/**
* @brief Display Init (LCD)
* @param None
* @retval None
*/
void Display_Init(void)
{
/* Initialize the LCD */
STM32303C_LCD_Init();
/* Clear the LCD */
LCD_Clear(White);
/* Set the LCD Text size */
LCD_SetFont(&Font8x12);
/* Set the LCD Back Color and Text Color*/
LCD_SetBackColor(Blue);
LCD_SetTextColor(White);
/* Display */
LCD_DisplayStringLine(LINE(0x13), (uint8_t*)" ADC conversion example (Diff example)");
/* Set the LCD Text size */
LCD_SetFont(&Font16x24);
LCD_DisplayStringLine(LINE(0), (uint8_t*)"STM32F303x CortexM4 ");
LCD_DisplayStringLine(LINE(1), (uint8_t*)" STM32303C-EVAL ");
/* Set the LCD Back Color and Text Color*/
LCD_SetBackColor(White);
LCD_SetTextColor(Blue);
/* Display */
LCD_DisplayStringLine(LINE(3),(uint8_t*)" Turn RV2(PC.01) ");
LCD_DisplayStringLine(LINE(4),(uint8_t*)" Potentiometer ");
}
/**
* @brief Main program.
* @param None
* @retval None
*/
void COMP_PulseWidthMeasurement(void)
{
/*!< At this stage the microcontroller clock setting is already configured,
this is done through SystemInit() function which is called from startup
file (startup_stm32f30x.s) before to branch to application main.
To reconfigure the default setting of SystemInit() function, refer to
system_stm32f30x.c file
*/
/* Initialize the TFT-LCD */
STM32303C_LCD_Init();
/* Clear the TFT-LCD */
LCD_Clear(LCD_COLOR_WHITE);
/* DAC Channel1 configuration */
DAC_Config();
/* COMP1 Configuration */
COMP_Config();
/* TIM2 Configuration in input capture mode */
TIM_Config();
/* Displays PulseWidthMeasurement message on line 0 */
LCD_DisplayStringLine(LINE(0), (uint8_t *)MESSAGE1);
/* Infinite loop */
while (1)
{
if (DisplayActive != 0)
{
/* Compute the pulse width in us */
MeasuredPulse = (uint32_t)(((uint64_t) Capture * 1000000) / ((uint32_t)SystemCoreClock));
/* Display measured pulse width on LCD */
LCD_Display(MeasuredPulse);
DisplayActive = 0;
}
}
}
/**
* @brief Main program.
* @param None
* @retval None
*/
void SPI_EEPROM_Example(void)
{
/*!< At this stage the microcontroller clock setting is already configured,
this is done through SystemInit() function which is called from startup
file (startup_stm32f30x.s) before to branch to application main.
To reconfigure the default setting of SystemInit() function, refer to
system_stm32f30x.c file
*/
/* Initialize the SPI EEPROM driver ----------------------------------------*/
sEE_Init();
/* First write in the memory followed by a read of the written data --------*/
/* Write on SPI EEPROM from sEE_WRITE_ADDRESS1 */
sEE_WriteBuffer(Tx1Buffer, sEE_WRITE_ADDRESS1, BUFFER_SIZE1);
/* Wait for EEPROM standby state */
sEE_WaitEepromStandbyState();
/* Set the Number of data to be read */
NumDataRead = BUFFER_SIZE1;
/* Read from SPI EEPROM from sEE_READ_ADDRESS1 */
sEE_ReadBuffer(Rx1Buffer, sEE_READ_ADDRESS1, (uint16_t *)(&NumDataRead));
/* Check if the data written to the memory is read correctly */
TransferStatus1 = Buffercmp(Tx1Buffer, Rx1Buffer, BUFFER_SIZE1);
/* Second write in the memory followed by a read of the written data -------*/
/* Write on SPI EEPROM from sEE_WRITE_ADDRESS2 */
sEE_WriteBuffer(Tx2Buffer, sEE_WRITE_ADDRESS2, BUFFER_SIZE2);
