int main(int argc, char **argv)
{
signal(SIGINT, stopHandler);
signal(SIGTERM, stopHandler);
UA_Server *server = UA_Server_new();
UA_ServerConfig *config = UA_Server_getConfig(server);
UA_ServerConfig_setDefault(config);
config->customDataTypes = &customTypesArray;
UA_StatusCode retval;
/* create nodes from nodeset */
if(namespace_testnodeset_generated(server) != UA_STATUSCODE_GOOD) {
UA_LOG_ERROR(UA_Log_Stdout, UA_LOGCATEGORY_SERVER,
"Could not add the example nodeset. "
"Check previous output for any error.");
retval = UA_STATUSCODE_BADUNEXPECTEDERROR;
} else {
UA_Variant out;
UA_Variant_init(&out);
UA_Server_readValue(server, UA_NODEID_NUMERIC(2, 10002), &out);
UA_Point *p = (UA_Point *)out.data;
printf("point 2d x: %f y: %f \n", p->x, p->y);
retval = UA_Server_run(server, &running);
}
UA_Server_delete(server);
return retval == UA_STATUSCODE_GOOD ? EXIT_SUCCESS : EXIT_FAILURE;
}
int main(void) {
signal(SIGINT, stopHandler); /* catches ctrl-c */
UA_ClientConfig config = UA_ClientConfig_default;
/* default timeout is 5 seconds. Set it to 1 second here for demo */
config.timeout = 1000;
UA_Client *client = UA_Client_new(config);
/* Read the value attribute of the node. UA_Client_readValueAttribute is a
* wrapper for the raw read service available as UA_Client_Service_read. */
UA_Variant value; /* Variants can hold scalar values and arrays of any type */
UA_Variant_init(&value);
/* Endless loop reading the server time */
while (running) {
/* if already connected, this will return GOOD and do nothing */
/* if the connection is closed/errored, the connection will be reset and then reconnected */
/* Alternatively you can also use UA_Client_getState to get the current state */
UA_StatusCode retval = UA_Client_connect(client, "opc.tcp://localhost:4840");
if (retval != UA_STATUSCODE_GOOD) {
UA_LOG_ERROR(logger, UA_LOGCATEGORY_CLIENT, "Not connected. Retrying to connect in 1 second");
/* The connect may timeout after 1 second (see above) or it may fail immediately on network errors */
/* E.g. name resolution errors or unreachable network. Thus there should be a small sleep here */
UA_sleep_ms(1000);
continue;
}
/* NodeId of the variable holding the current time */
const UA_NodeId nodeId =
UA_NODEID_NUMERIC(0, UA_NS0ID_SERVER_SERVERSTATUS_CURRENTTIME);
retval = UA_Client_readValueAttribute(client, nodeId, &value);
if (retval == UA_STATUSCODE_BADCONNECTIONCLOSED) {
UA_LOG_ERROR(logger, UA_LOGCATEGORY_CLIENT, "Connection was closed. Reconnecting ...");
continue;
}
if (retval == UA_STATUSCODE_GOOD &&
UA_Variant_hasScalarType(&value, &UA_TYPES[UA_TYPES_DATETIME])) {
UA_DateTime raw_date = *(UA_DateTime *) value.data;
UA_String string_date = UA_DateTime_toString(raw_date);
UA_LOG_INFO(logger, UA_LOGCATEGORY_CLIENT, "string date is: %.*s", (int) string_date.length, string_date.data);
UA_String_deleteMembers(&string_date);
}
UA_sleep_ms(1000);
};
/* Clean up */
UA_Variant_deleteMembers(&value);
UA_Client_delete(client); /* Disconnects the client internally */
return UA_STATUSCODE_GOOD;
}
static UA_StatusCode EndpointsHandshake(UA_Client *client) {
UA_GetEndpointsRequest request;
UA_GetEndpointsRequest_init(&request);
request.requestHeader.authenticationToken = client->authenticationToken;
request.requestHeader.timestamp = UA_DateTime_now();
request.requestHeader.timeoutHint = 10000;
request.endpointUrl = client->endpointUrl;
UA_String profileUri = UA_STRING("http://opcfoundation.org/UA-Profile/Transport/uatcp-uasc-uabinary");
request.profileUris = &profileUri;
request.profileUrisSize = 1;
UA_GetEndpointsResponse response;
UA_GetEndpointsResponse_init(&response);
__UA_Client_Service(client, &request, &UA_TYPES[UA_TYPES_GETENDPOINTSREQUEST],
&response, &UA_TYPES[UA_TYPES_GETENDPOINTSRESPONSE]);
UA_Boolean endpointFound = UA_FALSE;
UA_Boolean tokenFound = UA_FALSE;
UA_String securityNone = UA_STRING("http://opcfoundation.org/UA/SecurityPolicy#None");
for(UA_Int32 i = 0; i < response.endpointsSize; i++) {
UA_EndpointDescription* endpoint = &response.endpoints[i];
/* look out for an endpoint without security */
if(!UA_String_equal(&endpoint->securityPolicyUri, &securityNone))
continue;
endpointFound = UA_TRUE;
/* endpoint with no security found */
/* look for a user token policy with an anonymous token */
for(UA_Int32 j=0; j<endpoint->userIdentityTokensSize; ++j) {
UA_UserTokenPolicy* userToken = &endpoint->userIdentityTokens[j];
if(userToken->tokenType != UA_USERTOKENTYPE_ANONYMOUS)
continue;
tokenFound = UA_TRUE;
UA_UserTokenPolicy_copy(userToken, &client->token);
break;
}
}
UA_GetEndpointsResponse_deleteMembers(&response);
if(!endpointFound) {
UA_LOG_ERROR(client->logger, UA_LOGCATEGORY_CLIENT, "No suitable endpoint found");
return UA_STATUSCODE_BADINTERNALERROR;
}
if(!tokenFound) {
UA_LOG_ERROR(client->logger, UA_LOGCATEGORY_CLIENT, "No anonymous token found");
return UA_STATUSCODE_BADINTERNALERROR;
}
return response.responseHeader.serviceResult;
}
UA_StatusCode
UA_Client_connect_iterate(UA_Client *client) {
UA_LOG_TRACE(&client->config.logger, UA_LOGCATEGORY_CLIENT,
"Client connect iterate");
if (client->connection.state == UA_CONNECTION_ESTABLISHED){
if(client->state < UA_CLIENTSTATE_WAITING_FOR_ACK) {
client->connectStatus = sendHELMessage(client);
if(client->connectStatus == UA_STATUSCODE_GOOD) {
setClientState(client, UA_CLIENTSTATE_WAITING_FOR_ACK);
} else {
client->connection.close(&client->connection);
client->connection.free(&client->connection);
}
return client->connectStatus;
}
}
/* If server is not connected */
if(client->connection.state == UA_CONNECTION_CLOSED) {
client->connectStatus = UA_STATUSCODE_BADCONNECTIONCLOSED;
UA_LOG_ERROR(&client->config.logger, UA_LOGCATEGORY_NETWORK,
"No connection to server.");
}
if(client->connectStatus != UA_STATUSCODE_GOOD) {
client->connection.close(&client->connection);
client->connection.free(&client->connection);
}
return client->connectStatus;
}
/* call only from the single networking thread */
static UA_StatusCode
ServerNetworkLayerTCP_add(ServerNetworkLayerTCP *layer, UA_Int32 newsockfd) {
UA_Connection *c = malloc(sizeof(UA_Connection));
if(!c)
return UA_STATUSCODE_BADINTERNALERROR;
struct sockaddr_in addr;
socklen_t addrlen = sizeof(struct sockaddr_in);
getsockname(newsockfd, (struct sockaddr*)&addr, &addrlen);
UA_LOG_INFO(layer->logger, UA_LOGCATEGORY_NETWORK, "New Connection %i over TCP from %s:%d",
newsockfd, inet_ntoa(addr.sin_addr), ntohs(addr.sin_port));
UA_Connection_init(c);
c->sockfd = newsockfd;
c->handle = layer;
c->localConf = layer->conf;
c->send = socket_write;
c->close = ServerNetworkLayerTCP_closeConnection;
c->getSendBuffer = ServerNetworkLayerGetSendBuffer;
c->releaseSendBuffer = ServerNetworkLayerReleaseSendBuffer;
c->releaseRecvBuffer = ServerNetworkLayerReleaseRecvBuffer;
c->state = UA_CONNECTION_OPENING;
struct ConnectionMapping *nm;
nm = realloc(layer->mappings, sizeof(struct ConnectionMapping)*(layer->mappingsSize+1));
if(!nm) {
UA_LOG_ERROR(layer->logger, UA_LOGCATEGORY_NETWORK, "No memory for a new Connection");
free(c);
return UA_STATUSCODE_BADINTERNALERROR;
}
layer->mappings = nm;
layer->mappings[layer->mappingsSize] = (struct ConnectionMapping){c, newsockfd};
layer->mappingsSize++;
return UA_STATUSCODE_GOOD;
}
/*
* Get the endpoint from the server, where we can call RegisterServer2 (or RegisterServer).
