void DAC12_Vin_SWtrig(DAC_MemMapPtr dacx_base_ptr, unsigned char VrefSel) {
DAC_C0_REG(dacx_base_ptr) = (
DAC_BFB_PTR_INT_DISABLE | // DACBIE =0 , buffer read pointer bottom flag interrupt is disabled
DAC_BFT_PTR_INT_DISABLE | // DACTIE = 0 ,buffer read pointer top flag interrupt is disabled
DAC_BFWM_INT_DISABLE | // DACWIE = 0, buffer water mark interrupt disabled
DAC_HP_MODE | // LPEN = 0, low power mode
DAC_SW_TRIG_STOP | // NO Software trigger yet
DAC_SEL_SW_TRIG | // DACTSEL =1, Databuffer outputs to DACO pin whenever a write to DACDAT0
VrefSel |
DAC_ENABLE //DAC enalbed
);
if ( VrefSel == DAC_SEL_VREFO ) {
VREF_Init();
}// end of if
DAC_C1_REG(dacx_base_ptr)= (
DAC_BF_DISABLE | // Buffer read pointer is disabled, converted data is always the first word of buffer = DACCCDAT0
DAC_BF_NORMAL_MODE |
DAC_BFWM_1WORD |
DAC_DMA_DISABLE
) ;
DAC_C2_REG(dacx_base_ptr) = DAC_SET_PTR_AT_BF(0)| DAC_SET_PTR_UP_LIMIT(0x0f);
}// end of DAC12_Vin_SWtrig
void DAC12_buffered (DAC_MemMapPtr dacx_base_ptr, byte WatermarkMode, byte BuffMode, byte Vreference, byte TrigMode, byte BuffInitPos,byte BuffUpLimit){
DAC_C0_REG(dacx_base_ptr) = (
DAC_BFB_PTR_INT_DISABLE |
DAC_BFT_PTR_INT_DISABLE |
DAC_BFWM_INT_DISABLE |
DAC_HP_MODE |
DAC_SW_TRIG_STOP |
TrigMode |
Vreference |
DAC_ENABLE // DAC enalbed
);
if ( Vreference == DAC_SEL_VREFO ) {
VREF_Init();
}// end of if
DAC_C1_REG(dacx_base_ptr) = (
DAC_BF_ENABLE | //Buffer Enabled
WatermarkMode | // set 1, 2, 3,or 4 word(s) mode
BuffMode // set traversal mode, normal, swing, or onetime
) ;
DAC_C2_REG(dacx_base_ptr) = BuffInitPos | BuffUpLimit;
}//end of DAC12_buffered
/**
* @brief 快速初始化VREF模块
* @note VREF被初始化后 需要经过大概35MS 才能有稳定的参考电压输出
* \attention bufferMode对于不同的芯片，其可选的参数视不同的，比如K60只能是00和10，而K64有三种模式可选
* @retval None
*/
void VREF_QuickInit(void)
{
VREF_InitTypeDef VREF_InitStruct1;
VREF_InitStruct1.instance = 0;
VREF_InitStruct1.bufferMode = kVREF_BufferMode_Lv1;
VREF_Init(&VREF_InitStruct1);
}
void Peripherals_Init(void)
{
#ifdef NVIC_AUTOINIT
NVIC_Init();
#endif /* NVIC_AUTOINIT */
#ifdef SIM_AUTOINIT
SIM_Init();
#endif /* SIM_AUTOINIT */
#ifdef MCM_AUTOINIT
MCM_Init();
#endif /* MCM_AUTOINIT */
#ifdef PMC_AUTOINIT
PMC_Init();
#endif /* PMC_AUTOINIT */
#ifdef PORTA_AUTOINIT
PORTA_Init();
#endif /* PORTA_AUTOINIT */
#ifdef PORTB_AUTOINIT
PORTB_Init();
#endif /* PORTB_AUTOINIT */
#ifdef PORTC_AUTOINIT
PORTC_Init();
#endif /* PORTC_AUTOINIT */
#ifdef PORTD_AUTOINIT
PORTD_Init();
#endif /* PORTD_AUTOINIT */
#ifdef PORTE_AUTOINIT
PORTE_Init();
#endif /* PORTE_AUTOINIT */
#ifdef ADC0_AUTOINIT
ADC0_Init();
#endif /* ADC0_AUTOINIT */
#ifdef ADC1_AUTOINIT
ADC1_Init();
#endif /* ADC1_AUTOINIT */
#ifdef AIPS0_AUTOINIT
AIPS0_Init();
#endif /* AIPS0_AUTOINIT */
#ifdef AIPS1_AUTOINIT
AIPS1_Init();
#endif /* AIPS1_AUTOINIT */
#ifdef AXBS_AUTOINIT
AXBS_Init();
#endif /* AXBS_AUTOINIT */
#ifdef CAN0_AUTOINIT
CAN0_Init();
#endif /* CAN0_AUTOINIT */
#ifdef CMP0_AUTOINIT
CMP0_Init();
#endif /* CMP0_AUTOINIT */
#ifdef CMP1_AUTOINIT
CMP1_Init();
#endif /* CMP1_AUTOINIT */
