/* we have 3 differents structures to update:
* the first is the real representation of the datatype
* the second is the internal representation using extents
* the last is the representation used for send operations
* If the count is ZERO we dont have to add the pdtAdd datatype. But we have to
* be sure that the pdtBase datatype is correctly initialized with all fields
* set to ZERO if it's a empty datatype.
*/
int32_t opal_datatype_add( opal_datatype_t* pdtBase, const opal_datatype_t* pdtAdd,
uint32_t count, OPAL_PTRDIFF_TYPE disp, OPAL_PTRDIFF_TYPE extent )
{
uint32_t newLength, place_needed = 0, i;
short localFlags = 0; /* no specific options yet */
dt_elem_desc_t *pLast, *pLoop = NULL;
OPAL_PTRDIFF_TYPE lb, ub, true_lb, true_ub, epsilon, old_true_ub;
/* the extent should always be positive. So a negative
* value here have a special meaning ie. default extent as
* computed by ub - lb
*/
if( extent == -1 ) extent = (pdtAdd->ub - pdtAdd->lb);
/* Deal with the special markers (OPAL_DATATYPE_LB and OPAL_DATATYPE_UB) */
if( OPAL_DATATYPE_LB == pdtAdd->id ) {
pdtBase->bdt_used |= (((uint32_t)1) << OPAL_DATATYPE_LB);
if( pdtBase->flags & OPAL_DATATYPE_FLAG_USER_LB ) {
pdtBase->lb = LMIN( pdtBase->lb, disp );
} else {
pdtBase->lb = disp;
pdtBase->flags |= OPAL_DATATYPE_FLAG_USER_LB;
}
if( (pdtBase->ub - pdtBase->lb) != (OPAL_PTRDIFF_TYPE)pdtBase->size ) {
pdtBase->flags &= ~OPAL_DATATYPE_FLAG_NO_GAPS;
}
return OPAL_SUCCESS; /* Just ignore the OPAL_DATATYPE_LOOP and OPAL_DATATYPE_END_LOOP */
} else if( OPAL_DATATYPE_UB == pdtAdd->id ) {
pdtBase->bdt_used |= (((uint32_t)1) << OPAL_DATATYPE_UB);
if( pdtBase->flags & OPAL_DATATYPE_FLAG_USER_UB ) {
pdtBase->ub = LMAX( pdtBase->ub, disp );
} else {
pdtBase->ub = disp;
pdtBase->flags |= OPAL_DATATYPE_FLAG_USER_UB;
}
if( (pdtBase->ub - pdtBase->lb) != (OPAL_PTRDIFF_TYPE)pdtBase->size ) {
pdtBase->flags &= ~OPAL_DATATYPE_FLAG_NO_GAPS;
}
return OPAL_SUCCESS; /* Just ignore the OPAL_DATATYPE_LOOP and OPAL_DATATYPE_END_LOOP */
}
/* Compute the number of entries we need in the datatype description */
OPAL_DATATYPE_COMPUTE_REQUIRED_ENTRIES( pdtAdd, count, extent, place_needed );
/*
* Compute the lower and upper bound of the datatype. We do it in 2 steps.
* First compute the lb and ub of the new datatype taking in account the
* count. Then update the lb value depending on the user markers and
* update the global lb and ub.
*/
OPAL_DATATYPE_LB_UB_CONT( count, disp, pdtAdd->lb, pdtAdd->ub, extent, lb, ub );
/* Compute the true_lb and true_ub for the datatype to be added, taking
* in account the number of repetions. These values do not include the
* potential gaps at the begining and at the end of the datatype.
*/
true_lb = lb - (pdtAdd->lb - pdtAdd->true_lb);
true_ub = ub - (pdtAdd->ub - pdtAdd->true_ub);
if( true_lb > true_ub ) {
old_true_ub = true_lb;
true_lb = true_ub;
true_ub = old_true_ub;
}
#if 0
/* Avoid claiming overlap as much as possible. */
if( !(pdtBase->flags & OPAL_DATATYPE_FLAG_OVERLAP) ) {
if( ((disp + true_lb) >= pdtBase->true_ub) ||
((disp + true_ub) <= pdtBase->true_lb) ) {
} else {
/* potential overlap */
}
}
#endif
/* The lower bound should be inherited from the parent if and only
* if the USER has explicitly set it. The result lb is the MIN between
* the all lb + disp if and only if all or nobody flags's contain the LB.
