//*****************************************************************************
//
//! Set (Request) the main power source
//
//*****************************************************************************
void
PowerCtrlSourceSet(uint32_t ui32PowerConfig)
{
//
// Check the arguments.
//
ASSERT((ui32PowerConfig == PWRCTRL_PWRSRC_DCDC) ||
(ui32PowerConfig == PWRCTRL_PWRSRC_GLDO) ||
(ui32PowerConfig == PWRCTRL_PWRSRC_ULDO));
//
// Configure the power.
//
if(ui32PowerConfig == PWRCTRL_PWRSRC_DCDC) {
HWREG(AON_SYSCTL_BASE + AON_SYSCTL_O_PWRCTL) |=
(AON_SYSCTL_PWRCTL_DCDC_EN | AON_SYSCTL_PWRCTL_DCDC_ACTIVE);
}
else if (ui32PowerConfig == PWRCTRL_PWRSRC_GLDO)
{
HWREG(AON_SYSCTL_BASE + AON_SYSCTL_O_PWRCTL) &=
~(AON_SYSCTL_PWRCTL_DCDC_EN | AON_SYSCTL_PWRCTL_DCDC_ACTIVE);
}
else
{
PRCMMcuUldoConfigure(true);
}
}
/*
* ======== Power_sleep ========
*/
Power_Status Power_sleep(Power_SleepState sleepState, UArg arg0, UArg arg1)
{
Power_Status status = Power_SOK;
UInt xosc_hf_active = FALSE;
Power_Event postEventLate;
UInt32 poweredDomains = 0;
Bool exitNow = FALSE;
Power_Event preEvent;
Power_Event postEvent;
UInt32 constraints;
Bool retainCache = FALSE;
UInt32 modeVIMS;
UInt taskKey;
UInt swiKey;
UInt hwiKey;
/* first validate the sleep code */
if ( sleepState != Power_STANDBY) {
status = Power_EFAIL;
}
if (status == Power_SOK) {
/* make sure Power is not still busy with a previous transition */
hwiKey = Hwi_disable();
if (Power_module->state == Power_ACTIVE) {
/* set transition state to entering sleep */
Power_module->state = Power_ENTERING_SLEEP;
}
else {
exitNow = TRUE;
}
Hwi_restore(hwiKey);
if (exitNow == TRUE) {
status = Power_EBUSY;
}
else {
/* setup sleep vars */
if (sleepState == Power_STANDBY) {
preEvent = Power_ENTERING_STANDBY;
postEvent = Power_AWAKE_STANDBY;
postEventLate = Power_AWAKE_STANDBY_LATE;
}
/* disable Task scheduling; allow Swis and Hwis for notifications */
taskKey = Task_disable();
/* signal all clients registered for pre-sleep notification */
status = Power_notify(preEvent);
/* check for any error */
if (status != Power_SOK) {
Power_module->state = Power_ACTIVE;
Task_restore(taskKey); /* re-enable scheduler */
return (status);
}
/* now disable Swi scheduling */
swiKey = Swi_disable();
/* freeze the IOs on the boundary between MCU and AON */
AONIOCFreezeEnable();
/* if XOSC_HF is active, force it off */
if(OSCClockSourceGet(OSC_SRC_CLK_HF) == OSC_XOSC_HF) {
xosc_hf_active = TRUE;
ti_sysbios_family_arm_cc26xx_Power_XOSC_HF(DISABLE);
}
/* allow AUX to power down */
AONWUCAuxWakeupEvent(AONWUC_AUX_ALLOW_SLEEP);
/* make sure writes take effect */
SysCtrlAonSync();
/* invoke specific sequences to activate sleep states... */
if (sleepState == Power_STANDBY) {
/* query and save domain states before powering them off */
if (Power_getDependencyCount(DOMAIN_RFCORE)) {
poweredDomains |= PRCM_DOMAIN_RFCORE;
}
if (Power_getDependencyCount(DOMAIN_SERIAL)){
poweredDomains |= PRCM_DOMAIN_SERIAL;
}
if (Power_getDependencyCount(DOMAIN_PERIPH)) {
poweredDomains |= PRCM_DOMAIN_PERIPH;
}
/* gate running deep sleep clocks for Crypto and DMA */
if (Power_getDependencyCount(PERIPH_CRYPTO)) {
PRCMPeripheralDeepSleepDisable(
ti_sysbios_family_arm_cc26xx_Power_db[
PERIPH_CRYPTO].driverlibID);
}
