unsigned char ReadUART(){
if(UartUnreadCount()!=0){
received++;
return UartReadChar();
}else{
return MIDI_NULL; //equivalent no NULL
}
}
/******************************************************************************
* @brief Sets measurement range.
*
* @param None.
*
* @return None.
******************************************************************************/
void ADXL362_SetRange(void)
{
char rx = 0;
char rxReg = 0;
xil_printf("\n\r>Select measurement range: \n\r");
xil_printf(" [1] +/- 2g\n\r");
xil_printf(" [2] +/- 4g\n\r");
xil_printf(" [3] +/- 8g\n\r");
xil_printf("Press [1] to [3] to select desired range\n\r");
DisableInterrupts(UART_INTERRUPT);
// Check if data is available on the UART
rx = UartReadChar();
rxReg = (ADXL362_ReadReg(ADXL362_FILTER_CTL) & 0x3F);
switch(rx)
{
case '1':
rxReg = 0x00 | rxReg;
xil_printf("> +/- 2g measurement range selected\n\r");
break;
case '2':
rxReg = 0x40 | rxReg;
xil_printf("> +/- 4g measurement range selected\n\r");
break;
case '3':
rxReg = 0x80 | rxReg;
xil_printf("> +/- 8g measurement range selected\n\r");
break;
default:
xil_printf("> wrong measurement range\n\r");
break;
}
ADXL362_WriteReg(ADXL362_FILTER_CTL, rxReg);
EnableInterrupts(UART_INTERRUPT);
rxData = 0;
xil_printf("\n\r");
ADXL362_DisplayMenu();
}
/******************************************************************************
* @brief Runs Programmable Ramp Generation Mode Main Menu.
*
* @param None.
*
* @return None.
******************************************************************************/
void AD5628_ProgRamp(void)
{
DisableInterrupts(UART_INTERRUPT);
AD5628_DisplayProgRampMenu();
// Check if data is available on the UART
rxData = UartReadChar();
switch(rxData)
{
case 't':
AD5628_EnterTimeStep();
break;
case 'i':
AD5628_EnterIncrStep();
break;
case 'd':
AD5628_RampDacSel();
break;
case 'r':
AD5628_RunProgRamp();
break;
case 'q':
xil_printf("\n\r>Returning to Menu...\n\r");
rxData = 'm';
break;
default:
xil_printf("\n\rWrong option!");
rxData = 0;
break;
}
if(rxData != 'm')
{
rxData = 'p';
}
EnableInterrupts(UART_INTERRUPT);
}
/******************************************************************************
* @brief Runs Programmable Ramp Generation Mode DAC Selection Menu.
*
* @param None.
*
* @return None.
******************************************************************************/
void AD5628_RampDacSel(void)
{
char rx = 0x00;
do
{
AD5628_DisplayDacMenu();
// Check if data is available on UART
rx = UartReadChar();
if(rx != 'q')
{
if(rx == '9')
{
dacSelected = 0x0F;
}
else
{
dacSelected = (rx - 0x31);
}
switch(dacSelected)
{
case 0:
xil_printf("\n\r>You have chosen to update ");
xil_printf("DAC A.\n\r");
break;
case 1:
xil_printf("\n\r>You have chosen to update ");
xil_printf("DAC B.\n\r");
break;
case 2:
xil_printf("\n\r>You have chosen to update ");
xil_printf("DAC C.\n\r");
break;
case 3:
xil_printf("\n\r>You have chosen to update ");
xil_printf("DAC D.\n\r");
break;
case 4:
xil_printf("\n\r>You have chosen to update ");
xil_printf("DAC E.\n\r");
break;
case 5:
xil_printf("\n\r>You have chosen to update ");
xil_printf("DAC F.\n\r");
break;
case 6:
xil_printf("\n\r>You have chosen to update ");
xil_printf("DAC G.\n\r");
break;
case 7:
xil_printf("\n\r>You have chosen to update ");
xil_printf("DAC H.\n\r");
break;
case 15:
xil_printf("\n\r>You have chosen to update ");
xil_printf("All DACs.\n\r");
break;
default:
xil_printf("\n\rWrong option!\n\r");
break;
}
}
}
while (!(((dacSelected >=0) && (dacSelected <=7)) || (dacSelected == 15)));
}
/******************************************************************************
* @brief Enters Increment Step Value Set Mode.
