#include <linux/pinctrl/pinctrl.h>
#include <linux/platform_device.h>
#include <linux/slab.h>
#include "pinctrl-wmt.h"
/*
* Describe the register offsets within the GPIO memory space
* The dedicated external GPIO's should always be listed in bank 0
* so they are exported in the 0..31 range which is what users
* expect.
*
* Do not reorder these banks as it will change the pin numbering
*/
static const struct wmt_pinctrl_bank_registers wm8750_banks[] = {
WMT_PINCTRL_BANK(0x40, 0x80, 0xC0, 0x00, 0x480, 0x4C0), /* 0 */
WMT_PINCTRL_BANK(0x44, 0x84, 0xC4, 0x04, 0x484, 0x4C4), /* 1 */
WMT_PINCTRL_BANK(0x48, 0x88, 0xC8, 0x08, 0x488, 0x4C8), /* 2 */
WMT_PINCTRL_BANK(0x4C, 0x8C, 0xCC, 0x0C, 0x48C, 0x4CC), /* 3 */
WMT_PINCTRL_BANK(0x50, 0x90, 0xD0, 0x10, 0x490, 0x4D0), /* 4 */
WMT_PINCTRL_BANK(0x54, 0x94, 0xD4, 0x14, 0x494, 0x4D4), /* 5 */
WMT_PINCTRL_BANK(0x58, 0x98, 0xD8, 0x18, 0x498, 0x4D8), /* 6 */
WMT_PINCTRL_BANK(0x5C, 0x9C, 0xDC, 0x1C, 0x49C, 0x4DC), /* 7 */
WMT_PINCTRL_BANK(0x60, 0xA0, 0xE0, 0x20, 0x4A0, 0x4E0), /* 8 */
WMT_PINCTRL_BANK(0x70, 0xB0, 0xF0, 0x30, 0x4B0, 0x4F0), /* 9 */
WMT_PINCTRL_BANK(0x7C, 0xBC, 0xDC, 0x3C, 0x4BC, 0x4FC), /* 10 */
};
/* Please keep sorted by bank/bit */
#define WMT_PIN_EXTGPIO0 WMT_PIN(0, 0)
#define WMT_PIN_EXTGPIO1 WMT_PIN(0, 1)
#include <linux/pinctrl/pinctrl.h>
#include <linux/platform_device.h>
#include <linux/slab.h>
#include "pinctrl-wmt.h"
/*
* Describe the register offsets within the GPIO memory space
* The dedicated external GPIO's should always be listed in bank 0
* so they are exported in the 0..31 range which is what users
* expect.
*
* Do not reorder these banks as it will change the pin numbering
*/
static const struct wmt_pinctrl_bank_registers wm8505_banks[] = {
WMT_PINCTRL_BANK(0x64, 0x8C, 0xB4, 0xDC, NO_REG, NO_REG), /* 0 */
WMT_PINCTRL_BANK(0x40, 0x68, 0x90, 0xB8, NO_REG, NO_REG), /* 1 */
WMT_PINCTRL_BANK(0x44, 0x6C, 0x94, 0xBC, NO_REG, NO_REG), /* 2 */
WMT_PINCTRL_BANK(0x48, 0x70, 0x98, 0xC0, NO_REG, NO_REG), /* 3 */
WMT_PINCTRL_BANK(0x4C, 0x74, 0x9C, 0xC4, NO_REG, NO_REG), /* 4 */
WMT_PINCTRL_BANK(0x50, 0x78, 0xA0, 0xC8, NO_REG, NO_REG), /* 5 */
WMT_PINCTRL_BANK(0x54, 0x7C, 0xA4, 0xD0, NO_REG, NO_REG), /* 6 */
WMT_PINCTRL_BANK(0x58, 0x80, 0xA8, 0xD4, NO_REG, NO_REG), /* 7 */
WMT_PINCTRL_BANK(0x5C, 0x84, 0xAC, 0xD8, NO_REG, NO_REG), /* 8 */
WMT_PINCTRL_BANK(0x60, 0x88, 0xB0, 0xDC, NO_REG, NO_REG), /* 9 */
WMT_PINCTRL_BANK(0x500, 0x504, 0x508, 0x50C, NO_REG, NO_REG), /* 10 */
};
/* Please keep sorted by bank/bit */
#define WMT_PIN_EXTGPIO0 WMT_PIN(0, 0)
#define WMT_PIN_EXTGPIO1 WMT_PIN(0, 1)
#include <linux/pinctrl/pinctrl.h>
#include <linux/platform_device.h>
#include <linux/slab.h>
#include "pinctrl-wmt.h"
/*
* Describe the register offsets within the GPIO memory space
* The dedicated external GPIO's should always be listed in bank 0
* so they are exported in the 0..31 range which is what users
* expect.
*
* Do not reorder these banks as it will change the pin numbering
*/
static const struct wmt_pinctrl_bank_registers wm8650_banks[] = {
WMT_PINCTRL_BANK(0x40, 0x80, 0xC0, 0x00, 0x480, 0x4C0), /* 0 */
WMT_PINCTRL_BANK(0x44, 0x84, 0xC4, 0x04, 0x484, 0x4C4), /* 1 */
WMT_PINCTRL_BANK(0x48, 0x88, 0xC8, 0x08, 0x488, 0x4C8), /* 2 */
WMT_PINCTRL_BANK(0x4C, 0x8C, 0xCC, 0x0C, 0x48C, 0x4CC), /* 3 */
WMT_PINCTRL_BANK(0x50, 0x90, 0xD0, 0x10, 0x490, 0x4D0), /* 4 */
WMT_PINCTRL_BANK(0x54, 0x94, 0xD4, 0x14, 0x494, 0x4D4), /* 5 */
WMT_PINCTRL_BANK(0x58, 0x98, 0xD8, 0x18, 0x498, 0x4D8), /* 6 */
WMT_PINCTRL_BANK(0x5C, 0x9C, 0xDC, 0x1C, 0x49C, 0x4DC), /* 7 */
};
/* Please keep sorted by bank/bit */
#define WMT_PIN_EXTGPIO0 WMT_PIN(0, 0)
#define WMT_PIN_EXTGPIO1 WMT_PIN(0, 1)
#define WMT_PIN_EXTGPIO2 WMT_PIN(0, 2)
#define WMT_PIN_EXTGPIO3 WMT_PIN(0, 3)
#define WMT_PIN_EXTGPIO4 WMT_PIN(0, 4)
