C++ (Cpp) __HAL_RCC_USB_OTG_HS_ULPI_CLK_DISABLE Examples

Example #1

File: usbd_conf.c Project: itxs/STM32F7

void HAL_PCD_MspDeInit(PCD_HandleTypeDef* pcdHandle)
{
  if(pcdHandle->Instance==USB_OTG_HS)
  {
    __HAL_RCC_USB_OTG_HS_CLK_DISABLE();
    __HAL_RCC_USB_OTG_HS_ULPI_CLK_DISABLE();
  
    /**USB_OTG_HS GPIO Configuration    
    PB5     ------> USB_OTG_HS_ULPI_D7
    PH4     ------> USB_OTG_HS_ULPI_NXT
    PB13     ------> USB_OTG_HS_ULPI_D6
    PB12     ------> USB_OTG_HS_ULPI_D5
    PC0     ------> USB_OTG_HS_ULPI_STP
    PC2     ------> USB_OTG_HS_ULPI_DIR
    PA5     ------> USB_OTG_HS_ULPI_CK
    PB10     ------> USB_OTG_HS_ULPI_D3
    PA3     ------> USB_OTG_HS_ULPI_D0
    PB1     ------> USB_OTG_HS_ULPI_D2
    PB0     ------> USB_OTG_HS_ULPI_D1
    PB11     ------> USB_OTG_HS_ULPI_D4 
    */
    HAL_GPIO_DeInit(GPIOB, GPIO_PIN_5|GPIO_PIN_13|GPIO_PIN_12|GPIO_PIN_10 
                          |GPIO_PIN_1|GPIO_PIN_0|GPIO_PIN_11);
    HAL_GPIO_DeInit(GPIOH, GPIO_PIN_4);
    HAL_GPIO_DeInit(GPIOC, GPIO_PIN_0|GPIO_PIN_2);
    HAL_GPIO_DeInit(GPIOA, GPIO_PIN_5|GPIO_PIN_3);
    HAL_NVIC_DisableIRQ(OTG_HS_IRQn);
  }
}

Example #2

File: usbh_conf.c Project: z80/stm32f429

/**
  * @brief  DeInitializes the HCD MSP.
  * @param  hhcd: HCD handle
  * @retval None
  */
void HAL_HCD_MspDeInit(HCD_HandleTypeDef *hhcd)
{
  if(hhcd->Instance == USB_OTG_FS)
  {  
    /* Disable USB FS Clocks */ 
    __HAL_RCC_USB_OTG_FS_CLK_DISABLE();
  }
  else if(hhcd->Instance == USB_OTG_HS)
  {  
    /* Disable USB HS Clocks */ 
    __HAL_RCC_USB_OTG_HS_CLK_DISABLE();
    __HAL_RCC_USB_OTG_HS_ULPI_CLK_DISABLE();
  }  
}

Example #3

File: usbh_conf.c Project: Joe-Merten/Stm32-Tools-Evaluation

/**
  * @brief  DeInitializes the HCD MSP.
  * @param  hhcd: HCD handle
  * @retval None
  */
void HAL_HCD_MspDeInit(HCD_HandleTypeDef *hhcd)
{
    /* Disable USB HS Clocks */
    __HAL_RCC_USB_OTG_HS_CLK_DISABLE();
    __HAL_RCC_USB_OTG_HS_ULPI_CLK_DISABLE();
}