C++ (Cpp) __TIM14_CLK_ENABLE Examples

Example #1

File: pwmout_api.c Project: nickmolo/ECE477

void pwmout_init(pwmout_t* obj, PinName pin)
{
    // Get the peripheral name from the pin and assign it to the object
    obj->pwm = (PWMName)pinmap_peripheral(pin, PinMap_PWM);

    if (obj->pwm == (PWMName)NC) {
        error("PWM error: pinout mapping failed.");
    }

    // Enable TIM clock
#if defined(TIM1_BASE)
    if (obj->pwm == PWM_1) __TIM1_CLK_ENABLE();
#endif
#if defined(TIM2_BASE)
    if (obj->pwm == PWM_2) __TIM2_CLK_ENABLE();
#endif
    if (obj->pwm == PWM_3) __TIM3_CLK_ENABLE();
    if (obj->pwm == PWM_14) __TIM14_CLK_ENABLE();
    if (obj->pwm == PWM_15) __TIM15_CLK_ENABLE();
    if (obj->pwm == PWM_16) __TIM16_CLK_ENABLE();
    if (obj->pwm == PWM_17) __TIM17_CLK_ENABLE();

    // Configure GPIO
    pinmap_pinout(pin, PinMap_PWM);

    obj->pin = pin;
    obj->period = 0;
    obj->pulse = 0;

    pwmout_period_us(obj, 20000); // 20 ms per default
}

Example #2

File: stm32f0xx_hal_msp.c Project: s54mtb/stm32projects

void HAL_TIM_Base_MspInit(TIM_HandleTypeDef* htim_base)
{

  GPIO_InitTypeDef GPIO_InitStruct;
  if(htim_base->Instance==TIM3)
  {
    /* Peripheral clock enable */
    __TIM3_CLK_ENABLE();
  
    /**TIM3 GPIO Configuration    
    PA6     ------> TIM3_CH1 
    */
    GPIO_InitStruct.Pin = GPIO_PIN_6;
    GPIO_InitStruct.Mode = GPIO_MODE_AF_PP;
    GPIO_InitStruct.Pull = GPIO_NOPULL;
    GPIO_InitStruct.Speed = GPIO_SPEED_LOW;
    GPIO_InitStruct.Alternate = GPIO_AF1_TIM3;
    HAL_GPIO_Init(GPIOA, &GPIO_InitStruct);
  }
  else if(htim_base->Instance==TIM14)
  {
     /* Peripheral clock enable */
    __TIM14_CLK_ENABLE();
  /* Peripheral interrupt init*/
    HAL_NVIC_SetPriority(TIM14_IRQn, 0, 0);
    HAL_NVIC_EnableIRQ(TIM14_IRQn);
 }

}

Example #3

File: stm32f0xx_hal_msp.c Project: cmmakerclub/current_control_drive

void HAL_TIM_Base_MspInit(TIM_HandleTypeDef* htim_base)
{

  GPIO_InitTypeDef GPIO_InitStruct;
  if(htim_base->Instance==TIM14)
  {
  /* USER CODE BEGIN TIM14_MspInit 0 */

  /* USER CODE END TIM14_MspInit 0 */
    /* Peripheral clock enable */
    __TIM14_CLK_ENABLE();
  
    /**TIM14 GPIO Configuration    
    PA4     ------> TIM14_CH1 
    */
    GPIO_InitStruct.Pin = GPIO_PIN_4;
    GPIO_InitStruct.Mode = GPIO_MODE_AF_PP;
    GPIO_InitStruct.Pull = GPIO_NOPULL;
    GPIO_InitStruct.Speed = GPIO_SPEED_LOW;
    GPIO_InitStruct.Alternate = GPIO_AF4_TIM14;
    HAL_GPIO_Init(GPIOA, &GPIO_InitStruct);

  /* USER CODE BEGIN TIM14_MspInit 1 */

  /* USER CODE END TIM14_MspInit 1 */
  }
  else if(htim_base->Instance==TIM17)
  {
  /* USER CODE BEGIN TIM17_MspInit 0 */

  /* USER CODE END TIM17_MspInit 0 */
    /* Peripheral clock enable */
    __TIM17_CLK_ENABLE();
  /* System interrupt init*/
    HAL_NVIC_SetPriority(TIM17_IRQn, 1, 0);
    HAL_NVIC_EnableIRQ(TIM17_IRQn);
  /* USER CODE BEGIN TIM17_MspInit 1 */

  /* USER CODE END TIM17_MspInit 1 */
  }

}