NTSTATUS
EvtWmiQueryPortPropData(
IN WDFWMIINSTANCE WmiInstance,
IN ULONG OutBufferSize,
IN PVOID OutBuffer,
OUT PULONG BufferUsed
)
{
PSERIAL_DEVICE_EXTENSION pDevExt;
UNREFERENCED_PARAMETER(OutBufferSize);
PAGED_CODE();
pDevExt = SerialGetDeviceExtension (WdfWmiInstanceGetDevice(WmiInstance));
*BufferUsed = sizeof(SERIAL_COMMPROP) + sizeof(ULONG);
if (OutBufferSize < *BufferUsed) {
return STATUS_INSUFFICIENT_RESOURCES;
}
SerialGetProperties(
pDevExt,
(PSERIAL_COMMPROP)OutBuffer
);
*((PULONG)(((PSERIAL_COMMPROP)OutBuffer)->ProvChar)) = 0;
return STATUS_SUCCESS;
}
_Use_decl_annotations_
NTSTATUS
EvtWmiQueryPortPropData(
WDFWMIINSTANCE WmiInstance,
ULONG OutBufferSize,
PVOID OutBuffer,
PULONG BufferUsed
)
{
PSERIAL_DEVICE_EXTENSION devExt;
NTSTATUS status;
UNREFERENCED_PARAMETER(OutBufferSize);
PAGED_CODE();
TraceEvents(TRACE_LEVEL_INFORMATION, DBG_WMI, "++EvtWmiQueryPortPerfData()\r\n");
devExt = SerialGetDeviceExtension(WdfWmiInstanceGetDevice(WmiInstance));
*BufferUsed = sizeof(SERIAL_COMMPROP) + sizeof(ULONG);
if (OutBufferSize < *BufferUsed) {
status = STATUS_INSUFFICIENT_RESOURCES;
} else {
SerialGetProperties(devExt,
(PSERIAL_COMMPROP)OutBuffer);
*((PULONG)(((PSERIAL_COMMPROP)OutBuffer)->ProvChar)) = 0;
status = STATUS_SUCCESS;
}
TraceEvents(TRACE_LEVEL_INFORMATION, DBG_WMI, "--EvtWmiQueryPortPerfData()=%Xh\r\n", status);
return status;
}
NTSTATUS
SerialIoControl(
IN PDEVICE_OBJECT DeviceObject,
IN PIRP Irp
)
/*++
Routine Description:
This routine provides the initial processing for all of the
Ioctrls for the serial device.
Arguments:
DeviceObject - Pointer to the device object for this device
Irp - Pointer to the IRP for the current request
Return Value:
The function value is the final status of the call
--*/
{
//
// The status that gets returned to the caller and
// set in the Irp.
//
NTSTATUS Status;
//
// The current stack location. This contains all of the
// information we need to process this particular request.
//
PIO_STACK_LOCATION IrpSp;
//
// Just what it says. This is the serial specific device
// extension of the device object create for the serial driver.
//
PSERIAL_DEVICE_EXTENSION Extension = DeviceObject->DeviceExtension;
//
// A temporary to hold the old IRQL so that it can be
// restored once we complete/validate this request.
//
KIRQL OldIrql;
SerialDump(
SERIRPPATH,
("SERIAL: Dispatch entry for: %x\n",Irp)
);
if (SerialCompleteIfError(
DeviceObject,
Irp
) != STATUS_SUCCESS) {
return STATUS_CANCELLED;
}
IrpSp = IoGetCurrentIrpStackLocation(Irp);
Irp->IoStatus.Information = 0L;
Status = STATUS_SUCCESS;
switch (IrpSp->Parameters.DeviceIoControl.IoControlCode) {
case IOCTL_SERIAL_SET_BAUD_RATE : {
ULONG BaudRate;
//
// Will hold the value of the appropriate divisor for
// the requested baud rate. If the baudrate is invalid
// (because the device won't support that baud rate) then
// this value is undefined.
//
// Note: in one sense the concept of a valid baud rate
// is cloudy. We could allow the user to request any
// baud rate. We could then calculate the divisor needed
// for that baud rate. As long as the divisor wasn't less
// than one we would be "ok". (The percentage difference
// between the "true" divisor and the "rounded" value given
// to the hardware might make it unusable, but... ) It would
// really be up to the user to "Know" whether the baud rate
// is suitable. So much for theory, *We* only support a given
// set of baud rates.
