void QgsGrassEditAddVertex::mouseMove( QgsPoint & newPoint )
{
if ( e->mSelectedLine > 0 )
{
Vect_reset_line( e->mPoints );
if ( e->mAddVertexEnd )
{
Vect_append_point( e->mPoints, e->mEditPoints->x[e->mSelectedPart],
e->mEditPoints->y[e->mSelectedPart], 0.0 );
Vect_append_point( e->mPoints, newPoint.x(), newPoint.y(), 0.0 );
}
else
{
Vect_append_point( e->mPoints, e->mEditPoints->x[e->mSelectedPart-1],
e->mEditPoints->y[e->mSelectedPart-1], 0.0 );
Vect_append_point( e->mPoints, newPoint.x(), newPoint.y(), 0.0 );
Vect_append_point( e->mPoints, e->mEditPoints->x[e->mSelectedPart],
e->mEditPoints->y[e->mSelectedPart], 0.0 );
}
for ( int i = 0; i < e->mPoints->n_points; i++ )
{
QgsDebugMsg( QString( "%1 %2" ).arg( e->mPoints->x[i] ).arg( e->mPoints->y[i] ) );
}
e->displayDynamic( e->mPoints );
}
}
int
pie(double cx, double cy, int size, double *val, int ncols, COLOR * ocolor,
COLOR * colors)
{
int i, j, n;
double a, end_ang, ang, tot_sum, sum, step, r;
double x, y;
struct line_pnts *Points;
G_debug(4, "pie(): cx = %f cy = %f", cx, cy);
Points = Vect_new_line_struct();
/* Calc sum */
tot_sum = 0;
for (i = 0; i < ncols; i++)
tot_sum += val[i];
step = PI / 180;
r = (D_d_to_u_col(2) - D_d_to_u_col(1)) * size / 2; /* do it better */
/* Draw polygon for each value */
sum = 0;
ang = 0;
for (i = 0; i < ncols; i++) {
sum += val[i];
end_ang = 2 * PI * sum / tot_sum;
Vect_reset_line(Points);
if (val[0] != tot_sum) /* all in one slice, don't draw line to center */
Vect_append_point(Points, cx, cy, 0);
n = (int)ceil((end_ang - ang) / step);
for (j = 0, a = ang; j <= n; j++, a += step) {
if (a > end_ang)
a = end_ang;
x = cx + r * cos(a);
y = cy + r * sin(a);
Vect_append_point(Points, x, y, 0);
}
ang = end_ang;
if (val[0] != tot_sum)
Vect_append_point(Points, cx, cy, 0);
if (!colors[i].none) {
D_RGB_color(colors[i].r, colors[i].g, colors[i].b);
D_polygon_abs(Points->x, Points->y, Points->n_points);
}
D_RGB_color(ocolor->r, ocolor->g, ocolor->b);
D_polyline_abs(Points->x, Points->y, Points->n_points);
}
Vect_destroy_line_struct(Points);
return 0;
}
/*!
\brief Create line segment.
Creates segment of InPoints from start to end measured along the
line and write it to OutPoints.
If the distance is greater than line length or negative, error is
returned.
\param InPoints input line
\param start segment number
\param end segment number
\param OutPoints output line
\return 1 success
\return 0 error when start > length or end < 0 or start < 0 or end > length
*/
int Vect_line_segment(const struct line_pnts *InPoints, double start, double end,
struct line_pnts *OutPoints)
{
int i, seg1, seg2;
double length, tmp;
double x1, y1, z1, x2, y2, z2;
G_debug(3, "Vect_line_segment(): start = %f, end = %f, n_points = %d",
start, end, InPoints->n_points);
Vect_reset_line(OutPoints);
if (start > end) {
tmp = start;
start = end;
end = tmp;
}
/* Check start/end */
if (end < 0)
return 0;
length = Vect_line_length(InPoints);
if (start > length)
return 0;
/* Find coordinates and segments of start/end */
seg1 = Vect_point_on_line(InPoints, start, &x1, &y1, &z1, NULL, NULL);
seg2 = Vect_point_on_line(InPoints, end, &x2, &y2, &z2, NULL, NULL);
G_debug(3, " -> seg1 = %d seg2 = %d", seg1, seg2);
if (seg1 == 0 || seg2 == 0) {
G_warning(_("Segment outside line, no segment created"));
return 0;
}
Vect_append_point(OutPoints, x1, y1, z1);
for (i = seg1; i < seg2; i++) {
Vect_append_point(OutPoints, InPoints->x[i], InPoints->y[i],
InPoints->z[i]);
};
Vect_append_point(OutPoints, x2, y2, z2);
Vect_line_prune(OutPoints);
return 1;
}
void writePolyline( struct Map_info* map, int type, const QgsPolyline& polyline, struct line_cats *cats )
{
Vect_reset_line( line );
Q_FOREACH ( const QgsPoint& point, polyline )
{
Vect_append_point( line, point.x(), point.y(), 0 );
}
void write_point(struct Map_info *Out, double x, double y, double z,
int line_cat, double along, int table)
{
char buf[2000];
G_debug(3, "write_point()");
Vect_reset_line(PPoints);
Vect_reset_cats(PCats);
/* Write point */
Vect_append_point(PPoints, x, y, z);
Vect_cat_set(PCats, 1, line_cat);
Vect_cat_set(PCats, 2, point_cat);
Vect_write_line(Out, GV_POINT, PPoints, PCats);
/* Attributes */
if (!table) {
db_zero_string(&stmt);
sprintf(buf, "insert into %s values ( %d, %d, %.15g )", Fi->table,
point_cat, line_cat, along);
db_append_string(&stmt, buf);
if (db_execute_immediate(driver, &stmt) != DB_OK) {
G_warning(_("Unable to insert new record: '%s'"),
db_get_string(&stmt));
}
}
point_cat++;
}
static int ring2pts(const GEOSGeometry *geom, struct line_pnts *Points)
{
int i, ncoords;
double x, y, z;
const GEOSCoordSequence *seq = NULL;
G_debug(3, "ring2pts()");
Vect_reset_line(Points);
if (!geom) {
G_warning(_("Invalid GEOS geometry!"));
return 0;
}
z = 0.0;
ncoords = GEOSGetNumCoordinates(geom);
if (!ncoords) {
G_warning(_("No coordinates in GEOS geometry (can be ok for negative distance)!"));
return 0;
}
seq = GEOSGeom_getCoordSeq(geom);
for (i = 0; i < ncoords; i++) {
GEOSCoordSeq_getX(seq, i, &x);
GEOSCoordSeq_getY(seq, i, &y);
if (x != x || x > DBL_MAX || x < -DBL_MAX)
G_fatal_error(_("Invalid x coordinate %f"), x);
if (y != y || y > DBL_MAX || y < -DBL_MAX)
G_fatal_error(_("Invalid y coordinate %f"), y);
Vect_append_point(Points, x, y, z);
}
return 1;
}
/* Writes a site to file open on fptr. */
int G_site_put(struct Map_info *Map, const Site * s)
{
static struct line_pnts *Points = NULL;
static struct line_cats *Cats = NULL;
if (Points == NULL)
Points = Vect_new_line_struct();
if (Cats == NULL)
Cats = Vect_new_cats_struct();
Vect_reset_line(Points);
Vect_reset_cats(Cats);
/* no 3D support so far: s->dim[0] */
Vect_append_point(Points, s->east, s->north, 0.0);
G_debug(4, "cattype = %d", s->cattype);
if (s->cattype == FCELL_TYPE || s->cattype == DCELL_TYPE)
G_fatal_error(_("Category must be integer"));
if (s->cattype == CELL_TYPE)
Vect_cat_set(Cats, 1, s->ccat);
Vect_write_line(Map, GV_POINT, Points, Cats);
return 0;
}
void writePolyline( struct Map_info* map, int type, QgsPolyline polyline, struct line_cats *cats )
{
Vect_reset_line( line );
foreach ( QgsPoint point, polyline )
{
Vect_append_point( line, point.x(), point.y(), 0 );
}
void QgsGrassEditNewLine::mouseMove( QgsPoint & newPoint )
{
if ( e->mEditPoints->n_points > 0 )
{
// Draw the line with new segment
Vect_reset_line( e->mPoints );
Vect_append_points( e->mPoints, e->mEditPoints, GV_FORWARD );
Vect_append_point( e->mPoints, newPoint.x(), newPoint.y(), 0.0 );
e->displayDynamic( e->mPoints );
}
}
/* writes binary and ASCII digit files and supplemental file */
static int write_bnd(struct COOR *line_begin, struct COOR *line_end, /* start and end point of line */
int n /* number of points to write */
)
{
static struct line_pnts *points = NULL;
double x;
double y;
struct COOR *p, *last;
int i;
if (!points)
points = Vect_new_line_struct();
Vect_reset_line(points);
p = line_begin;
y = cell_head.north - (double)p->row * cell_head.ns_res;
x = cell_head.west + (double)p->col * cell_head.ew_res;
Vect_append_point(points, x, y, 0.0);
for (i = 0; i < n; i++) {
last = p;
/* this should NEVER happen */
if ((p = move(p)) == NULPTR)
G_fatal_error(_("write_bnd: line terminated unexpectedly\n"
"previous (%d) point %p (%d,%d,%d) %p %p"),
direction, last, last->row, last->col, last->node,
last->fptr, last->bptr);
y = cell_head.north - p->row * cell_head.ns_res;
x = cell_head.west + p->col * cell_head.ew_res;
Vect_append_point(points, x, y, 0.0);
}
Vect_write_line(&Map, GV_BOUNDARY, points, Cats);
return 0;
}
/*!
\brief Writes point
Writes GV_POINT to Out at the position of the node in <em>In</em>.
\param In pointer to Map_info structure (input vector map)
\param[in,out] Out pointer to Map_info structure (output vector map)
\param node node id
\param Cats pointer to line_cats structures
*/
void NetA_add_point_on_node(struct Map_info *In, struct Map_info *Out,
int node, struct line_cats *Cats)
{
static struct line_pnts *Points;
double x, y, z;
Points = Vect_new_line_struct();
Vect_get_node_coor(In, node, &x, &y, &z);
Vect_reset_line(Points);
Vect_append_point(Points, x, y, z);
Vect_write_line(Out, GV_POINT, Points, Cats);
Vect_destroy_line_struct(Points);
}
/*!
\brief Creates buffer around the point (px, py).
\param px input point x-coordinate
\param py input point y-coordinate
\param da distance along major axis
\param da distance along minor axis
\param dalpha angle between 0x and major axis
\param round make corners round
\param tol maximum distance between theoretical arc and output segments
\param[out] nPoints output polygon outer border (ccw order)
*/
void Vect_point_buffer2(double px, double py, double da, double db,
double dalpha, int round, double tol,
struct line_pnts **oPoints)
{
double tx, ty;
double angular_tol, angular_step, phi1;
int j, nsegments;
G_debug(2, "Vect_point_buffer()");
*oPoints = Vect_new_line_struct();
dalpha *= PI / 180; /* convert dalpha from degrees to radians */
if (round || (!round)) {
angular_tol = angular_tolerance(tol, da, db);
nsegments = (int)(2 * PI / angular_tol) + 1;
angular_step = 2 * PI / nsegments;
phi1 = 0;
for (j = 0; j < nsegments; j++) {
elliptic_transform(cos(phi1), sin(phi1), da, db, dalpha, &tx,
&ty);
Vect_append_point(*oPoints, px + tx, py + ty, 0);
phi1 += angular_step;
}
}
else {
}
/* close the output line */
Vect_append_point(*oPoints, (*oPoints)->x[0], (*oPoints)->y[0],
(*oPoints)->z[0]);
return;
}
/*!
\brief Reads feature from OGR layer (topology level)
This function implements random access on level 2.
\param Map pointer to Map_info structure
\param[out] line_p container used to store line points within
\param[out] line_c container used to store line categories within
\param line feature id
\return feature type
\return -2 no more features
\return -1 out of memory
*/
int V2_read_line_ogr(struct Map_info *Map, struct line_pnts *line_p,
struct line_cats *line_c, int line)
{
struct P_line *Line;
G_debug(4, "V2_read_line_ogr() line = %d", line);
Line = Map->plus.Line[line];
if (Line == NULL)
G_fatal_error(_("Attempt to read dead feature %d"), line);
if (Line->type == GV_CENTROID) {
G_debug(4, "Centroid");
if (line_p != NULL) {
int i, found;
struct bound_box box;
struct boxlist list;
struct P_topo_c *topo = (struct P_topo_c *)Line->topo;
/* get area bbox */
Vect_get_area_box(Map, topo->area, &box);
/* search in spatial index for centroid with area bbox */
dig_init_boxlist(&list, 1);
Vect_select_lines_by_box(Map, &box, Line->type, &list);
found = 0;
for (i = 0; i < list.n_values; i++) {
if (list.id[i] == line) {
found = i;
break;
}
}
Vect_reset_line(line_p);
Vect_append_point(line_p, list.box[found].E, list.box[found].N, 0.0);
}
if (line_c != NULL) {
/* cat = FID and offset = FID for centroid */
Vect_reset_cats(line_c);
Vect_cat_set(line_c, 1, (int) Line->offset);
}
return GV_CENTROID;
}
return V1_read_line_ogr(Map, line_p, line_c, Line->offset);
}
void QgsGrassEditNewLine::activate()
{
QgsDebugMsg( "entered." );
// Display dynamic segment
if ( e->mEditPoints->n_points > 0 )
{
Vect_reset_line( e->mPoints );
Vect_append_points( e->mPoints, e->mEditPoints, GV_FORWARD );
QgsPoint point = toMapCoordinates( e->mCanvas->mouseLastXY() );
Vect_append_point( e->mPoints, point.x(), point.y(), 0.0 );
e->displayDynamic( e->mPoints );
}
QgsGrassEditTool::activate(); // call default bahivour
}
/************************************************************************
getpoint-- finds crossing point using linear interpolation,
converts from row-column to x-y space, and adds point to current line.
************************************************************************/
static void getpoint(struct cell *curr, double level,
struct Cell_head Cell, struct line_pnts *Points)
{
double x, y;
double ratio;
int p1, p2;
p1 = curr->edge;
p2 = (curr->edge + 1) % 4;
if (Rast_raster_cmp(&curr->z[p1], &curr->z[p2], DCELL_TYPE) == 0)
ratio = 1;
else if (Rast_is_d_null_value(&curr->z[p1]))
ratio = 1 / 2;
else if (Rast_is_d_null_value(&curr->z[p2]))
ratio = 1 / 2;
else
ratio = (level - curr->z[p1]) / (curr->z[p2] - curr->z[p1]);
switch (curr->edge) {
case 0:
y = curr->r;
x = curr->c + ratio;
break;
case 1:
y = curr->r + ratio;
x = curr->c + 1;
break;
case 2:
y = curr->r + 1;
x = curr->c + 1 - ratio;
break;
case 3:
y = curr->r + 1 - ratio;
x = curr->c;
break;
default:
G_fatal_error(_("Edge number out of range"));
}
/* convert r/c values to x/y values */
y = Cell.north - (y + .5) * Cell.ns_res;
x = Cell.west + (x + .5) * Cell.ew_res;
Vect_append_point(Points, x, y, level);
}
int point_save(double xmm, double ymm, double zmm, double err)
/*
c saves point deviations
c
*/
{
int cat;
Vect_reset_line(Pnts);
Vect_reset_cats(Cats);
Vect_append_point(Pnts, xmm, ymm, zmm);
cat = count;
Vect_cat_set(Cats, 1, cat);
Vect_write_line(&Map, GV_POINT, Pnts, Cats);
db_zero_string(&sql);
sprintf(buf, "insert into %s values ( %d ", f->table, cat);
db_append_string(&sql, buf);
sprintf(buf, ", %f", err);
db_append_string(&sql, buf);
db_append_string(&sql, ")");
G_debug(3, "%s", db_get_string(&sql));
if (db_execute_immediate(driver, &sql) != DB_OK) {
db_close_database(driver);
db_shutdown_driver(driver);
G_fatal_error(_("Cannot insert new row: %s"), db_get_string(&sql));
}
count++;
return 1;
}
void QgsGrassEditNewPoint::mouseClick( QgsPoint & point, Qt::MouseButton button )
{
if ( button != Qt::LeftButton )
return;
Vect_reset_line( e->mEditPoints );
e->snap( point );
Vect_append_point( e->mEditPoints, point.x(), point.y(), 0.0 );
int type;
if ( mNewCentroid ) // new centroid or point ?
type = GV_CENTROID;
else
type = GV_POINT;
int line;
line = e->writeLine( type, e->mEditPoints );
e->updateSymb();
e->displayUpdated();
if ( e->mAttributes )
{
e->mAttributes->setLine( line );
e->mAttributes->clear();
}
else
{
e->mAttributes = new QgsGrassAttributes( e, e->mProvider, line, e->mIface->mainWindow() );
}
for ( int i = 0; i < e->mCats->n_cats; i++ )
{
e->addAttributes( e->mCats->field[i], e->mCats->cat[i] );
}
e->mAttributes->show();
e->mAttributes->raise();
}
/*!
\brief Create buffer around the line line.
Buffer is closed counter clockwise polygon.
Warning: output line may contain loops!
