Example #1
0
int GSkipBaseDevice::OSClearMeasurementPacketQueue()
{
    int nReturn = 0;

    if (LockDevice(1) && IsOKToUse())
    {
        nReturn = local_ClearPacketQueue(this, kMeasurementPipe);
        UnlockDevice();
    }
    else
        GSTD_ASSERT(0);

    return nReturn;
}
Example #2
0
int GSkipBaseDevice::OSClearCmdRespPacketQueue()
{
    int nReturn = 0;

    if (LockDevice(1) && IsOKToUse())
    {
        nReturn = local_ClearPacketQueue(this, kCommandPipe);
        UnlockDevice();
    }
    else
        GSTD_ASSERT(0);

    return nReturn;
}
Example #3
0
int GSkipBaseDevice::OSReadCmdRespPackets(void * pBuffer, int * pIONumPackets, int nBufferSizeInPackets)
{
    int nReturn = 0;

    if (LockDevice(1) && IsOKToUse())
    {
        nReturn = local_ReadPackets(this, pBuffer, pIONumPackets, nBufferSizeInPackets, kCommandPipe);
        UnlockDevice();
    }
    else
        GSTD_ASSERT(0);

    return nReturn;
}
Example #4
0
int GSkipBaseDevice::OSCmdRespPacketsAvailable(void)
{
    int nReturn = 0;

    if (LockDevice(1) && IsOKToUse())
    {
        nReturn = local_PacketsAvailable(this, kCommandPipe);
        UnlockDevice();
    }
    else
        GSTD_ASSERT(0);

    return nReturn;
}
Example #5
0
int GSkipBaseDevice::OSClose(void)
{
    if (LockDevice(1) && IsOKToUse())
    {
        TUSBBulkDevice usbDevice = static_cast<TUSBBulkDevice>(GetOSData());
        if ((usbDevice != NULL) && IsOpen())
            VST_CloseUSBPort((VST_USBBulkDevice *)usbDevice);
        UnlockDevice();
    }
    else
        GSTD_ASSERT(0);

    return kResponse_OK;
}
Example #6
0
void GSkipBaseDevice::OSDestroy(void)
{
    if (LockDevice(1) && IsOKToUse())
    {
        TUSBBulkDevice usbDevice = static_cast<TUSBBulkDevice>(GetOSData());
        if (usbDevice != NULL)
        {
            VST_CloseUSBPort((VST_USBBulkDevice *)usbDevice);
            VST_ReleaseUSBBulkDevice((VST_USBBulkDevice *)usbDevice);
        }
        UnlockDevice();
    }
    else
        GSTD_ASSERT(0);
}
Example #7
0
int GSkipBaseDevice::OSMeasurementPacketsAvailable(unsigned char *pNumMeasurementsInLastPacket)
{
    int nReturn = 0;

    if (LockDevice(1) && IsOKToUse())
    {
        nReturn = local_PacketsAvailable(this, kMeasurementPipe);
        if (pNumMeasurementsInLastPacket != NULL)
            *pNumMeasurementsInLastPacket = local_NumLastMeasurements(this);
        UnlockDevice();
    }
    else
        GSTD_ASSERT(0);

    return nReturn;
}
Example #8
0
int GSkipBaseDevice::OSClearIO(void)
{
    int nResult = kResponse_Error;

    if (LockDevice(1) && IsOKToUse())
    {
        nResult = OSClearMeasurementPacketQueue();
        if (nResult != kResponse_Error)
            nResult = GSkipBaseDevice::OSClearCmdRespPacketQueue();
        UnlockDevice();
    }
    else
        GSTD_ASSERT(0);

    return nResult;
}
static void stream_buffer_attr_callback(pa_stream *stream, void *pdata) //{{{
{
    ALCdevice *Device = pdata;
    pulse_data *data = Device->ExtraData;

    LockDevice(Device);

    data->attr = *(pa_stream_get_buffer_attr(stream));
    Device->UpdateSize = data->attr.minreq / data->frame_size;
    Device->NumUpdates = (data->attr.tlength/data->frame_size) / Device->UpdateSize;
    if(Device->NumUpdates <= 1)
    {
        Device->NumUpdates = 1;
        ERR("PulseAudio returned minreq > tlength/2; expect lag or break up\n");
    }

    UnlockDevice(Device);
}//}}}
Example #10
0
int GSkipBaseDevice::OSOpen(GPortRef * /*pPortRef*/)
{
    int nResult = kResponse_Error;

    if (LockDevice(1) && IsOKToUse())
    {
        TUSBBulkDevice usbDevice = static_cast<TUSBBulkDevice>(GetOSData());

