void mainboard_set_port_clk_dp(struct intel_dp *intel_dp)
{
u32 ddi_pll_sel = 0;
switch (intel_dp->link_bw) {
case DP_LINK_BW_1_62:
ddi_pll_sel = PORT_CLK_SEL_LCPLL_810;
break;
case DP_LINK_BW_2_7:
ddi_pll_sel = PORT_CLK_SEL_LCPLL_1350;
break;
case DP_LINK_BW_5_4:
ddi_pll_sel = PORT_CLK_SEL_LCPLL_2700;
break;
default:
printk(BIOS_ERR, "invalid link bw %d\n", intel_dp->link_bw);
return;
}
gtt_write(PORT_CLK_SEL(intel_dp->port), ddi_pll_sel);
}
static void emulate_monitor_status_change(struct intel_vgpu *vgpu)
{
struct drm_i915_private *dev_priv = vgpu->gvt->dev_priv;
vgpu_vreg(vgpu, SDEISR) &= ~(SDE_PORTB_HOTPLUG_CPT |
SDE_PORTC_HOTPLUG_CPT |
SDE_PORTD_HOTPLUG_CPT);
if (IS_SKYLAKE(dev_priv) || IS_KABYLAKE(dev_priv)) {
vgpu_vreg(vgpu, SDEISR) &= ~(SDE_PORTA_HOTPLUG_SPT |
SDE_PORTE_HOTPLUG_SPT);
vgpu_vreg(vgpu, SKL_FUSE_STATUS) |=
SKL_FUSE_DOWNLOAD_STATUS |
SKL_FUSE_PG_DIST_STATUS(SKL_PG0) |
SKL_FUSE_PG_DIST_STATUS(SKL_PG1) |
SKL_FUSE_PG_DIST_STATUS(SKL_PG2);
vgpu_vreg(vgpu, LCPLL1_CTL) |=
LCPLL_PLL_ENABLE |
LCPLL_PLL_LOCK;
vgpu_vreg(vgpu, LCPLL2_CTL) |= LCPLL_PLL_ENABLE;
}
if (intel_vgpu_has_monitor_on_port(vgpu, PORT_B)) {
vgpu_vreg(vgpu, SFUSE_STRAP) |= SFUSE_STRAP_DDIB_DETECTED;
vgpu_vreg(vgpu, TRANS_DDI_FUNC_CTL(TRANSCODER_A)) &=
~(TRANS_DDI_BPC_MASK | TRANS_DDI_MODE_SELECT_MASK |
TRANS_DDI_PORT_MASK);
vgpu_vreg(vgpu, TRANS_DDI_FUNC_CTL(TRANSCODER_A)) |=
(TRANS_DDI_BPC_8 | TRANS_DDI_MODE_SELECT_DP_SST |
(PORT_B << TRANS_DDI_PORT_SHIFT) |
TRANS_DDI_FUNC_ENABLE);
if (IS_BROADWELL(dev_priv)) {
vgpu_vreg(vgpu, PORT_CLK_SEL(PORT_B)) &=
~PORT_CLK_SEL_MASK;
vgpu_vreg(vgpu, PORT_CLK_SEL(PORT_B)) |=
PORT_CLK_SEL_LCPLL_810;
}
vgpu_vreg(vgpu, DDI_BUF_CTL(PORT_B)) |= DDI_BUF_CTL_ENABLE;
vgpu_vreg(vgpu, DDI_BUF_CTL(PORT_B)) &= ~DDI_BUF_IS_IDLE;
vgpu_vreg(vgpu, SDEISR) |= SDE_PORTB_HOTPLUG_CPT;
}
if (intel_vgpu_has_monitor_on_port(vgpu, PORT_C)) {
vgpu_vreg(vgpu, SDEISR) |= SDE_PORTC_HOTPLUG_CPT;
vgpu_vreg(vgpu, TRANS_DDI_FUNC_CTL(TRANSCODER_A)) &=
~(TRANS_DDI_BPC_MASK | TRANS_DDI_MODE_SELECT_MASK |
TRANS_DDI_PORT_MASK);
vgpu_vreg(vgpu, TRANS_DDI_FUNC_CTL(TRANSCODER_A)) |=
(TRANS_DDI_BPC_8 | TRANS_DDI_MODE_SELECT_DP_SST |
(PORT_C << TRANS_DDI_PORT_SHIFT) |
TRANS_DDI_FUNC_ENABLE);
if (IS_BROADWELL(dev_priv)) {
vgpu_vreg(vgpu, PORT_CLK_SEL(PORT_C)) &=
~PORT_CLK_SEL_MASK;
vgpu_vreg(vgpu, PORT_CLK_SEL(PORT_C)) |=
PORT_CLK_SEL_LCPLL_810;
}
vgpu_vreg(vgpu, DDI_BUF_CTL(PORT_C)) |= DDI_BUF_CTL_ENABLE;