\param InPoints input line
\param distance create buffer in distance
\param tolerance maximum distance between theoretical arc and polygon segments
\param[out] OutPoints output line
*/
void
Vect_line_buffer(struct line_pnts *InPoints, double distance,
double tolerance, struct line_pnts *OutPoints)
{
double dangle;
int side, npoints;
static struct line_pnts *Points = NULL;
static struct line_pnts *PPoints = NULL;
distance = fabs(distance);
dangle = 2 * acos(1 - tolerance / fabs(distance)); /* angle step */
if (Points == NULL)
Points = Vect_new_line_struct();
if (PPoints == NULL)
PPoints = Vect_new_line_struct();
/* Copy and prune input */
Vect_reset_line(Points);
Vect_append_points(Points, InPoints, GV_FORWARD);
Vect_line_prune(Points);
Vect_reset_line(OutPoints);
npoints = Points->n_points;
if (npoints <= 0) {
return;
}
else if (npoints == 1) { /* make a circle */
double angle, x, y;
for (angle = 0; angle < 2 * PI; angle += dangle) {
x = Points->x[0] + distance * cos(angle);
y = Points->y[0] + distance * sin(angle);
Vect_append_point(OutPoints, x, y, 0);
}
/* Close polygon */
Vect_append_point(OutPoints, OutPoints->x[0], OutPoints->y[0], 0);
}
else { /* 2 and more points */
for (side = 0; side < 2; side++) {
double angle, sangle;
double lx1, ly1, lx2, ly2;
double x, y, nx, ny, sx, sy, ex, ey;
/* Parallel on one side */
if (side == 0) {
Vect_line_parallel(Points, distance, tolerance, 0, PPoints);
Vect_append_points(OutPoints, PPoints, GV_FORWARD);
}
else {
Vect_line_parallel(Points, -distance, tolerance, 0, PPoints);
Vect_append_points(OutPoints, PPoints, GV_BACKWARD);
}
/* Arc at the end */
/* 2 points at theend of original line */
if (side == 0) {
lx1 = Points->x[npoints - 2];
ly1 = Points->y[npoints - 2];
lx2 = Points->x[npoints - 1];
ly2 = Points->y[npoints - 1];
}
else {
lx1 = Points->x[1];
ly1 = Points->y[1];
lx2 = Points->x[0];
ly2 = Points->y[0];
}
/* normalized vector */
vect(lx1, ly1, lx2, ly2, &nx, &ny);
/* starting point */
sangle = atan2(-nx, ny); /* starting angle */
sx = lx2 + ny * distance;
sy = ly2 - nx * distance;
/* end point */
ex = lx2 - ny * distance;
ey = ly2 + nx * distance;
Vect_append_point(OutPoints, sx, sy, 0);
/* arc */
for (angle = dangle; angle < PI; angle += dangle) {
x = lx2 + distance * cos(sangle + angle);
y = ly2 + distance * sin(sangle + angle);
Vect_append_point(OutPoints, x, y, 0);
}
Vect_append_point(OutPoints, ex, ey, 0);
}
/* Close polygon */
Vect_append_point(OutPoints, OutPoints->x[0], OutPoints->y[0], 0);
}
Vect_line_prune(OutPoints);
return;
}
/* parallel_line - remove duplicate points from input line and
* creates new parallel line in 'd' offset distance;
* 'tol' is tolerance between arc and polyline;
* this function doesn't care about created loops;
*
* New line is written to existing nPoints structure.
*/
static void parallel_line(struct line_pnts *Points, double d, double tol,
struct line_pnts *nPoints)
{
int i, j, np, na, side;
double *x, *y, nx, ny, tx, ty, vx, vy, ux, uy, wx, wy;
double atol, atol2, a, av, aw;
G_debug(4, "parallel_line()");
Vect_reset_line(nPoints);
Vect_line_prune(Points);
np = Points->n_points;
x = Points->x;
y = Points->y;
if (np == 0)
return;
if (np == 1) {
Vect_append_point(nPoints, x[0], y[0], 0); /* ? OK, should make circle for points ? */
return;
}
if (d == 0) {
Vect_copy_xyz_to_pnts(nPoints, x, y, NULL, np);
return;
}
side = (int)(d / fabs(d));
atol = 2 * acos(1 - tol / fabs(d));
for (i = 0; i < np - 1; i++) {
vect(x[i], y[i], x[i + 1], y[i + 1], &tx, &ty);
vx = ty * d;
vy = -tx * d;
nx = x[i] + vx;
ny = y[i] + vy;
Vect_append_point(nPoints, nx, ny, 0);
nx = x[i + 1] + vx;
ny = y[i + 1] + vy;
Vect_append_point(nPoints, nx, ny, 0);
if (i < np - 2) { /* use polyline instead of arc between line segments */
vect(x[i + 1], y[i + 1], x[i + 2], y[i + 2], &ux, &uy);
wx = uy * d;
wy = -ux * d;
av = atan2(vy, vx);
aw = atan2(wy, wx);
a = (aw - av) * side;
if (a < 0)
a += 2 * PI;
/* TODO: a <= PI can probably fail because of representation error */
if (a <= PI && a > atol) {
na = (int)(a / atol);
atol2 = a / (na + 1) * side;
for (j = 0; j < na; j++) {
av += atol2;
nx = x[i + 1] + fabs(d) * cos(av);
ny = y[i + 1] + fabs(d) * sin(av);
Vect_append_point(nPoints, nx, ny, 0);
}
}
}
}
Vect_line_prune(nPoints);
}
/* clean_parallel - clean parallel line created by parallel_line:
** - looking for loops and if loop doesn't contain any other loop
** and centroid of loop is in buffer removes this loop (repeated)
** - optionally removes all end points in buffer
* parameters:
* Points - parallel line
* origPoints - original line
* d - offset
* rm_end - remove end points in buffer
** note1: on some lines (multiply selfcrossing; lines with end points
** in buffer of line other; some shapes of ends ) may create nosense
** note2: this function is stupid and slow, somebody more clever
** than I am should write paralle_line + clean_parallel
** better; RB March 2000
*/
static void clean_parallel(struct line_pnts *Points,
struct line_pnts *origPoints, double d, int rm_end)
{
int i, j, np, npn, sa, sb;
int sa_max = 0;
int first = 0, current, last, lcount;
double *x, *y, px, py, ix, iy;
static struct line_pnts *sPoints = NULL;
G_debug(4, "clean_parallel(): npoints = %d, d = %f, rm_end = %d",
Points->n_points, d, rm_end);
x = Points->x;
y = Points->y;
np = Points->n_points;
if (sPoints == NULL)
sPoints = Vect_new_line_struct();
Vect_reset_line(sPoints);
npn = 1;
/* remove loops */
while (first < np - 2) {
/* find first loop which doesn't contain any other loop */
current = first;
last = Points->n_points - 2;
lcount = 0;
while (find_cross
(Points, current, last - 1, current + 1, last, &sa,
&sb) != 0) {
if (lcount == 0) {
first = sa;
} /* move first forward */
current = sa + 1;
last = sb;
lcount++;
G_debug(5, " current = %d, last = %d, lcount = %d", current,
last, lcount);
}
if (lcount == 0) {
break;
} /* loop not found */
/* ensure sa is monotonically increasing, so npn doesn't reset low */
if (sa > sa_max)
sa_max = sa;
if (sa < sa_max)
break;
/* remove loop if in buffer */
if ((sb - sa) == 1) { /* neighbouring lines overlap */
j = sb + 1;
npn = sa + 1;
}
else {
Vect_reset_line(sPoints);
dig_find_intersection(x[sa], y[sa], x[sa + 1], y[sa + 1], x[sb],
y[sb], x[sb + 1], y[sb + 1], &ix, &iy);
Vect_append_point(sPoints, ix, iy, 0);
for (i = sa + 1; i < sb + 1; i++) { /* create loop polygon */
Vect_append_point(sPoints, x[i], y[i], 0);
}
Vect_find_poly_centroid(sPoints, &px, &py);
if (point_in_buf(origPoints, px, py, d)) { /* is loop in buffer ? */
npn = sa + 1;
x[npn] = ix;
y[npn] = iy;
j = sb + 1;
npn++;
if (lcount == 0) {
first = sb;
}
}
else { /* loop is not in buffer */
first = sb;
continue;
}
}
for (i = j; i < Points->n_points; i++) { /* move points down */
x[npn] = x[i];
y[npn] = y[i];
npn++;
}
Points->n_points = npn;
}
if (rm_end) {
/* remove points from start in buffer */
j = 0;
for (i = 0; i < Points->n_points - 1; i++) {
px = (x[i] + x[i + 1]) / 2;
py = (y[i] + y[i + 1]) / 2;
if (point_in_buf(origPoints, x[i], y[i], d * 0.9999)
&& point_in_buf(origPoints, px, py, d * 0.9999)) {
j++;
}
else {
break;
}
}
if (j > 0) {
npn = 0;
for (i = j; i < Points->n_points; i++) {
x[npn] = x[i];
y[npn] = y[i];
npn++;
}
Points->n_points = npn;
}
/* remove points from end in buffer */
j = 0;
for (i = Points->n_points - 1; i >= 1; i--) {
px = (x[i] + x[i - 1]) / 2;
py = (y[i] + y[i - 1]) / 2;
if (point_in_buf(origPoints, x[i], y[i], d * 0.9999)
&& point_in_buf(origPoints, px, py, d * 0.9999)) {
j++;
}
else {
break;
}
}
if (j > 0) {
Points->n_points -= j;
}
}
}
int close_streamvect(char *stream_vect)
{
int r, c, r_nbr, c_nbr, done;
GW_LARGE_INT i;
CELL stream_id, stream_nbr;
ASP_FLAG af;
int next_node;
struct sstack
{
int stream_id;
int next_trib;
} *nodestack;
int top = 0, stack_step = 1000;
int asp_r[9] = { 0, -1, -1, -1, 0, 1, 1, 1, 0 };
int asp_c[9] = { 0, 1, 0, -1, -1, -1, 0, 1, 1 };
struct Map_info Out;
static struct line_pnts *Points;
struct line_cats *Cats;
dbDriver *driver;
dbHandle handle;
dbString table_name, dbsql, valstr;
struct field_info *Fi;
char *cat_col_name = "cat", buf[2000];
struct Cell_head window;
double north_offset, west_offset, ns_res, ew_res;
int next_cat;
G_message(_("Writing vector map <%s>..."), stream_vect);
if (Vect_open_new(&Out, stream_vect, 0) < 0)
G_fatal_error(_("Unable to create vector map <%s>"), stream_vect);
nodestack = (struct sstack *)G_malloc(stack_step * sizeof(struct sstack));
Points = Vect_new_line_struct();
Cats = Vect_new_cats_struct();
G_get_set_window(&window);
ns_res = window.ns_res;
ew_res = window.ew_res;
north_offset = window.north - 0.5 * ns_res;
west_offset = window.west + 0.5 * ew_res;
next_cat = n_stream_nodes + 1;
for (i = 0; i < n_outlets; i++, next_cat++) {
G_percent(i, n_outlets, 2);
r = outlets[i].r;
c = outlets[i].c;
cseg_get(&stream, &stream_id, r, c);
if (!stream_id)
continue;
Vect_reset_line(Points);
Vect_reset_cats(Cats);
/* outlet */
Vect_cat_set(Cats, 1, stream_id);
Vect_cat_set(Cats, 2, 2);
Vect_append_point(Points, west_offset + c * ew_res,
north_offset - r * ns_res, 0);
Vect_write_line(&Out, GV_POINT, Points, Cats);
/* add root node to stack */
G_debug(3, "add root node");
top = 0;
nodestack[top].stream_id = stream_id;
nodestack[top].next_trib = 0;
/* depth first post order traversal */
G_debug(3, "traverse");
while (top >= 0) {
done = 1;
stream_id = nodestack[top].stream_id;
G_debug(3, "stream_id %d", stream_id);
if (nodestack[top].next_trib < stream_node[stream_id].n_trib) {
/* add to stack */
next_node =
stream_node[stream_id].trib[nodestack[top].next_trib];
G_debug(3, "add to stack: next %d, trib %d, n trib %d",
next_node, nodestack[top].next_trib,
stream_node[stream_id].n_trib);
nodestack[top].next_trib++;
top++;
if (top >= stack_step) {
/* need more space */
stack_step += 1000;
nodestack =
(struct sstack *)G_realloc(nodestack,
stack_step *
sizeof(struct sstack));
}
nodestack[top].next_trib = 0;
nodestack[top].stream_id = next_node;
done = 0;
G_debug(3, "go further down");
}
if (done) {
G_debug(3, "write stream segment");
Vect_reset_line(Points);
Vect_reset_cats(Cats);
r_nbr = stream_node[stream_id].r;
c_nbr = stream_node[stream_id].c;
cseg_get(&stream, &stream_nbr, r_nbr, c_nbr);
if (stream_nbr <= 0)
G_fatal_error(_("Stream id %d not set, top is %d, parent is %d"),
stream_id, top, nodestack[top - 1].stream_id);
Vect_cat_set(Cats, 1, stream_id);
if (stream_node[stream_id].n_trib == 0)
Vect_cat_set(Cats, 2, 0);
else
Vect_cat_set(Cats, 2, 1);
Vect_append_point(Points, west_offset + c_nbr * ew_res,
north_offset - r_nbr * ns_res, 0);
Vect_write_line(&Out, GV_POINT, Points, Cats);
seg_get(&aspflag, (char *)&af, r_nbr, c_nbr);
while (af.asp > 0) {
r_nbr = r_nbr + asp_r[(int)af.asp];
c_nbr = c_nbr + asp_c[(int)af.asp];
cseg_get(&stream, &stream_nbr, r_nbr, c_nbr);
if (stream_nbr <= 0)
G_fatal_error(_("Stream id not set while tracing"));
Vect_append_point(Points, west_offset + c_nbr * ew_res,
north_offset - r_nbr * ns_res, 0);
if (stream_nbr != stream_id) {
/* first point of parent stream */
break;
}
seg_get(&aspflag, (char *)&af, r_nbr, c_nbr);
}
Vect_write_line(&Out, GV_LINE, Points, Cats);
top--;
}
}
}
G_percent(n_outlets, n_outlets, 1); /* finish it */
G_message(_("Writing attribute data..."));
/* Prepeare strings for use in db_* calls */
db_init_string(&dbsql);
db_init_string(&valstr);
db_init_string(&table_name);
db_init_handle(&handle);
/* Preparing database for use */
/* Create database for new vector map */
Fi = Vect_default_field_info(&Out, 1, NULL, GV_1TABLE);
driver = db_start_driver_open_database(Fi->driver,
Vect_subst_var(Fi->database,
&Out));
if (driver == NULL) {
G_fatal_error(_("Unable to start driver <%s>"), Fi->driver);
}
db_set_error_handler_driver(driver);
G_debug(1, "table: %s", Fi->table);
G_debug(1, "driver: %s", Fi->driver);
G_debug(1, "database: %s", Fi->database);
sprintf(buf,
"create table %s (%s integer, stream_type varchar(20), type_code integer)",
Fi->table, cat_col_name);
db_set_string(&dbsql, buf);
if (db_execute_immediate(driver, &dbsql) != DB_OK) {
db_close_database(driver);
db_shutdown_driver(driver);
G_fatal_error(_("Unable to create table: '%s'"), db_get_string(&dbsql));
}
if (db_create_index2(driver, Fi->table, cat_col_name) != DB_OK)
G_warning(_("Unable to create index on table <%s>"), Fi->table);
if (db_grant_on_table(driver, Fi->table, DB_PRIV_SELECT,
DB_GROUP | DB_PUBLIC) != DB_OK)
G_fatal_error(_("Unable to grant privileges on table <%s>"), Fi->table);
db_begin_transaction(driver);
/* stream nodes */
for (i = 1; i <= n_stream_nodes; i++) {
sprintf(buf, "insert into %s values ( %lld, \'%s\', %d )",
Fi->table, i,
(stream_node[i].n_trib > 0 ? "intermediate" : "start"),
(stream_node[i].n_trib > 0));
db_set_string(&dbsql, buf);
if (db_execute_immediate(driver, &dbsql) != DB_OK) {
db_close_database(driver);
db_shutdown_driver(driver);
G_fatal_error(_("Unable to insert new row: '%s'"),
db_get_string(&dbsql));
}
}
db_commit_transaction(driver);
db_close_database_shutdown_driver(driver);
Vect_map_add_dblink(&Out, 1, NULL, Fi->table,
cat_col_name, Fi->database, Fi->driver);
G_debug(1, "close vector");
Vect_hist_command(&Out);
Vect_build(&Out);
Vect_close(&Out);
G_free(nodestack);
return 1;
}
void writePoint( struct Map_info* map, int type, QgsPoint point, struct line_cats *cats )
{
Vect_reset_line( line );
Vect_append_point( line, point.x(), point.y(), 0 );
Vect_write_line( map, type, line, cats );
}
int main(int argc, char *argv[])
{
int i, type, stat;
int day, yr, Out_proj;
int out_zone = 0;
int overwrite; /* overwrite output map */
const char *mapset;
const char *omap_name, *map_name, *iset_name, *iloc_name;
struct pj_info info_in;
struct pj_info info_out;
const char *gbase;
char date[40], mon[4];
struct GModule *module;
struct Option *omapopt, *mapopt, *isetopt, *ilocopt, *ibaseopt, *smax;
struct Key_Value *in_proj_keys, *in_unit_keys;
struct Key_Value *out_proj_keys, *out_unit_keys;
struct line_pnts *Points, *Points2;
struct line_cats *Cats;
struct Map_info Map;
struct Map_info Out_Map;
struct bound_box src_box, tgt_box;
int nowrap = 0, recommend_nowrap = 0;
double lmax;
struct
{
struct Flag *list; /* list files in source location */
struct Flag *transformz; /* treat z as ellipsoidal height */
struct Flag *wrap; /* latlon output: wrap to 0,360 */
struct Flag *no_topol; /* do not build topology */
