void main(void)
{
CLRWDT();
ENABLE_WDT();
currentPrimitive = NO_PRIMITIVE;
NetworkDescriptor = NULL;
orphanTries = 3;
// If you are going to send data to a terminal, initialize the UART.
ConsoleInit();
ConsolePutROMString( (ROM char *)"Universidade Paulista - UNIP\r\n" );
ConsolePutROMString( (ROM char *)"Daniel Gonçalves\r\n" );
ConsolePutROMString( (ROM char *)"Projeto: Baba Eletronica\r\n\r\n" );
ConsolePutROMString( (ROM char *)"\r\n\r\n\r\n*************************************\r\n" );
ConsolePutROMString( (ROM char *)"Microchip ZigBee(TM) Stack - v1.0-3.8\r\n\r\n" );
ConsolePutROMString( (ROM char *)"ZigBee RFD\r\n\r\n" );
ConsolePutROMString( (ROM char *)"Transceiver-MRF24J40\r\n\r\n" );
// Inicializa o Hardware
HardwareInit();
// Inicializa a pilha ZigBee
ZigBeeInit();
// *************************************************************************
// Outras Inicializações
// *************************************************************************
myStatusFlags.Val = STATUS_FLAGS_INIT;
// Endereço padrão do Coordenador
destinationAddress.Val = 0x0000;
// Inicializa os LEDS
MOVE_SENSOR_LED = ON;
LEVEL_SENSOR_LED = ON;
// Habilita as interrupções
RCONbits.IPEN = 1;
INTCONbits.GIEH = 1;
while (1)
{
CLRWDT();
ZigBeeTasks( ¤tPrimitive );
switch (currentPrimitive)
{
case NLME_NETWORK_DISCOVERY_confirm:
currentPrimitive = NO_PRIMITIVE;
if (!params.NLME_NETWORK_DISCOVERY_confirm.Status)
{
if (!params.NLME_NETWORK_DISCOVERY_confirm.NetworkCount)
{
ConsolePutROMString( (ROM char *)"No networks found. Trying again...\r\n" );
}
else
{
// Save the descriptor list pointer so we can destroy it later.
NetworkDescriptor = params.NLME_NETWORK_DISCOVERY_confirm.NetworkDescriptor;
// Select a network to try to join. We're not going to be picky right now...
currentNetworkDescriptor = NetworkDescriptor;
SubmitJoinRequest:
// not needed for new join params.NLME_JOIN_request.ScanDuration = ;
// not needed for new join params.NLME_JOIN_request.ScanChannels = ;
params.NLME_JOIN_request.PANId = currentNetworkDescriptor->PanID;
ConsolePutROMString( (ROM char *)"Network(s) found. Trying to join " );
PrintChar( params.NLME_JOIN_request.PANId.byte.MSB );
PrintChar( params.NLME_JOIN_request.PANId.byte.LSB );
ConsolePutROMString( (ROM char *)".\r\n" );
params.NLME_JOIN_request.JoinAsRouter = FALSE;
params.NLME_JOIN_request.RejoinNetwork = FALSE;
params.NLME_JOIN_request.PowerSource = NOT_MAINS_POWERED;
params.NLME_JOIN_request.RxOnWhenIdle = FALSE;
params.NLME_JOIN_request.MACSecurity = FALSE;
currentPrimitive = NLME_JOIN_request;
}
}
else
{
PrintChar( params.NLME_NETWORK_DISCOVERY_confirm.Status );
ConsolePutROMString( (ROM char *)" Error finding network. Trying again...\r\n" );
}
break;
case NLME_JOIN_confirm:
currentPrimitive = NO_PRIMITIVE;
if (!params.NLME_JOIN_confirm.Status)
{
ConsolePutROMString( (ROM char *)"Join successful!\r\n" );
// Free the network descriptor list, if it exists. If we joined as an orphan, it will be NULL.
while (NetworkDescriptor)
{
currentNetworkDescriptor = NetworkDescriptor->next;
free( NetworkDescriptor );
NetworkDescriptor = currentNetworkDescriptor;
}
}
else
{
PrintChar( params.NLME_JOIN_confirm.Status );
// If we were trying as an orphan, see if we have some more orphan attempts.
if (ZigBeeStatus.flags.bits.bTryOrphanJoin)
{
// If we tried to join as an orphan, we do not have NetworkDescriptor, so we do
// not have to free it.
