void SPI_RTCWriteTime(RTC_TIME Time)
{
BYTE Cmd;
Cmd = RTC_SECONDS | WRITEMASK;
SPISendData(RTCDeviceHandle, &Cmd, 1, (BYTE*)&Time, sizeof(RTC_TIME));
}
/*****************************************************************************
Function:
void SPIRTCSRAMWriteArray(BYTE* vData, WORD wLen)
Summary:
Writes an array of bytes to the SPI Flash part.
Description:
This function writes an array of bytes to the SPI SRAM part.
Precondition:
SPIRTCSRAMInit and SPIRTCSRAMBeginWrite have been called.
Parameters:
vData - The array to write to the next memory location
wLen - The length of the data to be written
Returns:
None
Remarks:
See Remarks in SPIRTCSRAMBeginWrite for important information about Flash
memory parts.
***************************************************************************/
void SPI_RTC_SRAMWriteArray(BYTE bAddress, BYTE *vData, WORD wLength)
{
BYTE Cmd[2];
// Ignore operations when the destination is NULL or nothing to read
if(vData == NULL || wLength == 0)
return;
Cmd[0] = SRAM_ADDRES | WRITEMASK;
Cmd[1] = bAddress;
SPISendCmd(RTCDeviceHandle, Cmd, 2);
Cmd[0] = SRAM_DATA | WRITEMASK;
SPISendData(RTCDeviceHandle, Cmd, 1, vData, wLength);
}
/**
* @brief Main program
* @param None
* @retval None
*/
int main(void) {
__IO uint16_t i;
__IO uint16_t *ptr;
__IO uint16_t tmp1;
__IO uint16_t tmp2;
uint32_t scpcnt;
uint32_t scpwait;
uint32_t scptpos;
/* RCC Configuration */
RCC_Config();
/* GPIO Configuration */
GPIO_Config();
/* TIM Configuration */
TIM_Config();
/* NVIC Configuration */
NVIC_Config();
/* DAC Configuration */
DAC_Config();
/* SPI Configuration */
SPI_Config();
/* USART Configuration */
USART_Config(115200);
/* Calibrate LC Meter */
LCM_Calibrate();
// /* Update bluetooth baudrate */
// STM32_CMD.Cmd = STM32_CMD.TickCount;
// while (STM32_CMD.Cmd == STM32_CMD.TickCount);
// STM32_CMD.Cmd = STM32_CMD.TickCount;
// while (STM32_CMD.Cmd == STM32_CMD.TickCount);
// USART3_puts("AT\0");
// STM32_CMD.Cmd = STM32_CMD.TickCount;
// while (STM32_CMD.Cmd == STM32_CMD.TickCount)
// {
// if ((USART3->SR & USART_FLAG_RXNE) != 0)
// {
// STM32_CMD.BTBuff[i] = USART3->DR;
// i++;
// }
// }
// STM32_CMD.Cmd = STM32_CMD.TickCount;
// while (STM32_CMD.Cmd == STM32_CMD.TickCount);
// STM32_CMD.Cmd = STM32_CMD.TickCount;
// while (STM32_CMD.Cmd == STM32_CMD.TickCount);
// USART3_puts("AT+BAUD8\0");
// STM32_CMD.Cmd = STM32_CMD.TickCount;
// while (STM32_CMD.Cmd == STM32_CMD.TickCount)
// {
// if ((USART3->SR & USART_FLAG_RXNE) != 0)
// {
// STM32_CMD.BTBuff[i] = USART3->DR;
// i++;
// }
// }
// while (1)
// {
// }
while (1) {