//
SHORT AppropriateDivisor;
if (IrpSp->Parameters.DeviceIoControl.InputBufferLength <
sizeof(SERIAL_BAUD_RATE)) {
Status = STATUS_BUFFER_TOO_SMALL;
break;
} else {
BaudRate = ((PSERIAL_BAUD_RATE)(Irp->AssociatedIrp.SystemBuffer))->BaudRate;
}
//
// Get the baud rate from the irp. We pass it
// to a routine which will set the correct divisor.
//
Status = SerialGetDivisorFromBaud(
Extension->ClockRate,
BaudRate,
&AppropriateDivisor
);
KeAcquireSpinLock(
&Extension->ControlLock,
&OldIrql
);
if (NT_SUCCESS(Status)) {
SERIAL_IOCTL_SYNC S;
Extension->CurrentBaud = BaudRate;
S.Extension = Extension;
S.Data = (PVOID)AppropriateDivisor;
KeSynchronizeExecution(
Extension->Interrupt,
SerialSetBaud,
&S
);
}
KeReleaseSpinLock(
&Extension->ControlLock,
OldIrql
);
break;
}
case IOCTL_SERIAL_GET_BAUD_RATE: {
PSERIAL_BAUD_RATE Br = (PSERIAL_BAUD_RATE)Irp->AssociatedIrp.SystemBuffer;
if (IrpSp->Parameters.DeviceIoControl.OutputBufferLength <
sizeof(SERIAL_BAUD_RATE)) {
Status = STATUS_BUFFER_TOO_SMALL;
break;
}
KeAcquireSpinLock(
&Extension->ControlLock,
&OldIrql
);
Br->BaudRate = Extension->CurrentBaud;
KeReleaseSpinLock(
&Extension->ControlLock,
OldIrql
);
Irp->IoStatus.Information = sizeof(SERIAL_BAUD_RATE);
break;
}
case IOCTL_SERIAL_SET_LINE_CONTROL: {
//
// Points to the line control record in the Irp.
//
PSERIAL_LINE_CONTROL Lc =
((PSERIAL_LINE_CONTROL)(Irp->AssociatedIrp.SystemBuffer));
UCHAR LData;
UCHAR LStop;
UCHAR LParity;
UCHAR Mask = 0xff;
if (IrpSp->Parameters.DeviceIoControl.InputBufferLength <
sizeof(SERIAL_LINE_CONTROL)) {
Status = STATUS_BUFFER_TOO_SMALL;
break;
}
switch (Lc->WordLength) {
case 5: {
LData = SERIAL_5_DATA;
Mask = 0x1f;
break;
}
case 6: {
LData = SERIAL_6_DATA;
Mask = 0x3f;
break;
}
case 7: {
LData = SERIAL_7_DATA;
Mask = 0x7f;
break;
}
case 8: {
LData = SERIAL_8_DATA;
break;
}
default: {
Status = STATUS_INVALID_PARAMETER;
goto DoneWithIoctl;
}
}
switch (Lc->Parity) {
case NO_PARITY: {
LParity = SERIAL_NONE_PARITY;
break;
}
case EVEN_PARITY: {
LParity = SERIAL_EVEN_PARITY;
break;
}
case ODD_PARITY: {
LParity = SERIAL_ODD_PARITY;
break;
}
case SPACE_PARITY: {
LParity = SERIAL_SPACE_PARITY;
break;
}
case MARK_PARITY: {
LParity = SERIAL_MARK_PARITY;
break;
}
default: {
Status = STATUS_INVALID_PARAMETER;
goto DoneWithIoctl;
break;
}
}
switch (Lc->StopBits) {
case STOP_BIT_1: {
LStop = SERIAL_1_STOP;
break;
}
case STOP_BITS_1_5: {
if (LData != SERIAL_5_DATA) {
Status = STATUS_INVALID_PARAMETER;
goto DoneWithIoctl;
}
LStop = SERIAL_1_5_STOP;
break;
}
case STOP_BITS_2: {
if (LData == SERIAL_5_DATA) {
Status = STATUS_INVALID_PARAMETER;
goto DoneWithIoctl;
}
LStop = SERIAL_2_STOP;
break;
}
default: {
Status = STATUS_INVALID_PARAMETER;
goto DoneWithIoctl;
}
}
KeAcquireSpinLock(
&Extension->ControlLock,
&OldIrql
);
Extension->LineControl =
(UCHAR)((Extension->LineControl & SERIAL_LCR_BREAK) |
(LData | LParity | LStop));
Extension->ValidDataMask = Mask;
KeSynchronizeExecution(
Extension->Interrupt,
SerialSetLineControl,
Extension
);
KeReleaseSpinLock(
&Extension->ControlLock,
OldIrql
);
break;
}
case IOCTL_SERIAL_GET_LINE_CONTROL: {
PSERIAL_LINE_CONTROL Lc = (PSERIAL_LINE_CONTROL)Irp->AssociatedIrp.SystemBuffer;
