C++ (Cpp) WFConsoleReleaseConsoleMsg Examples

Example #1

File: drv_wifi_easy_config.c Project: ctapang/v0_70_01b

 void WFDisplayScanMgr(void)
{
    DRV_WIFI_SCAN_RESULT   bssDesc;
    char ssid[32+1];
    char buf[10];
    int i;
    char rssiChan[48];

    if ((SCANCXT.numScanResults == 0)               ||
        (!IS_SCAN_STATE_DISPLAY(SCANCXT.scanState)) ||
        (IS_SCAN_IN_PROGRESS(SCANCXT.scanState))    ||
        (!IS_SCAN_STATE_VALID(SCANCXT.scanState)))
    {
       SCAN_CLEAR_DISPLAY(SCANCXT.scanState); 
       return;
    }

    WFRetrieveScanResult(SCANCXT.displayIdx, &bssDesc);

    /* Display SSID */
    for(i=0;i<32;i++) ssid[i] = bssDesc.ssid[i];
    ssid[32] = 0;
    if(bssDesc.ssidLen<32) ssid[bssDesc.ssidLen] = 0;

    sprintf(buf,"%d  ",SCANCXT.displayIdx+1);
    SYS_CONSOLE_MESSAGE(buf);
    SYS_CONSOLE_MESSAGE("SSID:");
    SYS_CONSOLE_MESSAGE(ssid);
    SYS_CONSOLE_MESSAGE("\r\n");

    /* Display SSID  & Channel */
    /* RSSI_MAX : 200, RSSI_MIN : 106 */
    sprintf(rssiChan, "  => RSSI: %u, Channel: %u\r\n", bssDesc.rssi, bssDesc.channel);
    SYS_CONSOLE_MESSAGE(rssiChan);

    #if (WF_DEFAULT_NETWORK_TYPE == DRV_WIFI_NETWORK_TYPE_SOFT_AP) || (DRV_WIFI_DEFAULT_ADHOC_PRESCAN == DRV_WIFI_ENABLED)
        preScanResult[SCANCXT.displayIdx]= bssDesc;    // WF_PRESCAN
        if (SCANCXT.displayIdx == sizeof(preScanResult) / sizeof(preScanResult[0]) - 1) {
            SCAN_CLEAR_DISPLAY(SCANCXT.scanState);
            SCANCXT.displayIdx = 0;
            #if defined(CMD_PARSER)
            WFConsoleReleaseConsoleMsg();
            #endif
        }
    #endif

    if (++SCANCXT.displayIdx == SCANCXT.numScanResults)  
    {
        SCAN_CLEAR_DISPLAY(SCANCXT.scanState);
        SCANCXT.displayIdx = 0;
        #if defined(CMD_PARSER)
        WFConsoleReleaseConsoleMsg();
        #endif
    }
}

Example #2

extern void
WFDisplayScanMgr()
{
    tWFScanResult   bssDesc;
    char ssid[32];

    if (!IS_SCAN_STATE_DISPLAY(SCANCXT.scanState))
       return;

    if (IS_SCAN_IN_PROGRESS(SCANCXT.scanState))
       return;

    if (!IS_SCAN_STATE_VALID(SCANCXT.scanState))
       return;

    WFRetrieveScanResult(SCANCXT.displayIdx, &bssDesc);

    /* Display SSID */
    sprintf(ssid, "%s\r\n", bssDesc.ssid);
    putsUART(ssid);

    if (++SCANCXT.displayIdx == SCANCXT.numScanResults)  {
        SCAN_CLEAR_DISPLAY(SCANCXT.scanState);
        SCANCXT.displayIdx = 0;
#if defined(WF_CONSOLE)
        WFConsoleReleaseConsoleMsg();
#endif
    }

    return;
}

Example #3

File: WFConsole.c Project: Fontys-elektrotechniek/Eco-trafficlights-ethernet

/*****************************************************************************
 * FUNCTION: WFConsoleProcessEpilogue
 *
 * RETURNS: None
 *
 * PARAMS:  None
 *
 * NOTES:   Check if there is a left console msg, and release it if found.
 *
 *****************************************************************************/
void WFConsoleProcessEpilogue(void)
{
    if (WFConsoleIsConsoleMsgReceived())
	{
		if ( memcmppgm2ram(ARGV[0], "help", 4) != 0 )
		{
			WFConsolePrintRomStr("Unknown cmd: ", FALSE);
			WFConsolePrintRamStr(ARGV[0], TRUE);
		}

