/**
* @brief Returns the date entered by user, using Hyperterminal.
* @param None
* @retval Current time RTC counter value
*/
uint32_t Date_Regulate(void) {
int MMDD;
uint32_t Tmp_YY = 0xFF, Tmp_MM = 0xFF, Tmp_DD = 0xFF;
printf("\r\n================= Date Setting ==================");
printf("\r\n Please Set Year in 4 digits : ");
while (Tmp_YY == 0xFF) {
Tmp_YY = USART_4DigitScanf(9999);
}
printf(" Set year complete!");
printf("\r\n Please Set Month : ");
while (Tmp_MM == 0xFF) {
Tmp_MM = USART_2DigitScanf(12);
}
printf(" Set month complete!");
printf("\r\n Please Set Day : ");
while (Tmp_DD == 0xFF) {
Tmp_DD = USART_2DigitScanf(31);
}
TranslateIntoYear(Tmp_YY);
TranslateIntoMonth(Tmp_MM);
TranslateIntoDay(Tmp_DD);
MMDD = (Tmp_MM * 100) + Tmp_DD;
/* Save year data to unresettable backup register addr. no. 2, 3 */
BKP_WriteBackupRegister(BKP_DR2, Tmp_YY); // Save Year
BKP_WriteBackupRegister(BKP_DR3, MMDD); // Save Month and Date
printf(" Set day complete!");
/* return 0 if succeed */
return 0;
}
/**
* @brief Setting up the time by Serial USART1.
* @param None
* @retval None
*/
void RTC_SetTimeBySerial(void) {
if (BKP_ReadBackupRegister(BKP_DR1) != 0xA5A5) {
/* Backup data register value is not correct or not yet programmed (when
the first time the program is executed) */
printf("\r\n * Begin RTC initialization");
/* RTC Configuration */
RTC_Configuration();
printf("\r\n * Please set calendar");
/* setup year, month, date in 4, 2, 2 digits each */
Date_Regulate();
printf("\r\n * Please set time");
/* Adjust time by values entered by the user on the hyperterminal */
Time_Adjust();
BKP_WriteBackupRegister(BKP_DR1, 0xA5A5);
} else {
/* Check if the Power On Reset flag is set */
if (RCC_GetFlagStatus(RCC_FLAG_PORRST) != RESET) {
printf("\r\n * Power On Reset occurred....");
}
/* Check if the Pin Reset flag is set */
else if (RCC_GetFlagStatus(RCC_FLAG_PINRST) != RESET) {
printf("\r\n\n * External Reset occurred....");
}
printf("\r\n * No need to configure RTC....");
/* Check whether we've written year or month or day value before */
if(BKP_ReadBackupRegister(BKP_DR2) == 0x0000 || BKP_ReadBackupRegister(BKP_DR3) == 0x0000) {
/* setup year, month, date in 4, 2, 2 digits each */
Date_Regulate();
} else {
uint16_t YY, MD;
YY = BKP_ReadBackupRegister(BKP_DR2);
MD = BKP_ReadBackupRegister(BKP_DR3);
int month, day;
if( (MD / 1000) % 10 == 0) {
month = (MD / 100) % 10;
} else {
month = (MD / 1000) % 10 + (MD / 100) % 10 ;
}
if( (MD / 10) % 10 == 0 ) {
day = MD % 10;
} else {
day = MD - (MD / 100) * 100;
}
printf("\r\n\n Previous written calendar data found !");
printf("\r\n Written values are as follows :");
printf("\r\n Year : %d, Month : %d, Day : %d", YY, month, day);
printf("\r\n Above calendar datas will be used to set current calendar automatically\r\n");
TranslateIntoYear(YY);
TranslateIntoMonth(month);
TranslateIntoDay(day);
}
/* NVIC MUST BE CONFIGURED before branch into power on reset */
NVIC_InitTypeDef NVIC_InitStructure;
EXTI_InitTypeDef EXTI_InitStructure;
/* Configure one bit for preemption priority */
NVIC_PriorityGroupConfig(NVIC_PriorityGroup_1);
/* Enable the RTC Interrupt */
