bool PCB_EDIT_FRAME::doAutoSave()
{
wxFileName tmpFileName = Prj().AbsolutePath( GetBoard()->GetFileName() );
wxFileName fn = tmpFileName;
// Auto save file name is the normal file name prepended with
// autosaveFilePrefix string.
fn.SetName( wxString( autosavePrefix ) + fn.GetName() );
wxLogTrace( traceAutoSave,
wxT( "Creating auto save file <" + fn.GetFullPath() ) + wxT( ">" ) );
if( !fn.IsOk() )
return false;
else if( SavePcbFile( fn.GetFullPath(), NO_BACKUP_FILE ) )
{
GetScreen()->SetModify();
GetBoard()->SetFileName( tmpFileName.GetFullPath() );
UpdateTitle();
m_autoSaveState = false;
return true;
}
GetBoard()->SetFileName( tmpFileName.GetFullPath() );
return false;
}
void PCB_EDIT_FRAME::OnCloseWindow( wxCloseEvent& Event )
{
m_canvas->SetAbortRequest( true );
if( GetScreen()->IsModify() )
{
wxString msg = wxString::Format( _(
"Save the changes in\n"
"'%s'\n"
"before closing?" ),
GetChars( GetBoard()->GetFileName() )
);
int ii = DisplayExitDialog( this, msg );
switch( ii )
{
case wxID_CANCEL:
Event.Veto();
return;
case wxID_NO:
break;
case wxID_YES:
SavePcbFile( GetBoard()->GetFileName() );
break;
}
}
GetGalCanvas()->StopDrawing();
// Delete the auto save file if it exists.
wxFileName fn = GetBoard()->GetFileName();
// Auto save file name is the normal file name prefixed with a '$'.
fn.SetName( wxT( "$" ) + fn.GetName() );
// Remove the auto save file on a normal close of Pcbnew.
if( fn.FileExists() && !wxRemoveFile( fn.GetFullPath() ) )
{
wxString msg = wxString::Format( _(
"The auto save file '%s' could not be removed!" ),
GetChars( fn.GetFullPath() )
);
wxMessageBox( msg, Pgm().App().GetAppName(), wxOK | wxICON_ERROR, this );
}
// Delete board structs and undo/redo lists, to avoid crash on exit
// when deleting some structs (mainly in undo/redo lists) too late
Clear_Pcb( false );
// do not show the window because ScreenPcb will be deleted and we do not
// want any paint event
Show( false );
Destroy();
}
void WinEDA_PcbFrame::OnCloseWindow(wxCloseEvent & Event)
/********************************************************/
{
PCB_SCREEN * screen;
DrawPanel->m_AbortRequest = TRUE;
screen = ScreenPcb ;
while( screen )
{
if(screen->IsModify()) break;
screen = screen->Next();
}
if ( screen )
{
unsigned ii;
wxMessageDialog dialog(this, _("Board modified, Save before exit ?"),
_("Confirmation"), wxYES_NO | wxCANCEL | wxICON_EXCLAMATION | wxYES_DEFAULT);
ii = dialog.ShowModal();
switch ( ii )
{
case wxID_CANCEL:
Event.Veto();
return;
case wxID_NO:
break;
case wxID_OK:
case wxID_YES:
SavePcbFile(GetScreen()->m_FileName);
break;
}
}
while( screen ) // suppression flag modify pour eviter d'autres message
{
screen->ClrModify();
screen = screen->Next();
}
/* Reselection de l'ecran de base,
pour les evenements de refresh générés par wxWindows */
m_CurrentScreen = ActiveScreen = ScreenPcb;
SaveSettings();
Destroy();
}
bool PCB_EDIT_FRAME::doAutoSave()
{
wxFileName tmpFileName;
if( GetBoard()->GetFileName().IsEmpty() )
{
tmpFileName = wxFileName( wxStandardPaths::Get().GetDocumentsDir(), wxT( "noname" ),
KiCadPcbFileExtension );
GetBoard()->SetFileName( tmpFileName.GetFullPath() );
}
else
{
tmpFileName = Prj().AbsolutePath( GetBoard()->GetFileName() );
}
wxFileName autoSaveFileName = tmpFileName;
// Auto save file name is the board file name prepended with autosaveFilePrefix string.
