);
}
pios_rcvr_group_map[MANUALCONTROLSETTINGS_CHANNELGROUPS_SBUS] = pios_sbus_rcvr_id;
}
#endif
break;
}
if (hw_rcvrport != HWFREEDOM_RCVRPORT_SBUS) {
GPIO_Init(pios_sbus_cfg.inv.gpio, (GPIO_InitTypeDef*)&pios_sbus_cfg.inv.init);
GPIO_WriteBit(pios_sbus_cfg.inv.gpio, pios_sbus_cfg.inv.init.GPIO_Pin, pios_sbus_cfg.gpio_inv_disable);
}
#if defined(PIOS_OVERO_SPI)
/* Set up the SPI based PIOS_COM interface to the overo */
{
bool overo_enabled = false;
#ifdef MODULE_OveroSync_BUILTIN
overo_enabled = true;
#else
uint8_t module_state[MODULESETTINGS_ADMINSTATE_NUMELEM];
ModuleSettingsAdminStateGet(module_state);
if (module_state[MODULESETTINGS_ADMINSTATE_OVEROSYNC] == MODULESETTINGS_ADMINSTATE_ENABLED) {
overo_enabled = true;
} else {
overo_enabled = false;
}
#endif
if (overo_enabled) {
if (PIOS_OVERO_Init(&pios_overo_id, &pios_overo_cfg)) {
PIOS_DEBUG_Assert(0);
}
const uint32_t PACKET_SIZE = 1024;
uint8_t * rx_buffer = (uint8_t *) PIOS_malloc(PACKET_SIZE);
uint8_t * tx_buffer = (uint8_t *) PIOS_malloc(PACKET_SIZE);
PIOS_Assert(rx_buffer);
PIOS_Assert(tx_buffer);
if (PIOS_COM_Init(&pios_com_overo_id, &pios_overo_com_driver, pios_overo_id,
rx_buffer, PACKET_SIZE,
tx_buffer, PACKET_SIZE)) {
PIOS_Assert(0);
}
}
}
#endif
#if defined(PIOS_INCLUDE_GCSRCVR)
GCSReceiverInitialize();
uintptr_t pios_gcsrcvr_id;
PIOS_GCSRCVR_Init(&pios_gcsrcvr_id);
uintptr_t pios_gcsrcvr_rcvr_id;
if (PIOS_RCVR_Init(&pios_gcsrcvr_rcvr_id, &pios_gcsrcvr_rcvr_driver, pios_gcsrcvr_id)) {
PIOS_Assert(0);
}
pios_rcvr_group_map[MANUALCONTROLSETTINGS_CHANNELGROUPS_GCS] = pios_gcsrcvr_rcvr_id;
#endif /* PIOS_INCLUDE_GCSRCVR */
#ifndef PIOS_DEBUG_ENABLE_DEBUG_PINS
uint8_t hw_output_port;
HwFreedomOutputGet(&hw_output_port);
switch (hw_output_port) {
case HWFREEDOM_OUTPUT_DISABLED:
break;
case HWFREEDOM_OUTPUT_PWM:
/* Set up the servo outputs */
PIOS_Servo_Init(&pios_servo_cfg);
break;
default:
break;
}
#else
PIOS_DEBUG_Init(&pios_tim_servo_all_channels, NELEMENTS(pios_tim_servo_all_channels));
#endif
PIOS_DELAY_WaitmS(200);
PIOS_SENSORS_Init();
#if defined(PIOS_INCLUDE_MPU6000)
if (PIOS_MPU6000_Init(pios_spi_gyro_id,0, &pios_mpu6000_cfg) != 0)
panic(2);
if (PIOS_MPU6000_Test() != 0)
panic(2);
// To be safe map from UAVO enum to driver enum
uint8_t hw_gyro_range;
HwFreedomGyroRangeGet(&hw_gyro_range);
switch(hw_gyro_range) {
case HWFREEDOM_GYRORANGE_250:
PIOS_MPU6000_SetGyroRange(PIOS_MPU60X0_SCALE_250_DEG);
break;
case HWFREEDOM_GYRORANGE_500:
PIOS_MPU6000_SetGyroRange(PIOS_MPU60X0_SCALE_500_DEG);
break;
case HWFREEDOM_GYRORANGE_1000:
PIOS_MPU6000_SetGyroRange(PIOS_MPU60X0_SCALE_1000_DEG);
break;
case HWFREEDOM_GYRORANGE_2000:
PIOS_MPU6000_SetGyroRange(PIOS_MPU60X0_SCALE_2000_DEG);
break;
}
uint8_t hw_accel_range;
HwFreedomAccelRangeGet(&hw_accel_range);
switch(hw_accel_range) {
case HWFREEDOM_ACCELRANGE_2G:
PIOS_MPU6000_SetAccelRange(PIOS_MPU60X0_ACCEL_2G);
break;
case HWFREEDOM_ACCELRANGE_4G:
PIOS_MPU6000_SetAccelRange(PIOS_MPU60X0_ACCEL_4G);
break;
case HWFREEDOM_ACCELRANGE_8G:
PIOS_MPU6000_SetAccelRange(PIOS_MPU60X0_ACCEL_8G);
break;
case HWFREEDOM_ACCELRANGE_16G:
PIOS_MPU6000_SetAccelRange(PIOS_MPU60X0_ACCEL_16G);
break;
}
// the filter has to be set before rate else divisor calculation will fail
uint8_t hw_mpu6000_dlpf;
HwFreedomMPU6000DLPFGet(&hw_mpu6000_dlpf);
enum pios_mpu60x0_filter mpu6000_dlpf = \
(hw_mpu6000_dlpf == HWFREEDOM_MPU6000DLPF_256) ? PIOS_MPU60X0_LOWPASS_256_HZ : \
(hw_mpu6000_dlpf == HWFREEDOM_MPU6000DLPF_188) ? PIOS_MPU60X0_LOWPASS_188_HZ : \
(hw_mpu6000_dlpf == HWFREEDOM_MPU6000DLPF_98) ? PIOS_MPU60X0_LOWPASS_98_HZ : \
(hw_mpu6000_dlpf == HWFREEDOM_MPU6000DLPF_42) ? PIOS_MPU60X0_LOWPASS_42_HZ : \
(hw_mpu6000_dlpf == HWFREEDOM_MPU6000DLPF_20) ? PIOS_MPU60X0_LOWPASS_20_HZ : \
(hw_mpu6000_dlpf == HWFREEDOM_MPU6000DLPF_10) ? PIOS_MPU60X0_LOWPASS_10_HZ : \
(hw_mpu6000_dlpf == HWFREEDOM_MPU6000DLPF_5) ? PIOS_MPU60X0_LOWPASS_5_HZ : \
pios_mpu6000_cfg.default_filter;
PIOS_MPU6000_SetLPF(mpu6000_dlpf);
uint8_t hw_mpu6000_samplerate;
HwFreedomMPU6000RateGet(&hw_mpu6000_samplerate);
uint16_t mpu6000_samplerate = \
(hw_mpu6000_samplerate == HWFREEDOM_MPU6000RATE_200) ? 200 : \
(hw_mpu6000_samplerate == HWFREEDOM_MPU6000RATE_333) ? 333 : \
(hw_mpu6000_samplerate == HWFREEDOM_MPU6000RATE_500) ? 500 : \
(hw_mpu6000_samplerate == HWFREEDOM_MPU6000RATE_666) ? 666 : \
(hw_mpu6000_samplerate == HWFREEDOM_MPU6000RATE_1000) ? 1000 : \
(hw_mpu6000_samplerate == HWFREEDOM_MPU6000RATE_2000) ? 2000 : \
(hw_mpu6000_samplerate == HWFREEDOM_MPU6000RATE_4000) ? 4000 : \
(hw_mpu6000_samplerate == HWFREEDOM_MPU6000RATE_8000) ? 8000 : \
pios_mpu6000_cfg.default_samplerate;
PIOS_MPU6000_SetSampleRate(mpu6000_samplerate);
#endif
if (PIOS_I2C_Init(&pios_i2c_mag_pressure_adapter_id, &pios_i2c_mag_pressure_adapter_cfg)) {
PIOS_DEBUG_Assert(0);
}
if (PIOS_I2C_CheckClear(pios_i2c_mag_pressure_adapter_id) != 0)
panic(5);
PIOS_DELAY_WaitmS(50);
#if defined(PIOS_INCLUDE_ADC)
uint32_t internal_adc_id;
PIOS_INTERNAL_ADC_Init(&internal_adc_id, &pios_adc_cfg);
PIOS_ADC_Init(&pios_internal_adc_id, &pios_internal_adc_driver, internal_adc_id);
#endif
PIOS_LED_On(0);
#if defined(PIOS_INCLUDE_HMC5883)
if (PIOS_HMC5883_Init(pios_i2c_mag_pressure_adapter_id, &pios_hmc5883_cfg) != 0)
panic(3);
#endif
PIOS_LED_On(1);
#if defined(PIOS_INCLUDE_MS5611)
if (PIOS_MS5611_Init(&pios_ms5611_cfg, pios_i2c_mag_pressure_adapter_id) != 0)
panic(4);
#endif
PIOS_LED_On(2);
}
void PIOS_Board_Init(void) {
/* Delay system */
PIOS_DELAY_Init();
const struct pios_board_info * bdinfo = &pios_board_info_blob;
#if defined(PIOS_INCLUDE_LED)
const struct pios_led_cfg * led_cfg = PIOS_BOARD_HW_DEFS_GetLedCfg(bdinfo->board_rev);
PIOS_Assert(led_cfg);
PIOS_LED_Init(led_cfg);
#endif /* PIOS_INCLUDE_LED */
/* Set up the SPI interface to the gyro/acelerometer */
if (PIOS_SPI_Init(&pios_spi_gyro_id, &pios_spi_gyro_cfg)) {
PIOS_DEBUG_Assert(0);
}
/* Set up the SPI interface to the flash and rfm22b */
if (PIOS_SPI_Init(&pios_spi_telem_flash_id, &pios_spi_telem_flash_cfg)) {
PIOS_DEBUG_Assert(0);
}
#if defined(PIOS_INCLUDE_FLASH)