* This is normally the endpoint with highest supported encryption mode.
*
* @param discoveryServerUrl The discovery url from the remote server
* @return The endpoint description (which needs to be freed) or NULL
*/
static
UA_EndpointDescription *getRegisterEndpointFromServer(const char *discoveryServerUrl) {
UA_Client *client = UA_Client_new(UA_ClientConfig_default);
UA_EndpointDescription *endpointArray = NULL;
size_t endpointArraySize = 0;
UA_StatusCode retval = UA_Client_getEndpoints(client, discoveryServerUrl,
&endpointArraySize, &endpointArray);
if (retval != UA_STATUSCODE_GOOD) {
UA_Array_delete(endpointArray, endpointArraySize,
&UA_TYPES[UA_TYPES_ENDPOINTDESCRIPTION]);
UA_LOG_ERROR(logger, UA_LOGCATEGORY_SERVER, "GetEndpoints failed with %s", UA_StatusCode_name(retval));
UA_Client_delete(client);
return NULL;
}
UA_LOG_DEBUG(logger, UA_LOGCATEGORY_SERVER, "Server has %ld endpoints", endpointArraySize);
UA_EndpointDescription *foundEndpoint = NULL;
for (size_t i = 0; i < endpointArraySize; i++) {
UA_LOG_DEBUG(logger, UA_LOGCATEGORY_SERVER, "\tURL = %.*s, SecurityMode = %s",
(int) endpointArray[i].endpointUrl.length,
endpointArray[i].endpointUrl.data,
endpointArray[i].securityMode == UA_MESSAGESECURITYMODE_NONE ? "None" :
endpointArray[i].securityMode == UA_MESSAGESECURITYMODE_SIGN ? "Sign" :
endpointArray[i].securityMode == UA_MESSAGESECURITYMODE_SIGNANDENCRYPT ? "SignAndEncrypt" :
"Invalid"
);
// find the endpoint with highest supported security mode
if ((UA_String_equal(&endpointArray[i].securityPolicyUri, &UA_SECURITY_POLICY_NONE_URI) ||
UA_String_equal(&endpointArray[i].securityPolicyUri, &UA_SECURITY_POLICY_BASIC128_URI)) && (
foundEndpoint == NULL || foundEndpoint->securityMode < endpointArray[i].securityMode))
foundEndpoint = &endpointArray[i];
}
UA_EndpointDescription *returnEndpoint = NULL;
if (foundEndpoint != NULL) {
returnEndpoint = UA_EndpointDescription_new();
UA_EndpointDescription_copy(foundEndpoint, returnEndpoint);
}
UA_Array_delete(endpointArray, endpointArraySize,
&UA_TYPES[UA_TYPES_ENDPOINTDESCRIPTION]);
return returnEndpoint;
}
/**
* We need to decode the given binary message to get the name of the called service.
* This method is used if the connection has no channel yet.
*/
static UA_StatusCode
UA_debug_dump_setName_withoutChannel(UA_Server *server, UA_Connection *connection,
UA_ByteString *message, struct UA_dump_filename* dump_filename) {
size_t offset = 0;
UA_TcpMessageHeader tcpMessageHeader;
UA_StatusCode retval =
UA_TcpMessageHeader_decodeBinary(message, &offset, &tcpMessageHeader);
if(retval != UA_STATUSCODE_GOOD)
return retval;
dump_filename->messageType =
UA_debug_dumpGetMessageTypePrefix(tcpMessageHeader.messageTypeAndChunkType & 0x00ffffff);
if ((tcpMessageHeader.messageTypeAndChunkType & 0x00ffffff) == UA_MESSAGETYPE_MSG) {
// this should not happen in normal operation
UA_LOG_ERROR(&server->config.logger, UA_LOGCATEGORY_SERVER, "Got MSG package without channel.");
return UA_STATUSCODE_BADUNEXPECTEDERROR;
}
return UA_STATUSCODE_GOOD;
}
static void
responseActivateSession(UA_Client *client, void *userdata, UA_UInt32 requestId,
void *response) {
UA_ActivateSessionResponse *activateResponse =
(UA_ActivateSessionResponse *) response;
if(activateResponse->responseHeader.serviceResult) {
UA_LOG_ERROR(&client->config.logger, UA_LOGCATEGORY_CLIENT,
"ActivateSession failed with error code %s",
UA_StatusCode_name(activateResponse->responseHeader.serviceResult));
}
client->connection.state = UA_CONNECTION_ESTABLISHED;
setClientState(client, UA_CLIENTSTATE_SESSION);
#ifdef UA_ENABLE_SUBSCRIPTIONS
/* A new session has been created. We need to clean up the subscriptions */
UA_Client_Subscriptions_clean(client);
#endif
/* Call onConnect (client_async.c) callback */
if(client->asyncConnectCall.callback)
client->asyncConnectCall.callback(client, client->asyncConnectCall.userdata,
requestId + 1,
&activateResponse->responseHeader.serviceResult);
}
/* OPN messges to renew the channel are sent asynchronous */
static UA_StatusCode
openSecureChannelAsync(UA_Client *client/*, UA_Boolean renew*/) {
/* Check if sc is still valid */
/*if(renew && client->nextChannelRenewal - UA_DateTime_nowMonotonic () > 0)
return UA_STATUSCODE_GOOD;*/
UA_Connection *conn = &client->connection;
if(conn->state != UA_CONNECTION_ESTABLISHED)
return UA_STATUSCODE_BADSERVERNOTCONNECTED;
/* Prepare the OpenSecureChannelRequest */
UA_OpenSecureChannelRequest opnSecRq;
UA_OpenSecureChannelRequest_init(&opnSecRq);
opnSecRq.requestHeader.timestamp = UA_DateTime_now();
opnSecRq.requestHeader.authenticationToken = client->authenticationToken;
/*if(renew) {
opnSecRq.requestType = UA_SECURITYTOKENREQUESTTYPE_RENEW;
UA_LOG_DEBUG(&client->config.logger, UA_LOGCATEGORY_SECURECHANNEL,
"Requesting to renew the SecureChannel");
} else {*/
opnSecRq.requestType = UA_SECURITYTOKENREQUESTTYPE_ISSUE;
UA_LOG_DEBUG(&client->config.logger, UA_LOGCATEGORY_SECURECHANNEL,
"Requesting to open a SecureChannel");
//}
opnSecRq.securityMode = client->channel.securityMode;
opnSecRq.clientNonce = client->channel.localNonce;
opnSecRq.requestedLifetime = client->config.secureChannelLifeTime;
/* Prepare the entry for the linked list */
UA_UInt32 requestId = ++client->requestId;
/*AsyncServiceCall *ac = NULL;