	    WFConsoleReleaseConsoleMsg();
	}
}

Example #4

File: WFConsole.c Project: Bobeye/cta2045-wifi-modules

/*****************************************************************************
 * FUNCTION: WFConsoleProcessEpilogue
 *
 * RETURNS: None
 *
 * PARAMS:  None
 *
 * NOTES:   Check if there is a left console msg, and release it if found.
 *
 *****************************************************************************/
void WFConsoleProcessEpilogue(void)
{
    if (WFConsoleIsConsoleMsgReceived())
    {
#if defined(WF_EASY_CONFIG_DEMO) && !defined(__C32__)
        putrsUART("Iperf supports only PIC32 for EasyConfig\n\r");
#else
        if (( memcmppgm2ram(ARGV[0], "iperf", 5) == 0 ) || ( memcmppgm2ram(ARGV[0], "kill", 4) == 0 ))
        {
            return;
        }
#endif
        if ( memcmppgm2ram(ARGV[0], "help", 4) != 0 )
        {
            WFConsolePrintRomStr("Unknown cmd: ", FALSE);
            WFConsolePrintRamStr(ARGV[0], TRUE);
        }
            
        WFConsoleReleaseConsoleMsg();
    }
}

Example #5

File: WFEasyConfig.c Project: AleSuky/SkP32v1.1

extern void
WFDisplayScanMgr()
{
    tWFScanResult   bssDesc;
    char ssid[32];
	char rssiChan[48];

    if (SCANCXT.numScanResults == 0)
       return;
    if (!IS_SCAN_STATE_DISPLAY(SCANCXT.scanState))
       return;

    if (IS_SCAN_IN_PROGRESS(SCANCXT.scanState))
       return;

    if (!IS_SCAN_STATE_VALID(SCANCXT.scanState))
       return;

    WFRetrieveScanResult(SCANCXT.displayIdx, &bssDesc);

    /* Display SSID */
    sprintf(ssid, "%s\r\n", bssDesc.ssid);
    putsUART(ssid);

	/* Display SSID  & Channel */
    /* RSSI_MAX : 200, RSSI_MIN : 106 */
    sprintf(rssiChan, "  => RSSI: %u, Channel: %u\r\n", bssDesc.rssi, bssDesc.channel);
    putsUART(rssiChan);

    if (++SCANCXT.displayIdx == SCANCXT.numScanResults)  {
        SCAN_CLEAR_DISPLAY(SCANCXT.scanState);
        SCANCXT.displayIdx = 0;
#if defined(WF_CONSOLE)
        WFConsoleReleaseConsoleMsg();
#endif
    }

    return;
}

Example #6

File: drv_wifi_easy_config.c Project: szkulisz/EAR_V2

void WFDisplayScanMgr()
{
    tWFScanResult   bssDesc;
    char ssid[WF_MAX_SSID_LENGTH+1];
    char rssiChan[48];
    int    i;
    char    st[80];

    if (SCANCXT.numScanResults == 0) {
       SCAN_CLEAR_DISPLAY(SCANCXT.scanState);
       return;
    }
    if (!IS_SCAN_STATE_DISPLAY(SCANCXT.scanState))
       return;

    if (IS_SCAN_IN_PROGRESS(SCANCXT.scanState))
       return;

    if (!IS_SCAN_STATE_VALID(SCANCXT.scanState))
       return;

    WFRetrieveScanResult(SCANCXT.displayIdx, &bssDesc);
    sprintf(st,"%3d ",SCANCXT.displayIdx);
    putrsUART(st);

    if (bssDesc.bssType == 1)
        sprintf(st,"NetType: Infra.");
    else if (bssDesc.bssType == 2)
        sprintf(st,"NetType: Ad-hoc");
    putrsUART(st);

    sprintf(st,", ESSID:");
    putrsUART(st);

    /* Display SSID */
    for(i=0;i<bssDesc.ssidLen;i++) ssid[i] = bssDesc.ssid[i];
    ssid[bssDesc.ssidLen] = 0;
    putsUART(ssid);
    putrsUART("\r\n");

