/*init functions makes me happy*/
void local_bsp_apic_init(void)
{
uint32_t v;
kprintf("[LW] Checking APIC is present ... ");
if(__local_apic_check()<0) {
kprintf("FAIL\n");
return;
} else
kprintf("OK\n");
v=local_apic->version.version;
kprintf("[LW] APIC version: %d\n",v);
/* first we're need to clear APIC to avoid magical results */
__local_apic_clear();
/* enable APIC */
__enable_apic();
/* enable wire mode*/
/* set nil vectors */
__set_lvt_lint_vector(0,0x0);
__set_lvt_lint_vector(1,0x0);
/*set mode#7 for lint0*/
local_apic->lvt_lint0.tx_mode=0x7;
/*set mode#4 for lint1*/
local_apic->lvt_lint1.tx_mode=0x4;
/*tx_mode & polarity set to 0 on both lintx*/
local_apic->lvt_lint0.tx_status |= (1 << 0);
local_apic->lvt_lint0.polarity |= (1 << 0);
local_apic->lvt_lint1.tx_status |= (1 << 0);
local_apic->lvt_lint1.polarity |= (1 << 0);
}
static int __local_apic_init(bool msgout)
{
uint32_t v;
int i=0,l;
apic_lvt_lint_t lvt_lint;
apic_icr1_t icr1;
if (msgout) {
kprintf("APIC: Checking APIC is present ... ");
if(__local_apic_check()<0) {
kprintf("FAIL\n");
return -1;
} else{
kprintf("OK\n");
}
}
enable_l_apic_in_msr();
v=get_apic_version();
if (msgout)
kprintf("APIC: APIC version: %d apic id:%x\n",v,get_local_apic_id());
/* first we're need to clear APIC to avoid magical results */
__local_apic_clear();
__disable_apic();
set_apic_dfr_mode(0xf);
kprintf(" APIC id:%d destination id :%d \n",get_local_apic_id(),(1 << (__apics_number & 7)));
set_apic_ldr_logdest(1 << (__apics_number & 7));
__apics_number++;
apic_set_task_priority(0);
/* clear bits for interrupts - can be filled up to other os */
for(i=7;i>=0;i--){
v=local_apic->isr[i].bits;
for(l=31;l>=0;l--)
if(v & (1 << l))
local_apic_send_eoi();
}
set_apic_spurious_vector(0xff);
__enable_apic();
/* set nil vectors */
__set_lvt_lint_vector(0,0x34);
__set_lvt_lint_vector(1,0x35);
/*set mode#7 extINT for lint0*/
lvt_lint=local_apic->lvt_lint0;
lvt_lint.tx_mode=0x7;
lvt_lint.mask=1;
lvt_lint.tx_status = 0x0;
lvt_lint.polarity = LEVEL_DEASSERT;
lvt_lint.trigger = TRIG_EDGE;
local_apic->lvt_lint0.reg=lvt_lint.reg;
/*set mode#4 NMI for lint1*/
lvt_lint=local_apic->lvt_lint1;
lvt_lint.tx_mode=0x4;
lvt_lint.mask=1;
lvt_lint.tx_status = 0x0;
lvt_lint.polarity = LEVEL_DEASSERT;
lvt_lint.trigger = TRIG_EDGE;
local_apic->lvt_lint1.reg=lvt_lint.reg;
/* ok, now we're need to set esr vector to 0xfe */
local_apic->lvt_error.vector = 0xfe;
/*enable to receive errors*/
if(__get_maxlvt()>3)
local_apic->esr.tx_cs_err = 0x0;
/* set icr1 registers*/
icr1=local_apic->icr1;
icr1.tx_mode=TXMODE_INIT;
icr1.rx_mode=DMODE_PHY;
icr1.level=0x0;
icr1.shorthand=0x2;
icr1.trigger=0x1;
local_apic->icr1.reg=icr1.reg;
// set internal apic error interrupt vector
*(uint32_t*)((uint64_t)local_apic + 0x370) = 200;
return 0;
}