#ifdef CMP2_AUTOINIT
CMP2_Init();
#endif /* CMP2_AUTOINIT */
#ifdef CMT_AUTOINIT
CMT_Init();
#endif /* CMT_AUTOINIT */
#ifdef CRC_AUTOINIT
CRC_Init();
#endif /* CRC_AUTOINIT */
#ifdef DAC0_AUTOINIT
DAC0_Init();
#endif /* DAC0_AUTOINIT */
#ifdef DMAMUX_AUTOINIT
DMAMUX_Init();
#endif /* DMAMUX_AUTOINIT */
#ifdef DMA_AUTOINIT
DMA_Init();
#endif /* DMA_AUTOINIT */
#ifdef ENET_AUTOINIT
ENET_Init();
#endif /* ENET_AUTOINIT */
#ifdef EWM_AUTOINIT
EWM_Init();
#endif /* EWM_AUTOINIT */
#ifdef FB_AUTOINIT
FB_Init();
#endif /* FB_AUTOINIT */
#ifdef FMC_AUTOINIT
FMC_Init();
#endif /* FMC_AUTOINIT */
#ifdef FTFE_AUTOINIT
FTFE_Init();
#endif /* FTFE_AUTOINIT */
#ifdef FTM0_AUTOINIT
FTM0_Init();
#endif /* FTM0_AUTOINIT */
#ifdef FTM1_AUTOINIT
FTM1_Init();
#endif /* FTM1_AUTOINIT */
#ifdef FTM2_AUTOINIT
FTM2_Init();
#endif /* FTM2_AUTOINIT */
#ifdef FTM3_AUTOINIT
FTM3_Init();
#endif /* FTM3_AUTOINIT */
#ifdef I2C0_AUTOINIT
I2C0_Init();
#endif /* I2C0_AUTOINIT */
#ifdef I2C1_AUTOINIT
I2C1_Init();
#endif /* I2C1_AUTOINIT */
#ifdef I2C2_AUTOINIT
I2C2_Init();
#endif /* I2C2_AUTOINIT */
#ifdef I2S0_AUTOINIT
I2S0_Init();
#endif /* I2S0_AUTOINIT */
#ifdef LLWU_AUTOINIT
LLWU_Init();
#endif /* LLWU_AUTOINIT */
#ifdef LPTMR0_AUTOINIT
LPTMR0_Init();
#endif /* LPTMR0_AUTOINIT */
#ifdef MPU_AUTOINIT
MPU_Init();
#endif /* MPU_AUTOINIT */
#ifdef PDB0_AUTOINIT
PDB0_Init();
#endif /* PDB0_AUTOINIT */
#ifdef PIT_AUTOINIT
PIT_Init();
#endif /* PIT_AUTOINIT */
#ifdef PTA_AUTOINIT
PTA_Init();
#endif /* PTA_AUTOINIT */
#ifdef PTB_AUTOINIT
PTB_Init();
#endif /* PTB_AUTOINIT */
#ifdef PTC_AUTOINIT
PTC_Init();
#endif /* PTC_AUTOINIT */
#ifdef PTD_AUTOINIT
PTD_Init();
#endif /* PTD_AUTOINIT */
#ifdef PTE_AUTOINIT
PTE_Init();
#endif /* PTE_AUTOINIT */
#ifdef RCM_AUTOINIT
RCM_Init();
#endif /* RCM_AUTOINIT */
#ifdef RNG_AUTOINIT
RNG_Init();
#endif /* RNG_AUTOINIT */
#ifdef RTC_AUTOINIT
RTC_Init();
#endif /* RTC_AUTOINIT */
#ifdef SDHC_AUTOINIT
SDHC_Init();
#endif /* SDHC_AUTOINIT */
#ifdef SMC_AUTOINIT
SMC_Init();
#endif /* SMC_AUTOINIT */
#ifdef SPI0_AUTOINIT
SPI0_Init();
#endif /* SPI0_AUTOINIT */
#ifdef SPI1_AUTOINIT
SPI1_Init();
#endif /* SPI1_AUTOINIT */
#ifdef SPI2_AUTOINIT
SPI2_Init();
#endif /* SPI2_AUTOINIT */
#ifdef SystemControl_AUTOINIT
SystemControl_Init();
#endif /* SystemControl_AUTOINIT */
#ifdef SysTick_AUTOINIT
SysTick_Init();
#endif /* SysTick_AUTOINIT */
#ifdef UART0_AUTOINIT
UART0_Init();
#endif /* UART0_AUTOINIT */
#ifdef UART1_AUTOINIT
UART1_Init();
#endif /* UART1_AUTOINIT */
#ifdef UART2_AUTOINIT
UART2_Init();
#endif /* UART2_AUTOINIT */
#ifdef UART3_AUTOINIT
UART3_Init();
#endif /* UART3_AUTOINIT */
#ifdef UART4_AUTOINIT
UART4_Init();
#endif /* UART4_AUTOINIT */
#ifdef UART5_AUTOINIT
UART5_Init();
#endif /* UART5_AUTOINIT */
#ifdef USB0_AUTOINIT
USB0_Init();
#endif /* USB0_AUTOINIT */
#ifdef USBDCD_AUTOINIT
USBDCD_Init();
#endif /* USBDCD_AUTOINIT */
#ifdef VREF_AUTOINIT
VREF_Init();
#endif /* VREF_AUTOINIT */
#ifdef WDOG_AUTOINIT
WDOG_Init();
#endif /* WDOG_AUTOINIT */
}