ConsolePutROMString( (ROM char *)" Could not join as orphan. " );
orphanTries--;
if (orphanTries == 0)
{
ConsolePutROMString( (ROM char *)"Must try as new node...\r\n" );
ZigBeeStatus.flags.bits.bTryOrphanJoin = 0;
}
else
{
ConsolePutROMString( (ROM char *)"Trying again...\r\n" );
}
}
else
{
ConsolePutROMString( (ROM char *)" Could not join selected network. " );
currentNetworkDescriptor = currentNetworkDescriptor->next;
if (currentNetworkDescriptor)
{
ConsolePutROMString( (ROM char *)"Trying next discovered network...\r\n" );
goto SubmitJoinRequest;
}
else
{
// We ran out of descriptors. Free the network descriptor list, and fall
// through to try discovery again.
ConsolePutROMString( (ROM char *)"Cleaning up and retrying discovery...\r\n" );
while (NetworkDescriptor)
{
currentNetworkDescriptor = NetworkDescriptor->next;
free( NetworkDescriptor );
NetworkDescriptor = currentNetworkDescriptor;
}
}
}
}
break;
case NLME_LEAVE_indication:
if (!memcmppgm2ram( ¶ms.NLME_LEAVE_indication.DeviceAddress, (ROM void *)&macLongAddr, 8 ))
{
ConsolePutROMString( (ROM char *)"We have left the network.\r\n" );
}
else
{
ConsolePutROMString( (ROM char *)"Another node has left the network.\r\n" );
}
currentPrimitive = NO_PRIMITIVE;
break;
case NLME_RESET_confirm:
ConsolePutROMString( (ROM char *)"ZigBee Stack has been reset.\r\n" );
currentPrimitive = NO_PRIMITIVE;
break;
case NLME_SYNC_confirm:
switch (params.NLME_SYNC_confirm.Status)
{
case SUCCESS:
// I have heard from my parent, but it has no data for me. Note that
// if my parent has data for me, I will get an APSDE_DATA_indication.
ConsolePutROMString( (ROM char *)"No data available.\r\n" );
break;
case NWK_SYNC_FAILURE:
// I cannot communicate with my parent.
ConsolePutROMString( (ROM char *)"I cannot communicate with my parent.\r\n" );
break;
case NWK_INVALID_PARAMETER:
// If we call NLME_SYNC_request correctly, this doesn't occur.
ConsolePutROMString( (ROM char *)"Invalid sync parameter.\r\n" );
break;
}
currentPrimitive = NO_PRIMITIVE;
break;
case APSDE_DATA_indication:
{
WORD_VAL attributeId;
BYTE command;
BYTE data;
BYTE dataLength;
//BYTE dataType;
BYTE frameHeader;
BYTE sequenceNumber;
BYTE transaction;
BYTE transByte;
currentPrimitive = NO_PRIMITIVE;
frameHeader = APLGet();
switch (params.APSDE_DATA_indication.DstEndpoint)
{
case EP_ZDO:
ConsolePutROMString( (ROM char *)" Receiving ZDO cluster " );
PrintChar( params.APSDE_DATA_indication.ClusterId );
ConsolePutROMString( (ROM char *)"\r\n" );
// Put code here to handle any ZDO responses that we requested
if ((frameHeader & APL_FRAME_TYPE_MASK) == APL_FRAME_TYPE_MSG)
{
frameHeader &= APL_FRAME_COUNT_MASK;
for (transaction=0; transaction<frameHeader; transaction++)
{
sequenceNumber = APLGet();
dataLength = APLGet();
transByte = 1; // Account for status byte
switch( params.APSDE_DATA_indication.ClusterId )
{
// ********************************************************
// Put a case here to handle each ZDO response that we requested.
// ********************************************************
case NWK_ADDR_rsp:
if (APLGet() == SUCCESS)
{
ConsolePutROMString( (ROM char *)" Receiving NWK_ADDR_rsp.\r\n" );
// Skip over the IEEE address of the responder.
for (data=0; data<8; data++)
{
APLGet();
transByte++;
}
destinationAddress.byte.LSB = APLGet();
destinationAddress.byte.MSB = APLGet();
transByte += 2;
myStatusFlags.bits.bDestinationAddressKnown = 1;
}
break;
default:
break;
}
// Read out the rest of the MSG in case there is another transaction.
for (; transByte<dataLength; transByte++)
{
APLGet();
}
}
}
break;
// ************************************************************************
// Place a case for each user defined endpoint.