if (IrpSp->Parameters.DeviceIoControl.OutputBufferLength <
sizeof(SERIAL_LINE_CONTROL)) {
Status = STATUS_BUFFER_TOO_SMALL;
break;
}
KeAcquireSpinLock(
&Extension->ControlLock,
&OldIrql
);
if ((Extension->LineControl & SERIAL_DATA_MASK) == SERIAL_5_DATA) {
Lc->WordLength = 5;
} else if ((Extension->LineControl & SERIAL_DATA_MASK)
== SERIAL_6_DATA) {
Lc->WordLength = 6;
} else if ((Extension->LineControl & SERIAL_DATA_MASK)
== SERIAL_7_DATA) {
Lc->WordLength = 7;
} else if ((Extension->LineControl & SERIAL_DATA_MASK)
== SERIAL_8_DATA) {
Lc->WordLength = 8;
}
if ((Extension->LineControl & SERIAL_PARITY_MASK)
== SERIAL_NONE_PARITY) {
Lc->Parity = NO_PARITY;
} else if ((Extension->LineControl & SERIAL_PARITY_MASK)
== SERIAL_ODD_PARITY) {
Lc->Parity = ODD_PARITY;
} else if ((Extension->LineControl & SERIAL_PARITY_MASK)
== SERIAL_EVEN_PARITY) {
Lc->Parity = EVEN_PARITY;
} else if ((Extension->LineControl & SERIAL_PARITY_MASK)
== SERIAL_MARK_PARITY) {
Lc->Parity = MARK_PARITY;
} else if ((Extension->LineControl & SERIAL_PARITY_MASK)
== SERIAL_SPACE_PARITY) {
Lc->Parity = SPACE_PARITY;
}
if (Extension->LineControl & SERIAL_2_STOP) {
if (Lc->WordLength == 5) {
Lc->StopBits = STOP_BITS_1_5;
} else {
Lc->StopBits = STOP_BITS_2;
}
} else {
Lc->StopBits = STOP_BIT_1;
}
Irp->IoStatus.Information = sizeof(SERIAL_LINE_CONTROL);
KeReleaseSpinLock(
&Extension->ControlLock,
OldIrql
);
break;
}
case IOCTL_SERIAL_SET_TIMEOUTS: {
PSERIAL_TIMEOUTS NewTimeouts =
((PSERIAL_TIMEOUTS)(Irp->AssociatedIrp.SystemBuffer));
if (IrpSp->Parameters.DeviceIoControl.InputBufferLength <
sizeof(SERIAL_TIMEOUTS)) {
Status = STATUS_BUFFER_TOO_SMALL;
break;
}
if ((NewTimeouts->ReadIntervalTimeout == MAXULONG) &&
(NewTimeouts->ReadTotalTimeoutMultiplier == MAXULONG) &&
(NewTimeouts->ReadTotalTimeoutConstant == MAXULONG)) {
Status = STATUS_INVALID_PARAMETER;
break;
}
KeAcquireSpinLock(
&Extension->ControlLock,
&OldIrql
);
Extension->Timeouts.ReadIntervalTimeout =
NewTimeouts->ReadIntervalTimeout;
Extension->Timeouts.ReadTotalTimeoutMultiplier =
NewTimeouts->ReadTotalTimeoutMultiplier;
Extension->Timeouts.ReadTotalTimeoutConstant =
NewTimeouts->ReadTotalTimeoutConstant;
Extension->Timeouts.WriteTotalTimeoutMultiplier =
NewTimeouts->WriteTotalTimeoutMultiplier;
Extension->Timeouts.WriteTotalTimeoutConstant =
NewTimeouts->WriteTotalTimeoutConstant;
KeReleaseSpinLock(
&Extension->ControlLock,
OldIrql
);
break;
}
case IOCTL_SERIAL_GET_TIMEOUTS: {
if (IrpSp->Parameters.DeviceIoControl.OutputBufferLength <
sizeof(SERIAL_TIMEOUTS)) {
Status = STATUS_BUFFER_TOO_SMALL;
break;
}
KeAcquireSpinLock(
&Extension->ControlLock,
&OldIrql
);
*((PSERIAL_TIMEOUTS)Irp->AssociatedIrp.SystemBuffer) = Extension->Timeouts;
Irp->IoStatus.Information = sizeof(SERIAL_TIMEOUTS);
KeReleaseSpinLock(
&Extension->ControlLock,
OldIrql
);
break;
}
case IOCTL_SERIAL_SET_CHARS: {
SERIAL_IOCTL_SYNC S;
PSERIAL_CHARS NewChars =
((PSERIAL_CHARS)(Irp->AssociatedIrp.SystemBuffer));
if (IrpSp->Parameters.DeviceIoControl.InputBufferLength <
sizeof(SERIAL_CHARS)) {
Status = STATUS_BUFFER_TOO_SMALL;
break;
}
//
// The only thing that can be wrong with the chars
// is that the xon and xoff characters are the
// same.