/* Inititialize all flash drivers */
PIOS_Flash_Jedec_Init(&pios_external_flash_id, pios_spi_telem_flash_id, 1, &flash_m25p_cfg);
PIOS_Flash_Internal_Init(&pios_internal_flash_id, &flash_internal_cfg);
/* Register the partition table */
const struct pios_flash_partition * flash_partition_table;
uint32_t num_partitions;
flash_partition_table = PIOS_BOARD_HW_DEFS_GetPartitionTable(bdinfo->board_rev, &num_partitions);
PIOS_FLASH_register_partition_table(flash_partition_table, num_partitions);
/* Mount all filesystems */
PIOS_FLASHFS_Logfs_Init(&pios_uavo_settings_fs_id, &flashfs_settings_cfg, FLASH_PARTITION_LABEL_SETTINGS);
PIOS_FLASHFS_Logfs_Init(&pios_waypoints_settings_fs_id, &flashfs_waypoints_cfg, FLASH_PARTITION_LABEL_WAYPOINTS);
#endif /* PIOS_INCLUDE_FLASH */
/* Initialize the task monitor library */
TaskMonitorInitialize();
/* Initialize UAVObject libraries */
EventDispatcherInitialize();
UAVObjInitialize();
/* Initialize the alarms library */
AlarmsInitialize();
HwRevoMiniInitialize();
ModuleSettingsInitialize();
#if defined(PIOS_INCLUDE_RTC)
PIOS_RTC_Init(&pios_rtc_main_cfg);
#endif
#ifndef ERASE_FLASH
/* Initialize watchdog as early as possible to catch faults during init
* but do it only if there is no debugger connected
*/
if ((CoreDebug->DHCSR & CoreDebug_DHCSR_C_DEBUGEN_Msk) == 0) {
PIOS_WDG_Init();
}
#endif
/* Set up pulse timers */
PIOS_TIM_InitClock(&tim_1_cfg);
PIOS_TIM_InitClock(&tim_3_cfg);
PIOS_TIM_InitClock(&tim_4_cfg);
PIOS_TIM_InitClock(&tim_5_cfg);
PIOS_TIM_InitClock(&tim_8_cfg);
PIOS_TIM_InitClock(&tim_9_cfg);
PIOS_TIM_InitClock(&tim_10_cfg);
PIOS_TIM_InitClock(&tim_11_cfg);
PIOS_TIM_InitClock(&tim_12_cfg);
/* IAP System Setup */
PIOS_IAP_Init();
uint16_t boot_count = PIOS_IAP_ReadBootCount();
if (boot_count < 3) {
PIOS_IAP_WriteBootCount(++boot_count);
AlarmsClear(SYSTEMALARMS_ALARM_BOOTFAULT);
} else {
/* Too many failed boot attempts, force hw config to defaults */
HwRevoMiniSetDefaults(HwRevoMiniHandle(), 0);
ModuleSettingsSetDefaults(ModuleSettingsHandle(),0);
AlarmsSet(SYSTEMALARMS_ALARM_BOOTFAULT, SYSTEMALARMS_ALARM_CRITICAL);
}
//PIOS_IAP_Init();
#if defined(PIOS_INCLUDE_USB)
/* Initialize board specific USB data */
PIOS_USB_BOARD_DATA_Init();
/* Flags to determine if various USB interfaces are advertised */
bool usb_hid_present = false;
bool usb_cdc_present = false;
#if defined(PIOS_INCLUDE_USB_CDC)
if (PIOS_USB_DESC_HID_CDC_Init()) {
PIOS_Assert(0);
}
usb_hid_present = true;
usb_cdc_present = true;
#else
if (PIOS_USB_DESC_HID_ONLY_Init()) {
PIOS_Assert(0);
}
usb_hid_present = true;
#endif
uintptr_t pios_usb_id;
PIOS_USB_Init(&pios_usb_id, PIOS_BOARD_HW_DEFS_GetUsbCfg(bdinfo->board_rev));
#if defined(PIOS_INCLUDE_USB_CDC)
uint8_t hw_usb_vcpport;
/* Configure the USB VCP port */
HwRevoMiniUSB_VCPPortGet(&hw_usb_vcpport);
if (!usb_cdc_present) {
/* Force VCP port function to disabled if we haven't advertised VCP in our USB descriptor */
hw_usb_vcpport = HWREVOMINI_USB_VCPPORT_DISABLED;
}
uintptr_t pios_usb_cdc_id;
if (PIOS_USB_CDC_Init(&pios_usb_cdc_id, &pios_usb_cdc_cfg, pios_usb_id)) {
PIOS_Assert(0);
}
switch (hw_usb_vcpport) {
case HWREVOMINI_USB_VCPPORT_DISABLED:
break;
case HWREVOMINI_USB_VCPPORT_USBTELEMETRY:
#if defined(PIOS_INCLUDE_COM)
{
uint8_t * rx_buffer = (uint8_t *) PIOS_malloc(PIOS_COM_TELEM_USB_RX_BUF_LEN);
uint8_t * tx_buffer = (uint8_t *) PIOS_malloc(PIOS_COM_TELEM_USB_TX_BUF_LEN);
PIOS_Assert(rx_buffer);
PIOS_Assert(tx_buffer);
if (PIOS_COM_Init(&pios_com_telem_usb_id, &pios_usb_cdc_com_driver, pios_usb_cdc_id,
rx_buffer, PIOS_COM_TELEM_USB_RX_BUF_LEN,
tx_buffer, PIOS_COM_TELEM_USB_TX_BUF_LEN)) {
PIOS_Assert(0);
}
}
#endif /* PIOS_INCLUDE_COM */
break;
case HWREVOMINI_USB_VCPPORT_COMBRIDGE:
#if defined(PIOS_INCLUDE_COM)
{
uint8_t * rx_buffer = (uint8_t *) PIOS_malloc(PIOS_COM_BRIDGE_RX_BUF_LEN);
uint8_t * tx_buffer = (uint8_t *) PIOS_malloc(PIOS_COM_BRIDGE_TX_BUF_LEN);
PIOS_Assert(rx_buffer);
PIOS_Assert(tx_buffer);
if (PIOS_COM_Init(&pios_com_vcp_id, &pios_usb_cdc_com_driver, pios_usb_cdc_id,
rx_buffer, PIOS_COM_BRIDGE_RX_BUF_LEN,
tx_buffer, PIOS_COM_BRIDGE_TX_BUF_LEN)) {
PIOS_Assert(0);
}
}
#endif /* PIOS_INCLUDE_COM */
break;
case HWREVOMINI_USB_VCPPORT_DEBUGCONSOLE:
#if defined(PIOS_INCLUDE_COM)
#if defined(PIOS_INCLUDE_DEBUG_CONSOLE)
{
uint8_t * tx_buffer = (uint8_t *) PIOS_malloc(PIOS_COM_DEBUGCONSOLE_TX_BUF_LEN);
PIOS_Assert(tx_buffer);
if (PIOS_COM_Init(&pios_com_debug_id, &pios_usb_cdc_com_driver, pios_usb_cdc_id,
NULL, 0,
tx_buffer, PIOS_COM_DEBUGCONSOLE_TX_BUF_LEN)) {
PIOS_Assert(0);
}
}
#endif /* PIOS_INCLUDE_DEBUG_CONSOLE */
#endif /* PIOS_INCLUDE_COM */
break;
case HWREVOMINI_USB_VCPPORT_PICOC:
#if defined(PIOS_INCLUDE_COM)
{
uint8_t * rx_buffer = (uint8_t *) PIOS_malloc(PIOS_COM_PICOC_RX_BUF_LEN);
uint8_t * tx_buffer = (uint8_t *) PIOS_malloc(PIOS_COM_PICOC_TX_BUF_LEN);
PIOS_Assert(rx_buffer);
PIOS_Assert(tx_buffer);
if (PIOS_COM_Init(&pios_com_picoc_id, &pios_usb_cdc_com_driver, pios_usb_cdc_id,
rx_buffer, PIOS_COM_PICOC_RX_BUF_LEN,
tx_buffer, PIOS_COM_PICOC_TX_BUF_LEN)) {
PIOS_Assert(0);
}
}
#endif /* PIOS_INCLUDE_COM */
break;
}
#endif /* PIOS_INCLUDE_USB_CDC */
#if defined(PIOS_INCLUDE_USB_HID)
/* Configure the usb HID port */
uint8_t hw_usb_hidport;
HwRevoMiniUSB_HIDPortGet(&hw_usb_hidport);
if (!usb_hid_present) {
/* Force HID port function to disabled if we haven't advertised HID in our USB descriptor */
hw_usb_hidport = HWREVOMINI_USB_HIDPORT_DISABLED;
}
uintptr_t pios_usb_hid_id;
if (PIOS_USB_HID_Init(&pios_usb_hid_id, &pios_usb_hid_cfg, pios_usb_id)) {
PIOS_Assert(0);
}
switch (hw_usb_hidport) {
case HWREVOMINI_USB_HIDPORT_DISABLED:
break;
case HWREVOMINI_USB_HIDPORT_USBTELEMETRY:
#if defined(PIOS_INCLUDE_COM)
{
uint8_t * rx_buffer = (uint8_t *) PIOS_malloc(PIOS_COM_TELEM_USB_RX_BUF_LEN);
uint8_t * tx_buffer = (uint8_t *) PIOS_malloc(PIOS_COM_TELEM_USB_TX_BUF_LEN);
PIOS_Assert(rx_buffer);
PIOS_Assert(tx_buffer);
if (PIOS_COM_Init(&pios_com_telem_usb_id, &pios_usb_hid_com_driver, pios_usb_hid_id,
rx_buffer, PIOS_COM_TELEM_USB_RX_BUF_LEN,