// ************************************************************************
case EP_LIGHT:
if ((frameHeader & APL_FRAME_TYPE_MASK) == APL_FRAME_TYPE_KVP)
{
frameHeader &= APL_FRAME_COUNT_MASK;
for (transaction=0; transaction<frameHeader; transaction++)
{
sequenceNumber = APLGet();
command = APLGet();
attributeId.byte.LSB = APLGet();
attributeId.byte.MSB = APLGet();
//dataType = command & APL_FRAME_DATA_TYPE_MASK;
command &= APL_FRAME_COMMAND_MASK;
if ((params.APSDE_DATA_indication.ClusterId == OnOffSRC_CLUSTER) &&
(attributeId.Val == OnOffSRC_OnOff))
{
if ((command == APL_FRAME_COMMAND_SET) ||
(command == APL_FRAME_COMMAND_SETACK))
{
// Prepare a response in case it is needed.
TxBuffer[TxData++] = APL_FRAME_TYPE_KVP | 1; // KVP, 1 transaction
TxBuffer[TxData++] = sequenceNumber;
TxBuffer[TxData++] = APL_FRAME_COMMAND_SET_RES | (APL_FRAME_DATA_TYPE_UINT8 << 4);
TxBuffer[TxData++] = attributeId.byte.LSB;
TxBuffer[TxData++] = attributeId.byte.MSB;
// Data type for this attibute must be APL_FRAME_DATA_TYPE_UINT8
data = APLGet();
switch (data)
{
case LIGHT_OFF:
ConsolePutROMString( (ROM char *)" Turning light off.\r\n" );
LEVEL_SENSOR_LED = 0;
TxBuffer[TxData++] = SUCCESS;
break;
case LIGHT_ON:
ConsolePutROMString( (ROM char *)" Turning light on.\r\n" );
LEVEL_SENSOR_LED = 1;
TxBuffer[TxData++] = SUCCESS;
break;
case LIGHT_TOGGLE:
ConsolePutROMString( (ROM char *)" Toggling light.\r\n" );
LEVEL_SENSOR_LED ^= 1;
TxBuffer[TxData++] = SUCCESS;
break;
default:
PrintChar( data );
ConsolePutROMString( (ROM char *)" Invalid light message.\r\n" );
TxBuffer[TxData++] = KVP_INVALID_ATTRIBUTE_DATA;
break;
}
}
if (command == APL_FRAME_COMMAND_SETACK)
{
// Send back an application level acknowledge.
ZigBeeBlockTx();
// Take care here that parameters are not overwritten before they are used.
// We can use the data byte as a temporary variable.
params.APSDE_DATA_request.DstAddrMode = params.APSDE_DATA_indication.SrcAddrMode;
params.APSDE_DATA_request.DstEndpoint = params.APSDE_DATA_indication.SrcEndpoint;
params.APSDE_DATA_request.DstAddress.ShortAddr = params.APSDE_DATA_indication.SrcAddress.ShortAddr;
//params.APSDE_DATA_request.asduLength; TxData
//params.APSDE_DATA_request.ProfileId; unchanged
params.APSDE_DATA_request.RadiusCounter = DEFAULT_RADIUS;
params.APSDE_DATA_request.DiscoverRoute = ROUTE_DISCOVERY_ENABLE;
#ifdef I_SUPPORT_SECURITY
params.APSDE_DATA_request.TxOptions.Val = 1;
#else
params.APSDE_DATA_request.TxOptions.Val = 0;
#endif
params.APSDE_DATA_request.SrcEndpoint = EP_LIGHT;
//params.APSDE_DATA_request.ClusterId; unchanged
currentPrimitive = APSDE_DATA_request;
}
else
{
// We are not sending an acknowledge, so reset the transmit message pointer.
TxData = TX_DATA_START;
}
}
// TODO read to the end of the transaction.