*/
if( (pdtAdd->flags ^ pdtBase->flags) & OPAL_DATATYPE_FLAG_USER_LB ) {
if( pdtBase->flags & OPAL_DATATYPE_FLAG_USER_LB ) {
lb = pdtBase->lb; /* base type has a user provided lb */
}
pdtBase->flags |= OPAL_DATATYPE_FLAG_USER_LB;
} else {
/* both of them have the LB flag or both of them dont have it */
lb = LMIN( pdtBase->lb, lb );
}
/* the same apply for the upper bound except for the case where
* either of them has the flag UB, in which case we should
* compute the UB including the natural alignement of the data.
*/
if( (pdtBase->flags ^ pdtAdd->flags) & OPAL_DATATYPE_FLAG_USER_UB ) {
if( pdtBase->flags & OPAL_DATATYPE_FLAG_USER_UB ) {
ub = pdtBase->ub;
}
pdtBase->flags |= OPAL_DATATYPE_FLAG_USER_UB;
} else {
/* both of them have the UB flag or both of them dont have it */
/* we should compute the extent depending on the alignement */
ub = LMAX( pdtBase->ub, ub );
}
/* While the true_lb and true_ub have to be ordered to have the true_lb lower
* than the true_ub, the ub and lb do not have to be ordered. They should be
* as the user define them.
*/
pdtBase->lb = lb;
pdtBase->ub = ub;
/* compute the new memory alignement */
pdtBase->align = IMAX( pdtBase->align, pdtAdd->align );
/* Now that we have the new ub and the alignment we should update the ub to match
* the new alignement. We have to add an epsilon that is the least nonnegative
* increment needed to roung the extent to the next multiple of the alignment.
* This rule apply only if there is user specified upper bound as stated in the
* MPI standard MPI 1.2 page 71.
*/
if( !(pdtBase->flags & OPAL_DATATYPE_FLAG_USER_UB) ) {
epsilon = (pdtBase->ub - pdtBase->lb) % pdtBase->align;
if( 0 != epsilon ) {
pdtBase->ub += (pdtBase->align - epsilon);
}
}
/* now we know it contain some data */
pdtBase->flags |= OPAL_DATATYPE_FLAG_DATA;
/*
* the count == 0 is LEGAL only for MPI_UB and MPI_LB. Therefore we support it
* here in the upper part of this function. As an extension, the count set to
* zero can be used to reset the alignment of the data, but not for changing
* the true_lb and true_ub.
*/
if( (0 == count) || (0 == pdtAdd->size) ) {
return OPAL_SUCCESS;
}
/* Now, once we know everything is fine and there are some bytes in
* the data-type we can update the size, true_lb and true_ub.
*/
pdtBase->size += count * pdtAdd->size;
if( 0 == pdtBase->nbElems ) old_true_ub = disp;
else old_true_ub = pdtBase->true_ub;
if( 0 != pdtBase->size ) {
pdtBase->true_lb = LMIN( true_lb, pdtBase->true_lb );
pdtBase->true_ub = LMAX( true_ub, pdtBase->true_ub );
} else {
pdtBase->true_lb = true_lb;
pdtBase->true_ub = true_ub;
}
pdtBase->bdt_used |= pdtAdd->bdt_used;
newLength = pdtBase->desc.used + place_needed;
if( newLength > pdtBase->desc.length ) {
newLength = ((newLength / DT_INCREASE_STACK) + 1 ) * DT_INCREASE_STACK;
pdtBase->desc.desc = (dt_elem_desc_t*)realloc( pdtBase->desc.desc,
sizeof(dt_elem_desc_t) * newLength );
pdtBase->desc.length = newLength;
}
pLast = &(pdtBase->desc.desc[pdtBase->desc.used]);
/* The condition to be able to use the optimized path here is to be in presence
* of an predefined contiguous datatype. This part is unable to handle any
* predefined non contiguous datatypes (like MPI_SHORT_INT).
