NTSTATUS
CompareProductName(
IN HANDLE hSubKey,
IN LPWSTR PnpName,
IN ULONG ProductNameSize,
OUT LPWSTR ProductName)
{
PKEY_VALUE_PARTIAL_INFORMATION PartialInformation;
UNICODE_STRING DriverDescName = RTL_CONSTANT_STRING(L"DriverDesc");
UNICODE_STRING MatchingDeviceIdName = RTL_CONSTANT_STRING(L"MatchingDeviceId");
ULONG Length;
LPWSTR DeviceName;
/* read MatchingDeviceId value */
PartialInformation = ReadKeyValue(hSubKey, &MatchingDeviceIdName);
if (!PartialInformation)
return STATUS_UNSUCCESSFUL;
/* extract last '&' */
DeviceName = wcsrchr((LPWSTR)PartialInformation->Data, L'&');
ASSERT(DeviceName);
/* terminate it */
DeviceName[0] = L'\0';
Length = wcslen((LPWSTR)PartialInformation->Data);
DPRINT("DeviceName %S PnpName %S Length %u\n", (LPWSTR)PartialInformation->Data, PnpName, Length);
if (_wcsnicmp((LPWSTR)PartialInformation->Data, &PnpName[4], Length))
{
FreeItem(PartialInformation);
return STATUS_NO_MATCH;
}
/* free buffer */
FreeItem(PartialInformation);
/* read DriverDescName value */
PartialInformation = ReadKeyValue(hSubKey, &DriverDescName);
if (!PartialInformation)
{
/* failed to read driver desc key */
return STATUS_UNSUCCESSFUL;
}
/* copy key name */
Length = min(ProductNameSize * sizeof(WCHAR), PartialInformation->DataLength);
RtlMoveMemory(ProductName, (PVOID)PartialInformation->Data, Length);
/* zero terminate it */
ProductName[ProductNameSize-1] = L'\0';
/* free buffer */
FreeItem(PartialInformation);
return STATUS_SUCCESS;
}
/*******************************************************************************
* Function Name : KEY_Handle
* Description : Key processing function
* Input : None
* Output : None
* Return : None
* Attention : None
*******************************************************************************/
void KEY_Handle(void)
{
uint8_t Key_return =0;
Key_return = ReadKeyValue();
if(Key_return & KEY_UP)
{
if(Key_return & PRESS_KEY1)
{
printf("KEY1 PRESS\r\n");
LED_RGB_Control(0,0,10);
Motor_status(0);
}
if(Key_return & PRESS_KEY2)
{
printf("KEY2 PRESS\r\n");
LED_RGB_Control(0,10,0);
Motor_status(10);
}
if(Key_return & PRESS_KEY3)
{
printf("KEY3 PRESS\r\n");
LED_RGB_Control(10,0,00);
//DHT11_Read_Data(&Device_ReadStruct.Temperature, &Device_ReadStruct.Humidity);
//printf("Temperature =%d;Humidity = %d " ,Device_ReadStruct.Temperature,Device_ReadStruct.Humidity);
Motor_status(5);
}
}
if(Key_return & KEY_LONG)
{
if(Key_return & PRESS_KEY1)
{
KEY_LongHandle(PRESS_KEY1);
printf("KEY1 Long PRESS\r\n");
printf("M2W RESET WIFI\r\n");
}
if(Key_return & PRESS_KEY2)
{
KEY_LongHandle(PRESS_KEY2);
printf("KEY2 Long PRESS\r\n");
printf("M2W Config WIFI\r\n");
}
if(Key_return & PRESS_KEY3)
{
printf("KEY3 Long PRESS\r\n");
}
}
}
/*********************************************************************************************************
