/*
==================
RB_RenderFlares
Because flares are simulating an occular effect, they should be drawn after
everything (all views) in the entire frame has been drawn.
Because of the way portals use the depth buffer to mark off areas, the
needed information would be lost after each view, so we are forced to draw
flares after each view.
The resulting artifact is that flares in mirrors or portals don't dim properly
when occluded by something in the main view, and portal flares that should
extend past the portal edge will be overwritten.
==================
*/
void RB_RenderFlares (void) {
flare_t *f;
flare_t **prev;
qboolean draw;
if ( !r_flares->value ) {
return;
}
if(r_flareCoeff->modified)
{
if(r_flareCoeff->value == 0.0f)
flareCoeff = atof(FLARE_STDCOEFF);
else
flareCoeff = r_flareCoeff->value;
r_flareCoeff->modified = qfalse;
}
// Reset currentEntity to world so that any previously referenced entities
// don't have influence on the rendering of these flares (i.e. RF_ renderer flags).
backEnd.currentEntity = &tr.worldEntity;
backEnd.or = backEnd.viewParms.world;
// RB_AddDlightFlares();
// perform z buffer readback on each flare in this view
draw = qfalse;
prev = &r_activeFlares;
while ( ( f = *prev ) != NULL ) {
// throw out any flares that weren't added last frame
if ( f->addedFrame < backEnd.viewParms.frameCount - 1 ) {
*prev = f->next;
f->next = r_inactiveFlares;
r_inactiveFlares = f;
continue;
}
// don't draw any here that aren't from this scene / portal
f->drawIntensity = 0;
if ( f->frameSceneNum == backEnd.viewParms.frameSceneNum
&& f->inPortal == backEnd.viewParms.isPortal ) {
RB_TestFlare( f );
if ( f->drawIntensity ) {
draw = qtrue;
} else {
// this flare has completely faded out, so remove it from the chain
*prev = f->next;
f->next = r_inactiveFlares;
r_inactiveFlares = f;
continue;
}
}
prev = &f->next;
}
if ( !draw ) {
return; // none visible
}
if ( backEnd.viewParms.isPortal ) {
qglDisable (GL_CLIP_PLANE0);
}
qglPushMatrix();
qglLoadIdentity();
qglMatrixMode( GL_PROJECTION );
qglPushMatrix();
qglLoadIdentity();
qglOrtho( backEnd.viewParms.viewportX, backEnd.viewParms.viewportX + backEnd.viewParms.viewportWidth,
backEnd.viewParms.viewportY, backEnd.viewParms.viewportY + backEnd.viewParms.viewportHeight,
-99999, 99999 );
for ( f = r_activeFlares ; f ; f = f->next ) {
if ( f->frameSceneNum == backEnd.viewParms.frameSceneNum
&& f->inPortal == backEnd.viewParms.isPortal
&& f->drawIntensity ) {
RB_RenderFlare( f );
}
}
qglPopMatrix();
qglMatrixMode( GL_MODELVIEW );
qglPopMatrix();
}
/*
==================
RB_RenderFlares
Because flares are simulating an occular effect, they should be drawn after
everything (all views) in the entire frame has been drawn.
Because of the way portals use the depth buffer to mark off areas, the
needed information would be lost after each view, so we are forced to draw
flares after each view.
The resulting artifact is that flares in mirrors or portals don't dim properly
when occluded by something in the main view, and portal flares that should
extend past the portal edge will be overwritten.
==================
*/
void RB_RenderFlares(void)
{
flare_t *f;
flare_t **prev;
qboolean draw;
if (!r_flares->integer)
{
return;
}
// turned light flares back on. must evaluate problem id had with this
RB_AddDlightFlares();
RB_AddCoronaFlares();
// perform z buffer readback on each flare in this view
draw = qfalse;
prev = &r_activeFlares;
while ((f = *prev) != NULL)
{
// throw out any flares that weren't added last frame
if (f->addedFrame < backEnd.viewParms.frameCount - 1)
{
*prev = f->next;
f->next = r_inactiveFlares;
r_inactiveFlares = f;
continue;
}
// don't draw any here that aren't from this scene / portal
f->drawIntensity = 0;
if (f->frameSceneNum == backEnd.viewParms.frameSceneNum
&& f->inPortal == backEnd.viewParms.isPortal)
{
RB_TestFlare(f);
if (f->drawIntensity)
{
draw = qtrue;
}
else
{
// this flare has completely faded out, so remove it from the chain
*prev = f->next;
f->next = r_inactiveFlares;
r_inactiveFlares = f;
continue;
}
}
prev = &f->next;
}
if (!draw)
{
return; // none visible
}
if (backEnd.viewParms.isPortal)
{
qglDisable(GL_CLIP_PLANE0);
}
qglPushMatrix();
qglLoadIdentity();
qglMatrixMode(GL_PROJECTION);
qglPushMatrix();
qglLoadIdentity();
qglOrtho(backEnd.viewParms.viewportX, backEnd.viewParms.viewportX + backEnd.viewParms.viewportWidth,
backEnd.viewParms.viewportY, backEnd.viewParms.viewportY + backEnd.viewParms.viewportHeight,
-99999, 99999);
for (f = r_activeFlares ; f ; f = f->next)
{
if (f->frameSceneNum == backEnd.viewParms.frameSceneNum
&& f->inPortal == backEnd.viewParms.isPortal
&& f->drawIntensity)
{
RB_RenderFlare(f);
}
}
qglPopMatrix();
qglMatrixMode(GL_MODELVIEW);
qglPopMatrix();
}
/*
==================
RB_RenderFlares
Because flares are simulating an occular effect, they should be drawn after
everything (all views) in the entire frame has been drawn.
