/**
* @brief This function handles RCC interrupt request.
* @param None
* @retval None
*/
void RCC_IRQHandler(void)
{
if(RCC_GetITStatus(RCC_IT_HSERDY) != RESET)
{
/* Clear HSERDY interrupt pending bit */
RCC_ClearITPendingBit(RCC_IT_HSERDY);
/* Check if the HSE clock is still available */
if (RCC_GetFlagStatus(RCC_FLAG_HSERDY) != RESET)
{
#ifdef SYSCLK_HSE
/* Select HSE as system clock source */
RCC_SYSCLKConfig(RCC_SYSCLKSource_HSE);
#else
#ifdef STM32F10X_CL
/* Enable PLL2 */
RCC_PLL2Cmd(ENABLE);
#else
/* Enable PLL: once the PLL is ready the PLLRDY interrupt is generated */
RCC_PLLCmd(ENABLE);
#endif /* STM32F10X_CL */
#endif /* SYSCLK_HSE */
}
}
#ifdef STM32F10X_CL
if(RCC_GetITStatus(RCC_IT_PLL2RDY) != RESET)
{
/* Clear PLL2RDY interrupt pending bit */
RCC_ClearITPendingBit(RCC_IT_PLL2RDY);
/* Enable PLL: once the PLL is ready the PLLRDY interrupt is generated */
RCC_PLLCmd(ENABLE);
}
#endif /* STM32F10X_CL */
if(RCC_GetITStatus(RCC_IT_PLLRDY) != RESET)
{
/* Clear PLLRDY interrupt pending bit */
RCC_ClearITPendingBit(RCC_IT_PLLRDY);
/* Check if the PLL is still locked */
if (RCC_GetFlagStatus(RCC_FLAG_PLLRDY) != RESET)
{
/* Select PLL as system clock source */
RCC_SYSCLKConfig(RCC_SYSCLKSource_PLLCLK);
}
}
}
/**
* @brief This function handles NMI exception.
* @param None
* @retval None
*/
void NMI_Handler(void)
{
/* This interrupt is generated when HSE clock fails */
if (RCC_GetITStatus(RCC_IT_CSS) != RESET)
{
/* At this stage: HSE, PLL are disabled (but no change on PLL config) and MSI
is selected as system clock source */
/* Enable HSE */
RCC_HSEConfig(RCC_HSE_ON);
/* Enable HSE Ready interrupt */
RCC_ITConfig(RCC_IT_HSERDY, ENABLE);
/* Enable PLL Ready interrupt */
RCC_ITConfig(RCC_IT_PLLRDY, ENABLE);
/* Clear Clock Security System interrupt pending bit */
RCC_ClearITPendingBit(RCC_IT_CSS);
/* Once HSE clock recover, the HSERDY interrupt is generated and in the RCC ISR
routine the system clock will be reconfigured to its previous state (before
HSE clock failure) */
}
}
/*******************************************************************************
* Function Name : NMI_Handler
* Description : This function handles NMI exception.
* Input : None
* Output : None
* Return : None
*******************************************************************************/
void NMI_Handler(void)
{
/* This interrupt is generated when HSE clock fails */
if (RCC_GetITStatus(RCC_IT_CSS) != RESET)
{
SystemCoreClockUpdate();
/* Clear Clock Security System interrupt pending bit */
RCC_ClearITPendingBit(RCC_IT_CSS);
}
}
/* Przerwanie NMI jest generowane m. in. przez system nadzoru zegara. Jeżeli zegar zewnętrzny
* padnie, wtedy można przełączyć się na zegar wewnętrzny. Niestety, aby płynnie przechodzić między
* domenami zegara bez zmiany konfiguracji peryferiów, zegar systemowy nie może być szybszy niż maks
* co się dla uzyskać PLL napędzanej z HSI, czyli 64MHz. Obsługa jest mało koszerna, gdyż trwa długo
* ale jak pada zegar, to chyba jest to mało ważne, czy obsługjemy inne przerwania, ważne, żeby
* przywrócić system do działania.