vgpu_vreg(vgpu, DDI_BUF_CTL(PORT_C)) &= ~DDI_BUF_IS_IDLE;
vgpu_vreg(vgpu, SFUSE_STRAP) |= SFUSE_STRAP_DDIC_DETECTED;
}
if (intel_vgpu_has_monitor_on_port(vgpu, PORT_D)) {
vgpu_vreg(vgpu, SDEISR) |= SDE_PORTD_HOTPLUG_CPT;
vgpu_vreg(vgpu, TRANS_DDI_FUNC_CTL(TRANSCODER_A)) &=
~(TRANS_DDI_BPC_MASK | TRANS_DDI_MODE_SELECT_MASK |
TRANS_DDI_PORT_MASK);
vgpu_vreg(vgpu, TRANS_DDI_FUNC_CTL(TRANSCODER_A)) |=
(TRANS_DDI_BPC_8 | TRANS_DDI_MODE_SELECT_DP_SST |
(PORT_D << TRANS_DDI_PORT_SHIFT) |
TRANS_DDI_FUNC_ENABLE);
if (IS_BROADWELL(dev_priv)) {
vgpu_vreg(vgpu, PORT_CLK_SEL(PORT_D)) &=
~PORT_CLK_SEL_MASK;
vgpu_vreg(vgpu, PORT_CLK_SEL(PORT_D)) |=
PORT_CLK_SEL_LCPLL_810;
}
vgpu_vreg(vgpu, DDI_BUF_CTL(PORT_D)) |= DDI_BUF_CTL_ENABLE;
vgpu_vreg(vgpu, DDI_BUF_CTL(PORT_D)) &= ~DDI_BUF_IS_IDLE;
vgpu_vreg(vgpu, SFUSE_STRAP) |= SFUSE_STRAP_DDID_DETECTED;
}
if ((IS_SKYLAKE(dev_priv) || IS_KABYLAKE(dev_priv)) &&
intel_vgpu_has_monitor_on_port(vgpu, PORT_E)) {
vgpu_vreg(vgpu, SDEISR) |= SDE_PORTE_HOTPLUG_SPT;
}
if (intel_vgpu_has_monitor_on_port(vgpu, PORT_A)) {
if (IS_BROADWELL(dev_priv))
vgpu_vreg(vgpu, GEN8_DE_PORT_ISR) |=
GEN8_PORT_DP_A_HOTPLUG;
else
vgpu_vreg(vgpu, SDEISR) |= SDE_PORTA_HOTPLUG_SPT;
vgpu_vreg(vgpu, DDI_BUF_CTL(PORT_A)) |= DDI_INIT_DISPLAY_DETECTED;
}
/* Clear host CRT status, so guest couldn't detect this host CRT. */
if (IS_BROADWELL(dev_priv))
vgpu_vreg(vgpu, PCH_ADPA) &= ~ADPA_CRT_HOTPLUG_MONITOR_MASK;
}
void hsw_fdi_link_train(struct drm_crtc *crtc)
{
struct drm_device *dev = crtc->dev;
struct drm_i915_private *dev_priv = dev->dev_private;
struct intel_crtc *intel_crtc = to_intel_crtc(crtc);
u32 temp, i, rx_ctl_val;
/* Set the FDI_RX_MISC pwrdn lanes and the 2 workarounds listed at the
* mode set "sequence for CRT port" document:
* - TP1 to TP2 time with the default value
* - FDI delay to 90h
*
* WaFDIAutoLinkSetTimingOverrride:hsw
*/
I915_WRITE(_FDI_RXA_MISC, FDI_RX_PWRDN_LANE1_VAL(2) |
FDI_RX_PWRDN_LANE0_VAL(2) |
FDI_RX_TP1_TO_TP2_48 | FDI_RX_FDI_DELAY_90);
/* Enable the PCH Receiver FDI PLL */
rx_ctl_val = dev_priv->fdi_rx_config | FDI_RX_ENHANCE_FRAME_ENABLE |
FDI_RX_PLL_ENABLE |
FDI_DP_PORT_WIDTH(intel_crtc->config.fdi_lanes);
I915_WRITE(_FDI_RXA_CTL, rx_ctl_val);
POSTING_READ(_FDI_RXA_CTL);
udelay(220);
/* Switch from Rawclk to PCDclk */
rx_ctl_val |= FDI_PCDCLK;
I915_WRITE(_FDI_RXA_CTL, rx_ctl_val);
/* Configure Port Clock Select */