} flag;
G_gisinit(argv[0]);
module = G_define_module();
G_add_keyword(_("vector"));
G_add_keyword(_("projection"));
G_add_keyword(_("transformation"));
G_add_keyword(_("import"));
module->description = _("Re-projects a vector map from one location to the current location.");
/* set up the options and flags for the command line parser */
ilocopt = G_define_standard_option(G_OPT_M_LOCATION);
ilocopt->required = YES;
ilocopt->label = _("Location containing input vector map");
ilocopt->guisection = _("Source");
isetopt = G_define_standard_option(G_OPT_M_MAPSET);
isetopt->label = _("Mapset containing input vector map");
isetopt->description = _("Default: name of current mapset");
isetopt->guisection = _("Source");
mapopt = G_define_standard_option(G_OPT_V_INPUT);
mapopt->required = NO;
mapopt->label = _("Name of input vector map to re-project");
mapopt->description = NULL;
mapopt->guisection = _("Source");
ibaseopt = G_define_standard_option(G_OPT_M_DBASE);
ibaseopt->label = _("Path to GRASS database of input location");
smax = G_define_option();
smax->key = "smax";
smax->type = TYPE_DOUBLE;
smax->required = NO;
smax->answer = "10000";
smax->label = _("Maximum segment length in meters in output vector map");
smax->description = _("Increases accuracy of reprojected shapes, disable with smax=0");
smax->guisection = _("Target");
omapopt = G_define_standard_option(G_OPT_V_OUTPUT);
omapopt->required = NO;
omapopt->description = _("Name for output vector map (default: input)");
omapopt->guisection = _("Target");
flag.list = G_define_flag();
flag.list->key = 'l';
flag.list->description = _("List vector maps in input mapset and exit");
flag.transformz = G_define_flag();
flag.transformz->key = 'z';
flag.transformz->description = _("3D vector maps only");
flag.transformz->label =
_("Assume z coordinate is ellipsoidal height and "
"transform if possible");
flag.transformz->guisection = _("Target");
flag.wrap = G_define_flag();
flag.wrap->key = 'w';
flag.wrap->description = _("Latlon output only, default is -180,180");
flag.wrap->label =
_("Disable wrapping to -180,180 for latlon output");
flag.transformz->guisection = _("Target");
flag.no_topol = G_define_flag();
flag.no_topol->key = 'b';
flag.no_topol->label = _("Do not build vector topology");
flag.no_topol->description = _("Recommended for massive point projection");
/* The parser checks if the map already exists in current mapset,
we switch out the check and do it
in the module after the parser */
overwrite = G_check_overwrite(argc, argv);
if (G_parser(argc, argv))
exit(EXIT_FAILURE);
/* start checking options and flags */
/* set input vector map name and mapset */
map_name = mapopt->answer;
if (omapopt->answer)
omap_name = omapopt->answer;
else
omap_name = map_name;
if (omap_name && !flag.list->answer && !overwrite &&
G_find_vector2(omap_name, G_mapset()))
G_fatal_error(_("option <%s>: <%s> exists. To overwrite, use the --overwrite flag"), omapopt->key,
omap_name);
if (isetopt->answer)
iset_name = isetopt->answer;
else
iset_name = G_store(G_mapset());
iloc_name = ilocopt->answer;
if (ibaseopt->answer)
gbase = ibaseopt->answer;
else
gbase = G_store(G_gisdbase());
if (!ibaseopt->answer && strcmp(iloc_name, G_location()) == 0)
G_fatal_error(_("Input and output locations can not be the same"));
lmax = atof(smax->answer);
if (lmax < 0)
lmax = 0;
Out_proj = G_projection();
if (Out_proj == PROJECTION_LL && flag.wrap->answer)
nowrap = 1;
G_begin_distance_calculations();
/* Change the location here and then come back */
select_target_env();
G_setenv_nogisrc("GISDBASE", gbase);
G_setenv_nogisrc("LOCATION_NAME", iloc_name);
stat = G_mapset_permissions(iset_name);
if (stat >= 0) { /* yes, we can access the mapset */
/* if requested, list the vector maps in source location - MN 5/2001 */
if (flag.list->answer) {
int i;
char **list;
G_verbose_message(_("Checking location <%s> mapset <%s>"),
iloc_name, iset_name);
list = G_list(G_ELEMENT_VECTOR, G_getenv_nofatal("GISDBASE"),
G_getenv_nofatal("LOCATION_NAME"), iset_name);
if (list[0]) {
for (i = 0; list[i]; i++) {
fprintf(stdout, "%s\n", list[i]);
}
fflush(stdout);
}
else {
G_important_message(_("No vector maps found"));
}
exit(EXIT_SUCCESS); /* leave v.proj after listing */
}
if (mapopt->answer == NULL) {
G_fatal_error(_("Required parameter <%s> not set"), mapopt->key);
}
G_setenv_nogisrc("MAPSET", iset_name);
/* Make sure map is available */
mapset = G_find_vector2(map_name, iset_name);
if (mapset == NULL)
G_fatal_error(_("Vector map <%s> in location <%s> mapset <%s> not found"),
map_name, iloc_name, iset_name);
/*** Get projection info for input mapset ***/
in_proj_keys = G_get_projinfo();
if (in_proj_keys == NULL)
exit(EXIT_FAILURE);
/* apparently the +over switch must be set in the input projection,
* not the output latlon projection */
if (Out_proj == PROJECTION_LL && nowrap == 1)
G_set_key_value("+over", "defined", in_proj_keys);
in_unit_keys = G_get_projunits();
if (in_unit_keys == NULL)
exit(EXIT_FAILURE);
if (pj_get_kv(&info_in, in_proj_keys, in_unit_keys) < 0)
exit(EXIT_FAILURE);
Vect_set_open_level(1);
G_debug(1, "Open old: location: %s mapset : %s", G_location_path(),
G_mapset());
if (Vect_open_old(&Map, map_name, mapset) < 0)
G_fatal_error(_("Unable to open vector map <%s>"), map_name);
}
else if (stat < 0)
{ /* allow 0 (i.e. denied permission) */
/* need to be able to read from others */
if (stat == 0)
G_fatal_error(_("Mapset <%s> in input location <%s> - permission denied"),
iset_name, iloc_name);
else
G_fatal_error(_("Mapset <%s> in input location <%s> not found"),
iset_name, iloc_name);
}
select_current_env();
/****** get the output projection parameters ******/
out_proj_keys = G_get_projinfo();
if (out_proj_keys == NULL)
exit(EXIT_FAILURE);
out_unit_keys = G_get_projunits();
if (out_unit_keys == NULL)
exit(EXIT_FAILURE);
if (pj_get_kv(&info_out, out_proj_keys, out_unit_keys) < 0)
exit(EXIT_FAILURE);
G_free_key_value(in_proj_keys);
G_free_key_value(in_unit_keys);
G_free_key_value(out_proj_keys);
G_free_key_value(out_unit_keys);
if (G_verbose() == G_verbose_max()) {
pj_print_proj_params(&info_in, &info_out);
}
/* Initialize the Point / Cat structure */
Points = Vect_new_line_struct();
Points2 = Vect_new_line_struct();
Cats = Vect_new_cats_struct();
/* test if latlon wrapping to -180,180 should be disabled */
if (Out_proj == PROJECTION_LL && nowrap == 0) {
int first = 1, counter = 0;
double x, y;
/* Cycle through all lines */
Vect_rewind(&Map);
while (1) {
type = Vect_read_next_line(&Map, Points, Cats); /* read line */
if (type == 0)
continue; /* Dead */
if (type == -1)
G_fatal_error(_("Reading input vector map"));
if (type == -2)
break;
if (first && Points->n_points > 0) {
first = 0;
src_box.E = src_box.W = Points->x[0];
src_box.N = src_box.S = Points->y[0];
src_box.T = src_box.B = Points->z[0];
}
for (i = 0; i < Points->n_points; i++) {
if (src_box.E < Points->x[i])
src_box.E = Points->x[i];
if (src_box.W > Points->x[i])
src_box.W = Points->x[i];
if (src_box.N < Points->y[i])
src_box.N = Points->y[i];
if (src_box.S > Points->y[i])
src_box.S = Points->y[i];
}
counter++;
}
if (counter == 0) {
G_warning(_("Input vector map <%s> is empty"), omap_name);
exit(EXIT_SUCCESS);
}
/* NW corner */
x = src_box.W;
y = src_box.N;
if (pj_do_transform(1, &x, &y, NULL,
&info_in, &info_out) < 0) {
G_fatal_error(_("Error in pj_do_transform"));
}
tgt_box.E = x;
tgt_box.W = x;
tgt_box.N = y;
tgt_box.S = y;
/* SW corner */
x = src_box.W;
y = src_box.S;
if (pj_do_transform(1, &x, &y, NULL,
&info_in, &info_out) < 0) {
G_fatal_error(_("Error in pj_do_transform"));
}
if (tgt_box.W > x)
tgt_box.W = x;
if (tgt_box.E < x)
tgt_box.E = x;
if (tgt_box.N < y)
tgt_box.N = y;
if (tgt_box.S > y)
tgt_box.S = y;
/* NE corner */
x = src_box.E;
y = src_box.N;
if (pj_do_transform(1, &x, &y, NULL,
&info_in, &info_out) < 0) {
G_fatal_error(_("Error in pj_do_transform"));
}
if (tgt_box.W > x) {
tgt_box.E = x + 360;
recommend_nowrap = 1;
}
if (tgt_box.N < y)
tgt_box.N = y;
if (tgt_box.S > y)
tgt_box.S = y;
/* SE corner */
x = src_box.E;
y = src_box.S;
if (pj_do_transform(1, &x, &y, NULL,
&info_in, &info_out) < 0) {
G_fatal_error(_("Error in pj_do_transform"));
}
if (tgt_box.W > x) {
if (tgt_box.E < x + 360)
tgt_box.E = x + 360;
recommend_nowrap = 1;
}
if (tgt_box.N < y)
tgt_box.N = y;
if (tgt_box.S > y)
tgt_box.S = y;
}
G_debug(1, "Open new: location: %s mapset : %s", G_location_path(),
G_mapset());
if (Vect_open_new(&Out_Map, omap_name, Vect_is_3d(&Map)) < 0)
G_fatal_error(_("Unable to create vector map <%s>"), omap_name);
Vect_set_error_handler_io(NULL, &Out_Map); /* register standard i/o error handler */
Vect_copy_head_data(&Map, &Out_Map);
Vect_hist_copy(&Map, &Out_Map);
Vect_hist_command(&Out_Map);
out_zone = info_out.zone;
Vect_set_zone(&Out_Map, out_zone);
/* Read and write header info */
sprintf(date, "%s", G_date());
sscanf(date, "%*s%s%d%*s%d", mon, &day, &yr);
if (yr < 2000)
yr = yr - 1900;
else
yr = yr - 2000;
sprintf(date, "%s %d %d", mon, day, yr);
Vect_set_date(&Out_Map, date);
/* line densification works only with vector topology */
if (Map.format != GV_FORMAT_NATIVE)
lmax = 0;
/* Cycle through all lines */
Vect_rewind(&Map);
i = 0;
G_message(_("Reprojecting primitives ..."));
while (TRUE) {
++i;
G_progress(i, 1e3);
type = Vect_read_next_line(&Map, Points, Cats); /* read line */
if (type == 0)
continue; /* Dead */
if (type == -1)
G_fatal_error(_("Reading input vector map"));
if (type == -2)
break;
Vect_line_prune(Points);
if (lmax > 0 && (type & GV_LINES) && Points->n_points > 1) {
double x1, y1, z1, x2, y2, z2;
double dx, dy, dz;
double l;
int i, n;
Vect_reset_line(Points2);
for (i = 0; i < Points->n_points - 1; i++) {
x1 = Points->x[i];
y1 = Points->y[i];
z1 = Points->z[i];
n = i + 1;
x2 = Points->x[n];
y2 = Points->y[n];
z2 = Points->z[n];
dx = x2 - x1;
dy = y2 - y1;
dz = z2 - z1;
if (pj_do_transform(1, &x1, &y1,
flag.transformz->answer ? &z1 : NULL,
&info_in, &info_out) < 0) {
G_fatal_error(_("Unable to re-project vector map <%s> from <%s>"),
Vect_get_full_name(&Map), ilocopt->answer);
}
if (pj_do_transform(1, &x2, &y2,
flag.transformz->answer ? &z2 : NULL,
&info_in, &info_out) < 0) {
G_fatal_error(_("Unable to re-project vector map <%s> from <%s>"),
Vect_get_full_name(&Map), ilocopt->answer);
}
Vect_append_point(Points2, x1, y1, z1);
l = G_distance(x1, y1, x2, y2);
if (l > lmax) {
int j;
double x, y, z;
x1 = Points->x[i];
y1 = Points->y[i];
z1 = Points->z[i];
n = ceil(l / lmax);
for (j = 1; j < n; j++) {
x = x1 + dx * j / n;
y = y1 + dy * j / n;
z = z1 + dz * j / n;
if (pj_do_transform(1, &x, &y,
flag.transformz->answer ? &z : NULL,
&info_in, &info_out) < 0) {
G_fatal_error(_("Unable to re-project vector map <%s> from <%s>"),
Vect_get_full_name(&Map), ilocopt->answer);
}
Vect_append_point(Points2, x, y, z);
}
}
}
Vect_append_point(Points2, x2, y2, z2);
Vect_write_line(&Out_Map, type, Points2, Cats); /* write line */
}
else {
if (pj_do_transform(Points->n_points, Points->x, Points->y,
flag.transformz->answer ? Points->z : NULL,
&info_in, &info_out) < 0) {
G_fatal_error(_("Unable to re-project vector map <%s> from <%s>"),
Vect_get_full_name(&Map), ilocopt->answer);
}
Vect_write_line(&Out_Map, type, Points, Cats); /* write line */
}
} /* end lines section */
G_progress(1, 1);
/* Copy tables */
if (Vect_copy_tables(&Map, &Out_Map, 0))
G_warning(_("Failed to copy attribute table to output map"));
Vect_close(&Map);
if (!flag.no_topol->answer)
Vect_build(&Out_Map);
Vect_close(&Out_Map);
if (recommend_nowrap)
G_important_message(_("Try to disable wrapping to -180,180 "
"if topological errors occurred"));
exit(EXIT_SUCCESS);
}
int area_area(struct Map_info *In, int *field, struct Map_info *Tmp,
struct Map_info *Out, struct field_info *Fi,
dbDriver * driver, int operator, int *ofield,
ATTRIBUTES * attr, struct ilist *BList, double snap)
{
int ret, input, line, nlines, area, nareas;
int in_area, in_centr, out_cat;
struct line_pnts *Points;
struct line_cats *Cats;
CENTR *Centr;
char buf[1000];
dbString stmt;
int nmodif;
int verbose;
verbose = G_verbose();
Points = Vect_new_line_struct();
Cats = Vect_new_cats_struct();
/* optional snap */
if (snap > 0) {
int i, j, snapped_lines = 0;
struct bound_box box;
struct boxlist *boxlist = Vect_new_boxlist(0);
struct ilist *reflist = Vect_new_list();
G_message(_("Snapping boundaries with %g ..."), snap);
/* snap boundaries in B to boundaries in A,
* not modifying boundaries in A */
if (BList->n_values > 1)
qsort(BList->value, BList->n_values, sizeof(int), cmp_int);
snapped_lines = 0;
nlines = BList->n_values;
for (i = 0; i < nlines; i++) {
line = BList->value[i];
Vect_read_line(Tmp, Points, Cats, line);
/* select lines by box */
Vect_get_line_box(Tmp, line, &box);
box.E += snap;
box.W -= snap;
box.N += snap;
box.S -= snap;
box.T = 0.0;
box.B = 0.0;
Vect_select_lines_by_box(Tmp, &box, GV_BOUNDARY, boxlist);
if (boxlist->n_values > 0) {
Vect_reset_list(reflist);
for (j = 0; j < boxlist->n_values; j++) {
int aline = boxlist->id[j];
if (!bsearch(&aline, BList->value, BList->n_values,
sizeof(int), cmp_int)) {
G_ilist_add(reflist, aline);
}
}
/* snap bline to alines */
if (Vect_snap_line(Tmp, reflist, Points, snap, 0, NULL, NULL)) {
/* rewrite bline*/
Vect_delete_line(Tmp, line);
ret = Vect_write_line(Tmp, GV_BOUNDARY, Points, Cats);
G_ilist_add(BList, ret);
snapped_lines++;
G_debug(3, "line %d snapped", line);
}
}
}
Vect_destroy_boxlist(boxlist);
Vect_destroy_list(reflist);
G_verbose_message(n_("%d boundary snapped",
"%d boundaries snapped",
snapped_lines), snapped_lines);
}
/* same procedure like for v.in.ogr:
* Vect_clean_small_angles_at_nodes() can change the geometry so that new intersections
* are created. We must call Vect_break_lines(), Vect_remove_duplicates()
* and Vect_clean_small_angles_at_nodes() until no more small dangles are found */
do {
G_message(_("Breaking lines..."));
Vect_break_lines_list(Tmp, NULL, BList, GV_BOUNDARY, NULL);
/* Probably not necessary for LINE x AREA */
G_message(_("Removing duplicates..."));
Vect_remove_duplicates(Tmp, GV_BOUNDARY, NULL);
G_message(_("Cleaning boundaries at nodes..."));
nmodif =
Vect_clean_small_angles_at_nodes(Tmp, GV_BOUNDARY, NULL);
} while (nmodif > 0);
/* ?: May be result of Vect_break_lines() + Vect_remove_duplicates() any dangle or bridge?