tx_buffer, PIOS_COM_TELEM_USB_TX_BUF_LEN)) {
PIOS_Assert(0);
}
}
#endif /* PIOS_INCLUDE_COM */
break;
}
#endif /* PIOS_INCLUDE_USB_HID */
if (usb_hid_present || usb_cdc_present) {
PIOS_USBHOOK_Activate();
}
#endif /* PIOS_INCLUDE_USB */
/* Configure IO ports */
uint8_t hw_DSMxBind;
HwRevoMiniDSMxBindGet(&hw_DSMxBind);
/* Configure main USART port */
uint8_t hw_mainport;
HwRevoMiniMainPortGet(&hw_mainport);
switch (hw_mainport) {
case HWREVOMINI_MAINPORT_DISABLED:
break;
case HWREVOMINI_MAINPORT_TELEMETRY:
PIOS_Board_configure_com(&pios_usart_main_cfg, PIOS_COM_TELEM_RF_RX_BUF_LEN, PIOS_COM_TELEM_RF_TX_BUF_LEN, &pios_usart_com_driver, &pios_com_telem_rf_id);
break;
case HWREVOMINI_MAINPORT_GPS:
PIOS_Board_configure_com(&pios_usart_main_cfg, PIOS_COM_GPS_RX_BUF_LEN, PIOS_COM_GPS_TX_BUF_LEN, &pios_usart_com_driver, &pios_com_gps_id);
break;
case HWREVOMINI_MAINPORT_SBUS:
#if defined(PIOS_INCLUDE_SBUS)
{
uintptr_t pios_usart_sbus_id;
if (PIOS_USART_Init(&pios_usart_sbus_id, &pios_usart_sbus_main_cfg)) {
PIOS_Assert(0);
}
uintptr_t pios_sbus_id;
if (PIOS_SBus_Init(&pios_sbus_id, &pios_sbus_cfg, &pios_usart_com_driver, pios_usart_sbus_id)) {
PIOS_Assert(0);
}
uintptr_t pios_sbus_rcvr_id;
if (PIOS_RCVR_Init(&pios_sbus_rcvr_id, &pios_sbus_rcvr_driver, pios_sbus_id)) {
PIOS_Assert(0);
}
pios_rcvr_group_map[MANUALCONTROLSETTINGS_CHANNELGROUPS_SBUS] = pios_sbus_rcvr_id;
}
#endif
break;
case HWREVOMINI_MAINPORT_DSM2:
case HWREVOMINI_MAINPORT_DSMX10BIT:
case HWREVOMINI_MAINPORT_DSMX11BIT:
#if defined(PIOS_INCLUDE_DSM)
{
enum pios_dsm_proto proto;
switch (hw_mainport) {
case HWREVOMINI_MAINPORT_DSM2:
proto = PIOS_DSM_PROTO_DSM2;
break;
case HWREVOMINI_MAINPORT_DSMX10BIT:
proto = PIOS_DSM_PROTO_DSMX10BIT;
break;
case HWREVOMINI_MAINPORT_DSMX11BIT:
proto = PIOS_DSM_PROTO_DSMX11BIT;
break;
default:
PIOS_Assert(0);
break;
}
// Force binding to zero on the main port
hw_DSMxBind = 0;
//TODO: Define the various Channelgroup for Revo dsm inputs and handle here
PIOS_Board_configure_dsm(&pios_usart_dsm_hsum_main_cfg, &pios_dsm_main_cfg,
&pios_usart_com_driver, &proto, MANUALCONTROLSETTINGS_CHANNELGROUPS_DSMMAINPORT,&hw_DSMxBind);
}
#endif /* PIOS_INCLUDE_DSM */
break;
case HWREVOMINI_MAINPORT_HOTTSUMD:
case HWREVOMINI_MAINPORT_HOTTSUMH:
#if defined(PIOS_INCLUDE_HSUM)
{
enum pios_hsum_proto proto;
switch (hw_mainport) {
case HWREVOMINI_MAINPORT_HOTTSUMD:
proto = PIOS_HSUM_PROTO_SUMD;
break;
case HWREVOMINI_MAINPORT_HOTTSUMH:
proto = PIOS_HSUM_PROTO_SUMH;
break;
default:
PIOS_Assert(0);
break;
}
PIOS_Board_configure_hsum(&pios_usart_dsm_hsum_main_cfg, &pios_usart_com_driver, &proto, MANUALCONTROLSETTINGS_CHANNELGROUPS_HOTTSUM);
}
#endif /* PIOS_INCLUDE_HSUM */
break;
case HWREVOMINI_MAINPORT_DEBUGCONSOLE:
#if defined(PIOS_INCLUDE_DEBUG_CONSOLE)
{
PIOS_Board_configure_com(&pios_usart_main_cfg, 0, PIOS_COM_DEBUGCONSOLE_TX_BUF_LEN, &pios_usart_com_driver, &pios_com_debug_id);
}
#endif /* PIOS_INCLUDE_DEBUG_CONSOLE */
break;
case HWREVOMINI_MAINPORT_COMBRIDGE:
PIOS_Board_configure_com(&pios_usart_main_cfg, PIOS_COM_BRIDGE_RX_BUF_LEN, PIOS_COM_BRIDGE_TX_BUF_LEN, &pios_usart_com_driver, &pios_com_bridge_id);
break;
case HWREVOMINI_MAINPORT_MAVLINKTX:
#if defined(PIOS_INCLUDE_MAVLINK)
PIOS_Board_configure_com(&pios_usart_main_cfg, 0, PIOS_COM_MAVLINK_TX_BUF_LEN, &pios_usart_com_driver, &pios_com_mavlink_id);
#endif /* PIOS_INCLUDE_MAVLINK */
break;
case HWREVOMINI_MAINPORT_MAVLINKTX_GPS_RX:
#if defined(PIOS_INCLUDE_MAVLINK)
PIOS_Board_configure_com(&pios_usart_main_cfg, PIOS_COM_GPS_RX_BUF_LEN, PIOS_COM_MAVLINK_TX_BUF_LEN, &pios_usart_com_driver, &pios_com_gps_id);
pios_com_mavlink_id = pios_com_gps_id;
#endif /* PIOS_INCLUDE_MAVLINK */
break;
case HWREVOMINI_MAINPORT_HOTTTELEMETRY:
#if defined(PIOS_INCLUDE_HOTT) && defined(PIOS_INCLUDE_USART) && defined(PIOS_INCLUDE_COM)
PIOS_Board_configure_com(&pios_usart_main_cfg, PIOS_COM_HOTT_RX_BUF_LEN, PIOS_COM_HOTT_TX_BUF_LEN, &pios_usart_com_driver, &pios_com_hott_id);
#endif /* PIOS_INCLUDE_HOTT */
break;
case HWREVOMINI_MAINPORT_FRSKYSENSORHUB:
#if defined(PIOS_INCLUDE_FRSKY_SENSOR_HUB) && defined(PIOS_INCLUDE_USART) && defined(PIOS_INCLUDE_COM)
PIOS_Board_configure_com(&pios_usart_main_cfg, 0, PIOS_COM_FRSKYSENSORHUB_TX_BUF_LEN, &pios_usart_com_driver, &pios_com_frsky_sensor_hub_id);
#endif /* PIOS_INCLUDE_FRSKY_SENSOR_HUB */
break;
case HWREVOMINI_MAINPORT_LIGHTTELEMETRYTX:
#if defined(PIOS_INCLUDE_LIGHTTELEMETRY)
PIOS_Board_configure_com(&pios_usart_main_cfg, 0, PIOS_COM_LIGHTTELEMETRY_TX_BUF_LEN, &pios_usart_com_driver, &pios_com_lighttelemetry_id);
#endif
break;
case HWREVOMINI_MAINPORT_PICOC:
#if defined(PIOS_INCLUDE_PICOC) && defined(PIOS_INCLUDE_USART) && defined(PIOS_INCLUDE_COM)
PIOS_Board_configure_com(&pios_usart_main_cfg, PIOS_COM_PICOC_RX_BUF_LEN, PIOS_COM_PICOC_TX_BUF_LEN, &pios_usart_com_driver, &pios_com_picoc_id);
#endif /* PIOS_INCLUDE_PICOC */
break;
case HWREVOMINI_MAINPORT_FRSKYSPORTTELEMETRY:
#if defined(PIOS_INCLUDE_FRSKY_SPORT_TELEMETRY) && defined(PIOS_INCLUDE_USART) && defined(PIOS_INCLUDE_COM)
PIOS_Board_configure_com(&pios_usart_main_cfg, PIOS_COM_FRSKYSPORT_RX_BUF_LEN, PIOS_COM_FRSKYSPORT_TX_BUF_LEN, &pios_usart_com_driver, &pios_com_frsky_sport_id);
#endif /* PIOS_INCLUDE_FRSKY_SPORT_TELEMETRY */
break;
} /* hw_mainport */
if (hw_mainport != HWREVOMINI_MAINPORT_SBUS) {
GPIO_Init(pios_sbus_cfg.inv.gpio, (GPIO_InitTypeDef*)&pios_sbus_cfg.inv.init);
GPIO_WriteBit(pios_sbus_cfg.inv.gpio, pios_sbus_cfg.inv.init.GPIO_Pin, pios_sbus_cfg.gpio_inv_disable);
}
/* Configure FlexiPort */
uint8_t hw_flexiport;
HwRevoMiniFlexiPortGet(&hw_flexiport);
switch (hw_flexiport) {
case HWREVOMINI_FLEXIPORT_DISABLED:
break;
case HWREVOMINI_FLEXIPORT_TELEMETRY:
PIOS_Board_configure_com(&pios_usart_flexi_cfg, PIOS_COM_TELEM_RF_RX_BUF_LEN, PIOS_COM_TELEM_RF_TX_BUF_LEN, &pios_usart_com_driver, &pios_com_telem_rf_id);
break;
case HWREVOMINI_FLEXIPORT_I2C:
#if defined(PIOS_INCLUDE_I2C)
{
if (PIOS_I2C_Init(&pios_i2c_flexiport_adapter_id, &pios_i2c_flexiport_adapter_cfg)) {
PIOS_Assert(0);
}
}
