/*!
\DRAGGER_CONSTRUCTOR
\NODEKIT_PRE_DIAGRAM
\verbatim
CLASS SoRotateSphericalDragger
-->"this"
"callbackList"
"topSeparator"
"motionMatrix"
"geomSeparator"
--> "rotatorSwitch"
--> "rotator"
--> "rotatorActive"
--> "feedbackSwitch"
--> "feedback"
--> "feedbackActive"
\endverbatim
\NODEKIT_POST_DIAGRAM
\NODEKIT_PRE_TABLE
\verbatim
CLASS SoRotateSphericalDragger
PVT "this", SoRotateSphericalDragger ---
"callbackList", SoNodeKitListPart [ SoCallback, SoEventCallback ]
PVT "topSeparator", SoSeparator ---
PVT "motionMatrix", SoMatrixTransform ---
PVT "geomSeparator", SoSeparator ---
PVT "rotatorSwitch", SoSwitch ---
"rotator", SoSeparator ---
"rotatorActive", SoSeparator ---
PVT "feedbackSwitch", SoSwitch ---
"feedback", SoSeparator ---
"feedbackActive", SoSeparator ---
\endverbatim
\NODEKIT_POST_TABLE
*/
SoRotateSphericalDragger::SoRotateSphericalDragger(void)
{
SO_KIT_INTERNAL_CONSTRUCTOR(SoRotateSphericalDragger);
SO_KIT_ADD_CATALOG_ENTRY(rotatorSwitch, SoSwitch, TRUE, geomSeparator, feedbackSwitch, FALSE);
SO_KIT_ADD_CATALOG_ENTRY(rotator, SoSeparator, TRUE, rotatorSwitch, rotatorActive, TRUE);
SO_KIT_ADD_CATALOG_ENTRY(rotatorActive, SoSeparator, TRUE, rotatorSwitch, "", TRUE);
SO_KIT_ADD_CATALOG_ENTRY(feedbackSwitch, SoSwitch, TRUE, geomSeparator, "", FALSE);
SO_KIT_ADD_CATALOG_ENTRY(feedback, SoSeparator, TRUE, feedbackSwitch, feedbackActive, TRUE);
SO_KIT_ADD_CATALOG_ENTRY(feedbackActive, SoSeparator, TRUE, feedbackSwitch, "", TRUE);
if (SO_KIT_IS_FIRST_INSTANCE()) {
SoInteractionKit::readDefaultParts("rotateSphericalDragger.iv",
ROTATESPHERICALDRAGGER_draggergeometry,
static_cast<int>(strlen(ROTATESPHERICALDRAGGER_draggergeometry)));
}
SO_KIT_ADD_FIELD(rotation, (SbRotation(SbVec3f(0.0f, 0.0f, 1.0f), 0.0f)));
SO_KIT_INIT_INSTANCE();
// initialize default parts
this->setPartAsDefault("rotator", "rotateSphericalRotator");
this->setPartAsDefault("rotatorActive", "rotateSphericalRotatorActive");
this->setPartAsDefault("feedback", "rotateSphericalFeedback");
this->setPartAsDefault("feedbackActive", "rotateSphericalFeedbackActive");
// initialize swich values
SoSwitch *sw;
sw = SO_GET_ANY_PART(this, "rotatorSwitch", SoSwitch);
SoInteractionKit::setSwitchValue(sw, 0);
sw = SO_GET_ANY_PART(this, "feedbackSwitch", SoSwitch);
SoInteractionKit::setSwitchValue(sw, 0);
// setup projector
this->sphereProj = new SbSpherePlaneProjector();
this->userProj = FALSE;
this->addStartCallback(SoRotateSphericalDragger::startCB);
this->addMotionCallback(SoRotateSphericalDragger::motionCB);
this->addFinishCallback(SoRotateSphericalDragger::doneCB);
this->addValueChangedCallback(SoRotateSphericalDragger::valueChangedCB);
this->fieldSensor = new SoFieldSensor(SoRotateSphericalDragger::fieldSensorCB, this);
this->fieldSensor->setPriority(0);
this->setUpConnections(TRUE, TRUE);
}
/*!
\DRAGGER_CONSTRUCTOR
\NODEKIT_PRE_DIAGRAM
\verbatim
CLASS SoScale2Dragger
-->"this"
"callbackList"
"topSeparator"
"motionMatrix"
"geomSeparator"
--> "scalerSwitch"
--> "scaler"
--> "scalerActive"
--> "feedbackSwitch"
--> "feedback"
--> "feedbackActive"
\endverbatim
\NODEKIT_POST_DIAGRAM
\NODEKIT_PRE_TABLE
\verbatim
CLASS SoScale2Dragger
PVT "this", SoScale2Dragger ---
"callbackList", SoNodeKitListPart [ SoCallback, SoEventCallback ]
PVT "topSeparator", SoSeparator ---
PVT "motionMatrix", SoMatrixTransform ---
PVT "geomSeparator", SoSeparator ---
PVT "scalerSwitch", SoSwitch ---
"scaler", SoSeparator ---
"scalerActive", SoSeparator ---
PVT "feedbackSwitch", SoSwitch ---
"feedback", SoSeparator ---
"feedbackActive", SoSeparator ---
\endverbatim
\NODEKIT_POST_TABLE
*/
SoScale2Dragger::SoScale2Dragger(void)
{
SO_KIT_INTERNAL_CONSTRUCTOR(SoScale2Dragger);
SO_KIT_ADD_CATALOG_ENTRY(scalerSwitch, SoSwitch, TRUE, geomSeparator, feedbackSwitch, FALSE);
SO_KIT_ADD_CATALOG_ENTRY(scaler, SoSeparator, TRUE, scalerSwitch, scalerActive, TRUE);
SO_KIT_ADD_CATALOG_ENTRY(scalerActive, SoSeparator, TRUE, scalerSwitch, "", TRUE);
SO_KIT_ADD_CATALOG_ENTRY(feedbackSwitch, SoSwitch, TRUE, geomSeparator, "", FALSE);
SO_KIT_ADD_CATALOG_ENTRY(feedback, SoSeparator, TRUE, feedbackSwitch, feedbackActive, TRUE);
SO_KIT_ADD_CATALOG_ENTRY(feedbackActive, SoSeparator, TRUE, feedbackSwitch, "", TRUE);
if (SO_KIT_IS_FIRST_INSTANCE()) {
SoInteractionKit::readDefaultParts("scale2Dragger.iv",
SCALE2DRAGGER_draggergeometry,
static_cast<int>(strlen(SCALE2DRAGGER_draggergeometry)));
}
SO_KIT_ADD_FIELD(scaleFactor, (1.0f, 1.0f, 1.0f));
SO_KIT_INIT_INSTANCE();
// initialize default parts
this->setPartAsDefault("scaler", "scale2Scaler");
this->setPartAsDefault("scalerActive", "scale2ScalerActive");
this->setPartAsDefault("feedback", "scale2Feedback");
this->setPartAsDefault("feedbackActive", "scale2FeedbackActive");
// initialize swich values
SoSwitch *sw;
sw = SO_GET_ANY_PART(this, "scalerSwitch", SoSwitch);
SoInteractionKit::setSwitchValue(sw, 0);
sw = SO_GET_ANY_PART(this, "feedbackSwitch", SoSwitch);
SoInteractionKit::setSwitchValue(sw, 0);
// setup projector
this->planeProj = new SbPlaneProjector();
this->addStartCallback(SoScale2Dragger::startCB);
this->addMotionCallback(SoScale2Dragger::motionCB);
this->addFinishCallback(SoScale2Dragger::finishCB);
this->addValueChangedCallback(SoScale2Dragger::valueChangedCB);
this->fieldSensor = new SoFieldSensor(SoScale2Dragger::fieldSensorCB, this);
this->fieldSensor->setPriority(0);
this->setUpConnections(TRUE, TRUE);
}
////////////////////////////////////////////////////////////////////////
//
// Description:
// Constructor
//
SoTranslate2Dragger::SoTranslate2Dragger()
//
////////////////////////////////////////////////////////////////////////
{
SO_KIT_CONSTRUCTOR(SoTranslate2Dragger);
isBuiltIn = TRUE;
// Put this stuff under the geomSeparator so it will draw more
// efficiently.