* In that case, calls to Vect_remove_dangles() and Vect_remove_bridges() would be also necessary */
G_set_verbose(0);
/* should be fast, be silent */
Vect_build_partial(Tmp, GV_BUILD_AREAS);
G_set_verbose(verbose);
nlines = Vect_get_num_lines(Tmp);
ret = 0;
for (line = 1; line <= nlines; line++) {
if (!Vect_line_alive(Tmp, line))
continue;
if (Vect_get_line_type(Tmp, line) == GV_BOUNDARY) {
int left, rite;
Vect_get_line_areas(Tmp, line, &left, &rite);
if (left == 0 || rite == 0) {
/* invalid boundary */
ret = 1;
break;
}
}
}
if (ret) {
Vect_remove_dangles(Tmp, GV_BOUNDARY, -1, NULL);
Vect_remove_bridges(Tmp, NULL, NULL, NULL);
}
G_set_verbose(0);
Vect_build_partial(Tmp, GV_BUILD_NONE);
Vect_build_partial(Tmp, GV_BUILD_BASE);
G_set_verbose(verbose);
G_message(_("Merging lines..."));
Vect_merge_lines(Tmp, GV_BOUNDARY, NULL, NULL);
/* Attach islands */
G_message(_("Attaching islands..."));
/* can take some time, show messages */
Vect_build_partial(Tmp, GV_BUILD_ATTACH_ISLES);
/* Calculate new centroids for all areas */
nareas = Vect_get_num_areas(Tmp);
Centr = (CENTR *) G_malloc((nareas + 1) * sizeof(CENTR)); /* index from 1 ! */
for (area = 1; area <= nareas; area++) {
ret =
Vect_get_point_in_area(Tmp, area, &(Centr[area].x),
&(Centr[area].y));
if (ret < 0) {
G_warning(_("Cannot calculate area centroid"));
Centr[area].valid = 0;
}
else {
Centr[area].valid = 1;
}
}
/* Query input maps */
for (input = 0; input < 2; input++) {
G_message(_("Querying vector map <%s>..."),
Vect_get_full_name(&(In[input])));
for (area = 1; area <= nareas; area++) {
Centr[area].cat[input] = Vect_new_cats_struct();
G_percent(area, nareas, 1);
in_area =
Vect_find_area(&(In[input]), Centr[area].x, Centr[area].y);
if (in_area > 0) {
in_centr = Vect_get_area_centroid(&(In[input]), in_area);
if (in_centr > 0) {
int i;
Vect_read_line(&(In[input]), NULL, Cats, in_centr);
/* Add all cats with original field number */
for (i = 0; i < Cats->n_cats; i++) {
if (Cats->field[i] == field[input]) {
ATTR *at;
Vect_cat_set(Centr[area].cat[input], ofield[input + 1],
Cats->cat[i]);
/* Mark as used */
at = find_attr(&(attr[input]), Cats->cat[i]);
if (!at)
G_fatal_error(_("Attribute not found"));
at->used = 1;
}
}
}
}
}
}
G_message(_("Writing centroids..."));
db_init_string(&stmt);
out_cat = 1;
for (area = 1; area <= nareas; area++) {
int i;
G_percent(area, nareas, 1);
/* check the condition */
switch (operator) {
case OP_AND:
if (!
(Centr[area].cat[0]->n_cats > 0 &&
Centr[area].cat[1]->n_cats > 0))
continue;
break;
case OP_OR:
if (!
(Centr[area].cat[0]->n_cats > 0 ||
Centr[area].cat[1]->n_cats > 0))
continue;
break;
case OP_NOT:
if (!
(Centr[area].cat[0]->n_cats > 0 &&
!(Centr[area].cat[1]->n_cats > 0)))
continue;
break;
case OP_XOR:
if ((Centr[area].cat[0]->n_cats > 0 &&
Centr[area].cat[1]->n_cats > 0) ||
(!(Centr[area].cat[0]->n_cats > 0) &&
!(Centr[area].cat[1]->n_cats > 0)))
continue;
break;
}
Vect_reset_line(Points);
Vect_reset_cats(Cats);
Vect_append_point(Points, Centr[area].x, Centr[area].y, 0.0);
if (ofield[0] > 0) {
/* Add new cats for all combinations of input cats (-1 in cycle for null) */
for (i = -1; i < Centr[area].cat[0]->n_cats; i++) {
int j;
if (i == -1 && Centr[area].cat[0]->n_cats > 0)
continue; /* no need to make null */
for (j = -1; j < Centr[area].cat[1]->n_cats; j++) {
if (j == -1 && Centr[area].cat[1]->n_cats > 0)
continue; /* no need to make null */
if (ofield[0] > 0)
Vect_cat_set(Cats, ofield[0], out_cat);
/* attributes */
if (driver) {
ATTR *at;
sprintf(buf, "insert into %s values ( %d", Fi->table,
out_cat);
db_set_string(&stmt, buf);
/* cata */
if (i >= 0) {
if (attr[0].columns) {
at = find_attr(&(attr[0]),
Centr[area].cat[0]->cat[i]);
if (!at)
G_fatal_error(_("Attribute not found"));
if (at->values)
db_append_string(&stmt, at->values);
else
db_append_string(&stmt, attr[0].null_values);
}
else {
sprintf(buf, ", %d", Centr[area].cat[0]->cat[i]);
db_append_string(&stmt, buf);
}
}
else {
if (attr[0].columns) {
db_append_string(&stmt, attr[0].null_values);
}
else {
sprintf(buf, ", null");
db_append_string(&stmt, buf);
}
}
/* catb */
if (j >= 0) {
if (attr[1].columns) {
at = find_attr(&(attr[1]),
Centr[area].cat[1]->cat[j]);
if (!at)
G_fatal_error(_("Attribute not found"));
if (at->values)
db_append_string(&stmt, at->values);
else
db_append_string(&stmt, attr[1].null_values);
}
else {
sprintf(buf, ", %d", Centr[area].cat[1]->cat[j]);
db_append_string(&stmt, buf);
}
}
else {
if (attr[1].columns) {
db_append_string(&stmt, attr[1].null_values);
}
else {
sprintf(buf, ", null");
db_append_string(&stmt, buf);
}
}
db_append_string(&stmt, " )");
G_debug(3, "%s", db_get_string(&stmt));
if (db_execute_immediate(driver, &stmt) != DB_OK)
G_warning(_("Unable to insert new record: '%s'"),
db_get_string(&stmt));
}
out_cat++;
}
}
}
/* Add all cats from input vectors */
if (ofield[1] > 0 && field[0] > 0) {
for (i = 0; i < Centr[area].cat[0]->n_cats; i++) {
if (Centr[area].cat[0]->field[i] == field[0])
Vect_cat_set(Cats, ofield[1], Centr[area].cat[0]->cat[i]);
}
}
if (ofield[2] > 0 && field[1] > 0 && ofield[1] != ofield[2]) {
for (i = 0; i < Centr[area].cat[1]->n_cats; i++) {
if (Centr[area].cat[1]->field[i] == field[1])
Vect_cat_set(Cats, ofield[2], Centr[area].cat[1]->cat[i]);
}
}
Vect_write_line(Tmp, GV_CENTROID, Points, Cats);
Vect_write_line(Out, GV_CENTROID, Points, Cats);
}
G_set_verbose(0);
/* should be fast, be silent */
Vect_build_partial(Tmp, GV_BUILD_CENTROIDS);
G_set_verbose(verbose);
/* Copy valid boundaries to final output */
nlines = Vect_get_num_lines(Tmp);
for (line = 1; line <= nlines; line++) {
int i, ltype, side[2], centr[2];
G_percent(line, nlines, 1); /* must be before any continue */
if (!Vect_line_alive(Tmp, line))
continue;
ltype = Vect_read_line(Tmp, Points, Cats, line);
if (!(ltype & GV_BOUNDARY))
continue;
Vect_get_line_areas(Tmp, line, &side[0], &side[1]);
for (i = 0; i < 2; i++) {
if (side[i] == 0) { /* This should not happen ! */
centr[i] = 0;
continue;
}
if (side[i] > 0) {
area = side[i];
}
else { /* island */
area = Vect_get_isle_area(Tmp, abs(side[i]));
}
if (area > 0)
centr[i] = Vect_get_area_centroid(Tmp, area);
else
centr[i] = 0;
}
if (centr[0] || centr[1])
Vect_write_line(Out, GV_BOUNDARY, Points, Cats);
}
return 0;
}
int main(int argc, char *argv[])
{
struct GModule *module;
struct _param {
struct Option *dsn, *out, *layer, *spat, *where,
*min_area;
struct Option *snap, *type, *outloc, *cnames;
} param;
struct _flag {
struct Flag *list, *tlist, *no_clean, *z, *notab,
*region;
struct Flag *over, *extend, *formats, *tolower, *no_import;
} flag;
int i, j, layer, arg_s_num, nogeom, ncnames;
float xmin, ymin, xmax, ymax;
int ncols = 0, type;
double min_area, snap;
char buf[2000], namebuf[2000], tempvect[GNAME_MAX];
char *separator;
struct Key_Value *loc_proj_info, *loc_proj_units;
struct Key_Value *proj_info, *proj_units;
struct Cell_head cellhd, loc_wind, cur_wind;
char error_msg[8192];
/* Vector */
struct Map_info Map, Tmp, *Out;
int cat;
/* Attributes */
struct field_info *Fi;
dbDriver *driver;
dbString sql, strval;
int dim, with_z;
/* OGR */
OGRDataSourceH Ogr_ds;
OGRLayerH Ogr_layer;
OGRFieldDefnH Ogr_field;
char *Ogr_fieldname;
OGRFieldType Ogr_ftype;
OGRFeatureH Ogr_feature;
OGRFeatureDefnH Ogr_featuredefn;
OGRGeometryH Ogr_geometry, Ogr_oRing, poSpatialFilter;
OGRSpatialReferenceH Ogr_projection;
OGREnvelope oExt;
OGRwkbGeometryType Ogr_geom_type;
int OFTIntegerListlength;
char *output;
char **layer_names; /* names of layers to be imported */
int *layers; /* layer indexes */
int nlayers; /* number of layers to import */
char **available_layer_names; /* names of layers to be imported */
int navailable_layers;
int layer_id;
unsigned int n_features, feature_count;
int overwrite;
double area_size;
int use_tmp_vect;
xmin = ymin = xmax = ymax = 0.0;
loc_proj_info = loc_proj_units = NULL;
Ogr_ds = Ogr_oRing = poSpatialFilter = NULL;
OFTIntegerListlength = 40; /* hack due to limitation in OGR */
area_size = 0.0;
use_tmp_vect = FALSE;
G_gisinit(argv[0]);
module = G_define_module();
G_add_keyword(_("vector"));
G_add_keyword(_("import"));
module->description = _("Converts vector data into a GRASS vector map using OGR library.");
param.dsn = G_define_option();
param.dsn->key = "dsn";
param.dsn->type = TYPE_STRING;
param.dsn->required =YES;
param.dsn->label = _("OGR datasource name");
param.dsn->description = _("Examples:\n"
"\t\tESRI Shapefile: directory containing shapefiles\n"
"\t\tMapInfo File: directory containing mapinfo files");
param.layer = G_define_option();
param.layer->key = "layer";
param.layer->type = TYPE_STRING;
param.layer->required = NO;
param.layer->multiple = YES;
param.layer->label =
_("OGR layer name. If not given, all available layers are imported");
param.layer->description =
_("Examples:\n" "\t\tESRI Shapefile: shapefile name\n"
"\t\tMapInfo File: mapinfo file name");
param.layer->guisection = _("Selection");
param.out = G_define_standard_option(G_OPT_V_OUTPUT);
param.out->required = NO;
param.out->guisection = _("Output");
param.spat = G_define_option();
param.spat->key = "spatial";
param.spat->type = TYPE_DOUBLE;
param.spat->multiple = YES;
param.spat->required = NO;
param.spat->key_desc = "xmin,ymin,xmax,ymax";
param.spat->label = _("Import subregion only");
param.spat->guisection = _("Selection");
param.spat->description =
_("Format: xmin,ymin,xmax,ymax - usually W,S,E,N");
param.where = G_define_standard_option(G_OPT_DB_WHERE);
param.where->guisection = _("Selection");
param.min_area = G_define_option();
param.min_area->key = "min_area";
param.min_area->type = TYPE_DOUBLE;
param.min_area->required = NO;
param.min_area->answer = "0.0001";
param.min_area->label =
_("Minimum size of area to be imported (square units)");
param.min_area->guisection = _("Selection");
param.min_area->description = _("Smaller areas and "
"islands are ignored. Should be greater than snap^2");
param.type = G_define_standard_option(G_OPT_V_TYPE);
param.type->options = "point,line,boundary,centroid";
param.type->answer = "";
param.type->description = _("Optionally change default input type");
param.type->descriptions =
_("point;import area centroids as points;"
"line;import area boundaries as lines;"
"boundary;import lines as area boundaries;"
"centroid;import points as centroids");
param.type->guisection = _("Selection");
param.snap = G_define_option();
param.snap->key = "snap";
param.snap->type = TYPE_DOUBLE;
param.snap->required = NO;
param.snap->answer = "-1";
param.snap->label = _("Snapping threshold for boundaries");
param.snap->description = _("'-1' for no snap");
param.outloc = G_define_option();
param.outloc->key = "location";
param.outloc->type = TYPE_STRING;
param.outloc->required = NO;
param.outloc->description = _("Name for new location to create");
param.outloc->key_desc = "name";
param.cnames = G_define_option();
param.cnames->key = "cnames";
param.cnames->type = TYPE_STRING;
param.cnames->required = NO;
param.cnames->multiple = YES;
param.cnames->description =
_("List of column names to be used instead of original names, "
"first is used for category column");
param.cnames->guisection = _("Attributes");
flag.list = G_define_flag();
flag.list->key = 'l';
flag.list->description = _("List available OGR layers in data source and exit");
flag.list->suppress_required = YES;
flag.list->guisection = _("Print");
flag.tlist = G_define_flag();
flag.tlist->key = 'a';
flag.tlist->description = _("List available OGR layers including feature types "
"in data source and exit");
flag.tlist->suppress_required = YES;
flag.tlist->guisection = _("Print");
flag.formats = G_define_flag();
flag.formats->key = 'f';
flag.formats->description = _("List supported formats and exit");
flag.formats->suppress_required = YES;
flag.formats->guisection = _("Print");
/* if using -c, you lose topological information ! */
flag.no_clean = G_define_flag();
flag.no_clean->key = 'c';
flag.no_clean->description = _("Do not clean polygons (not recommended)");
flag.no_clean->guisection = _("Output");
flag.z = G_define_flag();
flag.z->key = 'z';
flag.z->description = _("Create 3D output");
flag.z->guisection = _("Output");
flag.notab = G_define_flag();
flag.notab->key = 't';
flag.notab->description = _("Do not create attribute table");
flag.notab->guisection = _("Attributes");
flag.over = G_define_flag();
flag.over->key = 'o';
flag.over->description =
_("Override dataset projection (use location's projection)");
flag.region = G_define_flag();
flag.region->key = 'r';
flag.region->guisection = _("Selection");
flag.region->description = _("Limit import to the current region");
flag.extend = G_define_flag();
flag.extend->key = 'e';
flag.extend->description =
_("Extend location extents based on new dataset");
flag.tolower = G_define_flag();
flag.tolower->key = 'w';
flag.tolower->description =
_("Change column names to lowercase characters");
flag.tolower->guisection = _("Attributes");
flag.no_import = G_define_flag();
flag.no_import->key = 'i';
flag.no_import->description =
_("Create the location specified by the \"location\" parameter and exit."