*
* @param None.
*
* @return None.
******************************************************************************/
void AD5628_EnterIncrStep(void)
{
char rx = 0;
char c[3] = "000";
char *c_ptr;
int i = 0;
char cnt = 0;
char valid = 0;
int value = 0;
// Disable interrupts in order to use normal polling
DisableInterrupts(UART_INTERRUPT);
xil_printf("\n\rPlease enter a value between 0x000 and 0xFFF: 0x");
c_ptr = c;
// Maximum number of received characters will be 5 (e.g. 5 0 F 0x0D 0x0A)
while(i < 5)
{
// Check if data is available on UART
rx = UartReadChar();
xil_printf("%c", rx);
// Check if pressed key is [Enter]
if(rx == 0x0D)
{
i = 4;
}
else if(rx == 0x0A)
{
i = 4;
}
else if(((rx > 0x00)&&(rx < 0x30))|| // Not 0 - 9
((rx > 0x39)&&(rx < 0x41))|| // Not A - F
((rx > 0x46)&&(rx < 0x61))|| // Not a - f
(rx > 0x66))
{
xil_printf("\n\rCharacters entered must be HEX values (0 to 9 and A B C D E F)");
i = 5;
valid = 0;
}
else
{
*c_ptr ++= rx;
cnt++;
valid = 1;
}
if(cnt == 3)
{
i = 5;
}
i++;
}
xil_printf("\n\r");
// Translate from ASCII to dec
for(i = 0; i < cnt; i++)
{
if(c[i] > 0x60)
{
value = value * 16 + (c[i] - 0x57);
}
else if(c[i] > 0x39)
{
value = value * 16 + (c[i] - 0x37);
}
else
{
value = value * 16 + (c[i] - 0x30);
}
}
if(valid == 1)
{
dacStepValue = value;
xil_printf(">Incremented size modified to 0x%x", dacStepValue);
xil_printf("\n\r");
}
rxData ='p';
}
/******************************************************************************
* @brief Enters Time Step Value Set Mode.
*
* @param None.
*
* @return None.
******************************************************************************/
void AD5628_EnterTimeStep(void)
{
char rx = 0;
char c[4] = "0000";
char *c_ptr;
int i = 0;
char cnt = 0;
char valid = 0;
int value = 0;
int topValue = 4294967295;
// Disable interrupts in order to use normal polling
DisableInterrupts(UART_INTERRUPT);
while(valid == 0)
{
c_ptr = c;
i = 0;
cnt = 0;
value = 0;
xil_printf("\n\rPlease enter a value between 100 and 5000 [ms]: ");
// Maximum number of received characters will be 6 (e.g. 5 0 0 0 0x0D 0x0A)
while(i < 6)
{
// Check if data is available on UART
rx = UartReadChar();
xil_printf("%c", rx);
// Check if pressed key is [Enter]
if(rx == 0x0D)
{
i = 5;
}
else if(rx == 0x0A)
{
i = 5;
}
else if(((rx > 0x00)&&(rx < 0x30))||(rx > 0x39))
{
xil_printf("\n\rCharacters must be digits [0] to [9]\n\r");
i = 6;
valid = 0;
}
else
{
*c_ptr ++= rx;
cnt++;
valid = 1;
}
if(cnt == 4)
{
i = 6;
}
i++;
}
xil_printf("\n\r");
// Translate from ASCII to dec
for(i = 0; i < cnt; i++)
{
value = value * 10 + (c[i] - 0x30);
}
if((value > 5000)||(value < 100))
{
xil_printf("\n\r> Incorrect value entered. Value must be between 100 and 5000.\n\r");
valid = 0;
}
}
if(valid == 1)
{
if(USE_PS7 == 1){
timeStepValue = ((float)6781 / 1000) * value + 1;
}
else{
timeStepValue = (topValue - (value * 100000)) + 2;
}
}
rxData ='p';
}
/******************************************************************************
* @brief Waveform Generation Mode.
