/*----------------------------------------------------------------------------
MAIN function
*----------------------------------------------------------------------------*/
int main (void) { /* Main Program */
char state = 0;
uint8_t buf[] = {0x5, 0xA, 0x3, 0x5A};
SysTick_Config(SystemCoreClock/100); /* Generate IRQ each ~10 ms */
LED_init(); /* LED Initialization */
SER_init(); /* UART#1 Initialization */
SPI0_init();
while (1)
{ /* Loop forever */
if (clock_1s)
{
clock_1s = 0;
state++;
if (state & 0x01)
{
LED_On();
sendchar('A');
sendchar('\n');
sendchar('\r');
SPI0_send(buf, 4);
}
else
LED_Off();
}
}
}
/*----------------------------------------------------------------------------
MAIN function
*----------------------------------------------------------------------------*/
int main (void)
{
unsigned long status, current_tick, last_tick, i, j;
unsigned char data[5];
unsigned char temp;
// SysTick_Config(SystemCoreClock/1000); /* Generate IRQ each 1 ms */
init_mfrc500();
SER_init(); /* UART#1 Initialization */
SSP_IOConfig();
SSP_Init();
// init_eint();
printf("Welcome\r\n");
if(PcdReset() != MI_OK);
{
printf("PcdReset Fail\r\n");
while(1);
}
while(1);
}
int serial_main()
{
int i, j = 0;
SER_init();
configureGPIO();
while (1)
{
ledOn();
printf("Led On, Iteration %d\n\r", j);
for (i = 0; i < 0x0007FFFF; i++)
{
}
ledOff();
printf("Led Off, Iteration %d\n\r", j);
for (i = 0; i < 0x0007FFFF; i++)
{
}
j++;
}
}
/*----------------------------------------------------------------------------
* Main:
*---------------------------------------------------------------------------*/
int main (void) {
char *sp,*cp,*next;
U32 i;
SystemInit(); /* initialize clocks */
init_display(); /* initialize the display */
SER_init (0); /* initialize serial interface */
printf (intro); /* display example info */
printf (help);
init_card ();
while (1) {
printf ("\nCmd> "); /* display prompt */
fflush (stdout);
/* get command line input */
if (getline (in_line, sizeof (in_line)) == __FALSE) {
continue;
}
sp = get_entry (&in_line[0], &next);
if (*sp == 0) {
continue;
}
for (cp = sp; *cp && *cp != ' '; cp++) {
*cp = toupper (*cp); /* command to upper-case */
}
for (i = 0; i < CMD_COUNT; i++) {
if (strcmp (sp, (const char *)&cmd[i].val)) {
continue;
}
init_card(); /* check if card is removed */
cmd[i].func (next); /* execute command function */
break;
}
if (i == CMD_COUNT) {
printf ("\nCommand error\n");
}
}
}
/*----------------------------------------------------------------------------
MAIN function
*----------------------------------------------------------------------------*/
int main (void)
{
unsigned char status = MI_NOTAGERR;
unsigned long current_tick, last_tick, i, j;
unsigned char data[5];
unsigned char temp;
// SysTick_Config(SystemCoreClock/1000); /* Generate IRQ each 1 ms */
// init_mfrc500();
SER_init(); /* UART#1 Initialization */
SSP_IOConfig();
SSP_Init();
// init_eint();
#ifdef DEBUG_UART
printf("Welcome\r\n");
#endif
init_mfrc500();
//while(1)
//{
// for(i=0; i<5; i++)
// data[i] = ReadE2RC(0x00+i);
// printf("Addr 0x00 content 0x%x, ", data[0]);
//#ifdef DEBUG_UART
// for(i=1; i<4; i++)
// printf("0x%x, ", data[i]);
//#endif
// printf("0x%x\r\n", data[4]);
// DelayMs(2000);
//}
compcd_antenna();
PcdConfigISOType();
while(1)
{
COM_Recv();
//M1Identify();
if (cRecvOk == 1)
{
cRecvOk = 0;
switch (cCommand)
{
case ReadCdSrl:
M1Identify();
break;
case ReadCdDat:
M1Read();
break;
case WritCdDat:
M1Write();
break;
case InitCdPrs:
M1Initval();
break;
case ReadCdPrs:
M1ReadVal();
break;
case IncrCdPrs:
M1Increment();
break;
case DecrCdPrs:
M1Decrement();
break;
case TranCdPrs:
M1Transfer();
break;
case HaltCdIns:
M1Halt();
break;
case SetBound:
// SetBaud();
break;
}
}
PcdIdentify();
printf("-------------------------^.^-------------------------------------\r\n");
}
}
