/* This function behaves exactly like write(). The only difference is
* that it accepts, the gnutls_session_t and the content_type_t of data to
* send (if called by the user the Content is specific)
* It is intended to transfer data, under the current session.
*
* Oct 30 2001: Removed capability to send data more than MAX_RECORD_SIZE.
* This makes the function much easier to read, and more error resistant
* (there were cases were the old function could mess everything up).
* --nmav
*
* This function may accept a NULL pointer for data, and 0 for size, if
* and only if the previous send was interrupted for some reason.
*
*/
ssize_t
_gnutls_send_int (gnutls_session_t session, content_type_t type,
gnutls_handshake_description_t htype,
unsigned int epoch_rel, const void *_data,
size_t sizeofdata, unsigned int mflags)
{
mbuffer_st *bufel;
ssize_t cipher_size;
int retval, ret;
int data2send_size;
uint8_t headers[5];
const uint8_t *data = _data;
record_parameters_st *record_params;
record_state_st *record_state;
ret = _gnutls_epoch_get (session, epoch_rel, &record_params);
if (ret < 0)
{
gnutls_assert ();
return ret;
}
/* Safeguard against processing data with an incomplete cipher state. */
if (!record_params->initialized)
{
gnutls_assert ();
return GNUTLS_E_INVALID_REQUEST;
}
record_state = &record_params->write;
/* Do not allow null pointer if the send buffer is empty.
* If the previous send was interrupted then a null pointer is
* ok, and means to resume.
*/
if (session->internals.record_send_buffer.byte_length == 0 &&
(sizeofdata == 0 && _data == NULL))
{
gnutls_assert ();
return GNUTLS_E_INVALID_REQUEST;
}
if (type != GNUTLS_ALERT) /* alert messages are sent anyway */
if (session_is_valid (session) || session->internals.may_not_write != 0)
{
gnutls_assert ();
return GNUTLS_E_INVALID_SESSION;
}
headers[0] = type;
/* Use the default record version, if it is
* set.
*/
copy_record_version (session, htype, &headers[1]);
_gnutls_record_log
("REC[%p]: Sending Packet[%d] %s(%d) with length: %d\n", session,
(int) _gnutls_uint64touint32 (&record_state->sequence_number),
_gnutls_packet2str (type), type, (int) sizeofdata);
if (sizeofdata > MAX_RECORD_SEND_SIZE)
data2send_size = MAX_RECORD_SEND_SIZE;
else
data2send_size = sizeofdata;
/* Only encrypt if we don't have data to send
* from the previous run. - probably interrupted.
*/
if (mflags != 0 && session->internals.record_send_buffer.byte_length > 0)
{
ret = _gnutls_io_write_flush (session);
if (ret > 0)
cipher_size = ret;
else
cipher_size = 0;
retval = session->internals.record_send_buffer_user_size;
}
else
{
/* now proceed to packet encryption
*/
cipher_size = data2send_size + MAX_RECORD_OVERHEAD;
bufel = _mbuffer_alloc (cipher_size, cipher_size);
if (bufel == NULL)
{
gnutls_assert ();
return GNUTLS_E_MEMORY_ERROR;
}
cipher_size =
_gnutls_encrypt (session, headers, RECORD_HEADER_SIZE, data,
data2send_size, _mbuffer_get_udata_ptr (bufel),
cipher_size, type,
(session->internals.priorities.no_padding ==
0) ? 1 : 0, record_params);
if (cipher_size <= 0)
{
gnutls_assert ();
if (cipher_size == 0)
cipher_size = GNUTLS_E_ENCRYPTION_FAILED;
gnutls_free (bufel);
return cipher_size; /* error */
}
retval = data2send_size;
session->internals.record_send_buffer_user_size = data2send_size;
/* increase sequence number
*/
if (_gnutls_uint64pp (&record_state->sequence_number) != 0)
{
session_invalidate (session);
gnutls_assert ();
gnutls_free (bufel);
return GNUTLS_E_RECORD_LIMIT_REACHED;
}
_mbuffer_set_udata_size (bufel, cipher_size);
ret = _gnutls_io_write_buffered (session, bufel, mflags);
}
if (ret != cipher_size)
{
if (ret < 0 && gnutls_error_is_fatal (ret) == 0)
{
/* If we have sent any data then just return
* the error value. Do not invalidate the session.
*/
gnutls_assert ();
return ret;
}
if (ret > 0)
{
gnutls_assert ();
ret = GNUTLS_E_INTERNAL_ERROR;
}
session_unresumable (session);
session->internals.may_not_write = 1;
gnutls_assert ();
return ret;
}
session->internals.record_send_buffer_user_size = 0;
_gnutls_record_log ("REC[%p]: Sent Packet[%d] %s(%d) with length: %d\n",
session,
(int)
_gnutls_uint64touint32
(&record_state->sequence_number),
_gnutls_packet2str (type), type, (int) cipher_size);
return retval;
}
/* This function behaves exactly like write(). The only difference is
* that it accepts, the gnutls_session_t and the content_type_t of data to
* send (if called by the user the Content is specific)
* It is intended to transfer data, under the current session.