** Function name: acdc_manage
** Creater By : yoc 2014.05.07
** Descriptions: 展示灯压缩机管理操作页面
** input parameters: type 1压缩机 2展示灯3加热 4除臭
** output parameters: 无
** Returned value:
*********************************************************************************************************/
void acdc_manage(const unsigned char type)
{
unsigned char topFlush = 1,topReturn = 0,changed = 0;
unsigned char key,lang,cabinetNO = 1,flag,rst;
char *acdcTitleStr;
DEVICECONTROLTIME *stDevPtr;
lang= SystemPara.Language;
while(SystemPara.SubBinOpen || SystemPara.hefangGui)
{
if(topFlush)
{
topFlush = 0;
LCDClrScreen();
LCDDrawRectangle(0,0,239,15);
LCDDrawRectangle(0,0,239,3);
LCDClrArea(1,4,238,14);
LCDPrintf(8,1,0,lang," %s",ui_acdc_man.manage[lang]);
LCDPrintf(8,5,0,lang," %s",ui_aisle_admin.enternCabinetNo[lang]);
LCDPrintf(8,7,0,lang," %s%s",ui_aisle_admin.no_1[lang],ui_aisle_admin.A_Bin[lang]);
if(SystemPara.SubBinOpen && SystemPara.hefangGui)
{
LCDPrintf(8,9,0,lang," %s%s",ui_aisle_admin.no_2[lang],ui_aisle_admin.B_Bin[lang]);
LCDPrintf(8,11,0,lang," %s%s",ui_aisle_admin.no_3[lang],ui_aisle_admin.hefan[lang]);
}
else if(SystemPara.SubBinOpen)
LCDPrintf(8,9,0,lang," %s%s",ui_aisle_admin.no_2[lang],ui_aisle_admin.B_Bin[lang]);
else if(SystemPara.hefangGui)
LCDPrintf(8,9,0,lang," %s%s",ui_aisle_admin.no_2[lang],ui_aisle_admin.hefan[lang]);
}
key = ReadKeyValue();
OSTimeDly(5);
if(key == '1')
{
cabinetNO = 1;
break;
}
else if(key == '2')
{
if(SystemPara.SubBinOpen)
{
cabinetNO = 2;
break;
}
else if(SystemPara.hefangGui)
return;
topFlush = 1;
}
else if(key == '3')
{
if(SystemPara.hefangGui)
return;
topFlush = 1;
}
else if(key == 'C')
return;
}
if(cabinetNO == 1)
{
if(type == 1)//压缩机
{
acdcTitleStr = ui_acdc_man.cprtManage[lang];
stDevPtr = &UserPara.CompressorCtr;
}
else if(type == 2)//展示灯
{
acdcTitleStr = ui_acdc_man.lightManage[lang];
stDevPtr = &UserPara.LEDCtr;
}
else if(type == 4)//除臭
{
acdcTitleStr = ui_acdc_man.chuchouManage[lang];
stDevPtr = &UserPara.box1Chuchou;
}
else
return;
}
else if(cabinetNO == 2)
{
if(type == 1)
{
acdcTitleStr = ui_acdc_man.cprtManage[lang];
stDevPtr = &UserPara.CompressorCtr2Bin;
}
else if(type == 2)
{
acdcTitleStr = ui_acdc_man.lightManage[lang];
stDevPtr = &UserPara.LEDCtr2Bin;
}
else if(type == 4)//除臭
{
acdcTitleStr = ui_acdc_man.chuchouManage[lang];
stDevPtr = &UserPara.box2Chuchou;
}
else
return;
}
else
{
return;
}
topFlush = 1;
while(1)
{
if(topFlush)
{
topFlush = 0;
LCDClrScreen();
LCDDrawRectangle(0,0,239,15);
LCDDrawRectangle(0,0,239,3);
LCDClrArea(1,4,238,14);
if(stDevPtr->flag & (0x01 << 1))
LCDPrintf(8,1,0,lang,"%s %s",acdcTitleStr,ui_acdc_man.timerStarting[lang]);
else if(stDevPtr->flag & 0x01)
LCDPrintf(8,1,0,lang,"%s %s",acdcTitleStr,ui_aisle_admin.open[lang]);
else
LCDPrintf(8,1,0,lang,"%s %s",acdcTitleStr,ui_aisle_admin.close[lang]);
LCDPrintf(8,5,0,lang,"%s %s",ui_aisle_admin.no_1[lang],ui_aisle_admin.open[lang]);