/* Wait for EEPROM standby state */
sEE_WaitEepromStandbyState();
/* Set the Number of data to be read */
NumDataRead = BUFFER_SIZE2;
/* Read from SPI EEPROM from sEE_READ_ADDRESS2 */
sEE_ReadBuffer(Rx2Buffer, sEE_READ_ADDRESS2, (uint16_t *)(&NumDataRead));
/* Check if the data written to the memory is read correctly */
TransferStatus2 = Buffercmp(Tx2Buffer, Rx2Buffer, BUFFER_SIZE2);
#ifdef ENABLE_LCD_MSG_DISPLAY
/* Initialize the LCD screen for information display */
STM32303C_LCD_Init();
LCD_Clear(LCD_COLOR_BLUE);
LCD_SetBackColor(LCD_COLOR_BLUE);
LCD_SetTextColor(LCD_COLOR_WHITE);
LCD_DisplayStringLine(LCD_LINE_0, "SMT32F30x FW Library");
LCD_DisplayStringLine(LCD_LINE_1, " EEPROM Example ");
/* TransferStatus1 = PASSED, if the transmitted and received data
to/from the EEPROM are the same */
/* TransferStatus1 = FAILED, if the transmitted and received data
to/from the EEPROM are different */
if (TransferStatus1 == PASSED)
{
LCD_DisplayStringLine(LCD_LINE_3, " Transfer 1 PASSED ");
}
else
{
LCD_DisplayStringLine(LCD_LINE_3, " Transfer 1 FAILED ");
}
/* TransferStatus2 = PASSED, if the transmitted and received data
to/from the EEPROM are the same */
/* TransferStatus2 = FAILED, if the transmitted and received data
to/from the EEPROM are different */
if (TransferStatus2 == PASSED)
{
LCD_DisplayStringLine(LCD_LINE_5, " Transfer 2 PASSED ");
}
else
{
LCD_DisplayStringLine(LCD_LINE_5, " Transfer 2 FAILED ");
}
#endif /* ENABLE_LCD_MSG_DISPLAY */
/* Free all used resources */
sEE_DeInit();
while (1)
{
}
}
/**
* @brief Main program.
* @param None
* @retval None
*/
void CAN_FIFOExtension(void)
{
/*!< At this stage the microcontroller clock setting is already configured,
this is done through SystemInit() function which is called from startup
file (startup_stm32f30x.s) before to branch to application main.
To reconfigure the default setting of SystemInit() function, refer to
system_stm32f30x.c file
*/
/* Initialize the LCD */
STM32303C_LCD_Init();
/* Clear the LCD */
LCD_Clear(LCD_COLOR_WHITE);
/* Set the LCD Back Color */
LCD_SetBackColor(Blue);
/* Set the LCD Text Color */
LCD_SetTextColor(White);
/* Displays MESSAGE1 on line 0 */
LCD_DisplayStringLine(LINE(0), (uint8_t *)MESSAGE1);
LCD_SetFont(&Font12x12);
/* Display Messages on the the LCD */
LCD_DisplayStringLine(LINE(0x3), (uint8_t *)MESSAGE2);
/* Set the LCD Text size */
LCD_SetFont(&Font16x24);
/* Configure Push button key */
STM_EVAL_PBInit(BUTTON_KEY, BUTTON_MODE_GPIO);
/* CAN configuration */
CAN_Config();
/* Infinite loop */
while(1)
{
while(STM_EVAL_PBGetState(BUTTON_KEY) == KEY_PRESSED)
{
if(KeyNumber == 41) KeyNumber = 0;
Display_TransmittedMsg(KeyNumber);
KeyNumber++;
Delay();
while(STM_EVAL_PBGetState(BUTTON_KEY) != KEY_NOT_PRESSED)
{
}
}
if (MsgReceived != 0)
{
/* Display received the 6 messages on tghe LCD */
Display_ReceivedMsg();
MsgReceived = 0;
}
}
}
/**
* @brief Main program.
* @param None
* @retval None
*/
void RTC_StopWatch_Example(void)
{
/*!< At this stage the microcontroller clock setting is already configured,
this is done through SystemInit() function which is called from startup
file (startup_stm32f30x.s) before to branch to application main.