USART3_getdata((uint8_t *)&STM32_CMD.Cmd,4);
switch (STM32_CMD.Cmd)
{
case CMD_LCMCAL:
LCM_Calibrate();
USART3_putdata((uint8_t *)&STM32_CMD.STM32_LCM.FrequencyCal0,sizeof(STM32_LCMTypeDef));
break;
case CMD_LCMCAP:
GPIO_ResetBits(GPIOD, GPIO_Pin_0 | GPIO_Pin_1 | GPIO_Pin_2 | GPIO_Pin_6 | GPIO_Pin_7);
USART3_putdata((uint8_t *)&STM32_CMD.STM32_FRQ.Frequency,sizeof(STM32_FRQTypeDef));
USART3_putdata((uint8_t *)&STM32_CMD.STM32_LCM.FrequencyCal0,sizeof(STM32_LCMTypeDef));
break;
case CMD_LCMIND:
GPIO_ResetBits(GPIOD, GPIO_Pin_0 | GPIO_Pin_1 | GPIO_Pin_2 | GPIO_Pin_7);
GPIO_SetBits(GPIOD, GPIO_Pin_6);
USART3_putdata((uint8_t *)&STM32_CMD.STM32_FRQ.Frequency,sizeof(STM32_FRQTypeDef));
USART3_putdata((uint8_t *)&STM32_CMD.STM32_LCM.FrequencyCal0,sizeof(STM32_LCMTypeDef));
break;
case CMD_FRQCH1:
GPIO_ResetBits(GPIOD, GPIO_Pin_1 | GPIO_Pin_2 | GPIO_Pin_6 | GPIO_Pin_7);
GPIO_SetBits(GPIOD, GPIO_Pin_0);
USART3_putdata((uint8_t *)&STM32_CMD.STM32_FRQ.Frequency,sizeof(STM32_FRQTypeDef));
break;
case CMD_FRQCH2:
GPIO_ResetBits(GPIOD, GPIO_Pin_0 | GPIO_Pin_2 | GPIO_Pin_6 | GPIO_Pin_7);
GPIO_SetBits(GPIOD, GPIO_Pin_1);
USART3_putdata((uint8_t *)&STM32_CMD.STM32_FRQ.Frequency,sizeof(STM32_FRQTypeDef));
break;
case CMD_FRQCH3:
GPIO_ResetBits(GPIOD, GPIO_Pin_2 | GPIO_Pin_6 | GPIO_Pin_7);
GPIO_SetBits(GPIOD, GPIO_Pin_0 | GPIO_Pin_1);
USART3_putdata((uint8_t *)&STM32_CMD.STM32_FRQ.Frequency,sizeof(STM32_FRQTypeDef));
break;
case CMD_SCPSET:
USART3_putdata((uint8_t *)&STM32_CMD.STM32_FRQ.Frequency,sizeof(STM32_FRQTypeDef));
USART3_getdata((uint8_t *)&STM32_CMD.STM32_SCP.ADC_Prescaler,sizeof(STM32_SCPTypeDef));
/* Scope magnify */
i = (STM32_CMD.STM32_SCP.ScopeMag & 0x07) << 3;
GPIO_SetBits(GPIOE,(i ^ 0x38));
GPIO_ResetBits(GPIOE,i);
/* Set V-Pos */
DAC_SetChannel1Data(DAC_Align_12b_R, STM32_CMD.STM32_SCP.ScopeVPos);
/* Set Trigger level */
DAC_SetChannel2Data(DAC_Align_12b_R, STM32_CMD.STM32_SCP.ScopeTriggerLevel);
if (STM32_CMD.STM32_SCP.ADC_TripleMode) {
/* DMA Configuration */
DMA_TripleConfig(STM32_CMD.STM32_SCP.ADC_SampleSize);
/* ADC Configuration */
ADC_TripleConfig(STM32_CMD.STM32_SCP.ADC_Prescaler, STM32_CMD.STM32_SCP.ADC_TwoSamplingDelay);
} else {
/* DMA Configuration */
DMA_SingleConfig(STM32_CMD.STM32_SCP.ADC_SampleSize);
/* ADC Configuration */
ADC_SingleConfig(STM32_CMD.STM32_SCP.ADC_Prescaler,STM32_CMD.STM32_SCP.ADC_SampleTime);
}
if (STM32_CMD.STM32_SCP.ScopeTrigger == 2) {
/* Rising edge */
TIM5->CCER &= ~0x2;
} else {
/* Falling edge */
TIM5->CCER |= 0x2;
}
if (STM32_CMD.STM32_SCP.ScopeTrigger) {
/* Wait for trigger */
scpcnt = TIM5->CNT;