" Do not import the vector data.");
/* The parser checks if the map already exists in current mapset, this is
* wrong if location options is used, so we switch out the check and do it
* in the module after the parser */
overwrite = G_check_overwrite(argc, argv);
if (G_parser(argc, argv))
exit(EXIT_FAILURE);
G_begin_polygon_area_calculations(); /* Used in geom() */
OGRRegisterAll();
/* list supported formats */
if (flag.formats->answer) {
int iDriver;
G_message(_("Available OGR Drivers:"));
for (iDriver = 0; iDriver < OGRGetDriverCount(); iDriver++) {
OGRSFDriverH poDriver = OGRGetDriver(iDriver);
const char *pszRWFlag;
if (OGR_Dr_TestCapability(poDriver, ODrCCreateDataSource))
pszRWFlag = "rw";
else
pszRWFlag = "ro";
fprintf(stdout, " %s (%s): %s\n",
OGR_Dr_GetName(poDriver),
pszRWFlag, OGR_Dr_GetName(poDriver));
}
exit(EXIT_SUCCESS);
}
if (param.dsn->answer == NULL) {
G_fatal_error(_("Required parameter <%s> not set"), param.dsn->key);
}
min_area = atof(param.min_area->answer);
snap = atof(param.snap->answer);
type = Vect_option_to_types(param.type);
ncnames = 0;
if (param.cnames->answers) {
i = 0;
while (param.cnames->answers[i++]) {
ncnames++;
}
}
/* Open OGR DSN */
Ogr_ds = NULL;
if (strlen(param.dsn->answer) > 0)
Ogr_ds = OGROpen(param.dsn->answer, FALSE, NULL);
if (Ogr_ds == NULL)
G_fatal_error(_("Unable to open data source <%s>"), param.dsn->answer);
/* Make a list of available layers */
navailable_layers = OGR_DS_GetLayerCount(Ogr_ds);
available_layer_names =
(char **)G_malloc(navailable_layers * sizeof(char *));
if (flag.list->answer || flag.tlist->answer)
G_message(_("Data source <%s> (format '%s') contains %d layers:"),
param.dsn->answer,
OGR_Dr_GetName(OGR_DS_GetDriver(Ogr_ds)), navailable_layers);
for (i = 0; i < navailable_layers; i++) {
Ogr_layer = OGR_DS_GetLayer(Ogr_ds, i);
Ogr_featuredefn = OGR_L_GetLayerDefn(Ogr_layer);
Ogr_geom_type = OGR_FD_GetGeomType(Ogr_featuredefn);
available_layer_names[i] =
G_store((char *)OGR_FD_GetName(Ogr_featuredefn));
if (flag.tlist->answer)
fprintf(stdout, "%s (%s)\n", available_layer_names[i],
OGRGeometryTypeToName(Ogr_geom_type));
else if (flag.list->answer)
fprintf(stdout, "%s\n", available_layer_names[i]);
}
if (flag.list->answer || flag.tlist->answer) {
fflush(stdout);
exit(EXIT_SUCCESS);
}
/* Make a list of layers to be imported */
if (param.layer->answer) { /* From option */
nlayers = 0;
while (param.layer->answers[nlayers])
nlayers++;
layer_names = (char **)G_malloc(nlayers * sizeof(char *));
layers = (int *)G_malloc(nlayers * sizeof(int));
for (i = 0; i < nlayers; i++) {
layer_names[i] = G_store(param.layer->answers[i]);
/* Find it in the source */
layers[i] = -1;
for (j = 0; j < navailable_layers; j++) {
if (strcmp(available_layer_names[j], layer_names[i]) == 0) {
layers[i] = j;
break;
}
}
if (layers[i] == -1)
G_fatal_error(_("Layer <%s> not available"), layer_names[i]);
}
}
else { /* use list of all layers */
nlayers = navailable_layers;
layer_names = available_layer_names;
layers = (int *)G_malloc(nlayers * sizeof(int));
for (i = 0; i < nlayers; i++)
layers[i] = i;
}
if (param.out->answer) {
output = G_store(param.out->answer);
}
else {
if (nlayers < 1)
G_fatal_error(_("No OGR layers available"));
output = G_store(layer_names[0]);
G_message(_("All available OGR layers will be imported into vector map <%s>"), output);
}
if (!param.outloc->answer) { /* Check if the map exists */
if (G_find_vector2(output, G_mapset()) && !overwrite)
G_fatal_error(_("Vector map <%s> already exists"),
output);
}
/* Get first imported layer to use for extents and projection check */
Ogr_layer = OGR_DS_GetLayer(Ogr_ds, layers[0]);
if (flag.region->answer) {
if (param.spat->answer)
G_fatal_error(_("Select either the current region flag or the spatial option, not both"));
G_get_window(&cur_wind);
xmin = cur_wind.west;
xmax = cur_wind.east;
ymin = cur_wind.south;
ymax = cur_wind.north;
}
if (param.spat->answer) {
/* See as reference: gdal/ogr/ogr_capi_test.c */
/* cut out a piece of the map */
/* order: xmin,ymin,xmax,ymax */
arg_s_num = 0;
i = 0;
while (param.spat->answers[i]) {
if (i == 0)
xmin = atof(param.spat->answers[i]);
if (i == 1)
ymin = atof(param.spat->answers[i]);
if (i == 2)
xmax = atof(param.spat->answers[i]);
if (i == 3)
ymax = atof(param.spat->answers[i]);
arg_s_num++;
i++;
}
if (arg_s_num != 4)
G_fatal_error(_("4 parameters required for 'spatial' parameter"));
}
if (param.spat->answer || flag.region->answer) {
G_debug(2, "cut out with boundaries: xmin:%f ymin:%f xmax:%f ymax:%f",
xmin, ymin, xmax, ymax);
/* in theory this could be an irregular polygon */
poSpatialFilter = OGR_G_CreateGeometry(wkbPolygon);
Ogr_oRing = OGR_G_CreateGeometry(wkbLinearRing);
OGR_G_AddPoint(Ogr_oRing, xmin, ymin, 0.0);
OGR_G_AddPoint(Ogr_oRing, xmin, ymax, 0.0);
OGR_G_AddPoint(Ogr_oRing, xmax, ymax, 0.0);
OGR_G_AddPoint(Ogr_oRing, xmax, ymin, 0.0);
OGR_G_AddPoint(Ogr_oRing, xmin, ymin, 0.0);
OGR_G_AddGeometryDirectly(poSpatialFilter, Ogr_oRing);
OGR_L_SetSpatialFilter(Ogr_layer, poSpatialFilter);
}
if (param.where->answer) {
/* select by attribute */
OGR_L_SetAttributeFilter(Ogr_layer, param.where->answer);
}
/* fetch boundaries */
if ((OGR_L_GetExtent(Ogr_layer, &oExt, 1)) == OGRERR_NONE) {
G_get_window(&cellhd);
cellhd.north = oExt.MaxY;
cellhd.south = oExt.MinY;
cellhd.west = oExt.MinX;
cellhd.east = oExt.MaxX;
cellhd.rows = 20; /* TODO - calculate useful values */
cellhd.cols = 20;
cellhd.ns_res = (cellhd.north - cellhd.south) / cellhd.rows;
cellhd.ew_res = (cellhd.east - cellhd.west) / cellhd.cols;
}
else {
cellhd.north = 1.;
cellhd.south = 0.;
cellhd.west = 0.;
cellhd.east = 1.;
cellhd.top = 1.;
cellhd.bottom = 1.;
cellhd.rows = 1;
cellhd.rows3 = 1;
cellhd.cols = 1;
cellhd.cols3 = 1;
cellhd.depths = 1;
cellhd.ns_res = 1.;
cellhd.ns_res3 = 1.;
cellhd.ew_res = 1.;
cellhd.ew_res3 = 1.;
cellhd.tb_res = 1.;
}
/* suppress boundary splitting ? */
if (flag.no_clean->answer) {
split_distance = -1.;
}
else {
split_distance = 0.;
area_size =
sqrt((cellhd.east - cellhd.west) * (cellhd.north - cellhd.south));
}
/* Fetch input map projection in GRASS form. */
proj_info = NULL;
proj_units = NULL;
Ogr_projection = OGR_L_GetSpatialRef(Ogr_layer); /* should not be freed later */
/* Do we need to create a new location? */
if (param.outloc->answer != NULL) {
/* Convert projection information non-interactively as we can't
* assume the user has a terminal open */
if (GPJ_osr_to_grass(&cellhd, &proj_info,
&proj_units, Ogr_projection, 0) < 0) {
G_fatal_error(_("Unable to convert input map projection to GRASS "
"format; cannot create new location."));
}
else {
G_make_location(param.outloc->answer, &cellhd,
proj_info, proj_units, NULL);
G_message(_("Location <%s> created"), param.outloc->answer);
}
/* If the i flag is set, clean up? and exit here */
if(flag.no_import->answer)
{
exit(EXIT_SUCCESS);
}
}
else {
int err = 0;
/* Projection only required for checking so convert non-interactively */
if (GPJ_osr_to_grass(&cellhd, &proj_info,
&proj_units, Ogr_projection, 0) < 0)
G_warning(_("Unable to convert input map projection information to "
"GRASS format for checking"));
/* Does the projection of the current location match the dataset? */
/* G_get_window seems to be unreliable if the location has been changed */
G__get_window(&loc_wind, "", "DEFAULT_WIND", "PERMANENT");
/* fetch LOCATION PROJ info */
if (loc_wind.proj != PROJECTION_XY) {
loc_proj_info = G_get_projinfo();
loc_proj_units = G_get_projunits();
}
if (flag.over->answer) {
cellhd.proj = loc_wind.proj;
cellhd.zone = loc_wind.zone;
G_message(_("Over-riding projection check"));
}
else if (loc_wind.proj != cellhd.proj
|| (err =
G_compare_projections(loc_proj_info, loc_proj_units,
proj_info, proj_units)) != TRUE) {
int i_value;
strcpy(error_msg,
_("Projection of dataset does not"
" appear to match current location.\n\n"));
/* TODO: output this info sorted by key: */
if (loc_wind.proj != cellhd.proj || err != -2) {
if (loc_proj_info != NULL) {
strcat(error_msg, _("GRASS LOCATION PROJ_INFO is:\n"));
for (i_value = 0; i_value < loc_proj_info->nitems;
i_value++)
sprintf(error_msg + strlen(error_msg), "%s: %s\n",
loc_proj_info->key[i_value],
loc_proj_info->value[i_value]);
strcat(error_msg, "\n");
}
if (proj_info != NULL) {
strcat(error_msg, _("Import dataset PROJ_INFO is:\n"));
for (i_value = 0; i_value < proj_info->nitems; i_value++)
sprintf(error_msg + strlen(error_msg), "%s: %s\n",
proj_info->key[i_value],
proj_info->value[i_value]);
}
else {
strcat(error_msg, _("Import dataset PROJ_INFO is:\n"));
if (cellhd.proj == PROJECTION_XY)
sprintf(error_msg + strlen(error_msg),
"Dataset proj = %d (unreferenced/unknown)\n",
cellhd.proj);
else if (cellhd.proj == PROJECTION_LL)
sprintf(error_msg + strlen(error_msg),
"Dataset proj = %d (lat/long)\n",
cellhd.proj);
else if (cellhd.proj == PROJECTION_UTM)
sprintf(error_msg + strlen(error_msg),
"Dataset proj = %d (UTM), zone = %d\n",
cellhd.proj, cellhd.zone);
else if (cellhd.proj == PROJECTION_SP)
sprintf(error_msg + strlen(error_msg),
"Dataset proj = %d (State Plane), zone = %d\n",
cellhd.proj, cellhd.zone);
else
sprintf(error_msg + strlen(error_msg),
"Dataset proj = %d (unknown), zone = %d\n",
cellhd.proj, cellhd.zone);
}
}
else {
if (loc_proj_units != NULL) {
strcat(error_msg, "GRASS LOCATION PROJ_UNITS is:\n");
for (i_value = 0; i_value < loc_proj_units->nitems;
i_value++)
sprintf(error_msg + strlen(error_msg), "%s: %s\n",
loc_proj_units->key[i_value],
loc_proj_units->value[i_value]);
strcat(error_msg, "\n");
}
if (proj_units != NULL) {
strcat(error_msg, "Import dataset PROJ_UNITS is:\n");
for (i_value = 0; i_value < proj_units->nitems; i_value++)
sprintf(error_msg + strlen(error_msg), "%s: %s\n",
proj_units->key[i_value],
proj_units->value[i_value]);
}
}
sprintf(error_msg + strlen(error_msg),
_("\nYou can use the -o flag to %s to override this projection check.\n"),
G_program_name());
strcat(error_msg,
_("Consider generating a new location with 'location' parameter"
" from input data set.\n"));
G_fatal_error(error_msg);
}
else {
G_message(_("Projection of input dataset and current location "
"appear to match"));
}
}
db_init_string(&sql);
db_init_string(&strval);
/* open output vector */
/* strip any @mapset from vector output name */
G_find_vector(output, G_mapset());
Vect_open_new(&Map, output, flag.z->answer != 0);
Out = ⤅
n_polygon_boundaries = 0;
if (!flag.no_clean->answer) {
/* check if we need a tmp vector */
/* estimate distance for boundary splitting --> */
for (layer = 0; layer < nlayers; layer++) {
layer_id = layers[layer];
Ogr_layer = OGR_DS_GetLayer(Ogr_ds, layer_id);
Ogr_featuredefn = OGR_L_GetLayerDefn(Ogr_layer);
n_features = feature_count = 0;
n_features = OGR_L_GetFeatureCount(Ogr_layer, 1);
OGR_L_ResetReading(Ogr_layer);
/* count polygons and isles */
G_message(_("Counting polygons for %d features (OGR layer <%s>)..."),
n_features, layer_names[layer]);
while ((Ogr_feature = OGR_L_GetNextFeature(Ogr_layer)) != NULL) {
G_percent(feature_count++, n_features, 1); /* show something happens */
/* Geometry */
Ogr_geometry = OGR_F_GetGeometryRef(Ogr_feature);
if (Ogr_geometry != NULL) {
poly_count(Ogr_geometry, (type & GV_BOUNDARY));
}
OGR_F_Destroy(Ogr_feature);
}
}
G_debug(1, "n polygon boundaries: %d", n_polygon_boundaries);
if (n_polygon_boundaries > 50) {
split_distance =
area_size / log(n_polygon_boundaries);
/* divisor is the handle: increase divisor to decrease split_distance */
split_distance = split_distance / 5.;
G_debug(1, "root of area size: %f", area_size);
G_verbose_message(_("Boundary splitting distance in map units: %G"),
split_distance);
}
/* <-- estimate distance for boundary splitting */
use_tmp_vect = n_polygon_boundaries > 0;
if (use_tmp_vect) {
/* open temporary vector, do the work in the temporary vector
* at the end copy alive lines to output vector
* in case of polygons this reduces the coor file size by a factor of 2 to 5
* only needed when cleaning polygons */
sprintf(tempvect, "%s_tmp", output);
G_verbose_message(_("Using temporary vector <%s>"), tempvect);
Vect_open_new(&Tmp, tempvect, flag.z->answer != 0);
Out = &Tmp;
}
}
Vect_hist_command(&Map);
/* Points and lines are written immediately with categories. Boundaries of polygons are
* written to the vector then cleaned and centroids are calculated for all areas in cleaan vector.