} // each transaction
} // frame type
break;
default:
break;
}
APLDiscardRx();
}
break;
case APSDE_DATA_confirm:
if (params.APSDE_DATA_confirm.Status)
{
ConsolePutROMString( (ROM char *)"Error " );
PrintChar( params.APSDE_DATA_confirm.Status );
ConsolePutROMString( (ROM char *)" sending message.\r\n" );
}
else
{
ConsolePutROMString( (ROM char *)" Message sent successfully.\r\n" );
}
currentPrimitive = NO_PRIMITIVE;
break;
case NO_PRIMITIVE:
if (!ZigBeeStatus.flags.bits.bNetworkJoined)
{
if (!ZigBeeStatus.flags.bits.bTryingToJoinNetwork)
{
if (ZigBeeStatus.flags.bits.bTryOrphanJoin)
{
ConsolePutROMString( (ROM char *)"Trying to join network as an orphan...\r\n" );
params.NLME_JOIN_request.JoinAsRouter = FALSE;
params.NLME_JOIN_request.RejoinNetwork = TRUE;
params.NLME_JOIN_request.PowerSource = NOT_MAINS_POWERED;
params.NLME_JOIN_request.RxOnWhenIdle = FALSE;
params.NLME_JOIN_request.MACSecurity = FALSE;
params.NLME_JOIN_request.ScanDuration = 8;
params.NLME_JOIN_request.ScanChannels.Val = ALLOWED_CHANNELS;
currentPrimitive = NLME_JOIN_request;
}
else
{
ConsolePutROMString( (ROM char *)"Trying to join network as a new device...\r\n" );
params.NLME_NETWORK_DISCOVERY_request.ScanDuration = 6;
params.NLME_NETWORK_DISCOVERY_request.ScanChannels.Val = ALLOWED_CHANNELS;
currentPrimitive = NLME_NETWORK_DISCOVERY_request;
}
}
}
else
{
// See if I can do my own internal tasks. We don't want to try to send a message
// if we just asked for one.
if (ZigBeeStatus.flags.bits.bDataRequestComplete && ZigBeeReady())
{
// ************************************************************************
// Place all processes that can send messages here. Be sure to call
// ZigBeeBlockTx() when currentPrimitive is set to APSDE_DATA_request.
// ************************************************************************
if ( myStatusFlags.bits.bMoveSensorButtonPressed)
{
// Send a light toggle message to the other node.
myStatusFlags.bits.bMoveSensorButtonPressed = FALSE;
BLINK_LED(MOVE_SENSOR_LED);
// envia a mensagem para ligar/desligar o led
RFDSendMessage(MoveSensor_Activated, 0x00);
}
else if (myStatusFlags.bits.bLevelSensorButtonPressed)
{
// Envia mensagem indicando que o sensor de nível foi acionado
myStatusFlags.bits.bLevelSensorButtonPressed = FALSE;
BLINK_LED(LEVEL_SENSOR_LED);
RFDSendMessage(LevelSensor_Activated, 0x00);
}
// We've processed any key press, so re-enable interrupts.
INTCONbits.RBIE = 1;
}
// If we don't have to execute a primitive, see if we need to request data from
// our parent, or if we can go to sleep.
if (currentPrimitive == NO_PRIMITIVE)
{
if (!ZigBeeStatus.flags.bits.bDataRequestComplete)
{
// We have not received all data from our parent. If we are not waiting
// for an answer from a data request, send a data request.
if (!ZigBeeStatus.flags.bits.bRequestingData)
{
if (ZigBeeReady())
{
// Our parent still may have data for us.
params.NLME_SYNC_request.Track = FALSE;
currentPrimitive = NLME_SYNC_request;
ConsolePutROMString( (ROM char *)"Requesting data...\r\n" );
}
}
}
else
{
if (!ZigBeeStatus.flags.bits.bHasBackgroundTasks && myProcessesAreDone())
{
// We do not have a primitive to execute, we've extracted all messages
// that our parent has for us, the stack has no background tasks,
// and all application-specific processes are complete. Now we can
// go to sleep. Make sure that the UART is finished, turn off the transceiver,
// and make sure that we wakeup from key press.
if(APLDisable() == TRUE)
{
ConsolePutROMString( (ROM char *)"Going to sleep...\r\n" );
while (!ConsoleIsPutReady());
APLDisable();
INTCONbits.RBIE = 1;
SLEEP();
NOP();
// We just woke up from sleep. Turn on the transceiver and
// request data from our parent.
APLEnable();
params.NLME_SYNC_request.Track = FALSE;
currentPrimitive = NLME_SYNC_request;
ConsolePutROMString( (ROM char *)"Requesting data...\r\n" );
}
}
}
}
}
break;
default:
PrintChar( currentPrimitive );
ConsolePutROMString( (ROM char *)" Unhandled primitive.\r\n" );
currentPrimitive = NO_PRIMITIVE;
}
// *********************************************************************
// Place any non-ZigBee related processing here. Be sure that the code
// will loop back and execute ZigBeeTasks() in a timely manner.