*
* @type: The content type to send
* @htype: If this is a handshake message then the handshake type
* @epoch_rel: %EPOCH_READ_* or %EPOCH_WRITE_*
* @data: the data to be sent
* @data_size: the size of the @data
* @target_length: @data_size + minimum required padding
* @mflags: zero or %MBUFFER_FLUSH
*
* Oct 30 2001: Removed capability to send data more than MAX_RECORD_SIZE.
* This makes the function much easier to read, and more error resistant
* (there were cases were the old function could mess everything up).
* --nmav
*
* This function may accept a NULL pointer for data, and 0 for size, if
* and only if the previous send was interrupted for some reason.
*
*/
ssize_t
_gnutls_send_tlen_int (gnutls_session_t session, content_type_t type,
gnutls_handshake_description_t htype,
unsigned int epoch_rel, const void *_data,
size_t data_size, size_t target_length, unsigned int mflags)
{
mbuffer_st *bufel;
ssize_t cipher_size;
int retval, ret;
int send_data_size;
uint8_t *headers;
int header_size;
const uint8_t *data = _data;
record_parameters_st *record_params;
record_state_st *record_state;
ret = _gnutls_epoch_get (session, epoch_rel, &record_params);
if (ret < 0)
return gnutls_assert_val(ret);
/* Safeguard against processing data with an incomplete cipher state. */
if (!record_params->initialized)
return gnutls_assert_val(GNUTLS_E_INVALID_REQUEST);
record_state = &record_params->write;
/* Do not allow null pointer if the send buffer is empty.
* If the previous send was interrupted then a null pointer is
* ok, and means to resume.
*/
if (session->internals.record_send_buffer.byte_length == 0 &&
(data_size == 0 && _data == NULL))
{
gnutls_assert ();
return GNUTLS_E_INVALID_REQUEST;
}
if (type != GNUTLS_ALERT) /* alert messages are sent anyway */
if (session_is_valid (session) || session->internals.may_not_write != 0)
{
gnutls_assert ();
return GNUTLS_E_INVALID_SESSION;
}
if (data_size > MAX_USER_SEND_SIZE(session))
{
if (IS_DTLS(session))
return gnutls_assert_val(GNUTLS_E_LARGE_PACKET);
send_data_size = MAX_USER_SEND_SIZE(session);
}
else
send_data_size = data_size;
/* Only encrypt if we don't have data to send
* from the previous run. - probably interrupted.
*/
if (mflags != 0 && session->internals.record_send_buffer.byte_length > 0)
{
ret = _gnutls_io_write_flush (session);
if (ret > 0)
cipher_size = ret;
else
cipher_size = 0;
retval = session->internals.record_send_buffer_user_size;
}
else
{
if (unlikely((send_data_size == 0 && target_length == 0)))
return gnutls_assert_val(GNUTLS_E_INTERNAL_ERROR);
/* now proceed to packet encryption
*/
cipher_size = MAX_RECORD_SEND_SIZE(session);
bufel = _mbuffer_alloc (0, cipher_size+CIPHER_SLACK_SIZE);
if (bufel == NULL)
return gnutls_assert_val(GNUTLS_E_MEMORY_ERROR);
headers = _mbuffer_get_uhead_ptr(bufel);
headers[0] = type;
/* Use the default record version, if it is
* set. */
copy_record_version (session, htype, &headers[1]);
header_size = RECORD_HEADER_SIZE(session);
/* Adjust header length and add sequence for DTLS */
if (IS_DTLS(session))
memcpy(&headers[3], &record_state->sequence_number.i, 8);
_gnutls_record_log
("REC[%p]: Preparing Packet %s(%d) with length: %d and target length: %d\n", session,
_gnutls_packet2str (type), type, (int) data_size, (int) target_length);
_mbuffer_set_udata_size(bufel, cipher_size);
_mbuffer_set_uhead_size(bufel, header_size);
ret =
_gnutls_encrypt (session,
data, send_data_size, target_length,
bufel, type, record_params);
if (ret <= 0)
{
gnutls_assert ();
if (ret == 0)
ret = GNUTLS_E_ENCRYPTION_FAILED;
gnutls_free (bufel);
return ret; /* error */
}
cipher_size = _mbuffer_get_udata_size(bufel);
retval = send_data_size;
session->internals.record_send_buffer_user_size = send_data_size;
/* increase sequence number
*/
if (sequence_increment (session, &record_state->sequence_number) != 0)
{
session_invalidate (session);
gnutls_free (bufel);
return gnutls_assert_val(GNUTLS_E_RECORD_LIMIT_REACHED);
}
ret = _gnutls_io_write_buffered (session, bufel, mflags);
}
if (ret != cipher_size)
{
/* If we have sent any data then just return
* the error value. Do not invalidate the session.