scpwait = STM32_CMD.TickCount + 2;
while (scpcnt == TIM5->CNT && scpwait != STM32_CMD.TickCount);
}
/* Start ADC1 Software Conversion */
ADC1->CR2 |= (uint32_t)ADC_CR2_SWSTART;
i = 0;
while (i < 30000) {
i++;
}
/* Since BlueTooth is slower than the lowest sampling rate there is no need to wait */
SendCompressedBuffer((uint32_t *)SCOPE_DATAPTR, STM32_CMD.STM32_SCP.ADC_SampleSize / 4);
/* Done */
ADC->CCR=0;
ADC1->CR2=0;
ADC2->CR2=0;
ADC3->CR2=0;
break;
case CMD_SCP2SET:
STM_EVAL_LEDToggle(LED4);
USART3_putdata((uint8_t *)&STM32_CMD.STM32_FRQ.Frequency,sizeof(STM32_FRQTypeDef));
USART3_getdata((uint8_t *)&STM32_CMD.STM32_SCP2.SampleRateSet,sizeof(STM32_SCP2TypeDef));
/* Scope magnify */
i = ((uint32_t)STM32_CMD.STM32_SCP2.Mag & 0x07) << 3;
GPIO_SetBits(GPIOE,(i ^ 0x38));
GPIO_ResetBits(GPIOE,i);
/* Set V-Pos */
DAC_SetChannel1Data(DAC_Align_12b_R, STM32_CMD.STM32_SCP2.VPos);
/* Set Trigger level */
DAC_SetChannel2Data(DAC_Align_12b_R, STM32_CMD.STM32_SCP2.TriggerLevel);
/* Get number of samples needed */
SampleSize = GetScopeSampleSize();
if (STM32_CMD.STM32_SCP2.Triple) {
/* DMA Configuration */
DMA_TripleConfig(SampleSize);
/* ADC Configuration */
ADC_TripleConfig((uint32_t)STM32_CMD.STM32_SCP2.SampleRateSet >> 4,(uint32_t)STM32_CMD.STM32_SCP2.SampleRateSet & 0xF);
} else {
/* DMA Configuration */
DMA_SingleConfig(SampleSize);
/* ADC Configuration */
ADC_SingleConfig(((uint32_t)STM32_CMD.STM32_SCP2.SampleRateSet >> 3) & 0x3,(uint32_t)STM32_CMD.STM32_SCP2.SampleRateSet & 0x7);
}
/* Trigger configuration */
if (STM32_CMD.STM32_SCP2.Trigger == 2) {
/* Rising edge */
TIM5->CCER &= ~0x2;
} else {
/* Falling edge */
TIM5->CCER |= 0x2;
}
if (STM32_CMD.STM32_SCP2.Trigger) {
/* Wait for trigger */
scpcnt = TIM5->CNT;
scpwait = STM32_CMD.TickCount + 2;
while (scpcnt == TIM5->CNT && scpwait != STM32_CMD.TickCount);
}
/* Start ADC1 Software Conversion */
ADC1->CR2 |= (uint32_t)ADC_CR2_SWSTART;
/* Reset wavedata */
ScopeResetWave((uint32_t *)SCOPE_WAVEPTR,SCOPE_MAXWAVESIZE);
ScopeResetWave((uint32_t *)SCOPE_COUNTPTR,SCOPE_MAXWAVESIZE);
/* Wait until DMA transfer complete */
while (DMA_GetFlagStatus(DMA2_Stream0, DMA_FLAG_TCIF0) == RESET);
/* Done sampling */
ADC->CCR=0;
ADC1->CR2=0;
ADC2->CR2=0;
ADC3->CR2=0;
ScopeSetWaveData((uint32_t *)SCOPE_WAVEPTR, (uint32_t *)SCOPE_COUNTPTR, (uint16_t *)SCOPE_DATAPTR);
scptpos = 0;
if (STM32_CMD.STM32_SCP2.Trigger) {
scptpos = ScopeFindTrigger((uint16_t *)SCOPE_DATAPTR);
}
/* Send wave data */
SendCompressedBuffer((uint32_t *)(SCOPE_DATAPTR + scptpos * 2), (uint32_t)STM32_CMD.STM32_SCP2.PixDiv * (uint32_t)STM32_CMD.STM32_SCP2.nDiv * 2 / 4);