*/
if( (pdtAdd->flags & (OPAL_DATATYPE_FLAG_PREDEFINED | OPAL_DATATYPE_FLAG_DATA)) == (OPAL_DATATYPE_FLAG_PREDEFINED | OPAL_DATATYPE_FLAG_DATA) ) {
pdtBase->btypes[pdtAdd->id] += count;
if( (extent != (OPAL_PTRDIFF_TYPE)pdtAdd->size) && (count > 1) ) { /* gaps around the datatype */
localFlags = pdtAdd->flags & ~(OPAL_DATATYPE_FLAG_COMMITED | OPAL_DATATYPE_FLAG_CONTIGUOUS | OPAL_DATATYPE_FLAG_NO_GAPS);
CREATE_LOOP_START( pLast, count, 2, extent, localFlags );
pLast++;
pLast->elem.common.type = pdtAdd->id;
pLast->elem.count = 1;
pLast->elem.disp = disp;
pLast->elem.extent = pdtAdd->size;
pLast->elem.common.flags = localFlags | OPAL_DATATYPE_FLAG_CONTIGUOUS;
pLast++;
CREATE_LOOP_END( pLast, 2, disp, pdtAdd->size, localFlags );
pdtBase->desc.used += 3;
pdtBase->btypes[OPAL_DATATYPE_LOOP] = 1;
pdtBase->btypes[OPAL_DATATYPE_END_LOOP] = 1;
} else {
pLast->elem.common.type = pdtAdd->id;
pLast->elem.count = count;
pLast->elem.disp = disp;
pLast->elem.extent = extent;
pdtBase->desc.used++;
pLast->elem.common.flags = pdtAdd->flags & ~(OPAL_DATATYPE_FLAG_COMMITED);
}
} else {
/* keep trace of the total number of basic datatypes in the datatype definition */
pdtBase->btypes[OPAL_DATATYPE_LOOP] += pdtAdd->btypes[OPAL_DATATYPE_LOOP];
pdtBase->btypes[OPAL_DATATYPE_END_LOOP] += pdtAdd->btypes[OPAL_DATATYPE_END_LOOP];
pdtBase->btypes[OPAL_DATATYPE_LB] |= pdtAdd->btypes[OPAL_DATATYPE_LB];
pdtBase->btypes[OPAL_DATATYPE_UB] |= pdtAdd->btypes[OPAL_DATATYPE_UB];
for( i = 4; i < OPAL_DATATYPE_MAX_PREDEFINED; i++ )
if( pdtAdd->btypes[i] != 0 ) pdtBase->btypes[i] += (count * pdtAdd->btypes[i]);
if( (1 == pdtAdd->desc.used) && (extent == (pdtAdd->ub - pdtAdd->lb)) &&
(extent == pdtAdd->desc.desc[0].elem.extent) ) {
pLast->elem = pdtAdd->desc.desc[0].elem;
pLast->elem.count *= count;
pLast->elem.disp += disp;
pdtBase->desc.used++;
} else {
/* if the extent of the datatype is the same as the extent of the loop
* description of the datatype then we simply have to update the main loop.
*/
if( count != 1 ) {
pLoop = pLast;
CREATE_LOOP_START( pLast, count, pdtAdd->desc.used + 1, extent,
(pdtAdd->flags & ~(OPAL_DATATYPE_FLAG_COMMITED)) );
pdtBase->btypes[OPAL_DATATYPE_LOOP] += 2;
pdtBase->desc.used += 2;
pLast++;
}
for( i = 0; i < pdtAdd->desc.used; i++ ) {
pLast->elem = pdtAdd->desc.desc[i].elem;
if( OPAL_DATATYPE_FLAG_DATA & pLast->elem.common.flags )
pLast->elem.disp += disp;
else if( OPAL_DATATYPE_END_LOOP == pLast->elem.common.type ) {
pLast->end_loop.first_elem_disp += disp;
}
pLast++;
}
pdtBase->desc.used += pdtAdd->desc.used;
if( pLoop != NULL ) {
int index = GET_FIRST_NON_LOOP( pLoop );
assert( pLoop[index].elem.common.flags & OPAL_DATATYPE_FLAG_DATA );
CREATE_LOOP_END( pLast, pdtAdd->desc.used + 1, pLoop[index].elem.disp,
pdtAdd->size, pLoop->loop.common.flags );
}
}
/* should I add some space until the extent of this datatype ? */
}
/* Is the data still contiguous ?
* The only way for the data to be contiguous is to have the true extent
* equal to his size. In other words to avoid having internal gaps between
* elements. If any of the data are overlapping then this method will not work.