#endif /* PIOS_INCLUDE_I2C */
break;
case HWREVOMINI_FLEXIPORT_GPS:
PIOS_Board_configure_com(&pios_usart_flexi_cfg, PIOS_COM_GPS_RX_BUF_LEN, PIOS_COM_GPS_TX_BUF_LEN, &pios_usart_com_driver, &pios_com_gps_id);
break;
case HWREVOMINI_FLEXIPORT_DSM2:
case HWREVOMINI_FLEXIPORT_DSMX10BIT:
case HWREVOMINI_FLEXIPORT_DSMX11BIT:
#if defined(PIOS_INCLUDE_DSM)
{
enum pios_dsm_proto proto;
switch (hw_flexiport) {
case HWREVOMINI_FLEXIPORT_DSM2:
proto = PIOS_DSM_PROTO_DSM2;
break;
case HWREVOMINI_FLEXIPORT_DSMX10BIT:
proto = PIOS_DSM_PROTO_DSMX10BIT;
break;
case HWREVOMINI_FLEXIPORT_DSMX11BIT:
proto = PIOS_DSM_PROTO_DSMX11BIT;
break;
default:
PIOS_Assert(0);
break;
}
//TODO: Define the various Channelgroup for Revo dsm inputs and handle here
PIOS_Board_configure_dsm(&pios_usart_dsm_hsum_flexi_cfg, &pios_dsm_flexi_cfg,
&pios_usart_com_driver, &proto, MANUALCONTROLSETTINGS_CHANNELGROUPS_DSMFLEXIPORT,&hw_DSMxBind);
}
break;
#endif /* PIOS_INCLUDE_DSM */
break;
case HWREVOMINI_FLEXIPORT_HOTTSUMD:
case HWREVOMINI_FLEXIPORT_HOTTSUMH:
#if defined(PIOS_INCLUDE_HSUM)
{
enum pios_hsum_proto proto;
switch (hw_flexiport) {
case HWREVOMINI_FLEXIPORT_HOTTSUMD:
proto = PIOS_HSUM_PROTO_SUMD;
break;
case HWREVOMINI_FLEXIPORT_HOTTSUMH:
proto = PIOS_HSUM_PROTO_SUMH;
break;
default:
PIOS_Assert(0);
break;
}
PIOS_Board_configure_hsum(&pios_usart_dsm_hsum_flexi_cfg, &pios_usart_com_driver, &proto, MANUALCONTROLSETTINGS_CHANNELGROUPS_HOTTSUM);
}
#endif /* PIOS_INCLUDE_HSUM */
break;
case HWREVOMINI_FLEXIPORT_DEBUGCONSOLE:
#if defined(PIOS_INCLUDE_DEBUG_CONSOLE)
{
PIOS_Board_configure_com(&pios_usart_main_cfg, 0, PIOS_COM_DEBUGCONSOLE_TX_BUF_LEN, &pios_usart_com_driver, &pios_com_debug_id);
}
#endif /* PIOS_INCLUDE_DEBUG_CONSOLE */
break;
case HWREVOMINI_FLEXIPORT_COMBRIDGE:
PIOS_Board_configure_com(&pios_usart_flexi_cfg, PIOS_COM_BRIDGE_RX_BUF_LEN, PIOS_COM_BRIDGE_TX_BUF_LEN, &pios_usart_com_driver, &pios_com_bridge_id);
break;
case HWREVOMINI_FLEXIPORT_MAVLINKTX:
#if defined(PIOS_INCLUDE_MAVLINK)
PIOS_Board_configure_com(&pios_usart_flexi_cfg, 0, PIOS_COM_MAVLINK_TX_BUF_LEN, &pios_usart_com_driver, &pios_com_mavlink_id);
#endif /* PIOS_INCLUDE_MAVLINK */
break;
case HWREVOMINI_FLEXIPORT_MAVLINKTX_GPS_RX:
#if defined(PIOS_INCLUDE_MAVLINK)
PIOS_Board_configure_com(&pios_usart_flexi_cfg, PIOS_COM_GPS_RX_BUF_LEN, PIOS_COM_MAVLINK_TX_BUF_LEN, &pios_usart_com_driver, &pios_com_gps_id);
pios_com_mavlink_id = pios_com_gps_id;
#endif /* PIOS_INCLUDE_MAVLINK */
break;
case HWREVOMINI_FLEXIPORT_HOTTTELEMETRY:
#if defined(PIOS_INCLUDE_HOTT) && defined(PIOS_INCLUDE_USART) && defined(PIOS_INCLUDE_COM)
PIOS_Board_configure_com(&pios_usart_flexi_cfg, PIOS_COM_HOTT_RX_BUF_LEN, PIOS_COM_HOTT_TX_BUF_LEN, &pios_usart_com_driver, &pios_com_hott_id);
#endif /* PIOS_INCLUDE_HOTT */
break;
case HWREVOMINI_FLEXIPORT_FRSKYSENSORHUB:
#if defined(PIOS_INCLUDE_FRSKY_SENSOR_HUB) && defined(PIOS_INCLUDE_USART) && defined(PIOS_INCLUDE_COM)
PIOS_Board_configure_com(&pios_usart_flexi_cfg, 0, PIOS_COM_FRSKYSENSORHUB_TX_BUF_LEN, &pios_usart_com_driver, &pios_com_frsky_sensor_hub_id);
#endif /* PIOS_INCLUDE_FRSKY_SENSOR_HUB */
break;
case HWREVOMINI_FLEXIPORT_LIGHTTELEMETRYTX:
#if defined(PIOS_INCLUDE_LIGHTTELEMETRY)
PIOS_Board_configure_com(&pios_usart_flexi_cfg, 0, PIOS_COM_LIGHTTELEMETRY_TX_BUF_LEN, &pios_usart_com_driver, &pios_com_lighttelemetry_id);
#endif
case HWREVOMINI_FLEXIPORT_PICOC:
#if defined(PIOS_INCLUDE_PICOC) && defined(PIOS_INCLUDE_USART) && defined(PIOS_INCLUDE_COM)
PIOS_Board_configure_com(&pios_usart_flexi_cfg, PIOS_COM_PICOC_RX_BUF_LEN, PIOS_COM_PICOC_TX_BUF_LEN, &pios_usart_com_driver, &pios_com_picoc_id);
#endif /* PIOS_INCLUDE_PICOC */
break;
case HWREVOMINI_FLEXIPORT_FRSKYSPORTTELEMETRY:
#if defined(PIOS_INCLUDE_FRSKY_SPORT_TELEMETRY) && defined(PIOS_INCLUDE_USART) && defined(PIOS_INCLUDE_COM)
PIOS_Board_configure_com(&pios_usart_flexi_cfg, PIOS_COM_FRSKYSPORT_RX_BUF_LEN, PIOS_COM_FRSKYSPORT_TX_BUF_LEN, &pios_usart_com_driver, &pios_com_frsky_sport_id);
#endif /* PIOS_INCLUDE_FRSKY_SPORT_TELEMETRY */
break;
} /* hwsettings_rv_flexiport */
/* Initalize the RFM22B radio COM device. */
#if defined(PIOS_INCLUDE_RFM22B)
uint8_t hwsettings_radioport;
HwRevoMiniRadioPortGet(&hwsettings_radioport);
switch (hwsettings_radioport) {
case HWREVOMINI_RADIOPORT_DISABLED:
break;
case HWREVOMINI_RADIOPORT_TELEMETRY:
{
extern const struct pios_rfm22b_cfg * PIOS_BOARD_HW_DEFS_GetRfm22Cfg (uint32_t board_revision);
const struct pios_board_info * bdinfo = &pios_board_info_blob;
const struct pios_rfm22b_cfg *pios_rfm22b_cfg = PIOS_BOARD_HW_DEFS_GetRfm22Cfg(bdinfo->board_rev);
if (PIOS_RFM22B_Init(&pios_rfm22b_id, PIOS_RFM22_SPI_PORT, pios_rfm22b_cfg->slave_num, pios_rfm22b_cfg)) {
PIOS_Assert(0);
}
uint8_t *rx_buffer = (uint8_t *) PIOS_malloc(PIOS_COM_RFM22B_RF_RX_BUF_LEN);
uint8_t *tx_buffer = (uint8_t *) PIOS_malloc(PIOS_COM_RFM22B_RF_TX_BUF_LEN);
PIOS_Assert(rx_buffer);
PIOS_Assert(tx_buffer);
if (PIOS_COM_Init(&pios_com_telem_rf_id, &pios_rfm22b_com_driver, pios_rfm22b_id,
rx_buffer, PIOS_COM_RFM22B_RF_RX_BUF_LEN,
tx_buffer, PIOS_COM_RFM22B_RF_TX_BUF_LEN)) {
PIOS_Assert(0);
}
break;
}
}
#endif /* PIOS_INCLUDE_RFM22B */
/* Configure the receiver port*/
uint8_t hw_rcvrport;
HwRevoMiniRcvrPortGet(&hw_rcvrport);
//
switch (hw_rcvrport){
case HWREVOMINI_RCVRPORT_DISABLED:
break;
case HWREVOMINI_RCVRPORT_PWM:
#if defined(PIOS_INCLUDE_PWM)
{
/* Set up the receiver port. Later this should be optional */
uintptr_t pios_pwm_id;
PIOS_PWM_Init(&pios_pwm_id, &pios_pwm_cfg);
uintptr_t pios_pwm_rcvr_id;
if (PIOS_RCVR_Init(&pios_pwm_rcvr_id, &pios_pwm_rcvr_driver, pios_pwm_id)) {
PIOS_Assert(0);
}
pios_rcvr_group_map[MANUALCONTROLSETTINGS_CHANNELGROUPS_PWM] = pios_pwm_rcvr_id;
}
#endif /* PIOS_INCLUDE_PWM */
break;
case HWREVOMINI_RCVRPORT_PPMPWM:
/* This is a combination of PPM and PWM inputs */
#if defined(PIOS_INCLUDE_PPM)
{
uintptr_t pios_ppm_id;
PIOS_PPM_Init(&pios_ppm_id, &pios_ppm_cfg);
uintptr_t pios_ppm_rcvr_id;
if (PIOS_RCVR_Init(&pios_ppm_rcvr_id, &pios_ppm_rcvr_driver, pios_ppm_id)) {