To reconfigure the default setting of SystemInit() function, refer to
system_stm32f30x.c file
*/
/* Initialize the LCD */
STM32303C_LCD_Init();
/* Clear the LCD */
LCD_Clear(LCD_COLOR_WHITE);
/* Set the LCD Back Color */
LCD_SetBackColor(Blue);
/* Set the LCD Text Color */
LCD_SetTextColor(White);
/* Displays MESSAGE1 on line 1 */
LCD_DisplayStringLine(LINE(0), (uint8_t *)MESSAGE1);
/* Set the LCD Text Color */
LCD_SetTextColor(Red);
/* Set the LCD Back Color */
LCD_SetBackColor(Red);
LCD_DrawFullRect(31, 292,264,34);
/* Set the LCD Back Color */
LCD_SetBackColor(White);
LCD_DrawFullRect(33, 290 ,260,30);
/* Configure the external interrupt "SEL", "RIGHT" and "LEFT" buttons */
STM_EVAL_PBInit(BUTTON_RIGHT,BUTTON_MODE_EXTI);
STM_EVAL_PBInit(BUTTON_LEFT,BUTTON_MODE_EXTI);
STM_EVAL_PBInit(BUTTON_SEL,BUTTON_MODE_GPIO);
/* Configure the RTC peripheral by selecting the clock source.*/
RTC_Config();
/* Set the LCD Text, Back Colors and Text size */
LCD_SetTextColor(Black);
LCD_SetBackColor(Cyan);
LCD_SetFont(&Font12x12);
LCD_DisplayStringLine(LINE(18), (uint8_t *)MESSAGE2);
/* Set the LCD Back Color */
LCD_SetBackColor(Blue);
LCD_SetTextColor(White);
LCD_DisplayStringLine(LINE(19), (uint8_t *)MESSAGE3);
/* Set text size */
LCD_SetFont(&Font16x24);
/* Set the LCD Text Color */
LCD_SetTextColor(Blue);
/* Initialize time Stucture */
RTC_TimeStructInit(&RTC_TimeStruct);
/* Infinite loop */
while (1)
{
/* Set the LCD Back Color and text size */
LCD_SetFont(&Font16x24);
LCD_SetBackColor(White);
/* Check on the event 'start' */
if(StartEvent != 0x0)
{
/* Get the RTC sub second fraction */
SecondFraction = (((256 - (uint32_t)RTC_GetSubSecond()) * 1000) / 256);
/* Get the Curent time */
RTC_GetTime(RTC_Format_BIN, &RTC_TimeStruct);
/* Refresh : Display the curent time and the sub second on the LCD */
RTC_Time_Display(37, Black , RTC_Get_Time(SecondFraction , &RTC_TimeStruct));
}
else
{
/* Re-initialize the Display time on the LCD */
RTC_Time_InitDisplay();
}
}
}
/**
* @brief Main program.
* @param None
* @retval None
*/
void COMP_LDR_Example(void)
{
/*!< At this stage the microcontroller clock setting is already configured,
this is done through SystemInit() function which is called from startup
file (startup_stm32f30x.s) before to branch to application main.
To reconfigure the default setting of SystemInit() function, refer to
system_stm32f30x.c file
*/
uint8_t ldrlevel = 11, ldrlevelp = 0, daclevel = 0;
uint16_t tmp = 0;
/* Initialize the TFT-LCD */
STM32303C_LCD_Init();
/* Clear the LCD */
LCD_Clear(LCD_COLOR_BLACK);
/* Set the LCD Back Color */
LCD_SetBackColor(LCD_COLOR_BLACK);
/* Set the LCD Text Color */
LCD_SetTextColor(LCD_COLOR_WHITE);
/* Displays Light dependent resistor (LDR) message on line 0 */
LCD_DisplayStringLine(LINE(0), (uint8_t *)MESSAGE1);
/* COMP Configuration */
COMP_Config();
/* DAC channel 1 Configuration */
DAC_Config();
/* Infinite loop */
while (1)
{
for(daclevel = 0; daclevel < 11; daclevel++)
{
/* Set DAC Channel1 DHR register */
DAC_SetChannel1Data(DAC_Align_12b_R, (uint16_t)(daclevel * 150));
Delay((0xFFFF));
/* Check on the Comp output level*/
if (COMP_GetOutputLevel(COMP_Selection_COMP7) == COMP_OutputLevel_High)
{
ldrlevel--;
}
}
switch(ldrlevel)
{
case 1:
/* Displays MESSAGE on line 7 */
LCD_DisplayStringLine(LINE(7), (uint8_t *)" Level 0 ");
break;
case 2:
/* Displays MESSAGE on line 7 */
LCD_DisplayStringLine(LINE(7), (uint8_t *)" Level 1 ");
break;
case 3:
/* Displays MESSAGE on line 7 */