* Then second pass through finds all centroids in each polygon feature and adds its category
* to the centroid. The result is that one centroids may have 0, 1 ore more categories
* of one ore more (more input layers) fields. */
with_z = 0;
for (layer = 0; layer < nlayers; layer++) {
layer_id = layers[layer];
Ogr_layer = OGR_DS_GetLayer(Ogr_ds, layer_id);
Ogr_featuredefn = OGR_L_GetLayerDefn(Ogr_layer);
/* Add DB link */
if (!flag.notab->answer) {
char *cat_col_name = GV_KEY_COLUMN;
if (nlayers == 1) { /* one layer only */
Fi = Vect_default_field_info(&Map, layer + 1, NULL,
GV_1TABLE);
}
else {
Fi = Vect_default_field_info(&Map, layer + 1, NULL,
GV_MTABLE);
}
if (ncnames > 0) {
cat_col_name = param.cnames->answers[0];
}
Vect_map_add_dblink(&Map, layer + 1, layer_names[layer], Fi->table,
cat_col_name, Fi->database, Fi->driver);
ncols = OGR_FD_GetFieldCount(Ogr_featuredefn);
G_debug(2, "%d columns", ncols);
/* Create table */
sprintf(buf, "create table %s (%s integer", Fi->table,
cat_col_name);
db_set_string(&sql, buf);
for (i = 0; i < ncols; i++) {
Ogr_field = OGR_FD_GetFieldDefn(Ogr_featuredefn, i);
Ogr_ftype = OGR_Fld_GetType(Ogr_field);
G_debug(3, "Ogr_ftype: %i", Ogr_ftype); /* look up below */
if (i < ncnames - 1) {
Ogr_fieldname = G_store(param.cnames->answers[i + 1]);
}
else {
/* Change column names to [A-Za-z][A-Za-z0-9_]* */
Ogr_fieldname = G_store(OGR_Fld_GetNameRef(Ogr_field));
G_debug(3, "Ogr_fieldname: '%s'", Ogr_fieldname);
G_str_to_sql(Ogr_fieldname);
G_debug(3, "Ogr_fieldname: '%s'", Ogr_fieldname);
}
/* avoid that we get the 'cat' column twice */
if (strcmp(Ogr_fieldname, GV_KEY_COLUMN) == 0) {
sprintf(namebuf, "%s_", Ogr_fieldname);
Ogr_fieldname = G_store(namebuf);
}
/* captial column names are a pain in SQL */
if (flag.tolower->answer)
G_str_to_lower(Ogr_fieldname);
if (strcmp(OGR_Fld_GetNameRef(Ogr_field), Ogr_fieldname) != 0) {
G_warning(_("Column name changed: '%s' -> '%s'"),
OGR_Fld_GetNameRef(Ogr_field), Ogr_fieldname);
}
/** Simple 32bit integer OFTInteger = 0 **/
/** List of 32bit integers OFTIntegerList = 1 **/
/** Double Precision floating point OFTReal = 2 **/
/** List of doubles OFTRealList = 3 **/
/** String of ASCII chars OFTString = 4 **/
/** Array of strings OFTStringList = 5 **/
/** Double byte string (unsupported) OFTWideString = 6 **/
/** List of wide strings (unsupported) OFTWideStringList = 7 **/
/** Raw Binary data (unsupported) OFTBinary = 8 **/
/** OFTDate = 9 **/
/** OFTTime = 10 **/
/** OFTDateTime = 11 **/
if (Ogr_ftype == OFTInteger) {
sprintf(buf, ", %s integer", Ogr_fieldname);
}
else if (Ogr_ftype == OFTIntegerList) {
/* hack: treat as string */
sprintf(buf, ", %s varchar ( %d )", Ogr_fieldname,
OFTIntegerListlength);
G_warning(_("Writing column <%s> with fixed length %d chars (may be truncated)"),
Ogr_fieldname, OFTIntegerListlength);
}
else if (Ogr_ftype == OFTReal) {
sprintf(buf, ", %s double precision", Ogr_fieldname);
#if GDAL_VERSION_NUM >= 1320
}
else if (Ogr_ftype == OFTDate) {
sprintf(buf, ", %s date", Ogr_fieldname);
}
else if (Ogr_ftype == OFTTime) {
sprintf(buf, ", %s time", Ogr_fieldname);
}
else if (Ogr_ftype == OFTDateTime) {
sprintf(buf, ", %s datetime", Ogr_fieldname);
#endif
}
else if (Ogr_ftype == OFTString) {
int fwidth;
fwidth = OGR_Fld_GetWidth(Ogr_field);
/* TODO: read all records first and find the longest string length */
if (fwidth == 0) {
G_warning(_("Width for column %s set to 255 (was not specified by OGR), "
"some strings may be truncated!"),
Ogr_fieldname);
fwidth = 255;
}
sprintf(buf, ", %s varchar ( %d )", Ogr_fieldname,
fwidth);
}
else if (Ogr_ftype == OFTStringList) {
/* hack: treat as string */
sprintf(buf, ", %s varchar ( %d )", Ogr_fieldname,
OFTIntegerListlength);
G_warning(_("Writing column %s with fixed length %d chars (may be truncated)"),
Ogr_fieldname, OFTIntegerListlength);
}
else {
G_warning(_("Column type not supported (%s)"),
Ogr_fieldname);
buf[0] = 0;
}
db_append_string(&sql, buf);
G_free(Ogr_fieldname);
}
db_append_string(&sql, ")");
G_debug(3, db_get_string(&sql));
driver =
db_start_driver_open_database(Fi->driver,
Vect_subst_var(Fi->database,
&Map));
if (driver == NULL) {
G_fatal_error(_("Unable open database <%s> by driver <%s>"),
Vect_subst_var(Fi->database, &Map), Fi->driver);
}
if (db_execute_immediate(driver, &sql) != DB_OK) {
db_close_database(driver);
db_shutdown_driver(driver);
G_fatal_error(_("Unable to create table: '%s'"),
db_get_string(&sql));
}
if (db_create_index2(driver, Fi->table, cat_col_name) != DB_OK)
G_warning(_("Unable to create index for table <%s>, key <%s>"),
Fi->table, cat_col_name);
if (db_grant_on_table
(driver, Fi->table, DB_PRIV_SELECT,
DB_GROUP | DB_PUBLIC) != DB_OK)
G_fatal_error(_("Unable to grant privileges on table <%s>"),
Fi->table);
db_begin_transaction(driver);
}
/* Import feature */
cat = 1;
nogeom = 0;
OGR_L_ResetReading(Ogr_layer);
n_features = feature_count = 0;
n_features = OGR_L_GetFeatureCount(Ogr_layer, 1);
G_important_message(_("Importing %d features (OGR layer <%s>)..."),
n_features, layer_names[layer]);
while ((Ogr_feature = OGR_L_GetNextFeature(Ogr_layer)) != NULL) {
G_percent(feature_count++, n_features, 1); /* show something happens */
/* Geometry */
Ogr_geometry = OGR_F_GetGeometryRef(Ogr_feature);
if (Ogr_geometry == NULL) {
nogeom++;
}
else {
dim = OGR_G_GetCoordinateDimension(Ogr_geometry);
if (dim > 2)
with_z = 1;
geom(Ogr_geometry, Out, layer + 1, cat, min_area, type,
flag.no_clean->answer);
}
/* Attributes */
if (!flag.notab->answer) {
sprintf(buf, "insert into %s values ( %d", Fi->table, cat);
db_set_string(&sql, buf);
for (i = 0; i < ncols; i++) {
Ogr_field = OGR_FD_GetFieldDefn(Ogr_featuredefn, i);
Ogr_ftype = OGR_Fld_GetType(Ogr_field);
if (OGR_F_IsFieldSet(Ogr_feature, i)) {
if (Ogr_ftype == OFTInteger || Ogr_ftype == OFTReal) {
sprintf(buf, ", %s",
OGR_F_GetFieldAsString(Ogr_feature, i));
#if GDAL_VERSION_NUM >= 1320
/* should we use OGR_F_GetFieldAsDateTime() here ? */
}
else if (Ogr_ftype == OFTDate || Ogr_ftype == OFTTime
|| Ogr_ftype == OFTDateTime) {
char *newbuf;
db_set_string(&strval, (char *)
OGR_F_GetFieldAsString(Ogr_feature,
i));
db_double_quote_string(&strval);
sprintf(buf, ", '%s'", db_get_string(&strval));
newbuf = G_str_replace(buf, "/", "-"); /* fix 2001/10/21 to 2001-10-21 */
sprintf(buf, "%s", newbuf);
#endif
}
else if (Ogr_ftype == OFTString ||
Ogr_ftype == OFTIntegerList) {
db_set_string(&strval, (char *)
OGR_F_GetFieldAsString(Ogr_feature,
i));
db_double_quote_string(&strval);
sprintf(buf, ", '%s'", db_get_string(&strval));
}
}
else {
/* G_warning (_("Column value not set" )); */
if (Ogr_ftype == OFTInteger || Ogr_ftype == OFTReal) {
sprintf(buf, ", NULL");
#if GDAL_VERSION_NUM >= 1320
}
else if (Ogr_ftype == OFTString ||
Ogr_ftype == OFTIntegerList ||
Ogr_ftype == OFTDate) {
#else
}
else if (Ogr_ftype == OFTString ||
Ogr_ftype == OFTIntegerList) {
#endif
sprintf(buf, ", ''");
}
}
db_append_string(&sql, buf);
}
db_append_string(&sql, " )");
G_debug(3, db_get_string(&sql));
if (db_execute_immediate(driver, &sql) != DB_OK) {
db_close_database(driver);
db_shutdown_driver(driver);
G_fatal_error(_("Cannot insert new row: %s"),
db_get_string(&sql));
}
}
OGR_F_Destroy(Ogr_feature);
cat++;
}
G_percent(1, 1, 1); /* finish it */
if (!flag.notab->answer) {
db_commit_transaction(driver);
db_close_database_shutdown_driver(driver);
}
if (nogeom > 0)
G_warning(_("%d %s without geometry"), nogeom,
nogeom == 1 ? "feature" : "features");
}
separator = "-----------------------------------------------------";
G_message("%s", separator);
if (use_tmp_vect) {
/* TODO: is it necessary to build here? probably not, consumes time */
/* GV_BUILD_BASE is sufficient to toggle boundary cleaning */
Vect_build_partial(&Tmp, GV_BUILD_BASE);
}
if (use_tmp_vect && !flag.no_clean->answer &&
Vect_get_num_primitives(Out, GV_BOUNDARY) > 0) {
int ret, centr, ncentr, otype, n_overlaps, n_nocat;
CENTR *Centr;
struct spatial_index si;
double x, y, total_area, overlap_area, nocat_area;
struct bound_box box;
struct line_pnts *Points;
int nmodif;
Points = Vect_new_line_struct();
G_message("%s", separator);
G_warning(_("Cleaning polygons, result is not guaranteed!"));
if (snap >= 0) {
G_message("%s", separator);
G_message(_("Snapping boundaries (threshold = %.3e)..."), snap);
Vect_snap_lines(&Tmp, GV_BOUNDARY, snap, NULL);
}
/* It is not to clean to snap centroids, but I have seen data with 2 duplicate polygons
* (as far as decimal places were printed) and centroids were not identical */
/* Disabled, because overlapping polygons result in many duplicate centroids anyway */
/*
fprintf ( stderr, separator );
fprintf ( stderr, "Snap centroids (threshold 0.000001):\n" );
Vect_snap_lines ( &Map, GV_CENTROID, 0.000001, NULL, stderr );
*/
G_message("%s", separator);
G_message(_("Breaking polygons..."));
Vect_break_polygons(&Tmp, GV_BOUNDARY, NULL);
/* It is important to remove also duplicate centroids in case of duplicate input polygons */
G_message("%s", separator);
G_message(_("Removing duplicates..."));
Vect_remove_duplicates(&Tmp, GV_BOUNDARY | GV_CENTROID, NULL);
/* in non-pathological cases, the bulk of the cleaning is now done */
/* Vect_clean_small_angles_at_nodes() can change the geometry so that new intersections
* are created. We must call Vect_break_lines(), Vect_remove_duplicates()
* and Vect_clean_small_angles_at_nodes() until no more small angles are found */
do {
G_message("%s", separator);
G_message(_("Breaking boundaries..."));
Vect_break_lines(&Tmp, GV_BOUNDARY, NULL);
G_message("%s", separator);
G_message(_("Removing duplicates..."));
Vect_remove_duplicates(&Tmp, GV_BOUNDARY, NULL);
G_message("%s", separator);
G_message(_("Cleaning boundaries at nodes..."));
nmodif =
Vect_clean_small_angles_at_nodes(&Tmp, GV_BOUNDARY, NULL);
} while (nmodif > 0);
/* merge boundaries */
G_message("%s", separator);
G_message(_("Merging boundaries..."));
Vect_merge_lines(&Tmp, GV_BOUNDARY, NULL, NULL);
G_message("%s", separator);
if (type & GV_BOUNDARY) { /* that means lines were converted to boundaries */
G_message(_("Changing boundary dangles to lines..."));
Vect_chtype_dangles(&Tmp, -1.0, NULL);
}
else {
G_message(_("Removing dangles..."));
Vect_remove_dangles(&Tmp, GV_BOUNDARY, -1.0, NULL);
}
G_message("%s", separator);
if (type & GV_BOUNDARY) {
G_message(_("Changing boundary bridges to lines..."));
Vect_chtype_bridges(&Tmp, NULL);
}
else {
G_message(_("Removing bridges..."));
Vect_remove_bridges(&Tmp, NULL);
}
/* Boundaries are hopefully clean, build areas */
G_message("%s", separator);
Vect_build_partial(&Tmp, GV_BUILD_ATTACH_ISLES);
/* Calculate new centroids for all areas, centroids have the same id as area */
ncentr = Vect_get_num_areas(&Tmp);
G_debug(3, "%d centroids/areas", ncentr);
Centr = (CENTR *) G_calloc(ncentr + 1, sizeof(CENTR));
Vect_spatial_index_init(&si, 0);
for (centr = 1; centr <= ncentr; centr++) {
Centr[centr].valid = 0;
Centr[centr].cats = Vect_new_cats_struct();
ret = Vect_get_point_in_area(&Tmp, centr, &x, &y);
if (ret < 0) {
G_warning(_("Unable to calculate area centroid"));
continue;
}
Centr[centr].x = x;
Centr[centr].y = y;
Centr[centr].valid = 1;
box.N = box.S = y;
box.E = box.W = x;
box.T = box.B = 0;
Vect_spatial_index_add_item(&si, centr, &box);
}
/* Go through all layers and find centroids for each polygon */
for (layer = 0; layer < nlayers; layer++) {
G_message("%s", separator);
G_message(_("Finding centroids for OGR layer <%s>..."), layer_names[layer]);
layer_id = layers[layer];
Ogr_layer = OGR_DS_GetLayer(Ogr_ds, layer_id);
n_features = OGR_L_GetFeatureCount(Ogr_layer, 1);
OGR_L_ResetReading(Ogr_layer);
cat = 0; /* field = layer + 1 */
G_percent(cat, n_features, 2);
while ((Ogr_feature = OGR_L_GetNextFeature(Ogr_layer)) != NULL) {
cat++;
G_percent(cat, n_features, 2);
/* Geometry */
Ogr_geometry = OGR_F_GetGeometryRef(Ogr_feature);
if (Ogr_geometry != NULL) {
centroid(Ogr_geometry, Centr, &si, layer + 1, cat,
min_area, type);
}
OGR_F_Destroy(Ogr_feature);
}
}
/* Write centroids */
G_message("%s", separator);
G_message(_("Writing centroids..."));
n_overlaps = n_nocat = 0;
total_area = overlap_area = nocat_area = 0.0;
for (centr = 1; centr <= ncentr; centr++) {
double area;
G_percent(centr, ncentr, 2);
area = Vect_get_area_area(&Tmp, centr);
total_area += area;
if (!(Centr[centr].valid)) {
continue;
}
if (Centr[centr].cats->n_cats == 0) {
nocat_area += area;
n_nocat++;
continue;
}
if (Centr[centr].cats->n_cats > 1) {
Vect_cat_set(Centr[centr].cats, nlayers + 1,
Centr[centr].cats->n_cats);
overlap_area += area;
n_overlaps++;
}
Vect_reset_line(Points);
Vect_append_point(Points, Centr[centr].x, Centr[centr].y, 0.0);
if (type & GV_POINT)
otype = GV_POINT;
else
otype = GV_CENTROID;
Vect_write_line(&Tmp, otype, Points, Centr[centr].cats);
}
if (Centr)
G_free(Centr);
Vect_spatial_index_destroy(&si);
if (n_overlaps > 0) {
G_warning(_("%d areas represent more (overlapping) features, because polygons overlap "
"in input layer(s). Such areas are linked to more than 1 row in attribute table. "
"The number of features for those areas is stored as category in layer %d"),
n_overlaps, nlayers + 1);
}
G_message("%s", separator);
Vect_hist_write(&Map, separator);
Vect_hist_write(&Map, "\n");
sprintf(buf, _("%d input polygons\n"), n_polygons);
G_message(_("%d input polygons"), n_polygons);
Vect_hist_write(&Map, buf);
sprintf(buf, _("Total area: %G (%d areas)\n"), total_area, ncentr);
G_message(_("Total area: %G (%d areas)"), total_area, ncentr);
Vect_hist_write(&Map, buf);
sprintf(buf, _("Overlapping area: %G (%d areas)\n"), overlap_area,
n_overlaps);
G_message(_("Overlapping area: %G (%d areas)"), overlap_area,
n_overlaps);
Vect_hist_write(&Map, buf);
sprintf(buf, _("Area without category: %G (%d areas)\n"), nocat_area,
n_nocat);
G_message(_("Area without category: %G (%d areas)"), nocat_area,
n_nocat);
Vect_hist_write(&Map, buf);
G_message("%s", separator);
}
/* needed?