SO_KIT_ADD_CATALOG_ENTRY(translatorSwitch, SoSwitch, TRUE,
geomSeparator,\x0,FALSE);
SO_KIT_ADD_CATALOG_ENTRY(translator, SoSeparator, TRUE,
translatorSwitch,\x0,TRUE);
SO_KIT_ADD_CATALOG_ENTRY(translatorActive, SoSeparator, TRUE,
translatorSwitch,\x0,TRUE);
SO_KIT_ADD_CATALOG_ENTRY(feedbackSwitch, SoSwitch, TRUE,
geomSeparator,\x0,FALSE);
SO_KIT_ADD_CATALOG_ENTRY(feedback, SoSeparator, TRUE,
feedbackSwitch,\x0,TRUE);
SO_KIT_ADD_CATALOG_ENTRY(feedbackActive, SoSeparator, TRUE,
feedbackSwitch,\x0,TRUE);
SO_KIT_ADD_CATALOG_ENTRY(axisFeedbackSwitch, SoSwitch, TRUE,
geomSeparator,\x0,FALSE);
SO_KIT_ADD_CATALOG_ENTRY(xAxisFeedback, SoSeparator, TRUE,
axisFeedbackSwitch,\x0,TRUE);
SO_KIT_ADD_CATALOG_ENTRY(yAxisFeedback, SoSeparator, TRUE,
axisFeedbackSwitch,\x0,TRUE);
// read geometry for shared parts
if (SO_KIT_IS_FIRST_INSTANCE())
readDefaultParts("translate2Dragger.iv", geomBuffer, sizeof(geomBuffer) );
SO_KIT_ADD_FIELD(translation, (0.0, 0.0, 0.0));
SO_KIT_INIT_INSTANCE();
// create the parts...
setPartAsDefault("translator", "translate2Translator");
setPartAsDefault("translatorActive","translate2TranslatorActive");
setPartAsDefault("feedback", "translate2Feedback");
setPartAsDefault("feedbackActive", "translate2FeedbackActive");
setPartAsDefault("xAxisFeedback", "translate2XAxisFeedback");
setPartAsDefault("yAxisFeedback", "translate2YAxisFeedback");
// Set the switches to 0...
setSwitchValue( translatorSwitch.getValue(), 0 );
setSwitchValue( feedbackSwitch.getValue(), 0 );
// Set the axis feedback switch to SO_SWITCH_NONE
// They're only displayed while dragging
setSwitchValue( axisFeedbackSwitch.getValue(), SO_SWITCH_NONE );
// Create the line projector
planeProj = new SbPlaneProjector();
// add the callbacks to perform the dragging
addStartCallback( &SoTranslate2Dragger::startCB );
addMotionCallback( &SoTranslate2Dragger::motionCB );
addFinishCallback( &SoTranslate2Dragger::finishCB );
// add callback to respond to the shift key, for constraining motion
// to a line within the plane.
addOtherEventCallback( &SoTranslate2Dragger::metaKeyChangeCB );
// Updates the translation field when the motionMatrix is set.
addValueChangedCallback( &SoTranslate2Dragger::valueChangedCB );
// Updates the motionMatrix when the translation field is set.
fieldSensor = new SoFieldSensor( &SoTranslate2Dragger::fieldSensorCB, this);
fieldSensor->setPriority( 0 );
setUpConnections( TRUE, TRUE );
}
////////////////////////////////////////////////////////////////////////
//
// Description:
// Constructor
//
SoRotateDiscDragger::SoRotateDiscDragger()
//
////////////////////////////////////////////////////////////////////////
{
SO_KIT_CONSTRUCTOR(SoRotateDiscDragger);
isBuiltIn = TRUE;
// Put this stuff under the geomSeparator so it will draw more
// efficiently.
SO_KIT_ADD_CATALOG_ENTRY(rotatorSwitch, SoSwitch, TRUE,
geomSeparator,\x0,FALSE);
SO_KIT_ADD_CATALOG_ENTRY(rotator, SoSeparator, TRUE,
rotatorSwitch,\x0,TRUE);
SO_KIT_ADD_CATALOG_ENTRY(rotatorActive, SoSeparator, TRUE,
rotatorSwitch,\x0,TRUE);
SO_KIT_ADD_CATALOG_ENTRY(feedbackSwitch, SoSwitch, TRUE,
geomSeparator,\x0,FALSE);
SO_KIT_ADD_CATALOG_ENTRY(feedback, SoSeparator, TRUE,
feedbackSwitch,\x0,TRUE);
SO_KIT_ADD_CATALOG_ENTRY(feedbackActive, SoSeparator, TRUE,
feedbackSwitch,\x0,TRUE);
// read geometry for shared parts
if (SO_KIT_IS_FIRST_INSTANCE())
readDefaultParts("rotateDiscDragger.iv", geomBuffer, sizeof(geomBuffer) );
SO_KIT_ADD_FIELD(rotation, (0.0, 0.0, 0.0, 1.0));
SO_KIT_INIT_INSTANCE();
// create the parts...
setPartAsDefault("rotator", "rotateDiscRotator");
setPartAsDefault("rotatorActive",
"rotateDiscRotatorActive");
setPartAsDefault("feedback", "rotateDiscFeedback");
setPartAsDefault("feedbackActive",
"rotateDiscFeedbackActive");
// Set the switches to 0...
setSwitchValue( rotatorSwitch.getValue(), 0 );
setSwitchValue( feedbackSwitch.getValue(), 0 );
// our humble projector
planeProj = new SbPlaneProjector();
// add the callbacks to perform the dragging
addStartCallback( &SoRotateDiscDragger::startCB );
addMotionCallback( &SoRotateDiscDragger::motionCB );
addFinishCallback( &SoRotateDiscDragger::doneCB );
// Updates the scaleFactor field when the motionMatrix is set.
addValueChangedCallback( &SoRotateDiscDragger::valueChangedCB );
// Updates the motionMatrix when the scaleFactor field is set.
fieldSensor
= new SoFieldSensor(&SoRotateDiscDragger::fieldSensorCB, this);
fieldSensor->setPriority( 0 );
setUpConnections( TRUE, TRUE );
}
/*!