*/
if (ret < 0 && gnutls_error_is_fatal (ret) == 0)
return gnutls_assert_val(ret);
if (ret > 0)
ret = gnutls_assert_val(GNUTLS_E_INTERNAL_ERROR);
session_unresumable (session);
session->internals.may_not_write = 1;
return gnutls_assert_val(ret);
}
session->internals.record_send_buffer_user_size = 0;
_gnutls_record_log ("REC[%p]: Sent Packet[%d] %s(%d) in epoch %d and length: %d\n",
session,
(unsigned int)
_gnutls_uint64touint32
(&record_state->sequence_number),
_gnutls_packet2str (type), type,
(int) record_params->epoch,
(int) cipher_size);
return retval;
}
/* This function behaves exactly like write(). The only difference is
* that it accepts, the gnutls_session_t and the content_type_t of data to
* send (if called by the user the Content is specific)
* It is intended to transfer data, under the current session.
*
* Oct 30 2001: Removed capability to send data more than MAX_RECORD_SIZE.
* This makes the function much easier to read, and more error resistant
* (there were cases were the old function could mess everything up).
* --nmav
*
* This function may accept a NULL pointer for data, and 0 for size, if
* and only if the previous send was interrupted for some reason.
*
*/
ssize_t
_gnutls_send_int (gnutls_session_t session, content_type_t type,
gnutls_handshake_description_t htype, const void *_data,
size_t sizeofdata)
{
uint8_t *cipher;
int cipher_size;
int retval, ret;
int data2send_size;
uint8_t headers[5];
const uint8_t *data = _data;
int erecord_size = 0;
opaque *erecord = NULL;
/* Do not allow null pointer if the send buffer is empty.
* If the previous send was interrupted then a null pointer is
* ok, and means to resume.
*/
if (session->internals.record_send_buffer.length == 0 &&
(sizeofdata == 0 && _data == NULL))
{
gnutls_assert ();
return GNUTLS_E_INVALID_REQUEST;
}
if (type != GNUTLS_ALERT) /* alert messages are sent anyway */
if (session_is_valid (session) || session->internals.may_not_write != 0)
{
gnutls_assert ();
return GNUTLS_E_INVALID_SESSION;
}
headers[0] = type;
/* Use the default record version, if it is
* set.
*/
copy_record_version (session, htype, &headers[1]);
_gnutls_record_log
("REC[%x]: Sending Packet[%d] %s(%d) with length: %d\n", session,
(int) _gnutls_uint64touint32 (&session->connection_state.
write_sequence_number),
_gnutls_packet2str (type), type, sizeofdata);
if (sizeofdata > MAX_RECORD_SEND_SIZE)
data2send_size = MAX_RECORD_SEND_SIZE;
else
data2send_size = sizeofdata;
/* Only encrypt if we don't have data to send
* from the previous run. - probably interrupted.
*/
if (session->internals.record_send_buffer.length > 0)
{
ret = _gnutls_io_write_flush (session);
if (ret > 0)
cipher_size = ret;
else
cipher_size = 0;
cipher = NULL;
retval = session->internals.record_send_buffer_user_size;
}
else
{
/* now proceed to packet encryption
*/
cipher_size = data2send_size + MAX_RECORD_OVERHEAD;
cipher = gnutls_malloc (cipher_size);
if (cipher == NULL)
{
gnutls_assert ();
return GNUTLS_E_MEMORY_ERROR;
}
cipher_size =
_gnutls_encrypt (session, headers, RECORD_HEADER_SIZE, data,
data2send_size, cipher, cipher_size, type, 1);
if (cipher_size <= 0)
{
gnutls_assert ();
if (cipher_size == 0)
cipher_size = GNUTLS_E_ENCRYPTION_FAILED;
gnutls_afree (erecord);
gnutls_free (cipher);
return cipher_size; /* error */
}
retval = data2send_size;
session->internals.record_send_buffer_user_size = data2send_size;
/* increase sequence number
*/
if (_gnutls_uint64pp
(&session->connection_state.write_sequence_number) != 0)
{
session_invalidate (session);
gnutls_assert ();
gnutls_afree (erecord);
gnutls_free (cipher);
return GNUTLS_E_RECORD_LIMIT_REACHED;
}
ret =
_gnutls_io_write_buffered2 (session, erecord, erecord_size,
cipher, cipher_size);
gnutls_afree (erecord);
gnutls_free (cipher);
}
if (ret != cipher_size + erecord_size)
{
if (ret < 0 && gnutls_error_is_fatal (ret) == 0)
{
/* If we have sent any data then just return
* the error value. Do not invalidate the session.
*/
gnutls_assert ();
return ret;
}
if (ret > 0)
{
gnutls_assert ();
ret = GNUTLS_E_INTERNAL_ERROR;
}
session_unresumable (session);
session->internals.may_not_write = 1;
gnutls_assert ();
return ret;
}
session->internals.record_send_buffer_user_size = 0;
_gnutls_record_log ("REC[%x]: Sent Packet[%d] %s(%d) with length: %d\n",
session,
(int) _gnutls_uint64touint32 (&session->
connection_state.
write_sequence_number),
_gnutls_packet2str (type), type, cipher_size);
return retval;
}