*
* @param None.
*
* @return None.
******************************************************************************/
void AD5628_WaveGen(void)
{
int prevRxData = 0;
int i = 0;
char valid = 1;
char rx = 's';
char dacSel = 0;
int repeat = 1;
//AD5628_DisplayWaveMenu();
rxData = 's';
xil_printf("\n\r>Waveform Generation Mode Selected\n\r");
while(valid)
{
repeat = 1;
switch(rxData)
{
case '1':
AD5628_WriteUpdateDac(dacSel, (squaretable[i] << 4));
i+=1;
break;
case '2':
AD5628_WriteUpdateDac(dacSel, (triangletable[i] << 4));
i+=1;
break;
case '3':
AD5628_WriteUpdateDac(dacSel, (sawtable[i] << 4));
i+=1;
break;
case '4':
AD5628_WriteUpdateDac(dacSel, (sinetable[i] << 4));
i+=1;
break;
case 's':
break;
case 'q':
xil_printf("\n\r>Returning to Menu...\n\r");
valid = 0;
rxData = 'm';
break;
case 'm':
break;
default:
break;
}
if(rxData != prevRxData)
{
prevRxData = rxData;
switch(rxData)
{
case '1':
xil_printf("\n\r>Square waveform selected\n\r");
break;
case '2':
xil_printf("\n\r>Triangle waveform selected\n\r");
break;
case '3':
xil_printf("\n\r>Sawtooth waveform selected\n\r");
break;
case '4':
xil_printf("\n\r>Sine waveform selected\n\r");
break;
case 's':
while (repeat == 1)
{
AD5628_DisplayDacMenu();
DisableInterrupts(UART_INTERRUPT);
// Check if data is available on UART
rx = UartReadChar();
if(rx != 'q')
{
if(rx == '9')
{
dacSel = 0x0F;
}
else
{
dacSel = (rx - 0x31);
}
repeat = 0;
switch(dacSel)
{
case 0:
xil_printf("\n\r>You have chosen to update ");
xil_printf("DAC A.\n\r");
break;
case 1:
xil_printf("\n\r>You have chosen to update ");
xil_printf("DAC B.\n\r");
break;
case 2:
xil_printf("\n\r>You have chosen to update ");
xil_printf("DAC C.\n\r");
break;
case 3:
xil_printf("\n\r>You have chosen to update ");
xil_printf("DAC D.\n\r");
break;
case 4:
xil_printf("\n\r>You have chosen to update ");
xil_printf("DAC E.\n\r");
break;
case 5:
xil_printf("\n\r>You have chosen to update ");
xil_printf("DAC F.\n\r");
break;
case 6:
xil_printf("\n\r>You have chosen to update ");
xil_printf("DAC G.\n\r");
break;
case 7:
xil_printf("\n\r>You have chosen to update ");
xil_printf("DAC H.\n\r");
break;
case 15:
xil_printf("\n\r>You have chosen to update ");
xil_printf("All DACs.\n\r");
break;
default:
xil_printf("Wrong option!\n\r");
//xil_printf("\n\r>Returning to DAC Selection...\n\r");
repeat = 1;
break;
}
}
else
{
valid = 0;
}
if ( (((dacSel >= 0) && (dacSel <= 7)) || (dacSel == 15)) && (valid != 0) )
{
AD5628_DisplayWaveMenu();
xil_printf("Press [1] to [4] in order to select the desired output, or [q] to exit\n\r");
}
EnableInterrupts(UART_INTERRUPT);
}
break;
case 'q':
xil_printf("\n\r>Returning to Menu...\n\r");
valid = 0;
rxData = 'm';
break;
default:
if (valid != 0)
{
xil_printf("Wrong option!\n\r");
AD5628_DisplayWaveMenu();
xil_printf("Press [1] to [4] in order to select the desired output, or [q] to exit\n\r");
}
break;
}
}
if(i > 255)
{
i = 0;
}
}
}
/******************************************************************************
* @brief Fixed Value Mode.
