/*!
*******************************************************************************
* Load default values from eeprom
*
* \todo EEPROM management, until now values are fix
******************************************************************************/
void load_defauls(void)
{
uint8_t i;
//! Set Time and date
RTC_SetDay (BOOT_DD);
RTC_SetMonth (BOOT_MM);
RTC_SetYear (BOOT_YY);
RTC_SetHour (BOOT_hh);
RTC_SetMinute(BOOT_mm);
RTC_SetSecond(0);
//! m_reftemps (high and low)
m_reftemp_mem[0] = DEG_2_UINT8 (BOOT_TEMP_H);
m_reftemp_mem[1] = DEG_2_UINT8 (BOOT_TEMP_L);
//! DOW times
for (i=0; i<7; i++){
RTC_DowTimerSet(i, 0, BOOT_ON1);
RTC_DowTimerSet(i, 1, BOOT_OFF1);
RTC_DowTimerSet(i, 2, BOOT_ON2);
RTC_DowTimerSet(i, 3, BOOT_OFF2);
}
//! motor speed
m_speed = full;
//! initial keystates
m_key_action = false;
m_state_keys = 0;
m_state_keys_prev = 0;
m_state_wheel = 0;
m_state_wheel_prev = 0;
//! serial number
serialNumber = 0; // Zero = Not set !
}
/*!
*******************************************************************************
* \brief menu Controller
*
* \returns true for controler restart
******************************************************************************/
bool menu_controller(bool new_state) {
int8_t wheel = wheel_proccess(); //signed number
bool ret = false;
switch (menu_state) {
case menu_startup:
if (new_state) {
menu_auto_update_timeout=2;
}
if (menu_auto_update_timeout==0) {
menu_state = menu_version;
ret=true;
}
break;
case menu_version:
if (new_state) {
menu_auto_update_timeout=2;
}
if (menu_auto_update_timeout==0) {
#if (DEBUG_SKIP_DATETIME_SETTING_AFTER_RESET) || (REMOTE_SETTING_ONLY)
menu_state = menu_home;
#else
menu_state = menu_set_year;
#endif
ret=true;
}
break;
#if (! REMOTE_SETTING_ONLY)
case menu_set_year:
if (wheel != 0) RTC_SetYear(RTC_GetYearYY()+wheel);
if ( kb_events & KB_EVENT_PROG) {
menu_state = menu_set_month;
CTL_update_temp_auto();
ret=true;
}
break;
case menu_set_month:
if (wheel != 0) RTC_SetMonth(RTC_GetMonth()+wheel);
if ( kb_events & KB_EVENT_PROG ) {
menu_state = menu_set_day;
CTL_update_temp_auto();
ret=true;
}
break;
case menu_set_day:
if (wheel != 0) RTC_SetDay(RTC_GetDay()+wheel);
if ( kb_events & KB_EVENT_PROG ) {
menu_state = menu_set_hour;
CTL_update_temp_auto();
ret=true;
}
break;
case menu_set_hour:
if (wheel != 0) RTC_SetHour(RTC_GetHour()+wheel);
if ( kb_events & KB_EVENT_PROG ) {
menu_state = menu_set_minute;
CTL_update_temp_auto();
ret=true;
}
break;
case menu_set_minute:
if (wheel != 0) {
RTC_SetMinute(RTC_GetMinute()+wheel);
RTC_SetSecond(0);
}
if ( kb_events & KB_EVENT_PROG ) {
menu_state = menu_home;
CTL_update_temp_auto();
ret=true;
}
break;
#endif
case menu_home_no_alter: // same as home screen, but without alternate contend
case menu_home: // home screen
case menu_home2: // alternate version, real temperature
case menu_home3: // alternate version, valve pos
case menu_home4: // alternate version, time
#if MENU_SHOW_BATTERY
case menu_home5: // alternate version, battery
#endif
if ( kb_events & KB_EVENT_C ) {
menu_state++; // go to next alternate home screen
#if MENU_SHOW_BATTERY
if (menu_state > menu_home5) menu_state=menu_home;
#else
if (menu_state > menu_home4) menu_state=menu_home;
#endif
ret=true;
} else {
if (menu_locked) {
if ( kb_events & (
KB_EVENT_WHEEL_PLUS | KB_EVENT_WHEEL_MINUS | KB_EVENT_PROG
| KB_EVENT_AUTO | KB_EVENT_PROG_REWOKE | KB_EVENT_C_REWOKE | KB_EVENT_AUTO_REWOKE
| KB_EVENT_PROG_LONG | KB_EVENT_C_LONG | KB_EVENT_AUTO_LONG )) {
menu_auto_update_timeout=LONG_PRESS_THLD+1;
menu_state=menu_lock;
ret=true;
}
} else { // not locked
if ((menu_state == menu_home) || (menu_state == menu_home_no_alter)) {
if (wheel != 0) {
CTL_temp_change_inc(wheel);
menu_state = menu_home_no_alter;
ret=true;
}
if ( kb_events & KB_EVENT_AUTO ) {
CTL_change_mode(CTL_CHANGE_MODE); // change mode
menu_state=menu_home_no_alter;
ret=true;
} else if ( kb_events & KB_EVENT_AUTO_REWOKE ) {
CTL_change_mode(CTL_CHANGE_MODE_REWOKE); // change mode
menu_state=menu_home_no_alter;
ret=true;
}
} else {
if ( kb_events & (
KB_EVENT_WHEEL_PLUS | KB_EVENT_WHEEL_MINUS | KB_EVENT_PROG
| KB_EVENT_AUTO | KB_EVENT_PROG_REWOKE | KB_EVENT_C_REWOKE | KB_EVENT_AUTO_REWOKE
| KB_EVENT_PROG_LONG | KB_EVENT_C_LONG | KB_EVENT_AUTO_LONG )) {
menu_state = menu_home;
ret = true;
}
}
// TODO ....