if(renew) {
ac = (AsyncServiceCall*)UA_malloc(sizeof(AsyncServiceCall));
if (!ac)
return UA_STATUSCODE_BADOUTOFMEMORY;
ac->callback =
(UA_ClientAsyncServiceCallback) processDecodedOPNResponseAsync;
ac->responseType = &UA_TYPES[UA_TYPES_OPENSECURECHANNELRESPONSE];
ac->requestId = requestId;
ac->userdata = NULL;
}*/
/* Send the OPN message */
UA_StatusCode retval = UA_SecureChannel_sendAsymmetricOPNMessage (
&client->channel, requestId, &opnSecRq,
&UA_TYPES[UA_TYPES_OPENSECURECHANNELREQUEST]);
client->connectStatus = retval;
if(retval != UA_STATUSCODE_GOOD) {
client->connectStatus = retval;
UA_LOG_ERROR(&client->config.logger, UA_LOGCATEGORY_SECURECHANNEL,
"Sending OPN message failed with error %s",
UA_StatusCode_name(retval));
UA_Client_disconnect(client);
//if(renew)
// UA_free(ac);
return retval;
}
UA_LOG_DEBUG(&client->config.logger, UA_LOGCATEGORY_SECURECHANNEL,
"OPN message sent");
/* Store the entry for async processing and return */
/*if(renew) {
LIST_INSERT_HEAD(&client->asyncServiceCalls, ac, pointers);
return retval;
}*/
return retval;
}
int main(int argc, char **argv) {
signal(SIGINT, stopHandler); /* catches ctrl-c */
signal(SIGTERM, stopHandler);
UA_ServerConfig *config = UA_ServerConfig_new_minimal(16600, NULL);
// To enable mDNS discovery, set application type to discovery server.
config->applicationDescription.applicationType = UA_APPLICATIONTYPE_DISCOVERYSERVER;
UA_String_deleteMembers(&config->applicationDescription.applicationUri);
config->applicationDescription.applicationUri =
UA_String_fromChars("urn:open62541.example.server_multicast");
config->mdnsServerName = UA_String_fromChars("Sample Multicast Server");
// See http://www.opcfoundation.org/UA/schemas/1.03/ServerCapabilities.csv
//config.serverCapabilitiesSize = 1;
//UA_String caps = UA_String_fromChars("LDS");
//config.serverCapabilities = ∩︀
UA_Server *server = UA_Server_new(config);
self_discovery_url = &config->networkLayers[0].discoveryUrl;
/* add a variable node to the address space */
UA_Int32 myInteger = 42;
UA_NodeId myIntegerNodeId = UA_NODEID_STRING(1, "the.answer");
UA_QualifiedName myIntegerName = UA_QUALIFIEDNAME(1, "the answer");
UA_DataSource dateDataSource;
dateDataSource.read = readInteger;
dateDataSource.write = writeInteger;
UA_VariableAttributes attr = UA_VariableAttributes_default;
attr.description = UA_LOCALIZEDTEXT("en-US", "the answer");
attr.displayName = UA_LOCALIZEDTEXT("en-US", "the answer");
UA_Server_addDataSourceVariableNode(server, myIntegerNodeId,
UA_NODEID_NUMERIC(0, UA_NS0ID_OBJECTSFOLDER),
UA_NODEID_NUMERIC(0, UA_NS0ID_ORGANIZES),
myIntegerName, UA_NODEID_NULL, attr, dateDataSource,
&myInteger, NULL);
// callback which is called when a new server is detected through mDNS
UA_Server_setServerOnNetworkCallback(server, serverOnNetworkCallback, NULL);
// Start the server and call iterate to wait for the multicast discovery of the LDS
UA_StatusCode retval = UA_Server_run_startup(server);
if(retval != UA_STATUSCODE_GOOD) {
UA_LOG_ERROR(logger, UA_LOGCATEGORY_SERVER,
"Could not start the server. StatusCode %s",
UA_StatusCode_name(retval));
UA_Server_delete(server);
UA_ServerConfig_delete(config);
UA_free(discovery_url);
return 1;
}
UA_LOG_INFO(logger, UA_LOGCATEGORY_SERVER,
"Server started. Waiting for announce of LDS Server.");
while (running && discovery_url == NULL)
UA_Server_run_iterate(server, true);
if(!running) {
UA_Server_delete(server);
UA_ServerConfig_delete(config);
UA_free(discovery_url);
return 1;
}
UA_LOG_INFO(logger, UA_LOGCATEGORY_SERVER, "LDS-ME server found on %s", discovery_url);
/* Check if the server supports sign and encrypt. OPC Foundation LDS requires an encrypted session for
* RegisterServer call, our server currently uses encrpytion optionally */
UA_EndpointDescription *endpointRegister = getRegisterEndpointFromServer(discovery_url);
UA_free(discovery_url);
if (endpointRegister == NULL || endpointRegister->securityMode == UA_MESSAGESECURITYMODE_INVALID) {
UA_LOG_ERROR(logger, UA_LOGCATEGORY_SERVER, "Could not find any suitable endpoints on discovery server");
UA_Server_delete(server);
UA_ServerConfig_delete(config);
return 1;
}
UA_Client *clientRegister = getRegisterClient(endpointRegister, argc, argv);
if (!clientRegister) {
UA_LOG_FATAL(UA_Log_Stdout, UA_LOGCATEGORY_USERLAND,
"Could not create the client for remote registering");
UA_Server_delete(server);
UA_ServerConfig_delete(config);
return 1;
}
/* Connect the client */
char *endpointUrl = (char*)UA_malloc(endpointRegister->endpointUrl.length + 1);
memcpy(endpointUrl, endpointRegister->endpointUrl.data, endpointRegister->endpointUrl.length);
endpointUrl[endpointRegister->endpointUrl.length] = 0;
retval = UA_Server_addPeriodicServerRegisterCallback(server, clientRegister, endpointUrl,
10 * 60 * 1000, 500, NULL);
if(retval != UA_STATUSCODE_GOOD) {
UA_LOG_ERROR(logger, UA_LOGCATEGORY_SERVER,
"Could not create periodic job for server register. StatusCode %s",
UA_StatusCode_name(retval));
UA_free(endpointUrl);
UA_Client_disconnect(clientRegister);
UA_Client_delete(clientRegister);
UA_Server_delete(server);
UA_ServerConfig_delete(config);
return 1;
}
while (running)
UA_Server_run_iterate(server, true);
UA_Server_run_shutdown(server);
// UNregister the server from the discovery server.