LCD_DisplayStringLine(LINE(7), (uint8_t *)" Level 2 ");
break;
case 4:
/* Displays MESSAGE on line 7 */
LCD_DisplayStringLine(LINE(7), (uint8_t *)" Level 3 ");
break;
case 5:
/* Displays MESSAGE on line 7 */
LCD_DisplayStringLine(LINE(7), (uint8_t *)" Level 4 ");
break;
case 6:
/* Displays MESSAGE on line 7 */
LCD_DisplayStringLine(LINE(7), (uint8_t *)" Level 5 ");
break;
case 7:
/* Displays MESSAGE on line 7 */
LCD_DisplayStringLine(LINE(7), (uint8_t *)" Level 6 ");
break;
case 8:
/* Displays MESSAGE on line 7 */
LCD_DisplayStringLine(LINE(7), (uint8_t *)" Level 7 ");
break;
case 9:
/* Displays MESSAGE on line 7 */
LCD_DisplayStringLine(LINE(7), (uint8_t *)" Level 8 ");
break;
case 10:
/* Displays MESSAGE on line 7 */
LCD_DisplayStringLine(LINE(7), (uint8_t *)" Level 9 ");
break;
case 11:
/* Displays MESSAGE on line 7 */
LCD_DisplayStringLine(LINE(7), (uint8_t *)" Level 10 ");
break;
default :
/* Displays MESSAGE on line 7 */
LCD_DisplayStringLine(LINE(7), (uint8_t *)" Level 0 ");
ldrlevel = 1;
break;
}
if(ldrlevelp != ldrlevel)
{
/* Set the LCD Text Color */
LCD_SetTextColor(LCD_COLOR_WHITE);
/* Displays a rectangle on the LCD */
LCD_DrawRect(199, 311, 22, 302 );
/* Set the LCD Back Color */
LCD_SetBackColor(LCD_COLOR_BLACK);
LCD_SetTextColor(LCD_COLOR_BLACK);
LCD_DrawFullRect(200, 310, 300, 20);
/* Set the LCD Text Color */
LCD_SetTextColor(LCD_COLOR_YELLOW);
/* Set the LCD Back Color */
LCD_SetBackColor(LCD_COLOR_YELLOW);
/* Displays a full rectangle */
tmp = 30 * (ldrlevel-1);
if (tmp ==0) tmp = 5;
LCD_DrawFullRect(200, 310, tmp , 20);
}
ldrlevelp = ldrlevel;
ldrlevel = 11;
/* Set the LCD Back Color */
LCD_SetBackColor(LCD_COLOR_BLACK);
}
}
/**
* @brief Main program.
* @param None
* @retval None
*/
int main(void)
{
/*!< At this stage the microcontroller clock setting is already configured,
this is done through SystemInit() function which is called from startup
file (startup_stm32f30x.s) before to branch to application main.
To reconfigure the default setting of SystemInit() function, refer to
system_stm32f30x.c file
*/
/* Initialize the LCD */
STM32303C_LCD_Init();
/* Clear the LCD */
LCD_Clear(LCD_COLOR_WHITE);
/* Set the LCD Back Color */
LCD_SetBackColor(Blue);
/* Set the LCD Text Color */
LCD_SetTextColor(White);
/* Displays MESSAGE1 on line 0 */
LCD_DisplayStringLine(LINE(0), (uint8_t *)MESSAGE1);
/* Set the LCD Text size */
LCD_SetFont(&Font8x12);
/* Display */
LCD_DisplayStringLine(LINE(0x13), (uint8_t*)" CAN CAN_DualFIFO using FIFO 0 and FIFO 1 ");
/* Set the LCD Back Color */
LCD_SetBackColor(White);
/* Set the LCD Text Color */
LCD_SetTextColor(Blue);
/* Set the LCD Text size */
LCD_SetFont(&Font12x12);
/* Display Messages on the LCD */
LCD_DisplayStringLine(LINE(0x7), (uint8_t *)MESSAGE2);
LCD_DisplayStringLine(LINE(0x8), (uint8_t *)MESSAGE3);
/* Set the LCD Text size */
LCD_SetFont(&Font16x24);
/* Configures LED 1..4 */
STM_EVAL_LEDInit(LED1);
STM_EVAL_LEDInit(LED2);
STM_EVAL_LEDInit(LED3);
STM_EVAL_LEDInit(LED4);
/* Configure Push button key */
STM_EVAL_PBInit(BUTTON_KEY, BUTTON_MODE_EXTI);
/* Configure Push button sel */
STM_EVAL_PBInit(BUTTON_SEL, BUTTON_MODE_EXTI);
/* CAN configuration */
CAN_Config();
/* Infinite loop */
while(1)
{
}
}
/**
* @brief Main program.
* @param None
* @retval None
*/
void I2C_TSENSOR_Example(void)
{
/*!< At this stage the microcontroller clock setting is already configured,
this is done through SystemInit() function which is called from startup
file (startup_stm32f30x.s) before to branch to application main.