}
}
break;
#if (! REMOTE_SETTING_ONLY)
case menu_set_timmer_dow_start:
if (new_state) menu_set_dow=((config.timer_mode==1)?RTC_GetDayOfWeek():0);
menu_state = menu_set_timmer_dow;
// do not use break here
case menu_set_timmer_dow:
if (wheel != 0) menu_set_dow=(menu_set_dow+wheel+8)%8;
if ( kb_events & KB_EVENT_PROG ) {
menu_state=menu_set_timmer;
menu_set_slot=0;
config.timer_mode = (menu_set_dow>0);
eeprom_config_save((uint16_t)(&config.timer_mode)-(uint16_t)(&config)); // save value to eeprom
// update hourbar
menu_update_hourbar((config.timer_mode==1)?RTC_GetDayOfWeek():0);
ret=true;
} else if ( kb_events & KB_EVENT_AUTO ) { // exit without save
menu_state=menu_home;
ret=true;
}
break;
case menu_set_timmer:
if (new_state) {
menu_set_time= RTC_DowTimerGet(menu_set_dow, menu_set_slot, &menu_set_mode);
if (menu_set_time>24*60) menu_set_time=24*60;
}
if (wheel != 0) {
menu_set_time=((menu_set_time/10+(24*6+1)+wheel)%(24*6+1))*10;
}
if ( kb_events & KB_EVENT_C ) {
menu_set_mode=(menu_set_mode+5)%4;
} else if ( kb_events & KB_EVENT_PROG ) {
RTC_DowTimerSet(menu_set_dow, menu_set_slot, menu_set_time, menu_set_mode);
if (++menu_set_slot>=RTC_TIMERS_PER_DOW) {
if (menu_set_dow!=0) menu_set_dow=menu_set_dow%7+1;
menu_state=menu_set_timmer_dow;
}
CTL_update_temp_auto();
menu_update_hourbar((config.timer_mode==1)?RTC_GetDayOfWeek():0);
ret=true;
} else if ( kb_events & KB_EVENT_AUTO ) { // exit without save
menu_state=menu_home;
ret=true;
}
break;
#endif
#if (! REMOTE_SETTING_ONLY)
case menu_preset_temp0:
case menu_preset_temp1:
case menu_preset_temp2:
case menu_preset_temp3:
if (new_state) menu_set_temp=temperature_table[menu_state-menu_preset_temp0];
if (wheel != 0) {
menu_set_temp+=wheel;
if (menu_set_temp > TEMP_MAX+1) menu_set_temp = TEMP_MAX+1;
if (menu_set_temp < TEMP_MIN-1) menu_set_temp = TEMP_MIN-1;
}
if ( kb_events & KB_EVENT_PROG ) {
temperature_table[menu_state-menu_preset_temp0]=menu_set_temp;
eeprom_config_save(menu_state+((temperature_table-config_raw)-menu_preset_temp0));
menu_state++; // menu_preset_temp3+1 == menu_home
CTL_update_temp_auto();
ret=true;
} else if ( kb_events & KB_EVENT_AUTO ) { // exit without save
menu_state=menu_home;
ret=true;
}
break;
#endif
default:
case menu_lock: // "bloc" message
if (menu_auto_update_timeout==0) { menu_state=menu_home; ret=true; }
break;
case menu_service1: // service menu
case menu_service2:
if (kb_events & KB_EVENT_AUTO) {
menu_state=menu_home;
ret=true;
} else if (kb_events & KB_EVENT_C) {
menu_state=menu_service_watch;
ret=true;
} else if (kb_events & KB_EVENT_PROG) {
if (menu_state == menu_service2) {
eeprom_config_save(service_idx); // save current value
menu_state = menu_service1;
} else {
menu_state = menu_service2;
}
} else {
if (menu_state == menu_service1) {
// change index
service_idx = (service_idx+wheel+CONFIG_RAW_SIZE)%CONFIG_RAW_SIZE;
} else {
// change value in RAM, to save press PROG
int16_t min = (int16_t)config_min(service_idx);
int16_t max_min_1 = (int16_t)(config_max(service_idx))-min+1;
config_raw[service_idx] = (uint8_t) (