PIOS_Assert(0);
}
pios_rcvr_group_map[MANUALCONTROLSETTINGS_CHANNELGROUPS_PPM] = pios_ppm_rcvr_id;
}
#endif /* PIOS_INCLUDE_PPM */
#if defined(PIOS_INCLUDE_PWM)
{
uintptr_t pios_pwm_id;
PIOS_PWM_Init(&pios_pwm_id, &pios_pwm_with_ppm_cfg);
uintptr_t pios_pwm_rcvr_id;
if (PIOS_RCVR_Init(&pios_pwm_rcvr_id, &pios_pwm_rcvr_driver, pios_pwm_id)) {
PIOS_Assert(0);
}
pios_rcvr_group_map[MANUALCONTROLSETTINGS_CHANNELGROUPS_PWM] = pios_pwm_rcvr_id;
}
#endif /* PIOS_INCLUDE_PWM */
break;
case HWREVOMINI_RCVRPORT_PPM:
case HWREVOMINI_RCVRPORT_PPMOUTPUTS:
#if defined(PIOS_INCLUDE_PPM)
{
uintptr_t pios_ppm_id;
PIOS_PPM_Init(&pios_ppm_id, &pios_ppm_cfg);
uintptr_t pios_ppm_rcvr_id;
if (PIOS_RCVR_Init(&pios_ppm_rcvr_id, &pios_ppm_rcvr_driver, pios_ppm_id)) {
PIOS_Assert(0);
}
pios_rcvr_group_map[MANUALCONTROLSETTINGS_CHANNELGROUPS_PPM] = pios_ppm_rcvr_id;
}
#endif /* PIOS_INCLUDE_PPM */
case HWREVOMINI_RCVRPORT_OUTPUTS:
break;
}
#if defined(PIOS_INCLUDE_GCSRCVR)
GCSReceiverInitialize();
uintptr_t pios_gcsrcvr_id;
PIOS_GCSRCVR_Init(&pios_gcsrcvr_id);
uintptr_t pios_gcsrcvr_rcvr_id;
if (PIOS_RCVR_Init(&pios_gcsrcvr_rcvr_id, &pios_gcsrcvr_rcvr_driver, pios_gcsrcvr_id)) {
PIOS_Assert(0);
}
pios_rcvr_group_map[MANUALCONTROLSETTINGS_CHANNELGROUPS_GCS] = pios_gcsrcvr_rcvr_id;
#endif /* PIOS_INCLUDE_GCSRCVR */
#ifndef PIOS_DEBUG_ENABLE_DEBUG_PINS
switch (hw_rcvrport) {
case HWREVOMINI_RCVRPORT_DISABLED:
case HWREVOMINI_RCVRPORT_PWM:
case HWREVOMINI_RCVRPORT_PPM:
/* Set up the servo outputs */
PIOS_Servo_Init(&pios_servo_cfg);
break;
case HWREVOMINI_RCVRPORT_PPMOUTPUTS:
case HWREVOMINI_RCVRPORT_OUTPUTS:
//PIOS_Servo_Init(&pios_servo_rcvr_cfg);
//TODO: Prepare the configurations on board_hw_defs and handle here:
PIOS_Servo_Init(&pios_servo_cfg);
break;
}
#else
PIOS_DEBUG_Init(&pios_tim_servo_all_channels, NELEMENTS(pios_tim_servo_all_channels));
#endif
if (PIOS_I2C_Init(&pios_i2c_mag_pressure_adapter_id, &pios_i2c_mag_pressure_adapter_cfg)) {
PIOS_DEBUG_Assert(0);
}
PIOS_DELAY_WaitmS(50);
PIOS_SENSORS_Init();
#if defined(PIOS_INCLUDE_ADC)
uint32_t internal_adc_id;
PIOS_INTERNAL_ADC_Init(&internal_adc_id, &pios_adc_cfg);
PIOS_ADC_Init(&pios_internal_adc_id, &pios_internal_adc_driver, internal_adc_id);
// configure the pullup for PA8 (inhibit pullups from current/sonar shared pin)
GPIO_Init(pios_current_sonar_pin.gpio, &pios_current_sonar_pin.init);
#endif
#if defined(PIOS_INCLUDE_HMC5883)
PIOS_HMC5883_Init(PIOS_I2C_MAIN_ADAPTER, &pios_hmc5883_cfg);
#endif
#if defined(PIOS_INCLUDE_MS5611)
PIOS_MS5611_Init(&pios_ms5611_cfg, pios_i2c_mag_pressure_adapter_id);
#endif
#if defined(PIOS_INCLUDE_MPU6000)
PIOS_MPU6000_Init(pios_spi_gyro_id,0, &pios_mpu6000_cfg);
// To be safe map from UAVO enum to driver enum
uint8_t hw_gyro_range;
HwRevoMiniGyroRangeGet(&hw_gyro_range);
switch(hw_gyro_range) {
case HWREVOMINI_GYRORANGE_250:
PIOS_MPU6000_SetGyroRange(PIOS_MPU60X0_SCALE_250_DEG);
break;
case HWREVOMINI_GYRORANGE_500:
PIOS_MPU6000_SetGyroRange(PIOS_MPU60X0_SCALE_500_DEG);
break;
case HWREVOMINI_GYRORANGE_1000:
PIOS_MPU6000_SetGyroRange(PIOS_MPU60X0_SCALE_1000_DEG);
break;
case HWREVOMINI_GYRORANGE_2000:
PIOS_MPU6000_SetGyroRange(PIOS_MPU60X0_SCALE_2000_DEG);
break;
}
uint8_t hw_accel_range;
HwRevoMiniAccelRangeGet(&hw_accel_range);
switch(hw_accel_range) {
case HWREVOMINI_ACCELRANGE_2G:
PIOS_MPU6000_SetAccelRange(PIOS_MPU60X0_ACCEL_2G);
break;
case HWREVOMINI_ACCELRANGE_4G:
PIOS_MPU6000_SetAccelRange(PIOS_MPU60X0_ACCEL_4G);
break;
case HWREVOMINI_ACCELRANGE_8G:
PIOS_MPU6000_SetAccelRange(PIOS_MPU60X0_ACCEL_8G);
break;
case HWREVOMINI_ACCELRANGE_16G:
PIOS_MPU6000_SetAccelRange(PIOS_MPU60X0_ACCEL_16G);
break;
}
// the filter has to be set before rate else divisor calculation will fail
uint8_t hw_mpu6000_dlpf;
HwRevoMiniMPU6000DLPFGet(&hw_mpu6000_dlpf);
enum pios_mpu60x0_filter mpu6000_dlpf = \
(hw_mpu6000_dlpf == HWREVOMINI_MPU6000DLPF_256) ? PIOS_MPU60X0_LOWPASS_256_HZ : \
(hw_mpu6000_dlpf == HWREVOMINI_MPU6000DLPF_188) ? PIOS_MPU60X0_LOWPASS_188_HZ : \
(hw_mpu6000_dlpf == HWREVOMINI_MPU6000DLPF_98) ? PIOS_MPU60X0_LOWPASS_98_HZ : \
(hw_mpu6000_dlpf == HWREVOMINI_MPU6000DLPF_42) ? PIOS_MPU60X0_LOWPASS_42_HZ : \
(hw_mpu6000_dlpf == HWREVOMINI_MPU6000DLPF_20) ? PIOS_MPU60X0_LOWPASS_20_HZ : \
(hw_mpu6000_dlpf == HWREVOMINI_MPU6000DLPF_10) ? PIOS_MPU60X0_LOWPASS_10_HZ : \
(hw_mpu6000_dlpf == HWREVOMINI_MPU6000DLPF_5) ? PIOS_MPU60X0_LOWPASS_5_HZ : \
pios_mpu6000_cfg.default_filter;
PIOS_MPU6000_SetLPF(mpu6000_dlpf);
uint8_t hw_mpu6000_samplerate;
HwRevoMiniMPU6000RateGet(&hw_mpu6000_samplerate);
uint16_t mpu6000_samplerate = \
(hw_mpu6000_samplerate == HWREVOMINI_MPU6000RATE_200) ? 200 : \
(hw_mpu6000_samplerate == HWREVOMINI_MPU6000RATE_333) ? 333 : \
(hw_mpu6000_samplerate == HWREVOMINI_MPU6000RATE_500) ? 500 : \
(hw_mpu6000_samplerate == HWREVOMINI_MPU6000RATE_666) ? 666 : \
(hw_mpu6000_samplerate == HWREVOMINI_MPU6000RATE_1000) ? 1000 : \
(hw_mpu6000_samplerate == HWREVOMINI_MPU6000RATE_2000) ? 2000 : \
(hw_mpu6000_samplerate == HWREVOMINI_MPU6000RATE_4000) ? 4000 : \
(hw_mpu6000_samplerate == HWREVOMINI_MPU6000RATE_8000) ? 8000 : \
pios_mpu6000_cfg.default_samplerate;
PIOS_MPU6000_SetSampleRate(mpu6000_samplerate);
#endif
}
void PIOS_Board_Init(void)
{
const struct pios_board_info *bdinfo = &pios_board_info_blob;
#if defined(PIOS_INCLUDE_LED)
const struct pios_gpio_cfg *led_cfg = PIOS_BOARD_HW_DEFS_GetLedCfg(bdinfo->board_rev);
PIOS_Assert(led_cfg);
PIOS_LED_Init(led_cfg);
#endif /* PIOS_INCLUDE_LED */
#ifdef PIOS_INCLUDE_INSTRUMENTATION
PIOS_Instrumentation_Init(PIOS_INSTRUMENTATION_MAX_COUNTERS);
#endif
/* Set up the SPI interface to the gyro/acelerometer */
if (PIOS_SPI_Init(&pios_spi_gyro_id, &pios_spi_gyro_cfg)) {
PIOS_DEBUG_Assert(0);
}
/* Set up the SPI interface to the flash and rfm22b */
if (PIOS_SPI_Init(&pios_spi_telem_flash_id, &pios_spi_telem_flash_cfg)) {
PIOS_DEBUG_Assert(0);
}
#if defined(PIOS_INCLUDE_FLASH)
/* Connect flash to the appropriate interface and configure it */
uintptr_t flash_id;
// Initialize the external USER flash