autoSaveFileName.SetName( GetAutoSaveFilePrefix() + autoSaveFileName.GetName() );
if( !autoSaveFileName.IsOk() )
return false;
// If the board file path is not writable, try writing to a platform specific temp file
// path. If that path isn't writabe, give up.
if( !autoSaveFileName.IsDirWritable() )
{
autoSaveFileName.SetPath( wxFileName::GetTempDir() );
if( !autoSaveFileName.IsOk() || !autoSaveFileName.IsDirWritable() )
return false;
}
wxLogTrace( traceAutoSave, "Creating auto save file <" + autoSaveFileName.GetFullPath() + ">" );
if( SavePcbFile( autoSaveFileName.GetFullPath(), NO_BACKUP_FILE ) )
{
GetScreen()->SetModify();
GetBoard()->SetFileName( tmpFileName.GetFullPath() );
UpdateTitle();
m_autoSaveState = false;
return true;
}
GetBoard()->SetFileName( tmpFileName.GetFullPath() );
return false;
}
bool PCB_EDIT_FRAME::OpenProjectFiles( const std::vector<wxString>& aFileSet, int aCtl )
{
// This is for python:
if( aFileSet.size() != 1 )
{
UTF8 msg = StrPrintf( "Pcbnew:%s() takes only a single filename", __func__ );
DisplayError( this, msg );
return false;
}
wxString fullFileName( aFileSet[0] );
// We insist on caller sending us an absolute path, if it does not, we say it's a bug.
wxASSERT_MSG( wxFileName( fullFileName ).IsAbsolute(), wxT( "Path is not absolute!" ) );
std::unique_ptr<wxSingleInstanceChecker> lockFile = ::LockFile( fullFileName );
if( !lockFile )
{
wxString msg = wxString::Format( _( "PCB file \"%s\" is already open." ), fullFileName );
DisplayError( this, msg );
return false;
}
if( GetScreen()->IsModify() && !GetBoard()->IsEmpty() )
{
if( !HandleUnsavedChanges( this, _( "The current PCB has been modified. Save changes?" ),
[&]()->bool { return SavePcbFile( GetBoard()->GetFileName(), CREATE_BACKUP_FILE ); } ) )
{
return false;
}
}
// Release the lock file, until the new file is actually loaded
ReleaseFile();
wxFileName pro = fullFileName;
pro.SetExt( ProjectFileExtension );
bool is_new = !wxFileName::IsFileReadable( fullFileName );
// If its a non-existent schematic and caller thinks it exists
if( is_new && !( aCtl & KICTL_CREATE ) )
{
// notify user that fullFileName does not exist, ask if user wants to create it.
wxString ask = wxString::Format( _( "PCB \"%s\" does not exist. Do you wish to create it?" ),
fullFileName );
if( !IsOK( this, ask ) )
return false;
}
Clear_Pcb( false ); // pass false since we prompted above for a modified board
IO_MGR::PCB_FILE_T pluginType = plugin_type( fullFileName, aCtl );
bool converted = pluginType != IO_MGR::LEGACY && pluginType != IO_MGR::KICAD_SEXP;
if( !converted )
{
// PROJECT::SetProjectFullName() is an impactful function. It should only be
// called under carefully considered circumstances.
// The calling code should know not to ask me here to change projects unless
// it knows what consequences that will have on other KIFACEs running and using
// this same PROJECT. It can be very harmful if that calling code is stupid.