*
* @param None.
*
* @return None.
******************************************************************************/
void AD5628_FixedValue(void)
{
char rx = 's';
char c[3] = "000";
char *c_ptr;
int i = 0;
char cnt = 0;
char valid = 0;
char dacSel = 0;
int value = 0;
// Disable interrupts in order to use normal polling
DisableInterrupts(UART_INTERRUPT);
AD5628_DisplayFixedMenu();
while(rx != 'q')
{
cnt = 0;
i = 0;
valid = 0;
value = 0;
c_ptr = c;
if(rx == 's')
{
xil_printf("\n\r");
AD5628_DisplayDacMenu();
// Check if data is available on UART
rx = UartReadChar();
if(rx != 'q')
{
if(rx == '9')
{
dacSel = 0x0F;
}
else
{
dacSel = (rx - 0x31);
}
switch(dacSel)
{
case 0:
xil_printf("\n\r>You have chosen to update ");
xil_printf("DAC A.\n\r");
break;
case 1:
xil_printf("\n\r>You have chosen to update ");
xil_printf("DAC B.\n\r");
break;
case 2:
xil_printf("\n\r>You have chosen to update ");
xil_printf("DAC C.\n\r");
break;
case 3:
xil_printf("\n\r>You have chosen to update ");
xil_printf("DAC D.\n\r");
break;
case 4:
xil_printf("\n\r>You have chosen to update ");
xil_printf("DAC E.\n\r");
break;
case 5:
xil_printf("\n\r>You have chosen to update ");
xil_printf("DAC F.\n\r");
break;
case 6:
xil_printf("\n\r>You have chosen to update ");
xil_printf("DAC G.\n\r");
break;
case 7:
xil_printf("\n\r>You have chosen to update ");
xil_printf("DAC H.\n\r");
break;
case 15:
xil_printf("\n\r>You have chosen to update ");
xil_printf("All DACs.\n\r");
break;
case ('s'-0x31):
i=5;
valid = 0;
break;
default:
xil_printf("Wrong option!");
rx = 's';
i=5;
valid = 0;
break;
}
}
else
{
i = 5;
valid = 0;
}
}
if(i == 0)
{
xil_printf("\n\rPlease enter a value between 0x000 and 0xFFF: 0x");
}
// Maximum number of received characters will be 5 (e.g. F F F 0x0D 0x0A)
while(i < 5)
{
// Check if data is available on UART
rx = UartReadChar();
xil_printf("%c", rx);
// Check if pressed key is [Enter]
if(rx == 0x0D)
{
i = 4;
}
else if(rx == 0x0A)
{
i = 4;
}
else if(rx == 'q')
{
i = 5;
valid = 0;
}
else if(rx == 's')
{
i = 5;
valid = 0;
}
else if(((rx > 0x00)&&(rx < 0x30))|| // Not 0 - 9
((rx > 0x39)&&(rx < 0x41))|| // Not A - F
((rx > 0x46)&&(rx < 0x61))|| // Not a - f
(rx > 0x66))
{
xil_printf("\n\rCharacters entered must be HEX values (0 to 9 and A B C D E F)");
i = 5;
valid = 0;
}
else
{
*c_ptr++ = rx;
cnt = cnt + 1;
valid = 1;
}
if(cnt == 3)
{
i = 5;
}
i++;
}
// Translate from ASCII to hex
for(i = 0; i < cnt; i++)
{
if(c[i] > 0x60)
{
value = value * 16 + (c[i] - 0x57);
}
else if(c[i] > 0x39)
{
value = value * 16 + (c[i] - 0x37);
}
else
{
value = value * 16 + (c[i] - 0x30);
}
}
if(valid == 1)
{
AD5628_WriteUpdateDac(dacSel, value);
xil_printf("\n\r>DAC Output modified\n\r");
}
}
rxData = 'm';
// Enable interrupts
EnableInterrupts(UART_INTERRUPT);
xil_printf("\n\r\n\r>Returning to Menu\n\r");
}