\DRAGGER_CONSTRUCTOR
\NODEKIT_PRE_DIAGRAM
\verbatim
CLASS SoHandleBoxDragger
-->"this"
"callbackList"
"topSeparator"
"motionMatrix"
--> "surroundScale"
"geomSeparator"
--> "drawStyle"
--> "translator1Switch"
--> "translator1"
--> "translator1Active"
--> "translator2Switch"
--> "translator2"
--> "translator2Active"
--> "translator3Switch"
--> "translator3"
--> "translator3Active"
--> "translator4Switch"
--> "translator4"
--> "translator4Active"
--> "translator5Switch"
--> "translator5"
--> "translator5Active"
--> "translator6Switch"
--> "translator6"
--> "translator6Active"
--> "extruder1Switch"
--> "extruder1"
--> "extruder1Active"
--> "extruder2Switch"
--> "extruder2"
--> "extruder2Active"
--> "extruder3Switch"
--> "extruder3"
--> "extruder3Active"
--> "extruder4Switch"
--> "extruder4"
--> "extruder4Active"
--> "extruder5Switch"
--> "extruder5"
--> "extruder5Active"
--> "extruder6Switch"
--> "extruder6"
--> "extruder6Active"
--> "uniform1Switch"
--> "uniform1"
--> "uniform1Active"
--> "uniform2Switch"
--> "uniform2"
--> "uniform2Active"
--> "uniform3Switch"
--> "uniform3"
--> "uniform3Active"
--> "uniform4Switch"
--> "uniform4"
--> "uniform4Active"
--> "uniform5Switch"
--> "uniform5"
--> "uniform5Active"
--> "uniform6Switch"
--> "uniform6"
--> "uniform6Active"
--> "uniform7Switch"
--> "uniform7"
--> "uniform7Active"
--> "uniform8Switch"
--> "uniform8"
--> "uniform8Active"
--> "arrowTranslation"
--> "arrow1Switch"
--> "arrow1"
--> "arrow2Switch"
--> "arrow2"
--> "arrow3Switch"
--> "arrow3"
--> "arrow4Switch"
--> "arrow4"
--> "arrow5Switch"
--> "arrow5"
--> "arrow6Switch"
--> "arrow6"
\endverbatim
\NODEKIT_POST_DIAGRAM
\NODEKIT_PRE_TABLE
\verbatim
CLASS SoHandleBoxDragger
PVT "this", SoHandleBoxDragger ---
"callbackList", SoNodeKitListPart [ SoCallback, SoEventCallback ]
PVT "topSeparator", SoSeparator ---
PVT "motionMatrix", SoMatrixTransform ---
"surroundScale", SoSurroundScale ---
PVT "geomSeparator", SoSeparator ---
PVT "drawStyle", SoDrawStyle ---
PVT "translator1Switch", SoSwitch ---
"translator1", SoSeparator ---
"translator1Active", SoSeparator ---
PVT "translator2Switch", SoSwitch ---
"translator2", SoSeparator ---
"translator2Active", SoSeparator ---
PVT "translator3Switch", SoSwitch ---
"translator3", SoSeparator ---
"translator3Active", SoSeparator ---
PVT "translator4Switch", SoSwitch ---
"translator4", SoSeparator ---
"translator4Active", SoSeparator ---
PVT "translator5Switch", SoSwitch ---
"translator5", SoSeparator ---
"translator5Active", SoSeparator ---
PVT "translator6Switch", SoSwitch ---
"translator6", SoSeparator ---
"translator6Active", SoSeparator ---
PVT "extruder1Switch", SoSwitch ---
"extruder1", SoSeparator ---
"extruder1Active", SoSeparator ---
PVT "extruder2Switch", SoSwitch ---
"extruder2", SoSeparator ---
"extruder2Active", SoSeparator ---
PVT "extruder3Switch", SoSwitch ---
"extruder3", SoSeparator ---
"extruder3Active", SoSeparator ---
PVT "extruder4Switch", SoSwitch ---
"extruder4", SoSeparator ---
"extruder4Active", SoSeparator ---
PVT "extruder5Switch", SoSwitch ---
"extruder5", SoSeparator ---
"extruder5Active", SoSeparator ---
PVT "extruder6Switch", SoSwitch ---
"extruder6", SoSeparator ---
"extruder6Active", SoSeparator ---
PVT "uniform1Switch", SoSwitch ---
"uniform1", SoSeparator ---
"uniform1Active", SoSeparator ---
PVT "uniform2Switch", SoSwitch ---
"uniform2", SoSeparator ---
"uniform2Active", SoSeparator ---
PVT "uniform3Switch", SoSwitch ---
"uniform3", SoSeparator ---
"uniform3Active", SoSeparator ---
PVT "uniform4Switch", SoSwitch ---
"uniform4", SoSeparator ---
"uniform4Active", SoSeparator ---
PVT "uniform5Switch", SoSwitch ---
"uniform5", SoSeparator ---
"uniform5Active", SoSeparator ---
PVT "uniform6Switch", SoSwitch ---
"uniform6", SoSeparator ---
"uniform6Active", SoSeparator ---
PVT "uniform7Switch", SoSwitch ---
"uniform7", SoSeparator ---
"uniform7Active", SoSeparator ---
PVT "uniform8Switch", SoSwitch ---
"uniform8", SoSeparator ---
"uniform8Active", SoSeparator ---
PVT "arrowTranslation", SoTranslation ---
PVT "arrow1Switch", SoSwitch ---
"arrow1", SoSeparator ---
PVT "arrow2Switch", SoSwitch ---
"arrow2", SoSeparator ---
PVT "arrow3Switch", SoSwitch ---
"arrow3", SoSeparator ---
PVT "arrow4Switch", SoSwitch ---
"arrow4", SoSeparator ---
PVT "arrow5Switch", SoSwitch ---
"arrow5", SoSeparator ---
PVT "arrow6Switch", SoSwitch ---
"arrow6", SoSeparator ---
\endverbatim
\NODEKIT_POST_TABLE
*/
SoHandleBoxDragger::SoHandleBoxDragger(void)
{
SO_KIT_INTERNAL_CONSTRUCTOR(SoHandleBoxDragger);
SO_KIT_ADD_CATALOG_ENTRY(surroundScale, SoSurroundScale, TRUE, topSeparator, geomSeparator, TRUE);
SO_KIT_ADD_CATALOG_ENTRY(drawStyle, SoDrawStyle, TRUE, geomSeparator, translator1Switch, FALSE);
SO_KIT_ADD_CATALOG_ENTRY(translator1Switch, SoSwitch, TRUE, geomSeparator, translator2Switch, FALSE);
SO_KIT_ADD_CATALOG_ENTRY(translator1, SoSeparator, TRUE, translator1Switch, translator1Active, TRUE);
SO_KIT_ADD_CATALOG_ENTRY(translator1Active, SoSeparator, TRUE, translator1Switch, "", TRUE);
SO_KIT_ADD_CATALOG_ENTRY(translator2Switch, SoSwitch, TRUE, geomSeparator, translator3Switch, FALSE);
SO_KIT_ADD_CATALOG_ENTRY(translator2, SoSeparator, TRUE, translator2Switch, translator2Active, TRUE);
SO_KIT_ADD_CATALOG_ENTRY(translator2Active, SoSeparator, TRUE, translator2Switch, "", TRUE);
SO_KIT_ADD_CATALOG_ENTRY(translator3Switch, SoSwitch, TRUE, geomSeparator, translator4Switch, FALSE);
SO_KIT_ADD_CATALOG_ENTRY(translator3, SoSeparator, TRUE, translator3Switch, translator3Active, TRUE);