retval = UA_Server_unregister_discovery(server, clientRegister);
if (retval != UA_STATUSCODE_GOOD)
UA_LOG_ERROR(logger, UA_LOGCATEGORY_SERVER,
"Could not unregister server from discovery server. "
"StatusCode %s", UA_StatusCode_name(retval));
UA_free(endpointUrl);
UA_Client_disconnect(clientRegister);
UA_Client_delete(clientRegister);
UA_Server_delete(server);
UA_ServerConfig_delete(config);
return (int)retval;
}
static UA_StatusCode
subscriberListen(UA_PubSubChannel *psc) {
UA_ByteString buffer;
UA_StatusCode retval = UA_ByteString_allocBuffer(&buffer, 512);
if(retval != UA_STATUSCODE_GOOD) {
UA_LOG_ERROR(UA_Log_Stdout, UA_LOGCATEGORY_SERVER,
"Message buffer allocation failed!");
return retval;
}
/* Receive the message. Blocks for 100ms */
retval = psc->receive(psc, &buffer, NULL, 100);
if(retval != UA_STATUSCODE_GOOD || buffer.length == 0) {
/* Workaround!! Reset buffer length. Receive can set the length to zero.
* Then the buffer is not deleted because no memory allocation is
* assumed.
* TODO: Return an error code in 'receive' instead of setting the buf
* length to zero. */
buffer.length = 512;
UA_ByteString_clear(&buffer);
return UA_STATUSCODE_GOOD;
}
/* Decode the message */
UA_LOG_INFO(UA_Log_Stdout, UA_LOGCATEGORY_USERLAND,
"Message length: %lu", (unsigned long) buffer.length);
UA_NetworkMessage networkMessage;
memset(&networkMessage, 0, sizeof(UA_NetworkMessage));
size_t currentPosition = 0;
UA_NetworkMessage_decodeBinary(&buffer, ¤tPosition, &networkMessage);
UA_ByteString_clear(&buffer);
/* Is this the correct message type? */
if(networkMessage.networkMessageType != UA_NETWORKMESSAGE_DATASET)
goto cleanup;
/* At least one DataSetMessage in the NetworkMessage? */
if(networkMessage.payloadHeaderEnabled &&
networkMessage.payloadHeader.dataSetPayloadHeader.count < 1)
goto cleanup;
/* Is this a KeyFrame-DataSetMessage? */
for(size_t j = 0; j < networkMessage.payloadHeader.dataSetPayloadHeader.count; j++) {
UA_DataSetMessage *dsm = &networkMessage.payload.dataSetPayload.dataSetMessages[j];
if(dsm->header.dataSetMessageType != UA_DATASETMESSAGE_DATAKEYFRAME)
continue;
/* Loop over the fields and print well-known content types */
for(int i = 0; i < dsm->data.keyFrameData.fieldCount; i++) {
const UA_DataType *currentType = dsm->data.keyFrameData.dataSetFields[i].value.type;
if(currentType == &UA_TYPES[UA_TYPES_BYTE]) {
UA_Byte value = *(UA_Byte *)dsm->data.keyFrameData.dataSetFields[i].value.data;
UA_LOG_INFO(UA_Log_Stdout, UA_LOGCATEGORY_USERLAND,
"Message content: [Byte] \tReceived data: %i", value);
} else if (currentType == &UA_TYPES[UA_TYPES_DATETIME]) {
UA_DateTime value = *(UA_DateTime *)dsm->data.keyFrameData.dataSetFields[i].value.data;
UA_DateTimeStruct receivedTime = UA_DateTime_toStruct(value);
UA_LOG_INFO(UA_Log_Stdout, UA_LOGCATEGORY_USERLAND,
"Message content: [DateTime] \t"
"Received date: %02i-%02i-%02i Received time: %02i:%02i:%02i",
receivedTime.year, receivedTime.month, receivedTime.day,
receivedTime.hour, receivedTime.min, receivedTime.sec);
}
}
}
cleanup:
UA_NetworkMessage_clear(&networkMessage);
return retval;
}
void __UA_Client_Service(UA_Client *client, const void *r, const UA_DataType *requestType,
void *response, const UA_DataType *responseType) {
/* Requests always begin witih a RequestHeader, therefore we can cast. */
UA_RequestHeader *request = (void*)(uintptr_t)r;
UA_StatusCode retval = UA_STATUSCODE_GOOD;
UA_init(response, responseType);
UA_ResponseHeader *respHeader = (UA_ResponseHeader*)response;
/* make sure we have a valid session */
retval = UA_Client_manuallyRenewSecureChannel(client);
if(retval != UA_STATUSCODE_GOOD) {
respHeader->serviceResult = retval;
client->state = UA_CLIENTSTATE_ERRORED;
return;
}
/* handling request parameters */
UA_NodeId_copy(&client->authenticationToken, &request->authenticationToken);
request->timestamp = UA_DateTime_now();
request->requestHandle = ++client->requestHandle;
/* Send the request */
UA_UInt32 requestId = ++client->requestId;
UA_LOG_DEBUG(client->logger, UA_LOGCATEGORY_CLIENT,
"Sending a request of type %i", requestType->typeId.identifier.numeric);
retval = UA_SecureChannel_sendBinaryMessage(&client->channel, requestId, request, requestType);
if(retval) {
if(retval == UA_STATUSCODE_BADENCODINGLIMITSEXCEEDED)
respHeader->serviceResult = UA_STATUSCODE_BADREQUESTTOOLARGE;
else
respHeader->serviceResult = retval;
client->state = UA_CLIENTSTATE_ERRORED;
return;
}
/* Retrieve the response */
// Todo: push this into the generic securechannel implementation for client and server