//
#if 0
if (NewChars->XonChar == NewChars->XoffChar) {
Status = STATUS_INVALID_PARAMETER;
break;
}
#endif
//
// We acquire the control lock so that only
// one request can GET or SET the characters
// at a time. The sets could be synchronized
// by the interrupt spinlock, but that wouldn't
// prevent multiple gets at the same time.
//
S.Extension = Extension;
S.Data = NewChars;
KeAcquireSpinLock(
&Extension->ControlLock,
&OldIrql
);
//
// Under the protection of the lock, make sure that
// the xon and xoff characters aren't the same as
// the escape character.
//
if (Extension->EscapeChar) {
if ((Extension->EscapeChar == NewChars->XonChar) ||
(Extension->EscapeChar == NewChars->XoffChar)) {
Status = STATUS_INVALID_PARAMETER;
KeReleaseSpinLock(
&Extension->ControlLock,
OldIrql
);
break;
}
}
KeSynchronizeExecution(
Extension->Interrupt,
SerialSetChars,
&S
);
KeReleaseSpinLock(
&Extension->ControlLock,
OldIrql
);
break;
}
case IOCTL_SERIAL_GET_CHARS: {
if (IrpSp->Parameters.DeviceIoControl.OutputBufferLength <
sizeof(SERIAL_CHARS)) {
Status = STATUS_BUFFER_TOO_SMALL;
break;
}
KeAcquireSpinLock(
&Extension->ControlLock,
&OldIrql
);
*((PSERIAL_CHARS)Irp->AssociatedIrp.SystemBuffer) = Extension->SpecialChars;
Irp->IoStatus.Information = sizeof(SERIAL_CHARS);
KeReleaseSpinLock(
&Extension->ControlLock,
OldIrql
);
break;
}
case IOCTL_SERIAL_SET_DTR:
case IOCTL_SERIAL_CLR_DTR: {
//
// We acquire the lock so that we can check whether
// automatic dtr flow control is enabled. If it is
// then we return an error since the app is not allowed
// to touch this if it is automatic.
//
KeAcquireSpinLock(
&Extension->ControlLock,
&OldIrql
);
if ((Extension->HandFlow.ControlHandShake & SERIAL_DTR_MASK)
== SERIAL_DTR_HANDSHAKE) {
Irp->IoStatus.Status = STATUS_INVALID_PARAMETER;
} else {
KeSynchronizeExecution(
Extension->Interrupt,
((IrpSp->Parameters.DeviceIoControl.IoControlCode ==
IOCTL_SERIAL_SET_DTR)?
(SerialSetDTR):(SerialClrDTR)),
Extension
);
}
KeReleaseSpinLock(
&Extension->ControlLock,
OldIrql
);
break;
}
case IOCTL_SERIAL_RESET_DEVICE: {
break;
}
case IOCTL_SERIAL_SET_RTS:
case IOCTL_SERIAL_CLR_RTS: {
//
// We acquire the lock so that we can check whether
// automatic rts flow control or transmit toggleing
// is enabled. If it is then we return an error since
// the app is not allowed to touch this if it is automatic
// or toggling.