SO_KIT_ADD_CATALOG_ENTRY(translator3Active, SoSeparator, TRUE, translator3Switch, "", TRUE);
SO_KIT_ADD_CATALOG_ENTRY(translator4Switch, SoSwitch, TRUE, geomSeparator, translator5Switch, FALSE);
SO_KIT_ADD_CATALOG_ENTRY(translator4, SoSeparator, TRUE, translator4Switch, translator4Active, TRUE);
SO_KIT_ADD_CATALOG_ENTRY(translator4Active, SoSeparator, TRUE, translator4Switch, "", TRUE);
SO_KIT_ADD_CATALOG_ENTRY(translator5Switch, SoSwitch, TRUE, geomSeparator, translator6Switch, FALSE);
SO_KIT_ADD_CATALOG_ENTRY(translator5, SoSeparator, TRUE, translator5Switch, translator5Active, TRUE);
SO_KIT_ADD_CATALOG_ENTRY(translator5Active, SoSeparator, TRUE, translator5Switch, "", TRUE);
SO_KIT_ADD_CATALOG_ENTRY(translator6Switch, SoSwitch, TRUE, geomSeparator, extruder1Switch, FALSE);
SO_KIT_ADD_CATALOG_ENTRY(translator6, SoSeparator, TRUE, translator6Switch, translator6Active, TRUE);
SO_KIT_ADD_CATALOG_ENTRY(translator6Active, SoSeparator, TRUE, translator6Switch, "", TRUE);
SO_KIT_ADD_CATALOG_ENTRY(extruder1Switch, SoSwitch, TRUE, geomSeparator, extruder2Switch, FALSE);
SO_KIT_ADD_CATALOG_ENTRY(extruder1, SoSeparator, TRUE, extruder1Switch, extruder1Active, TRUE);
SO_KIT_ADD_CATALOG_ENTRY(extruder1Active, SoSeparator, TRUE, extruder1Switch, "", TRUE);
SO_KIT_ADD_CATALOG_ENTRY(extruder2Switch, SoSwitch, TRUE, geomSeparator, extruder3Switch, FALSE);
SO_KIT_ADD_CATALOG_ENTRY(extruder2, SoSeparator, TRUE, extruder2Switch, extruder2Active, TRUE);
SO_KIT_ADD_CATALOG_ENTRY(extruder2Active, SoSeparator, TRUE, extruder2Switch, "", TRUE);
SO_KIT_ADD_CATALOG_ENTRY(extruder3Switch, SoSwitch, TRUE, geomSeparator, extruder4Switch, FALSE);
SO_KIT_ADD_CATALOG_ENTRY(extruder3, SoSeparator, TRUE, extruder3Switch, extruder3Active, TRUE);
SO_KIT_ADD_CATALOG_ENTRY(extruder3Active, SoSeparator, TRUE, extruder3Switch, "", TRUE);
SO_KIT_ADD_CATALOG_ENTRY(extruder4Switch, SoSwitch, TRUE, geomSeparator, extruder5Switch, FALSE);
SO_KIT_ADD_CATALOG_ENTRY(extruder4, SoSeparator, TRUE, extruder4Switch, extruder4Active, TRUE);
SO_KIT_ADD_CATALOG_ENTRY(extruder4Active, SoSeparator, TRUE, extruder4Switch, "", TRUE);
SO_KIT_ADD_CATALOG_ENTRY(extruder5Switch, SoSwitch, TRUE, geomSeparator, extruder6Switch, FALSE);
SO_KIT_ADD_CATALOG_ENTRY(extruder5, SoSeparator, TRUE, extruder5Switch, extruder5Active, TRUE);
SO_KIT_ADD_CATALOG_ENTRY(extruder5Active, SoSeparator, TRUE, extruder5Switch, "", TRUE);
SO_KIT_ADD_CATALOG_ENTRY(extruder6Switch, SoSwitch, TRUE, geomSeparator, uniform1Switch, FALSE);
SO_KIT_ADD_CATALOG_ENTRY(extruder6, SoSeparator, TRUE, extruder6Switch, extruder6Active, TRUE);
SO_KIT_ADD_CATALOG_ENTRY(extruder6Active, SoSeparator, TRUE, extruder6Switch, "", TRUE);
SO_KIT_ADD_CATALOG_ENTRY(uniform1Switch, SoSwitch, TRUE, geomSeparator, uniform2Switch, FALSE);
SO_KIT_ADD_CATALOG_ENTRY(uniform1, SoSeparator, TRUE, uniform1Switch, uniform1Active, TRUE);
SO_KIT_ADD_CATALOG_ENTRY(uniform1Active, SoSeparator, TRUE, uniform1Switch, "", TRUE);
SO_KIT_ADD_CATALOG_ENTRY(uniform2Switch, SoSwitch, TRUE, geomSeparator, uniform3Switch, FALSE);
SO_KIT_ADD_CATALOG_ENTRY(uniform2, SoSeparator, TRUE, uniform2Switch, uniform2Active, TRUE);
SO_KIT_ADD_CATALOG_ENTRY(uniform2Active, SoSeparator, TRUE, uniform2Switch, "", TRUE);
SO_KIT_ADD_CATALOG_ENTRY(uniform3Switch, SoSwitch, TRUE, geomSeparator, uniform4Switch, FALSE);
SO_KIT_ADD_CATALOG_ENTRY(uniform3, SoSeparator, TRUE, uniform3Switch, uniform3Active, TRUE);
SO_KIT_ADD_CATALOG_ENTRY(uniform3Active, SoSeparator, TRUE, uniform3Switch, "", TRUE);
SO_KIT_ADD_CATALOG_ENTRY(uniform4Switch, SoSwitch, TRUE, geomSeparator, uniform5Switch, FALSE);
SO_KIT_ADD_CATALOG_ENTRY(uniform4, SoSeparator, TRUE, uniform4Switch, uniform4Active, TRUE);
SO_KIT_ADD_CATALOG_ENTRY(uniform4Active, SoSeparator, TRUE, uniform4Switch, "", TRUE);
SO_KIT_ADD_CATALOG_ENTRY(uniform5Switch, SoSwitch, TRUE, geomSeparator, uniform6Switch, FALSE);
SO_KIT_ADD_CATALOG_ENTRY(uniform5, SoSeparator, TRUE, uniform5Switch, uniform5Active, TRUE);
SO_KIT_ADD_CATALOG_ENTRY(uniform5Active, SoSeparator, TRUE, uniform5Switch, "", TRUE);
SO_KIT_ADD_CATALOG_ENTRY(uniform6Switch, SoSwitch, TRUE, geomSeparator, uniform7Switch, FALSE);
SO_KIT_ADD_CATALOG_ENTRY(uniform6, SoSeparator, TRUE, uniform6Switch, uniform6Active, TRUE);
SO_KIT_ADD_CATALOG_ENTRY(uniform6Active, SoSeparator, TRUE, uniform6Switch, "", TRUE);
SO_KIT_ADD_CATALOG_ENTRY(uniform7Switch, SoSwitch, TRUE, geomSeparator, uniform8Switch, FALSE);
SO_KIT_ADD_CATALOG_ENTRY(uniform7, SoSeparator, TRUE, uniform7Switch, uniform7Active, TRUE);
SO_KIT_ADD_CATALOG_ENTRY(uniform7Active, SoSeparator, TRUE, uniform7Switch, "", TRUE);
SO_KIT_ADD_CATALOG_ENTRY(uniform8Switch, SoSwitch, TRUE, geomSeparator, arrowTranslation, FALSE);
SO_KIT_ADD_CATALOG_ENTRY(uniform8, SoSeparator, TRUE, uniform8Switch, uniform8Active, TRUE);
SO_KIT_ADD_CATALOG_ENTRY(uniform8Active, SoSeparator, TRUE, uniform8Switch, "", TRUE);
SO_KIT_ADD_CATALOG_ENTRY(arrowTranslation, SoTranslation, TRUE, geomSeparator, arrow1Switch, FALSE);
SO_KIT_ADD_CATALOG_ENTRY(arrow1Switch, SoSwitch, TRUE, geomSeparator, arrow2Switch, FALSE);
SO_KIT_ADD_CATALOG_ENTRY(arrow1, SoSeparator, TRUE, arrow1Switch, "", TRUE);
SO_KIT_ADD_CATALOG_ENTRY(arrow2Switch, SoSwitch, TRUE, geomSeparator, arrow3Switch, FALSE);
SO_KIT_ADD_CATALOG_ENTRY(arrow2, SoSeparator, TRUE, arrow2Switch, "", TRUE);
SO_KIT_ADD_CATALOG_ENTRY(arrow3Switch, SoSwitch, TRUE, geomSeparator, arrow4Switch, FALSE);