LCDPrintf(8,7,0,lang,"%s %s",ui_aisle_admin.no_2[lang],ui_aisle_admin.close[lang]);
LCDPrintf(8,9,0,lang,"%s %s",ui_aisle_admin.no_3[lang],ui_acdc_man.timerManage[lang]);
}
if(topReturn)
return;
key = ReadKeyValue();
OSTimeDly(5);
switch(key)
{
case '1':
case '2':
flag = (key == '1') ? 1 : 0;
TraceCompress("acdc man type = %d %d\r\n",type,stDevPtr->flag);
LCDPrintf(8,1,0,lang,"%s %s",acdcTitleStr,ui_acdc_man.operating[lang]);
OSTimeDly(100);
if(type == 4)
rst = acdc_chuchou_API(cabinetNO,flag & 0x01);
else
{
stDevPtr->flag = flag;
if(cabinetNO == 1)
rst = acdc_handle_API(1,UserPara.LEDCtr.flag & 0x01,UserPara.CompressorCtr.flag & 0x01);
else
rst = acdc_handle_API(2,UserPara.LEDCtr2Bin.flag & 0x01,UserPara.CompressorCtr2Bin.flag & 0x01);
}
if(rst)
{
stDevPtr->flag = flag;
LCDPrintf(8,1,0,lang,"%s %s",acdcTitleStr,ui_acdc_man.operateSuc[lang]);
}
else
LCDPrintf(8,1,0,lang,"%s %s",acdcTitleStr,ui_acdc_man.operateFail[lang]);
OSTimeDly(200);
topFlush = 1;
break;
case '3':
changed = acdc_timerHandlePage(cabinetNO,type);
if(changed == 1)
{
chuchouFlush = 1;
}
topFlush = 1;
break;
case 'C':
topReturn = 1;
break;
case 'E':
topReturn = 1;
break;
default:
break;
}
}
}
/*********************************************************************************************************
** Function name: acdc_timerHandlePage
** Creater By : yoc 2014.05.07
** Descriptions: 压缩机和展示灯定时操作页面
** input parameters: cabinet 柜号type 1压缩机 2展示灯3 加热 4除臭
** output parameters: 无
** Returned value:
*********************************************************************************************************/
unsigned char acdc_timerHandlePage(unsigned char cabinet,unsigned char type)
{
unsigned char topFlushFlag = 1,topReturnFlag = 0,enterSub = 0,subFlushFlag = 0;
unsigned char lang,key,tempState,changed = 0;
unsigned char cursorIndex = 0;
char buf[4] = {' '},dis_buf[4];
DEVICECONTROLTIME *stDevPtr;
if(cabinet == 1)
{
if(type == 1)
stDevPtr = &UserPara.CompressorCtr;
else if(type == 2)//展示灯
stDevPtr = &UserPara.LEDCtr;
else if(type == 4)//除臭
stDevPtr = &UserPara.box1Chuchou;
else
return changed;
}
else
{
if(type == 1)
stDevPtr = &UserPara.CompressorCtr2Bin;
else if(type == 2)//展示灯
stDevPtr = &UserPara.LEDCtr2Bin;
else if(type == 4)//除臭
stDevPtr = &UserPara.box2Chuchou;
else
return changed;
}
lang = SystemPara.Language;
while(1)
{
if(topFlushFlag)
{
topFlushFlag = 0;
LCDClrScreen();
LCDDrawRectangle(0,0,239,15);
LCDDrawRectangle(0,0,239,3);
LCDClrArea(1,4,238,14);
if(stDevPtr->flag & 0x02)
LCDPrintf(8,1,0,lang,"%s %s",ui_acdc_man.timerManage[lang],ui_aisle_admin.open[lang]);
else
LCDPrintf(8,1,0,lang,"%s %s",ui_acdc_man.timerManage[lang],ui_aisle_admin.close[lang]);
LCDPrintf(8,5,0,lang,"%s %s",ui_aisle_admin.no_1[lang],ui_aisle_admin.open[lang]);
LCDPrintf(8,7,0,lang,"%s %s",ui_aisle_admin.no_2[lang],ui_aisle_admin.close[lang]);