//
KeAcquireSpinLock(
&Extension->ControlLock,
&OldIrql
);
if (((Extension->HandFlow.FlowReplace & SERIAL_RTS_MASK)
== SERIAL_RTS_HANDSHAKE) ||
((Extension->HandFlow.FlowReplace & SERIAL_RTS_MASK)
== SERIAL_TRANSMIT_TOGGLE)) {
Irp->IoStatus.Status = STATUS_INVALID_PARAMETER;
} else {
KeSynchronizeExecution(
Extension->Interrupt,
((IrpSp->Parameters.DeviceIoControl.IoControlCode ==
IOCTL_SERIAL_SET_RTS)?
(SerialSetRTS):(SerialClrRTS)),
Extension
);
}
KeReleaseSpinLock(
&Extension->ControlLock,
OldIrql
);
break;
}
case IOCTL_SERIAL_SET_XOFF: {
KeSynchronizeExecution(
Extension->Interrupt,
SerialPretendXoff,
Extension
);
break;
}
case IOCTL_SERIAL_SET_XON: {
KeSynchronizeExecution(
Extension->Interrupt,
SerialPretendXon,
Extension
);
break;
}
case IOCTL_SERIAL_SET_BREAK_ON: {
KeSynchronizeExecution(
Extension->Interrupt,
SerialTurnOnBreak,
Extension
);
break;
}
case IOCTL_SERIAL_SET_BREAK_OFF: {
KeSynchronizeExecution(
Extension->Interrupt,
SerialTurnOffBreak,
Extension
);
break;
}
case IOCTL_SERIAL_SET_QUEUE_SIZE: {
//
// Type ahead buffer is fixed, so we just validate
// the the users request is not bigger that our
// own internal buffer size.
//
PSERIAL_QUEUE_SIZE Rs =
((PSERIAL_QUEUE_SIZE)(Irp->AssociatedIrp.SystemBuffer));
if (IrpSp->Parameters.DeviceIoControl.InputBufferLength <
sizeof(SERIAL_QUEUE_SIZE)) {
Status = STATUS_BUFFER_TOO_SMALL;
break;
}
//
// We have to allocate the memory for the new
// buffer while we're still in the context of the
// caller. We don't even try to protect this
// with a lock because the value could be stale
// as soon as we release the lock - The only time
// we will know for sure is when we actually try
// to do the resize.
//
if (Rs->InSize <= Extension->BufferSize) {
Status = STATUS_SUCCESS;
break;
}
try {
IrpSp->Parameters.DeviceIoControl.Type3InputBuffer =
ExAllocatePoolWithQuota(
NonPagedPool,
Rs->InSize
);
} except (EXCEPTION_EXECUTE_HANDLER) {
IrpSp->Parameters.DeviceIoControl.Type3InputBuffer = NULL;
Status = GetExceptionCode();
}
if (!IrpSp->Parameters.DeviceIoControl.Type3InputBuffer) {
break;
}
//
// Well the data passed was big enough. Do the request.
//
// There are two reason we place it in the read queue:
//
// 1) We want to serialize these resize requests so that
// they don't contend with each other.
//
// 2) We want to serialize these requests with reads since
// we don't want reads and resizes contending over the
// read buffer.
//
return SerialStartOrQueue(
Extension,
Irp,
&Extension->ReadQueue,
&Extension->CurrentReadIrp,
SerialStartRead
);
break;
}
case IOCTL_SERIAL_GET_WAIT_MASK: {
if (IrpSp->Parameters.DeviceIoControl.OutputBufferLength <
sizeof(ULONG)) {
Status = STATUS_BUFFER_TOO_SMALL;
break;
}
//
// Simple scalar read. No reason to acquire a lock.
//
Irp->IoStatus.Information = sizeof(ULONG);
*((ULONG *)Irp->AssociatedIrp.SystemBuffer) = Extension->IsrWaitMask;
break;
}
case IOCTL_SERIAL_SET_WAIT_MASK: {
ULONG NewMask;
SerialDump(
SERDIAG3 | SERIRPPATH,
("SERIAL: In Ioctl processing for set mask\n")
);
if (IrpSp->Parameters.DeviceIoControl.InputBufferLength <
sizeof(ULONG)) {
SerialDump(
SERDIAG3,
("SERIAL: Invalid size fo the buffer %d\n",
IrpSp->Parameters.DeviceIoControl.InputBufferLength)
);
Status = STATUS_BUFFER_TOO_SMALL;
break;
} else {
NewMask = *((ULONG *)Irp->AssociatedIrp.SystemBuffer);
}
//
// Make sure that the mask only contains valid
// waitable events.