NVIC_InitStructure.NVIC_IRQChannel = RTC_IRQn;
NVIC_InitStructure.NVIC_IRQChannelPreemptionPriority = 1;
NVIC_InitStructure.NVIC_IRQChannelSubPriority = 0;
NVIC_InitStructure.NVIC_IRQChannelCmd = ENABLE;
NVIC_Init(&NVIC_InitStructure);
NVIC_InitStructure.NVIC_IRQChannel = RTCAlarm_IRQn;
NVIC_InitStructure.NVIC_IRQChannelPreemptionPriority = 0xFF;
NVIC_InitStructure.NVIC_IRQChannelSubPriority = 0;
NVIC_InitStructure.NVIC_IRQChannelCmd = ENABLE;
NVIC_Init(&NVIC_InitStructure);
/* Configure EXTI Line17 (RTC Alarm)to generate an interrupt on rising edge */
EXTI_ClearITPendingBit(EXTI_Line17);
EXTI_InitStructure.EXTI_Line = EXTI_Line17;
EXTI_InitStructure.EXTI_Trigger = EXTI_Trigger_Rising;
EXTI_Init(&EXTI_InitStructure);
/* Wait for RTC registers synchronization */
RTC_WaitForSynchro();
/* Wait until last write operation on RTC registers has finished */
RTC_WaitForLastTask();
/* Alarm in 3 second */
//RTC_SetAlarm(3);
/* Wait until last write operation on RTC registers has finished */
RTC_WaitForLastTask();
/* Enable the RTC Second, RTC Alarm interrupt */
RTC_ITConfig(RTC_IT_SEC || RTC_IT_ALR, ENABLE);
/* Wait until last write operation on RTC registers has finished */
RTC_WaitForLastTask();
}
#ifdef RTCClockOutput_Enable
/* Enable PWR and BKP clocks */
RCC_APB1PeriphClockCmd(RCC_APB1Periph_PWR | RCC_APB1Periph_BKP, ENABLE);
/* Allow access to BKP Domain */
PWR_BackupAccessCmd(ENABLE);
/* Disable the Tamper Pin */
BKP_TamperPinCmd(DISABLE); /* To output RTCCLK/64 on Tamper pin, the tamper
functionality must be disabled */
/* Enable RTC Clock Output on Tamper Pin */
BKP_RTCOutputConfig(BKP_RTCOutputSource_Second);
#endif
/* Clear reset flags */
RCC_ClearFlag();
}
/**
* @brief Main program
* @param None
* @retval None
*/
int main(void) {
/*!< At this stage the microcontroller clock setting is already configured,
this is done through SystemInit() function which is called from startup
file (startup_stm32f10x_xx.s) before to branch to application main.
To reconfigure the default setting of SystemInit() function, refer to
system_stm32f10x.c file
*/
/* System Clocks Configuration */
RCC_Configuration();
/* System Tick Configuration at 1us */
SysTick_Config(SystemCoreClock / 1000000);
#if (defined USE_EQDAS01) || (defined USE_EQDAS02)
/* TIM2 Configuration (Client & ATFC Server) */
TIM2_Configuration();
#elif defined USE_EQDAS_SERVER
/* TIM4 Configuration */
TIM4_Configuration();
#endif
/* TIM5 Configuration (GLCD & Ethernet) */
TIM5_Configuration();
/* TIM6 Configuration (RTC load) */
//TIM6_Configuration();
/* CLCD Configuration */
CLCD_Configuration();
/* GLCD Configuration */
GLCD_Configuration();
/* UART1 Configuration */
UART_Configuration();
/* RTC configuration by setting the time by Serial USART1 */
RTC_SetTimeBySerial();
/* Let user set the IP through terminal forcefully */
//ForceIPSetBySerial();
/* WIZ820io SPI1 configuration */
WIZ820io_SPI1_Configuration();
/* W5200 Configuration */
Set_network();
/* Print WIZ820io configuration */
printSysCfg();
/* EXTI Configuration */
EXTI_Configuration();
/* FatFS configuration */
f_mount(0, &fs); // mSD
//f_mount(1, &fs); // NAND
/* Display Total size of SD card in MB scale */