*/
localFlags = pdtBase->flags & pdtAdd->flags;
UNSET_CONTIGUOUS_FLAG(pdtBase->flags);
if( (localFlags & OPAL_DATATYPE_FLAG_CONTIGUOUS) /* both type were contiguous */
&& ((disp + pdtAdd->true_lb) == old_true_ub) /* and there is no gap between them */
&& ( ((OPAL_PTRDIFF_TYPE)pdtAdd->size == extent) /* the size and the extent of the
* added type have to match */
|| (count < 2)) ) { /* if the count is bigger than 2 */
SET_CONTIGUOUS_FLAG(pdtBase->flags);
if( (OPAL_PTRDIFF_TYPE)pdtBase->size == (pdtBase->ub - pdtBase->lb) )
SET_NO_GAP_FLAG(pdtBase->flags);
}
/* If the NO_GAP flag is set the contiguous have to be set too */
if( pdtBase->flags & OPAL_DATATYPE_FLAG_NO_GAPS ) {
assert( pdtBase->flags & OPAL_DATATYPE_FLAG_CONTIGUOUS );
}
pdtBase->nbElems += (count * pdtAdd->nbElems);
return OPAL_SUCCESS;
}
/* we have 3 differents structures to update:
* the first is the real representation of the datatype
* the second is the internal representation using extents
* the last is the representation used for send operations
* If the count is ZERO we dont have to add the pdtAdd datatype. But we have to
* be sure that the pdtBase datatype is correctly initialized with all fields
* set to ZERO if it's a empty datatype.
*/
int32_t ompi_ddt_add( ompi_datatype_t* pdtBase, const ompi_datatype_t* pdtAdd,
uint32_t count, ptrdiff_t disp, ptrdiff_t extent )
{
uint32_t newLength, place_needed = 0, i;
short localFlags = 0; /* no specific options yet */
dt_elem_desc_t *pLast, *pLoop = NULL;
ptrdiff_t lb, ub, true_lb, true_ub, epsilon, old_true_ub;
/* the extent should always be positive. So a negative
* value here have a special meaning ie. default extent as
* computed by ub - lb
*/
if( extent == -1 ) extent = (pdtAdd->ub - pdtAdd->lb);
if( pdtAdd->flags & DT_FLAG_PREDEFINED ) { /* add a basic datatype */
/* handle special cases for DT_LB and DT_UB */
if( pdtAdd == ompi_ddt_basicDatatypes[DT_LB] ) {
pdtBase->bdt_used |= (((uint64_t)1) << DT_LB);
if( pdtBase->flags & DT_FLAG_USER_LB ) {
pdtBase->lb = LMIN( pdtBase->lb, disp );
} else {
pdtBase->lb = disp;
pdtBase->flags |= DT_FLAG_USER_LB;
}
if( (pdtBase->ub - pdtBase->lb) != (ptrdiff_t)pdtBase->size ) {
pdtBase->flags &= ~DT_FLAG_NO_GAPS;
}
return OMPI_SUCCESS;
} else if( pdtAdd == ompi_ddt_basicDatatypes[DT_UB] ) {
pdtBase->bdt_used |= (((uint64_t)1) << DT_UB);
if( pdtBase->flags & DT_FLAG_USER_UB ) {
pdtBase->ub = LMAX( pdtBase->ub, disp );
} else {
pdtBase->ub = disp;
pdtBase->flags |= DT_FLAG_USER_UB;
}
if( (pdtBase->ub - pdtBase->lb) != (ptrdiff_t)pdtBase->size ) {
pdtBase->flags &= ~DT_FLAG_NO_GAPS;
}
return OMPI_SUCCESS;
}
place_needed = (extent == (ptrdiff_t)pdtAdd->size ? 1 : 3);
} else {
place_needed = pdtAdd->desc.used;
if( count != 1 ) place_needed += 2; /* for the loop markers */
}
/*
* Compute the lower and upper bound of the datatype. We do it in 2 steps.
* First compute the lb and ub of the new datatype taking in account the
* count. Then update the lb value depending on the user markers and
* update the global lb and ub.
*/
OMPI_DDT_LB_UB_CONT( count, disp, pdtAdd->lb, pdtAdd->ub, extent, lb, ub );
/* The true_lb and true_ub take in account the gaps at the begining and the
* end of the datatype independing on the number of repetitions of the datatype.
*/
true_lb = lb - (pdtAdd->lb - pdtAdd->true_lb);
true_ub = ub - (pdtAdd->ub - pdtAdd->true_ub);
if( true_lb > true_ub ) {
old_true_ub = true_lb;
true_lb = true_ub;
true_ub = old_true_ub;
}
/* the lower bound should be inherited from the parent if and only
* if the USER has explicitly set it. The result lb is the MIN between
* the all lb + disp if and only if all or nobody flags's contain the LB.