To reconfigure the default setting of SystemInit() function, refer to
system_stm32f30x.c file
*/
uint32_t i = 0;
/* Initialize the LCD */
STM32303C_LCD_Init();
/* Initialize the Temperature Sensor */
TS751_Init();
if (TS751_GetStatus() == SUCCESS)
{
/* Clear the LCD */
LCD_Clear(LCD_COLOR_WHITE);
/* Set the Back Color */
LCD_SetBackColor(LCD_COLOR_BLUE);
/* Set the Text Color */
LCD_SetTextColor(LCD_COLOR_GREEN);
LCD_DisplayStringLine(LCD_LINE_0, " Temperature ");
LCD_DisplayStringLine(LCD_LINE_8, " Check JP1 closed ");
/* Set the Back Color */
LCD_SetBackColor(LCD_COLOR_WHITE);
/* Set the Text Color */
LCD_SetTextColor(LCD_COLOR_BLACK);
/* NVIC Configuration */
NVIC_Config();
/* Enables the I2C SMBus Alert feature */
I2C_SMBusAlertCmd(I2C2, ENABLE);
I2C_ClearFlag(I2C2, I2C_FLAG_ALERT);
SMbusAlertOccurred = 0;
/* Enable SMBus Alert interrupt */
I2C_ITConfig(I2C2, I2C_IT_ERRI, ENABLE);
/* Configure the Temperature sensor device STTS751 */
TS751_WriteConfReg(0x0C);
/* Configure the Temperature Therm limit as 40°C */
TS751_WriteReg(0x05, TEMPERATURE_TOS);
TS751_WriteReg(0x20, TEMPERATURE_TOS);
/* Configure the Temperature Thys limit as 20°C */
TS751_WriteReg(0x07, TEMPERATURE_THYS);
TS751_WriteReg(0x21, TEMPERATURE_THYS);
/* Infinite Loop */
while (1)
{
/* Get double of Temperature value */
TempValue = TS751_ReadTemp();
if (TempValue <= 2048)
{
/* Positive temperature measured */
TempCelsiusDisplay[4] = '+';
/* Initialize the temperature sensor value */
TempValueCelsius = TempValue;
}
else
{
/* Negative temperature measured */
TempCelsiusDisplay[4] = '-';
/* Remove temperature value sign */
TempValueCelsius = 0x1000 - TempValue;
}
TempCelsius = 0;
/* Calculate temperature digits in ÝC */
if (TempValueCelsius & 0x01)
{
TempCelsius += 625;
}
if (TempValueCelsius & 0x02)
{
TempCelsius += 1250;
}
if (TempValueCelsius & 0x04)
{
TempCelsius += 2500;
}
if (TempValueCelsius & 0x08)
{
TempCelsius += 5000;
}
TempCelsiusDisplay[9] = (TempCelsius / 1000) + 0x30;
TempCelsiusDisplay[10] = ((TempCelsius % 1000) / 100) + 0x30;
TempCelsiusDisplay[11] = (((TempCelsius % 1000) % 100) / 10)+ 0x30;
TempCelsiusDisplay[12] = (((TempCelsius % 1000) % 100) % 10) + 0x30;
TempValueCelsius >>= 4;
TempCelsiusDisplay[5] = (TempValueCelsius / 100) + 0x30;
TempCelsiusDisplay[6] = ((TempValueCelsius % 100) / 10) + 0x30;
TempCelsiusDisplay[7] = ((TempValueCelsius % 100) % 10) + 0x30;
TempValueCelsiusFloat = TempValueCelsius + (float) (TempCelsius/10000.0);
if (TempValue > 2048)
{
if (((9 * TempValueCelsiusFloat) / 5) <= 32)
{
/* Convert temperature °C to Fahrenheit */
TempValueFahrenheitFloat = abs ((int)(32 - ((9 * TempValueCelsiusFloat) / 5)));
TempValueFahrenheit = (int) (TempValueFahrenheitFloat);
/* Calculate temperature digits in °F */
TempFahrenheitDisplay[5] = (TempValueFahrenheit / 100) + 0x30;
TempFahrenheitDisplay[6] = ((TempValueFahrenheit % 100) / 10) + 0x30;
TempFahrenheitDisplay[7] = ((TempValueFahrenheit % 100) % 10) + 0x30;
/* Positive temperature measured */
TempFahrenheitDisplay[4] = '+';
TempFahrenheit = TempValueFahrenheitFloat - TempValueFahrenheit;
TempFahrenheitDisplay[9] = (int)(TempFahrenheit * 10) + 0x30;
TempFahrenheitDisplay[10] = ((int)(TempFahrenheit * 100) % 10) + 0x30;
TempFahrenheitDisplay[11] = ((int)(TempFahrenheit * 1000) % 10) + 0x30;
