C++ (Cpp) RdURXH0 Examples

Example #1

File: Uart0.c Project: Sudoka/CSED211-Micro

void __sub_Uart0_RxInt(void)
{
    if(RdURXH0()!='\r') 
    {
    	Uart_Printf("%c",RdURXH0());
    	*uart0RxStr++ =(char)RdURXH0();
    }
    else
    {
    	isRxInt=0;
    	*uart0RxStr='\0';
    	Uart_Printf("\n");
    }
}

Example #2

File: system.c Project: uKingSky/KingSky

//====================================================================
char Uart_GetKey(void)
{
    if(whichUart==0)
    {       
        if(rUTRSTAT0 & 0x1)    //Receive data ready
            return RdURXH0();
        else
            return 0;
    }
    else if(whichUart==1)
    {
        if(rUTRSTAT1 & 0x1)    //Receive data ready
            return RdURXH1();
        else
            return 0;
    }
    else if(whichUart==2)
    {       
        if(rUTRSTAT2 & 0x1)    //Receive data ready
            return RdURXH2();
        else
            return 0;
    }
    return 0;    
}

Example #3

File: comload.c Project: ceeback/FriendlyARM_DemoCode

static void __irq Uart0RxInt(void)
{
    ClearSubPending(BIT_SUB_RXD0); //rSUBSRCPND = BIT_SUB_RXD0;          //Clear pending bit (Requested)
    ClearPending(BIT_UART0);

    *temp ++= RdURXH0();
}

Example #4

File: board.c Project: MenglongWu/HackerFPGA

int peekchar(void)
{
    if(rUTRSTAT0 & 0x1) {
        return RdURXH0();
    }
    return 0;
}

Example #5

File: Uart.c Project: woorlds/stopwatch

char Uart_Get_Char()
{
	while(!(rUTRSTAT0 & 0x1));
	return RdURXH0();	
	//return *(volatile unsigned char *)URXH0;
	 
}

Example #6

File: Uart0.c Project: Sudoka/CSED211-Micro

void __sub_Uart0_RxFifo(void)
{
    while((rUFSTAT0&0x100)||(rUFSTAT0&0xf))	//During the Rx FIFO is not empty
    {
	rx_point++;
	if(rx_point<5)
		rx_filesize |= (RdURXH0()<<(8*(rx_point-1))); // First 4-bytes mean file size
	else if(rx_point>(rx_filesize-2))	
	{
		rx_dncs |= (RdURXH0()<<(8*(1-(rx_filesize-rx_point)))); //Last 2-bytes mean checksum.
		if(rx_point==rx_filesize) rx_isdone=0;
	}
	else
		rx_checksum+=RdURXH0();
    }
}

Example #7

File: Uart.c Project: woorlds/stopwatch

char Uart_Get_Pressed(void)
{
    if(rUTRSTAT0 & 0x1)
    {
    	return RdURXH0();
    }
    else return 0;
}

Example #8

File: uart.c Project: wynro/proyecto-hardware

void Uart0_RxInt(void)
{
    
    keyBuf[keyBufWrPt++]=RdURXH0(); // leer byte e insertar en el buffer
     
    if(keyBufWrPt==KEY_BUFLEN) 		// mantener comportamiento circular 
		keyBufWrPt=0;
	
	rI_ISPC=BIT_URXD0;		        // finalizar interrupción
}

Example #9

File: 44blib.c Project: wynro/proyecto-hardware

char Uart_Getch(void)
{
    if(whichUart==0)
    {	    
		while(!(rUTRSTAT0 & 0x1)); //Receive data read
		return RdURXH0();
    }
    else
    {
		while(!(rUTRSTAT1 & 0x1)); //Receive data ready
		return	rURXH1;
    }
}

Example #10

File: uart.c Project: wynro/proyecto-hardware

char Uart_Getch(void)
{

#ifdef UART_INT 
    if (keyBufRdPt == KEY_BUFLEN)      // buffer circular
	   keyBufRdPt=0;

    while (keyBufWrPt == keyBufRdPt);  // esperar a que haya caracteres nuevos
    return keyBuf[keyBufRdPt++];	   // devolver el caracter
#else
    while (!(rUTRSTAT0 & 0x1));        // esperar a que el buffer contenga datos
	return RdURXH0();		   		   // devolver el caracter  
#endif
}

Example #11

File: uart.c Project: darkspr1te/qt2410bootloader

// UART0 RX isr
void UART0_RX_ISR(void)
{
    //if (!(rUTRSTAT0 & USTAT_ERROR)) // if error
    //{
        if (RxQQ.wptr + 1 != RxQQ.rptr)   // enough space of buffer?
        {
            RxQQ.buff[RxQQ.wptr++] = RdURXH0(); // read from urxh0

            if(RxQQ.wptr == QMAXSIZE)    // verify ptr
            {
                RxQQ.wptr = 0; /*loop back*/
            }
        }
    //}
    //printf("read int\n");
}

Example #12

File: 44blib.c Project: wynro/proyecto-hardware

char Uart_GetKey(void)
{
    if(whichUart==0)
    {	    
		if(rUTRSTAT0 & 0x1)    //Receive data ready
    	    return RdURXH0();
		else
		    return 0;
    }
    else
    {
		if(rUTRSTAT1 & 0x1)    //Receive data ready
		    return rURXH1;
		else
		    return 0;
    }
}

Example #13

File: system.c Project: uKingSky/KingSky

//=====================================================================
char Uart_Getch(void)
{
    if(whichUart==0)
    {       
        while(!(rUTRSTAT0 & 0x1)); //Receive data ready
        return RdURXH0();
    }
    else if(whichUart==1)
    {       
        while(!(rUTRSTAT1 & 0x1)); //Receive data ready
        return RdURXH1();
    }
    else if(whichUart==2)
    {
        while(!(rUTRSTAT2 & 0x1)); //Receive data ready
        return RdURXH2();
    }
    return 0;
}

Example #14

File: board.c Project: MenglongWu/HackerFPGA

int getchar(void)
//int usart_getc(void)
{
	while(!(rUTRSTAT0 & 0x1)); //Receive data ready
	return RdURXH0();
}

Example #15

File: uart.c Project: JorgeKsas/Proyecto_Snake_SED

char Uart0_Getch(void)
{
    while (!(rUTRSTAT0 & 0x1));        // esperar a que el buffer contenga datos
	return RdURXH0();		   		   // devolver el caracter
}

Example #16

File: con_uart.c Project: ChenZewei/acoral

void uart_read(acoral_char *ch){
	while(!(rUTRSTAT0 & 0x1));
	*ch=RdURXH0();
}