        // port may be NULL if initialization failed
        if (usbDevice == NULL)
            return kResponse_Error;

        int err = VST_OpenUSBPortForIO((VST_USBBulkDevice *)usbDevice);
        if (err == (int)kCFM_IOExclusiveAccess)
        {
            // If another app (including Classic) has the device we
            // can simply retry a few times.  The driver should be able to get a lock
            // on the device at some point.
            int nTry = 0;
            while ((err == (int)kCFM_IOExclusiveAccess) && (nTry < 4))
            {
                err = VST_OpenUSBPortForIO((VST_USBBulkDevice *)usbDevice);
                nTry++;
            }
        }

        if (err == 0)
            nResult = kResponse_OK;
        else
        {
            cppsstream ssErr;
            ssErr << "GUSBDirectTempDevice:OSOpen -- Error: " << err;
            GSTD_LOG(ssErr.str());
        }

        UnlockDevice();
    }
    else
        GSTD_ASSERT(0);

    return nResult;
}
Example #11
0
int GSkipBaseDevice::OSWriteCmdPackets(void * pBuffer, int nNumPackets)
{
    int nResult = kResponse_Error;
    UInt32 nIONumBytes = nNumPackets * sizeof(GSkipPacket);

    if (LockDevice(1) && IsOKToUse())
    {
        TUSBBulkDevice usbDevice = static_cast<TUSBBulkDevice>(GetOSData());
        if (usbDevice != NULL)
        {
            int err = VST_WriteBytes((VST_USBBulkDevice *)usbDevice, pBuffer, nIONumBytes);
            if (err == 0)
                nResult = kResponse_OK;
        }
        UnlockDevice();
    }
    else
        GSTD_ASSERT(0);

    return nResult;
}
long GSkipDevice::SendInitCmdAndGetResponse(
	void *pParams,		//[in] ptr to cmd specific parameter block, may be NULL.
	long nParamBytes,	//[in] # of bytes in (*pParams).
	void *pRespBuf,		//[out] ptr to destination buffer, may be NULL.
	long *pnRespBytes,  //[in, out] size of of dest buffer on input, size of response on output, may be NULL if pRespBuf is NULL.
	long nTimeoutMs /* = 1000 */,//[in] # of milliseconds to wait before giving up.
	bool *pExitFlag /* = NULL */)//[in] ptr to flag that another thread can set to force early exit. 
						//		THIS FLAG MUST BE FALSE FOR THIS ROUTINE TO RUN.
						//		Ignore this if NULL.
{
	long nResult = kResponse_Error;
	unsigned char initStatus;
	long initStatusLength = sizeof(initStatus);

	if (LockDevice(1) && IsOKToUse())
	{
		nResult = kResponse_OK; 
		long maxNumRetries = (nTimeoutMs + SKIP_TIMEOUT_MS_CMD_ID_INIT_WITH_BUSY_STATUS - 1)/SKIP_TIMEOUT_MS_CMD_ID_INIT_WITH_BUSY_STATUS;
		if (maxNumRetries > 1)
			nTimeoutMs = SKIP_TIMEOUT_MS_CMD_ID_INIT_WITH_BUSY_STATUS;
		bool bSuccess = false;
		long numRetries;
		GSkipInitParams initParams;
		initParams.reportErrorWhilePoweringUpFlag = 1;
		if (pParams)
			GSTD_ASSERT(nParamBytes == sizeof(initParams));
		else
		{
			pParams = &initParams;
			nParamBytes = sizeof(initParams);
		}

		//Send multiple init commands until the timeout is reached because Skip may ignore commands sent before it is done
		//powering up.
		for (numRetries = 0; (numRetries < maxNumRetries) && (kResponse_OK == nResult) && (!bSuccess); numRetries++)
		{
			nResult = SendCmd(SKIP_CMD_ID_INIT,	pParams, nParamBytes);

			if (kResponse_OK == nResult)
			{
				unsigned int nTimeCmdSent = GUtils::OSGetTimeStamp();

				initStatusLength = sizeof(initStatus);
				initStatus = SKIP_STATUS_CMD_NOT_SUPPORTED;
				if (kResponse_OK == GetInitCmdResponse(&initStatus, &initStatusLength, nTimeoutMs, pExitFlag))
					bSuccess = true;
				else if ((sizeof(initStatus) == initStatusLength) && (SKIP_STATUS_ERROR_SLAVE_POWERUP_INIT == initStatus))
				{
					unsigned int nTimeNow = GUtils::OSGetTimeStamp();
					unsigned int nElapsedTimeMs = nTimeNow - nTimeCmdSent;
					if (nElapsedTimeMs < nTimeoutMs)
						GUtils::Sleep(nTimeoutMs - nElapsedTimeMs);
				}
			}
			else
				initStatusLength = 0;
		}

		if (!bSuccess)
			nResult = kResponse_Error;

