void lcd_enable(bool enable)
{
	if (enable)
		__lcd_init();
	else
		SegmentLCD_Disable();
}
void __platform_init()
{
    __efm32hg_mcu_init();
    __gpio_init();
    __led_init();
    __lcd_init();

#ifdef PLATFORM_USE_USB_CDC
    __usb_init_cdc();
#endif

#if defined(FRAMEWORK_LOG_ENABLED) || defined(FRAMEWORK_SHELL_ENABLED)
    // framework does not need console, if app needs it app should init this
    console_init();
#endif

#ifdef USE_CC1101
    // configure the interrupt pins here, since hw_gpio_configure_pin() is MCU specific and not part of the common HAL API
    hw_gpio_configure_pin(CC1101_GDO0_PIN, true, gpioModeInput, 0); // TODO pull up or pull down to prevent floating
    // hw_gpio_configure_pin(CC1101_SPI_PIN_CS, false, gpioModePushPull, 1);
    //hw_gpio_configure_pin(CC1101_GDO2_PIN, true, gpioModeInput, 0) // TODO pull up or pull down to prevent floating // TODO not used for now
#endif
    __hw_debug_init();

    error_t err;
    err = hw_gpio_configure_pin(BUTTON0, true, gpioModeInput, 0); assert(err == SUCCESS); // TODO pull up or pull down to prevent floating
    err = hw_gpio_configure_pin(BUTTON1, true, gpioModeInput, 0); assert(err == SUCCESS); // TODO pull up or pull down to prevent floating

    // TODO: only for cc430?
    // __watchdog_init(); // TODO configure from cmake?
}
void __platform_init()
{
    __efm32hg_mcu_init();
    __gpio_init();
    __uart_init();
    __led_init();
    __lcd_init();

#ifdef PLATFORM_USE_USB_CDC
    __usb_init_cdc();
#endif

#ifdef USE_CC1101
    //TODO: add calls to hw_gpio_configure_pin for the pins used by the CC1101 driver
    //(and possibly the spi interface)

    // configure the interrupt pins here, since hw_gpio_configure_pin() is MCU specific and not part of the common HAL API
    hw_gpio_configure_pin(CC1101_GDO0_PIN, true, gpioModeInput, 0); // TODO pull up or pull down to prevent floating
    //hw_gpio_configure_pin(CC1101_GDO2_PIN, true, gpioModeInput, 0) // TODO pull up or pull down to prevent floating // TODO not used for now
#endif
    __hw_debug_init();

    error_t err;
    err = hw_gpio_configure_pin(BUTTON0, true, gpioModeInput, 0); assert(err == SUCCESS); // TODO pull up or pull down to prevent floating
    err = hw_gpio_configure_pin(BUTTON1, true, gpioModeInput, 0); assert(err == SUCCESS); // TODO pull up or pull down to prevent floating
}
void __platform_init()
{
	__ezr32lg_mcu_init();
    __gpio_init();
    __led_init();
    __lcd_init();


//#ifdef USE_CC1101
    //TODO: add calls to hw_gpio_configure_pin for the pins used by the CC1101 driver
    //(and possibly the spi interface)

    // configure the interrupt pins here, since hw_gpio_configure_pin() is MCU specific and not part of the common HAL API
    //hw_gpio_configure_pin(CC1101_GDO0_PIN, true, gpioModeInput, 0); // TODO pull up or pull down to prevent floating
    //hw_gpio_configure_pin(CC1101_GDO2_PIN, true, gpioModeInput, 0) // TODO pull up or pull down to prevent floating // TODO not used for now
//#endif
    __hw_debug_init();

    __watchdog_init(); // TODO configure from cmake?
}