SO_KIT_ADD_CATALOG_ENTRY(arrow3, SoSeparator, TRUE, arrow3Switch, "", TRUE);
SO_KIT_ADD_CATALOG_ENTRY(arrow4Switch, SoSwitch, TRUE, geomSeparator, arrow5Switch, FALSE);
SO_KIT_ADD_CATALOG_ENTRY(arrow4, SoSeparator, TRUE, arrow4Switch, "", TRUE);
SO_KIT_ADD_CATALOG_ENTRY(arrow5Switch, SoSwitch, TRUE, geomSeparator, arrow6Switch, FALSE);
SO_KIT_ADD_CATALOG_ENTRY(arrow5, SoSeparator, TRUE, arrow5Switch, "", TRUE);
SO_KIT_ADD_CATALOG_ENTRY(arrow6Switch, SoSwitch, TRUE, geomSeparator, "", FALSE);
SO_KIT_ADD_CATALOG_ENTRY(arrow6, SoSeparator, TRUE, arrow6Switch, "", TRUE);
if (SO_KIT_IS_FIRST_INSTANCE()) {
SoInteractionKit::readDefaultParts("handleBoxDragger.iv",
HANDLEBOXDRAGGER_draggergeometry,
static_cast<int>(strlen(HANDLEBOXDRAGGER_draggergeometry)));
}
SO_KIT_ADD_FIELD(translation, (0.0f, 0.0f, 0.0f));
SO_KIT_ADD_FIELD(scaleFactor, (1.0f, 1.0f, 1.0f));
SO_KIT_INIT_INSTANCE();
this->setPartAsDefault("translator1", "handleBoxTranslator1");
this->setPartAsDefault("translator2", "handleBoxTranslator2");
this->setPartAsDefault("translator3", "handleBoxTranslator3");
this->setPartAsDefault("translator4", "handleBoxTranslator4");
this->setPartAsDefault("translator5", "handleBoxTranslator5");
this->setPartAsDefault("translator6", "handleBoxTranslator6");
this->setPartAsDefault("translator1Active", "handleBoxTranslator1Active");
this->setPartAsDefault("translator2Active", "handleBoxTranslator2Active");
this->setPartAsDefault("translator3Active", "handleBoxTranslator3Active");
this->setPartAsDefault("translator4Active", "handleBoxTranslator4Active");
this->setPartAsDefault("translator5Active", "handleBoxTranslator5Active");
this->setPartAsDefault("translator6Active", "handleBoxTranslator6Active");
this->setPartAsDefault("extruder1", "handleBoxExtruder1");
this->setPartAsDefault("extruder2", "handleBoxExtruder2");
this->setPartAsDefault("extruder3", "handleBoxExtruder3");
this->setPartAsDefault("extruder4", "handleBoxExtruder4");
this->setPartAsDefault("extruder5", "handleBoxExtruder5");
this->setPartAsDefault("extruder6", "handleBoxExtruder6");
this->setPartAsDefault("extruder1Active", "handleBoxExtruder1Active");
this->setPartAsDefault("extruder2Active", "handleBoxExtruder2Active");
this->setPartAsDefault("extruder3Active", "handleBoxExtruder3Active");
this->setPartAsDefault("extruder4Active", "handleBoxExtruder4Active");
this->setPartAsDefault("extruder5Active", "handleBoxExtruder5Active");
this->setPartAsDefault("extruder6Active", "handleBoxExtruder6Active");
this->setPartAsDefault("uniform1", "handleBoxUniform1");
this->setPartAsDefault("uniform2", "handleBoxUniform2");
this->setPartAsDefault("uniform3", "handleBoxUniform3");
this->setPartAsDefault("uniform4", "handleBoxUniform4");
this->setPartAsDefault("uniform5", "handleBoxUniform5");
this->setPartAsDefault("uniform6", "handleBoxUniform6");
this->setPartAsDefault("uniform7", "handleBoxUniform7");
this->setPartAsDefault("uniform8", "handleBoxUniform8");
this->setPartAsDefault("uniform1Active", "handleBoxUniform1Active");
this->setPartAsDefault("uniform2Active", "handleBoxUniform2Active");
this->setPartAsDefault("uniform3Active", "handleBoxUniform3Active");
this->setPartAsDefault("uniform4Active", "handleBoxUniform4Active");
this->setPartAsDefault("uniform5Active", "handleBoxUniform5Active");
this->setPartAsDefault("uniform6Active", "handleBoxUniform6Active");
this->setPartAsDefault("uniform7Active", "handleBoxUniform7Active");
this->setPartAsDefault("uniform8Active", "handleBoxUniform8Active");
this->setPartAsDefault("arrow1", "handleBoxArrow1");
this->setPartAsDefault("arrow2", "handleBoxArrow2");
this->setPartAsDefault("arrow3", "handleBoxArrow3");
this->setPartAsDefault("arrow4", "handleBoxArrow4");
this->setPartAsDefault("arrow5", "handleBoxArrow5");
this->setPartAsDefault("arrow6", "handleBoxArrow6");
this->constraintState = CONSTRAINT_OFF;
this->whatkind = WHATKIND_NONE;
this->setAllPartsActive(FALSE);
this->planeProj = new SbPlaneProjector;
this->lineProj = new SbLineProjector;
this->addStartCallback(SoHandleBoxDragger::startCB);
this->addMotionCallback(SoHandleBoxDragger::motionCB);
this->addFinishCallback(SoHandleBoxDragger::finishCB);
this->addValueChangedCallback(SoHandleBoxDragger::valueChangedCB);
this->addOtherEventCallback(SoHandleBoxDragger::metaKeyChangeCB);
this->translFieldSensor = new SoFieldSensor(SoHandleBoxDragger::fieldSensorCB, this);
this->translFieldSensor->setPriority(0);
this->scaleFieldSensor = new SoFieldSensor(SoHandleBoxDragger::fieldSensorCB, this);
this->scaleFieldSensor->setPriority(0);
this->setUpConnections(TRUE, TRUE);
}
////////////////////////////////////////////////////////////////////////
//
// Description:
// Constructor
//
SoDragPointDragger::SoDragPointDragger()
//
////////////////////////////////////////////////////////////////////////
{
SO_KIT_CONSTRUCTOR(SoDragPointDragger);
isBuiltIn = TRUE;
SO_KIT_ADD_CATALOG_ENTRY(noRotSep, SoSeparator, FALSE,
topSeparator, geomSeparator,FALSE);
SO_KIT_ADD_CATALOG_ENTRY(xTranslatorSwitch, SoSwitch, FALSE,
noRotSep,\x0,FALSE);
SO_KIT_ADD_CATALOG_ENTRY(xTranslator, SoTranslate1Dragger, TRUE,
xTranslatorSwitch,\x0,TRUE);
SO_KIT_ADD_CATALOG_ENTRY(xyTranslatorSwitch, SoSwitch, FALSE,
noRotSep,\x0,FALSE);
SO_KIT_ADD_CATALOG_ENTRY(xyTranslator, SoTranslate2Dragger, TRUE,
xyTranslatorSwitch,\x0,TRUE);
SO_KIT_ADD_CATALOG_ENTRY(rotXSep, SoSeparator, FALSE,
topSeparator, geomSeparator,FALSE);
SO_KIT_ADD_CATALOG_ENTRY(rotX, SoRotation, TRUE,
rotXSep,\x0,FALSE);