if(stDevPtr->flag & 0x02)
{
LCDPrintf(8,9,0,lang,"%s %s %02d:%02d",ui_aisle_admin.no_3[lang],ui_acdc_man.startTime[lang],
stDevPtr->HourOn,
stDevPtr->MinOn);
LCDPrintf(8,11,0,lang,"%s %s %02d:%02d",ui_aisle_admin.no_4[lang],ui_acdc_man.stopTime[lang],
stDevPtr->HourOff,
stDevPtr->MinOff);
}
}
if(topReturnFlag)
{
return changed;
}
key = ReadKeyValue();
OSTimeDly(5);
switch(key)
{
case '1':
case '2':
tempState = (key == '1')? 1 : 0;
stDevPtr->flag = (tempState << 1);
topFlushFlag = 1;
break;
case '3':
if(stDevPtr->flag & 0x02)
{
subFlushFlag = 1;
enterSub = 1;
cursorIndex = 0;
buf[0] = stDevPtr->HourOn / 10 + '0';
buf[1] = stDevPtr->HourOn % 10 + '0';
buf[2] = stDevPtr->MinOn / 10 + '0';
buf[3] = stDevPtr->MinOn % 10 + '0';
}
break;
case '4':
if(stDevPtr->flag & 0x02)
{
subFlushFlag = 1;
enterSub = 3;
cursorIndex = 0;
buf[0] = stDevPtr->HourOff / 10 + '0';
buf[1] = stDevPtr->HourOff % 10 + '0';
buf[2] = stDevPtr->MinOff / 10 + '0';
buf[3] = stDevPtr->MinOff % 10 + '0';
}
break;
case 'C':
enterSub = 0;
topReturnFlag = 1;
break;
default:
break;
}
while(enterSub)//编辑界面
{
if(subFlushFlag)
{
subFlushFlag = 0;
dis_buf[0] = (cursorIndex == 0) ? '-': buf[0];
dis_buf[1] = (cursorIndex == 1) ? '-': buf[1];
dis_buf[2] = (cursorIndex == 2) ? '-': buf[2];
dis_buf[3] = (cursorIndex == 3) ? '-': buf[3];
{
if(enterSub < 3)
{
LCDPrintf(8,9,1,lang,"%s %s %c%c:%c%c",ui_aisle_admin.no_3[lang],ui_acdc_man.startTime[lang],
dis_buf[0],dis_buf[1],dis_buf[2],dis_buf[3]);
}
else
LCDPrintf(8,11,1,lang,"%s %s %c%c:%c%c",ui_aisle_admin.no_4[lang],ui_acdc_man.stopTime[lang],
dis_buf[0],dis_buf[1],dis_buf[2],dis_buf[3]);
}
}
key = ReadKeyValue();
OSTimeDly(5);
switch(key)
{
case '1':
case '2':
case '3':
case '4':
case '5':
case '6':
case '7':
case '8':
case '9':
case '0':
if(cursorIndex == 0 && (key - '0') >= 3)
break;
if(cursorIndex == 1 && (buf[0] == '2') && ((key - '0') >= 4))
break;
if(cursorIndex == 2 && (key - '0') >= 6)
break;
buf[cursorIndex] = key;
if(cursorIndex == 3)
{
if(enterSub < 3)
{
stDevPtr->HourOn = (buf[0] - '0') * 10 + (buf[1] - '0');
stDevPtr->MinOn = (buf[2] - '0') * 10 + (buf[3] - '0');
}
else
{
stDevPtr->HourOff = (buf[0] - '0') * 10 + (buf[1] - '0');
stDevPtr->MinOff = (buf[2] - '0') * 10 + (buf[3] - '0');
}
enterSub = 0;
topFlushFlag = 1;
break;
}
cursorIndex = (++cursorIndex) % 4;
subFlushFlag = 1;
break;
case '>':
cursorIndex = (++cursorIndex) % 4;
break;
case '<':
cursorIndex = (cursorIndex) ? (--cursorIndex): 3;
break;
case 'C':
enterSub = 0;
topFlushFlag = 1;
break;
case 'E'://确定编辑
if(enterSub < 3)
{
stDevPtr->HourOn = (buf[0] - '0') * 10 + (buf[1] - '0');
stDevPtr->MinOn = (buf[2] - '0') * 10 + (buf[3] - '0');
}
else
{
stDevPtr->HourOff = (buf[0] - '0') * 10 + (buf[1] - '0');
stDevPtr->MinOff = (buf[2] - '0') * 10 + (buf[3] - '0');
}
acdc_chuchou_API(cabinet,stDevPtr->flag & 0x01);