SD_TotalSize();
/* Scan all files in mSD card */
//scan_files(path);
/* MAL configuration */
//Set_System();
/* UMS configuration */
//Set_USBClock();
//USB_Interrupts_Config();
//USB_Init();
/* loop upon completion of USB Enumeration */
//while (bDeviceState != CONFIGURED);
/* ATFC Algorithm GPIO */
ATFC_GPIO_Configuration();
/* ATFC Parameter Initialization */
ATFCAlgorithmParameterSetup();
/* GPS-UART3 Configuration - This have to be here otherwise it wouldn't work */
GPS_Configuration();
// For TCP client's connection request delay
presentTime = my_time;
/* Create directory and sub directory in accordance with current date */
filePath = CreateDirectoryAccordingly(GetYearAndMergeToInt(), GetMonthAndMergeToInt(),
GetDayAndMergeToInt(), RTC_GetCounter() / 3600);
/* Create file in append mode in accordance with current minute */
CreateFileAppendModeAccordingly(filePath, (RTC_GetCounter() % 3600) / 60);
/* Clear GLCD to better represent waveform */
GLCD_Clear();
//BKP_WriteBackupRegister(BKP_DR8, 0);
// When everything is set, print message
printf("\r\n\n - System is ready - ");
while (1) {
#if (defined USE_EQDAS01) || (defined USE_EQDAS02)
/* Index synchronization routine -----------------------------------------------*/
if(SyncFlag) { // prevent unpleasant impuse from happening
// Index synchronization dedicated to GLCD & Ethernet
if(arrIdx != index) {
// Index synchronization
arrIdx = index;
}
}
/* End of index synchronization routine -----------------------------------------*/
if(TimerCount > 999) { // 0 ~ 999 (1000) = 1 sec
TimerCount = 0;
//my_time++; // uncomment when tcp connection is needed
/* Setup TCP Client or Server -------------------------------------------------*/
/* Please open config.h file to choose a proper board you wish to use ---------*/
/* Start TCP Client process */
ProcessTcpClient(SOCK_ZERO); // TCP Client
/* Parameter setting Server side with port 5050 in default */
ATFCTcpServer(SOCK_TWO, EQDAS_Conf_PORT); // SOCK_TWO because of flag conformity
/*------------------------------------------------------------------------------*/
/* Process Parameter Text Stream -----------------------------------------------*/
if(PCFlag) { // EQDAS Client System and ATFC Algorithm Setting
PCFlag = false;
ProcessParameterStream();
}
/* End of Parameter process ----------------------------------------------------*/
}
/* 10ms interval between points */
if(TIM5Count >= 9) {
TIM5Count = 0;
// Make a copy from raw collected data to temporary array
CopyToTmpArray(arrIdx);
// Determine KMA scale
KMAGrade = DetermineKMA(arrIdx);
// Check sign bit and apply to int container
CheckSignAndToInt(arrIdx); // this function also cuts surplus 1G
/* Switch menu & waveform display through graphic lcd */
GLCD_AxisViewWithWaveform(mode, arrIdx);
//int mATFCBit;
//mATFCBit_lcd = mAxisBuf.ATFCBit_lcd[arrIdx];
int AxisDataToATFCAlgorithm, mATFCEventDetection;
AxisDataToATFCAlgorithm = mAxisBuf.tmp_data_y_lcd[arrIdx]; // Axis Z
ATFCAlgorithm(AxisDataToATFCAlgorithm);
mATFCEventDetection = EventDetection;
/* Display KMA Intensity on Graphic LCD */
GLCD_DisplayKMAIntensity(KMAGrade, mATFCEventDetection);