Prj().SetProjectFullName( pro.GetFullPath() );
// load project settings before BOARD
LoadProjectSettings();
}
if( is_new )
{
OnModify();
}
else
{
BOARD* loadedBoard = 0; // it will be set to non-NULL if loaded OK
PLUGIN::RELEASER pi( IO_MGR::PluginFind( pluginType ) );
// This will rename the file if there is an autosave and the user want to recover
CheckForAutoSaveFile( fullFileName );
try
{
PROPERTIES props;
char xbuf[30];
char ybuf[30];
// EAGLE_PLUGIN can use this info to center the BOARD, but it does not yet.
sprintf( xbuf, "%d", GetPageSizeIU().x );
sprintf( ybuf, "%d", GetPageSizeIU().y );
props["page_width"] = xbuf;
props["page_height"] = ybuf;
#if USE_INSTRUMENTATION
// measure the time to load a BOARD.
unsigned startTime = GetRunningMicroSecs();
#endif
loadedBoard = pi->Load( fullFileName, NULL, &props );
#if USE_INSTRUMENTATION
unsigned stopTime = GetRunningMicroSecs();
printf( "PLUGIN::Load(): %u usecs\n", stopTime - startTime );
#endif
}
catch( const IO_ERROR& ioe )
{
if( ioe.Problem() != wxT( "CANCEL" ) )
{
wxString msg = wxString::Format( _( "Error loading board file:\n%s" ), fullFileName );
DisplayErrorMessage( this, msg, ioe.What() );
}
return false;
}
// 6.0 TODO: some settings didn't make it into the board file in 5.1 so as not to
// change the file format. For 5.1 we must copy them across from the config-initialized
// board.
BOARD_DESIGN_SETTINGS& bds = loadedBoard->m_designSettings;
BOARD_DESIGN_SETTINGS& configBds = GetBoard()->GetDesignSettings();
bds.m_RequireCourtyards = configBds.m_RequireCourtyards;
bds.m_ProhibitOverlappingCourtyards = configBds.m_ProhibitOverlappingCourtyards;
bds.m_HoleToHoleMin = configBds.m_HoleToHoleMin;
bds.m_LineThickness[LAYER_CLASS_OTHERS] = configBds.m_LineThickness[LAYER_CLASS_OTHERS];
bds.m_TextSize[LAYER_CLASS_OTHERS] = configBds.m_TextSize[LAYER_CLASS_OTHERS];
bds.m_TextThickness[LAYER_CLASS_OTHERS] = configBds.m_TextThickness[LAYER_CLASS_OTHERS];
std::copy( configBds.m_TextItalic, configBds.m_TextItalic + 4, bds.m_TextItalic );
std::copy( configBds.m_TextUpright, configBds.m_TextUpright + 4, bds.m_TextUpright );
bds.m_DiffPairDimensionsList = configBds.m_DiffPairDimensionsList;
bds.m_CopperEdgeClearance = configBds.m_CopperEdgeClearance;
SetBoard( loadedBoard );
// we should not ask PLUGINs to do these items:
loadedBoard->BuildListOfNets();
loadedBoard->SynchronizeNetsAndNetClasses();
// If this is a legacy board then we set the copper edge clearance to 1/2 the edge-cut
// line width (which was a legacy kludge for implementing edge clearances).
if( bds.m_CopperEdgeClearance == Millimeter2iu( LEGACY_COPPEREDGECLEARANCE ) )
bds.SetCopperEdgeClearance( inferLegacyEdgeClearance( loadedBoard ) );
if( loadedBoard->IsModified() )
OnModify();
else
GetScreen()->ClrModify();
if( pluginType == IO_MGR::LEGACY &&
loadedBoard->GetFileFormatVersionAtLoad() < LEGACY_BOARD_FILE_VERSION )
{
DisplayInfoMessage( this,
_( "This file was created by an older version of Pcbnew.\n"
"It will be stored in the new file format when you save this file again." ) );
}
}
{
wxFileName fn = fullFileName;
if( converted )
fn.SetExt( PcbFileExtension );
wxString fname = fn.GetFullPath();
fname.Replace( WIN_STRING_DIR_SEP, UNIX_STRING_DIR_SEP );
GetBoard()->SetFileName( fname );
}
// Lock the file newly opened:
m_file_checker.reset( lockFile.release() );
if( !converted )
UpdateFileHistory( GetBoard()->GetFileName() );
// Rebuild the new pad list (for drc and ratsnet control ...)