enterSub = 0;
topFlushFlag = 1;
changed = 1;
break;
}
}
}
}
void acdc_hotTimerHandlePage(unsigned char cabinet)
{
unsigned char topFlushFlag = 1,topReturnFlag = 0;
unsigned char lang,key;
ST_HOT_DEV *hotPtr;
if(cabinet == 1)
{
hotPtr = &UserPara.box1Hot;
}
else if(cabinet == 2)
{
hotPtr = &UserPara.box2Hot;
}
else
return;
lang = SystemPara.Language;
#if 1
while(1)
{
if(topFlushFlag)
{
topFlushFlag = 0;
LCDClrScreen();
LCDDrawRectangle(0,0,239,15);
LCDDrawRectangle(0,0,239,3);
LCDClrArea(1,4,238,14);
LCDPrintf(8,1,0,lang,"%s",ui_acdc_man.timerManage[lang]);
if(hotPtr->flag & (0x01 << 2))
LCDPrintf(8,5,0,lang,"%s %s1:%s",ui_aisle_admin.no_1[lang],
ui_acdc_man.durTime[lang],ui_aisle_admin.open[lang]);
else
LCDPrintf(8,5,0,lang,"%s %s1:%s",ui_aisle_admin.no_1[lang],
ui_acdc_man.durTime[lang],ui_aisle_admin.close[lang]);
if(hotPtr->flag & (0x01 << 3))
LCDPrintf(8,7,0,lang,"%s %s2:%s",ui_aisle_admin.no_2[lang],
ui_acdc_man.durTime[lang],ui_aisle_admin.open[lang]);
else
LCDPrintf(8,7,0,lang,"%s %s2:%s",ui_aisle_admin.no_2[lang],
ui_acdc_man.durTime[lang],ui_aisle_admin.close[lang]);
if(hotPtr->flag & (0x01 << 4))
LCDPrintf(8,9,0,lang,"%s %s3:%s",ui_aisle_admin.no_3[lang],
ui_acdc_man.durTime[lang],ui_aisle_admin.open[lang]);
else
LCDPrintf(8,9,0,lang,"%s %s3:%s",ui_aisle_admin.no_3[lang],
ui_acdc_man.durTime[lang],ui_aisle_admin.close[lang]);
if(hotPtr->flag & (0x01 << 5))
LCDPrintf(8,11,0,lang,"%s %s4:%s",ui_aisle_admin.no_4[lang],
ui_acdc_man.durTime[lang],ui_aisle_admin.open[lang]);
else
LCDPrintf(8,11,0,lang,"%s %s4:%s",ui_aisle_admin.no_4[lang],
ui_acdc_man.durTime[lang],ui_aisle_admin.close[lang]);
if(hotPtr->flag & (0x01 << 6))
LCDPrintf(8,13,0,lang,"%s %s5:%s",ui_aisle_admin.no_5[lang],
ui_acdc_man.durTime[lang],ui_aisle_admin.open[lang]);
else
LCDPrintf(8,13,0,lang,"%s %s5:%s",ui_aisle_admin.no_5[lang],
ui_acdc_man.durTime[lang],ui_aisle_admin.close[lang]);
}
if(topReturnFlag)
{
return ;
}
key = ReadKeyValue();
OSTimeDly(5);
switch(key)
{
case '1':
case '2':
case '3':
case '4':
case '5':
acdc_hotTimerSetPage(cabinet,(key - '0'));
if((hotPtr->flag & 0x7C) || (hotPtr->flag & 0x01) )
{
hotPtr->flag |= 0x02;
}
else
hotPtr->flag &= ~0x02;
tempFlush = 1;
topFlushFlag = 1;
break;
case 'C':
topReturnFlag = 1;
break;
default:
break;
}
}
#endif
}
void acdc_hotTimerSetPage(unsigned char cabinet,const unsigned char no)
{
unsigned char topFlushFlag = 1,topReturnFlag = 0,enterSub = 0,subFlushFlag = 0;
unsigned char lang,key;
unsigned char cursorIndex = 0;
char buf[4] = {' '},dis_buf[4];
unsigned short temp = 0;
ST_HOT_DEV *stDevPtr;
if(cabinet == 1)
{
stDevPtr = &UserPara.box1Hot;
}
else if(cabinet == 2)
{
stDevPtr = &UserPara.box2Hot;
}
else
return;
lang = SystemPara.Language;
while(1)
{
if(topFlushFlag)
{
topFlushFlag = 0;
LCDClrScreen();
LCDDrawRectangle(0,0,239,15);
LCDDrawRectangle(0,0,239,3);
