/* User cannot free physical share memory, this is done in driver */
int IOGetPhyShareMem(vpu_mem_desc * buff)
{
return _IOGetPhyMem(VPU_IOC_GET_SHARE_MEM, buff);
}
int IOGetPhyMem(vpu_mem_desc * buff)
{
return _IOGetPhyMem(VPU_IOC_PHYMEM_ALLOC, buff);
}
/*!
* @brief IO system initialization.
* When user wants to start up the codec system,
* this function call is needed, to open the codec device,
* map the register into user space,
* get the working buffer/code buffer/parameter buffer,
* download the firmware, and then set up the interrupt signal path.
*
* @param callback vpu interrupt callback.
*
* @return
* @li 0 System initialization success.
* @li -1 System initialization failure.
*/
int IOSystemInit(void *callback)
{
int ret;
/* Exit directly if already initialized */
if (vpu_fd > 0) {
vpu_active_num++;
return 0;
}
ret = get_system_rev();
if (ret == -1) {
err_msg("Error: Unable to obtain system rev information\n");
return -1;
}
vpu_fd = open("/dev/mxc_vpu", O_RDWR);
if (vpu_fd < 0) {
err_msg("Can't open /dev/mxc_vpu: %s\n", strerror(errno));
return -1;
}
vpu_shared_mem = vpu_semaphore_open();
if (vpu_shared_mem == NULL) {
err_msg("Error: Unable to open vpu shared memory file\n");
close(vpu_fd);
vpu_fd = -1;
return -1;
}
if (!semaphore_wait(vpu_semap, API_MUTEX)) {
err_msg("Error: Unable to get mutex\n");
close (vpu_fd);
vpu_fd = -1;
return -1;
}
vpu_reg_base = (unsigned long)mmap(NULL, BIT_REG_MARGIN,
PROT_READ | PROT_WRITE,
MAP_SHARED, vpu_fd, 0);
if ((void *)vpu_reg_base == MAP_FAILED) {
err_msg("Can't map register\n");
close(vpu_fd);
vpu_fd = -1;
semaphore_post(vpu_semap, API_MUTEX);
return -1;
}
vpu_active_num++;
IOClkGateSet(true);
#ifdef BUILD_FOR_ANDROID
unsigned long va_addr;
/* Special handle the bit work buffer, which reserved in vpu driver probe */
bit_work_addr.size = TEMP_BUF_SIZE + PARA_BUF_SIZE +
CODE_BUF_SIZE + PARA_BUF2_SIZE;
if (_IOGetPhyMem(VPU_IOC_GET_WORK_ADDR, &bit_work_addr) < 0) {
err_msg("Get bitwork address failed!\n");
goto err;
}
va_addr = (unsigned long)mmap(NULL, bit_work_addr.size, PROT_READ | PROT_WRITE,
MAP_SHARED, vpu_fd, bit_work_addr.phy_addr);
if ((void *)va_addr == MAP_FAILED) {
bit_work_addr.virt_uaddr = 0;
goto err;
}
bit_work_addr.virt_uaddr = va_addr;
#else
bit_work_addr.size = TEMP_BUF_SIZE + PARA_BUF_SIZE +
CODE_BUF_SIZE + PARA_BUF2_SIZE;
if (_IOGetPhyMem(VPU_IOC_GET_WORK_ADDR, &bit_work_addr) < 0) {
err_msg("Get bitwork address failed!\n");
goto err;
}
if (IOGetVirtMem(&bit_work_addr) == -1)
goto err;
#endif
UnlockVpu(vpu_semap);
return 0;
err:
err_msg("Error in IOSystemInit()");
UnlockVpu(vpu_semap);
IOSystemShutdown();
return -1;
}
/*!
* @brief IO system initialization.
* When user wants to start up the codec system,
* this function call is needed, to open the codec device,
* map the register into user space,
* get the working buffer/code buffer/parameter buffer,
* download the firmware, and then set up the interrupt signal path.
*
* @param callback vpu interrupt callback.
*
* @return
* @li 0 System initialization success.
* @li -1 System initialization failure.
*/
int IOSystemInit(void *callback)
{
int ret;
/* Exit directly if already initialized */
if (vpu_fd > 0) {
vpu_active_num++;
return 0;
}
ret = get_system_rev();
if (ret == -1) {
err_msg("Error: Unable to obtain system rev information\n");
return -1;
}
vpu_fd = open("/dev/mxc_vpu", O_RDWR);
if (vpu_fd < 0) {
err_msg("Can't open /dev/mxc_vpu\n");
return -1;
}
vpu_semap = vpu_semaphore_open();
if (vpu_semap == NULL) {
err_msg("Error: Unable to open vpu shared memory file\n");
close(vpu_fd);
vpu_fd = -1;
return -1;
}
if (!semaphore_wait(vpu_semap, API_MUTEX)) {
err_msg("Error: Unable to get mutex\n");
close (vpu_fd);
vpu_fd = -1;
return -1;
}
vpu_reg_base = (unsigned long)mmap(NULL, BIT_REG_MARGIN,
PROT_READ | PROT_WRITE,
MAP_SHARED, vpu_fd, 0);
if ((void *)vpu_reg_base == MAP_FAILED) {
err_msg("Can't map register\n");
close(vpu_fd);
vpu_fd = -1;
semaphore_post(vpu_semap, API_MUTEX);
return -1;
}
vpu_active_num++;
IOClkGateSet(true);
bit_work_addr.size = TEMP_BUF_SIZE + PARA_BUF_SIZE +
CODE_BUF_SIZE + PARA_BUF2_SIZE;
if (_IOGetPhyMem(VPU_IOC_GET_WORK_ADDR, &bit_work_addr) < 0) {
err_msg("Get bitwork address failed!\n");
goto err;
}
if (IOGetVirtMem(&bit_work_addr) <= 0)
goto err;
UnlockVpu(vpu_semap);
return 0;
err:
err_msg("Error in IOSystemInit()");
UnlockVpu(vpu_semap);
IOSystemShutdown();
return -1;
}
int IOGetPhyUserDataMem(vpu_mem_desc * buff)
{
return _IOGetPhyMem(VPU_IOC_GET_USER_DATA_ADDR, buff);
}
int IOGetPhyPicParaMem(vpu_mem_desc * buff)
{
return _IOGetPhyMem(VPU_IOC_GET_PIC_PARA_ADDR, buff);
}
