/**
Remove the device and all its children from the bus.
@param Device The device to remove.
@retval EFI_SUCCESS The device is removed.
**/
EFI_STATUS
UsbRemoveDevice (
IN USB_DEVICE *Device
)
{
USB_BUS *Bus;
USB_DEVICE *Child;
EFI_STATUS Status;
EFI_STATUS ReturnStatus;
UINTN Index;
Bus = Device->Bus;
//
// Remove all the devices on its downstream ports. Search from devices[1].
// Devices[0] is the root hub.
//
ReturnStatus = EFI_SUCCESS;
for (Index = 1; Index < Bus->MaxDevices; Index++) {
Child = Bus->Devices[Index];
if ((Child == NULL) || (Child->ParentAddr != Device->Address)) {
continue;
}
DBG("Remove child %d\n", Index);
Status = UsbRemoveDevice (Child);
if (!EFI_ERROR (Status)) {
Bus->Devices[Index] = NULL;
} else {
Bus->Devices[Index]->DisconnectFail = TRUE;
ReturnStatus = Status;
// DEBUG ((EFI_D_INFO, "UsbRemoveDevice: failed to remove child %p at parent %p\n", Child, Device));
DBG("UsbRemoveDevice: failed to remove child %p at parent %p\n", Child, Device);
}
}
if (EFI_ERROR (ReturnStatus)) {
return ReturnStatus;
}
Status = UsbRemoveConfig (Device);
if (!EFI_ERROR (Status)) {
// DEBUG (( EFI_D_INFO, "UsbRemoveDevice: device %d removed\n", Device->Address));
DBG("UsbRemoveDevice: device %d removed\n", Device->Address);
// ASSERT (Device->Address < Bus->MaxDevices);
if (Device->Address >= Bus->MaxDevices) {
DBG("Device->Address=%d > %d\n", Device->Address, Bus->MaxDevices);
return EFI_DEVICE_ERROR;
}
Bus->Devices[Device->Address] = NULL;
UsbFreeDevice (Device);
} else {
Bus->Devices[Device->Address]->DisconnectFail = TRUE;
}
return Status;
}
EFI_STATUS
UsbRemoveDevice (
IN USB_DEVICE *Device
)
/*++
Routine Description:
Remove the device and all its children from the bus.
Arguments:
Device - The device to remove
Returns:
EFI_SUCCESS - The device is removed
--*/
{
USB_BUS *Bus;
USB_DEVICE *Child;
EFI_STATUS Status;
UINT8 Index;
Bus = Device->Bus;
//
// Remove all the devices on its downstream ports. Search from devices[1].
// Devices[0] is the root hub.
//
for (Index = 1; Index < USB_MAX_DEVICES; Index++) {
Child = Bus->Devices[Index];
if ((Child == NULL) || (Child->ParentAddr != Device->Address)) {
continue;
}
Status = UsbRemoveDevice (Child);
if (EFI_ERROR (Status)) {
USB_ERROR (("UsbRemoveDevice: failed to remove child, ignore error\n"));
Bus->Devices[Index] = NULL;
}
}
UsbRemoveConfig (Device);
USB_DEBUG (("UsbRemoveDevice: device %d removed\n", Device->Address));
Bus->Devices[Device->Address] = NULL;
UsbFreeDevice (Device);
return EFI_SUCCESS;
}
/**
Remove the device and all its children from the bus.
@param Device The device to remove.
@retval EFI_SUCCESS The device is removed.
**/
EFI_STATUS
UsbRemoveDevice (
IN USB_DEVICE *Device
)
{
USB_BUS *Bus;
USB_DEVICE *Child;
EFI_STATUS Status;
UINTN Index;
Bus = Device->Bus;
//
// Remove all the devices on its downstream ports. Search from devices[1].
// Devices[0] is the root hub.
//
for (Index = 1; Index < Bus->MaxDevices; Index++) {
Child = Bus->Devices[Index];
if ((Child == NULL) || (Child->ParentAddr != Device->Address)) {
continue;
}
Status = UsbRemoveDevice (Child);
if (EFI_ERROR (Status)) {
DEBUG ((EFI_D_ERROR, "UsbRemoveDevice: failed to remove child, ignore error\n"));
Bus->Devices[Index] = NULL;
}
}
UsbRemoveConfig (Device);
DEBUG (( EFI_D_INFO, "UsbRemoveDevice: device %d removed\n", Device->Address));
ASSERT (Device->Address < Bus->MaxDevices);
Bus->Devices[Device->Address] = NULL;
UsbFreeDevice (Device);
return EFI_SUCCESS;
}
STATIC
EFI_STATUS
UsbEnumerateNewDev (
IN USB_INTERFACE *HubIf,
IN UINT8 Port
)
/*++
Routine Description:
Enumerate and configure the new device on the port of this HUB interface.
Arguments:
HubIf - The HUB that has the device connected
Port - The port index of the hub (started with zero)
Returns:
EFI_SUCCESS - The device is enumerated (added or removed)
EFI_OUT_OF_RESOURCES - Failed to allocate resource for the device
Others - Failed to enumerate the device
--*/
{
USB_BUS *Bus;
USB_HUB_API *HubApi;
USB_DEVICE *Child;
USB_DEVICE *Parent;
EFI_USB_PORT_STATUS PortState;
UINT8 Address;
UINT8 Config;
EFI_STATUS Status;
Address = USB_MAX_DEVICES;
Parent = HubIf->Device;
Bus = Parent->Bus;
HubApi = HubIf->HubApi;
gBS->Stall (USB_WAIT_PORT_STABLE_STALL);
//
// Hub resets the device for at least 10 milliseconds.
