/*
* Searching backward from start to limit, find the first block whose
* allocated/free state is different from start's.
*/
int
xfs_rtfind_back(
xfs_mount_t *mp, /* file system mount point */
xfs_trans_t *tp, /* transaction pointer */
xfs_rtblock_t start, /* starting block to look at */
xfs_rtblock_t limit, /* last block to look at */
xfs_rtblock_t *rtblock) /* out: start block found */
{
xfs_rtword_t *b; /* current word in buffer */
int bit; /* bit number in the word */
xfs_rtblock_t block; /* bitmap block number */
xfs_buf_t *bp; /* buf for the block */
xfs_rtword_t *bufp; /* starting word in buffer */
int error; /* error value */
xfs_rtblock_t firstbit; /* first useful bit in the word */
xfs_rtblock_t i; /* current bit number rel. to start */
xfs_rtblock_t len; /* length of inspected area */
xfs_rtword_t mask; /* mask of relevant bits for value */
xfs_rtword_t want; /* mask for "good" values */
xfs_rtword_t wdiff; /* difference from wanted value */
int word; /* word number in the buffer */
/*
* Compute and read in starting bitmap block for starting block.
*/
block = XFS_BITTOBLOCK(mp, start);
error = xfs_rtbuf_get(mp, tp, block, 0, &bp);
if (error) {
return error;
}
bufp = bp->b_addr;
/*
* Get the first word's index & point to it.
*/
word = XFS_BITTOWORD(mp, start);
b = &bufp[word];
bit = (int)(start & (XFS_NBWORD - 1));
len = start - limit + 1;
/*
* Compute match value, based on the bit at start: if 1 (free)
* then all-ones, else all-zeroes.
*/
want = (*b & ((xfs_rtword_t)1 << bit)) ? -1 : 0;
/*
* If the starting position is not word-aligned, deal with the
* partial word.
*/
if (bit < XFS_NBWORD - 1) {
/*
* Calculate first (leftmost) bit number to look at,
* and mask for all the relevant bits in this word.
*/
firstbit = XFS_RTMAX((xfs_srtblock_t)(bit - len + 1), 0);
mask = (((xfs_rtword_t)1 << (bit - firstbit + 1)) - 1) <<
firstbit;
/*
* Calculate the difference between the value there
* and what we're looking for.
*/
if ((wdiff = (*b ^ want) & mask)) {
/*
* Different. Mark where we are and return.
*/
xfs_trans_brelse(tp, bp);
i = bit - XFS_RTHIBIT(wdiff);
*rtblock = start - i + 1;
return 0;
}
i = bit - firstbit + 1;
/*
* Go on to previous block if that's where the previous word is
* and we need the previous word.
*/
if (--word == -1 && i < len) {
/*
* If done with this block, get the previous one.
*/
xfs_trans_brelse(tp, bp);
error = xfs_rtbuf_get(mp, tp, --block, 0, &bp);
if (error) {
return error;
}
bufp = bp->b_addr;
word = XFS_BLOCKWMASK(mp);
b = &bufp[word];
} else {
/*
* Go on to the previous word in the buffer.
*/
b--;
}
} else {
/*
* Starting on a word boundary, no partial word.
*/
i = 0;
}
/*
* Loop over whole words in buffers. When we use up one buffer
* we move on to the previous one.
*/
while (len - i >= XFS_NBWORD) {
/*
* Compute difference between actual and desired value.
*/
if ((wdiff = *b ^ want)) {
/*
* Different, mark where we are and return.
*/
xfs_trans_brelse(tp, bp);
i += XFS_NBWORD - 1 - XFS_RTHIBIT(wdiff);
*rtblock = start - i + 1;
return 0;
}
i += XFS_NBWORD;
/*
* Go on to previous block if that's where the previous word is
* and we need the previous word.
*/
if (--word == -1 && i < len) {
/*
* If done with this block, get the previous one.
*/
xfs_trans_brelse(tp, bp);
error = xfs_rtbuf_get(mp, tp, --block, 0, &bp);
if (error) {
return error;
}
bufp = bp->b_addr;
word = XFS_BLOCKWMASK(mp);
b = &bufp[word];
} else {
/*
* Go on to the previous word in the buffer.
*/
b--;
}
}
/*
* If not ending on a word boundary, deal with the last
* (partial) word.
*/
if (len - i) {
/*
* Calculate first (leftmost) bit number to look at,
* and mask for all the relevant bits in this word.
*/
firstbit = XFS_NBWORD - (len - i);
mask = (((xfs_rtword_t)1 << (len - i)) - 1) << firstbit;
/*
* Compute difference between actual and desired value.
*/
if ((wdiff = (*b ^ want) & mask)) {
/*
* Different, mark where we are and return.
