/**
* mu3d_hal_prepare_rx_gpd - prepare rx gpd/bd
* @args - arg1: gpd address, arg2: data buffer address, arg3: data length, arg4: ep number, arg5: with bd or not, arg6: write hwo bit or not, arg7: write ioc bit or not
*/
TGPD *mu3d_hal_prepare_rx_gpd(TGPD *gpd, dma_addr_t pBuf, DEV_UINT32 data_len,
DEV_UINT8 ep_num, DEV_UINT8 _is_bdp, DEV_UINT8 isHWO,
DEV_UINT8 ioc, DEV_UINT8 bps, DEV_UINT32 cMaxPacketSize)
{
qmu_printk(K_DEBUG, "[RX]" "%s gpd=%p, epnum=%d, len=%d\n", __func__,
gpd, ep_num, data_len);
/*Set actual data point to "DATA Buffer" */
TGPD_SET_DATA(gpd, pBuf);
/*Clear "BDP(Buffer Descriptor Present)" flag */
TGPD_CLR_FORMAT_BDP(gpd);
/*
* Set "Allow Data Buffer Length" =
* 0 (If data length > GPD buffer length, use BDs),
* data_len (If data length < GPD buffer length, only use GPD)
*/
TGPD_SET_DataBUF_LEN(gpd, data_len);
/*Set "Transferred Data Length" = 0 */
TGPD_SET_BUF_LEN(gpd, 0);
/*Default: bps=false */
TGPD_CLR_FORMAT_BPS(gpd);
/*Default: ioc=true */
TGPD_SET_FORMAT_IOC(gpd);
/*Get the next GPD */
Rx_gpd_end[ep_num] = get_gpd(USB_RX, ep_num);
qmu_printk(K_DEBUG, "[RX]" "Rx_gpd_end[%d]=%p gpd=%p\n", ep_num, Rx_gpd_end[ep_num], gpd);
/* BUG_ON(!check_next_gpd(gpd, Rx_gpd_end[ep_num])); */
/*Initialize the new GPD */
memset(Rx_gpd_end[ep_num], 0, sizeof(TGPD) + AT_GPD_EXT_LEN);
/*Clear "HWO(Hardware Own)" flag */
TGPD_CLR_FLAGS_HWO(Rx_gpd_end[ep_num]);
/*Set Next GDP pointer to the next GPD */
TGPD_SET_NEXT(gpd, virt_to_phys(Rx_gpd_end[ep_num]));
/*Default: isHWO=true */
TGPD_SET_CHKSUM(gpd, CHECKSUM_LENGTH); /*Set GPD Checksum */
TGPD_SET_FLAGS_HWO(gpd); /*Set HWO flag */
/* os_printk(K_DEBUG,"Rx gpd info { HWO %d, Next_GPD %x ,DataBufferLength %d, DataBuffer %x, Recived Len %d, Endpoint %d, TGL %d, ZLP %d}\n", */
/* (DEV_UINT32)TGPD_GET_FLAG(gpd), (DEV_UINT32)TGPD_GET_NEXT(gpd), */
/* (DEV_UINT32)TGPD_GET_DataBUF_LEN(gpd), (DEV_UINT32)TGPD_GET_DATA(gpd), */
/* (DEV_UINT32)TGPD_GET_BUF_LEN(gpd), (DEV_UINT32)TGPD_GET_EPaddr(gpd), */
/* (DEV_UINT32)TGPD_GET_TGL(gpd), (DEV_UINT32)TGPD_GET_ZLP(gpd)); */
/*Flush the data of GPD stuct to device */
dma_sync_single_for_device(NULL, virt_to_phys(gpd), sizeof(TGPD) + AT_GPD_EXT_LEN,
DMA_TO_DEVICE);
return gpd;
}
/**
* mu3d_hal_prepare_tx_gpd - prepare tx gpd/bd
* @args - arg1: gpd address, arg2: data buffer address, arg3: data length, arg4: ep number, arg5: with bd or not, arg6: write hwo bit or not, arg7: write ioc bit or not
*/
TGPD *mu3d_hal_prepare_tx_gpd(TGPD *gpd, dma_addr_t pBuf, DEV_UINT32 data_len,
DEV_UINT8 ep_num, DEV_UINT8 _is_bdp, DEV_UINT8 isHWO,
DEV_UINT8 ioc, DEV_UINT8 bps, DEV_UINT8 zlp)
{