/* Prevent access to volatile variable warning */
/* This have to be here in order to correct data to be used in ATFC */
/* ATFC Server side for each EQ DAS Client */
if(EQATFCFlag) {
int mYear, mMonth, mDay, mHour, mMin, mSec, mTMSec;
mYear = year; mMonth = month; mDay = day;
mHour = hour; mMin = minute; mSec = second; mTMSec = arrIdx;
int mX, mY, mZ, mATFCBit;
mX = mAxisBuf.tmp_data_x_lcd[arrIdx] >> 2;
mY = mAxisBuf.tmp_data_y_lcd[arrIdx] >> 2;
mZ = mAxisBuf.tmp_data_z_lcd[arrIdx] >> 2;
mATFCBit = mATFCEventDetection;
char ATFC_Buf[40];
sprintf(ATFC_Buf, "%04d%02d%02d_%02d%02d%02d%02d_%+05d_%+05d_%+05d_%d\r\n",
mYear, mMonth, mDay, mHour, mMin, mSec, mTMSec,
mX, mY, mZ, mATFCBit);
// Only when socket is established, allow send data
if(getSn_SR(SOCK_TWO) == SOCK_ESTABLISHED) { // SOCK_TWO : PC
/* send selected data */
send(SOCK_TWO, (uint8_t*)ATFC_Buf, strlen(ATFC_Buf), (bool)false);
}
}
// Copy to data buffer to be written through FATFS
//CopyToFatFsDataBuffer(arrIdx);
}
/* RTC 1Hz interrupt */
if(RTCTimeDisplay) { // 1Hz calibrated by RTC
RTCTimeDisplay = false;
int TimeVar;
TimeVar = RTC_GetCounter();
/* Compute hour */
THH = TimeVar / 3600;
/* Compute minute */
TMM = (TimeVar % 3600) / 60;
/* Compute second */
TSS = (TimeVar % 3600) % 60;
/* Refresh date on every 1s */
year = GetYearAndMergeToInt();
month = GetMonthAndMergeToInt();
day = GetDayAndMergeToInt();
hour = THH; minute = TMM; second = TSS; tmsecond = 0;
if(ThirtyMinuteMark == 1799) {
ThirtyMinuteMark = 0;
ThirtyMinuteFlag = true;
} else {
ThirtyMinuteMark++;
}
/* Adjust realtime clock deviation */
if(hour > 23) {
int i, currentDay, mDay, mHour, mMin, mSec;
mDay = hour / 24;
for(i=0; i<mDay; i++) {
IncreaseSingleDay();
if(i == mDay - 1) {
currentDay = (GetMonthAndMergeToInt() * 100) + GetDayAndMergeToInt();
BKP_WriteBackupRegister(BKP_DR3, currentDay); // Save Month and Date
}
}
mHour = THH % 24;
mMin = TMM;
mSec = TSS;
/* Change the current time */
RTC_SetCounter(mHour*3600 + mMin*60 + mSec);
}
}
#endif
if(ParseGPS) {
ParseGPS = false;
char *srcstr = "$GPRMC";
char *token = ","; char *processedString;
char StringYear[3], StringMonth[3], StringDay[3], StringHour[3], StringMinute[3], StringSecond[3];
int GPSYear, GPSMonth, GPSDay, GPSHour, GPSMinute, GPSSecond;
if(strncmp((char const*)GPS_Buffer, srcstr, 6) == 0) {
//printf("GPS_Buffer = %s\r\n\r\n", (char*)GPS_Buffer);
processedString = strtok((char*)GPS_Buffer, token);
processedString = strtok(NULL, token);
strncpy(StringHour, processedString, 2); StringHour[2] = 0;
strncpy(StringMinute, processedString+2, 2); StringMinute[2] = 0;
strncpy(StringSecond, processedString+4, 2); StringSecond[2] = 0;
GPSHour = atoi(StringHour) + 9; // Current Hour = StringHour + 9
GPSMinute = atoi(StringMinute);
GPSSecond = atoi(StringSecond);
int i; for(i=4; i!=0 ; i--) processedString = strtok(NULL, token);
strncpy(StringYear, processedString+4, 2); StringYear[2] = 0;
strncpy(StringMonth, processedString+2, 2); StringMonth[2] = 0;
strncpy(StringDay, processedString, 2); StringDay[2] = 0;
GPSYear = atoi(StringYear) + 2000; // Currnet Year = StringYear + 2000
GPSMonth = atoi(StringMonth);