TempFahrenheitDisplay[12] = ((int)(TempFahrenheit * 10000) % 10) + 0x30;
}
else
{
/* Convert temperature °C to Fahrenheit */
TempValueFahrenheitFloat = abs((int)(((9 * TempValueCelsiusFloat) / 5) - 32));
TempValueFahrenheit = (int) (TempValueFahrenheitFloat);
/* Calculate temperature digits in °F */
TempFahrenheitDisplay[5] = (TempValueFahrenheit / 100) + 0x30;
TempFahrenheitDisplay[6] = ((TempValueFahrenheit % 100) / 10) + 0x30;
TempFahrenheitDisplay[7] = ((TempValueFahrenheit % 100) % 10) + 0x30;
/* Negative temperature measured */
TempFahrenheitDisplay[4] = '-';
TempFahrenheit = TempValueFahrenheitFloat - TempValueFahrenheit;
TempFahrenheitDisplay[9] = (int)(TempFahrenheit * 10) + 0x30;
TempFahrenheitDisplay[10] = ((int)(TempFahrenheit * 100) % 10) + 0x30;
TempFahrenheitDisplay[11] = ((int)(TempFahrenheit * 1000) % 10) + 0x30;
TempFahrenheitDisplay[12] = ((int)(TempFahrenheit * 10000) % 10) + 0x30;
}
}
else
{
/* Convert temperature °C to Fahrenheit */
TempValueFahrenheitFloat = ((9 * TempValueCelsiusFloat) / 5) + 32;
TempValueFahrenheit = (int) (TempValueFahrenheitFloat);
/* Calculate temperature digits in °F */
TempFahrenheitDisplay[5] = (TempValueFahrenheit / 100) + 0x30;
TempFahrenheitDisplay[6] = ((TempValueFahrenheit % 100) / 10) + 0x30;
TempFahrenheitDisplay[7] = ((TempValueFahrenheit % 100) % 10) + 0x30;
/* Positive temperature measured */
TempFahrenheitDisplay[4] = '+';
TempFahrenheit = TempValueFahrenheitFloat - TempValueFahrenheit;
TempFahrenheitDisplay[9] = (int)(TempFahrenheit * 10) + 0x30;
TempFahrenheitDisplay[10] = ((int)(TempFahrenheit * 100) % 10) + 0x30;
TempFahrenheitDisplay[11] = ((int)(TempFahrenheit * 1000) % 10) + 0x30;
TempFahrenheitDisplay[12] = ((int)(TempFahrenheit * 10000) % 10) + 0x30;
}
/* Display Fahrenheit value on LCD */
for (i = 0; i < 20; i++)
{
LCD_DisplayChar(LCD_LINE_6, (319 - (16 * i)), TempCelsiusDisplay[i]);
LCD_DisplayChar(LCD_LINE_7, (319 - (16 * i)), TempFahrenheitDisplay[i]);
}
if ((SMbusAlertOccurred == 1) && ((TempValueCelsius > (TEMPERATURE_TOS-1)) && (TempValue < 2048)))
{
Var = 1;
/* Set the Back Color */
LCD_SetBackColor(LCD_COLOR_BLUE);
/* Set the Text Color */
LCD_SetTextColor(LCD_COLOR_RED);
LCD_DisplayStringLine(LCD_LINE_1, "Temp higher than 40C");
}
if ((SMbusAlertOccurred == 1) && ((TempValueCelsius < TEMPERATURE_THYS) || (TempValue > 2048)))
{
Var = 2;
/* Set the Back Color */
LCD_SetBackColor(LCD_COLOR_BLUE);
/* Set the Text Color */
LCD_SetTextColor(LCD_COLOR_RED);
LCD_DisplayStringLine(LCD_LINE_1, "Temp lower than 20C ");
}
if ((SMbusAlertOccurred == 1) && (TempValueCelsius < TEMPERATURE_TOS) && (Var == 1))
{
Var = 0;
SMbusAlertOccurred = 0;
Tmp = TS751_AlerteResponseAddressRead();
/* Set the Back Color */
LCD_SetBackColor(LCD_COLOR_WHITE);
/* Set the Text Color */
LCD_SetTextColor(LCD_COLOR_WHITE);
LCD_ClearLine(LCD_LINE_1);
/* Set the Text Color */
LCD_SetTextColor(LCD_COLOR_BLACK);
}
if (((SMbusAlertOccurred == 1) && (TempValueCelsius > (TEMPERATURE_THYS-1)) && (Var == 2)) && (TempValue < 2048))
{
Var = 0;
SMbusAlertOccurred = 0;
Tmp = TS751_AlerteResponseAddressRead();
/* Set the Back Color */
LCD_SetBackColor(LCD_COLOR_WHITE);
/* Set the Text Color */
LCD_SetTextColor(LCD_COLOR_WHITE);
LCD_ClearLine(LCD_LINE_1);
/* Set the Text Color */
LCD_SetTextColor(LCD_COLOR_BLACK);
}
}
}
/**
* @brief Main program.