if (PIOS_Flash_Jedec_Init(&flash_id, pios_spi_telem_flash_id, 1)) {
PIOS_DEBUG_Assert(0);
}
if (PIOS_FLASHFS_Logfs_Init(&pios_uavo_settings_fs_id, &flashfs_external_system_cfg, &pios_jedec_flash_driver, flash_id)) {
PIOS_DEBUG_Assert(0);
}
#endif /* if defined(PIOS_INCLUDE_FLASH) */
#if defined(PIOS_INCLUDE_RTC)
PIOS_RTC_Init(&pios_rtc_main_cfg);
#endif
/* IAP System Setup */
PIOS_IAP_Init();
// check for safe mode commands from gcs
if (PIOS_IAP_ReadBootCmd(0) == PIOS_IAP_CLEAR_FLASH_CMD_0 &&
PIOS_IAP_ReadBootCmd(1) == PIOS_IAP_CLEAR_FLASH_CMD_1 &&
PIOS_IAP_ReadBootCmd(2) == PIOS_IAP_CLEAR_FLASH_CMD_2) {
PIOS_FLASHFS_Format(pios_uavo_settings_fs_id);
PIOS_IAP_WriteBootCmd(0, 0);
PIOS_IAP_WriteBootCmd(1, 0);
PIOS_IAP_WriteBootCmd(2, 0);
}
#ifdef PIOS_INCLUDE_WDG
PIOS_WDG_Init();
#endif
/* Initialize the task monitor */
if (PIOS_TASK_MONITOR_Initialize(TASKINFO_RUNNING_NUMELEM)) {
PIOS_Assert(0);
}
/* Initialize the delayed callback library */
PIOS_CALLBACKSCHEDULER_Initialize();
/* Initialize UAVObject libraries */
EventDispatcherInitialize();
UAVObjInitialize();
HwSettingsInitialize();
#if defined(PIOS_INCLUDE_RFM22B)
OPLinkSettingsInitialize();
OPLinkStatusInitialize();
#endif /* PIOS_INCLUDE_RFM22B */
/* Initialize the alarms library */
AlarmsInitialize();
/* Set up pulse timers */
PIOS_TIM_InitClock(&tim_1_cfg);
PIOS_TIM_InitClock(&tim_3_cfg);
PIOS_TIM_InitClock(&tim_4_cfg);
PIOS_TIM_InitClock(&tim_5_cfg);
PIOS_TIM_InitClock(&tim_8_cfg);
PIOS_TIM_InitClock(&tim_9_cfg);
PIOS_TIM_InitClock(&tim_10_cfg);
PIOS_TIM_InitClock(&tim_11_cfg);
PIOS_TIM_InitClock(&tim_12_cfg);
uint16_t boot_count = PIOS_IAP_ReadBootCount();
if (boot_count < 3) {
PIOS_IAP_WriteBootCount(++boot_count);
AlarmsClear(SYSTEMALARMS_ALARM_BOOTFAULT);
} else {
/* Too many failed boot attempts, force hwsettings to defaults */
HwSettingsSetDefaults(HwSettingsHandle(), 0);
AlarmsSet(SYSTEMALARMS_ALARM_BOOTFAULT, SYSTEMALARMS_ALARM_CRITICAL);
}
/* Configure IO ports */
uint8_t hwsettings_DSMxBind;
HwSettingsDSMxBindGet(&hwsettings_DSMxBind);
/* Configure FlexiPort */
uint8_t hwsettings_flexiport;
HwSettingsRM_FlexiPortGet(&hwsettings_flexiport);
switch (hwsettings_flexiport) {
case HWSETTINGS_RM_FLEXIPORT_DISABLED:
break;
case HWSETTINGS_RM_FLEXIPORT_TELEMETRY:
PIOS_Board_configure_com(&pios_usart_flexi_cfg, PIOS_COM_TELEM_RF_RX_BUF_LEN, PIOS_COM_TELEM_RF_TX_BUF_LEN, &pios_usart_com_driver, &pios_com_telem_rf_id);
break;
case HWSETTINGS_RM_FLEXIPORT_I2C:
#if defined(PIOS_INCLUDE_I2C)
{
if (PIOS_I2C_Init(&pios_i2c_flexiport_adapter_id, &pios_i2c_flexiport_adapter_cfg)) {
PIOS_Assert(0);
}
}
#endif /* PIOS_INCLUDE_I2C */
break;
case HWSETTINGS_RM_FLEXIPORT_GPS:
PIOS_Board_configure_com(&pios_usart_flexi_cfg, PIOS_COM_GPS_RX_BUF_LEN, PIOS_COM_GPS_TX_BUF_LEN, &pios_usart_com_driver, &pios_com_gps_id);
break;
case HWSETTINGS_RM_FLEXIPORT_DSM:
// TODO: Define the various Channelgroup for Revo dsm inputs and handle here
PIOS_Board_configure_dsm(&pios_usart_dsm_flexi_cfg, &pios_dsm_flexi_cfg,
&pios_usart_com_driver, MANUALCONTROLSETTINGS_CHANNELGROUPS_DSMFLEXIPORT, &hwsettings_DSMxBind);
break;
case HWSETTINGS_RM_FLEXIPORT_DEBUGCONSOLE:
#if defined(PIOS_INCLUDE_DEBUG_CONSOLE)
{
PIOS_Board_configure_com(&pios_usart_main_cfg, 0, PIOS_COM_DEBUGCONSOLE_TX_BUF_LEN, &pios_usart_com_driver, &pios_com_debug_id);
}
#endif /* PIOS_INCLUDE_DEBUG_CONSOLE */
break;
case HWSETTINGS_RM_FLEXIPORT_COMBRIDGE:
PIOS_Board_configure_com(&pios_usart_flexi_cfg, PIOS_COM_BRIDGE_RX_BUF_LEN, PIOS_COM_BRIDGE_TX_BUF_LEN, &pios_usart_com_driver, &pios_com_bridge_id);
break;
case HWSETTINGS_RM_FLEXIPORT_OSDHK:
PIOS_Board_configure_com(&pios_usart_hkosd_flexi_cfg, PIOS_COM_HKOSD_RX_BUF_LEN, PIOS_COM_HKOSD_TX_BUF_LEN, &pios_usart_com_driver, &pios_com_hkosd_id);
break;
} /* hwsettings_rm_flexiport */
/* Moved this here to allow binding on flexiport */
#if defined(PIOS_INCLUDE_FLASH)
if (PIOS_FLASHFS_Logfs_Init(&pios_user_fs_id, &flashfs_external_user_cfg, &pios_jedec_flash_driver, flash_id)) {
PIOS_DEBUG_Assert(0);
}
#endif /* if defined(PIOS_INCLUDE_FLASH) */
#if defined(PIOS_INCLUDE_USB)
/* Initialize board specific USB data */
PIOS_USB_BOARD_DATA_Init();
/* Flags to determine if various USB interfaces are advertised */
bool usb_hid_present = false;
bool usb_cdc_present = false;
#if defined(PIOS_INCLUDE_USB_CDC)
if (PIOS_USB_DESC_HID_CDC_Init()) {
PIOS_Assert(0);
}
usb_hid_present = true;
usb_cdc_present = true;
#else
if (PIOS_USB_DESC_HID_ONLY_Init()) {
PIOS_Assert(0);
}
usb_hid_present = true;
#endif
uint32_t pios_usb_id;
PIOS_USB_Init(&pios_usb_id, PIOS_BOARD_HW_DEFS_GetUsbCfg(bdinfo->board_rev));
#if defined(PIOS_INCLUDE_USB_CDC)
uint8_t hwsettings_usb_vcpport;
/* Configure the USB VCP port */
HwSettingsUSB_VCPPortGet(&hwsettings_usb_vcpport);
if (!usb_cdc_present) {
/* Force VCP port function to disabled if we haven't advertised VCP in our USB descriptor */
hwsettings_usb_vcpport = HWSETTINGS_USB_VCPPORT_DISABLED;
}
uint32_t pios_usb_cdc_id;
if (PIOS_USB_CDC_Init(&pios_usb_cdc_id, &pios_usb_cdc_cfg, pios_usb_id)) {
PIOS_Assert(0);
}
uint32_t pios_usb_hid_id;
if (PIOS_USB_HID_Init(&pios_usb_hid_id, &pios_usb_hid_cfg, pios_usb_id)) {
PIOS_Assert(0);
}
switch (hwsettings_usb_vcpport) {
case HWSETTINGS_USB_VCPPORT_DISABLED:
break;
case HWSETTINGS_USB_VCPPORT_USBTELEMETRY:
#if defined(PIOS_INCLUDE_COM)
{
uint8_t *rx_buffer = (uint8_t *)pios_malloc(PIOS_COM_TELEM_USB_RX_BUF_LEN);
uint8_t *tx_buffer = (uint8_t *)pios_malloc(PIOS_COM_TELEM_USB_TX_BUF_LEN);
PIOS_Assert(rx_buffer);
PIOS_Assert(tx_buffer);
if (PIOS_COM_Init(&pios_com_telem_usb_id, &pios_usb_cdc_com_driver, pios_usb_cdc_id,
rx_buffer, PIOS_COM_TELEM_USB_RX_BUF_LEN,
tx_buffer, PIOS_COM_TELEM_USB_TX_BUF_LEN)) {
PIOS_Assert(0);
}
}
#endif /* PIOS_INCLUDE_COM */
break;
case HWSETTINGS_USB_VCPPORT_COMBRIDGE:
#if defined(PIOS_INCLUDE_COM)
{
uint8_t *rx_buffer = (uint8_t *)pios_malloc(PIOS_COM_BRIDGE_RX_BUF_LEN);
uint8_t *tx_buffer = (uint8_t *)pios_malloc(PIOS_COM_BRIDGE_TX_BUF_LEN);
PIOS_Assert(rx_buffer);
PIOS_Assert(tx_buffer);