//
if (NewMask & ~(SERIAL_EV_RXCHAR |
SERIAL_EV_RXFLAG |
SERIAL_EV_TXEMPTY |
SERIAL_EV_CTS |
SERIAL_EV_DSR |
SERIAL_EV_RLSD |
SERIAL_EV_BREAK |
SERIAL_EV_ERR |
SERIAL_EV_RING |
SERIAL_EV_PERR |
SERIAL_EV_RX80FULL |
SERIAL_EV_EVENT1 |
SERIAL_EV_EVENT2)) {
SerialDump(
SERDIAG3,
("SERIAL: Unknown mask %x\n",NewMask)
);
Status = STATUS_INVALID_PARAMETER;
break;
}
//
// Either start this irp or put it on the
// queue.
//
SerialDump(
SERDIAG3 | SERIRPPATH,
("SERIAL: Starting or queuing set mask irp %x\n",Irp)
);
return SerialStartOrQueue(
Extension,
Irp,
&Extension->MaskQueue,
&Extension->CurrentMaskIrp,
SerialStartMask
);
}
case IOCTL_SERIAL_WAIT_ON_MASK: {
SerialDump(
SERDIAG3 | SERIRPPATH,
("SERIAL: In Ioctl processing for wait mask\n")
);
if (IrpSp->Parameters.DeviceIoControl.OutputBufferLength <
sizeof(ULONG)) {
SerialDump(
SERDIAG3,
("SERIAL: Invalid size fo the buffer %d\n",
IrpSp->Parameters.DeviceIoControl.InputBufferLength)
);
Status = STATUS_BUFFER_TOO_SMALL;
break;
}
//
// Either start this irp or put it on the
// queue.
//
SerialDump(
SERDIAG3 | SERIRPPATH,
("SERIAL: Starting or queuing wait mask irp %x\n",Irp)
);
return SerialStartOrQueue(
Extension,
Irp,
&Extension->MaskQueue,
&Extension->CurrentMaskIrp,
SerialStartMask
);
}
case IOCTL_SERIAL_IMMEDIATE_CHAR: {
KIRQL OldIrql;
if (IrpSp->Parameters.DeviceIoControl.InputBufferLength <
sizeof(UCHAR)) {
Status = STATUS_BUFFER_TOO_SMALL;
break;
}
IoAcquireCancelSpinLock(&OldIrql);
if (Extension->CurrentImmediateIrp) {
Status = STATUS_INVALID_PARAMETER;
IoReleaseCancelSpinLock(OldIrql);
} else {
//
// We can queue the char. We need to set
// a cancel routine because flow control could
// keep the char from transmitting. Make sure
// that the irp hasn't already been canceled.
//
if (Irp->Cancel) {
IoReleaseCancelSpinLock(OldIrql);
Status = STATUS_CANCELLED;
} else {
Extension->CurrentImmediateIrp = Irp;
Extension->TotalCharsQueued++;
IoReleaseCancelSpinLock(OldIrql);
SerialStartImmediate(Extension);
return STATUS_PENDING;
}
}
break;
}
case IOCTL_SERIAL_PURGE: {
ULONG Mask;
if (IrpSp->Parameters.DeviceIoControl.InputBufferLength <
sizeof(ULONG)) {
Status = STATUS_BUFFER_TOO_SMALL;
break;
}
//
// Check to make sure that the mask only has
// 0 or the other appropriate values.
//
Mask = *((ULONG *)(Irp->AssociatedIrp.SystemBuffer));
if ((!Mask) || (Mask & (~(SERIAL_PURGE_TXABORT |
SERIAL_PURGE_RXABORT |
SERIAL_PURGE_TXCLEAR |
SERIAL_PURGE_RXCLEAR
)
)
)) {
Status = STATUS_INVALID_PARAMETER;
break;
}
//
// Either start this irp or put it on the
// queue.
//
return SerialStartOrQueue(
Extension,
Irp,
&Extension->PurgeQueue,
&Extension->CurrentPurgeIrp,
SerialStartPurge
);
}
case IOCTL_SERIAL_GET_HANDFLOW: {
if (IrpSp->Parameters.DeviceIoControl.OutputBufferLength <
sizeof(SERIAL_HANDFLOW)) {
Status = STATUS_BUFFER_TOO_SMALL;
break;
}
Irp->IoStatus.Information = sizeof(SERIAL_HANDFLOW);
KeAcquireSpinLock(
&Extension->ControlLock,
&OldIrql
);
*((PSERIAL_HANDFLOW)Irp->AssociatedIrp.SystemBuffer) =
Extension->HandFlow;
KeReleaseSpinLock(
&Extension->ControlLock,
OldIrql
);
break;
}
case IOCTL_SERIAL_SET_HANDFLOW: {
SERIAL_IOCTL_SYNC S;
PSERIAL_HANDFLOW HandFlow = Irp->AssociatedIrp.SystemBuffer;
//
// Make sure that the hand shake and control is the
// right size.