UA_ByteString reply;
UA_ByteString_init(&reply);
do {
retval = client->connection.recv(&client->connection, &reply, client->config.timeout);
if(retval != UA_STATUSCODE_GOOD) {
respHeader->serviceResult = retval;
client->state = UA_CLIENTSTATE_ERRORED;
return;
}
} while(!reply.data);
size_t offset = 0;
UA_SecureConversationMessageHeader msgHeader;
retval |= UA_SecureConversationMessageHeader_decodeBinary(&reply, &offset, &msgHeader);
UA_SymmetricAlgorithmSecurityHeader symHeader;
retval |= UA_SymmetricAlgorithmSecurityHeader_decodeBinary(&reply, &offset, &symHeader);
UA_SequenceHeader seqHeader;
retval |= UA_SequenceHeader_decodeBinary(&reply, &offset, &seqHeader);
UA_NodeId responseId;
retval |= UA_NodeId_decodeBinary(&reply, &offset, &responseId);
UA_NodeId expectedNodeId = UA_NODEID_NUMERIC(0, responseType->typeId.identifier.numeric +
UA_ENCODINGOFFSET_BINARY);
if(retval != UA_STATUSCODE_GOOD) {
goto finish;
}
/* Todo: we need to demux responses since a publish responses may come at any time */
if(!UA_NodeId_equal(&responseId, &expectedNodeId) || seqHeader.requestId != requestId) {
if(responseId.identifier.numeric != UA_NS0ID_SERVICEFAULT + UA_ENCODINGOFFSET_BINARY) {
UA_LOG_ERROR(client->logger, UA_LOGCATEGORY_CLIENT,
"Reply answers the wrong request. Expected ns=%i,i=%i. But retrieved ns=%i,i=%i",
expectedNodeId.namespaceIndex, expectedNodeId.identifier.numeric,
responseId.namespaceIndex, responseId.identifier.numeric);
respHeader->serviceResult = UA_STATUSCODE_BADINTERNALERROR;
} else
retval = UA_decodeBinary(&reply, &offset, respHeader, &UA_TYPES[UA_TYPES_SERVICEFAULT]);
goto finish;
}
retval = UA_decodeBinary(&reply, &offset, response, responseType);
if(retval == UA_STATUSCODE_BADENCODINGLIMITSEXCEEDED)
retval = UA_STATUSCODE_BADRESPONSETOOLARGE;
finish:
UA_SymmetricAlgorithmSecurityHeader_deleteMembers(&symHeader);
UA_ByteString_deleteMembers(&reply);
if(retval != UA_STATUSCODE_GOOD){
UA_LOG_INFO(client->logger, UA_LOGCATEGORY_CLIENT, "Error receiving the response");
client->state = UA_CLIENTSTATE_ERRORED;
respHeader->serviceResult = retval;
}
UA_LOG_DEBUG(client->logger, UA_LOGCATEGORY_CLIENT,
"Received a response of type %i", responseId.identifier.numeric);
}
int main(int argc, char **argv) {
signal(SIGINT, stopHandler); /* catches ctrl-c */
signal(SIGTERM, stopHandler);
UA_ServerConfig *config = UA_ServerConfig_new_default();
UA_String_deleteMembers(&config->applicationDescription.applicationUri);
config->applicationDescription.applicationUri =
UA_String_fromChars("urn:open62541.example.server_register");
config->mdnsServerName = UA_String_fromChars("Sample Server");
// See http://www.opcfoundation.org/UA/schemas/1.03/ServerCapabilities.csv
//config.serverCapabilitiesSize = 1;
//UA_String caps = UA_String_fromChars("LDS");
//config.serverCapabilities = ∩︀
UA_Server *server = UA_Server_new(config);
/* add a variable node to the address space */
UA_Int32 myInteger = 42;
UA_NodeId myIntegerNodeId = UA_NODEID_STRING(1, "the.answer");
UA_QualifiedName myIntegerName = UA_QUALIFIEDNAME(1, "the answer");
UA_DataSource dateDataSource;
dateDataSource.read = readInteger;
dateDataSource.write = writeInteger;
UA_VariableAttributes attr = UA_VariableAttributes_default;
attr.description = UA_LOCALIZEDTEXT("en-US", "the answer");
attr.displayName = UA_LOCALIZEDTEXT("en-US", "the answer");
UA_Server_addDataSourceVariableNode(server, myIntegerNodeId,
UA_NODEID_NUMERIC(0, UA_NS0ID_OBJECTSFOLDER),
UA_NODEID_NUMERIC(0, UA_NS0ID_ORGANIZES),
myIntegerName, UA_NODEID_NULL, attr, dateDataSource,
&myInteger, NULL);
// periodic server register after 10 Minutes, delay first register for 500ms
UA_StatusCode retval =
UA_Server_addPeriodicServerRegisterCallback(server, DISCOVERY_SERVER_ENDPOINT,
10 * 60 * 1000, 500, NULL);
// UA_StatusCode retval = UA_Server_addPeriodicServerRegisterJob(server,
// "opc.tcp://localhost:4840", 10*60*1000, 500, NULL);
if (retval != UA_STATUSCODE_GOOD) {
UA_LOG_ERROR(logger, UA_LOGCATEGORY_SERVER,
"Could not create periodic job for server register. StatusCode %s",
UA_StatusCode_name(retval));
UA_Server_delete(server);
UA_ServerConfig_delete(config);
return (int)retval;
}
retval = UA_Server_run(server, &running);
if (retval != UA_STATUSCODE_GOOD) {
UA_LOG_ERROR(logger, UA_LOGCATEGORY_SERVER,
"Could not start the server. StatusCode %s",
UA_StatusCode_name(retval));
UA_Server_delete(server);
UA_ServerConfig_delete(config);
return (int)retval;
}
// UNregister the server from the discovery server.