GetBoard()->m_Status_Pcb = 0;
// Select netclass Default as current netclass (it always exists)
SetCurrentNetClass( NETCLASS::Default );
// Rebuild list of nets (full ratsnest rebuild)
Compile_Ratsnest( NULL, true );
GetBoard()->BuildConnectivity();
onBoardLoaded();
// Refresh the 3D view, if any
EDA_3D_VIEWER* draw3DFrame = Get3DViewerFrame();
if( draw3DFrame )
draw3DFrame->NewDisplay();
#if 0 && defined(DEBUG)
// Output the board object tree to stdout, but please run from command prompt:
GetBoard()->Show( 0, std::cout );
#endif
// from EDA_APPL which was first loaded BOARD only:
{
/* For an obscure reason the focus is lost after loading a board file
* when starting up the process.
* (seems due to the recreation of the layer manager after loading the file)
* Give focus to main window and Drawpanel
* must be done for these 2 windows (for an obscure reason ...)
* Linux specific
* This is more a workaround than a fix.
*/
SetFocus();
GetCanvas()->SetFocus();
}
return true;
}
bool PCB_EDIT_FRAME::Files_io_from_id( int id )
{
wxString msg;
// If an edit is in progress, stop it.
// For something else than save, get rid of current tool.
if( id == ID_SAVE_BOARD )
m_canvas->EndMouseCapture( -1, m_canvas->GetDefaultCursor() );
else
m_canvas->EndMouseCapture( ID_NO_TOOL_SELECTED, m_canvas->GetDefaultCursor() );
switch( id )
{
case ID_LOAD_FILE:
{
int open_ctl = 0;
wxString fileName = Prj().AbsolutePath( GetBoard()->GetFileName() );
return AskLoadBoardFileName( this, &open_ctl, &fileName, true )
&& OpenProjectFiles( std::vector<wxString>( 1, fileName ), open_ctl );
}
case ID_IMPORT_NON_KICAD_BOARD:
{
int open_ctl = 1;
wxString fileName; // = Prj().AbsolutePath( GetBoard()->GetFileName() );
return AskLoadBoardFileName( this, &open_ctl, &fileName, false )
&& OpenProjectFiles( std::vector<wxString>( 1, fileName ), open_ctl );
}
case ID_MENU_READ_BOARD_BACKUP_FILE:
case ID_MENU_RECOVER_BOARD_AUTOSAVE:
{
wxFileName currfn = Prj().AbsolutePath( GetBoard()->GetFileName() );
wxFileName fn = currfn;
if( id == ID_MENU_RECOVER_BOARD_AUTOSAVE )
{
wxString rec_name = GetAutoSaveFilePrefix() + fn.GetName();
fn.SetName( rec_name );
}
else
{
wxString backup_ext = fn.GetExt() + GetBackupSuffix();
fn.SetExt( backup_ext );
}
if( !fn.FileExists() )
{
msg.Printf( _( "Recovery file \"%s\" not found." ), fn.GetFullPath() );
DisplayInfoMessage( this, msg );
return false;
}
msg.Printf( _( "OK to load recovery or backup file \"%s\"" ), fn.GetFullPath() );
if( !IsOK( this, msg ) )
return false;
GetScreen()->ClrModify(); // do not prompt the user for changes
if( OpenProjectFiles( std::vector<wxString>( 1, fn.GetFullPath() ) ) )
{
// Re-set the name since name or extension was changed
GetBoard()->SetFileName( currfn.GetFullPath() );
UpdateTitle();
return true;
}
return false;
}
case ID_APPEND_FILE:
wxFAIL_MSG( "OBSOLETE! Should have gone though modern toolset." );
case ID_NEW_BOARD:
{
if( !Clear_Pcb( true ) )
return false;
wxFileName fn( wxStandardPaths::Get().GetDocumentsDir(), wxT( "noname" ),