SO_KIT_ADD_CATALOG_ENTRY(xzTranslatorSwitch, SoSwitch, FALSE,
rotXSep,\x0,FALSE);
SO_KIT_ADD_CATALOG_ENTRY(xzTranslator, SoTranslate2Dragger, TRUE,
xzTranslatorSwitch,\x0,TRUE);
SO_KIT_ADD_CATALOG_ENTRY(rotYSep, SoSeparator, FALSE,
topSeparator, geomSeparator,FALSE);
SO_KIT_ADD_CATALOG_ENTRY(rotY, SoRotation, TRUE,
rotYSep,\x0,FALSE);
SO_KIT_ADD_CATALOG_ENTRY(zTranslatorSwitch, SoSwitch, FALSE,
rotYSep,\x0,FALSE);
SO_KIT_ADD_CATALOG_ENTRY(zTranslator, SoTranslate1Dragger, TRUE,
zTranslatorSwitch,\x0,TRUE);
SO_KIT_ADD_CATALOG_ENTRY(yzTranslatorSwitch, SoSwitch, FALSE,
rotYSep,\x0,FALSE);
SO_KIT_ADD_CATALOG_ENTRY(yzTranslator, SoTranslate2Dragger, TRUE,
yzTranslatorSwitch,\x0,TRUE);
SO_KIT_ADD_CATALOG_ENTRY(rotZSep, SoSeparator, FALSE,
topSeparator, geomSeparator,FALSE);
SO_KIT_ADD_CATALOG_ENTRY(rotZ, SoRotation, TRUE,
rotZSep,\x0,FALSE);
SO_KIT_ADD_CATALOG_ENTRY(yTranslatorSwitch, SoSwitch, FALSE,
rotZSep,\x0,FALSE);
SO_KIT_ADD_CATALOG_ENTRY(yTranslator, SoTranslate1Dragger, TRUE,
yTranslatorSwitch,\x0,TRUE);
SO_KIT_ADD_CATALOG_ENTRY(xFeedbackSwitch, SoSwitch, FALSE,
topSeparator, geomSeparator,FALSE);
SO_KIT_ADD_CATALOG_ENTRY(xFeedbackSep, SoSeparator, FALSE,
xFeedbackSwitch,\x0,FALSE);
SO_KIT_ADD_CATALOG_ENTRY(xFeedbackTranslation, SoTranslation, FALSE,
xFeedbackSep,\x0,FALSE);
SO_KIT_ADD_CATALOG_ENTRY(xFeedback, SoSeparator, TRUE,
xFeedbackSep,\x0,TRUE);
SO_KIT_ADD_CATALOG_ENTRY(yFeedbackSwitch, SoSwitch, FALSE,
topSeparator, geomSeparator,FALSE);
SO_KIT_ADD_CATALOG_ENTRY(yFeedbackSep, SoSeparator, FALSE,
yFeedbackSwitch,\x0,FALSE);
SO_KIT_ADD_CATALOG_ENTRY(yFeedbackTranslation, SoTranslation, FALSE,
yFeedbackSep,\x0,FALSE);
SO_KIT_ADD_CATALOG_ENTRY(yFeedback, SoSeparator, TRUE,
yFeedbackSep,\x0,TRUE);
SO_KIT_ADD_CATALOG_ENTRY(zFeedbackSwitch, SoSwitch, FALSE,
topSeparator, geomSeparator,FALSE);
SO_KIT_ADD_CATALOG_ENTRY(zFeedbackSep, SoSeparator, FALSE,
zFeedbackSwitch,\x0,FALSE);
SO_KIT_ADD_CATALOG_ENTRY(zFeedbackTranslation, SoTranslation, FALSE,
zFeedbackSep,\x0,FALSE);
SO_KIT_ADD_CATALOG_ENTRY(zFeedback, SoSeparator, TRUE,
zFeedbackSep,\x0,TRUE);
SO_KIT_ADD_CATALOG_ENTRY(planeFeedbackSep, SoSeparator, FALSE,
topSeparator, geomSeparator,FALSE);
SO_KIT_ADD_CATALOG_ENTRY(planeFeedbackTranslation, SoTranslation, FALSE,
planeFeedbackSep,\x0,FALSE);
SO_KIT_ADD_CATALOG_ENTRY(planeFeedbackSwitch, SoSwitch, FALSE,
planeFeedbackSep,\x0,FALSE);
SO_KIT_ADD_CATALOG_ENTRY(yzFeedback, SoSeparator, TRUE,
planeFeedbackSwitch,\x0,TRUE);
SO_KIT_ADD_CATALOG_ENTRY(xzFeedback, SoSeparator, TRUE,
planeFeedbackSwitch,\x0,TRUE);
SO_KIT_ADD_CATALOG_ENTRY(xyFeedback, SoSeparator, TRUE,
planeFeedbackSwitch,\x0,TRUE);
// read geometry for shared parts
if (SO_KIT_IS_FIRST_INSTANCE())
readDefaultParts("dragPointDragger.iv",geomBuffer,sizeof(geomBuffer) );
// The field that reflects where the dragger has been translated to
SO_KIT_ADD_FIELD(translation, (0.0, 0.0, 0.0));
SO_KIT_INIT_INSTANCE();
// Cached values to make updating the feedback geometry more efficient
oldXAxisNode = NULL;
oldYAxisNode = NULL;
oldZAxisNode = NULL;
//******************
// Set up the parts.
//******************
// Set up the rotations to orient the draggers correctly.
SoRotation *myRotX = new SoRotation;
SoRotation *myRotY = new SoRotation;
SoRotation *myRotZ = new SoRotation;
myRotX->rotation = SbRotation( SbVec3f(1,0,0), 1.57079 );
myRotY->rotation = SbRotation( SbVec3f(0,1,0), 1.57079 );
myRotZ->rotation = SbRotation( SbVec3f(0,0,1), 1.57079 );
setAnyPartAsDefault("rotX", myRotX );
setAnyPartAsDefault("rotY", myRotY );
setAnyPartAsDefault("rotZ", myRotZ );
// CREATE THE CHILD DRAGGERS.
// Create the translate1Draggers...
SoTranslate1Dragger *myXTrans, *myYTrans, *myZTrans;
myXTrans = SO_GET_ANY_PART(this,"xTranslator",SoTranslate1Dragger);
myYTrans = SO_GET_ANY_PART(this,"yTranslator",SoTranslate1Dragger);
myZTrans = SO_GET_ANY_PART(this,"zTranslator",SoTranslate1Dragger);
// Create the translate2Draggers...
SoTranslate2Dragger *myYZTrans, *myXZTrans, *myXYTrans;
myYZTrans = SO_GET_ANY_PART(this,"yzTranslator",SoTranslate2Dragger);
myXZTrans = SO_GET_ANY_PART(this,"xzTranslator",SoTranslate2Dragger);
myXYTrans = SO_GET_ANY_PART(this,"xyTranslator",SoTranslate2Dragger);
//******************
// The feedback parts jump around as the limit box changes. That is, they
// stay fixed in space while the dragger moves around.
// However, they jump to a new location when the dragger nears the edge.
// These parts a separate translation node, since they move differently
// than the dragger itself.
//******************
//******************
// The feedback parts jump around as the limit box changes. That is, they
// stay fixed in space while the dragger moves around.
// However, they jump to a new location when the dragger nears the edge.
// These parts a separate translation node, since they move differently
// than the dragger itself.
//
// Only one plane or one axis is shown at a time, depending on which
// translator has initiated the dragging.
//******************
setPartAsDefault("xFeedback", "dragPointXFeedback");
setPartAsDefault("yFeedback", "dragPointYFeedback");
setPartAsDefault("zFeedback", "dragPointZFeedback");
setPartAsDefault("yzFeedback", "dragPointYZFeedback");
setPartAsDefault("xzFeedback", "dragPointXZFeedback");
setPartAsDefault("xyFeedback", "dragPointXYFeedback");
//********************
// initialize state, limitbox, gesture variables
//********************
// To begin with, only the yTranslator and xzTranslators are turned on.