//
if (IrpSp->Parameters.DeviceIoControl.InputBufferLength <
sizeof(SERIAL_HANDFLOW)) {
Status = STATUS_BUFFER_TOO_SMALL;
break;
}
//
// Make sure that there are no invalid bits set in
// the control and handshake.
//
if (HandFlow->ControlHandShake & SERIAL_CONTROL_INVALID) {
Status = STATUS_INVALID_PARAMETER;
break;
}
if (HandFlow->FlowReplace & SERIAL_FLOW_INVALID) {
Status = STATUS_INVALID_PARAMETER;
break;
}
//
// Make sure that the app hasn't set an invlid DTR mode.
//
if ((HandFlow->ControlHandShake & SERIAL_DTR_MASK) ==
SERIAL_DTR_MASK) {
Status = STATUS_INVALID_PARAMETER;
break;
}
//
// Make sure that haven't set totally invalid xon/xoff
// limits.
//
if ((HandFlow->XonLimit < 0) ||
((ULONG)HandFlow->XonLimit > Extension->BufferSize)) {
Status = STATUS_INVALID_PARAMETER;
break;
}
if ((HandFlow->XoffLimit < 0) ||
((ULONG)HandFlow->XoffLimit > Extension->BufferSize)) {
Status = STATUS_INVALID_PARAMETER;
break;
}
S.Extension = Extension;
S.Data = HandFlow;
KeAcquireSpinLock(
&Extension->ControlLock,
&OldIrql
);
//
// Under the protection of the lock, make sure that
// we aren't turning on error replacement when we
// are doing line status/modem status insertion.
//
if (Extension->EscapeChar) {
if (HandFlow->FlowReplace & SERIAL_ERROR_CHAR) {
Status = STATUS_INVALID_PARAMETER;
KeReleaseSpinLock(
&Extension->ControlLock,
OldIrql
);
break;
}
}
KeSynchronizeExecution(
Extension->Interrupt,
SerialSetHandFlow,
&S
);
KeReleaseSpinLock(
&Extension->ControlLock,
OldIrql
);
break;
}
case IOCTL_SERIAL_GET_MODEMSTATUS: {
SERIAL_IOCTL_SYNC S;
if (IrpSp->Parameters.DeviceIoControl.OutputBufferLength <
sizeof(ULONG)) {
Status = STATUS_BUFFER_TOO_SMALL;
break;
}
Irp->IoStatus.Information = sizeof(ULONG);
S.Extension = Extension;
S.Data = Irp->AssociatedIrp.SystemBuffer;
KeAcquireSpinLock(
&Extension->ControlLock,
&OldIrql
);
KeSynchronizeExecution(
Extension->Interrupt,
SerialGetModemUpdate,
&S
);
KeReleaseSpinLock(
&Extension->ControlLock,
OldIrql
);
break;
}
case IOCTL_SERIAL_GET_DTRRTS: {
ULONG ModemControl;
if (IrpSp->Parameters.DeviceIoControl.OutputBufferLength <
sizeof(ULONG)) {
Status = STATUS_BUFFER_TOO_SMALL;
break;
}
Irp->IoStatus.Information = sizeof(ULONG);
Irp->IoStatus.Status = STATUS_SUCCESS;
//
// Reading this hardware has no effect on the device.
//
ModemControl = READ_MODEM_CONTROL(Extension->Controller);
ModemControl &= SERIAL_DTR_STATE | SERIAL_RTS_STATE;
*(PULONG)Irp->AssociatedIrp.SystemBuffer = ModemControl;
break;
}
case IOCTL_SERIAL_GET_COMMSTATUS: {
SERIAL_IOCTL_SYNC S;
if (IrpSp->Parameters.DeviceIoControl.OutputBufferLength <
sizeof(SERIAL_STATUS)) {
Status = STATUS_BUFFER_TOO_SMALL;
break;
}
Irp->IoStatus.Information = sizeof(SERIAL_STATUS);
S.Extension = Extension;
S.Data = Irp->AssociatedIrp.SystemBuffer;
//
// Acquire the cancel spin lock so nothing much
// changes while were getting the state.