qmu_printk(K_DEBUG, "[TX]" "%s gpd=%p, epnum=%d, len=%d, _is_bdp=%d size(TGPD)=%d\n",
__func__, gpd, ep_num, data_len, _is_bdp, sizeof(TGPD));
/*Set actual data point to "DATA Buffer" */
TGPD_SET_DATA(gpd, pBuf);
/*Clear "BDP(Buffer Descriptor Present)" flag */
TGPD_CLR_FORMAT_BDP(gpd);
/*
* "Data Buffer Length" =
* 0 (If data length > GPD buffer length, use BDs),
* data_len (If data length < GPD buffer length, only use GPD)
*/
TGPD_SET_BUF_LEN(gpd, data_len);
/*"GPD extension length" = 0. Does not use GPD EXT!! */
TGPD_SET_EXT_LEN(gpd, 0);
/*Default: zlp=false, except type=ISOC */
TGPD_CLR_FORMAT_ZLP(gpd);
/*Default: bps=false */
TGPD_CLR_FORMAT_BPS(gpd);
/*Default: ioc=true */
TGPD_SET_FORMAT_IOC(gpd);
/*Get the next GPD */
Tx_gpd_end[ep_num] = get_gpd(USB_TX, ep_num);
qmu_printk(K_DEBUG, "[TX]" "Tx_gpd_end[%d]=%p\n", ep_num, Tx_gpd_end[ep_num]);
/*Initialize the new GPD */
memset(Tx_gpd_end[ep_num], 0, sizeof(TGPD) + AT_GPD_EXT_LEN);
/*Clear "HWO(Hardware Own)" flag */
TGPD_CLR_FLAGS_HWO(Tx_gpd_end[ep_num]);
/*Set "Next GDP pointer" as the next GPD */
TGPD_SET_NEXT(gpd, virt_to_phys(Tx_gpd_end[ep_num]));
/*Default: isHWO=true */
TGPD_SET_CHKSUM(gpd, CHECKSUM_LENGTH); /*Set GPD Checksum */
TGPD_SET_FLAGS_HWO(gpd); /*Set HWO flag */
/*Flush the data of GPD stuct to device */
dma_sync_single_for_device(NULL, virt_to_phys(gpd), sizeof(TGPD) + AT_GPD_EXT_LEN,
DMA_TO_DEVICE);
return gpd;
}
/**
* mu3d_hal_prepare_tx_gpd - prepare tx gpd/bd
* @args - arg1: gpd address, arg2: data buffer address, arg3: data length, arg4: ep number, arg5: with bd or not, arg6: write hwo bit or not, arg7: write ioc bit or not
*/
TGPD* _ex_mu3d_hal_prepare_tx_gpd(TGPD* gpd, dma_addr_t pBuf, DEV_UINT32 data_len,
DEV_UINT8 ep_num, DEV_UINT8 _is_bdp, DEV_UINT8 isHWO,
DEV_UINT8 ioc, DEV_UINT8 bps, DEV_UINT8 zlp)
{
qmu_printk(K_DEBUG, "[TX]""%s gpd=%p, epnum=%d, len=%d, zlp=%d, size(TGPD)=%lld, pBuf=%08lx\n", __func__, \
gpd, ep_num, data_len, zlp, (u64)sizeof(TGPD), (unsigned long)pBuf);
/*Set actual data point to "DATA Buffer"*/
TGPD_SET_DATA(gpd, (unsigned long)pBuf);
/*Clear "BDP(Buffer Descriptor Present)" flag*/
TGPD_CLR_FORMAT_BDP(gpd);
/*
* "Data Buffer Length" =
* 0 (If data length > GPD buffer length, use BDs),
* data_len (If data length < GPD buffer length, only use GPD)
*/
TGPD_SET_BUF_LEN(gpd, data_len);
/*"GPD extension length" = 0. Does not use GPD EXT!!*/
TGPD_SET_EXT_LEN(gpd, 0);
if (zlp)
TGPD_SET_FORMAT_ZLP(gpd);
else
TGPD_CLR_FORMAT_ZLP(gpd);
/*Default: bps=false*/
TGPD_CLR_FORMAT_BPS(gpd);
/*Default: ioc=true*/
TGPD_SET_FORMAT_IOC(gpd);
/*Get the next GPD*/
Tx_gpd_end[ep_num] = get_gpd( USB_TX, ep_num);
