int main(void)
{
// init fifos
fifo_init (toRS232FIFO, toRS232Buf, 100);
fifo_init (toUSBFIFO, toUSBBuf, 100);
USBNCallbackFIFORX1(&FromPC);
//USBNCallbackFIFOTX2Ready(&USBtoRS232);
sei(); // activate global interrupts
UARTInit(); // only for debugging
// setup usbstack with your descriptors
USBNInit(usbrs232,usbrs232Conf);
_USBNAddStringDescriptor(""); //pseudo lang
_USBNAddStringDescriptor("Microchip Technology Inc.");
//_USBNAddStringDescriptor("abcdefgh");
_USBNAddStringDescriptor("PICkit 2 Microcontroller Programmer ");
//_USBNAddStringDescriptor("PICkit 2 Microcontroller Programmer");
//_USBNAddStringDescriptor("ijklmnop");
_USBNAddStringDescriptor("PIC18F2550");
//_USBNAddStringDescriptor("12345678");
_USBNCreateStringField();
USBNInitMC(); // start usb controller
USBNStart(); // start device stack
while(1);
}
int main(void)
{
int conf, interf;
UARTInit();
USBNInit();
// setup your usbn device
USBNDeviceVendorID(0x0400);
USBNDeviceProductID(0x9876);
USBNDeviceBCDDevice(0x0201);
char lang[]={0x09,0x04};
_USBNAddStringDescriptor(lang); // language descriptor
USBNDeviceManufacture ("vScopeTeam");
USBNDeviceProduct ("vScopeDevice");
USBNDeviceSerialNumber("2006-04-05");
conf = USBNAddConfiguration();
//USBNConfigurationName(conf,"StandardKonfiguration");
USBNConfigurationPower(conf,50);
interf = USBNAddInterface(conf,0);
USBNAlternateSetting(conf,interf,0);
//USBNInterfaceName(conf,interf,"usbstorage");
USBNAddOutEndpoint(conf,interf,1,0x02,BULK,64,0,&SetGetPort);
USBNAddInEndpoint(conf,interf,1,0x03,BULK,64,0);
/*
conf = USBNAddConfiguration();
interf = USBNAddInterface(conf,0);
USBNAlternateSetting(conf,interf,1);
USBNAddInEndpoint(conf,interf,1,0x02,BULK,64);
USBNAddInEndpoint(conf,interf,2,0x03,BULK,8);
USBNAddInEndpoint(conf,interf,3,0x04,BULK,64);
*/
MCUCR |= (1 << ISC01); // fallende flanke
GICR |= (1 << INT0);
sei();
USBNInitMC();
// start usb chip
USBNStart();
DDRB=0xff;
PORTB=0x00;
while(1);
}
// define manufacture string
void USBNDeviceManufacture (char *manufacture)
{
int index=0;
// add new string to string list an get actual index
index = _USBNAddStringDescriptor(manufacture);
// save index in device descriptor
if(index>0)
DeviceDescriptor.iManufacturer = index;
}
// define manufacture string
void USBNDeviceSerialNumber (char *serialnumber)
{
int index=0;
// add new item to string list an get actual index
index = _USBNAddStringDescriptor(serialnumber);
// save index in device descriptor
if(index>0)
DeviceDescriptor.iSerialNumber = index;
}
// define manufacture string
void USBNDeviceProduct (char *product)
{
int index=0;
// add new item to string list an get actual index
index = _USBNAddStringDescriptor(product);
// save index in device descriptor
if(index>0)
DeviceDescriptor.iProduct = index;
}
int main(void)
{
int conf, interf;
//UARTInit();
USBNInit();
usbprog.long_running=0;
DDRA = (1 << PA4); // status led
DDRA = (1 << PA7); // switch pin
// setup your usbn device
USBNDeviceVendorID(0x1786);
USBNDeviceProductID(0x0c62);
USBNDeviceBCDDevice(0x0007);
char lang[]={0x09,0x04};
_USBNAddStringDescriptor(lang); // language descriptor