*/
xfs_trans_brelse(tp, bp);
i += XFS_NBWORD - 1 - XFS_RTHIBIT(wdiff);
*rtblock = start - i + 1;
return 0;
} else
i = len;
}
/*
* No match, return that we scanned the whole area.
*/
xfs_trans_brelse(tp, bp);
*rtblock = start - i + 1;
return 0;
}
/*
* Allocate an extent of length minlen<=len<=maxlen, with no position
* specified. If we don't get maxlen then use prod to trim
* the length, if given. The lengths are all in rtextents.
*/
STATIC int /* error */
xfs_rtallocate_extent_size(
xfs_mount_t *mp, /* file system mount point */
xfs_trans_t *tp, /* transaction pointer */
xfs_extlen_t minlen, /* minimum length to allocate */
xfs_extlen_t maxlen, /* maximum length to allocate */
xfs_extlen_t *len, /* out: actual length allocated */
xfs_buf_t **rbpp, /* in/out: summary block buffer */
xfs_fsblock_t *rsb, /* in/out: summary block number */
xfs_extlen_t prod, /* extent product factor */
xfs_rtblock_t *rtblock) /* out: start block allocated */
{
int error; /* error value */
int i; /* bitmap block number */
int l; /* level number (loop control) */
xfs_rtblock_t n; /* next block to be tried */
xfs_rtblock_t r; /* result block number */
xfs_suminfo_t sum; /* summary information for extents */
ASSERT(minlen % prod == 0 && maxlen % prod == 0);
ASSERT(maxlen != 0);
/*
* Loop over all the levels starting with maxlen.
* At each level, look at all the bitmap blocks, to see if there
* are extents starting there that are long enough (>= maxlen).
* Note, only on the initial level can the allocation fail if
* the summary says there's an extent.
*/
for (l = xfs_highbit32(maxlen); l < mp->m_rsumlevels; l++) {
/*
* Loop over all the bitmap blocks.
*/
for (i = 0; i < mp->m_sb.sb_rbmblocks; i++) {
/*
* Get the summary for this level/block.
*/
error = xfs_rtget_summary(mp, tp, l, i, rbpp, rsb,
&sum);
if (error) {
return error;
}
/*
* Nothing there, on to the next block.
*/
if (!sum)
continue;
/*
* Try allocating the extent.
*/
error = xfs_rtallocate_extent_block(mp, tp, i, maxlen,
maxlen, len, &n, rbpp, rsb, prod, &r);
if (error) {
return error;
}
/*
* If it worked, return that.
*/
if (r != NULLRTBLOCK) {
*rtblock = r;
return 0;
}
/*
* If the "next block to try" returned from the
* allocator is beyond the next bitmap block,
* skip to that bitmap block.
*/
if (XFS_BITTOBLOCK(mp, n) > i + 1)
i = XFS_BITTOBLOCK(mp, n) - 1;
}
}
/*
* Didn't find any maxlen blocks. Try smaller ones, unless
* we're asking for a fixed size extent.
*/
if (minlen > --maxlen) {
*rtblock = NULLRTBLOCK;
return 0;
}
ASSERT(minlen != 0);
ASSERT(maxlen != 0);
/*
* Loop over sizes, from maxlen down to minlen.
* This time, when we do the allocations, allow smaller ones
* to succeed.
*/
for (l = xfs_highbit32(maxlen); l >= xfs_highbit32(minlen); l--) {
/*
* Loop over all the bitmap blocks, try an allocation
* starting in that block.
*/
for (i = 0; i < mp->m_sb.sb_rbmblocks; i++) {
/*
* Get the summary information for this level/block.
*/
error = xfs_rtget_summary(mp, tp, l, i, rbpp, rsb,
&sum);
if (error) {
return error;
}
/*
* If nothing there, go on to next.
*/
if (!sum)
continue;
/*
* Try the allocation. Make sure the specified
* minlen/maxlen are in the possible range for
* this summary level.
*/
error = xfs_rtallocate_extent_block(mp, tp, i,
XFS_RTMAX(minlen, 1 << l),
XFS_RTMIN(maxlen, (1 << (l + 1)) - 1),
len, &n, rbpp, rsb, prod, &r);
if (error) {
return error;
}
/*
* If it worked, return that extent.
*/
if (r != NULLRTBLOCK) {
*rtblock = r;
return 0;
}
/*
* If the "next block to try" returned from the
* allocator is beyond the next bitmap block,
* skip to that bitmap block.
*/
if (XFS_BITTOBLOCK(mp, n) > i + 1)
i = XFS_BITTOBLOCK(mp, n) - 1;
}
}
/*
* Got nothing, return failure.
*/
*rtblock = NULLRTBLOCK;
return 0;
}