// You can switch between pairs of line/plane draggers by hitting the
// CONTROL key
setSwitchValue(xTranslatorSwitch.getValue(), SO_SWITCH_NONE );
setSwitchValue(yTranslatorSwitch.getValue(), 0 );
setSwitchValue(zTranslatorSwitch.getValue(), SO_SWITCH_NONE );
setSwitchValue(yzTranslatorSwitch.getValue(), SO_SWITCH_NONE );
setSwitchValue(xzTranslatorSwitch.getValue(), 0 );
setSwitchValue(xyTranslatorSwitch.getValue(), SO_SWITCH_NONE );
// ??? Would be cool to be able to choose a free
// axis, rotate it around to whatever direction, maybe even
// have it snap to things in the scene, then constrain
// dragging to that line.
// Start off inactive
currentDragger = NULL;
// The state of the modifier keys
shftDown = FALSE;
// Need to initialize since checkBoxLimits will look at it...
startLocalHitPt.setValue(0,0,0);
// The jump axes will jump when the edit point gets within
// 10% of their ends
jumpLimit = .1;
// makes the offsetWorkLimit box
limitBox.makeEmpty();
updateLimitBoxAndFeedback();
// These will be called by the child draggers after they call
// their own callbacks...
addStartCallback( &SoDragPointDragger::startCB );
addMotionCallback( &SoDragPointDragger::motionCB );
addFinishCallback( &SoDragPointDragger::finishCB );
// When modify keys are released, we need to turn off any constraints.
addOtherEventCallback( &SoDragPointDragger::metaKeyChangeCB );
// Updates the translation field when the motionMatrix is set.
addValueChangedCallback( &SoDragPointDragger::valueChangedCB );
// Updates the motionMatrix when the translation field is set.
fieldSensor = new SoFieldSensor( &SoDragPointDragger::fieldSensorCB, this);
fieldSensor->setPriority( 0 );
setUpConnections( TRUE, TRUE );
}
/*!
\DRAGGER_CONSTRUCTOR
\NODEKIT_PRE_DIAGRAM
\verbatim
CLASS SoCenterballDragger
-->"this"
"callbackList"
"topSeparator"
"motionMatrix"
--> "translateToCenter"
--> "surroundScale"
--> "antiSquish"
--> "lightModel"
"geomSeparator"
--> "XAxisSwitch"
--> "XAxis"
--> "YAxisSwitch"
--> "YAxis"
--> "ZAxisSwitch"
--> "ZAxis"
--> "rotator"
--> "YRotator"
--> "ZCenterChanger"
--> "rotX90"
--> "ZRotator"
--> "YCenterChanger"
--> "rotY90"
--> "XCenterChanger"
--> "rot2X90"
--> "XRotator"
\endverbatim
\NODEKIT_POST_DIAGRAM
\NODEKIT_PRE_TABLE
\verbatim
CLASS SoCenterballDragger
PVT "this", SoCenterballDragger ---
"callbackList", SoNodeKitListPart [ SoCallback, SoEventCallback ]
PVT "topSeparator", SoSeparator ---
PVT "motionMatrix", SoMatrixTransform ---
"translateToCenter", SoMatrixTransform ---
"surroundScale", SoSurroundScale ---
"antiSquish", SoAntiSquish ---
"lightModel", SoLightModel ---
PVT "geomSeparator", SoSeparator ---
"rotator", SoRotateSphericalDragger ---
"YRotator", SoRotateCylindricalDragger ---
"ZCenterChanger", SoTranslate2Dragger ---
PVT "rotX90", SoRotation ---
"ZRotator", SoRotateCylindricalDragger ---
"YCenterChanger", SoTranslate2Dragger ---
PVT "rotY90", SoRotation ---
"XCenterChanger", SoTranslate2Dragger ---
PVT "rot2X90", SoRotation ---
PVT "XAxisSwitch", SoSwitch ---
"XAxis", SoSeparator ---
PVT "YAxisSwitch", SoSwitch ---
"YAxis", SoSeparator ---
PVT "ZAxisSwitch", SoSwitch ---
"ZAxis", SoSeparator ---
"XRotator", SoRotateCylindricalDragger ---
\endverbatim
\NODEKIT_POST_TABLE
*/
SoCenterballDragger::SoCenterballDragger(void)
{
SO_KIT_INTERNAL_CONSTRUCTOR(SoCenterballDragger);
SO_KIT_ADD_CATALOG_ENTRY(XAxis, SoSeparator, TRUE, XAxisSwitch, "", TRUE);
SO_KIT_ADD_CATALOG_ENTRY(XAxisSwitch, SoSwitch, TRUE, geomSeparator, YAxisSwitch, FALSE);
SO_KIT_ADD_CATALOG_ENTRY(XCenterChanger, SoTranslate2Dragger, TRUE, topSeparator, rot2X90, TRUE);
SO_KIT_ADD_CATALOG_ENTRY(XRotator, SoRotateCylindricalDragger, TRUE, topSeparator, "", TRUE);
SO_KIT_ADD_CATALOG_ENTRY(YAxis, SoSeparator, TRUE, YAxisSwitch, "", TRUE);
SO_KIT_ADD_CATALOG_ENTRY(YAxisSwitch, SoSwitch, TRUE, geomSeparator, ZAxisSwitch, FALSE);
SO_KIT_ADD_CATALOG_ENTRY(YCenterChanger, SoTranslate2Dragger, TRUE, topSeparator, rotY90, TRUE);
SO_KIT_ADD_CATALOG_ENTRY(YRotator, SoRotateCylindricalDragger, TRUE, topSeparator, ZCenterChanger, TRUE);
SO_KIT_ADD_CATALOG_ENTRY(ZAxis, SoSeparator, TRUE, ZAxisSwitch, "", TRUE);
SO_KIT_ADD_CATALOG_ENTRY(ZAxisSwitch, SoSwitch, TRUE, geomSeparator, "", FALSE);
SO_KIT_ADD_CATALOG_ENTRY(ZCenterChanger, SoTranslate2Dragger, TRUE, topSeparator, rotX90, TRUE);
SO_KIT_ADD_CATALOG_ENTRY(ZRotator, SoRotateCylindricalDragger, TRUE, topSeparator, YCenterChanger, TRUE);
SO_KIT_ADD_CATALOG_ENTRY(antiSquish, SoAntiSquish, FALSE, topSeparator, lightModel, TRUE);
SO_KIT_ADD_CATALOG_ENTRY(lightModel, SoLightModel, TRUE, topSeparator, geomSeparator, TRUE);
SO_KIT_ADD_CATALOG_ENTRY(rot2X90, SoRotation, TRUE, topSeparator, XRotator, FALSE);
SO_KIT_ADD_CATALOG_ENTRY(rotX90, SoRotation, TRUE, topSeparator, ZRotator, FALSE);
SO_KIT_ADD_CATALOG_ENTRY(rotY90, SoRotation, TRUE, topSeparator, XCenterChanger, FALSE);
SO_KIT_ADD_CATALOG_ENTRY(rotator, SoRotateSphericalDragger, TRUE, topSeparator, YRotator, TRUE);
SO_KIT_ADD_CATALOG_ENTRY(surroundScale, SoSurroundScale, TRUE, topSeparator, antiSquish, TRUE);
SO_KIT_ADD_CATALOG_ENTRY(translateToCenter, SoMatrixTransform, TRUE, topSeparator, surroundScale, TRUE);
if (SO_KIT_IS_FIRST_INSTANCE()) {
SoInteractionKit::readDefaultParts("centerballDragger.iv",
CENTERBALLDRAGGER_draggergeometry,
static_cast<int>(strlen(CENTERBALLDRAGGER_draggergeometry)));
}
SO_KIT_ADD_FIELD(rotation, (SbRotation(SbVec3f(0.0f, 0.0f, 1.0f), 0.0f)));
SO_KIT_ADD_FIELD(center, (0.0f, 0.0f, 0.0f));
SO_KIT_INIT_INSTANCE();
// create subdraggers
SO_GET_ANY_PART(this, "XCenterChanger", SoTranslate2Dragger);
SO_GET_ANY_PART(this, "YCenterChanger", SoTranslate2Dragger);
SO_GET_ANY_PART(this, "ZCenterChanger", SoTranslate2Dragger);
SO_GET_ANY_PART(this, "XRotator", SoRotateCylindricalDragger);
SO_GET_ANY_PART(this, "YRotator", SoRotateCylindricalDragger);