Because of the way portals use the depth buffer to mark off areas, the
needed information would be lost after each view, so we are forced to draw
flares after each view.
The resulting artifact is that flares in mirrors or portals don't dim properly
when occluded by something in the main view, and portal flares that should
extend past the portal edge will be overwritten.
==================
*/
void RB_RenderFlares(void)
{
flare_t *f;
flare_t **prev;
qboolean draw;
matrix_t ortho;
if(!r_flares->integer)
return;
#if 0
if(r_flareCoeff->modified)
{
if(r_flareCoeff->value == 0.0f)
flareCoeff = atof("150");
else
flareCoeff = r_flareCoeff->value;
r_flareCoeff->modified = qfalse;
}
#endif
// reset currentEntity to world so that any previously referenced entities don't have influence
// on the rendering of these flares (i.e. RF_ renderer flags).
backEnd.currentEntity = &tr.worldEntity;
backEnd.orientation = backEnd.viewParms.world;
GL_LoadModelViewMatrix(backEnd.viewParms.world.modelViewMatrix);
if(tr.world != NULL) // thx Thilo
{
RB_AddLightFlares();
}
// perform z buffer readback on each flare in this view
draw = qfalse;
prev = &r_activeFlares;
while((f = *prev) != NULL)
{
// throw out any flares that weren't added last frame
if(f->addedFrame < backEnd.viewParms.frameCount - 1)
{
*prev = f->next;
f->next = r_inactiveFlares;
r_inactiveFlares = f;
continue;
}
// don't draw any here that aren't from this scene / portal
f->drawIntensity = 0;
if(f->frameSceneNum == backEnd.viewParms.frameSceneNum && f->inPortal == backEnd.viewParms.isPortal)
{
RB_TestFlare(f);
if(f->drawIntensity)
{
draw = qtrue;
}
else
{
// this flare has completely faded out, so remove it from the chain
*prev = f->next;
f->next = r_inactiveFlares;
r_inactiveFlares = f;
continue;
}
}
prev = &f->next;
}
if(!draw)
{
// none visible
return;
}
if(backEnd.viewParms.isPortal)
{
qglDisable(GL_CLIP_PLANE0);
}
GL_CheckErrors();
GL_PushMatrix();
MatrixOrthogonalProjection(ortho, backEnd.viewParms.viewportX,
backEnd.viewParms.viewportX + backEnd.viewParms.viewportWidth,
backEnd.viewParms.viewportY, backEnd.viewParms.viewportY + backEnd.viewParms.viewportHeight,
-99999, 99999);
GL_LoadProjectionMatrix(ortho);
GL_LoadModelViewMatrix(matrixIdentity);
for(f = r_activeFlares; f; f = f->next)
{
if(f->frameSceneNum == backEnd.viewParms.frameSceneNum && f->inPortal == backEnd.viewParms.isPortal && f->drawIntensity)
RB_RenderFlare(f);
}
GL_PopMatrix();
GL_CheckErrors();
}
/*
==================
RB_RenderFlares
Because flares are simulating an occular effect, they should be drawn after
everything (all views) in the entire frame has been drawn.
Because of the way portals use the depth buffer to mark off areas, the
needed information would be lost after each view, so we are forced to draw
flares after each view.
The resulting artifact is that flares in mirrors or portals don't dim properly
when occluded by something in the main view, and portal flares that should
extend past the portal edge will be overwritten.