LCDClrArea(1,4,238,14);
if(stDevPtr->flag & (0x01 << (no + 1)))
LCDPrintf(8,1,0,lang,"%s %s",ui_acdc_man.timerManage[lang],ui_aisle_admin.open[lang]);
else
LCDPrintf(8,1,0,lang,"%s %s",ui_acdc_man.timerManage[lang],ui_aisle_admin.close[lang]);
LCDPrintf(8,5,0,lang,"%s %s",ui_aisle_admin.no_1[lang],ui_aisle_admin.open[lang]);
LCDPrintf(8,7,0,lang,"%s %s",ui_aisle_admin.no_2[lang],ui_aisle_admin.close[lang]);
if(stDevPtr->flag & (0x01 << (no + 1)))
{
LCDPrintf(8,9,0,lang,"%s %s %02d:%02d",ui_aisle_admin.no_3[lang],ui_acdc_man.startTime[lang],
stDevPtr->HourOn[no - 1],stDevPtr->MinOn[no - 1]);
LCDPrintf(8,11,0,lang,"%s %s %02d:%02d",ui_aisle_admin.no_4[lang],ui_acdc_man.stopTime[lang],
stDevPtr->HourOff[no - 1],stDevPtr->MinOff[no - 1]);
LCDPrintf(8,13,0,lang,"%s %s: %02d.%02d ℃",ui_aisle_admin.no_5[lang],ui_acdc_man.setTemp[lang],
stDevPtr->setTemp[no - 1] / 10,(stDevPtr->setTemp[no - 1] % 10) * 10);
}
}
if(topReturnFlag)
{
return ;
}
key = ReadKeyValue();
OSTimeDly(5);
switch(key)
{
case '1':
stDevPtr->flag |= (0x01 << (no + 1));
topFlushFlag = 1;
break;
case '2':
stDevPtr->flag &= ~(0x01 << (no + 1));
topFlushFlag = 1;
break;
case '3':
if(!(stDevPtr->flag & (0x01 << (no + 1))))
break;
subFlushFlag = 1;
enterSub = 1;
cursorIndex = 0;
buf[0] = stDevPtr->HourOn[no - 1] / 10 + '0';
buf[1] = stDevPtr->HourOn[no - 1] % 10 + '0';
buf[2] = stDevPtr->MinOn[no - 1] / 10 + '0';
buf[3] = stDevPtr->MinOn[no - 1] % 10 + '0';
break;
case '4':
if(!(stDevPtr->flag & (0x01 << (no + 1))))
break;
subFlushFlag = 1;
enterSub = 3;
cursorIndex = 0;
buf[0] = stDevPtr->HourOff[no - 1] / 10 + '0';
buf[1] = stDevPtr->HourOff[no - 1] % 10 + '0';
buf[2] = stDevPtr->MinOff[no - 1] / 10 + '0';
buf[3] = stDevPtr->MinOff[no - 1] % 10 + '0';
break;
case '5'://设置温度
if(!(stDevPtr->flag & (0x01 << (no + 1))))
break;
temp = 0;
subFlushFlag = 1;
enterSub = 1;
while(enterSub)
{
if(subFlushFlag)
{
subFlushFlag = 0;
LCDPrintf(8,13,1,lang,"%s %s: %02d.%02d ℃",ui_aisle_admin.no_5[lang],ui_acdc_man.setTemp[lang],
temp / 10,(temp % 10) * 10);
}
key = ReadKeyValue();
OSTimeDly(5);
switch(key)
{
case '1':
case '2':
case '3':
case '4':
case '5':
case '6':
case '7':
case '8':
case '9':
case '0':
temp = temp * 10 + (key - '0');
subFlushFlag = 1;
break;
case 'C':
enterSub = 0;
topFlushFlag = 1;
break;
case 'E'://确定编辑
stDevPtr->setTemp[no - 1] = ((temp >= ACDC_MAX_HOT_TEMP) ?ACDC_MAX_HOT_TEMP : temp);
TraceCompress("temp: %d %d\r\n",stDevPtr->setTemp[no - 1],temp);
enterSub = 0;
topFlushFlag = 1;
break;
default:
break;
}
}
break;
case 'C':
enterSub = 0;
topReturnFlag = 1;
break;
default:
break;
}
while(enterSub)//编辑界面
{
if(subFlushFlag)
{
subFlushFlag = 0;
dis_buf[0] = (cursorIndex == 0) ? '-': buf[0];
dis_buf[1] = (cursorIndex == 1) ? '-': buf[1];
dis_buf[2] = (cursorIndex == 2) ? '-': buf[2];
dis_buf[3] = (cursorIndex == 3) ? '-': buf[3];
{