		UnlockDevice();
	}
	else
		GSTD_ASSERT(0);	// Can't use this device -- some other thread has it open!

	if (pRespBuf && pnRespBytes)
	{
		if (((*pnRespBytes) >= initStatusLength) && (initStatusLength > 0))
		{
			(*pnRespBytes) = initStatusLength;
			memcpy(pRespBuf, &initStatus, initStatusLength);
		}
		else
			(*pnRespBytes) = 0;
	}

	return nResult;
}
Example #13
0
ALenum InitializeEffect(ALCdevice *Device, ALeffectslot *EffectSlot, ALeffect *effect)
{
    ALenum newtype = (effect ? effect->type : AL_EFFECT_NULL);
    ALeffectState *State = NULL;
    ALenum err = AL_NO_ERROR;

    LockDevice(Device);
    if(newtype == AL_EFFECT_NULL && EffectSlot->effect.type != AL_EFFECT_NULL)
    {
        State = NoneCreate();
        if(!State) err = AL_OUT_OF_MEMORY;
    }
    else if(newtype == AL_EFFECT_EAXREVERB || newtype == AL_EFFECT_REVERB)
    {
        if(EffectSlot->effect.type != AL_EFFECT_EAXREVERB && EffectSlot->effect.type != AL_EFFECT_REVERB)
        {
            State = ReverbCreate();
            if(!State) err = AL_OUT_OF_MEMORY;
        }
    }
    else if(newtype == AL_EFFECT_ECHO && EffectSlot->effect.type != AL_EFFECT_ECHO)
    {
        State = EchoCreate();
        if(!State) err = AL_OUT_OF_MEMORY;
    }
    else if(newtype == AL_EFFECT_RING_MODULATOR && EffectSlot->effect.type != AL_EFFECT_RING_MODULATOR)
    {
        State = ModulatorCreate();
        if(!State) err = AL_OUT_OF_MEMORY;
    }
    else if(newtype == AL_EFFECT_DEDICATED_DIALOGUE || newtype == AL_EFFECT_DEDICATED_LOW_FREQUENCY_EFFECT)
    {
        if(EffectSlot->effect.type != AL_EFFECT_DEDICATED_DIALOGUE && EffectSlot->effect.type != AL_EFFECT_DEDICATED_LOW_FREQUENCY_EFFECT)
        {
            State = DedicatedCreate();
            if(!State) err = AL_OUT_OF_MEMORY;
        }
    }

    if(err != AL_NO_ERROR)
    {
        UnlockDevice(Device);
        return err;
    }

    if(State)
    {
        int oldMode;
        oldMode = SetMixerFPUMode();

        if(ALeffectState_DeviceUpdate(State, Device) == AL_FALSE)
        {
            RestoreFPUMode(oldMode);
            UnlockDevice(Device);
            ALeffectState_Destroy(State);
            return AL_OUT_OF_MEMORY;
        }
        State = ExchangePtr((XchgPtr*)&EffectSlot->EffectState, State);

        if(!effect)
            memset(&EffectSlot->effect, 0, sizeof(EffectSlot->effect));
        else
            memcpy(&EffectSlot->effect, effect, sizeof(*effect));
        /* FIXME: This should be done asynchronously, but since the EffectState
         * object was changed, it needs an update before its Process method can
         * be called. */
        EffectSlot->NeedsUpdate = AL_FALSE;
        ALeffectState_Update(EffectSlot->EffectState, Device, EffectSlot);
        UnlockDevice(Device);

        RestoreFPUMode(oldMode);

        ALeffectState_Destroy(State);
        State = NULL;
    }
    else
    {
        if(!effect)
            memset(&EffectSlot->effect, 0, sizeof(EffectSlot->effect));
        else
            memcpy(&EffectSlot->effect, effect, sizeof(*effect));
        UnlockDevice(Device);
        EffectSlot->NeedsUpdate = AL_TRUE;
    }

    return AL_NO_ERROR;
}