==================
*/
void RB_RenderFlares (void) {
flare_t *f;
flare_t **prev;
qboolean draw;
mat4_t oldmodelview, oldprojection, matrix;
if ( !r_flares->integer ) {
return;
}
if(r_flareCoeff->modified)
{
R_SetFlareCoeff();
r_flareCoeff->modified = qfalse;
}
// Reset currentEntity to world so that any previously referenced entities
// don't have influence on the rendering of these flares (i.e. RF_ renderer flags).
backEnd.currentEntity = &tr.worldEntity;
backEnd.or = backEnd.viewParms.world;
// (SA) turned light flares back on. must evaluate problem id had with this
RB_AddDlightFlares();
RB_AddCoronaFlares();
// perform z buffer readback on each flare in this view
draw = qfalse;
prev = &r_activeFlares;
while ( ( f = *prev ) != NULL ) {
// throw out any flares that weren't added last frame
if ( f->addedFrame < backEnd.viewParms.frameCount - 1 ) {
*prev = f->next;
f->next = r_inactiveFlares;
r_inactiveFlares = f;
continue;
}
// don't draw any here that aren't from this scene / portal
f->drawIntensity = 0;
if ( f->frameSceneNum == backEnd.viewParms.frameSceneNum
&& f->inPortal == backEnd.viewParms.isPortal ) {
RB_TestFlare( f );
if ( f->drawIntensity ) {
draw = qtrue;
} else {
// this flare has completely faded out, so remove it from the chain
*prev = f->next;
f->next = r_inactiveFlares;
r_inactiveFlares = f;
continue;
}
}
prev = &f->next;
}
if ( !draw ) {
return; // none visible
}
if ( backEnd.viewParms.isPortal ) {
qglDisable (GL_CLIP_PLANE0);
}
Mat4Copy(glState.projection, oldprojection);
Mat4Copy(glState.modelview, oldmodelview);
Mat4Identity(matrix);
GL_SetModelviewMatrix(matrix);
Mat4Ortho( backEnd.viewParms.viewportX, backEnd.viewParms.viewportX + backEnd.viewParms.viewportWidth,
backEnd.viewParms.viewportY, backEnd.viewParms.viewportY + backEnd.viewParms.viewportHeight,
-99999, 99999, matrix );
GL_SetProjectionMatrix(matrix);
for ( f = r_activeFlares ; f ; f = f->next ) {
if ( f->frameSceneNum == backEnd.viewParms.frameSceneNum
&& f->inPortal == backEnd.viewParms.isPortal
&& f->drawIntensity ) {
RB_RenderFlare( f );
}
}
GL_SetProjectionMatrix(oldprojection);
GL_SetModelviewMatrix(oldmodelview);
}
void RB_RenderFlares (void) {
flare_t *f;
flare_t **prev;
qboolean draw;
float cachedModelView[16];
float cachedProjection[16];
float ortho[16];
if ( !r_flares->integer ) {
return;
}
// RB_AddDlightFlares();
// perform z buffer readback on each flare in this view
draw = qfalse;
prev = &r_activeFlares;
while ( ( f = *prev ) != NULL ) {
// throw out any flares that weren't added last frame
if ( f->addedFrame < backEnd.viewParms.frameCount - 1 ) {
*prev = f->next;
f->next = r_inactiveFlares;
r_inactiveFlares = f;
continue;
}
// don't draw any here that aren't from this scene / portal
f->drawIntensity = 0;
if ( f->frameSceneNum == backEnd.viewParms.frameSceneNum
&& f->inPortal == backEnd.viewParms.isPortal ) {
RB_TestFlare( f );
if ( f->drawIntensity ) {
draw = qtrue;
} else {
// this flare has completely faded out, so remove it from the chain
*prev = f->next;
f->next = r_inactiveFlares;
r_inactiveFlares = f;
continue;
}
}
prev = &f->next;
}
if ( !draw ) {
return; // none visible
}
if ( backEnd.viewParms.isPortal ) {
GFX_SetPortalRendering( qfalse, NULL, NULL );
}
GFX_GetModelViewMatrix( cachedModelView );
GFX_GetProjectionMatrix( cachedProjection );
ConstructOrtho( ortho,
backEnd.viewParms.viewportX,
backEnd.viewParms.viewportX + backEnd.viewParms.viewportWidth,
backEnd.viewParms.viewportY,
backEnd.viewParms.viewportY + backEnd.viewParms.viewportHeight,
-99999, 99999 );
GFX_SetModelViewMatrix( s_identityMatrix );
GFX_SetProjectionMatrix( ortho );
for ( f = r_activeFlares ; f ; f = f->next ) {
if ( f->frameSceneNum == backEnd.viewParms.frameSceneNum
&& f->inPortal == backEnd.viewParms.isPortal
&& f->drawIntensity ) {
RB_RenderFlare( f );
}
}
GFX_SetModelViewMatrix( cachedModelView );
GFX_SetProjectionMatrix( cachedProjection );
}