* OGR_DS_Destroy( Ogr_ds );
*/
if (use_tmp_vect) {
/* Copy temporary vector to output vector */
Vect_copy_map_lines(&Tmp, &Map);
/* release memory occupied by topo, we may need that memory for main output */
Vect_set_release_support(&Tmp);
Vect_close(&Tmp);
Vect_delete(tempvect);
}
Vect_build(&Map);
Vect_close(&Map);
/* -------------------------------------------------------------------- */
/* Extend current window based on dataset. */
/* -------------------------------------------------------------------- */
if (flag.extend->answer) {
G_get_default_window(&loc_wind);
loc_wind.north = MAX(loc_wind.north, cellhd.north);
loc_wind.south = MIN(loc_wind.south, cellhd.south);
loc_wind.west = MIN(loc_wind.west, cellhd.west);
loc_wind.east = MAX(loc_wind.east, cellhd.east);
loc_wind.rows = (int)ceil((loc_wind.north - loc_wind.south)
/ loc_wind.ns_res);
loc_wind.south = loc_wind.north - loc_wind.rows * loc_wind.ns_res;
loc_wind.cols = (int)ceil((loc_wind.east - loc_wind.west)
/ loc_wind.ew_res);
loc_wind.east = loc_wind.west + loc_wind.cols * loc_wind.ew_res;
G__put_window(&loc_wind, "../PERMANENT", "DEFAULT_WIND");
}
if (with_z && !flag.z->answer)
G_warning(_("Input data contains 3D features. Created vector is 2D only, "
"use -z flag to import 3D vector."));
exit(EXIT_SUCCESS);
}
int execute_random(struct rr_state *theState)
{
long nt;
long nc;
struct Cell_head window;
int nrows, ncols, row, col;
int infd, cinfd, outfd;
struct Map_info Out;
struct field_info *fi;
dbTable *table;
dbColumn *column;
dbString sql;
dbDriver *driver;
struct line_pnts *Points;
struct line_cats *Cats;
int cat;
RASTER_MAP_TYPE type;
int do_check;
G_get_window(&window);
nrows = Rast_window_rows();
ncols = Rast_window_cols();
/* open the data files, input raster should be set-up already */
if ((infd = theState->fd_old) < 0)
G_fatal_error(_("Unable to open raster map <%s>"),
theState->inraster);
if (theState->docover == TRUE) {
if ((cinfd = theState->fd_cold) < 0)
G_fatal_error(_("Unable to open raster map <%s>"),
theState->inrcover);
}
if (theState->outraster != NULL) {
if (theState->docover == TRUE)
type = theState->cover.type;
else
type = theState->buf.type;
outfd = Rast_open_new(theState->outraster, type);
theState->fd_new = outfd;
}
if (theState->outvector) {
if (Vect_open_new(&Out, theState->outvector, theState->z_geometry) < 0)
G_fatal_error(_("Unable to create vector map <%s>"),
theState->outvector);
Vect_hist_command(&Out);
fi = Vect_default_field_info(&Out, 1, NULL, GV_1TABLE);
driver =
db_start_driver_open_database(fi->driver,
Vect_subst_var(fi->database, &Out));
if (!driver)
G_fatal_error(_("Unable to open database <%s> by driver <%s>"),
Vect_subst_var(fi->database, &Out), fi->driver);
db_set_error_handler_driver(driver);
Vect_map_add_dblink(&Out, 1, NULL, fi->table, GV_KEY_COLUMN, fi->database,
fi->driver);
if (theState->docover == TRUE)
table = db_alloc_table(3);
else
table = db_alloc_table(2);
db_set_table_name(table, fi->table);
column = db_get_table_column(table, 0);
db_set_column_name(column, GV_KEY_COLUMN);
db_set_column_sqltype(column, DB_SQL_TYPE_INTEGER);
column = db_get_table_column(table, 1);
db_set_column_name(column, "value");
db_set_column_sqltype(column, DB_SQL_TYPE_DOUBLE_PRECISION);
if (theState->docover == TRUE) {
column = db_get_table_column(table, 2);
db_set_column_name(column, "covervalue");
db_set_column_sqltype(column, DB_SQL_TYPE_DOUBLE_PRECISION);
}
if (db_create_table(driver, table) != DB_OK)
G_warning(_("Cannot create new table"));
db_begin_transaction(driver);
Points = Vect_new_line_struct();
Cats = Vect_new_cats_struct();
db_init_string(&sql);
}
if (theState->outvector && theState->outraster)
G_message(_("Writing raster map <%s> and vector map <%s> ..."),
theState->outraster, theState->outvector);
else if (theState->outraster)
G_message(_("Writing raster map <%s> ..."), theState->outraster);
else if (theState->outvector)
G_message(_("Writing vector map <%s> ..."), theState->outvector);
G_percent(0, theState->nRand, 2);
init_rand();
nc = (theState->use_nulls) ? theState->nCells :
theState->nCells - theState->nNulls;
nt = theState->nRand; /* Number of points to generate */
cat = 1;
/* Execute for loop for every row if nt>1 */
for (row = 0; row < nrows && nt; row++) {
Rast_get_row(infd, theState->buf.data.v, row, theState->buf.type);
if (theState->docover == TRUE) {
Rast_get_row(cinfd, theState->cover.data.v, row,
theState->cover.type);
}
for (col = 0; col < ncols && nt; col++) {
do_check = 0;
if (theState->use_nulls || !is_null_value(theState->buf, col))
do_check = 1;
if (do_check && theState->docover == TRUE) { /* skip no data cover points */
if (!theState->use_nulls &&
is_null_value(theState->cover, col))
do_check = 0;
}
if (do_check && make_rand() % nc < nt) {
nt--;
if (is_null_value(theState->buf, col))
cpvalue(&theState->nulls, 0, &theState->buf, col);
if (theState->docover == TRUE) {
if (is_null_value(theState->cover, col))
cpvalue(&theState->cnulls, 0, &theState->cover, col);
}
if (theState->outvector) {
double x, y, val, coverval;
char buf[500];
Vect_reset_line(Points);
Vect_reset_cats(Cats);
x = window.west + (col + .5) * window.ew_res;
y = window.north - (row + .5) * window.ns_res;
val = cell_as_dbl(&theState->buf, col);
if (theState->docover == 1)
coverval = cell_as_dbl(&theState->cover, col);
if (theState->z_geometry)
Vect_append_point(Points, x, y, val);
else
Vect_append_point(Points, x, y, 0.0);
Vect_cat_set(Cats, 1, cat);
Vect_write_line(&Out, GV_POINT, Points, Cats);
if (theState->docover == 1)
if (is_null_value(theState->cover, col))
sprintf(buf,
"insert into %s values ( %d, %f, NULL )",
fi->table, cat, val);
else
sprintf(buf,
"insert into %s values ( %d, %f, %f )",
fi->table, cat, val, coverval);
else
sprintf(buf, "insert into %s values ( %d, %f )",
fi->table, cat, val);
db_set_string(&sql, buf);
if (db_execute_immediate(driver, &sql) != DB_OK)
G_fatal_error(_("Cannot insert new record: %s"),
db_get_string(&sql));
cat++;
}
G_percent((theState->nRand - nt), theState->nRand, 2);
}
else {
set_to_null(&theState->buf, col);
if (theState->docover == 1)
set_to_null(&theState->cover, col);
}
if (do_check)
nc--;
}
while (col < ncols) {
set_to_null(&theState->buf, col);
if (theState->docover == 1)
set_to_null(&theState->cover, col);
col++;
}
if (theState->outraster) {
if (theState->docover == 1)
Rast_put_row(outfd, theState->cover.data.v,
theState->cover.type);
else
Rast_put_row(outfd, theState->buf.data.v,
theState->buf.type);
}
}
/* Catch any remaining rows in the window */
if (theState->outraster && row < nrows) {
for (col = 0; col < ncols; col++) {
if (theState->docover == 1)
set_to_null(&theState->cover, col);
else
set_to_null(&theState->buf, col);
}
for (; row < nrows; row++) {
if (theState->docover == 1)
Rast_put_row(outfd, theState->cover.data.v,
theState->cover.type);
else
Rast_put_row(outfd, theState->buf.data.v,
theState->buf.type);
}
}
if (nt > 0)
G_warning(_("Only [%ld] random points created"),
theState->nRand - nt);
/* close files */
Rast_close(infd);
if (theState->docover == TRUE)
Rast_close(cinfd);
if (theState->outvector) {
db_commit_transaction(driver);
if (db_create_index2(driver, fi->table, GV_KEY_COLUMN) != DB_OK)
G_warning(_("Unable to create index"));
if (db_grant_on_table
(driver, fi->table, DB_PRIV_SELECT,
DB_GROUP | DB_PUBLIC) != DB_OK) {
G_fatal_error(_("Unable to grant privileges on table <%s>"),
fi->table);
}
db_close_database_shutdown_driver(driver);
if (theState->notopol != 1)
Vect_build(&Out);
Vect_close(&Out);
}
if (theState->outraster)
Rast_close(outfd);
return 0;
} /* execute_random() */
/**
\brief Extrude 2D vector feature to 3D
- point -> 3d line (vertical)
- line -> set of faces (each segment defines one face)
- area -> set of faces + kernel
\param In input vector map
\param[in,out] Out output vector map
\param Cats categories
\param Points points
\param fdrast background raster map
\param trace trace raster map values
\param interpolation method
\param objheight object height
\param voffset vertical offset
\param window raster region
\param type feature type
\param centroid number of centroid for area
\return number of written objects
*/
int extrude(struct Map_info *In, struct Map_info *Out,
const struct line_cats *Cats, const struct line_pnts *Points,
int fdrast, int trace, int interp_method, double scale, int null_defined,
double null_val, double objheight, double voffset,
const struct Cell_head *window, int type, int centroid)
{
int k; /* Points->n_points */
int nlines;
double voffset_dem; /* minimal offset */
double voffset_curr; /* offset of current point */
double voffset_next; /* offset of next point */
nlines = 0;
if (type != GV_POINT && Points->n_points < 2)
return nlines; /* not enough points to face */
if (!Points_wall) {
Points_wall = Vect_new_line_struct();
Points_roof = Vect_new_line_struct();
Points_floor = Vect_new_line_struct();
Cats_floor = Vect_new_cats_struct();
}
else {
Vect_reset_line(Points_wall);
Vect_reset_line(Points_roof);
Vect_reset_line(Points_floor);
Vect_reset_cats(Cats_floor);
}
voffset_dem = 0.0;
/* do not trace -> calculate minimum dem offset */
if (fdrast >= 0 && !trace) {
for (k = 0; k < Points->n_points; k++) {
voffset_curr = scale * Rast_get_sample(fdrast, window, NULL,
Points->y[k], Points->x[k], /* north, east */
0, interp_method);
if (Rast_is_d_null_value(&voffset_curr)) {
if (null_defined)
voffset_curr = null_val;
else
voffset_curr = 0.;
}
if (k == 0) {
voffset_dem = voffset_curr;
}
else {
if (voffset_curr < voffset_dem)
voffset_dem = voffset_curr;
}
}
}
/* build walls, roof and floor */
for (k = 0; ; k++) {
voffset_curr = voffset_next = 0.0;
if (fdrast >= 0 && trace) {
voffset_curr = scale * Rast_get_sample(fdrast, window, NULL,
Points->y[k], Points->x[k], /* north, east */
0, interp_method);
if (type != GV_POINT) {
voffset_next = scale * Rast_get_sample(fdrast, window, NULL,
Points->y[k + 1], /* north, east */
Points->x[k + 1], 0,
interp_method);
}
}
if (Rast_is_d_null_value(&voffset_curr)) {
if (null_defined)
voffset_curr = null_val;
else
voffset_curr = 0.;
}
if (Rast_is_d_null_value(&voffset_next)) {
if (null_defined)
voffset_next = null_val;
else
voffset_next = 0.;
}
if (trace) {
voffset_curr += voffset;
voffset_next += voffset;
}
else {
voffset_curr = voffset_dem + voffset;
voffset_next = voffset_dem + voffset;
}
if (type == GV_POINT) {
/* point -> 3d line (vertical) */
Vect_append_point(Points_wall, Points->x[k], Points->y[k],
Points->z[k] + voffset_curr);
Vect_append_point(Points_wall, Points->x[k], Points->y[k],
Points->z[k] + objheight + (trace ? voffset_curr : 0.));
}
if (type & (GV_LINE | GV_AREA)) {
/* reset */
Vect_reset_line(Points_wall);
/* line/boundary segment -> face */
Vect_append_point(Points_wall, Points->x[k], Points->y[k],
Points->z[k] + voffset_curr);
Vect_append_point(Points_wall, Points->x[k + 1], Points->y[k + 1],
Points->z[k + 1] + voffset_next);
Vect_append_point(Points_wall, Points->x[k + 1], Points->y[k + 1],
Points->z[k + 1] + objheight + (trace ? voffset_next : 0.));
Vect_append_point(Points_wall, Points->x[k], Points->y[k],
Points->z[k] + objheight + (trace ? voffset_curr : 0.));
Vect_append_point(Points_wall, Points->x[k], Points->y[k],
Points->z[k] + voffset_curr);
Vect_write_line(Out, GV_FACE, Points_wall, Cats);
nlines++;
if (type == GV_AREA) {
/* roof */
Vect_append_point(Points_roof, Points->x[k], Points->y[k],
Points->z[k] + objheight + (trace ? voffset_curr : 0.));
/* floor */
Vect_append_point(Points_floor, Points->x[k], Points->y[k],
Points->z[k] + voffset_curr);
}
}
if (k >= Points->n_points - 2)
break;
}
if (type == GV_POINT) {
Vect_write_line(Out, GV_LINE, Points_wall, Cats);
}
else if (type == GV_AREA && Points_roof->n_points > 2) {
/* close roof and floor */
Vect_append_point(Points_roof,
Points_roof->x[0], Points_roof->y[0],
Points_roof->z[0]);
Vect_append_point(Points_floor,
Points_floor->x[0], Points_floor->y[0],
Points_floor->z[0]);
/* write roof and floor */
Vect_write_line(Out, GV_FACE, Points_roof, Cats);
Vect_write_line(Out, GV_FACE, Points_floor, Cats);
nlines += 2;
if (centroid > 0) {
/* centroid -> kernel */
Vect_read_line(In, Points_floor, Cats_floor, centroid);
Points_floor->z[0] = Points_roof->z[0] / 2.0; /* TODO: do it better */
Vect_write_line(Out, GV_KERNEL, Points_floor, Cats_floor);
nlines++;
}
}
return nlines;
}
void QgsGrassFeatureIterator::setSelectionRect( const QgsRectangle& rect, bool useIntersect )
{
QgsDebugMsg( QString( "useIntersect = %1 rect = %2" ).arg( useIntersect ).arg( rect.toString() ) );
// TODO: selection of edited lines
// Lock because functions using static/global variables are used
// (e.g. static LocList in Vect_select_lines_by_box, global BranchBuf in RTreeGetBranches)
QgsGrass::lock();
mSelection.fill( false );
BOUND_BOX box;
box.N = rect.yMaximum();
box.S = rect.yMinimum();
box.E = rect.xMaximum();
box.W = rect.xMinimum();
box.T = PORT_DOUBLE_MAX;
box.B = -PORT_DOUBLE_MAX;
// Init structures
struct ilist * list = Vect_new_list();
if ( !useIntersect )
{ // select by bounding boxes only
if ( mSource->mLayerType == QgsGrassProvider::POINT || mSource->mLayerType == QgsGrassProvider::CENTROID ||
mSource->mLayerType == QgsGrassProvider::LINE || mSource->mLayerType == QgsGrassProvider::FACE ||
mSource->mLayerType == QgsGrassProvider::BOUNDARY ||
mSource->mLayerType == QgsGrassProvider::TOPO_POINT || mSource->mLayerType == QgsGrassProvider::TOPO_LINE ||
mSource->mEditing )
{
QgsDebugMsg( "Vect_select_lines_by_box" );
int type = mSource->mGrassType;
if ( mSource->mEditing )
{
type = GV_POINTS | GV_LINES;
}
QgsDebugMsg( QString( "type = %1" ).arg( type ) );
Vect_select_lines_by_box( mSource->map(), &box, type, list );
}
else if ( mSource->mLayerType == QgsGrassProvider::POLYGON )
{
Vect_select_areas_by_box( mSource->map(), &box, list );
}
else if ( mSource->mLayerType == QgsGrassProvider::TOPO_NODE )
{
Vect_select_nodes_by_box( mSource->map(), &box, list );
}
}
else
{ // check intersection
struct line_pnts *polygon = Vect_new_line_struct();
// Using z coor -PORT_DOUBLE_MAX/PORT_DOUBLE_MAX we cover 3D, Vect_select_lines_by_polygon is
// using dig_line_box to get the box, it is not perfect, Vect_select_lines_by_polygon
// should clarify better how 2D/3D is treated
Vect_append_point( polygon, rect.xMinimum(), rect.yMinimum(), -PORT_DOUBLE_MAX );
Vect_append_point( polygon, rect.xMaximum(), rect.yMinimum(), PORT_DOUBLE_MAX );
Vect_append_point( polygon, rect.xMaximum(), rect.yMaximum(), 0 );
Vect_append_point( polygon, rect.xMinimum(), rect.yMaximum(), 0 );
Vect_append_point( polygon, rect.xMinimum(), rect.yMinimum(), 0 );
if ( mSource->mLayerType == QgsGrassProvider::POINT || mSource->mLayerType == QgsGrassProvider::CENTROID ||
mSource->mLayerType == QgsGrassProvider::LINE || mSource->mLayerType == QgsGrassProvider::FACE ||
mSource->mLayerType == QgsGrassProvider::BOUNDARY ||
mSource->mLayerType == QgsGrassProvider::TOPO_POINT || mSource->mLayerType == QgsGrassProvider::TOPO_LINE ||
mSource->mEditing )