((int16_t)(config_raw[service_idx])+(int16_t)wheel-min+max_min_1)%max_min_1+min);
if (service_idx==0) LCD_Init();
}
}
break;
case menu_service_watch:
if (kb_events & KB_EVENT_AUTO) {
menu_state=menu_home;
ret=true;
} else if (kb_events & KB_EVENT_C) {
menu_state=menu_service1;
ret=true;
} else {
service_watch_n=(service_watch_n+wheel+WATCH_N)%WATCH_N;
if (wheel != 0) ret=true;
}
break;
}
if (events_common()) ret=true;
if (ret && (service_idx<CONFIG_RAW_SIZE)) {
// back config to default value
config_raw[service_idx] = config_value(service_idx);
service_idx = CONFIG_RAW_SIZE;
}
kb_events = 0; // clear unused keys
return ret;
}
int main(void)
{
RTC_STRUCT stClock;
RTC_Init(&stClock);
printf("---Default Time---\n");
RTC_PrintTime(&stClock);
// Test boundary conditions (using leap years)
// 1) Normal, non leap-year
printf("---No leap year, Feb-March rollover ---\n");
RTC_SetMonth(&stClock, MONTH_FEBRUARY);
RTC_SetDay(&stClock, 28);
RTC_SetHour(&stClock, 23);
RTC_SetMinute(&stClock, 59);
RTC_SetSecond(&stClock, 59);
RTC_PrintTime(&stClock);
RTC_AddTime(&stClock, 750);
RTC_PrintTime(&stClock);
RTC_AddTime(&stClock, 750);
RTC_PrintTime(&stClock);
// 2) Leap year, 4/year modulo
printf("---Leap year, Feb 29 test (4 yr)---\n");
RTC_SetMonth(&stClock, MONTH_FEBRUARY);
RTC_SetYear(&stClock, 2008);
RTC_SetDay(&stClock, 28);
RTC_SetHour(&stClock, 23);
RTC_SetMinute(&stClock, 59);
RTC_SetSecond(&stClock, 59);
RTC_PrintTime(&stClock);
RTC_AddTime(&stClock, 750);
RTC_PrintTime(&stClock);
RTC_AddTime(&stClock, 750);
RTC_PrintTime(&stClock);
// Verify leap-year month rollover
printf("---leap year, month rollover ---\n");
RTC_SetHour(&stClock, 23);
RTC_SetMinute(&stClock, 59);
RTC_SetSecond(&stClock, 59);
RTC_PrintTime(&stClock);
RTC_AddTime(&stClock, 750);
RTC_PrintTime(&stClock);
RTC_AddTime(&stClock, 750);
RTC_PrintTime(&stClock);
// 3) No leap year, 100/year modulo
printf("---No Leap year, rollover test (100 yr)---\n");
RTC_SetMonth(&stClock, MONTH_FEBRUARY);
RTC_SetYear(&stClock, 2100);
RTC_SetDay(&stClock, 28);
RTC_SetHour(&stClock, 23);
RTC_SetMinute(&stClock, 59);
RTC_SetSecond(&stClock, 59);
RTC_PrintTime(&stClock);
RTC_AddTime(&stClock, 750);
RTC_PrintTime(&stClock);
RTC_AddTime(&stClock, 750);
RTC_PrintTime(&stClock);
// 4) Leap year, 400/year modulo
printf("---Leap year, Feb 29 test (400 yr)---\n");
RTC_SetMonth(&stClock, MONTH_FEBRUARY);
RTC_SetYear(&stClock, 2000);
RTC_SetDay(&stClock, 28);
RTC_SetHour(&stClock, 23);
RTC_SetMinute(&stClock, 59);
RTC_SetSecond(&stClock, 59);
RTC_PrintTime(&stClock);
RTC_AddTime(&stClock, 750);
RTC_PrintTime(&stClock);
RTC_AddTime(&stClock, 750);
RTC_PrintTime(&stClock);
// 4) End of year test
printf("---End of year---\n");
RTC_SetMonth(&stClock, MONTH_DECEMBER);
RTC_SetYear(&stClock, 2009);
RTC_SetDay(&stClock, 31);
RTC_SetHour(&stClock, 23);
RTC_SetMinute(&stClock, 59);
RTC_SetSecond(&stClock, 59);
RTC_PrintTime(&stClock);
RTC_AddTime(&stClock, 750);
RTC_PrintTime(&stClock);
RTC_AddTime(&stClock, 750);
RTC_PrintTime(&stClock);
return 0;
}