if (PIOS_COM_Init(&pios_com_vcp_id, &pios_usb_cdc_com_driver, pios_usb_cdc_id,
rx_buffer, PIOS_COM_BRIDGE_RX_BUF_LEN,
tx_buffer, PIOS_COM_BRIDGE_TX_BUF_LEN)) {
PIOS_Assert(0);
}
}
#endif /* PIOS_INCLUDE_COM */
break;
case HWSETTINGS_USB_VCPPORT_DEBUGCONSOLE:
#if defined(PIOS_INCLUDE_COM)
#if defined(PIOS_INCLUDE_DEBUG_CONSOLE)
{
uint8_t *tx_buffer = (uint8_t *)pios_malloc(PIOS_COM_DEBUGCONSOLE_TX_BUF_LEN);
PIOS_Assert(tx_buffer);
if (PIOS_COM_Init(&pios_com_debug_id, &pios_usb_cdc_com_driver, pios_usb_cdc_id,
NULL, 0,
tx_buffer, PIOS_COM_DEBUGCONSOLE_TX_BUF_LEN)) {
PIOS_Assert(0);
}
}
#endif /* PIOS_INCLUDE_DEBUG_CONSOLE */
#endif /* PIOS_INCLUDE_COM */
break;
}
#endif /* PIOS_INCLUDE_USB_CDC */
#if defined(PIOS_INCLUDE_USB_HID)
/* Configure the usb HID port */
uint8_t hwsettings_usb_hidport;
HwSettingsUSB_HIDPortGet(&hwsettings_usb_hidport);
if (!usb_hid_present) {
/* Force HID port function to disabled if we haven't advertised HID in our USB descriptor */
hwsettings_usb_hidport = HWSETTINGS_USB_HIDPORT_DISABLED;
}
switch (hwsettings_usb_hidport) {
case HWSETTINGS_USB_HIDPORT_DISABLED:
break;
case HWSETTINGS_USB_HIDPORT_USBTELEMETRY:
#if defined(PIOS_INCLUDE_COM)
{
uint8_t *rx_buffer = (uint8_t *)pios_malloc(PIOS_COM_TELEM_USB_RX_BUF_LEN);
uint8_t *tx_buffer = (uint8_t *)pios_malloc(PIOS_COM_TELEM_USB_TX_BUF_LEN);
PIOS_Assert(rx_buffer);
PIOS_Assert(tx_buffer);
if (PIOS_COM_Init(&pios_com_telem_usb_id, &pios_usb_hid_com_driver, pios_usb_hid_id,
rx_buffer, PIOS_COM_TELEM_USB_RX_BUF_LEN,
tx_buffer, PIOS_COM_TELEM_USB_TX_BUF_LEN)) {
PIOS_Assert(0);
}
}
#endif /* PIOS_INCLUDE_COM */
break;
}
#endif /* PIOS_INCLUDE_USB_HID */
if (usb_hid_present || usb_cdc_present) {
PIOS_USBHOOK_Activate();
}
#endif /* PIOS_INCLUDE_USB */
/* Configure main USART port */
uint8_t hwsettings_mainport;
HwSettingsRM_MainPortGet(&hwsettings_mainport);
switch (hwsettings_mainport) {
case HWSETTINGS_RM_MAINPORT_DISABLED:
break;
case HWSETTINGS_RM_MAINPORT_TELEMETRY:
PIOS_Board_configure_com(&pios_usart_main_cfg, PIOS_COM_TELEM_RF_RX_BUF_LEN, PIOS_COM_TELEM_RF_TX_BUF_LEN, &pios_usart_com_driver, &pios_com_telem_rf_id);
break;
case HWSETTINGS_RM_MAINPORT_GPS:
PIOS_Board_configure_com(&pios_usart_main_cfg, PIOS_COM_GPS_RX_BUF_LEN, PIOS_COM_GPS_TX_BUF_LEN, &pios_usart_com_driver, &pios_com_gps_id);
break;
case HWSETTINGS_RM_MAINPORT_SBUS:
#if defined(PIOS_INCLUDE_SBUS)
{
uint32_t pios_usart_sbus_id;
if (PIOS_USART_Init(&pios_usart_sbus_id, &pios_usart_sbus_main_cfg)) {
PIOS_Assert(0);
}
uint32_t pios_sbus_id;
if (PIOS_SBus_Init(&pios_sbus_id, &pios_sbus_cfg, &pios_usart_com_driver, pios_usart_sbus_id)) {
PIOS_Assert(0);
}
uint32_t pios_sbus_rcvr_id;
if (PIOS_RCVR_Init(&pios_sbus_rcvr_id, &pios_sbus_rcvr_driver, pios_sbus_id)) {
PIOS_Assert(0);
}
pios_rcvr_group_map[MANUALCONTROLSETTINGS_CHANNELGROUPS_SBUS] = pios_sbus_rcvr_id;
}
#endif
break;
case HWSETTINGS_RM_MAINPORT_DSM:
// Force binding to zero on the main port
hwsettings_DSMxBind = 0;
// TODO: Define the various Channelgroup for Revo dsm inputs and handle here
PIOS_Board_configure_dsm(&pios_usart_dsm_main_cfg, &pios_dsm_main_cfg,
&pios_usart_com_driver, MANUALCONTROLSETTINGS_CHANNELGROUPS_DSMMAINPORT, &hwsettings_DSMxBind);
break;
case HWSETTINGS_RM_MAINPORT_DEBUGCONSOLE:
#if defined(PIOS_INCLUDE_DEBUG_CONSOLE)
{
PIOS_Board_configure_com(&pios_usart_main_cfg, 0, PIOS_COM_DEBUGCONSOLE_TX_BUF_LEN, &pios_usart_com_driver, &pios_com_debug_id);
}
#endif /* PIOS_INCLUDE_DEBUG_CONSOLE */
break;
case HWSETTINGS_RM_MAINPORT_COMBRIDGE:
PIOS_Board_configure_com(&pios_usart_main_cfg, PIOS_COM_BRIDGE_RX_BUF_LEN, PIOS_COM_BRIDGE_TX_BUF_LEN, &pios_usart_com_driver, &pios_com_bridge_id);
break;
case HWSETTINGS_RM_MAINPORT_OSDHK:
PIOS_Board_configure_com(&pios_usart_hkosd_main_cfg, PIOS_COM_HKOSD_RX_BUF_LEN, PIOS_COM_HKOSD_TX_BUF_LEN, &pios_usart_com_driver, &pios_com_hkosd_id);
break;
} /* hwsettings_rm_mainport */
if (hwsettings_mainport != HWSETTINGS_RM_MAINPORT_SBUS) {
GPIO_Init(pios_sbus_cfg.inv.gpio, &pios_sbus_cfg.inv.init);
GPIO_WriteBit(pios_sbus_cfg.inv.gpio, pios_sbus_cfg.inv.init.GPIO_Pin, pios_sbus_cfg.gpio_inv_disable);
}
/* Initalize the RFM22B radio COM device. */
#if defined(PIOS_INCLUDE_RFM22B)
/* Fetch the OPinkSettings object. */
OPLinkSettingsData oplinkSettings;
OPLinkSettingsGet(&oplinkSettings);
// Initialize out status object.
OPLinkStatusData oplinkStatus;
OPLinkStatusGet(&oplinkStatus);
oplinkStatus.BoardType = bdinfo->board_type;
PIOS_BL_HELPER_FLASH_Read_Description(oplinkStatus.Description, OPLINKSTATUS_DESCRIPTION_NUMELEM);
PIOS_SYS_SerialNumberGetBinary(oplinkStatus.CPUSerial);
oplinkStatus.BoardRevision = bdinfo->board_rev;
/* Is the radio turned on? */
bool is_coordinator = (oplinkSettings.Coordinator == OPLINKSETTINGS_COORDINATOR_TRUE);
bool is_oneway = (oplinkSettings.OneWay == OPLINKSETTINGS_ONEWAY_TRUE);
bool ppm_mode = (oplinkSettings.PPM == OPLINKSETTINGS_PPM_TRUE);
bool ppm_only = (oplinkSettings.PPMOnly == OPLINKSETTINGS_PPMONLY_TRUE);
if (oplinkSettings.MaxRFPower != OPLINKSETTINGS_MAXRFPOWER_0) {
/* Configure the RFM22B device. */
const struct pios_rfm22b_cfg *rfm22b_cfg = PIOS_BOARD_HW_DEFS_GetRfm22Cfg(bdinfo->board_rev);
if (PIOS_RFM22B_Init(&pios_rfm22b_id, PIOS_RFM22_SPI_PORT, rfm22b_cfg->slave_num, rfm22b_cfg)) {
PIOS_Assert(0);
}
/* Configure the radio com interface */
uint8_t *rx_buffer = (uint8_t *)pios_malloc(PIOS_COM_RFM22B_RF_RX_BUF_LEN);
uint8_t *tx_buffer = (uint8_t *)pios_malloc(PIOS_COM_RFM22B_RF_TX_BUF_LEN);
PIOS_Assert(rx_buffer);
PIOS_Assert(tx_buffer);
if (PIOS_COM_Init(&pios_com_rf_id, &pios_rfm22b_com_driver, pios_rfm22b_id,
rx_buffer, PIOS_COM_RFM22B_RF_RX_BUF_LEN,
tx_buffer, PIOS_COM_RFM22B_RF_TX_BUF_LEN)) {
PIOS_Assert(0);
}
/* Set Telemetry to use OPLinkMini if no other telemetry is configured (USB always overrides anyway) */
if (!pios_com_telem_rf_id) {
pios_com_telem_rf_id = pios_com_rf_id;
}
oplinkStatus.LinkState = OPLINKSTATUS_LINKSTATE_ENABLED;
// Set the RF data rate on the modem to ~2X the selected buad rate because the modem is half duplex.