I915_WRITE(PORT_CLK_SEL(PORT_E), intel_crtc->ddi_pll_sel);
/* Start the training iterating through available voltages and emphasis,
* testing each value twice. */
for (i = 0; i < ARRAY_SIZE(hsw_ddi_buf_ctl_values) * 2; i++) {
/* Configure DP_TP_CTL with auto-training */
I915_WRITE(DP_TP_CTL(PORT_E),
DP_TP_CTL_FDI_AUTOTRAIN |
DP_TP_CTL_ENHANCED_FRAME_ENABLE |
DP_TP_CTL_LINK_TRAIN_PAT1 |
DP_TP_CTL_ENABLE);
/* Configure and enable DDI_BUF_CTL for DDI E with next voltage.
* DDI E does not support port reversal, the functionality is
* achieved on the PCH side in FDI_RX_CTL, so no need to set the
* port reversal bit */
I915_WRITE(DDI_BUF_CTL(PORT_E),
DDI_BUF_CTL_ENABLE |
((intel_crtc->config.fdi_lanes - 1) << 1) |
hsw_ddi_buf_ctl_values[i / 2]);
POSTING_READ(DDI_BUF_CTL(PORT_E));
udelay(600);
/* Program PCH FDI Receiver TU */
I915_WRITE(_FDI_RXA_TUSIZE1, TU_SIZE(64));
/* Enable PCH FDI Receiver with auto-training */
rx_ctl_val |= FDI_RX_ENABLE | FDI_LINK_TRAIN_AUTO;
I915_WRITE(_FDI_RXA_CTL, rx_ctl_val);
POSTING_READ(_FDI_RXA_CTL);
/* Wait for FDI receiver lane calibration */
udelay(30);
/* Unset FDI_RX_MISC pwrdn lanes */
temp = I915_READ(_FDI_RXA_MISC);
temp &= ~(FDI_RX_PWRDN_LANE1_MASK | FDI_RX_PWRDN_LANE0_MASK);
I915_WRITE(_FDI_RXA_MISC, temp);
POSTING_READ(_FDI_RXA_MISC);
/* Wait for FDI auto training time */
udelay(5);
temp = I915_READ(DP_TP_STATUS(PORT_E));
if (temp & DP_TP_STATUS_AUTOTRAIN_DONE) {
DRM_DEBUG_KMS("FDI link training done on step %d\n", i);
/* Enable normal pixel sending for FDI */
I915_WRITE(DP_TP_CTL(PORT_E),
DP_TP_CTL_FDI_AUTOTRAIN |
DP_TP_CTL_LINK_TRAIN_NORMAL |
DP_TP_CTL_ENHANCED_FRAME_ENABLE |
DP_TP_CTL_ENABLE);
return;
}
temp = I915_READ(DDI_BUF_CTL(PORT_E));
temp &= ~DDI_BUF_CTL_ENABLE;
I915_WRITE(DDI_BUF_CTL(PORT_E), temp);
POSTING_READ(DDI_BUF_CTL(PORT_E));
/* Disable DP_TP_CTL and FDI_RX_CTL and retry */
temp = I915_READ(DP_TP_CTL(PORT_E));
temp &= ~(DP_TP_CTL_ENABLE | DP_TP_CTL_LINK_TRAIN_MASK);
temp |= DP_TP_CTL_LINK_TRAIN_PAT1;
I915_WRITE(DP_TP_CTL(PORT_E), temp);
POSTING_READ(DP_TP_CTL(PORT_E));
intel_wait_ddi_buf_idle(dev_priv, PORT_E);
rx_ctl_val &= ~FDI_RX_ENABLE;
I915_WRITE(_FDI_RXA_CTL, rx_ctl_val);
POSTING_READ(_FDI_RXA_CTL);
/* Reset FDI_RX_MISC pwrdn lanes */
temp = I915_READ(_FDI_RXA_MISC);
temp &= ~(FDI_RX_PWRDN_LANE1_MASK | FDI_RX_PWRDN_LANE0_MASK);
temp |= FDI_RX_PWRDN_LANE1_VAL(2) | FDI_RX_PWRDN_LANE0_VAL(2);
I915_WRITE(_FDI_RXA_MISC, temp);