USBNDeviceManufacture ("EmbeddedProjects");
USBNDeviceProduct ("usbprogSkeleton ");
conf = USBNAddConfiguration();
USBNConfigurationPower(conf,50);
interf = USBNAddInterface(conf,0);
USBNAlternateSetting(conf,interf,0);
USBNAddInEndpoint(conf,interf,1,0x02,BULK,64,0,&CommandAnswerRest);
USBNAddOutEndpoint(conf,interf,1,0x02,BULK,64,0,&Commands);
USBNInitMC();
sei();
USBNStart();
//LED_on;
int i;
for(i=0;i<320;i++)
answer[i]=i+2;
PORTA &= ~(1<<PA7);
//CommandAnswer(320);
while(1){
//PORTA |= (1<<PA7);
//PORTA &= ~(1<<PA7);
}
}
int main(void)
{
// init fifos
fifo_init (toRS232FIFO, toRS232Buf, 100);
fifo_init (toUSBFIFO, toUSBBuf, 100);
USBNCallbackFIFORX1(&USBtoRS232);
//USBNCallbackFIFOTX2Ready(&USBtoRS232);
sei(); // activate global interrupts
UARTInit(); // only for debugging
// setup usbstack with your descriptors
USBNInit(usbrs232,usbrs232Conf);
_USBNAddStringDescriptor(""); //pseudo lang
_USBNAddStringDescriptor("FTDI");
_USBNAddStringDescriptor("Dual RS232");
_USBNCreateStringField();
USBNInitMC(); // start usb controller
USBNStart(); // start device stack
while(1){
#if 0
// wenn cpu zeit vorhanden fifos weiterverteilen
// usb -> rs232
// rs232 -> usb
USBNWrite(TXC1,FLUSH);
USBNWrite(TXD1,0x44);
send_toggle();
wait_ms(100);
#endif
}
}
int main(void)
{
int conf, interf;
UARTInit();
USBNInit();
DDRA = (1 << DDA4);
//PORTA |= (1<<PA4); //on
PORTA &= ~(1<<PA4); //off
USBNDeviceVendorID(0x1781); //atmel ids
USBNDeviceProductID(0x0c62); // atmel ids
USBNDeviceBCDDevice(0x0001);
char lang[]={0x09,0x04};
_USBNAddStringDescriptor(lang); // language descriptor
USBNDeviceManufacture ("B.Sauter");
USBNDeviceProduct ("LEDBLINK");
//0000A0016461 (aktuelle)
//0000A0019647
//0000A0000252
conf = USBNAddConfiguration();
USBNConfigurationPower(conf,50);
interf = USBNAddInterface(conf,0);
USBNAlternateSetting(conf,interf,0);
USBNAddInEndpoint(conf,interf,1,0x02,BULK,64,0,NULL);
USBNAddOutEndpoint(conf,interf,1,0x02,BULK,64,0,&USBFlash);
USBNInitMC();
// start usb chip
USBNStart();
sei();
wait_ms(1000);
while(1){
PORTA &= ~(1<<PA4); //off
wait_ms(100);
PORTA |= (1<<PA4); //on
wait_ms(100);
}
}
int main(void)
{
int conf, interf;
UARTInit();
USBNInit();
// setup your usbn device
USBNDeviceVendorID(0x0400);
USBNDeviceProductID(0x9876);
USBNDeviceBCDDevice(0x0201);
char lang[]={0x09,0x04};
_USBNAddStringDescriptor(lang); // language descriptor
USBNDeviceManufacture ("B.Sauter");
USBNDeviceProduct ("usbflash");
USBNDeviceSerialNumber("2006-04-12");
conf = USBNAddConfiguration();
//USBNConfigurationName(conf,"StandardKonfiguration");
USBNConfigurationPower(conf,50);
interf = USBNAddInterface(conf,0);
USBNAlternateSetting(conf,interf,0);
//USBNInterfaceName(conf,interf,"usbstorage");
USBNAddOutEndpoint(conf,interf,1,0x02,BULK,64,0,&USBFlash);
USBNAddInEndpoint(conf,interf,1,0x03,BULK,64,0,NULL);
MCUCR |= (1 << ISC01); // fallende flanke
GICR |= (1 << INT0);
sei();
USBNInitMC();
// start usb chip
USBNStart();
while(1);
}
// give a name the configuration
void USBNConfigurationName(int configuration, char *name)
{
int index=0;
// add new item to string list an get actual index