ProjectFileExtension );
Prj().SetProjectFullName( fn.GetFullPath() );
fn.SetExt( PcbFileExtension );
GetBoard()->SetFileName( fn.GetFullPath() );
onBoardLoaded();
OnModify();
return true;
}
case ID_SAVE_BOARD:
if( !GetBoard()->GetFileName().IsEmpty() )
return SavePcbFile( Prj().AbsolutePath( GetBoard()->GetFileName() ) );
// Fall through
case ID_COPY_BOARD_AS:
case ID_SAVE_BOARD_AS:
{
wxString pro_dir = wxPathOnly( Prj().GetProjectFullName() );
wxFileName fn( pro_dir, _( "noname" ), KiCadPcbFileExtension );
wxString filename = fn.GetFullPath();
if( AskSaveBoardFileName( this, &filename ) )
{
if( id == ID_COPY_BOARD_AS )
return SavePcbCopy( filename );
else
return SavePcbFile( filename, NO_BACKUP_FILE );
}
return false;
}
default:
wxLogDebug( wxT( "File_io Internal Error" ) );
return false;
}
}
bool PCB_EDIT_FRAME::OpenProjectFiles( const std::vector<wxString>& aFileSet, int aCtl )
{
// This is for python:
if( aFileSet.size() != 1 )
{
UTF8 msg = StrPrintf( "Pcbnew:%s() takes only a single filename", __func__ );
DisplayError( this, msg );
return false;
}
wxString fullFileName( aFileSet[0] );
// We insist on caller sending us an absolute path, if it does not, we say it's a bug.
wxASSERT_MSG( wxFileName( fullFileName ).IsAbsolute(),
wxT( "bug in single_top.cpp or project manager." ) );
if( !LockFile( fullFileName ) )
{
wxString msg = wxString::Format( _(
"PCB file '%s' is already open." ),
GetChars( fullFileName )
);
DisplayError( this, msg );
return false;
}
if( GetScreen()->IsModify() )
{
int response = YesNoCancelDialog( this, _(
"The current board has been modified. Do you wish to save the changes?" ),
wxEmptyString,
_( "Save and Load" ),
_( "Load Without Saving" )
);
if( response == wxID_CANCEL )
return false;
else if( response == wxID_YES )
SavePcbFile( GetBoard()->GetFileName(), CREATE_BACKUP_FILE );
else
{
// response == wxID_NO, fall thru
}
}
wxFileName pro = fullFileName;
pro.SetExt( ProjectFileExtension );
bool is_new = !wxFileName::IsFileReadable( fullFileName );
// If its a non-existent schematic and caller thinks it exists
if( is_new && !( aCtl & KICTL_CREATE ) )
{
// notify user that fullFileName does not exist, ask if user wants to create it.
wxString ask = wxString::Format( _(
"Board '%s' does not exist. Do you wish to create it?" ),
GetChars( fullFileName )
);
if( !IsOK( this, ask ) )
return false;
}
Clear_Pcb( false ); // pass false since we prompted above for a modified board
IO_MGR::PCB_FILE_T pluginType = plugin_type( fullFileName, aCtl );
bool converted = pluginType != IO_MGR::LEGACY && pluginType != IO_MGR::KICAD;
if( !converted )
{
// PROJECT::SetProjectFullName() is an impactful function. It should only be
// called under carefully considered circumstances.
// The calling code should know not to ask me here to change projects unless
// it knows what consequences that will have on other KIFACEs running and using
// this same PROJECT. It can be very harmful if that calling code is stupid.