POSTING_READ(_FDI_RXA_MISC);
}
DRM_ERROR("FDI link training failed!\n");
}
void intel_ddi_mode_set(struct drm_encoder *encoder,
struct drm_display_mode *mode,
struct drm_display_mode *adjusted_mode)
{
struct drm_device *dev = encoder->dev;
struct drm_i915_private *dev_priv = dev->dev_private;
struct drm_crtc *crtc = encoder->crtc;
struct intel_crtc *intel_crtc = to_intel_crtc(crtc);
struct intel_hdmi *intel_hdmi = enc_to_intel_hdmi(encoder);
int port = intel_hdmi->ddi_port;
int pipe = intel_crtc->pipe;
int p, n2, r2, valid=0;
u32 temp, i;
/* On Haswell, we need to enable the clocks and prepare DDI function to
* work in HDMI mode for this pipe.
*/
DRM_DEBUG_KMS("Preparing HDMI DDI mode for Haswell on port %c, pipe %c\n", port_name(port), pipe_name(pipe));
for (i=0; i < DRM_ARRAY_SIZE(wrpll_tmds_clock_table); i++) {
if (crtc->mode.clock == wrpll_tmds_clock_table[i].clock) {
p = wrpll_tmds_clock_table[i].p;
n2 = wrpll_tmds_clock_table[i].n2;
r2 = wrpll_tmds_clock_table[i].r2;
DRM_DEBUG_KMS("WR PLL clock: found settings for %dKHz refresh rate: p=%d, n2=%d, r2=%d\n",
crtc->mode.clock,
p, n2, r2);
valid = 1;
break;
}
}
if (!valid) {
DRM_ERROR("Unable to find WR PLL clock settings for %dKHz refresh rate\n",
crtc->mode.clock);
return;
}
/* Enable LCPLL if disabled */
temp = I915_READ(LCPLL_CTL);
if (temp & LCPLL_PLL_DISABLE)
I915_WRITE(LCPLL_CTL,
temp & ~LCPLL_PLL_DISABLE);
/* Configure WR PLL 1, program the correct divider values for
* the desired frequency and wait for warmup */
I915_WRITE(WRPLL_CTL1,
WRPLL_PLL_ENABLE |
WRPLL_PLL_SELECT_LCPLL_2700 |
WRPLL_DIVIDER_REFERENCE(r2) |
WRPLL_DIVIDER_FEEDBACK(n2) |
WRPLL_DIVIDER_POST(p));
DELAY(20);
/* Use WRPLL1 clock to drive the output to the port, and tell the pipe to use
* this port for connection.
*/
I915_WRITE(PORT_CLK_SEL(port),
PORT_CLK_SEL_WRPLL1);
I915_WRITE(PIPE_CLK_SEL(pipe),
PIPE_CLK_SEL_PORT(port));
DELAY(20);
if (intel_hdmi->has_audio) {
/* Proper support for digital audio needs a new logic and a new set
* of registers, so we leave it for future patch bombing.
*/
DRM_DEBUG_DRIVER("HDMI audio on pipe %c not yet supported on DDI\n",
pipe_name(intel_crtc->pipe));
}
/* Enable PIPE_DDI_FUNC_CTL for the pipe to work in HDMI mode */
temp = I915_READ(DDI_FUNC_CTL(pipe));
temp &= ~PIPE_DDI_PORT_MASK;
temp &= ~PIPE_DDI_BPC_12;
temp |= PIPE_DDI_SELECT_PORT(port) |
PIPE_DDI_MODE_SELECT_HDMI |
((intel_crtc->bpp > 24) ?