*/
if( (pdtAdd->flags ^ pdtBase->flags) & DT_FLAG_USER_LB ) {
if( pdtBase->flags & DT_FLAG_USER_LB ) {
lb = pdtBase->lb; /* base type has a user provided lb */
}
pdtBase->flags |= DT_FLAG_USER_LB;
} else {
/* both of them have the LB flag or both of them dont have it */
lb = LMIN( pdtBase->lb, lb );
}
/* the same apply for the upper bound except for the case where
* either of them has the flag UB, in which case we should
* compute the UB including the natural alignement of the data.
*/
if( (pdtBase->flags ^ pdtAdd->flags) & DT_FLAG_USER_UB ) {
if( pdtBase->flags & DT_FLAG_USER_UB ) {
ub = pdtBase->ub;
}
pdtBase->flags |= DT_FLAG_USER_UB;
} else {
/* both of them have the UB flag or both of them dont have it */
/* we should compute the extent depending on the alignement */
ub = LMAX( pdtBase->ub, ub );
}
/* While the true_lb and true_ub have to be ordered to have the true_lb lower
* than the true_ub, the ub and lb does not have to be ordered. They should be
* as the user define them.
*/
pdtBase->lb = lb;
pdtBase->ub = ub;
if( 0 == pdtBase->nbElems ) old_true_ub = disp;
else old_true_ub = pdtBase->true_ub;
pdtBase->true_lb = LMIN( true_lb, pdtBase->true_lb );
pdtBase->true_ub = LMAX( true_ub, pdtBase->true_ub );
/* compute the new memory alignement */
pdtBase->align = IMAX( pdtBase->align, pdtAdd->align );
pdtBase->size += count * pdtAdd->size;
/* Now that we have the new ub and the alignment we should update the ub to match
* the new alignement. We have to add an epsilon that is the least nonnegative increment
* needed to roung the extent to the next multiple of the alignment. This rule
* apply only if there is user specified upper bound as stated in the MPI
* standard MPI 1.2 page 71.
*/
if( !(pdtBase->flags & DT_FLAG_USER_UB) ) {
epsilon = (pdtBase->ub - pdtBase->lb) % pdtBase->align;
if( 0 != epsilon ) {
pdtBase->ub += (pdtBase->align - epsilon);
}
}
/*
* the count == 0 is LEGAL only for MPI_UB and MPI_LB. I accept it just as a nice way to set
* the soft UB for a data (without using a real UB marker). This approach can be used to
* create the subarray and darray datatype. However from the MPI level this function
* should never be called directly with a count set to 0.
* Adding a data-type with a size zero is legal but does not have to go through all the
* stuff below.
*/
if( (0 == count) || (0 == pdtAdd->size) ) {
return OMPI_SUCCESS;
}
pdtBase->bdt_used |= pdtAdd->bdt_used;
newLength = pdtBase->desc.used + place_needed;
if( newLength > pdtBase->desc.length ) {
newLength = ((newLength / DT_INCREASE_STACK) + 1 ) * DT_INCREASE_STACK;
pdtBase->desc.desc = (dt_elem_desc_t*)realloc( pdtBase->desc.desc,
sizeof(dt_elem_desc_t) * newLength );
pdtBase->desc.length = newLength;
}
pLast = &(pdtBase->desc.desc[pdtBase->desc.used]);
/* The condition to be able to use the optimized path here is to be in presence
* of an predefined contiguous datatype. This part is unable to handle any
* predefined non contiguous datatypes (like MPI_SHORT_INT).