{
QgsDebugMsg( "Vect_select_lines_by_polygon" );
int type = mSource->mGrassType;
if ( mSource->mEditing )
{
type = GV_POINTS | GV_LINES;
}
QgsDebugMsg( QString( "type = %1" ).arg( type ) );
Vect_select_lines_by_polygon( mSource->map(), polygon, 0, NULL, type, list );
}
else if ( mSource->mLayerType == QgsGrassProvider::POLYGON )
{
Vect_select_areas_by_polygon( mSource->map(), polygon, 0, NULL, list );
}
else if ( mSource->mLayerType == QgsGrassProvider::TOPO_NODE )
{
// There is no Vect_select_nodes_by_polygon but for nodes it is the same as by box
Vect_select_nodes_by_box( mSource->map(), &box, list );
}
Vect_destroy_line_struct( polygon );
}
for ( int i = 0; i < list->n_values; i++ )
{
int lid = list->value[i];
if ( lid < 1 || lid >= mSelection.size() ) // should not happen
{
QgsDebugMsg( QString( "lid %1 out of range <1,%2>" ).arg( lid ).arg( mSelection.size() ) );
continue;
}
mSelection.setBit( lid );
}
Vect_destroy_list( list );
QgsDebugMsg( QString( " %1 features selected" ).arg( list->n_values ) );
QgsGrass::unlock();
}
int main(int argc, char *argv[])
{
int i, cat, with_z, more, ctype, nrows;
char buf[DB_SQL_MAX];
int count;
double coor[3];
int ncoor;
struct Option *driver_opt, *database_opt, *table_opt;
struct Option *xcol_opt, *ycol_opt, *zcol_opt, *keycol_opt, *where_opt,
*outvect;
struct Flag *same_table_flag;
struct GModule *module;
struct Map_info Map;
struct line_pnts *Points;
struct line_cats *Cats;
dbString sql;
dbDriver *driver;
dbCursor cursor;
dbTable *table;
dbColumn *column;
dbValue *value;
struct field_info *fi;
G_gisinit(argv[0]);
module = G_define_module();
G_add_keyword(_("vector"));
G_add_keyword(_("import"));
G_add_keyword(_("database"));
G_add_keyword(_("points"));
module->description =
_("Creates new vector (points) map from database table containing coordinates.");
table_opt = G_define_standard_option(G_OPT_DB_TABLE);
table_opt->required = YES;
table_opt->description = _("Input table name");
driver_opt = G_define_standard_option(G_OPT_DB_DRIVER);
driver_opt->options = db_list_drivers();
driver_opt->answer = (char *)db_get_default_driver_name();
driver_opt->guisection = _("Input DB");
database_opt = G_define_standard_option(G_OPT_DB_DATABASE);
database_opt->answer = (char *)db_get_default_database_name();
database_opt->guisection = _("Input DB");
xcol_opt = G_define_standard_option(G_OPT_DB_COLUMN);
xcol_opt->key = "x";
xcol_opt->required = YES;
xcol_opt->description = _("Name of column containing x coordinate");
ycol_opt = G_define_standard_option(G_OPT_DB_COLUMN);
ycol_opt->key = "y";
ycol_opt->required = YES;
ycol_opt->description = _("Name of column containing y coordinate");
zcol_opt = G_define_standard_option(G_OPT_DB_COLUMN);
zcol_opt->key = "z";
zcol_opt->description = _("Name of column containing z coordinate");
zcol_opt->guisection = _("3D output");
keycol_opt = G_define_standard_option(G_OPT_DB_COLUMN);
keycol_opt->key = "key";
keycol_opt->required = NO;
keycol_opt->label = _("Name of column containing category number");
keycol_opt->description = _("Must refer to an integer column");
where_opt = G_define_standard_option(G_OPT_DB_WHERE);
where_opt->guisection = _("Selection");
outvect = G_define_standard_option(G_OPT_V_OUTPUT);
same_table_flag = G_define_flag();
same_table_flag->key = 't';
same_table_flag->description =
_("Use imported table as attribute table for new map");
if (G_parser(argc, argv))
exit(EXIT_FAILURE);
if (zcol_opt->answer) {
with_z = WITH_Z;
ncoor = 3;
}
else {
with_z = WITHOUT_Z;
ncoor = 2;
}
Points = Vect_new_line_struct();
Cats = Vect_new_cats_struct();
db_init_string(&sql);
if (G_get_overwrite()) {
/* We don't want to delete the input table when overwriting the output
* vector. */
char name[GNAME_MAX], mapset[GMAPSET_MAX];
if (!G_name_is_fully_qualified(outvect->answer, name, mapset)) {
strcpy(name, outvect->answer);
strcpy(mapset, G_mapset());
}
Vect_set_open_level(1); /* no topo needed */
if (strcmp(mapset, G_mapset()) == 0 && G_find_vector2(name, mapset) &&
Vect_open_old(&Map, name, mapset) >= 0) {
int num_dblinks;
num_dblinks = Vect_get_num_dblinks(&Map);
for (i = 0; i < num_dblinks; i++) {
if ((fi = Vect_get_dblink(&Map, i)) != NULL &&
strcmp(fi->driver, driver_opt->answer) == 0 &&
strcmp(fi->database, database_opt->answer) == 0 &&
strcmp(fi->table, table_opt->answer) == 0)
G_fatal_error(_("Vector map <%s> cannot be overwritten "
"because input table <%s> is linked to "
"this map."),
outvect->answer, table_opt->answer);
}
Vect_close(&Map);
}
}
if (Vect_open_new(&Map, outvect->answer, with_z) < 0)
G_fatal_error(_("Unable to create vector map <%s>"),
outvect->answer);
Vect_set_error_handler_io(NULL, &Map);
Vect_hist_command(&Map);
fi = Vect_default_field_info(&Map, 1, NULL, GV_1TABLE);
/* Open driver */
driver = db_start_driver_open_database(driver_opt->answer,
database_opt->answer);
if (driver == NULL) {
G_fatal_error(_("Unable to open database <%s> by driver <%s>"),
fi->database, fi->driver);
}
db_set_error_handler_driver(driver);
/* check if target table already exists */
G_debug(3, "Output vector table <%s>, driver: <%s>, database: <%s>",
outvect->answer, db_get_default_driver_name(),
db_get_default_database_name());
if (!same_table_flag->answer &&
db_table_exists(db_get_default_driver_name(),
db_get_default_database_name(), outvect->answer) == 1)
G_fatal_error(_("Output vector map, table <%s> (driver: <%s>, database: <%s>) "
"already exists"), outvect->answer,
db_get_default_driver_name(),
db_get_default_database_name());
if (keycol_opt->answer) {
int coltype;
coltype = db_column_Ctype(driver, table_opt->answer, keycol_opt->answer);
if (coltype == -1)
G_fatal_error(_("Column <%s> not found in table <%s>"),
keycol_opt->answer, table_opt->answer);
if (coltype != DB_C_TYPE_INT)
G_fatal_error(_("Data type of key column must be integer"));
}
else {
if (same_table_flag->answer) {
G_fatal_error(_("Option <%s> must be specified when -%c flag is given"),
keycol_opt->key, same_table_flag->key);
}
if (strcmp(db_get_default_driver_name(), "sqlite") != 0)
G_fatal_error(_("Unable to define key column. This operation is not supported "
"by <%s> driver. You need to define <%s> option."),
fi->driver, keycol_opt->key);
}
/* Open select cursor */
sprintf(buf, "SELECT %s, %s", xcol_opt->answer, ycol_opt->answer);
db_set_string(&sql, buf);
if (with_z) {
sprintf(buf, ", %s", zcol_opt->answer);
db_append_string(&sql, buf);
}
if (keycol_opt->answer) {
sprintf(buf, ", %s", keycol_opt->answer);
db_append_string(&sql, buf);
}
sprintf(buf, " FROM %s", table_opt->answer);
db_append_string(&sql, buf);
if (where_opt->answer) {
sprintf(buf, " WHERE %s", where_opt->answer);
db_append_string(&sql, buf);
}
G_debug(2, "SQL: %s", db_get_string(&sql));
if (db_open_select_cursor(driver, &sql, &cursor, DB_SEQUENTIAL) != DB_OK) {
G_fatal_error(_("Unable to open select cursor: '%s'"),
db_get_string(&sql));
}
table = db_get_cursor_table(&cursor);
nrows = db_get_num_rows(&cursor);
G_debug(2, "%d points selected", nrows);
count = cat = 0;
G_message(_("Writing features..."));
while (db_fetch(&cursor, DB_NEXT, &more) == DB_OK && more) {
G_percent(count, nrows, 2);
/* key column */
if (keycol_opt->answer) {
column = db_get_table_column(table, with_z ? 3 : 2);
ctype = db_sqltype_to_Ctype(db_get_column_sqltype(column));
if (ctype != DB_C_TYPE_INT)
G_fatal_error(_("Key column must be integer"));
value = db_get_column_value(column);
cat = db_get_value_int(value);
}
else {
cat++;
}
/* coordinates */
for (i = 0; i < ncoor; i++) {
column = db_get_table_column(table, i);
ctype = db_sqltype_to_Ctype(db_get_column_sqltype(column));
if (ctype != DB_C_TYPE_INT && ctype != DB_C_TYPE_DOUBLE)
G_fatal_error(_("x/y/z column must be integer or double"));
value = db_get_column_value(column);
if (ctype == DB_C_TYPE_INT)
coor[i] = (double)db_get_value_int(value);
else
coor[i] = db_get_value_double(value);
}
Vect_reset_line(Points);
Vect_reset_cats(Cats);
Vect_append_point(Points, coor[0], coor[1], coor[2]);
Vect_cat_set(Cats, 1, cat);
Vect_write_line(&Map, GV_POINT, Points, Cats);
count++;
}
G_percent(1, 1, 1);
/* close connection to input DB before copying attributes */
db_close_database_shutdown_driver(driver);
/* Copy table */
if (!same_table_flag->answer) {
G_message(_("Copying attributes..."));
if (DB_FAILED == db_copy_table_where(driver_opt->answer, database_opt->answer,
table_opt->answer,
fi->driver, fi->database, fi->table,
where_opt->answer)) { /* where can be NULL */
G_warning(_("Unable to copy table"));
}
else {
Vect_map_add_dblink(&Map, 1, NULL, fi->table,
keycol_opt->answer ? keycol_opt->answer : GV_KEY_COLUMN,
fi->database, fi->driver);
}
if (!keycol_opt->answer) {
/* TODO: implement for all DB drivers in generic way if
* possible */
driver = db_start_driver_open_database(fi->driver, fi->database);
if (driver == NULL) {
G_fatal_error(_("Unable to open database <%s> by driver <%s>"),
fi->database, fi->driver);
}
db_set_error_handler_driver(driver);
/* add key column */
sprintf(buf, "ALTER TABLE %s ADD COLUMN %s INTEGER",
fi->table, GV_KEY_COLUMN);
db_set_string(&sql, buf);
if (db_execute_immediate(driver, &sql) != DB_OK) {
G_fatal_error(_("Unable to add key column <%s>: "
"SERIAL type is not supported by <%s>"),
GV_KEY_COLUMN, fi->driver);
}
/* update key column */
sprintf(buf, "UPDATE %s SET %s = _ROWID_",
fi->table, GV_KEY_COLUMN);
db_set_string(&sql, buf);
if (db_execute_immediate(driver, &sql) != DB_OK) {
G_fatal_error(_("Failed to update key column <%s>"),
GV_KEY_COLUMN);
}
}
}
else {
/* do not copy attributes, link original table */
Vect_map_add_dblink(&Map, 1, NULL, table_opt->answer,
keycol_opt->answer ? keycol_opt->answer : GV_KEY_COLUMN,
database_opt->answer, driver_opt->answer);
}
Vect_build(&Map);
Vect_close(&Map);
G_done_msg(_n("%d point written to vector map.",
"%d points written to vector map.",
count), count);
return (EXIT_SUCCESS);
}
int main(int argc, char *argv[])
{
struct GModule *module;
struct Option *in_opt, *layer_opt, *out_opt, *length_opt, *units_opt, *vertices_opt;
struct Map_info In, Out;
struct line_pnts *Points, *Points2;
struct line_cats *Cats;
int line, nlines, layer;
double length = -1;
int vertices = 0;
double (*line_length) ();
int latlon = 0;
G_gisinit(argv[0]);
module = G_define_module();
G_add_keyword(_("vector"));
G_add_keyword(_("geometry"));
module->description = _("Splits vector lines to shorter segments.");
in_opt = G_define_standard_option(G_OPT_V_INPUT);
layer_opt = G_define_standard_option(G_OPT_V_FIELD_ALL);
out_opt = G_define_standard_option(G_OPT_V_OUTPUT);
length_opt = G_define_option();
length_opt->key = "length";
length_opt->type = TYPE_DOUBLE;
length_opt->required = NO;
length_opt->multiple = NO;
length_opt->description = _("Maximum segment length");
units_opt = G_define_option();
units_opt->key = "units";
units_opt->type = TYPE_STRING;
units_opt->required = NO;
units_opt->multiple = NO;
units_opt->options = "meters,kilometers,feet,miles,nautmiles";
units_opt->answer = "meters";
units_opt->description = _("Length units");
vertices_opt = G_define_option();
vertices_opt->key = "vertices";
vertices_opt->type = TYPE_INTEGER;
vertices_opt->required = NO;
vertices_opt->multiple = NO;
vertices_opt->description = _("Maximum number of vertices in segment");
if (G_parser(argc, argv))
exit(EXIT_FAILURE);
if ((length_opt->answer && vertices_opt->answer) ||
!(length_opt->answer || vertices_opt->answer))
G_fatal_error(_("Use either length or vertices"));
line_length = NULL;
if (length_opt->answer) {
length = atof(length_opt->answer);
if (length <= 0)
G_fatal_error(_("Length must be positive but is %g"), length);
/* convert length to meters */
if (strcmp(units_opt->answer, "meters") == 0)
/* do nothing */ ;
else if (strcmp(units_opt->answer, "kilometers") == 0)
length *= FROM_KILOMETERS;
else if (strcmp(units_opt->answer, "feet") == 0)
length *= FROM_FEET;
else if (strcmp(units_opt->answer, "miles") == 0)
length *= FROM_MILES;
else if (strcmp(units_opt->answer, "nautmiles") == 0)
length *= FROM_NAUTMILES;
else
G_fatal_error(_("Unknown unit %s"), units_opt->answer);
/* set line length function */
if ((latlon = (G_projection() == PROJECTION_LL)) == 1)
line_length = Vect_line_geodesic_length;
else {
double factor;
line_length = Vect_line_length;
/* convert length to map units */
if ((factor = G_database_units_to_meters_factor()) == 0)
G_fatal_error(_("Can not get projection units"));
else {
/* meters to units */
length = length / factor;
}
}
G_verbose_message(_("length in %s: %g"), (latlon ? "meters" : "map units"), length);
}
if (vertices_opt->answer) {
vertices = atoi(vertices_opt->answer);
if (vertices < 2)
G_fatal_error(_("Number of vertices must be at least 2"));
}
Vect_set_open_level(2);
Vect_open_old2(&In, in_opt->answer, "", layer_opt->answer);
layer = Vect_get_field_number(&In, layer_opt->answer);
Vect_open_new(&Out, out_opt->answer, Vect_is_3d(&In));
Vect_copy_head_data(&In, &Out);
Vect_hist_copy(&In, &Out);
Vect_hist_command(&Out);
Vect_copy_tables(&In, &Out, layer);
Points = Vect_new_line_struct();
Points2 = Vect_new_line_struct();
Cats = Vect_new_cats_struct();
nlines = Vect_get_num_lines(&In);
for (line = 1; line <= nlines; line++) {
int ltype;
G_percent(line, nlines, 1);
if (!Vect_line_alive(&In, line))
continue;
ltype = Vect_read_line(&In, Points, Cats, line);
if (layer != -1 && !Vect_cat_get(Cats, layer, NULL))
continue;
if (ltype & GV_LINES) {
if (length > 0) {
double l, from, to, step;
l = line_length(Points);
if (l <= length) {
Vect_write_line(&Out, ltype, Points, Cats);
}
else {
int n, i;
n = ceil(l / length);
if (latlon)
l = Vect_line_length(Points);
step = l / n;
from = 0.;
for (i = 0; i < n; i++) {
int ret;
double x, y, z;
if (i == n - 1) {
to = l; /* to be sure that it goes to end */
}
else {
to = from + step;
}
ret = Vect_line_segment(Points, from, to, Points2);
if (ret == 0) {
G_warning(_("Unable to make line segment: %f - %f (line length = %f)"),
from, to, l);
continue;
}
/* To be sure that the coordinates are identical */
if (i > 0) {
Points2->x[0] = x;
Points2->y[0] = y;
Points2->z[0] = z;
}
if (i == n - 1) {
Points2->x[Points2->n_points - 1] =
Points->x[Points->n_points - 1];
Points2->y[Points2->n_points - 1] =
Points->y[Points->n_points - 1];
Points2->z[Points2->n_points - 1] =
Points->z[Points->n_points - 1];
}
Vect_write_line(&Out, ltype, Points2, Cats);
/* last point */
x = Points2->x[Points2->n_points - 1];
y = Points2->y[Points2->n_points - 1];
z = Points2->z[Points2->n_points - 1];
from += step;
}
}
}
else {
int start = 0; /* number of coordinates written */
while (start < Points->n_points - 1) {
int i, v;
Vect_reset_line(Points2);
for (i = 0; i < vertices; i++) {
v = start + i;
if (v == Points->n_points)
break;
Vect_append_point(Points2, Points->x[v], Points->y[v],
Points->z[v]);
}
Vect_write_line(&Out, ltype, Points2, Cats);
start = v;
}
}
}
else {
Vect_write_line(&Out, ltype, Points, Cats);
}
}
Vect_close(&In);
Vect_build(&Out);
Vect_close(&Out);
exit(EXIT_SUCCESS);
}