qmu_printk(K_DEBUG, "[TX]""Tx_gpd_end[%d]=%p\n", ep_num, Tx_gpd_end[ep_num]);
/*Initialize the new GPD*/
memset(Tx_gpd_end[ep_num], 0, sizeof(TGPD)+AT_GPD_EXT_LEN);
/*Clear "HWO(Hardware Own)" flag*/
TGPD_CLR_FLAGS_HWO(Tx_gpd_end[ep_num]);
/*Set "Next GDP pointer" as the next GPD*/
TGPD_SET_NEXT(gpd, (unsigned long)mu3d_hal_gpd_virt_to_phys(Tx_gpd_end[ep_num], USB_TX, ep_num));
/*Default: isHWO=true*/
TGPD_SET_CHKSUM( gpd, CHECKSUM_LENGTH); /*Set GPD Checksum*/
TGPD_SET_FLAGS_HWO(gpd); /*Set HWO flag*/
return gpd;
}
/**
* mu3d_hal_prepare_rx_gpd - prepare rx gpd/bd
* @args - arg1: gpd address, arg2: data buffer address, arg3: data length, arg4: ep number, arg5: with bd or not, arg6: write hwo bit or not, arg7: write ioc bit or not
*/
TGPD *mu3d_hal_prepare_rx_gpd(TGPD *gpd, dma_addr_t pBuf, DEV_UINT32 data_len,
DEV_UINT8 ep_num, DEV_UINT8 _is_bdp, DEV_UINT8 isHWO,
DEV_UINT8 ioc, DEV_UINT8 bps, DEV_UINT32 cMaxPacketSize)
{
DEV_UINT32 offset;
DEV_INT32 i;
DEV_INT32 bd_num;
DEV_UINT32 length;
TBD *bd_next;
TBD *bd_head;
TBD *bd;
DEV_UINT8 *pBuffer;
/*If data length is less than the GPD buffer size, just use GPD */
if (data_len < GPD_BUF_SIZE) {
_is_bdp = 0;
}
os_printk(K_INFO, "%s gpd=%p, epnum=%d, len=%d, _is_bdp=%d, maxp=%d\n", __func__,
gpd, ep_num, data_len, _is_bdp, cMaxPacketSize);
if (!_is_bdp) {
/*Set actual data point to "DATA Buffer" */
TGPD_SET_DATA(gpd, pBuf);
/*Clear "BDP(Buffer Descriptor Present)" flag */
TGPD_CLR_FORMAT_BDP(gpd);
} else {
/*Get the first BD */
bd_head = (TBD *) get_bd(USB_RX, ep_num);
os_printk(K_INFO, "bd_head=x%p\n", bd_head);
bd = bd_head;
os_memset(bd, 0, sizeof(TBD));
/*Date length for transfer */
length = data_len;
/*Point of data buffer */
pBuffer = (DEV_UINT8 *) (pBuf);
/*The size of BD buffer */
offset = BD_BUF_SIZE;
/*Count how many BD this transfer need. */
bd_num = (!(length % offset)) ? (length / offset) : ((length / offset) + 1);
os_printk(K_INFO, "%s bd_num=%d\n", __func__, bd_num);
/*Insert data into each BD */
for (i = 0; i < bd_num; i++) {
os_printk(K_INFO, "%s bd[%d]=%p\n", __func__, i, bd);
if (i == (bd_num - 1)) {
TBD_SET_BUF_LEN(bd, 0); /*Set "Transferred Data Length" = 0 */
/*The last one's data buffer lengnth must be precise, or the GPD will never done unless ZLP or short packet. */
/*"Allow Data Buffer Length" = the rest of data length* */
length =
(!(length % cMaxPacketSize)) ? (length) : ((length /
cMaxPacketSize) +
1) * cMaxPacketSize;
TBD_SET_DataBUF_LEN(bd, length);
TBD_SET_DATA(bd, pBuffer); /*Store the data pointer to "Data Buffer" */
TBD_SET_FLAGS_EOL(bd); /*Set "EOL" */
TBD_SET_NEXT(bd, 0); /*Set "Next BD pointer" = 0 */