Prj().SetProjectFullName( pro.GetFullPath() );
// load project settings before BOARD
LoadProjectSettings();
}
if( is_new )
{
OnModify();
}
else
{
BOARD* loadedBoard = 0; // it will be set to non-NULL if loaded OK
PLUGIN::RELEASER pi( IO_MGR::PluginFind( pluginType ) );
try
{
PROPERTIES props;
char xbuf[30];
char ybuf[30];
// EAGLE_PLUGIN can use this info to center the BOARD, but it does not yet.
sprintf( xbuf, "%d", GetPageSizeIU().x );
sprintf( ybuf, "%d", GetPageSizeIU().y );
props["page_width"] = xbuf;
props["page_height"] = ybuf;
#if USE_INSTRUMENTATION
// measure the time to load a BOARD.
unsigned startTime = GetRunningMicroSecs();
#endif
loadedBoard = pi->Load( fullFileName, NULL, &props );
#if USE_INSTRUMENTATION
unsigned stopTime = GetRunningMicroSecs();
printf( "PLUGIN::Load(): %u usecs\n", stopTime - startTime );
#endif
}
catch( const IO_ERROR& ioe )
{
wxString msg = wxString::Format( _(
"Error loading board.\n%s" ),
GetChars( ioe.errorText )
);
DisplayError( this, msg );
return false;
}
SetBoard( loadedBoard );
// we should not ask PLUGINs to do these items:
loadedBoard->BuildListOfNets();
loadedBoard->SynchronizeNetsAndNetClasses();
SetStatusText( wxEmptyString );
BestZoom();
// update the layer names in the listbox
ReCreateLayerBox( false );
GetScreen()->ClrModify();
{
wxFileName fn = fullFileName;
CheckForAutoSaveFile( fullFileName, fn.GetExt() );
}
if( pluginType == IO_MGR::LEGACY &&
loadedBoard->GetFileFormatVersionAtLoad() < LEGACY_BOARD_FILE_VERSION )
{
DisplayInfoMessage( this,
_( "This file was created by an older version of Pcbnew.\n"
"It will be stored in the new file format when you save this file again." ) );
}
}
{
wxFileName fn = fullFileName;
if( converted )
fn.SetExt( PcbFileExtension );
wxString fname = fn.GetFullPath();
fname.Replace( WIN_STRING_DIR_SEP, UNIX_STRING_DIR_SEP );
GetBoard()->SetFileName( fname );
}
UpdateTitle();
if( !converted )
UpdateFileHistory( GetBoard()->GetFileName() );
// Rebuild the new pad list (for drc and ratsnet control ...)
GetBoard()->m_Status_Pcb = 0;
// Update info shown by the horizontal toolbars
SetCurrentNetClass( NETCLASS::Default );
ReFillLayerWidget();
ReCreateLayerBox();
// upate the layer widget to match board visibility states, both layers and render columns.
syncLayerVisibilities();
syncLayerWidgetLayer();
syncRenderStates();
// Update the tracks / vias available sizes list:
ReCreateAuxiliaryToolbar();
// Update the RATSNEST items, which were not loaded at the time
// BOARD::SetVisibleElements() was called from within any PLUGIN.
// See case RATSNEST_VISIBLE: in BOARD::SetElementVisibility()
GetBoard()->SetVisibleElements( GetBoard()->GetVisibleElements() );
// Display the loaded board:
Zoom_Automatique( false );
// Compile ratsnest and displays net info
{
wxBusyCursor dummy; // Displays an Hourglass while building connectivity
Compile_Ratsnest( NULL, true );
GetBoard()->GetRatsnest()->ProcessBoard();
}
SetMsgPanel( GetBoard() );
// Refresh the 3D view, if any
if( m_Draw3DFrame )
m_Draw3DFrame->NewDisplay();
#if 0 && defined(DEBUG)
// Output the board object tree to stdout, but please run from command prompt:
GetBoard()->Show( 0, std::cout );
#endif
// from EDA_APPL which was first loaded BOARD only:
{
/* For an obscure reason the focus is lost after loading a board file
* when starting up the process.
* (seems due to the recreation of the layer manager after loading the file)
* Give focus to main window and Drawpanel
* must be done for these 2 windows (for an obscure reason ...)
* Linux specific
* This is more a workaround than a fix.