    /* Display SSID  & Channel */
#ifdef STACK_USE_CERTIFICATE_DEBUG
    sprintf(rssiChan, "\tRSSI: %3u, Channel: %2u", bssDesc.rssi, bssDesc.channel);
        putsUART(rssiChan);
    /* Display BSSID */
    sprintf(rssiChan, ", BSSID: %02x:%02x:%02x:%02x:%02x:%02x",
                 bssDesc.bssid[0],bssDesc.bssid[1],bssDesc.bssid[2],
                 bssDesc.bssid[3],bssDesc.bssid[4],bssDesc.bssid[5]);
    putsUART(rssiChan);
    /* Display Security Mode */
    if((bssDesc.apConfig & 0x10) == 0)    // bit4==0:   open (no security)
    {
        sprintf(rssiChan, ", SecMode: %s\r\n", "Open");
    }
    else    // bit4== 1:    security
    {
        if ((bssDesc.apConfig & 0xc0) == 0xc0) // bit7 ==  1: WPA2, bit6 == 1: WPA
        {
            sprintf(rssiChan, ", SecMode: %s\r\n", "WPA/WPA2");
        }
        else if ((bssDesc.apConfig & 0x80) == 0x80) // bit7 ==  1: WPA2
        {
            sprintf(rssiChan, ", SecMode: %s\r\n", "WPA2");
        }
        else if((bssDesc.apConfig & 0x40) == 0x40)//bit6==1: WPA
        {
            sprintf(rssiChan, ", SecMode: %s\r\n", "WPA");
        }
        else    // bit7==0, bit6==0, WEP
        {
            sprintf(rssiChan, ", SecMode: %s\r\n", "WEP");
        }
    }
    putsUART(rssiChan);
#else
    sprintf(rssiChan, ", RSSI: %u, Channel: %u\r\n", bssDesc.rssi, bssDesc.channel);
        putsUART(rssiChan);
#endif

#if (MY_DEFAULT_NETWORK_TYPE == WF_SOFT_AP)
    preScanResult[SCANCXT.displayIdx]= bssDesc;    // WF_PRESCAN
    if (SCANCXT.displayIdx == sizeof(preScanResult) / sizeof(preScanResult[0]) - 1) {
        SCAN_CLEAR_DISPLAY(SCANCXT.scanState);
        SCANCXT.displayIdx = 0;
        #if defined(WF_CONSOLE) & defined(STACK_USE_UART)
        WFConsoleReleaseConsoleMsg();
        #endif
    }
#endif

    if (++SCANCXT.displayIdx == SCANCXT.numScanResults)  {
        SCAN_CLEAR_DISPLAY(SCANCXT.scanState);
        SCANCXT.displayIdx = 0;
#if defined(WF_CONSOLE) & defined(STACK_USE_UART)
        WFConsoleReleaseConsoleMsg();
#endif
    }

    return;
}

Example #7

File: WFEasyConfig.c Project: amdreallyfast/MPLAB_X_experiments

void WFDisplayScanMgr()
{
    tWFScanResult   bssDesc;
    char ssid[80];
    char rssiChan[48];
    int    count;

    if (SCANCXT.numScanResults == 0)
       return;
    if (!IS_SCAN_STATE_DISPLAY(SCANCXT.scanState))
       return;

    if (IS_SCAN_IN_PROGRESS(SCANCXT.scanState))
       return;

    if (!IS_SCAN_STATE_VALID(SCANCXT.scanState))
       return;

    WFRetrieveScanResult(SCANCXT.displayIdx, &bssDesc);

    /* Display SSID */
    count = SCANCXT.displayIdx + 1;
    sprintf(ssid, "%d SSID: %s\r\n", count, bssDesc.ssid);
    putsUART(ssid);