TBD_SET_CHKSUM(bd, CHECKSUM_LENGTH); /*Set "BD Checksum" */
/*Flush the data of BD stuct to device */
dma_sync_single_for_device(NULL,
bd_virt_to_phys(bd, USB_RX, ep_num),
sizeof(TBD), DMA_BIDIRECTIONAL);
break;
} else {
TBD_SET_BUF_LEN(bd, 0); /*Set "Transferred Data Length" = 0 */
/*"Allow Data Buffer Length" = the MAX BD transfer size */
TBD_SET_DataBUF_LEN(bd, offset);
TBD_SET_DATA(bd, pBuffer); /*Store the data pointer to "Data Buffer" */
TBD_CLR_FLAGS_EOL(bd); /*Clear "EOL" */
/*Get the next BD */
bd_next = (TBD *) get_bd(USB_RX, ep_num);
os_memset(bd_next, 0, sizeof(TBD));
/*Set "Next BD pointer" as the next BD */
TBD_SET_NEXT(bd, bd_virt_to_phys(bd_next, USB_RX, ep_num));
TBD_SET_CHKSUM(bd, CHECKSUM_LENGTH); /*Set BD Checksum */
/*Flush the data of BD stuct to device */
dma_sync_single_for_device(NULL,
bd_virt_to_phys(bd, USB_RX, ep_num),
sizeof(TBD), DMA_BIDIRECTIONAL);
/*Calculate the left data length */
length -= offset;
/*Move to pointer of buffer */
pBuffer += offset;
/*Move to next BD */
bd = bd_next;
}
}
/*Set the BD pointer into "BD Pointer" at GPD */
TGPD_SET_DATA(gpd, bd_virt_to_phys(bd_head, USB_RX, ep_num));
/*Set "BDP(Buffer Descriptor Present)" flag */
TGPD_SET_FORMAT_BDP(gpd);
}
os_printk(K_INFO, "%s GPD data_length=%d\n", __func__, data_len);
/*
* Set "Allow Data Buffer Length" =
* 0 (If data length > GPD buffer length, use BDs),
* data_len (If data length < GPD buffer length, only use GPD)
*/
TGPD_SET_DataBUF_LEN(gpd, data_len);
/* TGPD_SET_DataBUF_LEN(gpd, gpd_buf_size); */
/*Set "Transferred Data Length" = 0 */
TGPD_SET_BUF_LEN(gpd, 0);
/*Default: bps=false */
if (bps)
TGPD_SET_FORMAT_BPS(gpd);
else
TGPD_CLR_FORMAT_BPS(gpd);
/*Default: ioc=true */
if (ioc)
TGPD_SET_FORMAT_IOC(gpd);
else
TGPD_CLR_FORMAT_IOC(gpd);
/*Get the next GPD */
Rx_gpd_end[ep_num] = get_gpd(USB_RX, ep_num);
os_printk(K_INFO, "%s Rx_gpd_end[%d]=%p\n", __func__, ep_num, Tx_gpd_end[ep_num]);
/*Initialize the new GPD */
os_memset(Rx_gpd_end[ep_num], 0, sizeof(TGPD));
/*Clear "HWO(Hardware Own)" flag */
TGPD_CLR_FLAGS_HWO(Rx_gpd_end[ep_num]);
/*Set Next GDP pointer to the next GPD */
TGPD_SET_NEXT(gpd, mu3d_hal_gpd_virt_to_phys(Rx_gpd_end[ep_num], USB_RX, ep_num));
/*Default: isHWO=true */
if (isHWO) {
TGPD_SET_CHKSUM(gpd, CHECKSUM_LENGTH); /*Set GPD Checksum */
TGPD_SET_FLAGS_HWO(gpd); /*Set HWO flag */
} else {
TGPD_CLR_FLAGS_HWO(gpd);
TGPD_SET_CHKSUM_HWO(gpd, CHECKSUM_LENGTH);
}
/* os_printk(K_DEBUG,"Rx gpd info { HWO %d, Next_GPD %x ,DataBufferLength %d, DataBuffer %x, Recived Len %d, Endpoint %d, TGL %d, ZLP %d}\n", */
/* (DEV_UINT32)TGPD_GET_FLAG(gpd), (DEV_UINT32)TGPD_GET_NEXT(gpd), */