if(enterSub < 3)
{
LCDPrintf(8,9,1,lang,"%s %s %c%c:%c%c",ui_aisle_admin.no_3[lang],ui_acdc_man.startTime[lang],
dis_buf[0],dis_buf[1],dis_buf[2],dis_buf[3]);
}
else
LCDPrintf(8,11,1,lang,"%s %s %c%c:%c%c",ui_aisle_admin.no_4[lang],ui_acdc_man.stopTime[lang],
dis_buf[0],dis_buf[1],dis_buf[2],dis_buf[3]);
}
}
key = ReadKeyValue();
OSTimeDly(5);
switch(key)
{
case '1':
case '2':
case '3':
case '4':
case '5':
case '6':
case '7':
case '8':
case '9':
case '0':
if(cursorIndex == 0 && (key - '0') >= 3)
break;
if(cursorIndex == 1 && (buf[0] == '2') && ((key - '0') >= 4))
break;
if(cursorIndex == 2 && (key - '0') >= 6)
break;
buf[cursorIndex] = key;
if(cursorIndex == 3)
{
if(enterSub < 3)
{
stDevPtr->HourOn[no - 1] = (buf[0] - '0') * 10 + (buf[1] - '0');
stDevPtr->MinOn[no - 1] = (buf[2] - '0') * 10 + (buf[3] - '0');
}
else
{
stDevPtr->HourOff[no - 1] = (buf[0] - '0') * 10 + (buf[1] - '0');
stDevPtr->MinOff[no - 1] = (buf[2] - '0') * 10 + (buf[3] - '0');
}
enterSub = 0;
topFlushFlag = 1;
break;
}
cursorIndex = (++cursorIndex) % 4;
subFlushFlag = 1;
break;
case '>':
cursorIndex = (++cursorIndex) % 4;
break;
case '<':
cursorIndex = (cursorIndex) ? (--cursorIndex): 3;
break;
case 'C':
enterSub = 0;
topFlushFlag = 1;
break;
case 'E'://确定编辑
if(enterSub < 3)
{
stDevPtr->HourOn[no - 1] = (buf[0] - '0') * 10 + (buf[1] - '0');
stDevPtr->MinOn[no - 1] = (buf[2] - '0') * 10 + (buf[3] - '0');
}
else
{
stDevPtr->HourOff[no - 1] = (buf[0] - '0') * 10 + (buf[1] - '0');
stDevPtr->MinOff[no - 1] = (buf[2] - '0') * 10 + (buf[3] - '0');
}
enterSub = 0;
topFlushFlag = 1;
break;
}
}
}
}
//加热界面
void acdc_controlHot(void)
{
unsigned char topFlush = 1,topReturn = 0,enterSub = 0;
unsigned char key,lang,cabinetNO = 1,flag,rst;
char *acdcTitleStr;
unsigned short temp;
ST_HOT_DEV *stDevPtr;
lang= SystemPara.Language;
while(SystemPara.SubBinOpen || SystemPara.hefangGui)
{
if(topFlush)
{
topFlush = 0;
LCDClrScreen();
LCDDrawRectangle(0,0,239,15);
LCDDrawRectangle(0,0,239,3);
LCDClrArea(1,4,238,14);
LCDPrintf(8,1,0,lang," %s",ui_acdc_man.manage[lang]);
LCDPrintf(8,5,0,lang," %s",ui_aisle_admin.enternCabinetNo[lang]);
LCDPrintf(8,7,0,lang," %s%s",ui_aisle_admin.no_1[lang],ui_aisle_admin.A_Bin[lang]);
if(SystemPara.SubBinOpen && SystemPara.hefangGui)
{
LCDPrintf(8,9,0,lang," %s%s",ui_aisle_admin.no_2[lang],ui_aisle_admin.B_Bin[lang]);
LCDPrintf(8,11,0,lang," %s%s",ui_aisle_admin.no_3[lang],ui_aisle_admin.hefan[lang]);
}
else if(SystemPara.SubBinOpen)
LCDPrintf(8,9,0,lang," %s%s",ui_aisle_admin.no_2[lang],ui_aisle_admin.B_Bin[lang]);
else if(SystemPara.hefangGui)
LCDPrintf(8,9,0,lang," %s%s",ui_aisle_admin.no_2[lang],ui_aisle_admin.hefan[lang]);
}
key = ReadKeyValue();
OSTimeDly(5);
if(key == '1')
{
cabinetNO = 1;
break;
}
else if(key == '2')
{
if(SystemPara.SubBinOpen)
{
cabinetNO = 2;
break;
}
else if(SystemPara.hefangGui)
return;