index = _USBNAddStringDescriptor(name);
// find configuration id
struct list_entry *ptr = DescriptorList;
char *values;
while(ptr != NULL) {
values = (char*)ptr->data;
if(ptr->type==0x02 && values[5]==configuration) // if descr = confi
{
values[6]=index;
}
ptr=ptr->next;
}
}
int main(void)
{
int conf, interf;
UARTInit();
USBNInit();
// setup your usbn device
USBNDeviceVendorID(0x0400);
USBNDeviceProductID(0x0000);
USBNDeviceBCDDevice(0x0000);
char lang[]={0x09,0x04};
_USBNAddStringDescriptor(lang); // language descriptor
USBNDeviceManufacture ("FH Augsburg");
USBNDeviceProduct ("vScope");
USBNDeviceSerialNumber("www.vscope.de");
conf = USBNAddConfiguration();
USBNConfigurationPower(conf,50);
interf = USBNAddInterface(conf,0);
USBNAlternateSetting(conf,interf,0);
USBNAddOutEndpoint(conf,interf,1,0x02,BULK,64,0,&ParseCommand);
USBNAddInEndpoint(conf,interf,1,0x03,BULK,64,0,&TransferISR);
USBNInitMC();
// start usb chip
USBNStart();
//UARTWrite("waiting for enumaration signal...\r\n");
while(1)
{
/* send new messages if some available */
}
}
int main(void)
{
int conf, interf;
/* set PE as output and to low, other pins to high-Z */
JTAG_PORT_INIT = (1 << PE);
JTAG_PORT_WRITE = 0;
USBNInit();
usbprog.datatogl = 0;
USBNDeviceVendorID(VID);
USBNDeviceProductID(PID);
USBNDeviceBCDDevice(0x0200);
char lang[]={0x09,0x04};
_USBNAddStringDescriptor(lang); // language descriptor
USBNDeviceManufacture ("USBprog EmbeddedProjects");
USBNDeviceProduct("usbprogXSVF Xilinx Programmer");
//USBNDeviceSerialNumber("GNU/GPL2");
conf = USBNAddConfiguration();
USBNConfigurationPower(conf,50);
interf = USBNAddInterface(conf,0);
USBNAlternateSetting(conf,interf,0);
USBNAddInEndpoint(conf,interf,1,0x02,BULK,64,0,NULL);
USBNAddOutEndpoint(conf,interf,1,0x03,BULK,64,0,&Commands);
USBNInitMC();
// start usb chip
USBNStart();
sei();
while(1);
}
int main(void)
{
int conf, interf;
USBNInit();
usbprog.datatogl = 0; // 1MHz
//DDRA = (1 << PA4);
USBNDeviceVendorID(0x1781); //atmel ids
USBNDeviceProductID(0x0c62); // atmel ids
USBNDeviceBCDDevice(0x0200);
char lang[]={0x09,0x04};
_USBNAddStringDescriptor(lang); // language descriptor
USBNDeviceManufacture("B.Sauter");
USBNDeviceProduct("USB JTAG Interface");
USBNDeviceSerialNumber("GNU/GPL2");
conf = USBNAddConfiguration();
USBNConfigurationPower(conf,50);
interf = USBNAddInterface(conf,0);
USBNAlternateSetting(conf,interf,0);
USBNAddInEndpoint(conf,interf,1,0x02,BULK,64,0,NULL);
USBNAddOutEndpoint(conf,interf,1,0x03,BULK,64,0,&Commands);
USBNInitMC();
sei();
// start usb chip
USBNStart();
while(1);
}
// give a name the configuration
void USBNConfigurationName(int configuration, char *name)
{
int index=0;
// add new item to string list an get actual index
index = _USBNAddStringDescriptor(name);
// find configuration id
struct list_entry *ptr = DescriptorList;
struct usb_configuration_descriptor* conf;
while(ptr != NULL) {
if(ptr->type==CONFIGURATION)
{
conf = (struct usb_configuration_descriptor*)ptr->data;
if(conf->bConfigurationValue == (char)configuration)
{
conf->iConfiguration=index;
}
}
ptr=ptr->next;
}
}