/* (DEV_UINT32)TGPD_GET_DataBUF_LEN(gpd), (DEV_UINT32)TGPD_GET_DATA(gpd), */
/* (DEV_UINT32)TGPD_GET_BUF_LEN(gpd), (DEV_UINT32)TGPD_GET_EPaddr(gpd), */
/* (DEV_UINT32)TGPD_GET_TGL(gpd), (DEV_UINT32)TGPD_GET_ZLP(gpd)); */
/*Flush the data of GPD stuct to device */
dma_sync_single_for_device(NULL, mu3d_hal_gpd_virt_to_phys(gpd, USB_RX, ep_num),
sizeof(TGPD), DMA_BIDIRECTIONAL);
return gpd;
}
/**
* mu3d_hal_prepare_tx_gpd - prepare tx gpd/bd
* @args - arg1: gpd address, arg2: data buffer address, arg3: data length, arg4: ep number, arg5: with bd or not, arg6: write hwo bit or not, arg7: write ioc bit or not
*/
TGPD *mu3d_hal_prepare_tx_gpd(TGPD *gpd, dma_addr_t pBuf, DEV_UINT32 data_len,
DEV_UINT8 ep_num, DEV_UINT8 _is_bdp, DEV_UINT8 isHWO,
DEV_UINT8 ioc, DEV_UINT8 bps, DEV_UINT8 zlp)
{
DEV_UINT32 offset;
DEV_INT32 i;
DEV_INT32 bd_num;
DEV_UINT32 length;
TBD *bd_next;
TBD *bd_head;
TBD *bd;
DEV_UINT8 *pBuffer;
/*If data length is less than the GPD buffer size, just use GPD */
/* if (data_len <= GPD_BUF_SIZE) { */
/* _is_bdp = 0; */
/* } */
os_printk(K_INFO, "%s gpd=%p, epnum=%d, len=%d, _is_bdp=%d\n", __func__,
gpd, ep_num, data_len, _is_bdp);
if (!_is_bdp) {
/*Set actual data point to "DATA Buffer" */
TGPD_SET_DATA(gpd, pBuf);
/*Clear "BDP(Buffer Descriptor Present)" flag */
TGPD_CLR_FORMAT_BDP(gpd);
} else {
/*Get the first BD */
bd_head = (TBD *) get_bd(USB_TX, ep_num);
os_printk(K_INFO, "bd_head=x%p\n", bd_head);
bd = bd_head;
os_memset(bd, 0, sizeof(TBD));
/*Date length for transfer */
length = data_len;
/*Point of data buffer */
pBuffer = (DEV_UINT8 *) (pBuf);
/*The size of BD buffer */
offset = BD_BUF_SIZE;
/*Count how many BD this transfer need. */
bd_num = (!(length % offset)) ? (length / offset) : ((length / offset) + 1);
os_printk(K_INFO, "bd_num=%d\n", bd_num);
/*If the size of BD buffer is bigger than the length of actual transfer, use the actual length */
if (offset > length)
offset = length;
/*Insert data into each BD */
for (i = 0; i < bd_num; i++) {
os_printk(K_INFO, "bd[%d]=%p\n", i, bd);
if (i == (bd_num - 1)) { /*The last BD */
TBD_SET_EXT_LEN(bd, 0); /*"BD Extension Length" = 0. Does not use BD EXT!! */
TBD_SET_BUF_LEN(bd, length); /*"Data Buffer Length" = the rest of data length */
TBD_SET_DATA(bd, pBuffer); /*Store the data pointer to "Data Buffer" */
TBD_SET_FLAGS_EOL(bd); /*Set "EOL" */
TBD_SET_NEXT(bd, 0); /*Set "Next BD pointer" = 0 */
TBD_SET_CHKSUM(bd, CHECKSUM_LENGTH); /*Set "BD Checksum" */
/*Flush the data of BD stuct to device */
dma_sync_single_for_device(NULL,
bd_virt_to_phys(bd, USB_RX, ep_num),
sizeof(TBD), DMA_BIDIRECTIONAL);