topFlush = 1;
}
else if(key == '3')
{
if(SystemPara.hefangGui)
return;
topFlush = 1;
}
else if(key == 'C')
return;
}
if(cabinetNO == 1)
{
acdcTitleStr = ui_acdc_man.hotManage[lang];
stDevPtr = &UserPara.box1Hot;
}
else if(cabinetNO == 2)
{
acdcTitleStr = ui_acdc_man.hotManage[lang];
stDevPtr = &UserPara.box2Hot;
}
else
{
return;
}
topFlush = 1;
while(1)
{
if(topFlush)
{
stDevPtr->curTemp = acdc_getTemp_API(cabinetNO);
topFlush = 0;
LCDClrScreen();
LCDDrawRectangle(0,0,239,15);
LCDDrawRectangle(0,0,239,3);
LCDClrArea(1,4,238,14);
if(stDevPtr->flag & 0x02)
LCDPrintf(8,1,0,lang,"%s %s",acdcTitleStr,ui_acdc_man.timerStarting[lang]);
else if(stDevPtr->flag & 0x01)
LCDPrintf(8,1,0,lang,"%s %s",acdcTitleStr,ui_aisle_admin.open[lang]);
else
LCDPrintf(8,1,0,lang,"%s %s",acdcTitleStr,ui_aisle_admin.close[lang]);
LCDPrintf(8,5,0,lang,"%s: %02d.%02d ℃",ui_acdc_man.curTemp[lang],
stDevPtr->curTemp / 10,(stDevPtr->curTemp % 10) * 10);
LCDPrintf(8,7,0,lang,"%s %s",ui_aisle_admin.no_1[lang],ui_aisle_admin.open[lang]);
LCDPrintf(8,9,0,lang,"%s %s",ui_aisle_admin.no_2[lang],ui_aisle_admin.close[lang]);
LCDPrintf(8,11,0,lang,"%s %s",ui_aisle_admin.no_3[lang],ui_acdc_man.timerManage[lang]);
if(stDevPtr->flag & 0x01)
LCDPrintf(8,13,0,lang,"%s %s: %02d.%02d ℃",ui_aisle_admin.no_4[lang],ui_acdc_man.setTemp[lang],
stDevPtr->setTemp1 / 10,(stDevPtr->setTemp1 % 10) * 10 );
}
if(topReturn)
{
//WriteUserSystemPara(UserPara);
return;
}
key = ReadKeyValue();
OSTimeDly(5);
switch(key)
{
case '1':
case '2':
flag = (key == '1') ? 1 : 0;
LCDPrintf(8,1,0,lang,"%s %s",acdcTitleStr,ui_acdc_man.operating[lang]);
rst = acdc_hot_API(cabinetNO,(flag & 0x01) * (ACDC_MAX_HOT_TEMP / 2));
if(rst)
{
stDevPtr->flag &= ~0x03;
stDevPtr->flag |= flag;
stDevPtr->flag |= ((flag && (stDevPtr->flag & 0x7C)) ? 0x02 : 0);
stDevPtr->setTemp1 = ACDC_MAX_HOT_TEMP / 2;
}
topFlush = 1;
break;
case '3':
acdc_hotTimerHandlePage(cabinetNO);
topFlush = 1;
break;
case '4'://设置温度
if(!(stDevPtr->flag & 0x01))
break;
temp = 0;
topFlush = 1;
enterSub = 1;
while(enterSub)
{
if(topFlush)
{
topFlush = 0;
LCDPrintf(8,13,1,lang,"%s %s: %02d.%02d ℃",ui_aisle_admin.no_4[lang],ui_acdc_man.setTemp[lang],
temp / 10,(temp % 10) * 10);
}
key = ReadKeyValue();
OSTimeDly(5);
switch(key)
{
case '1':
case '2':
case '3':
case '4':
case '5':
case '6':
case '7':
case '8':
case '9':
case '0':
temp = temp * 10 + (key - '0');
topFlush = 1;
break;
case 'C':
enterSub = 0;
topFlush = 1;
break;
case 'E'://确定编辑
stDevPtr->setTemp1 = ((temp >= ACDC_MAX_HOT_TEMP) ?ACDC_MAX_HOT_TEMP : temp);
TraceCompress("temp: %d %d\r\n",stDevPtr->setTemp1,temp);
if((stDevPtr->flag & 0x01) || (stDevPtr->flag & 0x02))
acdc_hot_API(cabinetNO,stDevPtr->setTemp1);
enterSub = 0;
topFlush = 1;
break;
default:
break;
}
}
break;
case 'C':
topReturn = 1;
break;
case 'E':
topReturn = 1;
break;
default:
break;
}
}
}