C++ (Cpp) WD2793 Examples

Example #1

File: opus.cpp Project: MASHinfo/mame

void bbc_opus2793_device::device_add_mconfig(machine_config &config)
{
	WD2793(config, m_fdc, 16_MHz_XTAL / 16);
	m_fdc->drq_wr_callback().set(FUNC(bbc_opusfdc_device::fdc_drq_w));
	m_fdc->hld_wr_callback().set(FUNC(bbc_opusfdc_device::motor_w));

	FLOPPY_CONNECTOR(config, m_floppy0, bbc_floppies_525, "525qd", bbc_opusfdc_device::floppy_formats).enable_sound(true);
	FLOPPY_CONNECTOR(config, m_floppy1, bbc_floppies_525, "525qd", bbc_opusfdc_device::floppy_formats).enable_sound(true);
}

Example #2

File: e01.cpp Project: MoochMcGee/mame

void econet_e01_device::device_add_mconfig(machine_config &config)
{
	// basic machine hardware
	M65C02(config, m_maincpu, XTAL(8'000'000)/4); // Rockwell R65C102P3
	m_maincpu->set_addrmap(AS_PROGRAM, &econet_e01_device::e01_mem);

	MC146818(config, m_rtc, 32.768_kHz_XTAL);
	m_rtc->irq().set(FUNC(econet_e01_device::rtc_irq_w));

	// devices
	via6522_device &via(VIA6522(config, R6522_TAG, 8_MHz_XTAL / 4));
	via.writepa_handler().set("cent_data_out", FUNC(output_latch_device::bus_w));
	via.irq_handler().set(FUNC(econet_e01_device::via_irq_w));

	MC6854(config, m_adlc, 0);
	m_adlc->out_irq_cb().set(FUNC(econet_e01_device::adlc_irq_w));
	m_adlc->out_txd_cb().set(FUNC(econet_e01_device::econet_data_w));

	WD2793(config, m_fdc, 8_MHz_XTAL / 4);
	m_fdc->intrq_wr_callback().set(FUNC(econet_e01_device::fdc_irq_w));
	m_fdc->drq_wr_callback().set(FUNC(econet_e01_device::fdc_drq_w));

	for (int i = 0; i < 2; i++)
	{
		FLOPPY_CONNECTOR(config, m_floppy[i]);
		m_floppy[i]->option_add("35dd", FLOPPY_35_DD);
		m_floppy[i]->set_default_option("35dd");
		m_floppy[i]->set_formats(floppy_formats_afs);
	}

	software_list_device &softlist(SOFTWARE_LIST(config, "flop_ls_e01"));
	softlist.set_type("e01_flop", SOFTWARE_LIST_ORIGINAL_SYSTEM);

	CENTRONICS(config, m_centronics, centronics_devices, "printer");
	m_centronics->ack_handler().set(R6522_TAG, FUNC(via6522_device::write_ca1));

	output_latch_device &cent_data_out(OUTPUT_LATCH(config, "cent_data_out"));
	m_centronics->set_output_latch(cent_data_out);

	SCSI_PORT(config, m_scsibus);
	m_scsibus->set_data_input_buffer(m_scsi_data_in);
	m_scsibus->msg_handler().set(m_scsi_ctrl_in, FUNC(input_buffer_device::write_bit0));
	m_scsibus->bsy_handler().set(FUNC(econet_e01_device::scsi_bsy_w)); // bit1
	// bit 2 0
	// bit 3 0
	// bit 4 NIRQ
	m_scsibus->req_handler().set(FUNC(econet_e01_device::scsi_req_w)); // bit5
	m_scsibus->io_handler().set(m_scsi_ctrl_in, FUNC(input_buffer_device::write_bit6));
	m_scsibus->cd_handler().set(m_scsi_ctrl_in, FUNC(input_buffer_device::write_bit7));
	m_scsibus->set_slot_device(1, "harddisk", SCSIHD, DEVICE_INPUT_DEFAULTS_NAME(SCSI_ID_0));

	OUTPUT_LATCH(config, m_scsi_data_out);
	m_scsibus->set_output_latch(*m_scsi_data_out);

	INPUT_BUFFER(config, m_scsi_data_in);
	INPUT_BUFFER(config, m_scsi_ctrl_in);

	// internal ram
	RAM(config, m_ram);
	m_ram->set_default_size("64K");
}