GPSDay = atoi(StringDay);
/* The Year is chosen as criteria to the time */
if( (GPSYear == GetYearAndMergeToInt()) && ThirtyMinuteFlag ) { // only when year matches between RTC and GPS
ThirtyMinuteFlag = false;
if(GPSMonth != GetMonthAndMergeToInt() || GPSDay != GetDayAndMergeToInt() ||
GPSHour != THH || GPSMinute != TMM || GPSSecond != TSS) {
/* Change the month and day */
TranslateIntoMonth(GPSMonth);
TranslateIntoDay(GPSDay);
/* Save year data to unresettable backup register addr. no. 3 */
int MMDD; MMDD = (GPSMonth * 100) + GPSDay;
BKP_WriteBackupRegister(BKP_DR3, MMDD); // Save Month and Date
/* Change the current time */
RTC_SetCounter(GPSHour*3600 + GPSMinute*60 + GPSSecond);
printf("GPSHour = %d\r\n", GPSHour);
printf("GPSMinute = %d\r\n", GPSMinute);
printf("GPSSecond = %d\r\n\r\n", GPSSecond);
printf("GPSYear = %d\r\n", GPSYear);
printf("GPSMonth = %d\r\n", GPSMonth);
printf("GPSDay = %d\r\n\r\n", GPSDay);
printf("GPS-to-System synchronization complete!\r\n\r\n");
}
}
}
}
if(ParseUSART1) {
ParseUSART1 = false;
// run some test on SDIO
//SDIO_TEST();
#if (defined USE_EQDAS01) || (defined USE_EQDAS02)
/* Print WIZ820io configuration */
printSysCfg();
printf("\r\n");
printf("BKP_DR1 = %d\r\n", BKP_ReadBackupRegister(BKP_DR1));
printf("BKP_DR2 = %d\r\n", BKP_ReadBackupRegister(BKP_DR2));
printf("BKP_DR3 = %d\r\n", BKP_ReadBackupRegister(BKP_DR3));
printf("BKP_DR4 = %d\r\n", BKP_ReadBackupRegister(BKP_DR4));
printf("BKP_DR5 = %d\r\n", BKP_ReadBackupRegister(BKP_DR5));
printf("BKP_DR6 = %d\r\n", BKP_ReadBackupRegister(BKP_DR6));
printf("BKP_DR7 = %d\r\n", BKP_ReadBackupRegister(BKP_DR7));
printf("BKP_DR8 = %d\r\n", BKP_ReadBackupRegister(BKP_DR8));
printf("BKP_DR9 = %d\r\n", BKP_ReadBackupRegister(BKP_DR9));
printf("BKP_DR10 = %d\r\n", BKP_ReadBackupRegister(BKP_DR10));
printf("BKP_DR11 = %d\r\n", BKP_ReadBackupRegister(BKP_DR11));
printf("BKP_DR12 = %d\r\n", BKP_ReadBackupRegister(BKP_DR12));
printf("BKP_DR13 = %d\r\n", BKP_ReadBackupRegister(BKP_DR13));
printf("BKP_DR14 = %d\r\n", BKP_ReadBackupRegister(BKP_DR14));
printf("BKP_DR15 = %d\r\n", BKP_ReadBackupRegister(BKP_DR15));
printf("BKP_DR16 = %d\r\n\r\n", BKP_ReadBackupRegister(BKP_DR16));
printf("RX_BUF = %s\r\n", RX_BUF);
/*
printf("\r\nstrlen(HEADER) : %d %s", strlen(HEADER), HEADER);
printf("\r\nf_mkdir1 : ");
char *dirPath = "0:/20130517";
res = f_mkdir(dirPath);
FPrintFatResult(res);
printf("\r\nf_mkdir2 : ");
dirPath = "0:/20130517/22H-23H";
res = f_mkdir(dirPath);
FPrintFatResult(res);
char *filePath = "0:/20130517/2-23H/test.txt";
// Create log file on the drive 0
res = open_append(&fsrc, filePath);
FPrintFatResult(res);
if(res == FR_OK) {
printf("test.txt successfully created\r\n");
// Write buffer to file
int bytesWritten;
bytesWritten = f_printf(&fsrc, HEADER);
printf("\r\n%d of bytesWritten", bytesWritten);
// Close file
f_close(&fsrc);
} else if ( res == FR_EXIST ) {
printf("\r\ntest.txt already exist");
}
*/
#elif (defined) USE_EQDAS_SERVER
char buffer[40];
sprintf(buffer, "%s_%s_%s_%s_%s\r\n",
DAQBoardOne[arrIdx].Date,
DAQBoardOne[arrIdx].Time,
DAQBoardOne[arrIdx].AxisX,
DAQBoardOne[arrIdx].AxisY,
DAQBoardOne[arrIdx].AxisZ);