enum rfm22b_datarate datarate = RFM22_datarate_64000;
switch (oplinkSettings.ComSpeed) {
case OPLINKSETTINGS_COMSPEED_4800:
datarate = RFM22_datarate_9600;
break;
case OPLINKSETTINGS_COMSPEED_9600:
datarate = RFM22_datarate_19200;
break;
case OPLINKSETTINGS_COMSPEED_19200:
datarate = RFM22_datarate_32000;
break;
case OPLINKSETTINGS_COMSPEED_38400:
datarate = RFM22_datarate_64000;
break;
case OPLINKSETTINGS_COMSPEED_57600:
datarate = RFM22_datarate_100000;
break;
case OPLINKSETTINGS_COMSPEED_115200:
datarate = RFM22_datarate_192000;
break;
}
/* Set the radio configuration parameters. */
PIOS_RFM22B_SetCoordinatorID(pios_rfm22b_id, oplinkSettings.CoordID);
PIOS_RFM22B_SetChannelConfig(pios_rfm22b_id, datarate, oplinkSettings.MinChannel, oplinkSettings.MaxChannel, is_coordinator, is_oneway, ppm_mode, ppm_only);
/* Set the PPM callback if we should be receiving PPM. */
if (ppm_mode || (ppm_only && !is_coordinator)) {
PIOS_RFM22B_SetPPMCallback(pios_rfm22b_id, PIOS_Board_PPM_callback);
}
/* Set the modem Tx poer level */
switch (oplinkSettings.MaxRFPower) {
case OPLINKSETTINGS_MAXRFPOWER_125:
PIOS_RFM22B_SetTxPower(pios_rfm22b_id, RFM22_tx_pwr_txpow_0);
break;
case OPLINKSETTINGS_MAXRFPOWER_16:
PIOS_RFM22B_SetTxPower(pios_rfm22b_id, RFM22_tx_pwr_txpow_1);
break;
case OPLINKSETTINGS_MAXRFPOWER_316:
PIOS_RFM22B_SetTxPower(pios_rfm22b_id, RFM22_tx_pwr_txpow_2);
break;
case OPLINKSETTINGS_MAXRFPOWER_63:
PIOS_RFM22B_SetTxPower(pios_rfm22b_id, RFM22_tx_pwr_txpow_3);
break;
case OPLINKSETTINGS_MAXRFPOWER_126:
PIOS_RFM22B_SetTxPower(pios_rfm22b_id, RFM22_tx_pwr_txpow_4);
break;
case OPLINKSETTINGS_MAXRFPOWER_25:
PIOS_RFM22B_SetTxPower(pios_rfm22b_id, RFM22_tx_pwr_txpow_5);
break;
case OPLINKSETTINGS_MAXRFPOWER_50:
PIOS_RFM22B_SetTxPower(pios_rfm22b_id, RFM22_tx_pwr_txpow_6);
break;
case OPLINKSETTINGS_MAXRFPOWER_100:
PIOS_RFM22B_SetTxPower(pios_rfm22b_id, RFM22_tx_pwr_txpow_7);
break;
default:
// do nothing
break;
}
/* Reinitialize the modem. */
PIOS_RFM22B_Reinit(pios_rfm22b_id);
} else {
oplinkStatus.LinkState = OPLINKSTATUS_LINKSTATE_DISABLED;
}
OPLinkStatusSet(&oplinkStatus);
#endif /* PIOS_INCLUDE_RFM22B */
#if defined(PIOS_INCLUDE_PWM) || defined(PIOS_INCLUDE_PWM)
const struct pios_servo_cfg *pios_servo_cfg;
// default to servo outputs only
pios_servo_cfg = &pios_servo_cfg_out;
#endif
/* Configure the receiver port*/
uint8_t hwsettings_rcvrport;
HwSettingsRM_RcvrPortGet(&hwsettings_rcvrport);
//
switch (hwsettings_rcvrport) {
case HWSETTINGS_RM_RCVRPORT_DISABLED:
break;
case HWSETTINGS_RM_RCVRPORT_PWM:
#if defined(PIOS_INCLUDE_PWM)
/* Set up the receiver port. Later this should be optional */
PIOS_Board_configure_pwm(&pios_pwm_cfg);
#endif /* PIOS_INCLUDE_PWM */
break;
case HWSETTINGS_RM_RCVRPORT_PPM:
case HWSETTINGS_RM_RCVRPORT_PPMOUTPUTS:
case HWSETTINGS_RM_RCVRPORT_PPMPWM:
case HWSETTINGS_RM_RCVRPORT_PPMTELEMETRY:
#if defined(PIOS_INCLUDE_PPM)
PIOS_Board_configure_ppm(&pios_ppm_cfg);
if (hwsettings_rcvrport == HWSETTINGS_RM_RCVRPORT_PPMOUTPUTS) {
// configure servo outputs and the remaining 5 inputs as outputs
pios_servo_cfg = &pios_servo_cfg_out_in_ppm;
}
// enable pwm on the remaining channels
if (hwsettings_rcvrport == HWSETTINGS_RM_RCVRPORT_PPMPWM) {
PIOS_Board_configure_pwm(&pios_pwm_ppm_cfg);
}
if (hwsettings_rcvrport == HWSETTINGS_RM_RCVRPORT_PPMTELEMETRY) {
PIOS_Board_configure_com(&pios_usart_rcvrport_cfg, PIOS_COM_TELEM_RF_RX_BUF_LEN, PIOS_COM_TELEM_RF_TX_BUF_LEN, &pios_usart_com_driver, &pios_com_telem_rf_id);
}
break;
#endif /* PIOS_INCLUDE_PPM */
case HWSETTINGS_RM_RCVRPORT_OUTPUTS:
// configure only the servo outputs
pios_servo_cfg = &pios_servo_cfg_out_in;
break;
case HWSETTINGS_RM_RCVRPORT_TELEMETRY:
PIOS_Board_configure_com(&pios_usart_rcvrport_cfg, PIOS_COM_TELEM_RF_RX_BUF_LEN, PIOS_COM_TELEM_RF_TX_BUF_LEN, &pios_usart_com_driver, &pios_com_telem_rf_id);
break;
}
#if defined(PIOS_INCLUDE_GCSRCVR)
GCSReceiverInitialize();
uint32_t pios_gcsrcvr_id;
PIOS_GCSRCVR_Init(&pios_gcsrcvr_id);
uint32_t pios_gcsrcvr_rcvr_id;
if (PIOS_RCVR_Init(&pios_gcsrcvr_rcvr_id, &pios_gcsrcvr_rcvr_driver, pios_gcsrcvr_id)) {
PIOS_Assert(0);
}
pios_rcvr_group_map[MANUALCONTROLSETTINGS_CHANNELGROUPS_GCS] = pios_gcsrcvr_rcvr_id;
#endif /* PIOS_INCLUDE_GCSRCVR */
#if defined(PIOS_INCLUDE_OPLINKRCVR)
{
OPLinkReceiverInitialize();
uint32_t pios_oplinkrcvr_id;
PIOS_OPLinkRCVR_Init(&pios_oplinkrcvr_id);
uint32_t pios_oplinkrcvr_rcvr_id;
if (PIOS_RCVR_Init(&pios_oplinkrcvr_rcvr_id, &pios_oplinkrcvr_rcvr_driver, pios_oplinkrcvr_id)) {
PIOS_Assert(0);
}
pios_rcvr_group_map[MANUALCONTROLSETTINGS_CHANNELGROUPS_OPLINK] = pios_oplinkrcvr_rcvr_id;
}
#endif /* PIOS_INCLUDE_OPLINKRCVR */
#ifndef PIOS_ENABLE_DEBUG_PINS
// pios_servo_cfg points to the correct configuration based on input port settings
PIOS_Servo_Init(pios_servo_cfg);
#else
PIOS_DEBUG_Init(pios_tim_servoport_all_pins, NELEMENTS(pios_tim_servoport_all_pins));
#endif
// Disable GPIO_A8 Pullup to prevent wrong results on battery voltage readout
GPIO_InitTypeDef gpioA8 = {
.GPIO_Speed = GPIO_Speed_2MHz,
.GPIO_Mode = GPIO_Mode_IN,
.GPIO_PuPd = GPIO_PuPd_NOPULL,
.GPIO_Pin = GPIO_Pin_8,
.GPIO_OType = GPIO_OType_OD,
};
GPIO_Init(GPIOA, &gpioA8);
if (PIOS_I2C_Init(&pios_i2c_mag_pressure_adapter_id, &pios_i2c_mag_pressure_adapter_cfg)) {
PIOS_DEBUG_Assert(0);
}
PIOS_DELAY_WaitmS(50);
#if defined(PIOS_INCLUDE_ADC)
PIOS_ADC_Init(&pios_adc_cfg);
#endif
#if defined(PIOS_INCLUDE_MPU6000)
PIOS_MPU6000_Init(pios_spi_gyro_id, 0, &pios_mpu6000_cfg);
PIOS_MPU6000_CONFIG_Configure();
PIOS_MPU6000_Register();
#endif
#if defined(PIOS_INCLUDE_HMC5X83)
onboard_mag = PIOS_HMC5x83_Init(&pios_hmc5x83_cfg, pios_i2c_mag_pressure_adapter_id, 0);
PIOS_HMC5x83_Register(onboard_mag);
#endif
#if defined(PIOS_INCLUDE_MS5611)
PIOS_MS5611_Init(&pios_ms5611_cfg, pios_i2c_mag_pressure_adapter_id);
PIOS_MS5611_Register();
#endif
#ifdef PIOS_INCLUDE_WS2811
#include <pios_ws2811.h>
HwSettingsWS2811LED_OutOptions ws2811_pin_settings;
HwSettingsWS2811LED_OutGet(&ws2811_pin_settings);
if (ws2811_pin_settings != HWSETTINGS_WS2811LED_OUT_DISABLED && ws2811_pin_settings < NELEMENTS(pios_ws2811_pin_cfg)) {
PIOS_WS2811_Init(&pios_ws2811_cfg, &pios_ws2811_pin_cfg[ws2811_pin_settings]);
}
#endif // PIOS_INCLUDE_WS2811
}