retval = UA_Server_unregister_discovery(server, DISCOVERY_SERVER_ENDPOINT);
//retval = UA_Server_unregister_discovery(server, "opc.tcp://localhost:4840" );
if(retval != UA_STATUSCODE_GOOD)
UA_LOG_ERROR(logger, UA_LOGCATEGORY_SERVER,
"Could not unregister server from discovery server. StatusCode %s",
UA_StatusCode_name(retval));
UA_Server_delete(server);
UA_ServerConfig_delete(config);
return (int)retval;
}
static UA_StatusCode
register_server_with_discovery_server(UA_Server *server,
UA_Client *client,
const UA_Boolean isUnregister,
const char* semaphoreFilePath) {
/* Prepare the request. Do not cleanup the request after the service call,
* as the members are stack-allocated or point into the server config. */
UA_RegisterServer2Request request;
UA_RegisterServer2Request_init(&request);
request.requestHeader.timestamp = UA_DateTime_now();
request.requestHeader.timeoutHint = 10000;
request.server.isOnline = !isUnregister;
request.server.serverUri = server->config.applicationDescription.applicationUri;
request.server.productUri = server->config.applicationDescription.productUri;
request.server.serverType = server->config.applicationDescription.applicationType;
request.server.gatewayServerUri = server->config.applicationDescription.gatewayServerUri;
if(semaphoreFilePath) {
#ifdef UA_ENABLE_DISCOVERY_SEMAPHORE
request.server.semaphoreFilePath =
UA_STRING((char*)(uintptr_t)semaphoreFilePath); /* dirty cast */
#else
UA_LOG_WARNING(&server->config.logger, UA_LOGCATEGORY_CLIENT,
"Ignoring semaphore file path. open62541 not compiled "
"with UA_ENABLE_DISCOVERY_SEMAPHORE=ON");
#endif
}
request.server.serverNames = &server->config.applicationDescription.applicationName;
request.server.serverNamesSize = 1;
/* Copy the discovery urls from the server config and the network layers*/
size_t config_discurls = server->config.applicationDescription.discoveryUrlsSize;
size_t nl_discurls = server->config.networkLayersSize;
size_t total_discurls = config_discurls + nl_discurls;
UA_STACKARRAY(UA_String, urlsBuf, total_discurls);
request.server.discoveryUrls = urlsBuf;
request.server.discoveryUrlsSize = total_discurls;
for(size_t i = 0; i < config_discurls; ++i)
request.server.discoveryUrls[i] = server->config.applicationDescription.discoveryUrls[i];
/* TODO: Add nl only if discoveryUrl not already present */
for(size_t i = 0; i < nl_discurls; ++i) {
UA_ServerNetworkLayer *nl = &server->config.networkLayers[i];
request.server.discoveryUrls[config_discurls + i] = nl->discoveryUrl;
}
#ifdef UA_ENABLE_DISCOVERY_MULTICAST
request.discoveryConfigurationSize = 1;
request.discoveryConfiguration = UA_ExtensionObject_new();
UA_ExtensionObject_init(&request.discoveryConfiguration[0]);
// Set to NODELETE so that we can just use a pointer to the mdns config
request.discoveryConfiguration[0].encoding = UA_EXTENSIONOBJECT_DECODED_NODELETE;
request.discoveryConfiguration[0].content.decoded.type = &UA_TYPES[UA_TYPES_MDNSDISCOVERYCONFIGURATION];
request.discoveryConfiguration[0].content.decoded.data = &server->config.discovery.mdns;
#endif
// First try with RegisterServer2, if that isn't implemented, use RegisterServer
UA_RegisterServer2Response response;
__UA_Client_Service(client, &request, &UA_TYPES[UA_TYPES_REGISTERSERVER2REQUEST],
&response, &UA_TYPES[UA_TYPES_REGISTERSERVER2RESPONSE]);
UA_StatusCode serviceResult = response.responseHeader.serviceResult;
UA_RegisterServer2Response_deleteMembers(&response);
UA_Array_delete(request.discoveryConfiguration,
request.discoveryConfigurationSize,
&UA_TYPES[UA_TYPES_EXTENSIONOBJECT]);
request.discoveryConfiguration = NULL;
request.discoveryConfigurationSize = 0;
if(serviceResult == UA_STATUSCODE_BADNOTIMPLEMENTED ||
serviceResult == UA_STATUSCODE_BADSERVICEUNSUPPORTED) {
/* Try RegisterServer */
UA_RegisterServerRequest request_fallback;
UA_RegisterServerRequest_init(&request_fallback);
/* Copy from RegisterServer2 request */
request_fallback.requestHeader = request.requestHeader;
request_fallback.server = request.server;
UA_RegisterServerResponse response_fallback;
__UA_Client_Service(client, &request_fallback,
&UA_TYPES[UA_TYPES_REGISTERSERVERREQUEST],
&response_fallback,
&UA_TYPES[UA_TYPES_REGISTERSERVERRESPONSE]);
serviceResult = response_fallback.responseHeader.serviceResult;
UA_RegisterServerResponse_deleteMembers(&response_fallback);
}
if(serviceResult != UA_STATUSCODE_GOOD) {
UA_LOG_ERROR(&server->config.logger, UA_LOGCATEGORY_CLIENT,
"RegisterServer/RegisterServer2 failed with statuscode %s",
UA_StatusCode_name(serviceResult));
}
return serviceResult;
}
/* Combination of UA_Client_getEndpointsInternal and getEndpoints */
static void
responseGetEndpoints(UA_Client *client, void *userdata, UA_UInt32 requestId,
void *response) {
UA_EndpointDescription* endpointArray = NULL;
size_t endpointArraySize = 0;
UA_GetEndpointsResponse* resp;
resp = (UA_GetEndpointsResponse*)response;
if (resp->responseHeader.serviceResult != UA_STATUSCODE_GOOD) {
client->connectStatus = resp->responseHeader.serviceResult;
UA_LOG_ERROR(&client->config.logger, UA_LOGCATEGORY_CLIENT,
"GetEndpointRequest failed with error code %s",
UA_StatusCode_name (client->connectStatus));
UA_GetEndpointsResponse_deleteMembers(resp);
return;
}
endpointArray = resp->endpoints;
endpointArraySize = resp->endpointsSize;
resp->endpoints = NULL;
resp->endpointsSize = 0;
UA_Boolean endpointFound = false;
UA_Boolean tokenFound = false;
UA_String securityNone = UA_STRING("http://opcfoundation.org/UA/SecurityPolicy#None");
UA_String binaryTransport = UA_STRING("http://opcfoundation.org/UA-Profile/"
"Transport/uatcp-uasc-uabinary");
// TODO: compare endpoint information with client->endpointUri
for(size_t i = 0; i < endpointArraySize; ++i) {
UA_EndpointDescription* endpoint = &endpointArray[i];
/* look out for binary transport endpoints */
/* Note: Siemens returns empty ProfileUrl, we will accept it as binary */
if(endpoint->transportProfileUri.length != 0
&& !UA_String_equal (&endpoint->transportProfileUri,
&binaryTransport))
continue;
/* Look for an endpoint corresponding to the client security policy */
if(!UA_String_equal(&endpoint->securityPolicyUri, &client->channel.securityPolicy->policyUri))
continue;
endpointFound = true;
/* Look for a user token policy with an anonymous token */
for(size_t j = 0; j < endpoint->userIdentityTokensSize; ++j) {