//
IoAcquireCancelSpinLock(&OldIrql);
KeSynchronizeExecution(
Extension->Interrupt,
SerialGetCommStatus,
&S
);
IoReleaseCancelSpinLock(OldIrql);
break;
}
case IOCTL_SERIAL_GET_PROPERTIES: {
if (IrpSp->Parameters.DeviceIoControl.OutputBufferLength <
sizeof(SERIAL_COMMPROP)) {
Status = STATUS_BUFFER_TOO_SMALL;
break;
}
//
// No synchronization is required since this information
// is "static".
//
SerialGetProperties(
Extension,
Irp->AssociatedIrp.SystemBuffer
);
Irp->IoStatus.Information = sizeof(SERIAL_COMMPROP);
Irp->IoStatus.Status = STATUS_SUCCESS;
break;
}
case IOCTL_SERIAL_XOFF_COUNTER: {
PSERIAL_XOFF_COUNTER Xc = Irp->AssociatedIrp.SystemBuffer;
if (IrpSp->Parameters.DeviceIoControl.InputBufferLength <
sizeof(SERIAL_XOFF_COUNTER)) {
Status = STATUS_BUFFER_TOO_SMALL;
break;
}
if (Xc->Counter <= 0) {
Status = STATUS_INVALID_PARAMETER;
break;
}
//
// So far so good. Put the irp onto the write queue.
//
return SerialStartOrQueue(
Extension,
Irp,
&Extension->WriteQueue,
&Extension->CurrentWriteIrp,
SerialStartWrite
);
}
case IOCTL_SERIAL_LSRMST_INSERT: {
PUCHAR escapeChar = Irp->AssociatedIrp.SystemBuffer;
//
// Make sure we get a byte.
//
if (IrpSp->Parameters.DeviceIoControl.InputBufferLength <
sizeof(UCHAR)) {
Status = STATUS_BUFFER_TOO_SMALL;
break;
}
KeAcquireSpinLock(
&Extension->ControlLock,
&OldIrql
);
if (*escapeChar) {
//
// We've got some escape work to do. We will make sure that
// the character is not the same as the Xon or Xoff character,
// or that we are already doing error replacement.
//
if ((*escapeChar == Extension->SpecialChars.XoffChar) ||
(*escapeChar == Extension->SpecialChars.XonChar) ||
(Extension->HandFlow.FlowReplace & SERIAL_ERROR_CHAR)) {
Status = STATUS_INVALID_PARAMETER;
KeReleaseSpinLock(
&Extension->ControlLock,
OldIrql
);
break;
}
}
KeSynchronizeExecution(
Extension->Interrupt,
SerialSetEscapeChar,
Irp
);
KeReleaseSpinLock(
&Extension->ControlLock,
OldIrql
);
break;
}
case IOCTL_SERIAL_CONFIG_SIZE: {
if (IrpSp->Parameters.DeviceIoControl.OutputBufferLength <
sizeof(ULONG)) {
Status = STATUS_BUFFER_TOO_SMALL;
break;
}
Irp->IoStatus.Information = sizeof(ULONG);
Irp->IoStatus.Status = STATUS_SUCCESS;
*(PULONG)Irp->AssociatedIrp.SystemBuffer = 0;
break;
}
case IOCTL_SERIAL_GET_STATS: {
if (IrpSp->Parameters.DeviceIoControl.OutputBufferLength <
sizeof(SERIALPERF_STATS)) {
Status = STATUS_BUFFER_TOO_SMALL;
break;
}
Irp->IoStatus.Information = sizeof(SERIALPERF_STATS);
Irp->IoStatus.Status = STATUS_SUCCESS;
KeSynchronizeExecution(
Extension->Interrupt,
SerialGetStats,
Irp
);
break;
}
case IOCTL_SERIAL_CLEAR_STATS: {
KeSynchronizeExecution(
Extension->Interrupt,
SerialClearStats,
Extension
);
break;
}
default: {
Status = STATUS_INVALID_PARAMETER;
break;
}
}
DoneWithIoctl:;
Irp->IoStatus.Status = Status;
SerialDump(
SERIRPPATH,
("SERIAL: Complete Irp: %x\n",Irp)
);
IoCompleteRequest(
Irp,
0
);
return Status;
}