// *********************************************************************
}
}
void main(void)
{
CLRWDT();
ENABLE_WDT();
currentPrimitive = NO_PRIMITIVE;
NetworkDescriptor = NULL;
// If you are going to send data to a terminal, initialize the UART.
ConsoleInit();
// Initialize the hardware - must be done before initializing ZigBee.
HardwareInit();
// Initialize the ZigBee Stack.
ZigBeeInit();
// *************************************************************************
// Perform any other initialization here
// *************************************************************************
// Enable interrupts to get everything going.
IPEN = 1;
GIEH = 1;
while (1)
{
CLRWDT();
ZigBeeTasks( ¤tPrimitive );
switch (currentPrimitive)
{
case NLME_NETWORK_DISCOVERY_confirm:
currentPrimitive = NO_PRIMITIVE;
if (!params.NLME_NETWORK_DISCOVERY_confirm.Status)
{
if (!params.NLME_NETWORK_DISCOVERY_confirm.NetworkCount)
{
ConsolePutROMString( (ROM char *)"No networks found. Trying again...\r\n" );
}
else
{
// Save the descriptor list pointer so we can destroy it later.
NetworkDescriptor = params.NLME_NETWORK_DISCOVERY_confirm.NetworkDescriptor;
// Select a network to try to join. We're not going to be picky right now...
currentNetworkDescriptor = NetworkDescriptor;
// not needed for new join params.NLME_JOIN_request.ScanDuration = ;
// not needed for new join params.NLME_JOIN_request.ScanChannels = ;
params.NLME_JOIN_request.PANId = currentNetworkDescriptor->PanID;
params.NLME_JOIN_request.JoinAsRouter = FALSE;
params.NLME_JOIN_request.RejoinNetwork = FALSE;
params.NLME_JOIN_request.PowerSource = NOT_MAINS_POWERED;
params.NLME_JOIN_request.RxOnWhenIdle = FALSE;
params.NLME_JOIN_request.MACSecurity = FALSE;
currentPrimitive = NLME_JOIN_request;
ConsolePutROMString( (ROM char *)"Network(s) found. Trying to join " );
PrintChar( params.NLME_JOIN_request.PANId.byte.MSB );
PrintChar( params.NLME_JOIN_request.PANId.byte.LSB );
ConsolePutROMString( (ROM char *)".\r\n" );
}
}
else
{
PrintChar( params.NLME_NETWORK_DISCOVERY_confirm.Status );
ConsolePutROMString( (ROM char *)" Error finding network. Trying again...\r\n" );
}
break;
case NLME_JOIN_confirm:
currentPrimitive = NO_PRIMITIVE;
if (!params.NLME_JOIN_confirm.Status)
{
ConsolePutROMString( (ROM char *)"Join successful!\r\n" );
if (NetworkDescriptor)
{
// If we joined as an orphan, this will be NULL.
free( NetworkDescriptor );
}
// We are now on the network. Enable routing.
params.NLME_START_ROUTER_request.BeaconOrder = MAC_PIB_macBeaconOrder;
params.NLME_START_ROUTER_request.SuperframeOrder = MAC_PIB_macSuperframeOrder;
params.NLME_START_ROUTER_request.BatteryLifeExtension = FALSE;
currentPrimitive = NLME_START_ROUTER_request;
}
else
{
PrintChar( params.NLME_JOIN_confirm.Status );
ConsolePutROMString( (ROM char *)" Could not join. Trying again as new device..." );
}
break;
case NLME_LEAVE_indication:
if (!memcmppgm2ram( ¶ms.NLME_LEAVE_indication.DeviceAddress, (ROM void *)&macLongAddr, 8 ))
{
ConsolePutROMString( (ROM char *)"We have left the network.\r\n" );
}
else
{
ConsolePutROMString( (ROM char *)"Another node has left the network.\r\n" );
}
currentPrimitive = NO_PRIMITIVE;
break;
case NLME_RESET_confirm:
ConsolePutROMString( (ROM char *)"ZigBee Stack has been reset.\r\n" );
currentPrimitive = NO_PRIMITIVE;
break;
case NLME_START_ROUTER_confirm:
if (!params.NLME_START_ROUTER_confirm.Status)
{
ConsolePutROMString( (ROM char *)"Router Started!\r\n" );
}
else
{
PrintChar( params.NLME_JOIN_confirm.Status );
ConsolePutROMString( (ROM char *)" Router start unsuccessful. We cannot route frames.\r\n" );
}
// We are now ready to do ZigBee related tasks.