UA_UserTokenPolicy* userToken = &endpoint->userIdentityTokens[j];
/* Usertokens also have a security policy... */
if(userToken->securityPolicyUri.length > 0 &&
!UA_String_equal(&userToken->securityPolicyUri, &securityNone))
continue;
/* Does the token type match the client configuration? */
if((userToken->tokenType == UA_USERTOKENTYPE_ANONYMOUS &&
client->config.userIdentityToken.content.decoded.type !=
&UA_TYPES[UA_TYPES_ANONYMOUSIDENTITYTOKEN] &&
client->config.userIdentityToken.content.decoded.type != NULL) ||
(userToken->tokenType == UA_USERTOKENTYPE_USERNAME &&
client->config.userIdentityToken.content.decoded.type !=
&UA_TYPES[UA_TYPES_USERNAMEIDENTITYTOKEN]) ||
(userToken->tokenType == UA_USERTOKENTYPE_CERTIFICATE &&
client->config.userIdentityToken.content.decoded.type !=
&UA_TYPES[UA_TYPES_X509IDENTITYTOKEN]) ||
(userToken->tokenType == UA_USERTOKENTYPE_ISSUEDTOKEN &&
client->config.userIdentityToken.content.decoded.type !=
&UA_TYPES[UA_TYPES_ISSUEDIDENTITYTOKEN]))
continue;
/* Endpoint with matching usertokenpolicy found */
tokenFound = true;
UA_EndpointDescription_deleteMembers(&client->config.endpoint);
UA_EndpointDescription_copy(endpoint, &client->config.endpoint);
UA_UserTokenPolicy_deleteMembers(&client->config.userTokenPolicy);
UA_UserTokenPolicy_copy(userToken, &client->config.userTokenPolicy);
break;
}
}
UA_Array_delete(endpointArray, endpointArraySize,
&UA_TYPES[UA_TYPES_ENDPOINTDESCRIPTION]);
if(!endpointFound) {
UA_LOG_ERROR(&client->config.logger, UA_LOGCATEGORY_CLIENT,
"No suitable endpoint found");
client->connectStatus = UA_STATUSCODE_BADINTERNALERROR;
} else if(!tokenFound) {
UA_LOG_ERROR(&client->config.logger, UA_LOGCATEGORY_CLIENT,
"No suitable UserTokenPolicy found for the possible endpoints");
client->connectStatus = UA_STATUSCODE_BADINTERNALERROR;
}
requestSession(client, &requestId);
}
static UA_StatusCode
register_server_with_discovery_server(UA_Server *server,
const char* discoveryServerUrl,
const UA_Boolean isUnregister,
const char* semaphoreFilePath) {
if(!discoveryServerUrl) {
UA_LOG_ERROR(server->config.logger, UA_LOGCATEGORY_SERVER,
"No discovery server url provided");
return UA_STATUSCODE_BADINTERNALERROR;
}
/* Create the client */
UA_Client *client = UA_Client_new(UA_ClientConfig_default);
if(!client)
return UA_STATUSCODE_BADOUTOFMEMORY;
/* Connect the client */
UA_StatusCode retval = UA_Client_connect(client, discoveryServerUrl);
if(retval != UA_STATUSCODE_GOOD) {
UA_LOG_ERROR(server->config.logger, UA_LOGCATEGORY_CLIENT,
"Connecting to the discovery server failed with statuscode %s",
UA_StatusCode_name(retval));
UA_Client_delete(client);
return retval;
}
/* Prepare the request. Do not cleanup the request after the service call,
* as the members are stack-allocated or point into the server config. */
UA_RegisterServer2Request request;
UA_RegisterServer2Request_init(&request);
request.requestHeader.timestamp = UA_DateTime_now();
request.requestHeader.timeoutHint = 10000;
request.server.isOnline = !isUnregister;
request.server.serverUri = server->config.applicationDescription.applicationUri;
request.server.productUri = server->config.applicationDescription.productUri;
request.server.serverType = server->config.applicationDescription.applicationType;
request.server.gatewayServerUri = server->config.applicationDescription.gatewayServerUri;
if(semaphoreFilePath) {
#ifdef UA_ENABLE_DISCOVERY_SEMAPHORE
request.server.semaphoreFilePath =
UA_STRING((char*)(uintptr_t)semaphoreFilePath); /* dirty cast */
#else
UA_LOG_WARNING(server->config.logger, UA_LOGCATEGORY_CLIENT,
"Ignoring semaphore file path. open62541 not compiled "
"with UA_ENABLE_DISCOVERY_SEMAPHORE=ON");
#endif
}
request.server.serverNames = &server->config.applicationDescription.applicationName;
request.server.serverNamesSize = 1;
/* Copy the discovery urls from the server config and the network layers*/
size_t config_discurls = server->config.applicationDescription.discoveryUrlsSize;
size_t nl_discurls = server->config.networkLayersSize;
size_t total_discurls = config_discurls * nl_discurls;
request.server.discoveryUrls = (UA_String*)UA_alloca(sizeof(UA_String) * total_discurls);
request.server.discoveryUrlsSize = config_discurls + nl_discurls;
for(size_t i = 0; i < config_discurls; ++i)
request.server.discoveryUrls[i] = server->config.applicationDescription.discoveryUrls[i];
/* TODO: Add nl only if discoveryUrl not already present */
for(size_t i = 0; i < nl_discurls; ++i) {
UA_ServerNetworkLayer *nl = &server->config.networkLayers[i];
request.server.discoveryUrls[config_discurls + i] = nl->discoveryUrl;
}
UA_MdnsDiscoveryConfiguration mdnsConfig;
UA_MdnsDiscoveryConfiguration_init(&mdnsConfig);
request.discoveryConfigurationSize = 1;
request.discoveryConfiguration = UA_ExtensionObject_new();
UA_ExtensionObject_init(&request.discoveryConfiguration[0]);
request.discoveryConfiguration[0].encoding = UA_EXTENSIONOBJECT_DECODED_NODELETE;
request.discoveryConfiguration[0].content.decoded.type = &UA_TYPES[UA_TYPES_MDNSDISCOVERYCONFIGURATION];
request.discoveryConfiguration[0].content.decoded.data = &mdnsConfig;
mdnsConfig.mdnsServerName = server->config.mdnsServerName;
mdnsConfig.serverCapabilities = server->config.serverCapabilities;
mdnsConfig.serverCapabilitiesSize = server->config.serverCapabilitiesSize;
// First try with RegisterServer2, if that isn't implemented, use RegisterServer
UA_RegisterServer2Response response;
UA_RegisterServer2Response_init(&response);
__UA_Client_Service(client, &request, &UA_TYPES[UA_TYPES_REGISTERSERVER2REQUEST],
&response, &UA_TYPES[UA_TYPES_REGISTERSERVER2RESPONSE]);
UA_StatusCode serviceResult = response.responseHeader.serviceResult;
UA_RegisterServer2Response_deleteMembers(&response);
UA_ExtensionObject_delete(request.discoveryConfiguration);
if(serviceResult == UA_STATUSCODE_BADNOTIMPLEMENTED ||
serviceResult == UA_STATUSCODE_BADSERVICEUNSUPPORTED) {
/* Try RegisterServer */
UA_RegisterServerRequest request_fallback;
UA_RegisterServerRequest_init(&request_fallback);
/* Copy from RegisterServer2 request */
request_fallback.requestHeader = request.requestHeader;
request_fallback.server = request.server;
UA_RegisterServerResponse response_fallback;
UA_RegisterServerResponse_init(&response_fallback);
__UA_Client_Service(client, &request_fallback,
&UA_TYPES[UA_TYPES_REGISTERSERVERREQUEST],