if (Power_getDependencyCount(PERIPH_UDMA)) {
PRCMPeripheralDeepSleepDisable(
ti_sysbios_family_arm_cc26xx_Power_db[
PERIPH_UDMA].driverlibID);
}
/* make sure clock settings take effect */
PRCMLoadSet();
/* request power off of domains in the MCU voltage domain */
PRCMPowerDomainOff(poweredDomains | PRCM_DOMAIN_CPU);
/* request uLDO during standby */
PRCMMcuUldoConfigure(true);
/* query constraints to determine if cache should be retained */
constraints = Power_getConstraintInfo();
if ((constraints & Power_SB_VIMS_CACHE_RETAIN) != 0) {
retainCache = TRUE;
}
/* if don't want retention in standby, disable it now ... */
if (retainCache == FALSE) {
modeVIMS = VIMSModeGet(VIMS_BASE);
/* wait if invalidate in progress... */
while (modeVIMS == VIMS_MODE_CHANGING) {
modeVIMS = VIMSModeGet(VIMS_BASE);
}
PRCMCacheRetentionDisable();
VIMSModeSet(VIMS_BASE, VIMS_MODE_OFF);
}
/* setup recharge parameters */
SysCtrlSetRechargeBeforePowerDown(XoscInHighPowerMode);
/* make sure all writes have taken effect */
SysCtrlAonSync();
/* invoke deep sleep to go to STANDBY */
PRCMDeepSleep();
/* if didn't retain cache in standby, re-enable retention now */
if (retainCache == FALSE) {
VIMSModeSet(VIMS_BASE, modeVIMS);
PRCMCacheRetentionEnable();
}
/* force power on of AUX to keep it on when system is not
* sleeping; this also counts as a write to the AON interface
* ensuring that a following sync of the AON interface will
* force an update of all registers
*/
AONWUCAuxWakeupEvent(AONWUC_AUX_WAKEUP);
while(!(AONWUCPowerStatusGet() & AONWUC_AUX_POWER_ON)) {};
/* if XOSC_HF was forced off above, initiate switch back */
if (xosc_hf_active == TRUE) {
ti_sysbios_family_arm_cc26xx_Power_XOSC_HF(ENABLE);
}
/* restore power domain states in effect before standby */
PRCMPowerDomainOn(poweredDomains);
while (PRCMPowerDomainStatus(poweredDomains) !=
PRCM_DOMAIN_POWER_ON){};
/* restore deep sleep clocks of Crypto and DMA */
if (Power_getDependencyCount(PERIPH_CRYPTO)) {
PRCMPeripheralDeepSleepEnable(
ti_sysbios_family_arm_cc26xx_Power_db[
PERIPH_CRYPTO].driverlibID);
}
if (Power_getDependencyCount(PERIPH_UDMA)) {
PRCMPeripheralDeepSleepEnable(
ti_sysbios_family_arm_cc26xx_Power_db[
PERIPH_UDMA].driverlibID);
}
/* make sure clock settings take effect */
PRCMLoadSet();
}
/* release request for uLDO */
PRCMMcuUldoConfigure(false);
/* set transition state to EXITING_SLEEP */
Power_module->state = Power_EXITING_SLEEP;
/*
* signal clients registered for early post-sleep notification;
* this should be used to initialize any timing critical or IO
* dependent hardware
*/
status = Power_notify(postEvent);
/* disable IO freeze and ensure RTC shadow value is updated */
AONIOCFreezeDisable();
SysCtrlAonSync();
/* re-enable interrupts */
CPUcpsie();
/* signal all clients registered for late post-sleep notification */
status = Power_notify(postEventLate);
/* now clear the transition state before re-enabling scheduler */
Power_module->state = Power_ACTIVE;
/* re-enable Swi scheduling */
Swi_restore(swiKey);
/* adjust recharge parameters */
SysCtrlAdjustRechargeAfterPowerDown();
/* re-enable Task scheduling */
Task_restore(taskKey);
/* check for any notification error */
if (status != Power_SOK) {
return (status);
}
}
}
return (status);
}