printf("\r\nRX_BUF : %s, strlen(RX_BUF) : %d", (char*)RX_BUF, strlen((char*)RX_BUF));
printf("\r\nstrlen(buffer) = %d\n%s", strlen(buffer), buffer);
#endif
}
// following routine is only necessary when the board works as server
#if defined USE_EQDAS_SERVER
/* Server also needs to have get CLCD going while running */
/* RTC 1Hz interrupt */
if(RTCTimeDisplay) { // 1Hz calibrated by RTC
RTCTimeDisplay = false;
/* Adjust realtime clock deviation */
if(hour > 23) {
int i, currentDay, mDay, mHour, mMin, mSec;
mDay = hour / 24;
for(i=0; i<mDay; i++) {
IncreaseSingleDay();
if(i == mDay - 1) {
currentDay = (GetMonthAndMergeToInt() * 100) + GetDayAndMergeToInt();
BKP_WriteBackupRegister(BKP_DR3, currentDay); // Save Month and Date
}
}
mHour = THH % 24;
mMin = TMM;
mSec = TSS;
/* Change the current time */
RTC_SetCounter(mHour*3600 + mMin*60 + mSec);
}
/* Display current time */
Time_Display(RTC_GetCounter());
}
/* EQ-DAQ-01 Parsing routine ------------------------------------------------- */
/* Set E1Flag indicate that we have valid connection from EQ-DAQ-01(port 5050) */
if(E1Flag) {
E1Flag = false; // clear flag since this routine excutes ceaselessly over time
ProcessTextStream(EQ_ONE, (char*)RX_BUF, E1Order);
/* PC Client Parsing routine ------------------------------------------------- */
/* Set PCFlag indicate that we have valid connection from PC Client(port 7070) */
if(PCFlag && !E2Flag) { // only when PC is connected and EQ-DAQ-02 is not connected
// Send directly to PC
SingleBoardDataToSendToPC(EQ_ONE, E1Order-10);
}
if(E1Order < 99) E1Order++;
else E1Order = 0;
}
/* EQ-DAQ-02 Parsing routine ------------------------------------------------- */
/* Set E2Flag indicate that we have valid connection from EQ-DAQ-02(port 6060) */
if(E2Flag) {
E2Flag = false;
ProcessTextStream(EQ_TWO, (char*)RX_BUF, E2Order);
/* PC Client Parsing routine ------------------------------------------------- */
/* Set PCFlag indicate that we have valid connection from PC Client(port 7070) */
if(PCFlag && !E1Flag) { // only when PC is connected and EQ-DAQ-01 is not connected
// Send directly to PC
//SendToPC(EQ_TWO, E2Order);
}
if(E2Order < 99) E2Order++;
else E2Order = 0;
/* PC Client Parsing routine ------------------------------------------------- */
/* Set PCFlag indicate that we have valid connection from PC Client(port 7070) */
if(PCFlag) {
// Send directly to PC
MultipleBoardDataToSendToPC(EQ_BOTH, E1Order-10, E2Order-10);
}
}
/* Process server socket with each port */
ProcessTcpServer(SOCK_ZERO, 5050); // designated as for EQM-DAQ-01 with port 5050
ProcessTcpServer(SOCK_ONE, 6060); // designated as for EQM-DAQ-02 with port 6060
ProcessTcpServer(SOCK_TWO, 7070); // designated as for PC-CLIENT with port 7070
ProcessTcpServer(SOCK_THREE, 8080); // designated as for PC_DUMP with port 8080
/*
ProcessTcpServer(SOCK_FOUR, 9090); // designated as for TOBEUSED with port 9090
ProcessTcpServer(SOCK_FIVE, 10010); // designated as for TOBEUSED with port 10010
ProcessTcpServer(SOCK_SIX, 10020); // designated as for TOBEUSED with port 10020
ProcessTcpServer(SOCK_SEVEN, 10030); // designated as for TOBEUSED with port 10030
*/
#endif
}