SO_GET_ANY_PART(this, "ZRotator", SoRotateCylindricalDragger);
SO_GET_ANY_PART(this, "rotator", SoRotateSphericalDragger);
// create default parts
this->setPartAsDefault("XAxis", "centerballXAxis");
this->setPartAsDefault("YAxis", "centerballYAxis");
this->setPartAsDefault("ZAxis", "centerballZAxis");
// initialize some nodes
SoRotation *rot;
rot = SO_GET_ANY_PART(this, "rot2X90", SoRotation);
rot->rotation = SbRotation(SbVec3f(1.0f, 0.0f, 0.0f), (static_cast<float>(M_PI))*0.5f);
rot = SO_GET_ANY_PART(this, "rotX90", SoRotation);
rot->rotation = SbRotation(SbVec3f(1.0f, 0.0f, 0.0f), (static_cast<float>(M_PI))*0.5f);
rot = SO_GET_ANY_PART(this, "rotY90", SoRotation);
rot->rotation = SbRotation(SbVec3f(0.0f, 1.0f, 0.0f), (static_cast<float>(M_PI))*0.5f);
// reset default flags for parts we set to a default value
this->rot2X90.setDefault(TRUE);
this->rotX90.setDefault(TRUE);
this->rotY90.setDefault(TRUE);
SoAntiSquish *squish = SO_GET_ANY_PART(this, "antiSquish", SoAntiSquish);
squish->sizing = SoAntiSquish::LONGEST_DIAGONAL;
squish->recalcAlways = FALSE;
SoMatrixTransform *mt = SO_GET_ANY_PART(this, "translateToCenter", SoMatrixTransform);
mt->matrix = SbMatrix::identity();
this->addValueChangedCallback(SoCenterballDragger::valueChangedCB);
this->rotFieldSensor = new SoFieldSensor(SoCenterballDragger::fieldSensorCB, this);
this->centerFieldSensor = new SoFieldSensor(SoCenterballDragger::fieldSensorCB, this);
this->setUpConnections(TRUE, TRUE);
}
TranslateRadialDragger::
TranslateRadialDragger()
{
SO_KIT_CONSTRUCTOR(TranslateRadialDragger);
SO_KIT_ADD_CATALOG_ENTRY(validitySwitch, SoBlinker, TRUE,
geomSeparator, , FALSE);
SO_KIT_ADD_CATALOG_ENTRY(materialSwitch, SoSwitch, TRUE,
validitySwitch, , FALSE);
// Put this under geomSeparator so it draws efficiently.
SO_KIT_ADD_CATALOG_ENTRY(translatorSwitch, SoSwitch, TRUE,
geomSeparator, , FALSE);
SO_KIT_ADD_CATALOG_ENTRY(translator, SoSeparator, TRUE,
translatorSwitch, , TRUE);
SO_KIT_ADD_CATALOG_ENTRY(translatorActive, SoSeparator, TRUE,
translatorSwitch, , TRUE);
SO_KIT_ADD_CATALOG_ENTRY(feedbackRotate, SoRotation, TRUE,
geomSeparator, , TRUE);
SO_KIT_ADD_CATALOG_ENTRY(feedbackSwitch, SoSwitch, TRUE,
geomSeparator, , FALSE);
SO_KIT_ADD_CATALOG_ENTRY(feedback, SoSeparator, TRUE,
feedbackSwitch, , TRUE);
SO_KIT_ADD_CATALOG_ENTRY(feedbackActive, SoSeparator, TRUE,
feedbackSwitch, , TRUE);
SO_KIT_ADD_CATALOG_ENTRY(materialPlaced, SoMaterial, TRUE,
materialSwitch, , TRUE);
SO_KIT_ADD_CATALOG_ENTRY(materialNormal, SoMaterial, TRUE,
materialSwitch, , TRUE);
SO_KIT_ADD_CATALOG_ENTRY(materialActive, SoMaterial, TRUE,
materialSwitch, , TRUE);
SO_KIT_ADD_CATALOG_ENTRY(materialInvalid, SoMaterial, TRUE,
validitySwitch, , TRUE);
// Read geometry resources. Only do this the first time we
// construct one. 'geomBuffer' contains our compiled in
// defaults. The user can override these by specifying new
// scene graphs in the file:
// $(SO_DRAGGER_DIR)/translateRadialDragger.iv
if(SO_KIT_IS_FIRST_INSTANCE())
readDefaultParts("translateRadialDragger.iv", geomBuffer,
sizeof(geomBuffer) - 1);
// Field that always shows current position of the dragger.
SO_KIT_ADD_FIELD(translation, (0.0, 0.0, 0.0));
// Creates the parts list for this nodekit
SO_KIT_INIT_INSTANCE();
// Create the parts of the dragger. This dragger has five
// parts that we need to create: "translator",
// "translatorActive", "feedback," and "feedbackActive" will
// be created using the resource mechanism. They are looked
// up in the global dictionary.
// "rotator," used to position the feedback so it points in
// the direction selected by the user, will just be a plain
// old SoRotation node.
// We call 'setPartAsDefault' because we are installing
// default geometries from the resource files. By calling
// 'setPartAsDefault' instead of 'setPart', we insure that
// these parts will not write to file unless they are
// changed later.
setPartAsDefault("translator",
"translateRadialTranslator");
setPartAsDefault("translatorActive",
"translateRadialTranslatorActive");
setPartAsDefault("feedback",
"translateRadialFeedback");
setPartAsDefault("feedbackActive",
"translateRadialFeedbackActive");
setPartAsDefault("materialNormal",
"translateNormalMaterial");
setPartAsDefault("materialActive",
"translateActiveMaterial");
setPartAsDefault("materialPlaced",
"translatePlacedMaterial");
setPartAsDefault("materialInvalid",
"translateInvalidMaterial");
// Set the switch parts to 0 to display the inactive parts.
// The parts "translatorSwitch" and "feedbackSwitch"
// are not public parts. (i.e., when making the catalog, the
// isPublic flag was set FALSE, so users cannot access them)
// To retrieve the parts we must use the SO_GET_ANY_PART
// macro which calls the protected method getAnyPart().
SoSwitch *sw;
sw = SO_GET_ANY_PART(this, "translatorSwitch", SoSwitch);
setSwitchValue(sw, 0);
sw = SO_GET_ANY_PART(this, "feedbackSwitch", SoSwitch);
setSwitchValue(sw, 0);
sw = SO_GET_ANY_PART(this, "materialSwitch", SoSwitch);
setSwitchValue(sw, 0);
sw = SO_GET_ANY_PART(this, "validitySwitch", SoBlinker);
setSwitchValue(sw, 0);
// This dragger does motion along a line,
// so we create a line projector.
lineProj = new SbLineProjector();
// Add the callback functions that will be called when
// the user clicks, drags, and releases.
addStartCallback(&TranslateRadialDragger::startCB);
addMotionCallback(&TranslateRadialDragger::motionCB);
addFinishCallback(&TranslateRadialDragger::finishCB);
// Updates the translation field when the dragger moves.
addValueChangedCallback(&TranslateRadialDragger::valueChangedCB);
// Updates the motionMatrix (and thus moves the dragger
// through space) to a new location whenever the translation
// field is changed from the outside.
fieldSensor = new SoFieldSensor(
&TranslateRadialDragger::fieldSensorCB, this);
fieldSensor->setPriority(0);
setUpConnections(TRUE, TRUE);
}