PIPE_DDI_BPC_12 :
PIPE_DDI_BPC_8) |
PIPE_DDI_FUNC_ENABLE;
I915_WRITE(DDI_FUNC_CTL(pipe), temp);
intel_hdmi_set_avi_infoframe(encoder, adjusted_mode);
intel_hdmi_set_spd_infoframe(encoder);
}
void hsw_fdi_link_train(struct drm_crtc *crtc)
{
struct drm_device *dev = crtc->dev;
struct drm_i915_private *dev_priv = dev->dev_private;
struct intel_crtc *intel_crtc = to_intel_crtc(crtc);
int pipe = intel_crtc->pipe;
u32 reg, temp, i;
/* Configure CPU PLL, wait for warmup */
I915_WRITE(SPLL_CTL,
SPLL_PLL_ENABLE |
SPLL_PLL_FREQ_1350MHz |
SPLL_PLL_SCC);
/* Use SPLL to drive the output when in FDI mode */
I915_WRITE(PORT_CLK_SEL(PORT_E),
PORT_CLK_SEL_SPLL);
I915_WRITE(PIPE_CLK_SEL(pipe),
PIPE_CLK_SEL_PORT(PORT_E));
DELAY(20);
/* Start the training iterating through available voltages and emphasis */
for (i=0; i < DRM_ARRAY_SIZE(hsw_ddi_buf_ctl_values); i++) {
/* Configure DP_TP_CTL with auto-training */
I915_WRITE(DP_TP_CTL(PORT_E),
DP_TP_CTL_FDI_AUTOTRAIN |
DP_TP_CTL_ENHANCED_FRAME_ENABLE |
DP_TP_CTL_LINK_TRAIN_PAT1 |
DP_TP_CTL_ENABLE);
/* Configure and enable DDI_BUF_CTL for DDI E with next voltage */
temp = I915_READ(DDI_BUF_CTL(PORT_E));
temp = (temp & ~DDI_BUF_EMP_MASK);
I915_WRITE(DDI_BUF_CTL(PORT_E),
temp |
DDI_BUF_CTL_ENABLE |
DDI_PORT_WIDTH_X2 |
hsw_ddi_buf_ctl_values[i]);
DELAY(600);
/* Enable CPU FDI Receiver with auto-training */
reg = FDI_RX_CTL(pipe);
I915_WRITE(reg,
I915_READ(reg) |
FDI_LINK_TRAIN_AUTO |
FDI_RX_ENABLE |
FDI_LINK_TRAIN_PATTERN_1_CPT |
FDI_RX_ENHANCE_FRAME_ENABLE |
FDI_PORT_WIDTH_2X_LPT |
FDI_RX_PLL_ENABLE);
POSTING_READ(reg);
DELAY(100);
temp = I915_READ(DP_TP_STATUS(PORT_E));
if (temp & DP_TP_STATUS_AUTOTRAIN_DONE) {
DRM_DEBUG_DRIVER("BUF_CTL training done on %d step\n", i);
/* Enable normal pixel sending for FDI */
I915_WRITE(DP_TP_CTL(PORT_E),
DP_TP_CTL_FDI_AUTOTRAIN |
DP_TP_CTL_LINK_TRAIN_NORMAL |
DP_TP_CTL_ENHANCED_FRAME_ENABLE |
DP_TP_CTL_ENABLE);
/* Enable PIPE_DDI_FUNC_CTL for the pipe to work in FDI mode */
temp = I915_READ(DDI_FUNC_CTL(pipe));
temp &= ~PIPE_DDI_PORT_MASK;
temp |= PIPE_DDI_SELECT_PORT(PORT_E) |
PIPE_DDI_MODE_SELECT_FDI |
PIPE_DDI_FUNC_ENABLE |
PIPE_DDI_PORT_WIDTH_X2;
I915_WRITE(DDI_FUNC_CTL(pipe),
temp);
break;
} else {
DRM_ERROR("Error training BUF_CTL %d\n", i);
/* Disable DP_TP_CTL and FDI_RX_CTL) and retry */
I915_WRITE(DP_TP_CTL(PORT_E),
I915_READ(DP_TP_CTL(PORT_E)) &
~DP_TP_CTL_ENABLE);
I915_WRITE(FDI_RX_CTL(pipe),
I915_READ(FDI_RX_CTL(pipe)) &
~FDI_RX_PLL_ENABLE);
continue;
}
}
DRM_DEBUG_KMS("FDI train done.\n");
}