// Host learns device speed. If device is of low/full speed
// and the hub is a EHCI root hub, ResetPort will release
// the device to its companion UHCI and return an error.
//
Status = HubApi->ResetPort (HubIf, Port);
if (EFI_ERROR (Status)) {
USB_ERROR (("UsbEnumerateNewDev: failed to reset port %d - %r\n", Port, Status));
return Status;
}
USB_DEBUG (("UsbEnumerateNewDev: hub port %d is reset\n", Port));
Child = UsbCreateDevice (HubIf, Port);
if (Child == NULL) {
return EFI_OUT_OF_RESOURCES;
}
//
// OK, now identify the device speed. After reset, hub
// fully knows the actual device speed.
//
Status = HubApi->GetPortStatus (HubIf, Port, &PortState);
if (EFI_ERROR (Status)) {
USB_ERROR (("UsbEnumerateNewDev: failed to get speed of port %d\n", Port));
goto ON_ERROR;
}
if (USB_BIT_IS_SET (PortState.PortStatus, USB_PORT_STAT_LOW_SPEED)) {
Child->Speed = EFI_USB_SPEED_LOW;
} else if (USB_BIT_IS_SET (PortState.PortStatus, USB_PORT_STAT_HIGH_SPEED)) {
Child->Speed = EFI_USB_SPEED_HIGH;
} else {
Child->Speed = EFI_USB_SPEED_FULL;
}
USB_DEBUG (("UsbEnumerateNewDev: device is of %d speed\n", Child->Speed));
if (Child->Speed != EFI_USB_SPEED_HIGH) {
//
// If the child isn't a high speed device, it is necessary to
// set the transaction translator. Port TT is 1-based.
// This is quite simple:
// 1. if parent is of high speed, then parent is our translator
// 2. otherwise use parent's translator.
//
if (Parent->Speed == EFI_USB_SPEED_HIGH) {
Child->Translator.TranslatorHubAddress = Parent->Address;
Child->Translator.TranslatorPortNumber = Port + 1;
} else {
Child->Translator = Parent->Translator;
}
USB_DEBUG (("UsbEnumerateNewDev: device uses translator (%d, %d)\n",
Child->Translator.TranslatorHubAddress,
Child->Translator.TranslatorPortNumber));
}
//
// After port is reset, hub establishes a signal path between
// the device and host (DEFALUT state). Device¡¯s registers are
// reset, use default address 0 (host enumerates one device at
// a time) , and ready to respond to control transfer at EP 0.
//
//
// Host sends a Get_Descriptor request to learn the max packet
// size of default pipe (only part of the device¡¯s descriptor).
//
Status = UsbGetMaxPacketSize0 (Child);
if (EFI_ERROR (Status)) {
USB_ERROR (("UsbEnumerateNewDev: failed to get max packet for EP 0 - %r\n", Status));
goto ON_ERROR;
}
USB_DEBUG (("UsbEnumerateNewDev: max packet size for EP 0 is %d\n", Child->MaxPacket0));
//
// Host assigns an address to the device. Device completes the
// status stage with default address, then switches to new address.
// ADDRESS state. Address zero is reserved for root hub.
//
for (Address = 1; Address < USB_MAX_DEVICES; Address++) {
if (Bus->Devices[Address] == NULL) {
break;
}
}
if (Address == USB_MAX_DEVICES) {
USB_ERROR (("UsbEnumerateNewDev: address pool is full for port %d\n", Port));
Status = EFI_ACCESS_DENIED;
goto ON_ERROR;
}
Bus->Devices[Address] = Child;
Status = UsbSetAddress (Child, Address);
Child->Address = Address;
if (EFI_ERROR (Status)) {
USB_ERROR (("UsbEnumerateNewDev: failed to set device address - %r\n", Status));
goto ON_ERROR;
}
gBS->Stall (USB_SET_DEVICE_ADDRESS_STALL);
USB_DEBUG (("UsbEnumerateNewDev: device is now ADDRESSED at %d\n", Address));
//
// Host learns about the device¡¯s abilities by requesting device's
// entire descriptions.
//
Status = UsbBuildDescTable (Child);
if (EFI_ERROR (Status)) {
USB_ERROR (("UsbEnumerateNewDev: failed to build descriptor table - %r\n", Status));
goto ON_ERROR;
}
//
// Select a default configuration: UEFI must set the configuration
// before the driver can connect to the device.
//
Config = Child->DevDesc->Configs[0]->Desc.ConfigurationValue;
Status = UsbSetConfig (Child, Config);
if (EFI_ERROR (Status)) {
USB_ERROR (("UsbEnumerateNewDev: failed to set configure %d - %r\n", Config, Status));
goto ON_ERROR;
}
USB_DEBUG (("UsbEnumerateNewDev: device %d is now in CONFIGED state\n", Address));
//
// Host assigns and loads a device driver.
//
Status = UsbSelectConfig (Child, Config);
if (EFI_ERROR (Status)) {
USB_ERROR (("UsbEnumerateNewDev: failed to create interfaces - %r\n", Status));
goto ON_ERROR;
}
return EFI_SUCCESS;
ON_ERROR:
if (Address != USB_MAX_DEVICES) {
Bus->Devices[Address] = NULL;
}
if (Child != NULL) {
UsbFreeDevice (Child);
}
return Status;
}