*/
void NMI_Handler(void)
{
if (RCC_GetITStatus(RCC_IT_CSS) == SET) {
RCC_HSEConfig(RCC_HSE_ON);
if (RCC_WaitForHSEStartUp() == SUCCESS) {
RCC_PLLCmd(ENABLE);
while (RCC_GetFlagStatus(RCC_FLAG_PLLRDY) == RESET);
RCC_SYSCLKConfig(RCC_SYSCLKSource_PLLCLK);
while (RCC_GetSYSCLKSource() != 0x08);
} else {
RCC_PLLConfig(RCC_PLLSource_HSI_Div2, RCC_PLLMul_16);
RCC_PLLCmd(ENABLE);
while (RCC_GetFlagStatus(RCC_FLAG_PLLRDY) == RESET);
RCC_SYSCLKConfig(RCC_SYSCLKSource_PLLCLK);
while (RCC_GetSYSCLKSource() != 0x08);
}
RCC_ClearITPendingBit(RCC_IT_CSS);
}
}
/*******************************************************************************
* Function Name : NMI_Handler
* Description : This function handles NMI exception.
* Input : None
* Output : None
* Return : None
*******************************************************************************/
void NMI_Handler(void)
{
uint32_t tmp = 318, index = 0;
/* Disable LCD Window mode */
LCD_WindowModeDisable();
/* If HSE is not detected at program startup or HSE clock failed during program execution */
if((Get_HSEStartUpStatus() == ERROR) || (RCC_GetITStatus(RCC_IT_CSS) != RESET))
{
/* Clear the LCD */
LCD_Clear(White);
/* Set the LCD Back Color */
LCD_SetBackColor(Blue);
/* Set the LCD Text Color */
LCD_SetTextColor(White);
/* Display " No Clock Detected " message */
LCD_DisplayStringLine(Line0, "No HSE Clock ");
LCD_DisplayStringLine(Line1, "Detected. STANDBY ");
LCD_DisplayStringLine(Line2, "mode in few seconds. ");
LCD_DisplayStringLine(Line5, "If HSE Clock ");
LCD_DisplayStringLine(Line6, "recovers before the ");
LCD_DisplayStringLine(Line7, "time out, a System ");
LCD_DisplayStringLine(Line8, "Reset is generated. ");
LCD_ClearLine(Line9);
/* Clear Clock Security System interrupt pending bit */
RCC_ClearITPendingBit(RCC_IT_CSS);
GPIO_SetBits(GPIOC, GPIO_Pin_6 | GPIO_Pin_7 | GPIO_Pin_8 | GPIO_Pin_9);
/* Enable HSE */
RCC_HSEConfig(RCC_HSE_ON);
LCD_ClearLine(Line4);
/* Set the Back Color */
LCD_SetBackColor(White);
/* Set the Text Color */
LCD_SetTextColor(Red);
LCD_DrawRect(71, 319, 25, 320);
LCD_SetBackColor(Green);
LCD_SetTextColor(White);
/* Wait till HSE is ready */
while(RCC_GetFlagStatus(RCC_FLAG_HSERDY) == RESET)
{
if(index == 0x3FFFF)
{
LCD_DisplayChar(Line3, tmp, 0x20);
tmp -= 16;
index = 0;
}
index++;
/* Enters the system in STANDBY mode */
if(tmp < 16)
{
LCD_SetBackColor(Blue);
LCD_ClearLine(Line3);
LCD_ClearLine(Line4);
LCD_ClearLine(Line5);
LCD_ClearLine(Line6);
LCD_DisplayStringLine(Line7, " MCU in STANDBY Mode");
LCD_DisplayStringLine(Line8, "To exit press Wakeup");
/* Request to enter STANDBY mode */
PWR_EnterSTANDBYMode();
}
}
/* Generate a system reset */
NVIC_SystemReset();
}
}