* @param None
* @retval None
*/
int main(void)
{
/*!< At this stage the microcontroller clock setting is already configured,
this is done through SystemInit() function which is called from startup
file (startup_stm32f30x.s) before to branch to application main.
To reconfigure the default setting of SystemInit() function, refer to
system_stm32f30x.c file
*/
/* Configure Clocks */
RCC_Config();
/* Initialize LEDs, Key Button and LCD available on
STM32303C-EVAL board *****************************************************/
STM_EVAL_LEDInit(LED1);
STM_EVAL_LEDInit(LED2);
STM_EVAL_LEDInit(LED3);
STM_EVAL_LEDInit(LED4);
/* Initialize the LCD */
STM32303C_LCD_Init();
/* Display message on LCD ***********************************************/
/* Clear the LCD */
LCD_Clear(White);
/* Set the LCD Back Color */
LCD_SetBackColor(Blue);
/* Set the LCD Text Color */
LCD_SetTextColor(Yellow);
LCD_DisplayStringLine(Line0, (uint8_t*)MESSAGE1);
LCD_DisplayStringLine(Line1, (uint8_t*)MESSAGE2);
/* Set the LCD Back Color */
LCD_SetBackColor(White);
/* Set the LCD Text Color */
LCD_SetTextColor(Blue);
/* Configure the Push buttons in Polling mode */
STM_EVAL_PBInit(BUTTON_KEY, Mode_GPIO);
/* if STM32 device is set as Master */
#ifdef I2C_MASTER
/* Configure and enable the systick timer to generate an interrupt each 1 ms */
SysTick_Config((SystemCoreClock / 1000));
/* Deinitialize I2Cx Device */
CPAL_I2C_DeInit(&MASTERSTRUCTURE);
/* Initialize CPAL I2C structure parameters values */
CPAL_I2C_StructInit(&MASTERSTRUCTURE);
MASTERSTRUCTURE.wCPAL_Options = CPAL_OPT_NO_MEM_ADDR;
#ifdef CPAL_I2C_DMA_PROGMODEL
MASTERSTRUCTURE.CPAL_ProgModel = CPAL_PROGMODEL_DMA;
#elif defined (CPAL_I2C_IT_PROGMODEL)
MASTERSTRUCTURE.CPAL_ProgModel = CPAL_PROGMODEL_INTERRUPT;
#else
#error "Please select one of the programming model (in main.h)"
#endif
/* Set I2C Speed */
MASTERSTRUCTURE.pCPAL_I2C_Struct->I2C_Timing = MASTER_I2C_TIMING;
/* Select Master Mode */
MASTERSTRUCTURE.CPAL_Mode = CPAL_MODE_MASTER;
/* Initialize I2Cx Device*/
CPAL_I2C_Init(&MASTERSTRUCTURE);
/* Infinite loop */
while(1)
{
/* Initialize Transfer parameters */
MASTERSTRUCTURE.pCPAL_TransferTx = &sTxStructure;
sTxStructure.wNumData = BufferSize;
sTxStructure.pbBuffer = (uint8_t*)BufferTX;
sTxStructure.wAddr1 = OWNADDRESS;
/* Update LCD Display */
LCD_SetBackColor(White);
LCD_SetTextColor(Blue);
LCD_DisplayStringLine(Line8, (uint8_t*)MEASSAGE_EMPTY);
LCD_DisplayStringLine(Line5, (uint8_t*)MESSAGE4);
LCD_DisplayStringLine(Line6, (uint8_t*)MESSAGE5);
/* wait until Key button is pushed */
while(STM_EVAL_PBGetState(BUTTON_KEY));
/* Update LCD Display */
LCD_DisplayStringLine(Line5, (uint8_t*)MEASSAGE_EMPTY);
LCD_DisplayStringLine(Line6, (uint8_t*)MEASSAGE_EMPTY);
/* Write operation */
CPAL_I2C_Write(&MASTERSTRUCTURE);
/* Wait until communication finishes */
while ((MASTERSTRUCTURE.CPAL_State != CPAL_STATE_READY) && (MASTERSTRUCTURE.CPAL_State != CPAL_STATE_ERROR));
if (TransferStatus == PASSED)
{
/* Update LCD Display */
LCD_SetBackColor(Red);
LCD_SetTextColor(White);
LCD_DisplayStringLine(Line8, (uint8_t*)MESSAGE6);
}
else
{
TransferStatus = PASSED;