    /* Display SSID  & Channel */
    /* RSSI_MAX : 200, RSSI_MIN : 106 */
#ifdef STACK_USE_CERTIFATE_DEBUG	
	sprintf(rssiChan, "  => RSSI: %u, Channel: %u", bssDesc.rssi, bssDesc.channel);
    putsUART(rssiChan);
	/* Display BSSID */
	sprintf(rssiChan, " , BSSID: %02x:%02x:%02x:%02x:%02x:%02x ,", 
				 bssDesc.bssid[0],bssDesc.bssid[1],bssDesc.bssid[2],
				 bssDesc.bssid[3],bssDesc.bssid[4],bssDesc.bssid[5]);
	putsUART(rssiChan);
	/* Display Security Mode */
	if((bssDesc.apConfig & 0x10) == 0)	  // bit4==0:	open (no security)
	{
		sprintf(rssiChan, "Security mode: %s\r\n", "Open");
	}
	else								 // bit4== 1:	security
	{			 
		if ((bssDesc.apConfig & 0x80) == 0x80) // bit7 ==  1: WPA2
		{
			sprintf(rssiChan, "Security mode: %s\r\n", "WPA2");
		}
		else if((bssDesc.apConfig & 0x40) == 0x40)//bit6==1: WPA
		{
			sprintf(rssiChan, "Security mode: %s\r\n", "WPA");
		}
		else									  // bit7==0, bit6 ==0, WEP
		{
			sprintf(rssiChan, "Security mode: %s\r\n", "WEP");
		}
	}
	putsUART(rssiChan);
#else
	sprintf(rssiChan, "  => RSSI: %u, Channel: %u\r\n", bssDesc.rssi, bssDesc.channel);
    putsUART(rssiChan);
#endif

#if (MY_DEFAULT_NETWORK_TYPE == WF_SOFT_AP) 		
	preScanResult[SCANCXT.displayIdx]= bssDesc;    // WF_PRESCAN
#endif

    if (++SCANCXT.displayIdx == SCANCXT.numScanResults)  {
        SCAN_CLEAR_DISPLAY(SCANCXT.scanState);
        SCANCXT.displayIdx = 0;
#if defined(WF_CONSOLE) & defined(STACK_USE_UART)
        WFConsoleReleaseConsoleMsg();
#endif
    }

    return;
}

Example #8

File: wf_easy_config.c Project: dakkanner/cst-417-lab

 void WFDisplayScanMgr(void)
{
    t_wfScanResult   bssDesc;
    char st[80];
    int i;
	
    if ((SCANCXT.numScanResults == 0)               ||
        (!IS_SCAN_STATE_DISPLAY(SCANCXT.scanState)) ||
        (IS_SCAN_IN_PROGRESS(SCANCXT.scanState))    ||
        (!IS_SCAN_STATE_VALID(SCANCXT.scanState)))
    {
       return;
    }

    WFRetrieveScanResult(SCANCXT.displayIdx, &bssDesc);

    /* Display SSID */
    sprintf(st,"%2d ",SCANCXT.displayIdx);
    SYS_CONSOLE_MESSAGE(st);
    SYS_CONSOLE_MESSAGE("SSID: ");
    for(i = 0; i < bssDesc.ssidLen; i++) st[i] = bssDesc.ssid[i];
    st[bssDesc.ssidLen]=0;
    SYS_CONSOLE_MESSAGE(st);
    SYS_CONSOLE_MESSAGE("\r\n");


    /* Display BSSID */
    SYS_CONSOLE_MESSAGE("   BSSID: ");
    for(i = 0; i < WF_BSSID_LENGTH; i++)
    {
        if (i < 5)
        {
            sprintf(st, "%02X:", bssDesc.bssid[i]);
            SYS_CONSOLE_MESSAGE(st);
        }
        else
        {
            sprintf(st, "%02X, ", bssDesc.bssid[i]);
            SYS_CONSOLE_MESSAGE(st);
        }
    }
    /* Display network mode*/
    if (bssDesc.bssType == WF_NETWORK_TYPE_INFRASTRUCTURE)
        SYS_CONSOLE_MESSAGE("Network Mode: Infra, ");
    else if (bssDesc.bssType == WF_NETWORK_TYPE_ADHOC)
        SYS_CONSOLE_MESSAGE("Network Mode: Adhoc, ");

    /* Display RSSI  & Channel */
    sprintf(st, "RSSI: %3u, Channel: %2u\r\n", bssDesc.rssi, bssDesc.channel);
    SYS_CONSOLE_MESSAGE(st);

    #if (WF_DEFAULT_NETWORK_TYPE == WF_NETWORK_TYPE_SOFT_AP)
        preScanResult[SCANCXT.displayIdx]= bssDesc;    // WF_PRESCAN
    #endif

    if (++SCANCXT.displayIdx == SCANCXT.numScanResults)  
    {
        SCAN_CLEAR_DISPLAY(SCANCXT.scanState);
        SCANCXT.displayIdx = 0;
        #if defined(CMD_PARSER)
            WFConsoleReleaseConsoleMsg();
        #endif
    }
}