STM_EVAL_LEDToggle(LED4);
break;
case CMD_HSCSET:
GPIO_ResetBits(GPIOD, GPIO_Pin_1 | GPIO_Pin_2 | GPIO_Pin_6 | GPIO_Pin_7);
GPIO_SetBits(GPIOD, GPIO_Pin_0);
USART3_getdata((uint8_t *)&STM32_CMD.STM32_HSC.HSCSet,sizeof(STM32_HSCTypeDef));
TIM4->ARR = STM32_CMD.STM32_HSC.HSCSet;
TIM4->CCR2 = (STM32_CMD.STM32_HSC.HSCSet+1) / 2;
TIM4->PSC = STM32_CMD.STM32_HSC.HSCDiv;
USART3_putdata((uint8_t *)&STM32_CMD.STM32_FRQ.Frequency,sizeof(STM32_FRQTypeDef));
break;
case CMD_DDSSET:
USART3_getdata((uint8_t *)&STM32_CMD.STM32_DDS.DDS_Cmd,sizeof(STM32_DDSTypeDef));
if (STM32_CMD.STM32_DDS.DDS_Cmd == DDS_PHASESET) {
SPISendData(DDS_PHASESET);
SPISendData32(STM32_CMD.STM32_DDS.DDS__PhaseAdd);
}
else if (STM32_CMD.STM32_DDS.DDS_Cmd == DDS_WAVESET) {
SPISendData(DDS_WAVESET);
SPISendData(STM32_CMD.STM32_DDS.DDS_Wave);
SPISendData(STM32_CMD.STM32_DDS.DDS_Amplitude);
SPISendData(STM32_CMD.STM32_DDS.DDS_DCOffset);
} else if (STM32_CMD.STM32_DDS.DDS_Cmd == DDS_SWEEPSET) {
SPISendData(DDS_SWEEPSET);
SPISendData(STM32_CMD.STM32_DDS.SWEEP_Mode);
SPISendData(STM32_CMD.STM32_DDS.SWEEP_Time);
SPISendData32(STM32_CMD.STM32_DDS.SWEEP_Step);
SPISendData32(STM32_CMD.STM32_DDS.SWEEP_Min);
SPISendData32(STM32_CMD.STM32_DDS.SWEEP_Max);
}
break;
case CMD_LGASET:
USART3_getdata((uint8_t *)&STM32_CMD.STM32_LGA.DataBlocks,sizeof(STM32_LGATypeDef));
/* Set the Prescaler value */
TIM8->PSC = STM32_CMD.STM32_LGA.LGASampleRateDiv;
/* Set the Autoreload value */
TIM8->ARR = STM32_CMD.STM32_LGA.LGASampleRate;
TIM8->CNT = STM32_CMD.STM32_LGA.LGASampleRate-1;
DMA_LGAConfig();
TIM_DMACmd(TIM8, TIM_DMA_Update, ENABLE);
/* DMA2_Stream1 enable */
DMA_Cmd(DMA2_Stream1, ENABLE);
/* Enable timer */
TIM8->CR1 |= TIM_CR1_CEN;
while (DMA_GetFlagStatus(DMA2_Stream1,DMA_FLAG_HTIF1) == RESET);
/* Half done */
USART3_putdata((uint8_t *)LGA_DATAPTR, STM32_CMD.STM32_LGA.DataBlocks * 1024 / 2);
while (DMA_GetFlagStatus(DMA2_Stream1,DMA_FLAG_TCIF1) == RESET);
/* Done */
USART3_putdata((uint8_t *)(LGA_DATAPTR + STM32_CMD.STM32_LGA.DataBlocks * 1024 / 2), STM32_CMD.STM32_LGA.DataBlocks * 1024 / 2);
TIM_Cmd(TIM8, DISABLE);
DMA_DeInit(DMA2_Stream1);
break;
case CMD_WAVEUPLOAD:
USART3_getdata((uint8_t *)WAVE_DATAPTR,4096);
SPISendData(DDS_WAVEUPLOAD);
ptr = (uint16_t *)WAVE_DATAPTR;
i = 2048;
while (i--) {
SPISendData(*ptr);
ptr++;
}
STM_EVAL_LEDToggle(LED4);
break;
}
void SPI_RTCWriteRegister(BYTE bAddress, BYTE vData)
{
BYTE Cmd;
Cmd = bAddress | WRITEMASK;
SPISendData(RTCDeviceHandle, &Cmd, 1, &vData, 1);
}
static void M25P16WriteRegister(uint8_t Value)
{
SPISendData(&FLASH_SPI, &Value, 1);
}