}
Delay(1000);
}
#endif /* I2C_MASTER */
/* if STM32 device is set as Slave */
#ifdef I2C_SLAVE
/* GPIOA Periph clock enable */
RCC_AHBPeriphClockCmd(RCC_AHBPeriph_GPIOA, ENABLE);
/* Output System Clock on MCO pin (PA.08) */
GPIO_InitStructure.GPIO_Pin = GPIO_Pin_8;
GPIO_InitStructure.GPIO_Speed = GPIO_Speed_50MHz;
GPIO_InitStructure.GPIO_Mode = GPIO_Mode_AF;
GPIO_InitStructure.GPIO_OType = GPIO_OType_PP;
GPIO_InitStructure.GPIO_PuPd = GPIO_PuPd_NOPULL;
GPIO_Init(GPIOA, &GPIO_InitStructure);
#if defined(STM32F303xC)
RCC_MCOConfig(RCC_MCOSource_SYSCLK);
#else /* STM32F334x8 || STM32F302x8 || STM32F303xE */
RCC_MCOConfig(RCC_MCOSource_SYSCLK, RCC_MCOPrescaler_1);
#endif /* STM32F303xC */
/* Deinitialize I2Cx Device */
CPAL_I2C_DeInit(&SLAVESTRUCTURE);
/* Initialize CPAL I2C structure parameters values */
CPAL_I2C_StructInit(&SLAVESTRUCTURE);
SLAVESTRUCTURE.wCPAL_Options = CPAL_OPT_I2C_NACK_ADD | CPAL_OPT_I2C_WAKEUP_STOP;
#ifdef CPAL_I2C_DMA_PROGMODEL
SLAVESTRUCTURE.CPAL_ProgModel = CPAL_PROGMODEL_DMA;
#elif defined (CPAL_I2C_IT_PROGMODEL)
SLAVESTRUCTURE.CPAL_ProgModel = CPAL_PROGMODEL_INTERRUPT;
#else
#error "Please select one of the programming model (in main.h)"
#endif
/* Configure Own address 1 */
SLAVESTRUCTURE.pCPAL_I2C_Struct->I2C_OwnAddress1 = OWNADDRESS;
/* Set I2C Speed */
SLAVESTRUCTURE.pCPAL_I2C_Struct->I2C_Timing = SLAVE_I2C_TIMING;
/* Select Slave Mode */
SLAVESTRUCTURE.CPAL_Mode = CPAL_MODE_SLAVE;
/* Initialize I2Cx Device*/
CPAL_I2C_Init(&SLAVESTRUCTURE);
/* Infinite loop */
while(1)
{
/* Reset BufferRX value */
Reset_bBuffer(BufferRX, BufferSize);
/* Initialize Transfer parameters */
SLAVESTRUCTURE.pCPAL_TransferRx = &sRxStructure;
sRxStructure.wNumData = BufferSize;
sRxStructure.pbBuffer = (uint8_t*)BufferRX;
/* Update LCD Display */
LCD_SetBackColor(White);
LCD_SetTextColor(Blue);
LCD_DisplayStringLine(Line8, (uint8_t*)MEASSAGE_EMPTY);
LCD_DisplayStringLine(Line9, (uint8_t*)MEASSAGE_EMPTY);
LCD_DisplayStringLine(Line5, (uint8_t*)MESSAGE7);
Delay(1000);
/* Update LCD Display */
LCD_DisplayStringLine(Line5, (uint8_t*)MEASSAGE_EMPTY);
LCD_DisplayStringLine(Line6, (uint8_t*)MESSAGE8);
/* Read operation */
CPAL_I2C_Read(&SLAVESTRUCTURE);
/* Enter Stop Mode and wait for interrupt to wake up */
PWR_EnterSTOPMode(PWR_Regulator_LowPower, PWR_STOPEntry_WFI);
/* Wait until communication finishes */
while ((SLAVESTRUCTURE.CPAL_State != CPAL_STATE_READY) && (SLAVESTRUCTURE.CPAL_State != CPAL_STATE_ERROR));
/* Configure SystemClock*/
RestoreConfiguration();
/* Configure and enable the systick timer to generate an interrupt each 1 ms */
SysTick_Config((SystemCoreClock / 1000));
/* Update LCD Display */
LCD_DisplayStringLine(Line6, (uint8_t*)MEASSAGE_EMPTY);
LCD_SetBackColor(Red);
LCD_SetTextColor(White);
LCD_DisplayStringLine(Line8, (uint8_t*)MESSAGE9);
/* If are received correctly */
if (Compare_bBuffer((uint8_t*)BufferTX, BufferRX, BufferSize) == PASSED )
{
/* Update LCD Display */
LCD_DisplayStringLine(Line9, (uint8_t*)MESSAGE6);
}
else
{
/* Update LCD Display */
LCD_DisplayStringLine(Line9, (uint8_t*)MESSAGE10);
}
Delay(1500);
}
#endif /* I2C_SLAVE */
}