&response_fallback,
&UA_TYPES[UA_TYPES_REGISTERSERVERRESPONSE]);
serviceResult = response_fallback.responseHeader.serviceResult;
UA_RegisterServerResponse_deleteMembers(&response_fallback);
}
if(serviceResult != UA_STATUSCODE_GOOD) {
UA_LOG_ERROR(server->config.logger, UA_LOGCATEGORY_CLIENT,
"RegisterServer/RegisterServer2 failed with statuscode %s",
UA_StatusCode_name(serviceResult));
}
UA_Client_disconnect(client);
UA_Client_delete(client);
return serviceResult;
}
int main(void) {
/*
* Example for calling FindServersOnNetwork
*/
{
UA_ServerOnNetwork *serverOnNetwork = NULL;
size_t serverOnNetworkSize = 0;
UA_Client *client = UA_Client_new();
UA_ClientConfig_setDefault(UA_Client_getConfig(client));
UA_StatusCode retval = UA_Client_findServersOnNetwork(client, DISCOVERY_SERVER_ENDPOINT, 0, 0,
0, NULL, &serverOnNetworkSize, &serverOnNetwork);
if(retval != UA_STATUSCODE_GOOD) {
UA_LOG_ERROR(UA_Log_Stdout, UA_LOGCATEGORY_SERVER,
"Could not call FindServersOnNetwork service. "
"Is the discovery server started? StatusCode %s",
UA_StatusCode_name(retval));
UA_Client_delete(client);
return EXIT_FAILURE;
}
// output all the returned/registered servers
for(size_t i = 0; i < serverOnNetworkSize; i++) {
UA_ServerOnNetwork *server = &serverOnNetwork[i];
printf("Server[%lu]: %.*s", (unsigned long) i,
(int) server->serverName.length, server->serverName.data);
printf("\n\tRecordID: %d", server->recordId);
printf("\n\tDiscovery URL: %.*s", (int) server->discoveryUrl.length,
server->discoveryUrl.data);
printf("\n\tCapabilities: ");
for(size_t j = 0; j < server->serverCapabilitiesSize; j++) {
printf("%.*s,", (int) server->serverCapabilities[j].length,
server->serverCapabilities[j].data);
}
printf("\n\n");
}
UA_Array_delete(serverOnNetwork, serverOnNetworkSize,
&UA_TYPES[UA_TYPES_SERVERONNETWORK]);
}
/* Example for calling FindServers */
UA_ApplicationDescription *applicationDescriptionArray = NULL;
size_t applicationDescriptionArraySize = 0;
UA_StatusCode retval;
{
UA_Client *client = UA_Client_new();
UA_ClientConfig_setDefault(UA_Client_getConfig(client));
retval = UA_Client_findServers(client, DISCOVERY_SERVER_ENDPOINT, 0, NULL, 0, NULL,
&applicationDescriptionArraySize, &applicationDescriptionArray);
UA_Client_delete(client);
}
if(retval != UA_STATUSCODE_GOOD) {
UA_LOG_ERROR(UA_Log_Stdout, UA_LOGCATEGORY_SERVER, "Could not call FindServers service. "
"Is the discovery server started? StatusCode %s", UA_StatusCode_name(retval));
return EXIT_FAILURE;
}
// output all the returned/registered servers
for(size_t i = 0; i < applicationDescriptionArraySize; i++) {
UA_ApplicationDescription *description = &applicationDescriptionArray[i];
printf("Server[%lu]: %.*s", (unsigned long) i, (int) description->applicationUri.length,
description->applicationUri.data);
printf("\n\tName: %.*s", (int) description->applicationName.text.length,
description->applicationName.text.data);
printf("\n\tApplication URI: %.*s", (int) description->applicationUri.length,
description->applicationUri.data);
printf("\n\tProduct URI: %.*s", (int) description->productUri.length,
description->productUri.data);
printf("\n\tType: ");
switch(description->applicationType) {
case UA_APPLICATIONTYPE_SERVER:
printf("Server");
break;
case UA_APPLICATIONTYPE_CLIENT:
printf("Client");
break;
case UA_APPLICATIONTYPE_CLIENTANDSERVER:
printf("Client and Server");
break;
case UA_APPLICATIONTYPE_DISCOVERYSERVER:
printf("Discovery Server");
break;
default:
printf("Unknown");
}
printf("\n\tDiscovery URLs:");
for(size_t j = 0; j < description->discoveryUrlsSize; j++) {
printf("\n\t\t[%lu]: %.*s", (unsigned long) j,
(int) description->discoveryUrls[j].length,
description->discoveryUrls[j].data);
}
printf("\n\n");
}
/*
* Now that we have the list of available servers, call get endpoints on all of them
*/
printf("-------- Server Endpoints --------\n");
for(size_t i = 0; i < applicationDescriptionArraySize; i++) {
UA_ApplicationDescription *description = &applicationDescriptionArray[i];
if(description->discoveryUrlsSize == 0) {
UA_LOG_INFO(UA_Log_Stdout, UA_LOGCATEGORY_CLIENT,
"[GetEndpoints] Server %.*s did not provide any discovery urls. Skipping.",
(int)description->applicationUri.length, description->applicationUri.data);
continue;
}
printf("\nEndpoints for Server[%lu]: %.*s\n", (unsigned long) i,
(int) description->applicationUri.length, description->applicationUri.data);
UA_Client *client = UA_Client_new();
UA_ClientConfig_setDefault(UA_Client_getConfig(client));
char *discoveryUrl = (char *) UA_malloc(sizeof(char) * description->discoveryUrls[0].length + 1);
memcpy(discoveryUrl, description->discoveryUrls[0].data, description->discoveryUrls[0].length);
discoveryUrl[description->discoveryUrls[0].length] = '\0';
UA_EndpointDescription *endpointArray = NULL;
size_t endpointArraySize = 0;
//TODO: adapt to the new async getEndpoint
retval = UA_Client_getEndpoints(client, discoveryUrl, &endpointArraySize, &endpointArray);
UA_free(discoveryUrl);
if(retval != UA_STATUSCODE_GOOD) {
UA_Client_disconnect(client);
UA_Client_delete(client);
break;
}
for(size_t j = 0; j < endpointArraySize; j++) {
UA_EndpointDescription *endpoint = &endpointArray[j];
printf("\n\tEndpoint[%lu]:", (unsigned long) j);
printf("\n\t\tEndpoint URL: %.*s", (int) endpoint->endpointUrl.length, endpoint->endpointUrl.data);
printf("\n\t\tTransport profile URI: %.*s", (int) endpoint->transportProfileUri.length,
endpoint->transportProfileUri.data);
printf("\n\t\tSecurity Mode: ");
switch(endpoint->securityMode) {
case UA_MESSAGESECURITYMODE_INVALID:
printf("Invalid");
break;
case UA_MESSAGESECURITYMODE_NONE:
printf("None");
break;
case UA_MESSAGESECURITYMODE_SIGN:
printf("Sign");
break;
case UA_MESSAGESECURITYMODE_SIGNANDENCRYPT:
printf("Sign and Encrypt");
break;
default:
printf("No valid security mode");
break;
}
printf("\n\t\tSecurity profile URI: %.*s", (int) endpoint->securityPolicyUri.length,
endpoint->securityPolicyUri.data);
printf("\n\t\tSecurity Level: %d", endpoint->securityLevel);
}
UA_Array_delete(endpointArray, endpointArraySize, &UA_TYPES[UA_TYPES_ENDPOINTDESCRIPTION]);
UA_Client_delete(client);
}
printf("\n");
UA_Array_delete(applicationDescriptionArray, applicationDescriptionArraySize,
&UA_TYPES[UA_TYPES_APPLICATIONDESCRIPTION]);
return EXIT_SUCCESS;
}