*/
if( (pdtAdd->flags & (DT_FLAG_PREDEFINED | DT_FLAG_DATA)) == (DT_FLAG_PREDEFINED | DT_FLAG_DATA) ) {
pdtBase->btypes[pdtAdd->id] += count;
if( (extent != (ptrdiff_t)pdtAdd->size) && (count > 1) ) { /* gaps around the datatype */
localFlags = pdtAdd->flags & ~(DT_FLAG_COMMITED | DT_FLAG_CONTIGUOUS | DT_FLAG_NO_GAPS);
CREATE_LOOP_START( pLast, count, 2, extent, localFlags );
pLast++;
pLast->elem.common.type = pdtAdd->id;
pLast->elem.count = 1;
pLast->elem.disp = disp;
pLast->elem.extent = pdtAdd->size;
pLast->elem.common.flags = localFlags | DT_FLAG_CONTIGUOUS;
pLast++;
CREATE_LOOP_END( pLast, 2, disp, pdtAdd->size, localFlags );
pdtBase->desc.used += 3;
pdtBase->btypes[DT_LOOP] = 1;
pdtBase->btypes[DT_END_LOOP] = 1;
} else {
pLast->elem.common.type = pdtAdd->id;
pLast->elem.count = count;
pLast->elem.disp = disp;
pLast->elem.extent = extent;
pdtBase->desc.used++;
pLast->elem.common.flags = pdtAdd->flags & ~(DT_FLAG_COMMITED);
}
} else {
/* keep trace of the total number of basic datatypes in the datatype definition */
pdtBase->btypes[DT_LOOP] += pdtAdd->btypes[DT_LOOP];
pdtBase->btypes[DT_END_LOOP] += pdtAdd->btypes[DT_END_LOOP];
pdtBase->btypes[DT_LB] |= pdtAdd->btypes[DT_LB];
pdtBase->btypes[DT_UB] |= pdtAdd->btypes[DT_UB];
for( i = 4; i < DT_MAX_PREDEFINED; i++ )
if( pdtAdd->btypes[i] != 0 ) pdtBase->btypes[i] += (count * pdtAdd->btypes[i]);
if( (1 == pdtAdd->desc.used) && (extent == (pdtAdd->ub - pdtAdd->lb)) &&
(extent == pdtAdd->desc.desc[0].elem.extent) ){
pLast->elem = pdtAdd->desc.desc[0].elem;
pLast->elem.count *= count;
pLast->elem.disp += disp;
pdtBase->desc.used++;
} else {
/* if the extent of the datatype is the same as the extent of the loop
* description of the datatype then we simply have to update the main loop.
*/
if( count != 1 ) {
pLoop = pLast;
CREATE_LOOP_START( pLast, count, pdtAdd->desc.used + 1, extent,
(pdtAdd->flags & ~(DT_FLAG_COMMITED)) );
pdtBase->btypes[DT_LOOP] += 2;
pdtBase->desc.used += 2;
pLast++;
}
for( i = 0; i < pdtAdd->desc.used; i++ ) {
pLast->elem = pdtAdd->desc.desc[i].elem;
if( DT_FLAG_DATA & pLast->elem.common.flags )
pLast->elem.disp += disp;
else if( DT_END_LOOP == pLast->elem.common.type ) {
pLast->end_loop.first_elem_disp += disp;
}
pLast++;
}
pdtBase->desc.used += pdtAdd->desc.used;
if( pLoop != NULL ) {
int index = GET_FIRST_NON_LOOP( pLoop );
assert( pLoop[index].elem.common.flags & DT_FLAG_DATA );
CREATE_LOOP_END( pLast, pdtAdd->desc.used + 1, pLoop[index].elem.disp,
pdtAdd->size, pLoop->loop.common.flags );
}
}
/* should I add some space until the extent of this datatype ? */
}
/* Is the data still contiguous ?
* The only way for the data to be contiguous is to have the true extent
* equal to his size. In other words to avoid having internal gaps between
* elements. If any of the data are overlapping then this method will not work.
*/
localFlags = pdtBase->flags & pdtAdd->flags;
UNSET_CONTIGUOUS_FLAG(pdtBase->flags);
if( disp != old_true_ub ) { /* is there a gap between the 2 datatypes ? */
if( disp < old_true_ub ) pdtBase->flags |= DT_FLAG_OVERLAP;
} else {
if( (localFlags & DT_FLAG_CONTIGUOUS) /* both have to be contiguous */
&& ( ((ptrdiff_t)pdtAdd->size == extent) /* the size and the extent of the
* added type have to match */
|| (count < 2)) ) { /* if the count is bigger than 2 */
SET_CONTIGUOUS_FLAG(pdtBase->flags);
if( (ptrdiff_t)pdtBase->size == (pdtBase->ub - pdtBase->lb) )
SET_NO_GAP_FLAG(pdtBase->flags);
}
}
/* If the NO_GAP flag is set the contiguous have to be set too */
if( pdtBase->flags & DT_FLAG_NO_GAPS ) {
assert( pdtBase->flags & DT_FLAG_CONTIGUOUS );
}
pdtBase->nbElems += (count * pdtAdd->nbElems);
return OMPI_SUCCESS;
}