/*There is no data left to be transfered by GPD */
/* data_len=length; */
data_len = 0;
/*There is no data left to insert BD */
length = 0;
} else {
TBD_SET_EXT_LEN(bd, 0); /*"BD Extension length" = 0. Does not use BD EXT!! */
TBD_SET_BUF_LEN(bd, offset); /*"Data Buffer Length" = the MAX BD transfer size */
TBD_SET_DATA(bd, pBuffer); /*Store the data pointer to "Data Buffer" */
TBD_CLR_FLAGS_EOL(bd); /*Clear "EOL" */
/*Get the next BD */
bd_next = (TBD *) get_bd(USB_TX, ep_num);
os_memset(bd_next, 0, sizeof(TBD));
/*Set "Next BD pointer" as the next BD */
TBD_SET_NEXT(bd, bd_virt_to_phys(bd_next, USB_TX, ep_num));
TBD_SET_CHKSUM(bd, CHECKSUM_LENGTH); /*Set BD Checksum */
/*Flush the data of BD stuct to device */
dma_sync_single_for_device(NULL,
bd_virt_to_phys(bd, USB_RX, ep_num),
sizeof(TBD), DMA_BIDIRECTIONAL);
/*Calculate the left data length */
length -= offset;
/*Move to pointer of buffer */
pBuffer += offset;
/*Move to next BD */
bd = bd_next;
}
}
/*Set the BD pointer into "BD Pointer" at GPD */
TGPD_SET_DATA(gpd, bd_virt_to_phys(bd_head, USB_TX, ep_num));
/*Set "BDP(Buffer Descriptor Present)" flag */
TGPD_SET_FORMAT_BDP(gpd);
}
os_printk(K_INFO, "%s GPD data_length=%d\n", __func__, data_len);
/*
* "Data Buffer Length" =
* 0 (If data length > GPD buffer length, use BDs),
* data_len (If data length < GPD buffer length, only use GPD)
*/
TGPD_SET_BUF_LEN(gpd, data_len);
/*"GPD extension length" = 0. Does not use GPD EXT!! */
TGPD_SET_EXT_LEN(gpd, 0);
/*Default: zlp=false, except type=ISOC */
if (zlp)
TGPD_SET_FORMAT_ZLP(gpd);
else
TGPD_CLR_FORMAT_ZLP(gpd);
/*Default: bps=false */
if (bps)
TGPD_SET_FORMAT_BPS(gpd);
else
TGPD_CLR_FORMAT_BPS(gpd);
/*Default: ioc=true */
if (ioc)
TGPD_SET_FORMAT_IOC(gpd);
else
TGPD_CLR_FORMAT_IOC(gpd);
/*Get the next GPD */
Tx_gpd_end[ep_num] = get_gpd(USB_TX, ep_num);
os_printk(K_INFO, "Tx_gpd_end[%d]=%p\n", ep_num, Tx_gpd_end[ep_num]);
/*Initialize the new GPD */
os_memset(Tx_gpd_end[ep_num], 0, sizeof(TGPD));
/*Clear "HWO(Hardware Own)" flag */
TGPD_CLR_FLAGS_HWO(Tx_gpd_end[ep_num]);
/*Set "Next GDP pointer" as the next GPD */
TGPD_SET_NEXT(gpd, mu3d_hal_gpd_virt_to_phys(Tx_gpd_end[ep_num], USB_TX, ep_num));
/*Default: isHWO=true */
if (isHWO) {
TGPD_SET_CHKSUM(gpd, CHECKSUM_LENGTH); /*Set GPD Checksum */
TGPD_SET_FLAGS_HWO(gpd); /*Set HWO flag */
} else {
TGPD_CLR_FLAGS_HWO(gpd);
TGPD_SET_CHKSUM_HWO(gpd, CHECKSUM_LENGTH);
}
/*Flush the data of GPD stuct to device */
dma_sync_single_for_device(NULL, mu3d_hal_gpd_virt_to_phys(gpd, USB_TX, ep_num),
sizeof(TGPD), DMA_BIDIRECTIONAL);
#if defined(USB_RISC_CACHE_ENABLED)
os_flushinvalidateDcache();
#endif
return gpd;
}