*/
SetFocus();
GetCanvas()->SetFocus();
}
return true;
}
void PCB_EDIT_FRAME::Files_io_from_id( int id )
{
wxString msg;
// If an edition is in progress, stop it.
// For something else than save, get rid of current tool.
if( id == ID_SAVE_BOARD )
m_canvas->EndMouseCapture( -1, m_canvas->GetDefaultCursor() );
else
m_canvas->EndMouseCapture( ID_NO_TOOL_SELECTED, m_canvas->GetDefaultCursor() );
switch( id )
{
case ID_LOAD_FILE:
{
// LoadOnePcbFile( GetBoard()->GetFileName(), append=false, aForceFileDialog=true );
int open_ctl;
wxString fileName = Prj().AbsolutePath( GetBoard()->GetFileName() );
if( !AskLoadBoardFileName( this, &open_ctl, &fileName ) )
return;
OpenProjectFiles( std::vector<wxString>( 1, fileName ), open_ctl );
}
break;
case ID_MENU_READ_BOARD_BACKUP_FILE:
case ID_MENU_RECOVER_BOARD_AUTOSAVE:
{
wxFileName currfn = Prj().AbsolutePath( GetBoard()->GetFileName() );
wxFileName fn = currfn;
if( id == ID_MENU_RECOVER_BOARD_AUTOSAVE )
{
wxString rec_name = wxString( autosavePrefix ) + fn.GetName();
fn.SetName( rec_name );
}
else
{
wxString backup_ext = fn.GetExt()+ backupSuffix;
fn.SetExt( backup_ext );
}
if( !fn.FileExists() )
{
msg.Printf( _( "Recovery file '%s' not found." ),
GetChars( fn.GetFullPath() ) );
DisplayInfoMessage( this, msg );
break;
}
msg.Printf( _( "OK to load recovery or backup file '%s'" ),
GetChars(fn.GetFullPath() ) );
if( !IsOK( this, msg ) )
break;
GetScreen()->ClrModify(); // do not prompt the user for changes
// LoadOnePcbFile( fn.GetFullPath(), aAppend=false, aForceFileDialog=false );
OpenProjectFiles( std::vector<wxString>( 1, fn.GetFullPath() ) );
// Re-set the name since name or extension was changed
GetBoard()->SetFileName( currfn.GetFullPath() );
UpdateTitle();
}
break;
case ID_APPEND_FILE:
{
int open_ctl;
wxString fileName;
if( !AskLoadBoardFileName( this, &open_ctl, &fileName, true ) )
break;
AppendBoardFile( fileName, open_ctl );
m_canvas->Refresh();
}
break;
case ID_NEW_BOARD:
{
if( !Clear_Pcb( true ) )
break;
wxFileName fn( wxStandardPaths::Get().GetDocumentsDir(), wxT( "noname" ),
ProjectFileExtension );
Prj().SetProjectFullName( fn.GetFullPath() );
fn.SetExt( PcbFileExtension );
GetBoard()->SetFileName( fn.GetFullPath() );
UpdateTitle();
ReCreateLayerBox();
break;
}
case ID_SAVE_BOARD:
if( ! GetBoard()->GetFileName().IsEmpty() )
{
SavePcbFile( Prj().AbsolutePath( GetBoard()->GetFileName() ) );
break;
}
// Fall through
case ID_COPY_BOARD_AS:
case ID_SAVE_BOARD_AS:
{
wxString pro_dir = wxPathOnly( Prj().GetProjectFullName() );
wxFileName fn( pro_dir, _( "noname" ), KiCadPcbFileExtension );
wxString filename = fn.GetFullPath();
if( AskSaveBoardFileName( this, &filename ) )
{
if( id == ID_COPY_BOARD_AS )
SavePcbCopy( filename );
else
SavePcbFile( filename, NO_BACKUP_FILE );
}
}
break;
default:
DisplayError( this, wxT( "File_io Internal Error" ) );
break;
}
}