currentPrimitive = NO_PRIMITIVE;
break;
case APSDE_DATA_indication:
{
WORD_VAL attributeId;
BYTE command;
BYTE data;
BYTE dataLength;
//BYTE dataType;
BYTE frameHeader;
BYTE sequenceNumber;
BYTE transaction;
BYTE transByte;
currentPrimitive = NO_PRIMITIVE;
frameHeader = APLGet();
switch (params.APSDE_DATA_indication.DstEndpoint)
{
case EP_ZDO:
if ((frameHeader & APL_FRAME_TYPE_MASK) == APL_FRAME_TYPE_MSG)
{
frameHeader &= APL_FRAME_COUNT_MASK;
for (transaction=0; transaction<frameHeader; transaction++)
{
sequenceNumber = APLGet();
dataLength = APLGet();
transByte = 0;
switch( params.APSDE_DATA_indication.ClusterId )
{
// ********************************************************
// Put a case here to handle each ZDO response that we requested.
// Be sure to increment transByte for each APLGet().
// ********************************************************
default:
break;
}
// Read out the rest of the MSG in case there is another transaction.
for (; transByte<dataLength; transByte++)
{
APLGet();
}
}
}
break;
// ************************************************************************
// Place a case for each user defined endpoint.
// ************************************************************************
default:
// If the command type was something that requested an acknowledge, we could send back
// KVP_INVALID_ENDPOINT here.
break;
}
APLDiscardRx();
}
break;
case APSDE_DATA_confirm:
if (params.APSDE_DATA_confirm.Status)
{
ConsolePutROMString( (ROM char *)"Error " );
PrintChar( params.APSDE_DATA_confirm.Status );
ConsolePutROMString( (ROM char *)" sending message.\r\n" );
}
else
{
ConsolePutROMString( (ROM char *)" Message sent successfully.\r\n" );
}
currentPrimitive = NO_PRIMITIVE;
break;
case NO_PRIMITIVE:
if (!ZigBeeStatus.flags.bits.bNetworkJoined)
{
if (!ZigBeeStatus.flags.bits.bTryingToJoinNetwork)
{
if (ZigBeeStatus.flags.bits.bTryOrphanJoin)
{
ConsolePutROMString( (ROM char *)"Trying to join network as an orphan...\r\n" );
params.NLME_JOIN_request.ScanDuration = 8;
params.NLME_JOIN_request.ScanChannels.Val = ALLOWED_CHANNELS;
// not needed for orphan join - params.NLME_JOIN_request.PANId
params.NLME_JOIN_request.JoinAsRouter = FALSE;
params.NLME_JOIN_request.RejoinNetwork = TRUE;
params.NLME_JOIN_request.PowerSource = NOT_MAINS_POWERED;
params.NLME_JOIN_request.RxOnWhenIdle = FALSE;
params.NLME_JOIN_request.MACSecurity = FALSE;
currentPrimitive = NLME_JOIN_request;
}
else
{
ConsolePutROMString( (ROM char *)"Trying to join network as a new device...\r\n" );
params.NLME_NETWORK_DISCOVERY_request.ScanDuration = 8;
params.NLME_NETWORK_DISCOVERY_request.ScanChannels.Val = ALLOWED_CHANNELS;
currentPrimitive = NLME_NETWORK_DISCOVERY_request;
}
}
}
else
{
// See if we can do our own internal tasks.
if (ZigBeeReady())
{
// ************************************************************************
// Place all processes that can send messages here. Be sure to call
// ZigBeeBlockTx() when currentPrimitive is set to APSDE_DATA_request.
// ************************************************************************
}
}
break;
default:
PrintChar( currentPrimitive );
ConsolePutROMString( (ROM char *)" Unhandled primitive.\r\n" );
currentPrimitive = NO_PRIMITIVE;
break;
}
// *********************************************************************
// Place any non-ZigBee related processing here. Be sure that the code
// will loop back and execute ZigBeeTasks() in a timely manner.
// *********************************************************************
}
}
